Scanstrut LMB-F1 Manuale utente
- Categoria
- Titolari
- Tipo
- Manuale utente
A
B
LMB-F1 / LMB-F2
Scanstrut Backstay Self-Levelling Mount Installation Instructions
57
2
19
10
1.6 x 25mm
split pin
x1
M8 x 36mm
x1 M8 Castle nut
x1
M8 x 12mm
x1
M8 S/S washer
x2
M6 x 16mm
x4
M6 x 50mm x2
Threadlock
x1
=
M6 x 10mm
x2
M6 x 16mm
x8
8
M6 Nylon
washer x4
M6 Nylon
shoulder x2
M6 x 10mm
x2
M8 x 55mm x 1
M6 x 12mm
x4
Nylon Spacer
x1
M8 S/S washer
x2
M8 Nyloc nut
x1
M8 x (?)mm
x2
3, 4 & 5mm
Tools Required
M6 x 20mm
x4
60065
6mm S/S Washer
x4
60060 - M6 S/S Nyloc Nut
x4
60066
M6 Spring Washer S/S
x4
8mm Flat Head
13mm x 2
10mm x 1
(Not
Supplied)
M8 Thumbscrew
x1
Posidriv No. 3
Screwdriver
Issue 7
Optional Extension
M6 x 10mm
x4
LMB-EXTSHORT 0.65M
LMB-EXTLONG 1.3M
0.65M or
1.3M
1A 2A
1B 2B
3A
3B
4 5A
5B
7A
7B
6A
6B
M8
x2
!
70mm
!
70mm
(= 3A + 6A)
(= 3B + 6B)
x2
x2
x6
x6
x4
x4
8B
8A
x8 x8
10
9Oset mounting holes
for Raymarine domes
x2
8˚
+
_
11A
11B
IMPORTANT NOTES
LMB-F1/A1 and LMB-F2/A2 are intended to mount a single radome as stated in the latest Scanstrut
Product Guide – subject to change without prior notice. A GPS antenna can be installed using part
LM-GPS.
Use of the LMB-F1/A1 and LMB-F2/A2 with unapproved products, or overloading, invalidates any
warranty.
No liability is accepted for damage caused by incorrect installation.
Product has been designed specically for the mounting of approved radar (listed in the latest
Scanstrut Pod Product Guide.) under normal boating conditions.
Product is not designed to withstand overload, impact, excessive force or entanglement in sails and
rigging.
The installation and assembly must be regularly inspected for evidence of damage or loose parts.
This product is designed to t backstay cables from Ø7 [0.27” to Ø14mm].
IMPORTANT NOTES
LMB-F1/A1 and LMB-F2/A2 are intended to mount a single radome as stated in the latest Scanstrut
Product Guide – subject to change without prior notice. A GPS antenna can be installed using part
LM-GPS.
Use of the LMB-F1/A1 and LMB-F2/A2 with unapproved products, or overloading, invalidates any
warranty.
No liability is accepted for damage caused by incorrect installation.
Product has been designed specically for the mounting of approved radar (listed in the latest
Scanstrut Pod Product Guide.) under normal boating conditions.
Product is not designed to withstand overload, impact, excessive force or entanglement in sails and
rigging.
The installation and assembly must be regularly inspected for evidence of damage or loose parts.
This product is designed to t backstay cables from Ø7 [0.27” to Ø14mm].
IMPORTANT NOTES
LMB-F1/A1 and LMB-F2/A2 are intended to mount a single radome as stated in the latest Scanstrut
Product Guide – subject to change without prior notice. A GPS antenna can be installed using part
LM-GPS.
Use of the LMB-F1/A1 and LMB-F2/A2 with unapproved products, or overloading, invalidates any
warranty.
No liability is accepted for damage caused by incorrect installation.
Product has been designed specically for the mounting of approved radar (listed in the latest
Scanstrut Pod Product Guide.) under normal boating conditions.
Product is not designed to withstand overload, impact, excessive force or entanglement in sails and
rigging.
The installation and assembly must be regularly inspected for evidence of damage or loose parts.
This product is designed to t backstay cables from Ø7 [0.27” to Ø14mm].
IMPORTANT NOTES
LMB-F1/A1 and LMB-F2/A2 are intended to mount a single radome as stated in the latest Scanstrut
Product Guide – subject to change without prior notice. A GPS antenna can be installed using part
LM-GPS.
Use of the LMB-F1/A1 and LMB-F2/A2 with unapproved products, or overloading, invalidates any
warranty.
No liability is accepted for damage caused by incorrect installation.
Product has been designed specically for the mounting of approved radar (listed in the latest
Scanstrut Pod Product Guide.) under normal boating conditions.
Product is not designed to withstand overload, impact, excessive force or entanglement in sails and
rigging.
The installation and assembly must be regularly inspected for evidence of damage or loose parts.
This product is designed to t backstay cables from Ø7 [0.27” to Ø14mm].
IMPORTANT NOTES
LMB-F1/A1 and LMB-F2/A2 are intended to mount a single radome as stated in the latest Scanstrut
Product Guide – subject to change without prior notice. A GPS antenna can be installed using part
LM-GPS.
Use of the LMB-F1/A1 and LMB-F2/A2 with unapproved products, or overloading, invalidates any
warranty.
No liability is accepted for damage caused by incorrect installation.
Product has been designed specically for the mounting of approved radar (listed in the latest
Scanstrut Pod Product Guide.) under normal boating conditions.
Product is not designed to withstand overload, impact, excessive force or entanglement in sails and
rigging.
The installation and assembly must be regularly inspected for evidence of damage or loose parts.
This product is designed to t backstay cables from Ø7 [0.27” to Ø14mm].
E-mail: [email protected] E-mail: [email protected]
GPS
IMPORTANTE
LMB-F1/A1 e LMB-F2/A2 sono previsti per montare un solo radome come indicato nella più recente
Guida ai Prodotti Scanstrut – fatte salve eventuali modiche senza preavviso. Si può installare
un’antenna GPS usando il pezzo LM-GPS.
L’uso di LMB-F1/A1 e LMB-F2/A2 con prodotti non approvati, o un loro sovraccarico, invalida qualsiasi
garanzia.
Si declina qualsiasi responsabilità per danni causati da un’installazione erronea.
Questo prodotto è stato studiato appositamente per il supporto di apparecchiature radar approvate
(elencate nella Guida ai Prodotti Scanstrut) e utilizzate in normali condizioni di navigazione.
Questo prodotto non è progettato per resistere a sovraccarichi, urti, forze eccessive o
l’ingarbugliamento in vele e sartiame.
L’installazione e il montaggio devono essere ispezionati con regolarità per vericare la presenza di
danni o di pezzi allentati.
Questo prodotto è stato studiato per essere montato su paterazzi di diametro compreso fra 7 e 14
mm.
Per installazioni diverse da quelle qui indicate, si prega di consultare la direzione centrale di
Scanstrut.
12
x2
-
1
-
2
-
3
-
4
Scanstrut LMB-F1 Manuale utente
- Categoria
- Titolari
- Tipo
- Manuale utente
in altre lingue
- English: Scanstrut LMB-F1 User manual
