Electrolux EI24EC15KS Manuale utente

Marca: Electrolux

Modello: EI24EC15KS

Tipo: Manuale utente

318 205 608 (1109) Rev. A

Use & Care Guide

Electric Cooktop

TABLE OF CONTENTS

Welcome & Congratulations ...................................2

Important Safety Instructions .................................3

Surface Cooking ....................................................5

Before Setting Surface Controls ..............................7

Setting Surface Controls ........................................8

Care & Cleaning (Cleaning Chart) .........................11

Care & Cleaning ..................................................12

Before You Call ..................................................14

Major Appliance Warranty ....................................15

WELCOME & CONGRATULATIONS



NOTE

Please attach sales receipt here for future reference.

Please record your model and serial numbers

below for future reference.

Model Number:

Serial Number:

Purchase Date:

Printed in China

Congratulations on your purchase of a new appliance! At

Electrolux Home Products, we are very proud of our

product and are completely committed to providing you

with the best service possible. Your satisfaction is our

number one priority.

We know you’ll enjoy your new appliance and Thank You

for choosing our product. We hope you consider us for

future purchases.

PLEASE CAREFULLY READ AND SAVE THESE

INSTRUCTIONS

This Use & Care Manual contains general operating

instructions for your appliance and feature information

for several models. Your product may not have

all the described features. The graphics shown are

representative. The graphics on your appliance may not

look exactly like those shown. These instructions are not

meant to cover every possible condition and situation

that may occur. Common sense and caution must be

practiced when installing, operating and maintaining any

appliance.

Product Registration

Serial Plate Location

Cooktop Serial

Plate Location

Cooktop Serial

Plate Location

The PRODUCT

REGISTRATION CARD



signed and returned to

Electrolux Home Products.

IMPORTANT SAFETY INSTRUCTIONS

WARNING

This symbol will help alert you to situations

that may cause serious bodily harm, death or

property damage.

IMPORTANT

IMPORTANT indicates installation, operation or

maintenance information which is important but not

hazard-related.

CAUTION

This symbol will help alert you to situations that

may cause bodily injury or property damage.

DEFINITIONS

This is the safety alert symbol. It is used to alert

you to potential personal injury hazards. Obey all safety

messages that follow this symbol to avoid possible injury

or death.

•Storage on Appliance. Flammable materials

should not be stored near surface units. This

includes paper, plastic and cloth items, such as



liquids. Do not store explosives, such as aerosol cans, on

or near the appliance. Flammable materials may explode



CAUTION

Do not store items of interest to children in the

cabinets above the appliance. Children climbing on

the cooktop to reach items could be seriously injured.

•Donotleavechildrenalone.Childrenshouldnot

be left alone or unattended in the area where an

appliance is in use. They should never be allowed to

sit or stand on any part of the appliance.

•DONOTTOUCHSURFACEUNITSORAREASNEAR

THESE UNITS. Surface units may be hot even though

they are dark in color. Areas near surface units may

become hot enough to cause burns. During and after

       



time to cool. Among these areas are the cooktop and

areas facing the cooktop.

•Wear Proper Apparel. Loose-tting or hanging

garments should never be worn while using the

appliance. Do not let clothing or other flammable

materials contact hot surfaces.

WARNING

Never use your appliance for warming or heating

the room.

•Do Not Use Water or Flour on Grease Fires.

Smother the re with a panlid, or use baking

soda,adrychemicalorfoam-typeextinguisher.

• When heating fat or grease, watch it closely. Fat or



• Use Only Dry Pot holders. Moist or damp pot

holders on hot surfaces may result in burns from

steam. Do not let the pot holders touch hot surface

units. Do not use a towel or other bulky cloth instead of

a pot holder.

• Do Not Heat Unopened Food Containers. Buildup

of pressure may cause the container to burst and

result in injury.

•Removealltapeandpackagingwrapbeforeusing

the appliance. Destroy the carton and plastic bags

after unpacking the appliance. Never allow children

to play with packaging material.

• Proper Installation. Be sure your appliance is

properly installedand grounded by a qualied

technician in accordance with the National

Electrical Code No. 70 - latest edition in the

United States, or CSA C22.1, Part 1 in Canada, and

local code requirements. Install only per installation

instructions provided in the literature package for this

appliance.

 

an authorized repair service. Know how to disconnect the

electrical power to the appliance at the circuit breaker or

fuse box in case of an emergency.

•UserServicing.Donotrepairorreplaceanypart

oftheapplianceunlessspecicallyrecommended

in the manuals. All other servicing should be done only



injury and damage to the appliance.

•Never modify or alter the construction of an

appliance such as removal of panels, wire covers

or any other permanent part of the appliance.

Read all instructions before using this appliance.

Save these instructions for future reference.

IMPORTANT SAFETY INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS FOR USING

YOUR COOKTOP

•Knowwhichknobcontrolseachsurfaceunit.

•Cleantheappliance regularly to keep all parts

freeofgreasethatcouldcatchre.Exhaust fan

ventilation hoods and grease filters should be kept

clean. Do not allow grease to accumulate on hood or





manufacturer's instructions for cleaning.

Use Proper Pan Size. This appliance is equipped

with one or more surface units of different sizes. Select



surface unit. The use of undersized utensils will expose a

portion of the surface heating unit to direct contact and

may result in ignition of clothing. Proper relationship of



• Utensil Handles Should Be Turned Inward and

Not Extend Over Adjacent Surface Units. To reduce



spillage due to unintentional contact with the utensil.

• Never Leave Surface Units Unattended. Boilovers

cause smoking and greasy spillovers that may ignite, or

a pan that has boiled dry may melt.

• Protective Liners. Do not use aluminum foil to line

any part of the appliance. Only use aluminum foil as

recommended for baking if used as a cover placed on

the food. Any other use of protective liners or aluminum



circuit.

•GlazedCookingUtensils. Only certain types of glass,

glass/ceramic, ceramic, earthenware, or other glazed

utensils are suitable for range top service without

breaking due to the sudden change in temperature.

Check the manufacturer’s recommendations for cooktop

use.

•Do NotUseDecorativeSurfaceElement Covers.

If an element is accidentally turned on, the decorative

cover will become hot and possibly melt. Burns will occur

if the hot covers are touched. Damage may also be done

to the appliance.

FOR COOKTOP WITH COIL ELEMENTS ONLY

•Do Not immerse or Soak Removable Surface

Heating Elements. Surface heating elements should

never be immerse in water. Heating elements clean

themselves during normal operation.

•MakeSureDripPansorDripBowlsareinPlace.

Absence of these pans or bowls during cooking may

subject wiring or components underneath to damage.

FORCERAMIC-GLASSCOOKTOPONLY

•Do Not Clean or Operate a Broken Cooktop. If

cooktop should break, cleaning solutions and spillovers

may penetrate the broken cooktop and create a

       

immediately.

•CleanCooktopwithCaution.If a wet sponge or cloth

is used to wipe spills on a hot cooking area, be careful to

avoid a steam burn. Some cleaners can produce harmful

fumes if applied to a hot surface.

•Do Not Place Hot Cookware on Cold Cooktop

Glass. This could cause glass to break.

•Donotslidepanacrossthecooktopsurface.They

may scratch the cooktop surface.

•DoNotLetPansBoilDry. This may cause permanent

damage in the form of breakage, fusion, or marking

that can affect the ceramic-glass cooktop (This type of

damage is not covered by your warranty).

IMPORTANT SAFETY NOTICE

The California Safe Drinking Water and Toxic



to publish a list of substances known to the state to

cause cancer, birth defects or other reproductive harm,

and requires businesses to warn customers of potential

exposure to such substances.

SAVE THESE INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONSIMPORTANT SAFETY INSTRUCTIONS

SURFACE COOKING

Selecting Surface Cooking Cookware



contact with the entire surface heating element. Check



cookware (See Figure 1).

Cookware Material types

The cookware material determines how evenly and

quickly heat is transferred from the surface element to

the pan bottom. The most popular materials available

are:

ALUMINUM - Excellent heat conductor. Some types

of food will cause it to darken (Anodized aluminum

cookware resists staining & pitting). If aluminum pans

slide across the ceramic glass cooktop, they may leave

metal marks which will resemble scratches. Remove

these marks immediately.

COPPER - Excellent heat conductor but discolors easily.

May leave metal marks on ceramic glass (see Aluminum

above).

STAINLESS STEEL - Slow heat conductor with uneven

cooking results. Is durable, easy to clean and resists

staining.

CAST IRON - A poor heat conductor however will retain

heat very well. Cooks evenly once cooking temperature is

reached. Not recommended for use on ceramic cooktops.

PORCELAIN-ENAMELonMETAL - Heating

characteristics will vary depending on base material.

Porcelain-enamel coating must be smooth to avoid

scratching ceramic cooktops.

GLASS - Slow heat conductor. Not recommended for

ceramic cooktop surfaces because it may scratch the

glass.

Figure 1

Figure 2



NOTE



setting needed for best cooking results.

Be sure to follow the recommendations for using

cookware as shown in Figure 2.

CORRECT



sides.





not tilt pan. Pan is well

balanced.



amount of food to be

prepared and the size

of the surface element.



conducts heat well.





diameter to element

surface diameter.

INCORRECT

  

bottoms.

   

more than one-half inch.

    

element.

   

pan.

SURFACE COOKING

Specialty Pans & Trivets

Woks



are available in most cookshop or hardware stores.

Round-bottomed woks (with a support ring that does

not extend beyond the heating element) may also be

used. The metal ring was designed to support the wok



making) or fat (frying).

DO NOT use a wok if it is equipped with a metal ring

that extends beyond the surface element. Because

this ring traps heat, the surface element and cooktop

surface could be damaged.

For glass smoothtop models,



(without support rings) may

be used.

Wire trivets:

Do not use wire trivets. Cookware bottoms

must be in direct contact with the surface elements.

CAUTION

DO NOT use two elements (if the cooktop is not equipped

with bridge element) to heat one large pan such as a

roaster or griddle, or allow cooking utensils to boil dry.

The bottom surface of the pan in either of these situations

could cause discoloring or crazing of the porcelain enamel

range surface, and damage to the surface elements and/

or damage to the drip pans (if equipped).

CAUTION

Canning can generate large amounts of steam. Use

extreme caution to prevent burns. Always raise the lid

to vent steam away from you.

Prevent damage to cooktop and burner grates:

1. Do not use water bath or pressure canners that

extend more than one inch beyond the edge of the

burner grate.

2. Do not leave water bath or pressure canners on

high heat for an extended amount of time.

3. Alternate surface units between each batch to

allow the units and surrounding surfaces to cool

down. Try to avoid canning on the same burner

unit all day.

Safe canning requires that harmful micro-organisms are

destroyed and the jars are sealed completely. When

canning in a water bath canner, a gentle but steady boil

must be maintained continuously for the required time.

Canning Tips & Information

1. Use tested recipes and follow instructions carefully.

Check with your local Cooperative Agricultural

Extension Service or a manufacturer of glass jars for

the latest canning information.

 



3. Center canner on the burner grate.

4. Start with hot water and a high heat setting to

reduce the time it takes to bring the water to a boil;

then reduce the heat setting as low as possible to

maintain a constant boil.

5. It is best to can small amounts and light loads.

BEFORE SETTING SURFACE CONTROLS

Ceramic Glass Cooktop (some models)

The ceramic cooktop has radiant surface elements

located below the surface of the glass. The design of

the ceramic cooktop outlines the area of the surface

element underneath. Make sure the diameter of the

pan matches the diameter of the element outline on the

cooktop.

Heat is transferred up through the surface of the cooktop



be used. The type and size of cookware, the number

of surface elements in use and their settings are all

factors that will affect the amount of heat that will

spread to areas beyond the surface elements. The areas

surrounding the elements may become hot enough to

cause burns.



NOTE

Please read detailed instructions for ceramic glass

cooktop cleaning in the General Care & Cleaning

section and Before You Call checklist section of this



About the Radiant Surface Elements

The element temperature rises gradually and evenly.

As the temperature rises, the element will glow red. To

maintain the selected setting, the element will cycle ON

and OFF. The heating element retains enough heat to

provide a uniform and consistent heat during the OFF

OFF the element several

minutes before cooking is complete. This will allow

residual heat to complete the cooking process.

Types of the heating elements used

Your cooktop is equipped with radiant surface radiant

elements with different wattage ratings. The ability to

heat food quicker and in larger volumes increases as the

element wattage increases. Depending on model, three

types of heating units may be found under the ceramic

glass cooktop:

– Regular (single coil) radiant elements of various

diameters or shapes.

– Expandable type (double circuits) radiant elements of

various diameters or shapes.

– Bridge Expandable type (triple circuits) radiant

elements of various diameters or shapes.

CAUTION

The cooktop should not be used as a cutting board or

work surface.

Dropping heavy or hard objects on the cooktop may crack it.

Pans with rough bottoms may scratch the cooktop surface.

Placing foods directly on the smoothtop surface

(without cooking utensil) is not recommended as





Never use the griddle or similar cooking sheet on the

ceramic glass cooktop.



NOTE

Due to the high intensity of heat generated by the

surface elements, the glass surface will turn green

when the element will be turned off. This phenomenon

is normal and the glass will come back to its original

white color after it has completely cooled down. (White

glass cooktops only).

SETTING SURFACE CONTROLS

Surface cooking settings

Use the chart to determine the correct setting for the

type of food you are preparing.

Note: 

the setting needed for best cooking results.

Recommended Setting for Surface Element

Setting Type of Cooking

 Start most foods; bring water to a boil

and pan broiling.



(7-8)

Continue a rapid boil; frying, deep fat

frying.

MEDIUM (4-6) Maintain a slow boil; thicken sauces

and gravies; steaming vegetables.

MEDIUM LOW

(2 - 3)

Keep foods cooking; poaching and

stewing.

LOW (LO) Keep warm, melting and simmering.



NOTE

Ceramic Glass Cooktop only: Radiant elements have

a limiter that allows the element to cycle on and off,

even at the HI setting. This helps to prevent damage

to the ceramic smooth top. Cycling at the HI setting is

normal and can occur if the cookware is too small for



CAUTION

Do not place plastic items such as salt and pepper

shakers, spoon holders or plastic wrappings on

cooktop when it is in use. These items could melt or

ignite. Potholders, towels or wooden spoons could catch



CAUTION

Do not allow aluminum foil, or ANY material that

can melt to make contact with the ceramic glass

cooktop. If these items melt on the cooktop they will

damage the ceramic cooktop.



NOTE

See Recommended Setting for Surface Element table on

page 6.

Operating the Single Surface

Elements (All models)

To Operate the Single Surface Elements

1. Place correctly sized cookware on the surface

element.

2. Push in and turn the surface control knob in either

direction to the desired setting (Figure 1).

3. Turn the knob to adjust the setting if desired. Start

most cooking operations on a higher setting and then



element provides a constant amount of heat at each

setting. Ceramic Glass Cooktop Only: A glowing

red surface heating area extending beyond the

bottom edge of the cookware indicates the cookware

is too small for the surface heating area.

4. When cooking has completed, turn the surface

control knob to OFF before removing the

cookware.



NOTE

The “Hot Surface” indicator lights will glow when the

element is turned on and will continue to glow after the

control knob is turned to the "OFF" position. It will glow



The glass surface may still be hot and burns may

occur if the glass surface is touched before the indicator

light has turned OFF. The message may remain on even

though the controls are turned OFF.

Figure1-Controlknobshownistypicalonly.

SETTING SURFACE CONTROLS

Operating the Dual Surface Radiant

Element (SpecicCeramicGlassCooktop

models only)

The cooktop is equipped with one or two dual radiant

surface element. Symbols around the knob are used to

indicate which coil of the dual radiant element will heat.

The small digits on the control knob indicate that only the

inner coil will heat (Fig. 1). The large digits on the control

knobs indicate that both inner and outer coils will heat

(Fig. 2). You may switch from either coil setting at any

time during cooking.

To Operate the Dual Surface Element

1. Place correctly sized cookware on the dual surface

element.

2. Push in and turn the control knob as shown in Figure 1

for smaller cookware or in Figure 2 for larger cookware.

3. Turn the knob to adjust the setting if needed. Start

most cooking operations on a higher setting and then



element provides a constant amount of heat at each

setting. A glowing red surface heating area extending

beyond the bottom edge of the cookware indicates the

cookware is too small for the surface heating area.

4. When cooking has completed, turn the surface

control knob to OFF before removing the

cookware.

Figure 1 Figure 2

Control knobs shown are typical only.

Indicator lights (Some models)

Some models have an indicator light for each heating

unit, other models have an indicator light for each pair of

heating units, also some other models have an indicator

light for all heating units.

The indicator light glows as soon as a heating unit is

turned on. Check if the indicator light glows when the

control knob of the individual heating unit is turned on.

If the knob is set to a very low temperature setting, the

indicator may glow and yet, the heating unit may not be

heating at all. If this happens, turn the knob to a higher

setting until the heating unit comes on.



lights in an easy check to be sure all the control knobs

have been turned OFF.

Hot Surface Indicator Light

(Ceramic Glass Cooktop models only)

Some models have an indicator light located on the

ceramic glass cooktop that glows as soon as the glass

begins to warm up. When the heating unit is turned

off, it will continue to glow as long as the glass remains

warm enough to cause burns. Other models have a hot

surface indicators per element arranged in a cluster. Their

location is as shown in the illustration.

(Typical 30" cooktop shown)

Hot Surface

Indicator

Lights

SETTING SURFACE CONTROLS

Operating the Warm Zone Feature

(Some Ceramic Glass Cooktop models only)

To operate the warm zone

Your appliance is equipped with a warm zone. The

purpose of the warm zone is to keep hot cooked foods at

serving temperature. Always start with hot food. It is not

recommended to heat cold food on the warm zone.

Use the warm zone to keep cooked foods hot such

as: vegetables, gravies, casseroles, soups, stews,

breads, pastries and oven-safe dinner plate.

All food placed on the warm zone should be covered

with lid or aluminum foil to maintain quality. For best

results, when warming pastries or breads, the cover

should have an opening to allow moisture to escape. Do

not use plastic warp to cover food. Plastic may melt onto



Use only dishware, utensils and cookware recommended

for oven and cooktop use on the warm zone.

CAUTION

Unlike the surface elements, the warm zone will not

glow red when it is hot. Always use potholders or oven

mitts when removing food from the warm zone as

cookware and plates will not be hot

Indicator lights

The hot surface indicator light, located under the cooktop,

will come on when the control is set and will continue to

glow until the glass cooktop has cooled down to moderate

level.

To Set the Warm Zone Control

1. To set the control, push in and turn the knob. The

temperatures are approximate, and are designate by

HI, MED and LO. However, the control can be set at

any position between HI and LO for different levels of

heating.

2. When done, turn the control to OFF. The warm zone

will remain warm until the hot surface indicator light

goes off.

Temperature Selection

Refer to the chart for recommended heating levels. If a

particular food is not listed, start with the medium level,

and adjust as needed. Most food can be kept at serving

temperatures by using the medium level

Warm Zone Recommended Food Settings Chart

Food Item Heating Level

Breads/Pastries LO

Casseroles LO

Dinner Plate with Food LO

Eggs LO

 LO

Meats MED

Sauces MED

Soups (cream) MED

Stews MED

Vegetables MED

Fried Foods HI

Hot Beverages HI

Soups (liquid) HI

Surfaces How to Clean

Aluminum (Trim Pieces) Use hot, soapy water and a cloth or paper towel. Dry with a clean cloth.



Control Knobs, Body Parts, and

Decorative Trim



grease, apply a liquid detergent directly onto the soil. Leave on soil for 30 to 60 minutes.

Rinse with a damp cloth and dry. DO NOT use abrasive cleaners on any of these materials;



cooktops may also be used.

Control Panel

Wipe the control panel clean after each use. Before cleaning the control panel, turn all

controls to OFF and remove the control knobs. To remove, pull each knob straight off the

shaft. Clean using hot, soapy water and a cloth. Be sure to squeeze excess water from the

cloth before wiping the panel; especially when wiping around the controls. Excess water in or

around the controls may cause damage to the appliance. To replace knobs after cleaning, line



Surface Elements and Drip Bowls

Surface elements can be unplugged and removed to make cleaning the drip bowls easier. The

surface elements clean themselves when they are turned on. Food spilled on a hot element

will burn off. Food spilled on a cool element can be cleaned with a damp cloth—any remaining

soil will burn off the next time the element is used. NEVER IMMERSE A SURFACE ELEMENT IN

WATER. To remove surface elements and drip bowls, follow the instructions under General

Cleaning.

To clean drip bowls, wash in hot, soapy water or in the dishwasher. Rinse and dry while still

warm. Hard-to-remove, burned-on soils can be removed by soaking the drip bowls for about

20 minutes in a slightly diluted liquid cleanser or a solution made of equal parts ammonia and

water. A nylon scrubber may be used after soaking. DO NOT use abrasive cleansers or steel

wool, as they will scratch the surface. Always rinse with clean water and polish, and dry with

a soft cloth or paper towel. To replace drip bowls and surface elements, follow the instructions

under General Cleaning.

Porcelain Enamel

Cooktop





towel for 30 to 40 minutes. Rinse with clean water and a damp cloth, and then scrub with a



cleaners or the porcelain may become damaged during future heating. DO NOT use spray

oven cleaners on the cooktop.

Stainless Steel, Chrome (brushed)

Decorative Trim Cooktop

Cover stubborn spots with an ammonia-soaked paper towel for 30 to 40 minutes. Rinse with

clean water and a cloth. A soapy, nylon mesh scouring pad may be used carefully on stainless

steel; not on chrome. Cleaners made especially for stainless steel, chrome or copper are also

recommended. Do not use metal-type scouring pads on brushed chrome. This could cause

the brushed chrome to change to a yellowish tint. Rinse all cleaners before operating cooktop.

Bluish stains may result due to heat combining with the cleaning material and they cannot be

removed.



Cooktop

See Ceramic-GlassCooktop

CARE & CLEANING

Cleaning Various Parts of Your Cooktop

Before cleaning any part of the cooktop, be sure all controls are turned OFF and the cooktop is COOL. REMOVE SPILLOVERS





Ceramic Glass Cooktop Cleaning &

Maintenance

Consistent and proper cleaning is

essential to maintaining your Ceramic

glass cooktop.

Sliding aluminum or copper clad bottom pans on the

cooktop can cause metal markings on the cooktop

surface. These marks should be removed immediately

after the cooktop has cooled using the cooktop cleaning

cream. Metal marks can become permanent if not

removed prior to future use.

Cookware (cast iron, metal, ceramic or glass) with rough

bottoms can mark or scratch the cooktop surface. Do

not slide anything metal or glass across the cooktop.

Do not use your cooktop as a cutting board or work

surface in the kitchen. Do not cook foods directly on the

cooktop surface without a pan. Do not drop heavy or

hard objects on the glass cooktop, or they may crack it.

CARE & CLEANING

Cleaning Recommendations for the

Ceramic Glass Cooktop

For light to moderate soil:

Apply a few drops of CookTop® Cleaning Creme directly

to the cooktop. Use a paper towel or use a non-

abrasive plastic type no-scratch pad to clean the

entire cooktop surface. Make sure the cooktop is cleaned

thoroughly, leaving no residue.

For heavy, burned on soil:

Apply a few drops of CookTop® Cleaning Creme directly

to the soiled area. Rub the soiled area using a non-

abrasive plastic type no-scratch pad, applying pressure

as needed. Do not use the pad you use to clean the

cooktop for any other purpose.

WARNING

DO NOT use a cooktop cleaner on a hot cooktop.

The fumes can be hazardous to your health, and can

chemically damage the ceramic glass surface.

CAUTION

Before cleaning the cooktop, be sure the controls are

turned to OFF and the cooktop is COOL.

IMPORTANT

Damage to the ceramic glass cooktop may occur if you

use an abrasive type scratch pad. Only use cleaning



ceramic glass cooktop.

If soils remain, carefully scrape soils with a metal razor

blade scraper, holding scraper at a 30 degree angle to the

surface. Remove loosened soils, then apply a few drops

of cleaning cream and buff surface clean.



time, apply the recommended CERAMA

BRYTE® Cleaning Creme to the

ceramic surface. Clean and buff with

a non abrasive cloth or pad. This will

make cleaning easier when soiled from

cooking. The special cooktop cleaning



glass to help prevent scratches and

abrasions.

CARE & CLEANING

Do not use the following on the ceramic glass

cooktop:

• Donotuseabrasivecleanersandscouringpads,

such as metal and some nylon pads. They may

scratchthecooktop,makingitmoredifcultto

clean.

• Donotuseharshcleaners,suchaschlorine

bleach, ammonia or oven cleaners, as they may

etch or discolor the cooktop.

WARNING

Never leave covers on the coil elements as they could be

permanently damaged if turned on by accident.

CAUTION

Before cleaning the cooktop, be sure the controls are

turned to OFF and the cooktop is COOL.

CAUTION

When lowering the lift-up cooktop, grasp the sides with



drop or bend the cooktop when raising or lowering. This

could damage the surface.

• Donotusedirty

sponges, cloths or

paper towels, as they

can leave soil or lint on

the cooktop which can

burn and cause Special

Caution for Aluminum

Foil and Aluminum

Cooking Utensils

Plastic or foods with a high sugar content:

These types of soils need be removed immediately if spilled

or melted onto the ceramic cooktop surface. Permanent

damage (such as pitting of the cooktop surface) may occur

if not removed immediately. After turning the surface

elements OFF, use a razor blade scraper or a metal spatula

with a mitt and scrape the soil from the hot surface (as

illustrated). Allow the cooktop to cool, and use the same

method for heavy or burned on soils.

Coil Elements Cooktop Cleaning &

Maintenance

Care and Cleaning of Stainless Steel

Some models are equipped with stainless steel exterior

parts. Special care and cleaning are required for

maintaining the appearance of stainless parts. Refer

to the General Care & Cleaning table for detailed

cleaning instructions.

Prior to cleaning the coil

elements make sure they

are cold and that control

knobs are set at OFF.

Never immerse the coil

elements in water.

To Remove and Replace Surface

Elements and Drip Bowls

(some models)

To Remove

1. Lift up edge of surface element across from terminal

end just enough to clear the edge of the drip bowl.



3. Lift the drip bowl up and out.

To Replace

1. Line up the opening of the drip bowl with the terminal plug.

2. Hold the surface element as level as possible and slide

the terminal end through the opening and into the

terminal plug.

3. Be sure the surface element is level to reduce the

hazard of pans sliding off the element.

To Raise the Top for Cleaning



have a lift-up rod to support the top in its raised position.

Lift the top only high enough to allow the support rod



raised rod.

2. Clean underneath using a clean cloth and hot, soapy

water.



has a support rod, lower the support rod, then gently

lower the cooktop into the frame.

• Aluminum foil

Use of aluminum foil will damage the cooktop. Do not

use under any circumstances.

• Aluminum utensils

Since the melting point of aluminum is much lower

than that of other metals, care must be taken when

aluminum pots or pans are used. Pans that boil dry

may permanently damage cooktop by breaking, fusing

to, or marking it.

CAUTION

Be careful not to bend

terminal ends when replacing

elements after cleaning.

IMPORTANT

Before you call for service, review this list. It may save you time and expense. The list includes common

occurrences that are not the result of defective workmanship or materials in this appliance.

OCCURRENCE POSSIBLE CAUSE/SOLUTION

Entire cooktop does

not operate.

House fuse has blown or circuit breaker has tripped. Check/reset breaker or replace fuse. If



Service wiring not complete. Contact installation agent or dealer.

Power outage. Check house lights to be sure. Call local electric company.

Surface element

does not heat.

No power to appliance. Check/reset breaker or replace fuse. If the problem is a circuit

overload, or improper connection of the armored cable supplied with the appliance, have this



Too low heat setting. Turn control to a slightly higher setting until element comes on.

Incorrect control is on. Be sure to use correct control for the element to be used.

Surface element

too hot or not hot

enough.

Incorrect control setting. Raise or lower setting until proper amount of heat is obtained. Dial

markings are an indicator of relative heat settings and will vary slightly.



heavyweight cookware.





bottom heat better than warped pans. Cookware material affects heating. Heavy and medium

weight pans heat evenly. Because lightweight pans heat unevenly, foods may burn easily.

Food not heating

evenly.



Incorrect control setting. Raise or lower setting until proper amount of heat is obtained.

Scratches or

abrasions on

ceramic glass

cooktop surface.

Coarse particles (such as salt or sand) are between cooktop and utensil. Be sure cooktop

surface and bottom of utensils are clean before use. Small scratches do not affect cooking

and will become less visible with use.

Cleaning materials not recommended for glass ceramic cooktop have been used. See

Ceramic-GlassCooktop



Selecting Surface Cooking Utensils

Metal marks on

ceramic glass

cooktop surface.

Sliding or scraping of metal utensils on cooktop surface. Do not slide metal utensils on

cooktop surface. Use a mildly abrasive cleanser to remove marks.

Brown streaks and

specks on ceramic

glass cooktop

surface.

Boilovers have cooked onto surface. Use razor blade scraper to remove soil. See Ceramic-

Glass Cooktop 

Cleaning materials not recommended for ceramic-glass cooktop have been used. Use

recommended cleaners and cleaning method. See Ceramic-GlassCooktopsection in this



Areas of

discoloration on

ceramic glass

cooktop surface.

Mineral deposits from water and food. Wet surface with water and sprinkle on a cooktop

cleaning creme. Scrub with a clean damp paper towel until the stain disappears. Wipe

remaining paste away, then apply a small amount of cooktop cleaning creme and polish with

a clean paper towel. Use cookware with clean, dry bottoms. See Ceramic-GlassCooktop



BEFORE YOU CALL (Solutions to Common Problems)

COOKTOP WARRANTY Your cooktop is protected by this warranty

In the U.S.A., your appliance is warranted by Electrolux Home Products North America, a division of White Consolidated Industries,

Inc. We authorize no person to change or add to any of our obligations under this warranty. Our obligations for service and parts

under this warranty must be performed by us or an authorized Electrolux Home Products North America servicer. In Canada, your

appliance is warranted by Electrolux Canada Corp.

This warranty applies only to products in ordinary household use, and the consumer is

responsible for the items listed below:

1. Proper use of the appliance in accordance with instructions provided with the product.

2. Proper installation by an authorized servicer in accordance with instructions provided with the

appliance and in accordance with all local plumbing, electrical and/or gas codes.

 

repair of loose connections or defects in house wiring.

4. Expenses for making the appliance accessible for servicing, such as removal of trim, cupboards,

shelves,etc., which are not a part of the appliance when it was shipped from the factory.

 

 

This warranty does not cover the following:

 



NOTE: Some states do not allow the exclusion or limitation of incidental or consequential damages,

so this limitation or exclusion may not apply to you.

2. Service calls which do not involve malfunction or defects in workmanship or material, or for

appliances not in ordinary household use. The consumer shall pay for such service calls.

3. Damages caused by services performed by servicers other than Electrolux Home Products North

America or its authorized servicers; use of parts other than genuine Electrolux Home Products

parts; obtained from persons other than such servicers; or external causes such as abuse, misuse,



4. Products with original serial numbers that have been removed or altered and cannot be readily

determined.

Keep your bill of sale, delivery slip, or some other appropriate payment record. The date on the bill

establishes the warranty period should service be required. If service is performed, it is in your best



also have other rights that vary from state to state. Service under this warranty must be obtained by

contacting Electrolux Home Products.

*NORMAL

RESPONSIBILITIES

OF THE CONSUMER

EXCLUSIONS

IF YOU NEED

SERVICE

USA

1•800•944•9044

Electrolux Home Products, Inc.,

10200 David Taylor Drive

Charlotte, NC 28262

Canada

1•866•294•9911

Electrolux Home Products, Inc.,



L’Assomption, Québec

J5W 1T6

This warranty only applies in the 50 states of the U.S.A.,



described or illustrated are subject to change without notice.

All warranties are made by Electrolux Home Products North

America, a division of White Consolidated Industries, Inc. In

Canada, your appliance is warranted by Electrolux Canada

Corp.

WARRANTY

PERIOD

THROUGH OUR AUTHORIZED

SERVICERS, WE WILL:

THE CONSUMER WILL BE

RESPONSIBLE FOR:

FULLONE-YEAR

WARRANTY

One year

from original

purchase date

Pay all costs for repairing or replacing any parts

of this appliance which prove to be defective

in materials or workmanship.

Costs of service calls that are listed under

NORMAL RESPONSIBILITIES OF THE

CONSUMER. *

LIMITED 2

-5

YEAR WARRANTY

(Glass

Smoothtop, Seal

& Elements)

Second through



from original

purchase date

Provide a replacement for any defective surface

heating element, deteriorated rubberized-

silicone seal (upswept models only), or glass

smoothtop that cracks due to thermal breakage

(not customer abuse).

Diagnostic and any transportation and

labor costs which are required because of

service.

LIMITED

WARRANTY

(Applicable to the

State of Alaska)

Time periods

listed above.

All of the provisions of the full and limited

warranties above and the exclusion listed

below apply.

Costs of the technician’s travel to the

home and any costs for pick up and

delivery of the appliance required because

of service.

MAJOR APPLIANCE WARRANTY

Manuel d’utilisation et d’entretien

Table de cuisson électrique

318 205 608 (1109) Rev. A

TABLE DES MATIÈRES

Bienvenue & félicitations ........................................2

Mesures de sécurité importantes ............................3

Surface de cuisson ................................................5

Avant de régler les éléments de surface ..................7

Réglage des éléments de surface ...........................8

Entretien & nettoyage (Tableau de nettoyage) .......11

Entretien & nettoyage ..........................................12

Avant d’appeler le service ...................................14

Garantie des appareils électroménagers ................15

BIENVENUE & FÉLICITATIONS



NOTE

Apposez ici votre reçu pour toute référence future.

Inscrivez ci-dessous les numéros de modèle et

de série de votre appareil.

Numéro de modèle:

Numéro de série:

Date d’achat:

Félicitations, vous venez d’acheter un nouvel appareil!

Chez Electrolux Home Products, nous sommes très

ers de nos produits et nous nous engageons à vous

fournir le meilleur service possible. Vous satisfaire

constitue la première de nos priorités.

Nous savons que votre nouvel appareil vous plaira et

nous vous remercions d’avoir choisi nos produits. Nous

espérons que vous nous ferez conance pour vos futurs

achats.

LISEZ ATTENTIVEMENT CES INSTRUCTIONS ET

CONSERVEZ-LES PRÉCIEUSEMENT.

Ce manuel donne des instructions générales pour votre

appareil et des renseignements s’appliquant à plusieurs

modèles. Votre appareil peut ne pas avoir toutes les

caractéristiques décrites. Les gures montrées dans ce

manuel sont représentatives et peuvent ne pas illustrer

exactement les caractéristiques de votre appareil. Les

instructions données dans ce guide ne couvrent pas

toutes les conditions et situations possibles. Faites preuve

de bon sens et de prudence lors de l’installation, de

l’emploi et de l’entretien de tout appareil ménager.

Enregistrement de l’appareil

Emplacement de

la plaque de série

Emplacement

de la plaque

de série

Emplacement

de la plaque

de série

Enregistrer l’appareil

La CARTE D’ENREGISTREMENT

doit être remplie en entier et

retournée à Electrolux Canada

Corp.

Imprimé en Chine

MESURES DE SÉCURITÉ IMPORTANTES

AVERTISSEMENT

Ce symbole vous prévient des situations qui

risquent d’entraîner de graves blessures, la mort

ou des dommages matériels.

IMPORTANT

Ce sont des informations d’installation, d’opération et

d’entretien importantes mais qui ne présentent pas

de situations pouvant entraîner des blessures ou des

dommages matériels.

ATTENTION

Ce symbole vous prévient des situations pouvant

entraîner des blessures ou dommages matériels.

DEFINITIONS

Ceci est un symbole d’avertissement. Il est utilisé pour

vous prévenir d’une situation de blessures possibles. Faites

attention aux messages de sécurité qui suivent ce symbole

an d’éviter des blessures graves ou la mort.

ATTENTION

Ne rangez pas des articles pouvant intéresser les

enfants dans les armoires au-dessus de l’appareil.

•Enleveztoutlerubanetlematérield’emballage

avant d’utiliser l’appareil. Détruisez le cartonnage

et les sacs en plastique après le déballage de

l’appareil. Ne laissez jamais les enfants jouer avec le

matériel d’emballage.

•Installation: Assurez-vous que l’appareil est

correctement installé et mis à la terre par un

technicienqualié, conformément à ladernière

édition n° 70 ANSI/NFPA du National Electrical

Code aux États Unis, ou au Canada, à la norme

C22.1 de l’ACNOR, code canadien de l’électricité,

partie 1, ainsi qu’aux codes de la région. N’installez

l’appareil que selon les instructions d’installation fournies

dans la documentation.

Demandez à votre marchand de vous recommander

un technicien qualié ainsi qu’un centre de réparation

autorisé. Sachez comment couper le gaz au compteur et

couper le courant électrique de la table de cuisson à la

boîte de fusibles ou au coupe-circuit en cas d’urgence.

•Entretien par l’usager—Ne réparez pas ou ne

remplacez pas des pièces de l’appareil à moins

d’une recommandation précise dans les guides.

Toutes les réparations doivent être faites par un

technicien qualié, an de réduire les risques de blessure

et de dommage à l’appareil.

•

Nemodiezjamaisl’appareil,quecesoitenenlevant

despanneaux,protège-ls,outouteautrepièce.

Lisez ces instructions avant d’utiliser l’appareil.

Conservez ces instructions pour références futures.

•Nelaissezpaslesenfantssanssurveillancedans

un lieu où un appareil fonctionne. Ne les laissez

jamais s’asseoir ou se tenir debout sur une pièce

quelconque de l’appareil.

•NE TOUCHEZ PAS AUX ÉLÉMENTS DE SURFACE OU

AUX ZONES À PROXIMITÉ DE CEUX-CI. Les éléments

de surface peuvent être très chauds même s’ils sont de

couleur foncée. Les zones près des éléments peuvent

devenir sufsamment chaudes pour causer des brûlures.

Pendant et après toute utilisation, ne touchez pas et ne

laissez pas vos vêtements ou autres produits inammables

venir en contact avec ces zones à moins qu’elles aient eu

le temps de se refroidir. Ces zones comprennent la surface

de cuisson et les surfaces orientées vers elle.

•Portez des vêtements appropriés—Ne portez

jamais des vêtements amples ou flottants en

utilisant cet appareil. Ne laissez pas les matériaux

inammables et les vêtements venir en contact avec les

surfaces chaudes.

•Rangementsurl’appareil—Ne rangez pas surla

table de cuisson ou près des brûleurs de surface,

desmatériauxinammables. Ceci inclut des papiers,

plastiques, tissus, livres de cuisine, objets en plastique

et torchons, ainsi que des liquides inammables. N’y

posez pas des produits explosifs comme des bombes en

aérosol. Les produits inammables pourraient exploser

et allumer un feu ou causer des dommages matériels.

•N’éteignezpaslesfeuxdefritureavecdel’eauou

delafarine—Étouffezlesfeuxavecuncouvercle

ou du bicarbonate de soude, ou avec un extincteur

à poudre sèche ou à mousse.

•Enchauffantdel’huileoudelagraisse,restezprès

de l’appareil. La graisse ou l’huile peuvent prendre feu

si elles devenaient trop chaudes.

•N’utilisezquedesgantsisolantssecs—Desgants

isolants mouillés ou humides en contact avec des

surfaces chaudes peuvent causer des brûlures par

la vapeur. Ne laissez pas les gants isolants toucher les

brûleurs ou la amme. Ne vous servez pas de torchon ni

de chiffon à la place d’un gant isolant.

•Neréchauffezpasdescontenantsnonouverts—

L’accumulation de pression peut faire exploser le

contenant et blesser.

AVERTISSEMENT

N’utilisezjamaisvotre appareil pourréchauffer

ou chauffer une pièce.

MESURES DE SÉCURITÉ IMPORTANTES

AVIS DE SÉCURITÉ IMPORTANT

Le décret Californien de régulation des déchets toxiques et

de la qualité de l’eau potable demande au Gouvernement

de la Californie de rendre publique l’énumération

des substances causant le cancer, les malformations

congénitales ou autres dommages de reproduction connues

à l’état, et exige que les entreprises avertissent leurs clients

des risques potentiels d’exposition à ces substances.

INSTRUCTIONS DE SÉCURITÉ IMPORTANTES POUR

L’UTILISATION DE VOTRE TABLE DE CUISSON

•Vousdevezsavoirquelboutoncommandechacun

des éléments de la surface de cuisson.

•Nettoyez régulièrement votre appareil pour

enlever la graisse sur toutes ses parties, car

cette graisse risque de prendre feu. Le ventilateur

d’évacuation des hottes et les ltres de graisse doivent

demeurer propres en tout temps. Ne laissez pas la

graisse s’y accumuler. Les accumulations de graisse

dans le ventilateur pourraient prendre feu. Mettez le

ventilateur en marche lorsque vous faites amber des

aliments. Reportez-vous aux instructions du fabricant sur

le nettoyage de la hotte.

•Utilisezlagrosseurdecasserolesappropriée. Cet

appareil est équipé d’un ou de plusieurs éléments de

différentes grosseurs. Choisissez les ustensiles ayant

un dessous plat, assez large pour recouvrir l’élément

chauffant. Si vous utilisez des ustensiles trop petits, une

partie de l’élément sera à découvert, et les vêtements

entrant directement en contact avec l’élément sont

susceptibles de prendre feu. L’utilisation d’ustensiles

d’une taille proportionnelle à l’élément améliore aussi le

rendement.

• Lespoignéesdesustensilesdoiventêtretournées

vers l’intérieur, sans surplomber les éléments

adjacents,an de réduire les risques de brûlures, de

combustion et de renversement causés par le contact

involontaire avec l’ustensile.

• Ne laissezjamaisles élémentsde surfacesans

surveillance. Les débordements peuvent causer de la

fumée, les éclaboussures de graisse sont susceptibles

de prendre feu et les ustensiles dont le contenu s’est

évaporé peuvent fondre.

• Protecteurs. N’utiliser pas de papier d’aluminium

pour recouvrir quelque partie que ce soit de la table

de cuisson. Toute autre utilisation de protecteurs ou de

papier d’aluminium est susceptible de causer un choc

électrique, un feu ou un court-circuit.

•Ustensiles vitrifiés. En raison des brusques

changements de température, on ne peut utiliser avec

la surface de cuisson que certains ustensiles en verre,

en vitrocéramique, en céramique ou en terre cuite, ou

autres ustensiles vitriés, sans risquer qu’ils se fendent.

Vériez les recommandations du fabricant quant à leurs

utilisations sur une surface de cuisson.

•

N’utilisez pas de couvercles décoratifs pour

éléments de surface. Si un élément est allumé, le

couvercle risque de chauffer et éventuellement de fondre.

Vous ne verrez pas que l’élément est allumé. Vous risquez

de vous brûler en touchant les couvercles. Aussi, il y a

risque d’endommagement de la surface de cuisson.

POUR SURFACE DE CUISSON AVEC ÉLÉMENTS DE

SURFACE AMOVIBLES SEULEMENT

• N’immergez pas et ne trempez pas les éléments de

surface amovibles. Ils se nettoient d’eux-mêmes lors

d’un fonctionnement normal.

• Assurez-vous que les cuvettes de propreté sont en place,

sinon les ls ou pièces se trouvant en dessous risquent

d’être endommagés par la cuisson.

POUR SURFACE DE CUISSON VITROCÉRAMIQUE

SEULEMENT

• Ne nettoyez pas ou ne cuisinez pas sur une surface

de cuisson brisée. Si la surface se brise, les solutions

nettoyantes et les éclaboussures peuvent pénétrer dans

la plaque de cuisson brisée, et créer un risque de choc

électrique. Communiquez avec un technicien qualié

immédiatement.

• Nettoyez soigneusement la plaque de cuisson.

Si une éponge ou un chiffon humide est utilisé pour

essuyer des renversements sur une surface chaude,

faites attention an d’éviter de vous brûler par la vapeur.

Certains nettoyants peuvent produire de la fumée nocive

s’ils sont appliqués sur une surface chaude.

• Ne déposez pas d’ustensiles chauds sur la vitre

froide de la table de cuisson. Cela pourrait la briser.

• Ne faites pas glisser les plats sur la surface de

vitrocéramique. Ils peuvent causer des éraures en

surface.

• Ne laissez pas les plats s’évaporer à sec - Ceci peut

causer des dommages permanents tels que bris, fusion

ou marques sur la surface en vitrocéramique (Ce type de

dommage n’est pas couvert par la garantie).

La pagina sta caricando ...

Electrolux EI24EC15KS Manuale utente

Marca: Electrolux

Modello: EI24EC15KS

Tipo: Manuale utente

Scarica il pdf

rapporto

in altre lingue

English: Electrolux EI24EC15KS User manual
français: Electrolux EI24EC15KS Manuel utilisateur

Documenti correlati

Electrolux High Speed Grill Manuale utente

Electrolux EI24EC15KS Manuale utente

Electrolux EI24EC15KS Manuale utente

in altre lingue

Documenti correlati

Altri documenti