Scanstrut SPR-1i-RM Manuale utente

Tipo
Manuale utente
IMPORTANT
Pods are only compatible with marine electronics devices as stated in the latest Scanstrut Product guide – subject to change without
prior notice.
Use with unapproved products, or overloading, invalidates any warranty.
No liability is accepted for damage caused by incorrect installation.
The installation and assembly must be regularly inspected for evidence of damage or loose parts.
Product has been designed specically for the mounting of approved marine electronics devices and used under normal boating
conditions.
For installations that dier from those stated here, please consult Scanstrut head oce.
IMPORTANT
Boîtiers de Pont sont uniquement compatibles avec les appareils d’électronique marine repris dans le dernier Guide Produits
Scanstrut – sujet à Modication sans préavis.
L’usage des avec des produits non validés, ou la surcharge, annulent toute garantie.
Scanstrut déclinent toute responsabilité pour les dégats résultant d’une installation incorrecte.
Linstallation et l’assemblage doivent être inspectés régulièrement an de déceler des dégats ou des pièce désserrées.
Ce produit a été spéciquement conçu pour le montage d’appareils d’électronique marine approuvés dans des conditions de
navigation normales.
Pour les installations diérentes de celles reprises ici, veuillez contacter le siège social de Scanstrut.
WICHTIG
Instrumentenhalterungen sind nur mit Navigationsgeräten kompatibel, wie sie in der aktuellen Scanstrut Produktübersicht aufge-
listet sind. Änderungen können ohne vorherige Ankündigung vorgenommen werden.
Durch die Verwendung mit nicht genehmigten Produkten bzw. durch Überlastung wird jegliche Garantie ungültig.
Für Schäden aufgrund unsachgemäßen Einbaus wird keine Haftung übernommen.
Die Installation und die Baueinheit müssen regelmäßig auf Anzeichen von Schäden oder lockere Teile geprüft werden.
Dieses Produkt wurde speziell für die Montage genehmigter Navigationsgeräte unter normalen Einsatzbedingungen auf dem Schi
entwickelt.
Für andere Installationen als die hier genannten wenden Sie sich bitte an Scanstrut.
IMPORTANTE
Deck Pods son compatibles únicamente con equipos electrónicos marinos según se establece en la última Guía de Productos
Scanstrut– sujeto a cambios sin previo aviso.
El uso con productos no aprobados, o bajo exceso de carga, invalidará cualquier garantía.
No se aceptará ninguna responsabilidad por los daños causados por una instalación incorrecta.
La instalación y ensamblaje deberá inspeccionarse regularmente, comprobando cualquier evidencia de daños o piezas aojadas.
Este producto ha sido especícamente diseñado para el montaje de equipos electrónicos marinos aprobados bajo condiciones
normales de navegación.
Para instalaciones distintas a las establecidas aquí, consulte siempre a su distribuidor Scanstrut.
Scanstrut Scanpod Installation Instructions
SPR-1i-RM
1 Instrument Rail Mount Pod
IMPORTANTE
I Pods sono compatibili solo con apparecchiature elettroniche navali come indicato nella più recente Guida ai Prodotti Scanstrut –
fatte salve eventuali modiche senza preavviso.
L’utilizzo con prodotti non approvati, o un sovraccarico, invalida qualsiasi garanzia.
Si declina qualsiasi responsabilità per danni causati da un’installazione erronea.
Linstallazione ed il montaggio devono essere ispezionati con regolarità per vericare la presenza di danni o di pezzi allentati.
Questo prodotto è stato studiato appositamente per il supporto di apparecchiature elettroniche navali approvate e utilizzate in
normali condizioni di navigazione.
Per installazioni diverse da quelle qui indicate, si prega di consultare la direzione centrale di Scanstrut.
x1
x1
Parts List
Front with seal tted
60087
14-06-22 Issue E
3
x4 x2
4
5
2
7
x2
x1
x1
x1 x1
x4
x1
60535
60536
190SPR-1
620526
Back
190SPH-5
1For ø25mm (1“) tube: ø20mm (25/32”) hole saw
For ø32mm (1 1/4”) tube: ø25mm (1”) hole saw
Fully Tighten to lock 60535
& 60536 together
60535
4 x 60087
4 x 620526
1 x 190SPH-5
190SPR-1
x1
178113
108111
R MIN 82mm
(3.23”)
60414
60416
2 x 60416
2 x 60414
1 x 178113
178111
Tools Required
Hole Saw ø20 or
25mm (25/23" or 1”)
Power drill
2.5mm Allen
Key
Posidriv No. 3
Screwdriver
Drill Bit to suit
instrument xings
4mm Allen
Key
  • Page 1 1
  • Page 2 2

Scanstrut SPR-1i-RM Manuale utente

Tipo
Manuale utente