Audio Authority Cat 5 HDMI Extender System EDP-11 Manuale utente

IM-QM77/ HM76

MS-9899 (v1.x) Industrial Computer Board

ii

Preface

▍

Copyright Notice

The material in this document is the intellectual property of MICRO-STAR IN-

TERNATIONAL. We take every care in the preparation of this document, but no

guarantee is given as to the correctness of its contents. Our products are under

continual improvement and we reserve the right to make changes without notice.

Trademarks

All trademarks are the properties of their respective owners.

MSI

®

is registered trademark of Micro-Star Int’l Co.,Ltd.

NVIDIA

®

is registered trademark of NVIDIA Corporation.

ATI

®

is registered trademark of ATI Technologies, Inc.

AMD

®

is registered trademarks of AMD Corporation.

Intel

®

is registered trademarks of Intel Corporation.

Windows

®

is registered trademarks of Microsoft Corporation.

AMI

®

is registered trademark of Advanced Micro Devices, Inc.

Award

®

is a registered trademark of Phoenix Technologies Ltd.

Sound Blaster

®

is registered trademark of Creative Technology Ltd.

Realtek

®

is registered trademark of Realtek Semiconductor Corporation.

JMicron

®

is registered trademark of JMicron Technology Corporation.

Netware

®

is a registered trademark of Novell, Inc.

Revision History

Revision Revision History Date

v1.1 Modify Spec. 2012 / 11

Technical Support

If a problem arises with your system and no solution can be obtained from the

user’s manual, please contact your place of purchase or local distributor. Alterna-

tively, please try the following help resources for further guidance.

Visit the MSI website for FAQ, technical guide, BIOS updates,

driver updates, and other information:

http://www.msi.com/index.

php?func=service

Contact our technical staff at:

http://ocss.msi.com

￭

◙

iii

MS-9899

Safety Instructions

Always read the safety instructions carefully.

Keep this User’s Manual for future reference.

Keep this equipment away from humidity.

Lay this equipment on a reliable at surface before setting it up.

The openings on the enclosure are for air convection hence protects the

equipment from overheating. DO NOT COVER THE OPENINGS.

Make sure the voltage of the power source and adjust properly 110/220V

before connecting the equipment to the power inlet.

Place the power cord such a way that people can not step on it. Do not

place anything over the power cord.

Always Unplug the Power Cord before inserting any add-on card or mod-

ule.

All cautions and warnings on the equipment should be noted.

Never pour any liquid into the opening that could damage or cause electri-

cal shock.

If any of the following situations arises, get the equipment checked by ser-

vice personnel:

The power cord or plug is damaged.

Liquid has penetrated into the equipment.

The equipment has been exposed to moisture.

The equipment does not work well or you can not get it work according

to User’s Manual.

The equipment has dropped and damaged.

The equipment has obvious sign of breakage.

DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT UNCONDI-

TIONED, STORAGE TEMPERATURE ABOVE 60

o

C (140

o

F), IT MAY DAM-

AGE THE EQUIPMENT.

CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with

the same or equivalent type recommended by the manufacturer.

警告使用者:

這是甲類資訊產品，在居住的環境中使用時，可能會造成無線電干擾，在這種情

況下，使用者會被要求採取某些適當的對策。

廢電池請回收

For better environmental protection, waste batteries should be

collected separately for recycling special disposal.

￭

◯

￭

iv

Preface

▍

FCC-B Radio Frequency Interference Statement

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installa-

tion. This equipment generates, uses and can radiate radio frequency energy and,

if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that interfer-

ence will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one

or more of the measures listed below.

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

Consult the dealer or an experienced radio/television technician for help.

Notice 1

The changes or modications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

Notice 2

Shielded interface cables and A.C. power cord, if any, must be used in order to

comply with the emission limits.

VOIR LA NOTICE D’INSTALLATION AVANT DE RACCORDER AU RESEAU.

◯

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

this device may not cause harmful interference, and

this device must accept any interference received, including interference that

may cause undesired operation.

1)

2)

CE Conf ormity

Hereby, Micro-Star International CO., LTD declares that this device is

in compliance with the essential safety requirements and other relevant

provisions set out in the European Directive.

Micro-Star International

MS-9899

v

MS-9899

WEEE (Waste Electrical and Electronic Equipment) Statement

ENGLISH

To protect the global environment and as an environmentalist, MSI must re-

mind you that...

Under the European Union (“EU”) Directive on Waste Electrical and Electronic

Equipment, Directive 2002/96/EC, which takes effect on August 13, 2005,

products of “electrical and electronic equipment” cannot be discarded as mu-

nicipal waste anymore and manufacturers of covered electronic equipment will be obligated

to take back such products at the end of their useful life. MSI will comply with the product

take back requirements at the end of life of MSI-branded products that are sold into the EU.

You can return these products to local collection points.

DEUTSCH

Hinweis von MSI zur Erhaltung und Schutz unserer Umwelt

Gemäß der Richtlinie 2002/96/EG über Elektro- und Elektronik-Altgeräte dürfen Elektro-

und Elektronik-Altgeräte nicht mehr als kommunale Abfälle entsorgt werden. MSI hat

europaweit verschiedene Sammel- und Recyclingunternehmen beauftragt, die in die Eu-

ropäische Union in Verkehr gebrachten Produkte, am Ende seines Lebenszyklus zurück-

zunehmen. Bitte entsorgen Sie dieses Produkt zum gegebenen Zeitpunkt ausschliesslich

an einer lokalen Altgerätesammelstelle in Ihrer Nähe.

FRANÇAIS

En tant qu’écologiste et an de protéger l’environnement, MSI tient à rappeler ceci...

Au sujet de la directive européenne (EU) relative aux déchets des équipement électriques

et électroniques, directive 2002/96/EC, prenant effet le 13 août 2005, que les produits

électriques et électroniques ne peuvent être déposés dans les décharges ou tout simple-

ment mis à la poubelle. Les fabricants de ces équipements seront obligés de récupérer

certains produits en n de vie. MSI prendra en compte cette exigence relative au retour des

produits en n de vie au sein de la communauté européenne. Par conséquent vous pouvez

retourner localement ces matériels dans les points de collecte.

РУССКИЙ

Компания MSI предпринимает активные действия по защите окружающей среды,

поэтому напоминаем вам, что....

В соответствии с директивой Европейского Союза (ЕС) по предотвращению

загрязнения окружающей среды использованным электрическим и электронным

оборудованием (директива WEEE 2002/96/EC), вступающей в силу 13 августа 2005

года, изделия, относящиеся к электрическому и электронному оборудованию, не могут

рассматриваться как бытовой мусор, поэтому производители вышеперечисленного

электронного оборудования обязаны принимать его для переработки по окончании

срока службы. MSI обязуется соблюдать требования по приему продукции, проданной

под маркой MSI на территории EC, в переработку по окончании срока службы. Вы

можете вернуть эти изделия в специализированные пункты приема.

vi

Preface

▍

ESPAÑOL

MSI como empresa comprometida con la protección del medio ambiente, recomienda:

Bajo la directiva 2002/96/EC de la Unión Europea en materia de desechos y/o equipos

electrónicos, con fecha de rigor desde el 13 de agosto de 2005, los productos clasicados

como “eléctricos y equipos electrónicos” no pueden ser depositados en los contenedores

habituales de su municipio, los fabricantes de equipos electrónicos, están obligados a

hacerse cargo de dichos productos al termino de su período de vida. MSI estará com-

prometido con los términos de recogida de sus productos vendidos en la Unión Europea

al nal de su periodo de vida. Usted debe depositar estos productos en el punto limpio

establecido por el ayuntamiento de su localidad o entregar a una empresa autorizada para

la recogida de estos residuos.

NEDERLANDS

Om het milieu te beschermen, wil MSI u eraan herinneren dat….

De richtlijn van de Europese Unie (EU) met betrekking tot Vervuiling van Electrische en

Electronische producten (2002/96/EC), die op 13 Augustus 2005 in zal gaan kunnen

niet meer beschouwd worden als vervuiling. Fabrikanten van dit soort producten wor-

den verplicht om producten retour te nemen aan het eind van hun levenscyclus. MSI zal

overeenkomstig de richtlijn handelen voor de producten die de merknaam MSI dragen

en verkocht zijn in de EU. Deze goederen kunnen geretourneerd worden op lokale inza-

melingspunten.

SRPSKI

Da bi zaštitili prirodnu sredinu, i kao preduzeće koje vodi računa o okolini i prirodnoj sredini,

MSI mora da vas podesti da…

Po Direktivi Evropske unije (“EU”) o odbačenoj ekektronskoj i električnoj opremi, Direktiva

2002/96/EC, koja stupa na snagu od 13. Avgusta 2005, proizvodi koji spadaju pod “elek-

tronsku i električnu opremu” ne mogu više biti odbačeni kao običan otpad i proizvođači

ove opreme biće prinuđeni da uzmu natrag ove proizvode na kraju njihovog uobičajenog

veka trajanja. MSI će poštovati zahtev o preuzimanju ovakvih proizvoda kojima je istekao

vek trajanja, koji imaju MSI oznaku i koji su prodati u EU. Ove proizvode možete vratiti na

lokalnim mestima za prikupljanje.

POLSKI

Aby chronić nasze środowisko naturalne oraz jako rma dbająca o ekologię, MSI przy-

pomina, że...

Zgodnie z Dyrektywą Unii Europejskiej (“UE”) dotyczącą odpadów produktów elektryc-

znych i elektronicznych (Dyrektywa 2002/96/EC), która wchodzi w życie 13 sierpnia 2005,

tzw. “produkty oraz wyposażenie elektryczne i elektroniczne “ nie mogą być traktowane

jako śmieci komunalne, tak więc producenci tych produktów będą zobowiązani do odbi-

erania ich w momencie gdy produkt jest wycofywany z użycia. MSI wypełni wymagania

UE, przyjmując produkty (sprzedawane na terenie Unii Europejskiej) wycofywane z użycia.

Produkty MSI będzie można zwracać w wyznaczonych punktach zbiorczych.

vii

MS-9899

TÜRKÇE

Çevreci özelliğiyle bilinen MSI dünyada çevreyi korumak için hatırlatır:

Avrupa Birliği (AB) Kararnamesi Elektrik ve Elektronik Malzeme Atığı, 2002/96/EC Kara-

rnamesi altında 13 Ağustos 2005 tarihinden itibaren geçerli olmak üzere, elektrikli ve elek-

tronik malzemeler diğer atıklar gibi çöpe atılamayacak ve bu elektonik cihazların üreti-

cileri, cihazların kullanım süreleri bittikten sonra ürünleri geri toplamakla yükümlü olacaktır.

Avrupa Birliği’ne satılan MSI markalı ürünlerin kullanım süreleri bittiğinde MSI ürünlerin

geri alınması isteği ile işbirliği içerisinde olacaktır. Ürünlerinizi yerel toplama noktalarına

bırakabilirsiniz.

ČESKY

Záleží nám na ochraně životního prostředí - společnost MSI upozorňuje...

Podle směrnice Evropské unie (“EU”) o likvidaci elektrických a elektronických výrobků

2002/96/EC platné od 13. srpna 2005 je zakázáno likvidovat “elektrické a elektronické

výrobky” v běžném komunálním odpadu a výrobci elektronických výrobků, na které se

tato směrnice vztahuje, budou povinni odebírat takové výrobky zpět po skončení je-

jich životnosti. Společnost MSI splní požadavky na odebírání výrobků značky MSI,

prodávaných v zemích EU, po skončení jejich životnosti. Tyto výrobky můžete odevzdat

v místních sběrnách.

MAGYAR

Annak érdekében, hogy környezetünket megvédjük, illetve környezetvédőként fellépve az

MSI emlékezteti Önt, hogy ...

Az Európai Unió („EU”) 2005. augusztus 13-án hatályba lépő, az elektromos és elek-

tronikus berendezések hulladékairól szóló 2002/96/EK irányelve szerint az elektromos és

elektronikus berendezések többé nem kezelhetőek lakossági hulladékként, és az ilyen

elektronikus berendezések gyártói kötelessé válnak az ilyen termékek visszavételére

azok hasznos élettartama végén. Az MSI betartja a termékvisszavétellel kapcsolatos

követelményeket az MSI márkanév alatt az EU-n belül értékesített termékek esetében,

azok élettartamának végén. Az ilyen termékeket a legközelebbi gyűjtőhelyre viheti.

ITALIANO

Per proteggere l’ambiente, MSI, da sempre amica della natura, ti ricorda che….

In base alla Direttiva dell’Unione Europea (EU) sullo Smaltimento dei Materiali Elettrici ed

Elettronici, Direttiva 2002/96/EC in vigore dal 13 Agosto 2005, prodotti appartenenti alla

categoria dei Materiali Elettrici ed Elettronici non possono più essere eliminati come riuti

municipali: i produttori di detti materiali saranno obbligati a ritirare ogni prodotto alla ne del

suo ciclo di vita. MSI si adeguerà a tale Direttiva ritirando tutti i prodotti marchiati MSI che

sono stati venduti all’interno dell’Unione Europea alla ne del loro ciclo di vita. È possibile

portare i prodotti nel più vicino punto di raccolta

viii

Preface

▍

CONTENTS

Copyright Notice �� ii

Trademarks �� ii

Revision History �� ii

Technical Support �� ii

Safety Instructions �� iii

FCC-B Radio Frequency Interference Statement �� iv

CE Conf ormity �� iv

WEEE (Waste Electrical and Electronic Equipment) Statement �� v

Chapter 1 Overview �� 1-1

Mainboard Specications ........................................................................... 1-2

Mainboard Layout ...................................................................................... 1-4

Chapter 2 Hardware Setup�� 2-1

Quick Components Guide .......................................................................... 2-2

CPU (Central Processing Unit) .................................................................. 2-3

Back Panel I/O ...........................................................................................2-8

Connector ................................................................................................ 2-10

Jumper .....................................................................................................2-17

Slot ........................................................................................................... 2-19

Chapter 3 BIOS Setup �� 3-1

Entering Setup ........................................................................................... 3-2

The Menu Bar ............................................................................................ 3-4

Main ........................................................................................................... 3-5

Advanced ...................................................................................................3-6

Boot .......................................................................................................... 3-12

Security ....................................................................................................3-13

Chipset ..................................................................................................... 3-18

Power ....................................................................................................... 3-20

Save & Exit .............................................................................................. 3-22

▍

Thank you for choosing the IM-QM77/ IM-HM76, the

excellent in-dustrial computer boards from MSI.

Based on the innovative Intel

®

QM77/ HM76 chipsets

for optimal system efciency, the IM-QM77 accommo-

dates the Intel

®

Core™i7 / i5 / i3 or Celeron

®

proces-

sor in rPGA-989 (Socket G2) and supports 2 DDR3

1067/1333/1600 DIMM slots to provide the maximum

of 16GB memory capacity.

The IM-QM77/ HM76 are durable under extreme envi-

ronments and suitable to be applied in every industrial

eld, such as digital signage, kiosk, gaming, industrial

control automation and POS.

Chapter 1

Overview

1-2

Overview

▍

Mainboard SpecificationS

CPU

Intel

®

Core™i7 / i5 / i3 or Celeron

®

processor in

rPGA-989 (Socket G2)

■

Chipset

SKU1: Intel

®

QM77 Chipset

SKU2: Intel

®

HM76 Chipset

■

Memory

2 unbuffered non-ECC DDR3 1067/1333/1600

DIMM slots

Supports the maximum of 16GB

■

LAN

Intel

®

82579LM Gigabit Fast Ethernet controller

Intel

®

82583V Gigabit Fast Ethernet controller (QM77

only)

■

Audio

Realtek

®

ALC887 VD2-CG Codec■

RAID

Supports RAID 0/ 1/ 5/ 10 (QM77)■

Graphics

Graphics integrated in Intel

®

processor

2 independent displays supported by SNB

3 independent displays supported by IVB

(QM77)

■

-

Back

Panel I/O

Back Panel I/O

1 PS/2 mouse and keyboard combo port

1 serial port

1 HDMI port (QM77 only)

1 VGA port

1 DVI-D ports (QM77 only)

2 USB 3.0 ports

4 USB 2.0 ports

2 Gigabit LAN jacks (QM77) /

1 Gigabit LAN jack (HM76)

3 exible audio ports (QM77) /

2 exible audio ports (HM76)

■

-

1-3

MS-9899

Onboard

Connec-

tors/Pin-

headers

Onboard Connectors/Pinheaders

1 USB 3.0 pinheader (2 ports)

1 USB 2.0 pinheader (2 ports)

2 SATA 6Gb/s ports

2 SATA 3Gb/s ports

3 serial port connectors

4 serial port power jumpers (QM77)

1 serial port power jumpers (HM76)

1 front panel pinheader

1 chassis intrusion connector

1 GPIO connector

1 LVDS connector

1 LVDS power jumper

1 amplier pinheader

1 eDP port (QM77)

1 S/PDIF out pinheader

■

-

Slot

1 PCIe x 16 slot

1 mini PCIe x 1 slot

1 mSATA 3Gb/s port

1 CFast slot (QM77)

■

Form Fac-

tor

Mini-ITX: 17.0cm x 17.0cm■

Environ-

mental

Operating Temperature: 0

o

C to 60

o

C

Storage Temperature: -20

o

C to 80

o

C

Humidity: 0% ~ 95% RH, Non-Condensing

■

1-4

Overview

▍

Mainboard Layout

Power Connector

GPIO Connector

JDP1 Connector

LVDS Power Jumper

SATA Connectors

DIMM Slots

Back Panel

Front Panel

Connector

USB 2.0 Connector

Chassis Intrusion

Connector

LVDS Connector

COMPort

Connectors

CPU Fan Connector

CPU Socket

Audio power am-

plier Connector

PCIe x16 Slot

JSPI1 Connector

COM Port

Power

Jumpers (*)

Clear

CMOS

Jumper

S/PDIF Connector

USB 3.0 Connector

Mini PCIe x1 Slot

mSATA Slot

COM Port

Power Jumper

eDP Connector (*)

CPU Power Connector

System Fan Connector

AT/ ATX

Jumper

DVI-D Port

(*)

HDMI Port

(*)

LAN

Ports

USB 3.0

Ports

Line-In (*)

COM Port

Line-Out

MIC

Keyboard / Mouse

Comob Port

D-Sub Port

USB 2.0

Ports

USB 2.0

Ports

LAN

Ports

(*)

(*) For QM77 only.

1-5

MS-9899

CFast Slot (*)

This chapter provides you with the information on

mainboard hardware congurations. Incorrect setting

of jumpers and connectors may damage your main-

board. Please pay special attention not to connect

these headers in wrong direction. DO NOT adjust any

jumper while the mainboard is powered on.

Chapter 2

Hardware Setup

2-2

Hardware Setup

▍

Quick coMponentS Guide

JGPIO1, p2-13

PCIe Slot, p.2-19

JSPD1, p.2-15

J1, p.2-17

JPWR1, p.2-7

SATA1~4, p.2-10

DIMM Slot, p.2-6

Back Panel

I/O, p.2-8

JFP1, p.2-12

CPUFAN1, p.2-11

JUSB1, p.2-12

JCMOS1,

p.2-17

JLVDS1, p.2-11

JAMP1, p.2-14

CPU, p.2-3

JSPI1, p.2-13

JCMV2~4,

p.2-18 (*)

PWRCONN1, p.2-7

JDP1, p.2-15

J4, p.2-14

SLOT3, p.2-19

SLOT1, p.2-19

JCASE1, p2-10

COM2~4,

p.2-13

SYSFAN2, p.2-11

J2, p.2-18

CONN1, p.2-16 (*)

JATX1,

p.2-18

(*) For QM77 only.

2-3

MS-9899

cpu (centraL proceSSinG unit)

When you are installing the CPU, make sure that you install the cooler

to prevent overheating. If you do not have the CPU cooler, consult your

dealer before turning on the computer.

Important

Overheating

Overheating can seriously damage the CPU and mainboard. Always

make sure the cooling fans work properly to protect the CPU from over-

heating. Be sure to apply an even layer of thermal paste (or thermal tape)

between the CPU and the heatsink to enhance heat dissipation.

Replacing the CPU

When replacing the CPU, always turn o the system’s power supply and

unplug the power supply’s power cord to ensure the safety of the CPU.

2-4

Hardware Setup

▍

CPU Installation

Locate the CPU socket on the mainboard. On the upper end of the CPU

socket is a socket actuator in the form of a slotted screw head.

To install the CPU, follow the steps shown below:

Loosen the socket actuator with the parallel screw driver.

Locate the golden cut edge on where the CPU should be installed.

Align the correct CPU orientation and insert the CPU into the socket.

Note that the CPU will only t in the socket when the CPU orienta-

tion is correct. Do not use force to insert the CPU into the socket,

because it will damage the golden pins of the CPU.

Fasten the CPU screw with the parallel screw driver to steady the

CPU.

Important

Mainboard photos shown in this section are for demonstration only and

may dier from the actual look of your mainboard.

1.

2.

3.

4.

2-5

MS-9899

CPU Cooler Installation

When the CPU installation is completed, please install the CPU cooler to

prevent the CPU from overheating.

Remove the sticker lm from the CPU cooler backplate.

Paste the backplate to be in line with the holes on the reverse side

of the mainboard.

Place the CPU cooler onto the mainboard.

Screw it from corner to opposite corner not left to right or top to

bottom.

Plug in the fan power cable.

1

2

3

4

1.

2.

3.

4.

5.

2-6

Hardware Setup

▍

Memory

These DIMM slots are used fornstalling memory modules.

Unlock the DIMM slot by push-

ing the mounting clip to the side.

Vertically insert the memory

module into the DIMM slot. The

memory module has an o-cen-

ter notch on the bottom that will

only allow it to t one way into

the DIMM slot.

Push the memory module deep

into the DIMM slot. The plastic

clip at side of the DIMM slot will

automatically close when the

memory module is properly seat

and an audible click should be

heard.

Manually check if the memory

module has been locked in place

by the DIMM slot’s side clip.

Important

You can barely see the golden nger if the DIMM is properly inserted

in the DIMM slot.

To enable successful system boot-up, always insert the DIMM into the

DIMM1 rst.Power Supply

1.

2.

3.

•

La pagina sta caricando ...

Audio Authority Cat 5 HDMI Extender System EDP-11 Manuale utente

Questo manuale è adatto anche per

Audio Authority Cat 5 HDMI Extender System EDP-11 Manuale utente

in altre lingue

Altri documenti