LG NB4530A Guida utente

Marca: LG

Modello: NB4530A

Categoria: Altoparlanti della soundbar

Tipo: Guida utente

OWNER’S MANUAL

310 W Sound Bar System

Please read this manual carefully before operating your set and retain it

for future reference.

NB4530A (NB4530A, S43A1-D)

ENGLISH

繁體中文

NB4530A-NE.BHKGLLK_ENG.indd 1 2013-10-30  12:22:17

1 Getting Started

Getting Started2

Getting Started

Safety Information

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK DO NOT REMOVE COVER (OR BACK) NO

USER-SERVICEABLE PARTS INSIDE REFER SERVICING

TO QUALIFIED SERVICE PERSONNEL.

This lightning ash with

arrowhead symbol within an

equilateral triangle is intended to

alert the user to the presence of

uninsulated dangerous voltage

within the product’s enclosure

that may be of sucient

magnitude to constitute a risk of

electric shock to persons.

The exclamation point within an

equilateral triangle is intended

to alert the user to the presence

of important operating and

maintenance (servicing)

instructions in the literature

accompanying the product.

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK

HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN

OR MOISTURE.

CAUTION: The apparatus shall not be exposed to

water (dripping or splashing) and no objects lled

with liquids, such as vases, shall be placed on the

apparatus.

WARNING: Do not install this equipment in a

conned space such as a book case or similar unit.

CAUTION: Do not block any ventilation openings.

Install in accordance with the manufacturer’s

instructions.

Slots and openings in the cabinet are provided for

ventilation and to ensure reliable operation of the

product and to protect it from over heating. The

openings shall be never be blocked by placing

the product on a bed, sofa, rug or other similar

surface. This product shall not be placed in a built-

in installation such as a bookcase or rack unless

proper ventilation is provided or the manufacturer’s

instruction has been adhered to.

CAUTION concerning the Power Cord

Most appliances recommend they be placed upon

a dedicated circuit;

That is, a single outlet circuit which powers only

that appliance and has no additional outlets or

branch circuits. Check the specication page of this

owner’s manual to be certain. Do not overload wall

outlets. Overloaded wall outlets, loose or damaged

wall outlets, extension cords, frayed power cords, or

damaged or cracked wire insulation are dangerous.

Any of these conditions could result in electric

shock or re. Periodically examine the cord of your

appliance, and if its appearance indicates damage

or deterioration, unplug it, discontinue use of the

appliance, and have the cord replaced with an

exact replacement part by an authorized service

centre. Protect the power cord from physical or

mechanical abuse, such as being twisted, kinked,

pinched, closed in a door, or walked upon. Pay

particular attention to plugs, wall outlets, and

the point where the cord exits the appliance. To

disconnect power from the mains, pull out the

mains cord plug. When installing the product,

ensure that the plug is easily accessible.

NB4530A-NE.BHKGLLK_ENG.indd 2 2013-10-30  12:22:20

Getting Started 3

Getting Started

This device is equipped with a portable battery or

accumulator.

Safety way to remove the battery or the

battery from the equipment: Remove the

old battery or battery pack, follow the steps

in reverse order than the assembly. To prevent

contamination of the environment and bring on

possible threat to human and animal health, the

old battery or the battery put it in the appropriate

container at designated collection points. Do

not dispose of batteries or battery together with

other waste. It is recommended that you use

local, free reimbursement systems batteries and

accumulators. The battery shall not be exposed to

excessive heat such as sunshine, re or the like.

Europe Notice

LG Electronics hereby declares that this/these

product(s) is/are in compliance with the essential

requirements and other relevant provisions of

Directive 1999/5/EC, 2004/108/EC, 2006/95/EC,

2009/125/EC and 2011/65/EU.

Contact oce for compliance of this product :

LG Electronics Inc.

EU Representative, Krijgsman 1,

1186 DM Amstelveen, The Netherlands

Please note that this is NOT a Customer Service

contact point. For Customer Service Information,

see Warranty Card or contact the dealer that you

purchased this product.

Indoor Use Only

RF Radiation Exposure Statement

This equipment should be installed and operated

with minimum distance 20 cm between the

radiator and your body.

IMPORTANT SAFETY NOTICE

The cord grip for the plug tted to this product

is built into the existing power cord as supplied.

If, for any reason you need to shorten the cord.

DO NOT RE-USE THE PLUG

A new plug must be used to ensure your

continued safety by securing the plug to the

power cord in accordance with Plug & Socket

Regulations 1994.

NB4530A-NE.BHKGLLK_ENG.indd 3 2013-10-30  12:22:22

Please click HERE for DoC.

Table of Contents4

Table of Contents

1 Getting Started

2 Safety Information

6 Unique features

6 – Auto power down

6 – Portable In

6 – Speaker ez (easy) setup

6 – LG Sound Sync

6 Introduction

6 – Symbols used in this manual

6 Accessories

7 Remote control

8 Front panel

8 Rear panel

9 Installing the sound bar

9 Installing the cover foot

2 Connecting

10 Mounting the main unit on a wall

12 Connecting the AC adapter

12 Setting up

12 – Pairing wireless subwoofer

13 Connecting to your TV

13 – Using an OPTICAL cable

14 – Connecting with this unit and TV

using an HDMI cable

14 – HDMI cable Checklist

14 – Enjoy rich sound broadcast of the

channel by the sound bar

16 – ARC (Audio Return Channel) function

16 – Additional information for HDMI

17 – What is SIMPLINK?

18 Optional equipment connection

18 – HDMI connection

19 – PORT. (Portable) IN connection

19 – Listening to music from your portable

player

19 – OPTICAL IN connection

19 – Speaker ez (easy) setup

20 – USB playback

20 – Playable file

NB4530A-NE.BHKGLLK_ENG.indd 4 2013-10-30  12:22:22

Table of Contents 5

3 Operating

21 Basic operations

21 – USB operation

21 Other operations

21 – DRC (Dynamic Range Control)

21 – AV Sync

21 – Turn off the sound temporarily

21 – Displaying file and input source

22 – AUTO POWER On/Off

22 – Auto power down

22 – Sleep timer setting

23 – LG Sound Sync

24 Using Bluetooth® technology

25 – Listening to music stored on the

Bluetooth devices

26 Sound adjustment

26 – Setting the surround mode

26 – Auto volume On/Off

26 – Adjust the woofer level settings

27 Controlling a TV with the supplied remote

control

27 – Setting up the remote to control your

4 Troubleshooting

28 Troubleshooting

5 Appendix

29 Trademarks and licenses

30 Specifications

31 Maintenance

31 – Handling the unit

NB4530A-NE.BHKGLLK_ENG.indd 5 2013-10-30  12:22:22

Getting Started6

Getting Started

Unique features

Auto power down

This unit will automatically turn itself o for saving

energy consumption.

Portable In

Listen to music from your portable device. (MP3,

Notebook, etc)

Speaker ez (easy) setup

Listen to sound from TV, DVD or Digital device with

vivid 2.1 or 2.0 ch mode.

LG Sound Sync

Controls volume level of this unit by the remote

control of your LG TV that is compatible with LG

Sound Sync.

Introduction

Symbols used in this manual

Note

Indicates special notes and operating features.

Caution

Indicates cautions for preventing possible damages

from abuse.

Accessories

Please check and identify the supplied accessories.

Remote control (1) Batteries (2)

AC adapter (1) Power cord (1)

Optical cable (1)

USB Cable (1)

Wall bracket (1) Shaft wall mount (2)

Cover foot_19 mm (1)

Wall Mount Bracket

Installation Template

(1)

Cable ties for arranging

cables (2)

NB4530A-NE.BHKGLLK_ENG.indd 6 2013-10-30  12:22:37

Getting Started 7

Getting Started

Remote control

Battery Installation

Remove the battery cover on the rear of the

Remote Control, and insert two (size AAA) battery

with and matched correctly.

• • • • • • • • • •

• • • • • • • • •

(Power) : Switches the unit ON or OFF.

FUNCTION : Selects the function and the input

source.

W/S

FOLDER : Searches for a folder of MP3/

WMA les. When a USB containing MP3/WMA les

in several folders is being played,

press

W/S

FOLDER to select the folder you want

to play.

OPTICAL : Changes input source to OPTICAL

directly.

MUTE

: Mutes the sound.

VOL +/- : Adjusts speaker volume.

• • • • • • • • • •

• • • • • • • • •

AUTO POWER : This function is automatically

turned on the unit. (Refer to the page 22)

AV SYNC : Synchronizes the audio and video.

INFO : Displays the information of a le or an input

source.

REPEAT : Listens to your les repeatedly or

randomly.

C/V

(Skip/Search) :

- Skips Fast backward or Forward.

- Searches for a section within a le.

(Stop) : Stops playback.

d/M

(Play/Pause) : Starts playback. / Pauses

playback.

SOUND EFFECT : Selects a sound eect mode.

AUTO VOLUME : Turns on and o the AUTO

VOLUME mode.

WOOFER LEVEL : Sets the sound level of woofer.

• • • • • • • • • •

• • • • • • • • •

0 to 9 numerical buttons : Selects a le directly.

DRC : Sets DRC(Dynamic range control) function.

SLEEP : Sets the system to turn o automatically at

a specied time.

• • • • • • • • • •

• • • • • • • • •

TV Control buttons : See page 27.

NB4530A-NE.BHKGLLK_ENG.indd 7 2013-10-30  12:22:41

Getting Started8

Getting Started

1/!

(Standby/On)

- / + (Volume -/+)

Adjusts volume level.

(Play/Pause)

(Stop)

F (Function)

Selects the function and input source.

Display window

Precautions in using the touch buttons

Use the touch buttons with clean and dry

hands.

- In a humid environment, wipe out any

moisture on the touch buttons before

using.

Do not press the touch buttons hard to

make it work.

- If you apply too much strength, it can

damage the sensor of the touch buttons.

Touch the button that you want to work in

order to operate the function correctly.

Be careful not to have any conductive

material such as metallic object on the

touch buttons. It can cause malfunctions.

Caution

Front panel

DC. IN 25 V

2 A

USB port

PORT.(Portable) IN

OPT.(Optical) IN

HDMI IN/OUT

Rear panel

NB4530A-NE.BHKGLLK_ENG.indd 8 2013-10-30  12:22:44

Getting Started 9

Getting Started

Installing the sound

bar

You can hear audio thru the sound bar by

connecting the unit to the other device : TV, Blu-ray

disc player, DVD player, etc.

Place the unit in front of the TV and connect it to

the device you want. (Refer to pp. 13 - 20)

Installing the cover

foot

1. Turn the unit upside down.

2. Place the cover foot on the bottom of the unit

to match screw holes with those on the unit.

3. Fix it with screws as shown in the illustration

above.

You can exchange 26 mm foot (factory

installed) with 19 mm to change the height of

your unit.

(It has been already

installed to the unit.)

26 mm

19 mm

Note

NB4530A-NE.BHKGLLK_ENG.indd 9 2013-10-30  12:22:48

2 Connecting

Getting Started10

Getting Started

Mounting the main

unit on a wall

You can mount the main unit on a wall.

Detach the cover foot of the unit, keep the

detached cover foot for later installation and use

the screws to hang the unit on the wall.

Prepare shaft wall mount and bracket.

Unit

Wall bracket

Wall Mount Bracket

Installation Template

Shaft wall mount

1. Locate the shaft wall mount on the screw hole

of the unit's back and then fix it onto the unit

with the screw.

2. Match the TV’s BOTTOM EDGE of Wall Mount

Bracket Installation Template with the bottom

of TV and attach to the position.

3. When you mount it on a wall (concrete), use the

wall plugs. You should drill some holes. A guide

sheet (Wall Mount Bracket Installation Template)

is supplied to drill. Use the sheet to check the

point to drill.

NB4530A-NE.BHKGLLK_ENG.indd 10 2013-10-30  12:22:52

Getting Started 11

Getting Started

4. Remove the Wall Mount Bracket Installation

Template.

5. Fix it with screws as shown in the illustration

below.

6. Hang the main unit onto the bracket as shown

below.

Do not install this unit upside down. It can

damage the parts of this unit or be the

cause of personal injury.

Do not hang onto the installed unit and

avoid any impact to the unit.

Secure the unit rmly to the wall so that it

does not fall o. If the unit falls o, it may

result in an injury or damage to the product.

When the unit is installed on a wall, please

make sure that a child does not pull any of

connecting cables, as it may cause it to fall.

Caution

Detach the unit from the bracket as shown

below.

Note

NB4530A-NE.BHKGLLK_ENG.indd 11 2013-10-30  12:22:57

Connecting12

Connecting

Connecting the AC

adapter

1. Connect the supplied AC power cord to the AC

adapter.

2. Connect the AC adapter cable to DC. IN adapter

input.

3. Plug the AC power cord into an AC outlet.

Only use the AC adapter supplied with this

device. Do not use a power supply from

another device or manufacturer. Using any

other power cable or power supply may cause

damage to the device and void your warranty.

Caution

Setting up

Pairing wireless subwoofer

LED indicator of wireless subwoofer

LED Colour Status

Yellow The wireless subwoofer is

receiving the signal of the unit.

Yellow (blink) The wireless subwoofer is trying

to connect.

Red The Wireless subwoofer is in

standby mode.

O (No

display)

The power cord of wireless

subwoofer is disconnected.

Setting up the wireless subwoofer

for the first time

1. Connect the power cord of the Wireless

subwoofer to the outlet.

2. Turn on the main unit : The main unit and

wireless subwoofer will be automatically

connected.

Manually pairing wireless subwoofer

When your connection is not completed, you can

see the red LED on the woofer and woofer has no

sound output. To solve the problem, follow the

below steps.

1. Press and hold

button on the unit and

MUTE

button on the remote control

simultaneously.

- Displays the “REMATE”.

2. Press PAIRING on back of the woofer.

- The yellow LED will flicker.

3. Turn off and on the unit.

- If you see “Yellow” LED, it’ s successful.

4. If you don’t see “Yellow” LED, try again Step 1 -

Step 3.

NB4530A-NE.BHKGLLK_ENG.indd 12 2013-10-30  12:23:00

Connecting 13

Connecting

If you operate main unit then wireless

subwoofer sound within a few seconds in

standby mode.

Set the distance between this unit and

wireless subwoofer within 10 m (32 ft.).

Optimum performance can be

implemented only when the unit and

the Wireless subwoofer within distance

of 2 m (6 ft.) to 10 m (32 ft.) is used since

communication failure may occur if longer

distance is used.

It takes a few seconds (and may take longer)

for the unit and subwoofer to communicate

with each other.

Note

Connecting to your TV

Please connect with this unit and TV using the

optical digital cable or HDMI cable considering the

state of the TV.

Using an OPTICAL cable

1. Connect the OPT. IN jack on the back of the

unit to OPTICAL OUT jack on the TV using an

OPTICAL cable.

Optical cable

2. Set the INPUT source to OPTICAL. Press

repeatedly FUNCTION on the remote control or

F on the unit until the function is selected.

For selecting directely the OPTICAL function, press

OPTICAL on the remote control.

You can enjoy the TV sound through the

speakers of this unit. But in the case of some

TV models, you must select external speakers

state of the TV on the menu. (For details, refer

to your TV user manual.)

Note

NB4530A-NE.BHKGLLK_ENG.indd 13 2013-10-30  12:23:01

Connecting14

Connecting

Connecting with this unit and

TV using an HDMI cable

If you connect with this unit and TV that supports

HDMI CEC and ARC (Auto Return Channel) , you can

enjoy the TV sound through the speakers of this

unit without connecting optical cable.

HDMI cable

HDMI CEC (Consumer Electronic Control) :

With a single remote control is the ability to

operating.The CEC compatible devices (TV,

Sound Bar, Blu-ray player, etc.)

Note

HDMI cable Checklist

Some HDMI cables do not support the ARC

function, sound output can cause problems.

When connecting this unit and the TV is there no

sound or sound in the event of interruption and

noise, there is a problem with the HDMI cable.

Therefore connect with this unit and TV after check

whether the Type A, High speed HDMI TM Cable

with Ethernet.

STANDARD HDMI CABLE WITH ETHERNET

HIGH SPEED HDMI CABLE

HIGH SPEED HDMI CABLE WITH ETHERNET

(X)

(O)

Enjoy rich sound broadcast of

the channel by the sound bar

Connection through HDMI Cable

Your television that you own should support

the newest HDMI features (1)HDMI CEC / ARC

(Audio Return Channel)) to fully enjoy the Live

broadcasting channel with audio system through

a HDMI cable. Unless your TV support these HDMI

features, this audio system should be connected

through an OPTICAL cable instead of a HDMI cable

to your TV to enjoy the sound of TV channel.

1) HDMI CEC (High-Denition Multimedia Interface

Consumer Electronics Control)

Consumer Electronics Control (CEC) is an HDMI

feature designed to allow the user to command

and control the CEC-enabled devices, that are

connected through HDMI by using only one of

their remote controls.

※

Trade names for CEC are SimpLink G) , Anynet+

(Samsung), BRAVIA Sync (Sony), EasyLink (Philips),

etc.

NB4530A-NE.BHKGLLK_ENG.indd 14 2013-10-30  12:23:04

Connecting 15

Connecting

1. Link the devices through HDMI

Cable

TV : HDMI IN (ARC) port

Audio : HDMI OUT port

2. Activate ARC mode

TV : Setup

Audio or Sound

ARC mode (must be

ON)

All of the graphical user Interface (GUI) and

accessing steps (Step 02

Step 03) to activate

the ARC / HDMI CEC would be dierent

depending on TV manufacture.

Refer to your TV User Manual for in-depth

information.

Note

3. Select the Speaker

TV : Press ‘Input’ button on your TV remote control

HDMI CEC

should be ON

Select your

speaker that you want to enjoy.

※

LG TV : Press ‘Input’ or ‘Simplink’ button on your

TV remote.

Simplink must be ‘ON’ at Simplink

setting

Change the speaker from ‘TV Speaker’ to

‘HT(S) Speaker’ or ‘External Speaker (Optical / HDMI

ARC)’

All of the graphical user Interface (GUI) and

accessing steps (Step 02

Step 03) to activate

the ARC / HDMI CEC would be dierent

depending on TV manufacture.

Refer to your TV User Manual for in-depth

information.

Note

You can also enjoy extra functions such as USB

/ Bluetooth with ‘Function’ button on remote

control of this audio system. When you back to live

TV channel after using the extra functions (USB /

Bluetooth)of this audio system, you should choose

your preferred speaker you want to enjoy the

sound from this audio system again. (Refer to Step

03 Select the Speaker)

NB4530A-NE.BHKGLLK_ENG.indd 15 2013-10-30  12:23:04

Connecting16

Connecting

ARC (Audio Return Channel)

function

The ARC function enables an HDMI capable TV to

send the audio stream to HDMI OUT of the unit.

To use this function :

Your TV must support the HDMI-CEC and ARC

function and the HDMI-CEC and ARC must be

set to On.

The setting method of HDMI-CEC and ARC may

dier depending on the TV. For details about

ARC function, refer to your TV manual.

You must use the HDMI cable (Type A, High

Speed HDMI™ cable with Ethernet).

You must connect the HDMI OUT on the unit

with HDMI IN of the TV that supports ARC

function using an HDMI cable.

You can connect only one Sound bar to TV

compatible with ARC.

Additional information for

HDMI

When you connect a HDMI or DVI compatible

device make sure of the following:

- Try switching off the HDMI/DVI device and this

player. Next, switch on the HDMI/DVI device

and leave it for around 30 seconds, then switch

on this player.

- The connected device’s video input is set

correctly for this unit.

- The connected device is compatible with

720 x 576p, 1280 x 720p, 1920 x 1080i or

1920 x 1080p video input.

Not all HDCP-compatible HDMI or DVI devices

will work with this player.

- The picture will not be displayed properly with

non-HDCP device.

NB4530A-NE.BHKGLLK_ENG.indd 16 2013-10-30  12:23:04

Connecting 17

Connecting

If a connected HDMI device does not accept

the audio output of the player, the HDMI

device’s audio sound may be distorted or

may not output.

Changing the resolution when the

connection has already been established

may result in malfunctions. To solve the

problem, turn o the player and then turn it

on again.

When the HDMI connection with HDCP

is not veried, TV screen is changed to

black screen. In this case, check the HDMI

connection, or disconnect the HDMI cable.

If there are noises or lines on the screen,

please check the HDMI cable (length is

generally limited to 4.5 m(15 ft).

You cannot change the video resolution

in the HDMI IN mode. Change the video

resolution of the connected component.

If the video output signal is abnormal when

your personal computer is connected to

HDMI IN jack, change the resolution of your

personal computer to 576p, 720p, 1080i or

1080p.

Note

What is SIMPLINK?

Some functions of this unit are controlled by the

TV’s remote control when this unit and LG TV’s with

SIMPLINK are connected through HDMI connection.

Controllable functions by LG TV’s remote control :

Power on/o, volume up/down, etc.

Refer to the TV owner’s manual for the details of

SIMPLINK function.

LG TV’s with SIMPLINK function has the logo as

shown above.

Depending on the state of the unit, some

SIMPLINK operation may dier from your

purpose or not work.

Note

NB4530A-NE.BHKGLLK_ENG.indd 17 2013-10-30  12:23:06

Connecting18

Connecting

Optional equipment

connection

HDMI connection

For enjoying sound only

You can enjoy the sound from the external device

you connect.

To the Blu-ray disc player,

DVD player, etc.

1. Connect HDMI cable to HDMI IN jack on the

back of the unit to HDMI OUT jack on the audio

device such as Blu-ray disc player, DVD player,

etc.

2. Set the INPUT source to HDMI IN. Press

repeatedly FUNCTION on the remote control or

F on the unit until the function is selected.

For enjoying both sound and picture

You can enjoy both sound and picture from the

external device you connect.

Blu-ray disc player,

DVD player, etc.

1. Connect HDMI cable to HDMI IN jack on the

back of the unit to HDMI OUT jack on the

external device such as Blu-ray disc player, DVD

player, etc.

2. Connect HDMI OUT jack on the back of the unit

to HDMI IN jack on the TV.

3. Set the INPUT source to HDMI IN. Press

repeatedly FUNCTION on the remote control or

F on the unit until the function is selected.

With the unit connected to external devices

and TV as above illustration,

TV will output picture and sound from

external devices when the unit is turned o

in HDMI IN mode.

Even though PCM multi channel is inputted

to the unit through an HDMI cable, the unit

can only output 2 channel.

Note

NB4530A-NE.BHKGLLK_ENG.indd 18 2013-10-30  12:23:08

Connecting 19

Connecting

PORT. (Portable) IN

connection

MP3 player,

etc...

Listening to music from your

portable player

The unit can be used to play the music from many

types of portable players or external devices.

1. Connect the portable player to the

PORT. (Portable) IN connector of the unit.

2. Turn the power on by pressing

(Power).

3. Select the PORTABLE function by pressing

FUNCTION.

4. Turn on the portable player or external device

and start playing it.

OPTICAL IN connection

Connect an optical output jack of external devices

to the OPT. IN jack.

To the digital

optical output jack

of external device

Speaker ez (easy) setup

Listens to sound from TV, DVD or Digital Device

with 2.1 or 2ch mode.

1. Connect the OPT. IN jack on the back of the unit

to optical out jack of your TV (or digital device

etc.)

2. Select the input source to OPTICAL directly by

pressing OPTICAL.

3. Listen to sound with 2.1 or 2ch speaker.

4. Press OPTICAL to exit from OPTICAL.

Function is retuned to previous one.

NB4530A-NE.BHKGLLK_ENG.indd 19 2013-10-30  12:23:11

3 Operating

Connecting20

Connecting

USB playback

Connect USB memory device to the USB port on

the back of the unit.

With the unit been installed on the wall, you can

connect USB more easily using supplied USB cable.

Removing the USB Device from the unit.

Choose a different function/mode or press

twice in a row.

2. Remove the USB device from the unit.

Playable file

MP3/ WMA file requirement

MP3/ WMA le compatibility with this unit is limited

as follows :

Sampling frequency : within 32 to 48 kHz (MP3),

within 32 to 48 kHz (WMA)

Bit rate : within 32 to 320 kbps (MP3),

40 to 192 kbps (WMA)

Maximum les : Under 999

File extensions : “.mp3”/“.wma”

A protected le by DRM(Digital rights

management) cannot be played on the unit.

Video les in the USB storage device can not be

played.

Compatible USB devices

MP3 Player : Flash type MP3 player.

USB Flash Drive : Devices that support USB1.1.

The USB function of this unit does not support

some USB devices.

USB device requirement

Devices which require additional program

installation connected to a computer, are not

supported.

Do not extract the USB device while in operation.

For a large capacity USB, it may take longer than

a few minutes to be searched.

To prevent data loss, back up all data.

This unit is not supported when the total

number of les is 1,000 or more.

The unit’s USB Port cannot be connected to PC.

The unit can not be used as a storage device.

The exFAT le system is not supported on this

unit.

Depending on some devices, it may not be able

to recognize the followings on this unit.

External HDD

Card readers

Locked devices

Hard type USB devices

USB hub

Using USB extension cable

NB4530A-NE.BHKGLLK_ENG.indd 20 2013-10-30  12:23:13

La pagina sta caricando ...

LG NB4530A Guida utente

Marca: LG

Modello: NB4530A

Categoria: Altoparlanti della soundbar

Tipo: Guida utente

Scarica il pdf

rapporto

in altre lingue

English: LG NB4530A User guide
română: LG NB4530A Manualul utilizatorului

LG NB4530A Guida utente

LG NB4530A Guida utente

in altre lingue

Documenti correlati

Altri documenti