ADS Technologies DVD XPRESS DX2 Hardware And Software Manual

P

Portuguese

DVDXpressDX2

I

Italian

D

Dutch

1

st

Edition

Hardware+SoftwareManual

E

English

G

German

F

French

S

Spanish

Table of Contents

1

Quick Setup Steps 1

Ways to Capture and Edit Video 3

Installation Guide 4

Capture Wizard 10

Creating Video for your Video iPod™,

Sony PSP™ or Creative Zen Vision 20

Direct to Disc 22

German Manual 30

French Manual 59

Spanish Manual 88

Portuguese Manual 117

2

3

4

G

F

5

6

S

P

1

I

Italian Manual 146

Dutch Manual 175

Service & Warranty 204

D

First Edition: February 2006

Microsoft, MS-DOS, Windows, Windows 95, Windows 98SE, Windows 2000, Windows ME and Windows XP are registered trademarks of Microsoft Corporation.

IBM is a registered trademark of the International Business Machines, Inc.

Adobe is a registered trademark of Adobe Inc.

ADS is a registered trademark of ADS Technologies Inc.

ADS Technologies (ADS) makes no warranty of any kind with regard to this material, including but not limited to, the implied warranties of merchantability and fitness for a particular

purpose. The information furnished within this written document is for information purposes only and is subject to change without notice. ADS Technologies assumes no responsibility

or liability for any errors or inaccuracies that may appear herein. ADS makes no commitment to update or to keep current information contained within this document. (rtt)

1

Quick Setup Steps

This is a One Page Quick Setup Guide to help you get up

and running fast

1 Connect the Audio/Video cables from your video source to DVD Xpress DX2 device.

2 Load the DVD Xpress DX2 CD.

3 Connect DVD Xpress DX2 to your PC via the USB Port.

4 Drivers for WinXP and Win2000 are on the root of the CD. Direct Windows to the drivers

on the CD and they will install automatically.

5 Install CapWiz – CapWiz application must be installed as it installs the key elements for

DVD Xpress DX2 to function.

6 Install VideoStudio 9 SE DVD application.

7 Double Click the CapWiz icon on your Desktop.

8 Answer the questions on the 5 Wizard screens.

9 Press Play on your video source so you have video playing.

10 Click Preview on the CapWiz interface and video will appear.

11 Start capturing your video when ready.

Play with CapWiz for a while and then try Ulead VideoStudio 9 SE DVD included with DVD

Xpress DX2.

2

3

DVD Xpress DX2 Overview

DVD Xpress DX2 supports today’s most popular video formats including MPEG4 and

DivX video. All of the video formats are supported by an advanced video encoding chipset

inside the DVD Xpress DX2 which means that DVD Xpress DX2 does all the work instead

of your PC. Not only does this take the work load off your PC, but hardware compression

of the video results in better quality with smaller file sizes. This means that you get more

video on a disc, and with better quality.

Want more control? Ulead® VideoStudio™ 9 SE DVD is easy-to-use software that turns

home videos into fun-to-watch movies! Preserve your precious movies on DVD or CD.

Create video for the Web or mobile devices to share with family and friends. Enhance your

movies with customizable effects, filters and transitions. From Chroma Key effects to Flash

animation overlays, you can easily create fun-to-watch movies.

DVD Xpress DX2 is your best solution for creating video for your Sony® PSP™

(PlayStation® Portable) or Video iPod. CapWiz application makes it easy to capture

video in the right format for your Sony® PSP or Video iPod. Just select the type of video

you want to capture in the Audio/video Format screen and you can start capturing in the

specific video format. Then transfer the video file to your Memory Stick Duo™ for your

Sony® PSP™ or use iTunes to Sync to your Video iPod. It couldn’t be easier than that.

The videos that you capture are also compatible with the Creative Zen Vision Portable

Media Player. Just follow the video resolution standards for the Creative Zen Vision.

DVD Xpress DX2 is a DivX Certified Encoder device; this means that you can capture

video in DivX video format and playback the video in DivX Certified DVD Players. Just

burn the captured video into a CD or DVD and insert the disc in a DVD Players that is

DivX Certified.

Powerful Software Bundle

We want to be sure you receive the greatest benefits from your DVD Xpress DX2

purchase so we have included software to meet your various project goals. Some times

you may just want to archive video to disc in the fastest way possible. Other times you

may want to get a bit creative, but you’ll save most of the video editing for a later time. And

for the big project you want to have a full featured video editor that gives you the freedom

to be creative.

DVD Xpress DX2 includes these software tools for your video projects:

• Capture Wizard application (with Direct To Disc feature)

• Ulead® VideoStudio™ 9 SE DVD

2

3

2

Ways to Capture and Edit Video

Capture Wizard (CapWiz): Easy Video Capture & Playback

This is the fastest and easiest way to capture MPEG-1 (VCD), MPEG-2 (SVCD, DVD),

MPEG-4 and DivX video on your PC. Create video for playback in your Video iPod® or

your Sony PSP device. Use the Capture Wizard screens to verify your video connections,

video compression format and where you want your video files stored on your computer

hard drive.

CapWiz also allows you to set up timed recordings and delayed recordings and easily

select video capture bit rates for Good, Better or Best DVD video quality. You can set

custom settings for video resolution, video and audio bit rate.

Ulead VideoStudio 9 SE DVD: Full Video Capture & Editing

VideoStudio 9 takes you through the movie making process. Main steps are: CAPTURE,

EDIT, EFFECT, OVERLAY, TITLE, AUDIO and SHARE. Use VideoStudio 9 if you want to

edit video, add effects or video filters, titles, background music or voice-overs to create a

unique video production. With VideoStudio 9 you can capture, edit or publish your movie

to disc.

VideoStudio 9 includes a Movie Wizard that lets you easily author and burns your movie

to disc. You can export any single file to the Movie Wizard, or save your edited movies to

a VCD, SVCD or DVD movie and then export it to the Movie Wizard. Movie Wizard can be

selected when you double-click the VideoStudio icon in your Desktop.

4

5

3

Installation Guide

Minimum System Requirements

• Intel® Pentium® III 1GHz or higher or AMD Athlon/Duron CPU

• Microsoft ® Windows® 2000 or XP (Home or Professional)

• 256MB of RAM

• 1.2GB of available hard drive space for program installation

• 4 GB hard drive space for video capture and editing

• Windows® compatible display with at least 1024 x 768 resolution

• Windows® compatible mouse or pointing device

• Windows® compatible sound card

• Available USB 2.0 Port

• CD-ROM drive for software install

• CD-RW or DVD-Recordable drive required for saving movies onto CD or DVD

Recommended System Requirements

• Intel® Pentium® 4 1.5GHz CPU

• 512MB of RAM

• 20 GB free hard drive space

• 7200 rpm IDE Hard Drive

USB 2.0 and USB 1.1 Connections and Drivers

USB 2.0

We strongly recommend using only Windows XP or Windows 2000 with Microsoft USB

2.0 drivers for proper operation of your DVD Xpress DX2 at USB 2.0 connection speeds.

Microsoft Windows USB 2.0 drivers can be obtained from Microsoft directly:

• Windows XP – Included on your new PC, Windows Update, Download Windows XP

Service Pack 1

• Windows 2000 – Download Windows 2000 Service Pack 3

Many USB 2.0 upgrade cards ship with non-Microsoft, third party drivers. These drivers

have many revisions and may have compatibility issues with some USB 2.0 devices. In

many cases the USB 2.0 driver you have may work fine, but we cannot guarantee proper

operation with third party USB 2.0 drivers.

Note: We strongly recommend that you use the USB Ports on the back of your PC, some

front USB ports will not perform correctly because they act as a Hub. Do not use a USB Hub

for the best video capture experience.

4

5

USB 1.1

We recommend using the USB 1.1 port on your motherboard or from a USB 1.1 add-in

card. All USB 1.1 cards use the Microsoft USB drivers. Do not use a USB Hub to connect

the DVD Xpress DX2 to your PC.

Getting Started

Check DVD Xpress DX2 Contents

Hardware:

• DVD Xpress DX2 device

• 6 ft. USB Cable

• 6 ft. A/V Cable (RCA Video and (L+ R) Audio)

• Installation CD

• User’s Manual

• Registration Card

CD Contains:

• Capture Wizard Application

• DVD Xpress DX2 device drivers

• Ulead VideoStudio 9 SE DVD customized for DVD Xpress DX2

• User’s Manual

1

Front

Back

6

7

Wire It Up

In this section you will connect audio and video cables to capture audio and video.

2

Connect your video source (VHS, DVD Player, Laser Disc Player, Camcorders, TV, etc.)

to the DVD Xpress DX2. Connect the 6 ft. A/V In cable to the 3 RCA jacks to your analog

audio/video source RCA Line Out.

Plug It In

In this section you will Connect DVD Xpress DX2 to your PC and Install Software

Drivers. Please read through this section first, then go back and follow these step by step

instructions to connect your DVD Xpress DX2 and install device drivers and software

applications:

Insert DVD Xpress DX2 CD.

3

6

7

Install Device Drivers

Now, plug your USB cable into DVD Xpress DX2 and your PC. Windows will recognize the

device and ask you for the device drivers.

Windows XP or Windows 2000 Let Windows conduct an automatic search for the drivers.

The drivers are located in the root directory of your DVD Xpress DX2 CD, usually your “D”

drive. Windows will install the drivers.

4

Install Software Applications

Now that you have installed the device, click the Capture Wizard button to install the

Capture Wizard capture and playback application.

• If you do not have Microsoft’s DirectX 9.0c installed, it will install automatically. DirectX

9.0c is required for proper operation of your DVD Xpress DX2. Installation of DirectX 9.0c

may require a re-start of your computer.

• If your computer restarted, click “My Computer” on your desktop. Double click the CD

Drive icon to bring back the DVD Xpress DX2 Installation screen.

• Continue installing the key bundled software on to your system:

Ulead VideoStudio 9 SE DVD.

5

Verify Hardware Installation

Check Device Manager to verify that the ADS

DVD Xpress DX2 hardware is recognized by

Windows and is properly installed.

6

8

9

Windows XP or Windows 2000:

1 Click Start, Settings, Control Panel.

2 In Control Panel, click System.

3 Click on the Hardware Tab.

4 Click Device Manager Button.

5 Double click the Sound, Video and Game Controllers Device.

6 ADS DVD Xpress DX2 should be listed.

If ADS DVD Xpress DX2 is listed under the Sound, Video and Game Controllers

heading, then the device was properly installed.

Optimize your System for Best Performance

7

Set your VGA Resolution

1024 X 768 is the optimal resolution for viewing video at full resolution. DVD video is

captured at 720 x 480 (720 x 576) PAL. If your resolution is not high enough you will not

be able to view the video at full resolution.

1 Right click on your desktop

2 Click Properties

3 Click on Settings Tab

4 Adjust screen area to 1024 X 768 & 16 Bit Color (or higher if your VGA card and monitor

support higher resolutions and color depth).

8

9

Defragment your Hard Drive for best performance

Disk Defragmentation consolidates files and folders on your Hard Disk and allows for

better system access of files and folders. It will also help when you are capturing and

writing new files into your Hard Disk. Please keep in mind that this process requires some

amount of time which depends on several factors, including the size of the Hard Disk,

number and size of files and how fragmented your local disk is. Before you Defragment

your Hard Disk, you can Analyze a volume to see if this step is required.

1 Double-click My Computer

2 Right Click and Select Properties on the Hard Disk you want to Save your captured Videos

3 Click on Tools tab

4 Click Defragment Now button

5 Click Analyze button to see if you need to Defragment the Hard Disk

Installation Summary

By now you should have completed the following:

1 Made all of the Audio and Video connections between DVD Xpress DX2 and your

Audio/Video source.

2 Connected DVD Xpress DX2 to the USB Port on your PC.

3 Installed the drivers and verified that the device is properly installed

4 Installed all necessary software applications required for proper operation.

5 Optimized your System for best performance.

6 Now you are ready to Start Capturing Videos to your PC.

8

Start Capturing Videos

9

Don’t forget to Turn On and press “PLAY” on your video source (VCR, Camcorder, etc.)

so you can capture the video contents.

Now you are ready to start capturing video. We have created the Capture Wizard

(CapWiz) application to allow you to quickly capture video on your PC without learning

how to edit video or author a DVD. Use the Capture Wizard application to test video

capture and playback of video before moving on to VideoStudio 9 SE DVD.

We have created a simple getting started Wizard that allows you to verify your connections

and make the proper setup choices before capturing video.

10

11

4

Capture Wizard

DVD Xpress DX2 Capture Wizard

Click “Next” to advance to the next step.

1 Open CapWiz

Click the CapWiz icon on your Desktop or Click “Start” > “All Programs” > “ADSTech

DVD Xpress DX2” and click on “Capwiz”

Choose worldwide video standard based on country – For Users in North America, you

will select NTSC. For Users in Europe and many other countries you will select PAL.

For more information on these standards, click on “Learn More about Worldwide Video

Standards…”

2 Select Video Inputs

Choose RCA or S-Video based on your video source.

10

11

3 Create file name and select file location

We will automatically select “My Documents\My Videos\” as the location to store your

video files, we also set the file name to “Movies. You can select a different location or file

name if you desire.

4 Choose video format

In this step you will select between MPEG-1 and MPEG-2 video compression formats.

Select MPEG-2 if you wish to capture video in the highest quality DVD format. Select

MPEG-1 if you want to capture video in the VCD format. You can capture in MPEG-4

or DivX format in the Audio / Video Format screen when the Wizard completes all the

steps.

The Disk Space indicator shows the amount of disk space you have available and an

example of how much video you can capture if you selected MPEG-2 at 3 Mb/sec.

For more information on these MPEG, click on “Learn More about Video Formats…”

12

13

5 Ready

Now you are ready to start viewing and capturing video. You will need to start your

Camcorder or VCR playing. Press Play on your video source (VCR, DVD player, etc.).

Click Finish and the Wizard screen will disappear and you will see the full Capture

Wizard interface.

Using Capture Wizard Video Capture/Playback tool for the

first time

You have just completed the Wizard screens to ensure that you have connected your

video cables, selected your video format and now you are ready to capture video.

The Capture Wizard Interface

12

13

Preview and Record Video

1 Be sure your video device is playing a video

2 Click “Preview” and you will see video playing in the preview window. You will notice the

status indicator displaying “Preview”.

3 Click the “Stop” ( ■ ) button or press the “Esc” key on your keyboard to stop video preview.

4 If you Click the Red “Record” ( ● ) button while previewing video, the video will stop

momentarily, then start again. When the video preview starts again, you are recording.

You will notice the status indicator displaying “Recording” and the Time count start.

5 To Stop recording, press the “Stop” ( ■ ) button or press the “Esc” key on your keyboard.

6 You will notice that the file name has been added to the playback list box.

Ways to Begin Recording

1 You can start recording from the Stop or idle status in CapWiz or while you are

previewing video.

2 Click the red Record ( ● ) button to begin recording at any time.

3 To Stop recording, Click the “Stop” ( ■ ) button or the “Esc” key on your keyboard.

4 The video will be displayed in the resolution you selected for the video capture.

Playback

Captured video files can be displayed on your computer monitor. Use this option to

Playback the files you captured. Video will be played back at the resolution it was

captured in.

1 Click on the file name in the Playback List Box, then click on the “Play” ( ► ) button. You

may also double click on the file name for Instant Playback. You will notice that the

status indicator turns Green and the display changes to Play.

2 To Stop Playback, Click the Stop ( ■ ) button or press the “Esc” key on your keyboard.

Seek through the video

If you have recorded a long video, you may want to jump ahead to a specific point in the

video file and continue playback from that point. This feature is possible for MPEG-2

files only.

1 Double-click on the file you want to Playback in your computer.

2 As the video is playing in the screen, use your mouse to drag the playback position

slider to the point you desire.

3 Once you release the mouse, the file will resume playback.

Keyboard Short Cuts:

Preview = Enter key

Record = “R” key

Instant Playback = double click file name

Play/Pause = space bar

Stop Record = Esc key

Stop Preview = Esc key

Advance 1 second (in Pause mode) = right arrow key

Rewind 1 second (in Pause mode) = left arrow key

14

15

Capture Wizard Features and Functions

Recording File Name

Before Recording check the Recording Filename box in the upper left hand corner of the

application. The file name you selected in the Wizard Screen is listed here.

1 Keep this file name if you wish or run the Wizard to use a new file name.

2 Check the “Auto Naming” box and CapWiz will automatically name each captured file

in sequential order; i.e. if your video file is “Movie”, the first file captured will be named

“Movie-0000”, the second “Movie-0001” and so on.

3 Every time you stop a capture, the new file name will be displayed in Playback List box.

4 You can also uncheck “auto-naming” and click the “Unique” button and CapWiz will use

the file name you enter in the filename box. You need to provide a new file name for

each video clip captured. If you do multiple captures without changing the unique file

name, the file will be written over each time you capture.

Playback List Box

The Playback list box shows the file names of your video captures. This list will match the

directory location you selected in the Capture Wizard screens. If you are unsure of the

location you selected, run the Wizard again.

Browse

The Browse button will allow you to browse to other file directories or hard drives. If you

select another directory, any MPEG video files located there will appear in the Playback

list box.

Details

The Details button will allow you examine the details of the files in the Playback List box.

Click on the Details Button and a dialog box will open showing detailed information about

each file such as: Date, File Size, File Name and location on your system.

Click on any file in this dialog box and then click Details again and you will see more

details about this individual files such as:

1 Video bit rate

2 Audio sampling rate

3 Audio bit rate

4 Frame rate

Deleting a File

From the detailed information box you can delete a file by clicking the “Remove” button.

CapWiz will ask you if you are sure, click OK and the file is deleted from your system.

14

15

Application Links

The icons at the side of the CapWiz screen allow you to easily jump from CapWiz to the

bundled application that came with your DVD Xpress DX2. You can quickly jump to Ulead

VideoStudio 9 SE DVD application. When you click on the application button, CapWiz will

automatically close.

CapWiz also allows you to capture MPEG1 or MPEG2 video straight to Disc, just click the

Direct to Disc button to start the application, you will need to have the correct media disc

for the type of project you want in your DVD burner.

Menu Options

This section will describe all settings and choices for all of the menu options along the top

of the CapWiz Interface.

Inputs

This dialog box allows you to quickly change your video input choices. Here you can

choose between RCA and S-Video Input. These settings can also be changed by running

the Capture Wizard Screens.

Audio/Video Format

Country Setting The Audio/Video Format dialog screen allows you to select your video

standard based on your location. Based on the country select, the system will set to NTSC

of PAL video format. If you are not sure of the correct selection, run the Capture Wizard

and read the document called “Learn More about Worldwide Video Standards”.

Video Quality

Select the Video Format of your choice. You can choose:

• DVD (MPEG-2)

• Super Video CD (SVCD)

• Video CD (VCD)

• iPod™ (MPEG-4)

• Sony PSP™ (MPEG-4)

• DivX (MPEG-4)

Custom User Defined Video Settings

CapWiz lets you set custom capture settings. The custom settings give you lots of

flexibility in creating capture settings to meet your individual needs. To access the Custom

Settings dialog box, click on the “Custom Settings…” button.

Regional Settings

Select the country you are located to set the proper Video Standard.

16

17

NTSC

325 x 240 (VCD)

352 x 480 (1/2 D1)

480 x 480 (SVCD)

640 x 480 (DVD)

720 x 480 (DVD)

Video Encoding Format

• MPEG-1 (VCD only)

• MPEG-2 (DVD or SVCD)

• DivX (MPEG-4)

Audio Encoding Format

• MPEG-1 Layer-2

• WAV (LPCM)

Compression Tuning

This section allows you to customize the Video Encoding Format you have selected. You

will be able to set the Video Resolution, Video Quality, Audio Frequency or Audio Bit Rate.

Video Resolution

You can select from the following video capture resolutions for MPEG-2 Video

Encoding Format:

PAL

352 x 288 (VCD)

352 x 576 (1/2 D1)

480 x 576 (SVCD)

720 x 576 (DVD)

You can select from the following video capture resolutions for MPEG-4 Video

Encoding Format:

NTSC

176 x 144 (Handheld)

352 x 240 (Portable)

640 x 480 (Home Theater 2)

720 x 480 (Home Theater 1)

PAL

176 x 144 (Handheld)

352 x 288 (Portable)

720 x 576 (Home Theater)

There are no quality settings for VCD as this format has standard video and audio

bit rates.

MPEG-1 When MPEG-1 is selected the only Video Resolution allowed is 352 x 240

(NTSC) or 352 x 288 (PAL).

La pagina sta caricando ...

ADS Technologies DVD XPRESS DX2 Hardware And Software Manual

Questo manuale è adatto anche per

ADS Technologies DVD XPRESS DX2 Hardware And Software Manual

in altre lingue

Documenti correlati

Altri documenti