LG 26LC51 Manuale utente

담 당 관리자

MODEL

BRAND

Printing Specification

1. Trim Size (Format) : 185mm x 260 mm

2. Printing Colors

• Cover :

1 COLOR (BLACK)

• Inside : 1 COLOR (BLACK)

3. Stock (Paper)

• Cover : Coated paper, Snow White 150 g/㎡

• Inside : Uncoated paper , 백상지 60 g/㎡

4. Printing Method : Off-set

5. Bindery : Perfect bind

6. Language : English / German / French / Italian / Spanish / Portuguese

/ Netherlands / Greek / Hungarian/ Polish/ Czech/ Slovak/ Romanian/ Bulgarian

/ Swedish/ Norwegian/ Finnish/ Danish/ Estonia/ Lithuania/ Latvia/Slovenian (22)

7. Number of pages : 444

Model Description

Part No.

2.

User’s Guide Specification

1.

User’s Guide Specification

Changes

4.

REV.

NO.

MM/DD/YY

SIGNATURE

CHANGE NO.

CHANGE CONTENTS

SUFFIX

LG

MFL37396705

(0709-REV05)

(1) Origin Notification

* LGEIN : Printed in Indonesia * LGEWA : Printed in U.K.

* LGESP : Printed in Brazil * LGEMX : Printed in Mexico

* LGEND : Printed in China * LGEIL : Printed in India

* LGEMA : Printed in Poland

Special Instructions3.

Product Name

EU

1

2

3

4

5

7

6

8

SHIN HJ

07.02.13.

KIM JO

07.02.13.

This part contain Eco-hazardous substances (Pb, Cd, Hg, Cr6+, PBB, PBDE, etc.) within LG standard level,

Details should be followed Eco-SCM management standard[LG(56)-A-2524].

Especially, Part should be followed and controlled the following specification.

(1) Eco-hazardous substances test report should be submitted when Part certification test and First Mass Production.

(2) Especially, Don’t use or contain lead(Pb) and cadmium(Cd) in ink.

Notes

42/50PC51-ZB

37/42LC41_51-ZA

42/50PC51

37/42LC41_51

03/23/07

SHIN.H.J

S7-76579

Update Polish Proofreading

05/21/07

SONG.J.S

S7-83053

1. Added the sentence about protection film.

2. Amended Country fuction.

07/25/07

SONG.J.S

S7-90045

Added the models.(26LC3RA-ZA)

08/13/07

SONG.J.S

S7-90869

Added the 42PC5RV-ZD models.

09/13/07

SONG.J.S

S7-94818

Added the models except Hebrew.

(42PC5RVC-ZD/32LC44-ZB/32LC54-ZD/42LC54-ZD)

Pagination sheet

P/NO. MFL37396705

Total pages : 444 pages

LG(EN)

P/no

LG(EN) LG(GE)

LG(GE) LG(FR)

LG(FR) LG(IT)

Front coverBack cover

Front cover

Back cover

Blank

1

…. 17

…

Blank

17

1

…

Blank

17

1

…

Blank

19

1

Front cover

LG(IT) LG(SP)

Front cover

Back cover

…

Blank

17

1

LG(SP) LG(PO)

Front cover

Back cover

…

Blank

17

1

LG(PO) LG(NE)

Front cover

Back cover

…

Blank

17

1

LG(NE) LG(GR)

Front cover

Back cover

…

Blank

17

1

LG(GR) LG(HU)

Front cover

Back cover

…

Blank

17

1

LG(HU) LG(PL)

Front cover

Back cover

…

Blank

17

1

LG(PL) LG(CZ)

Front cover

Back cover

Pagination sheet

P/NO. MFL37396705

Total pages : 444 pages

LG(CZ) LG(SK)

LG(SK) LG(RO)

LG(RO) LG(BU)

Front coverBack cover

Front cover

Back cover

Blank

1

…. 17

… 17

Blank 1

LG(BU) LG(SW)

Front cover

Back cover

… 17

Blank 1

LG(SW) LG(NO)

Front cover

Back cover

… 17

Blank 1

LG(NO) LG(FI)

Front cover

Back cover

… 17

Blank 1

LG(FI) LG(DA)

Front cover

Back cover

… 17

Blank 1

LG(DA) LG(EE)

Front cover

Back cover

… 17

Blank 1

LG(EE) LG(LT)

Front cover

Back cover

… 17

Blank 1

LG(LT) LG(LA)

Front cover

Back cover

Pagination sheet

P/NO. MFL37396705

Total pages : 444 pages

LG(LA) LG(SV)

Front coverBack cover

Blank

1

…. 17

…

Blank

17

1

Back cover

LG(SV)

BlankBlank

An extended Owner’s Manual that contains information on the advanced fea-

tures of these LG TV sets is located on the CD- ROM provided in an electronic

version.

To read these files, you will need to use a Personal Computer (PC) equipped

with a CD- ROM drive.

Please read this manual carefully before operating your set.

Retain it for future reference.

Record model number and serial number of the set.

See the label attached on the back cover and quote

this information to your dealer when you require service.

LCD TV

PLASMA TV

OWNER’S MANUAL

LCD TV MODELS

26LC4

*

32LC4

*

37LC4

*

42LC4

*

26LC3

*

PLASMA TV MODELS

42PC5

*

42PC5RV

*

50PC5

*

26LC5*

32LC5*

37LC5*

42LC5*

P/NO : MFL37396705 (0709-REV05)

Printed in Korea

1

ENGLISH

SAFETY INSTRUCTIONS

• Please read these safety precautions carefully before using the product.

• In this manual, illustrations shown may differ slightly from your product.

If these warning messages are ignored, you risk serious injury, accident or death.

If these caution messages are ignored, you risk injury or damage to the product.

PPrreeccaauuttiioonn iinn IInnssttaalllliinngg tthhee PPrroodduucctt

WARNING

CAUTION

Keep away from heat sources like electrical heaters.

- Electrical shock, fire, malfunction or deformation may occur.

If you can smell smoke, or other odors, or hear a

strange sound; unplug the power cord and contact the

service center.

- If you continue to use without taking proper measures, elec-

trical shock or fire can occur.

Do not use the product in a damp place such as a bath-

room or any place where it is likely to get wet.

- This may cause a fire or could give an electric shock.

Install the product on a flat and stable place that

has no risk of dropping the product.

- If the product is dropped, you may be injured or the

product may be damaged.

Keep the product away from direct sunlight.

- The product could be damaged.

Do not place the product in a built-in installation

such as bookcase or cabinet.

- Ventilation required.

EElleeccttrriiccaall PPoowweerr RReellaatteedd PPrreeccaauuttiioonnss

Make sure to connect the power cable to an electrical

ground.

- You may be electrocuted or injured.

Do not touch the power plug with wet hands.

Additionally, it the cord pin is wet or covered with

dust, dry the power plug completely or wipe dust off.

- You may be electrocuted due to excess moisture.

During a thunder or lightning storm, unplug the

power cable or signal cable.

- You may be electrocuted or a fire could break out.

Protect the power cord from physical or mechanical

abuse, such as being twisted, kinked, pinched, closed in

a door, or walked upon. Pay particular attention to plugs,

wall outlets, and the point where the cord exits the

appliance.

PPrreeccaauuttiioonnss iinn MMoovviinngg tthhee PPrroodduucctt

Do not shock the product when moving it.

- You may be electrocuted or the product could be dam-

aged.

Make the panel face forward and hold it with both

hands to move.

- If you drop the product, the damaged product could

cause an electric shock or fire. Contact the service cen-

ter for repair.

Make sure to turn off the product.

Make sure to remove all cables before moving the

product.

- You may be electrocuted or the product could be dam-

aged.

PPrreeccaauuttiioonnss iinn UUssiinngg tthhee PPrroodduucctt

Do not disassemble, repair or modify the product in

any way.

- Fire or electrocution could occur.

- Contact the service center for check, calibration or

repair.

To reduce the risk of fire or electric shock, do not

expose this apparatus to rain or moisture.

The apparatus should not be exposed to dripping

or splashing and no objects filled with liquids, such

as vases, should be placed on the apparatus.

Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as if power supply cords or

plugs have been damaged, liquid has been spilt, objects

have fallen in the product, the product has been

exposed to rain or moisture, the product does not

operate normally, or the product has been dropped.

WARNING

CAUTION

WARNING

2

ENGLISH

FRONT PANEL CONTROLS

■

This is a simplified representation of the front panel. Here shown may be somewhat different from your TV.

■

If your product has a protection film attached, remove the film and then wipe the product with a polishing

cloth.

PROGRAMME Buttons

VOLUME Buttons

MENU Button

OK Button

INPUT Button

POWER Button

PR

VOL

OK

MENU

INPUT

PR

VOL

OK

MENU

INPUT

PR

VOL

OK

MENU

INPUT

/I

PROGRAMME Buttons

VOLUME Buttons

OK Button

MENU Button

INPUT Button

POWER Button

PREPARATION

Power/Standby Indicator

• illuminates red in standby mode.

• illuminates green when the set

is switched on.

Remote Control Sensor

3

ENGLISH

BACK PANEL INFORMATION

■

This is a simplified representation of the back panel. The illustrations shown here may differ slightly from your set.

AV 1 AV 2

ANTENNA

IN

VARIABLE AUDIO OUT

VIDEO

AUDIO

COMPONENT IN

AV IN 3

L/MONO

R

AUDIO

VIDEO

HDMI/DVI IN HDMI IN

12

RGB IN

S-VIDEO

AUDIO

(RGB/DVI)

RGB

(PC)

AV 1 AV 2

ANTENNA

IN

VARIABLE ARIABLE AUDIO OUTAUDIO OUT

VIDEOVIDEO

AUDIOAUDIO

COMPONENTCOMPONENT IN

AV IN 3

L/MONO

R

AUDIO

VIDEO

HDMI/DVI IN HDMI IN

1 2

RGB INRGB IN

S-VIDEO

AV 1 AV 2

ANTENNA

IN

VARIABLE

AUDIO OUT

VIDEO

AUDIO

COMPONENT IN

AV IN 3V IN 3

L/L/MONOMONO

R

AUDIOAUDIO

VIDEOVIDEO

HDMI/DVI IN HDMI IN

12

RGB IN

S-VIDEOS-VIDEO

AV IN 3V IN 3

L/L/MONOMONO

R

AUDIOAUDIO

VIDEOVIDEO

S-VIDEOS-VIDEO

12

VARIABLE

AUDIO OUT

RGB IN

COMPONENT IN

AUDIO

VIDEO

AV 1 AV 2

ANTENNA

IN

HDMI/DVI IN HDMI IN

AV IN 3

L/MONO

R

AUDIO

VIDEO

S-VIDEO

12

VARIABLE

AUDIO OUT

RGB IN

COMPONENT IN

AUDIO

VIDEO

AV 1 AV 2

ANTENNA

IN

HDMI/DVI IN HDMI IN

AV IN 3

L/MONO

R

AUDIO

VIDEO

S-VIDEO

12

VARIABLE

AUDIO OUT

RGB IN

COMPONENT IN

AUDIO

VIDEO

AV 1 AV 2

ANTENNA

IN

HDMI/DVI IN HDMI IN

AV IN 3

L/MONO

R

AUDIO

VIDEO

S-VIDEO

1 2

VARIABLEARIABLE

AUDIO OUTAUDIO OUT

RGB

(PC)

RGB INRGB IN

COMPONENT INCOMPONENT IN

AUDIOAUDIO

VIDEOVIDEO

AV 1V 1 AV 2V 2

ANTENNAANTENNA

IN IN

AUDIO

(RGB/DVI)

HDMI/DVI INHDMI/DVI IN HDMI INHDMI IN

3

HDMI Input

Connect a HDMI signal to HDMI IN.

Or DVI(VIDEO)signal to HDMI/DVI port with DVI

to HDMI cable.

RGB/Audio Input

Connect the monitor output from a PC to the

appropriate input port.

Component Input

Connect a component video/audio device to

these jacks.

Variable Audio Output

Connect an external amplifier or add a subwoofer

to your surround sound system.

Euro Scart Socket (AV1/AV2)

Connect scart socket input or output from an

external device to these jacks.

Antenna Input

Connect over-the-air signals to this jack.

Power Cord Socket

This TV operates on an AC power. The voltage is

indicated on the Specifications page. Never

attempt to operate the TV on DC power.

S-Video Input

Connect S-Video out from an S-VIDEO device.

Audio/Video Input

Connect audio/video output from an external

device to these jacks.

RS-232C Input

(CONTROL&SERVICE)Port

Connect the serial port of the control devices

to the RS-232C jack.

1

2

3

4

5

6

7

8

9

4 6

7

5

1

2

1

2

8

9

3

7

4 6

5

10

1 2

VARIABLEVARIABLE

AUDIO OUTAUDIO OUT

RGB

(PC)

RGB INRGB IN

A

U

DI

O

VIDE

O

AV 1AV 1 AV 2AV 2

ANTENNAANTENNA

IN IN

AUDIO

(RGB/DVI)

HDMI/DVI INHDMI/DVI IN HDMI INHDMI IN

RS-232C IN

(CONTROL & SERVICE)

1

2

3 4 6

5

10

AV IN 3V IN 3

VIDEOVIDEO

S-VIDEOS-VIDEO

12

VARIABLE

AUDIO OUT

RGB IN

COMPONENT IN

AUDIO

VIDEO

ANTENNA

IN

HDMI/DVI IN HDMI IN

L/MONOMONO

R

AUDIOAUDIO

AV 1 AV 2

8

9

AUDIO

(RGB/DVI)

RGB

(PC)

AV 1 AV 2

ANTENNA

IN

VARIABLE ARIABLE AUDIO OUTAUDIO OUT

VIDEOVIDEO

AUDIOAUDIO

COMPONENTCOMPONENT IN

AV IN 3

L/MONO

R

AUDIO

VIDEO

HDMI/DVI IN HDMI IN

1 2

RGB INRGB IN

S-VIDEO

RS-232C IN

(CONTROL & SERVICE)

3 4 6

5

1

2

10

4

ENGLISH

STAND INSTALLATION (Only 26, 32, 37 inch LCD TV models)

PREPARATION

1

2

3

Carefully place the product screen side down on

a cushioned surface that will protect product and

screen from damage.

Assemble the product stand with the product as

shown.

Install the 4 bolts securely, in the back of the

product in the holes provided.

5

ENGLISH

ATTACHING THE TV TO A WALL

Plasma TV models LCD TV models

2

1

■

This feature is not available for all models.

■

Set it up close to the wall so the product doesn’t fall over when it is pushed backwards.

■

The instructions shown below is a safer way to set up the product, which is to fix it on the wall so the

product doesn’t fall over when it is pulled in the forward direction. It will prevent the product from

falling for-ward and hurting people. It will also prevent the product from damage caused by fall. Please

make sure that children don’t climb on or hang from the product.

NOTE

!

GG

When moving the product to another place undo the ropes first.

GG

Use a product holder or a cabinet that is big and strong enough for the size and weight of the product.

GG

To use the product safely make sure that the height of the bracket that is mounted on the wall is same as

that of the product.

2

3

1

2

Use the eye-bolts or TV brackets/bolts to fix the product to the wall as shown in the picture.

(If your product has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the bolts.)

* Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.

Secure the wall brackets with the bolts (not provided as parts of the product, must purchase separately) on

the wall. Match the height of the bracket that is mounted on the wall.

3

Use a sturdy rope (not provided as parts of the product, must purchase separately) to tie the

product. It is safer to tie the rope so it becomes horizontal between the wall and the product.

6

PREPARATION

ENGLISH

■

The TV can be installed in various ways such as on a wall, or on a desktop etc.

■

The TV is designed to be mounted horizontally.

DESKTOP PEDESTAL INSTALLATION

For proper ventilation, allow a clearance of 4inches on each side from the wall.

4 inches

Power Supply

Short-circuit Breaker

GROUNDING

Ensure that you connect the earth ground wire to prevent possible electric shock. If grounding methods

are not possible, have a qualified electrician install a separate circuit breaker.

Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes.

7

ENGLISH

WALL MOUNT: HORIZONTAL INSTALLATION

For proper ventilation, allow a clearance of 4" on each side and from the wall. Detailed installation instruc-

tions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide.

4 inches

8

ENGLISH

WATCHING TV / PROGRAMME CONTROL

REMOTE CONTROL KEY FUNCTIONS

When using the remote control, aim it at the remote control sensor on the TV.

OK

INPUT MODE

TVTV

DVD

RATIO

EXIT

VOL

UPDATE

INDEX

PR

SLEEP

LIST

Q.VIEW

I/II

MENU

SIZE

VCR

POWER

123

456

789

*

0

FAV

REVEAL

?

TEXT

SIMPLINK

INPUT

MUTE

TIME

HOLD

POWER

TV INPUT

INPUT

Switches the set on from standby or off to standby.

Returns to the TV viewing from any mode.

Switches the set on from standby.

If you press the button once, the input source OSD

will appear on screen as shown. Press the

DD

/

EE

but-

ton and then OK button to select the desired input

source (TV, AV1 , AV2, AV3, Component , RGB PC,

HDMI1 or HDMI2).

RATIO

Brightness

adjustment

Selects your desired picture format.

Adjusts screen brightness.

It returns to the default settings brightness by changing

mode source.

SIMPLINK

SLEEP

I/II

Coloured

buttons

See a list of AV devices connected to TV.

When you toggle this button, the Simplink menu appears

at the screen.

Sets the sleep timer.

Selects the sound output.

These buttons are used for teletext (only

TTEELLEETTEEXXTT

models) or

PPrrooggrraammmmee eeddiitt

.

VCR/DVD

control buttons

Controls some video cassette recorders or DVD players

when you have already selected DVD or VCR mode button.

Control connected AV devices by pressing the

DD

//

EE

//

FF

//

GG

,

OOKK

buttons and buttons for play, stop, pause,

fast reverse, fast forward, chapter skip.

(The button does not provide such functions.)

EXIT

LIST

MENU

Q.VIEW

*

Clears all on-screen displays and returns to TV viewing

from any menu.

Displays the programme table.

Selects a menu.

Returns to the previously viewed programme.

No function

9

ENGLISH

Installing Batteries

■

Open the battery compartment cover on the back side and install

the batteries matching correct polarity

(

+with +,-with -

)

.

■

Install two 1.5V AA batteries. Don’t mix old or used batteries with

new ones.

■

Close cover.

OK

INPUT

MODE

TVTV

DVD

RATIO

EXIT

VOL

UPDATE

INDEX

PR

SLEEP

LIST

Q.VIEW

I/II

MENU

SIZE

VCR

POWER

123

456

789

*

0

FAV

REVEAL

?

TEXT

SIMPLINK

INPUT

MUTE

TIME

HOLD

1

MODE

Selects the remote operating modes.

TELETEXT

BUTTONS

These buttons are used for teletext.

For further details, see the ‘Teletext’ section.

THUMBSTICK

(Up/Down/Left

Right)

OK

Allows you to navigate the on-screen menus and adjust

the system settings to your preference.

Accepts your selection or displays the current mode.

VOLUME

UP/DOWN

FAV

MUTE

Programme

UP/DOWN

0~9 number

button

Adjusts the volume.

Displays the selected favourite programme.

Switches the sound on or off.

Selects a programme.

Selects numbered items in a menu.

10

ENGLISH

AV IN 3

L/ MONO

R

AUDIO

VIDEO

S-VIDEO

12

VARIABLE

AUDIO OUT

RGB IN

COMPONENT IN

AUDIO

VIDEO

AV 1 AV 2

ANTENNA

IN

HDMI/DVI IN HDMI IN

AV 1 AV 2

ANTENNA

IN

VARIABLE

AUDIO OUT

VIDEO

AUDIO

COMPONENT IN

AV IN 3

L/MONO

R

AUDIO

VIDEO

HDMI/DVI IN HDMI IN

12

RGB IN

S-VIDEO

AV IN 3

L/MONO

R

AUDIO

VIDEO

S-VIDEO

12

VARIABLE

AUDIO OUT

RGB IN

COMPONENT IN

AUDIO

VIDEO

AV 1 AV 2

ANTENNA

IN

HDMI/DVI IN HDMI IN

AV IN 3

L/MONO

R

AUDIO

VIDEO

S-VIDEO

12

VARIABLE

AUDIO OUT

RGB IN

COMPONENT IN

AUDIO

VIDEO

AV 1 AV 2

ANTENNA

IN

HDMI/DVI IN HDMI IN

WATCHING TV / PROGRAMME CONTROL

ANTENNA CONNECTION

■

For optimum picture quality, adjust antenna direction.

■

An antenna cable and converter are not supplied.

Multi-family Dwellings/Apartments

(Connect to wall antenna socket)

Single-family Dwellings /Houses

(Connect to wall jack for outdoor antenna)

Outdoor

Antenna

Wall

Antenna

Socket

RF Coaxial Wire (75 ohm)

UHF

Signal

Amplifier

VHF

■

In poor signal areas,to get better picture quality, install a signal amplifier to the antenna as shown above.

■

If signal needs to be split for two TVs,use an antenna signal splitter for connection.

■

To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment.

11

ENGLISH

Press the

VVOOLL ++//--

button to adjust the volume.

If you want to switch the sound off, press the

MMUUTTEE

button.

You can cancel the Mute function by pressing the

MMUUTTEE

,

VVOOLL ++//--

or

II//IIII

button.

PROGRAMME SELECTION

TURNING ON THE TV

OK

INPUT MODE

TVTV

DVD

RATIO

EXIT

VOL

UPDATE

INDEX

PR

SLEEP

LIST

Q.VIEW

I/II

MENU

SIZE

VCR

POWER

123

456

789

*

0

FAV

REVEAL

?

TEXT

SIMPLINK

INPUT

MUTE

TIME

HOLD

If your TV will be turned on, you will be able to use its features.

First, connect power cord correctly.

At this moment, the TV switches to standby mode.

■

In standby mode to turn TV on, press the ,

IINNPPUUTT

,

PPRR

DD

//

EE

button on the TV or press the

PPOOWWEERR

,

TTVV

,

IINNPPUUTT

,

PPRR ++//--

,

NNuummbbeerr((00

~

99))

button on the remote control and then the TV will

switch on.

1

VOLUME ADJUSTMENT

Press the

PPRR ++//--

or

NNUUMMBBEERR

buttons to select a programme number.

2

3

1

12

ENGLISH

WATCHING TV / PROGRAMME CONTROL

ON-SCREEN MENU LANGUAGE / COUNTRY SELECTION

Press the

DD

//

EE

//

F

//

G button and then,

OOKK

button to select your

desired language.

Press the

DD

//

EE

//

F

//

G button and then,

OOKK

button to select your

country.

Press the

MMEENNUU

button and then use

DD

//

EE

button to select the Option

menu.

Press the G button and then use

DD

//

EE

button to select Language.

The menus can be shown on the screen in the selected language.

Or, Press the

G button and then use

DD

//

EE

button to select Country.

Press the

G button and then use

DD

//

EE

button to select your desired lan-

guage or country.

Press the

OOKK

button.

Press the

EEXXIITT

button to return to normal TV viewing.

1

2

3

4

5

TThhiiss ffeeaattuurree iiss nnoott aavvaaiillaabbllee iinn aallll ccoouunnttrriieess..

Installation guide menu appears on TV screen when it is turned on for the first time.

1

2

* If you want to change Language/ Country selection

NOTE

!

GG

If you don’t finish set up

IInnssttaallllaattiioonn GGuuiiddee

by pressing

EEXXIITT

button

or time out of OSD (On Screen Display) display, it will continuously

appear until completing set up whenever the set is turned on.

GG

If you select wrong local country, the teletext may not appear correctly

on the screen and some problem may happen during teletext operation.

OK

INPUT MODE

TVTV

DVD

RATIO

EXIT

VOL

UPDATE

INDEX

PR

SLEEP

LIST

Q.VIEW

I/II

MENU

SIZE

VCR

POWER

123

456

789

*

0

FAV

REVEAL

?

TEXT

SIMPLINK

INPUT

MUTE

TIME

HOLD

13

ENGLISH

ON SCREEN MENUS SELECTION AND ADJUSTMENT

Press the

MMEENNUU

button and then

DD

/

EE

button to display each menu.

Press the

GG

button and then

DD

/

EE

button to select a menu item.

Change the setting of an item in the sub or pull-down menu with

F / G button.

You can move to the higher level menu by pressing the

OOKK

or

MMEENNUU

button.

Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual.

The OSD mainly use pictures for the Plasma TV models.

NOTE

!

a. The OSD (On Screen Display) function enables you to adjust the screen status conveniently since it pro-

vides graphical presentation.

b. In this manual, the OSD (On Screen Display) may be different from your TV’s because it is just example

to help the TV operation.

c. In the teletext mode, menus are not displayed

Setup MENU

Picture MENU

Audio MENU

Time MENU

Option MENU

1

2

3

Language

Country

SIMPLINK

Key Lock

ISM Method

Low Power

Option

Clock

Off Time

On Time

Sleep Time

Auto Sleep

Time

Picture Mode

Colour Temperature

XD

Advanced

Aspect Ratio

Picture Reset

Screen

XD Demo

Picture

Auto Tuning

Manual Tuning

Programme Edit

Favourite Programme

Setup

Sound Mode

Auto Volume

Balance 0

TV Speaker

Audio

* PLASMA TV models only

DE F G

OK MENU

DE F G

OK MENU

DE F G

OK MENU

DE F G

OK MENU

DE F G

OK MENU

* This feature is not available in all countries.

14

ENGLISH

WATCHING TV / PROGRAMME CONTROL

AUTO PROGRAMME TUNING

1

Auto Tuning

Manual Tuning

Programme Edit

Favourite Programme

Setup

Auto Tuning

System

Storage From

Search

System G

DE F G

OK MENU

2

Setup

Auto Tuning

Manual Tuning

Programme Edit

Favourite Programme

To Set

Auto Tuning G

DE F G

OK MENU

3 4 5 6

7

8

Auto Tuning

C 05 BG

5 35%

MENU Stop

BG

I

DK

L

OK

EXIT

VOL PR

LIST

Q.VIEW

MENU

*

FAV

Press the

MMEENNUU

button and then

DD

//

EE

button to select the

Setup menu.

Press the

GG

button and then

DD

//

EE

button to select Auto

Tuning.

Press the

GG

button and then

DD

//

EE

button to select System.

Press the

DD

//

EE

button to select a TV system menu;

BG: PAL B/G, SECAM B/G (Europe / East Europe / Asia /

NewZealand / M.East / Africa / Australia)

I : PAL I/II (U.K. / Ireland / Hong Kong / South Africa)

DK: PAL D/K, SECAM D/K (East Europe / China / Africa / CIS)

L : SECAM L/L’ (France)

M : (USA / Korea / Philippines) (option)

Press the

DD

//

EE

button to select Storage From.

Press the

FF

//

GG

button or NUMBER buttons to select the

beginning programme number. If you use NUMBER buttons, any

number under 10 is entered with a numeric ‘0’ in front of it,

i.e.‘

0055

’ for 5.

Press the

DD

//

EE

button to select Search.

Press the

GG

button to begin auto tuning.

All receivable stations are stored. The station name is stored for

stations which broadcast VPS (Video Programme Service), PDC

(Programme Delivery Control) or TELETEXT data. If no station

name can be assigned to a station, the channel number is

assigned and stored as

C (V/UHF 01-69) or S (Cable 01-47),

followed by a number.

To stop auto tuning, press the

MMEENNUU

button.

When auto programming is completed, the Programme edit

menu appears on the screen. See the Programme edit section to

edit the stored programme.

Press the

EEXXIITT

button to return to normal TV viewing.

1

2

3

4

5

6

7

8

9

Up to 100 TV stations can be stored by programme numbers (0 to 99).

Once you have preset the stations, you will be able to use the PR +/- or

NUMBER buttons to scan the stations you have programmed.

Stations can be tuned using automatic or manual modes.

All stations that can be received are stored by this method. It is recom-

mended that you use auto programme during installation of this set.

DE F G

OK MENU

La pagina sta caricando ...

LG 26LC51 Manuale utente

Questo manuale è adatto anche per

LG 26LC51 Manuale utente

in altre lingue

Documenti correlati

Altri documenti