Olimpia Splendid AQUARIA S1 Manuale utente

Marca: Olimpia Splendid

Modello: AQUARIA S1

Tipo: Manuale utente

INSTRUCTIONS FOR INSTALLATION, USE AND MAINTENANCE

ISTRUZIONI PER INSTALLAZIONE, USO E MANUTENZIONE

Caution: risk of re

Attenzione: rischio di incendio

AQUARIA S1

20-24 P

AVVERTENZE

1. L’apparecchiocontienegasR290(classicazioneinammabilitàA3).

2. L’apparecchio deve essere immagazzinato in un locale ben ventilato in cui la dimensione della stanza

corrisponde alle misure specicate per l’utilizzo dell’apparecchio. L’apparecchio deve essere installato,

utilizzatoeconservatoinunlocalelacuisupercierispettiledimensioniminimeindicatenellatabelladi

pagina 9.

 QuestoapparecchiocontieneunaquantitàdigasrefrigeranteR290pariaquellaindicatanell’etichettadati

posta sull’apparecchio.

3. L’apparecchiopuòessereutilizzatodabambinidietànoninferiorea8anniedapersoneconridottecapacità

siche,sensorialiomentali,oprivediesperienzaodellanecessariaconoscenza,purchésottosorveglianza

oppuredopochelestesseabbianoricevutoistruzionirelativeall’usosicurodell’apparecchioeallacomprensione

deipericoliadessoinerenti.Ibambininondevonogiocareconl’apparecchio.Lapuliziaelamanutenzione

destinataadessereeettuatadall’utilizzatorenondeveessereeettuatadabambinisenzasorveglianza

(applicabileperipaesidell’UnioneEuropea).

4. L’apparecchiopuòessereutilizzatodapersone(inclusiibambini)conridottecapacitàsiche,sensorialio

mentali,oprivediesperienzaodellanecessariaconoscenza,purchésottosorveglianzaoppuredopochele

stesseabbianoricevutoistruzionirelativeall’usosicurodell’apparecchiodaunapersonaresponsabileper

lalorosicurezza(applicabilesoloperipaesifuoridall’UnioneEuropea).

5. Seilcavodialimentazioneèdanneggiato,essodeveesseresostituitodalcostruttoreodalsuoservizio

assistenzatecnicaocomunquedaunapersonaconqualicasimilare,inmododaprevenireognirischio.

6. Perprevenireognirischiodifolgorazioneèindispensabilescollegarelaspinadallapresadicorrenteprima

dieettuareognioperazionedimanutenzionesull’apparecchio.

7. Perilcorrettofunzionamentodell’apparecchio,rispettareledistanzeminimeeleindicazioniriportatenel

presentemanuale(vederegura1)

8. Perilcorrettocollegamentoelettricodell’apparecchio,seguireleindicazioniriportatenelparagrafo2.4.

WARNINGS

1. TheappliancecontainsR290gas(A3ammabilityclassication)

2. Theapplianceshallbestoredinawell-ventilatedareawheretheroomsizecorrespondstotheroomareaas

speciedforoperation.Theappliancemustbeinstalled,usedandstoredinaroomwithaoorsurfacein

compliancewiththeminimumsizesindicatedinthechartatpage9.Thisappliancecontainsaquantityof

refrigerantgasR290equaltotheoneindicatedinthedatalabellocatedontheappliance.

3. Thisappliancecanbeusedbychildrenagedfrom8yearsandaboveandpersonwithreducedphysical,sensory

ormentalcapabilitiesorlackofexperienceandknowledgeiftheyhavebeengivensupervisionorinstruction

concerninguseoftheapplianceinasafewayandunderstandthehazardsinvolved.Childrenshallnotplay

withtheappliance.Cleaningandusermaintenanceshallnotbemadebychildrenwithoutsupervision.(be

applicablefortheEuropeanCountries).

4. Thisapplianceisnotintendedforusebypersons(includingchildern)withreducedphysical,sensoryormental

capabilitiesorlackofexperienceandknowledge,unlesstheyhavebeengivensupervisionorinstruction

concerninguseoftheappliancebyapersonresponsiblefortheirsafety.(Applicableforothercountries

excepttheEuropeanCountries).

5. Ifthesupplycordisdamaged,itmustbereplacedbythemanufacturer,itsserviceagentorsimilarlyqualied

persons in order to avoid a hazard.

6. Topreventanyelectrocutionrisk,itisessentialtodisconnecttheplugfromthepowersocketbeforeperforming

anymaintenanceoperationontheappliance.

7. Forthecorrectoperationoftheappliance,observetheminimumdistancesandtheindicationswritteninthis

manual(seegure1).

8. Forthecorrectelectricalconnectionoftheappliance,followtheindicationsinparagraph2.4.

min

30cm

min

20cm

min

20cm

AQUARIA S1

10-12-14-16

INSTRUCTIONS POUR L’INSTALLATION, L’EMPLOI ET L’ENTRETIEN

INSTRUCTIONS FOR INSTALLATION, USE AND MAINTENANCE

ISTRUZIONI PER INSTALLAZIONE, USO E MANUTENZIONE

INSTRUCCIONES PARA LA INSTALACIÓN, USO Y MANTENIMIENTO

HANDBUCH FÜR INSTALLATION, GEBRAUCH UND WARTUNG

Attenzione: rischio di incendio

Caution:

Attention : risque d'incendie

Achtung: Brandrisiko

Atención: riesgo de incendio

10b

10a

min.

70cm

min. 2m

10a 10b

10b

10a

AQUARIA

ENGLISH

EN - 1

MAIN INDEX

0 - WARNINGS ........................................................................................................................................2

0.1 - GENERAL INFORMATION .............................................................................................................2

0.2 - SYMBOLS .......................................................................................................................................2

0.2.1 - Editorial pictograms ......................................................................................................................... 2

0.3 - GENERAL WARNINGS ...................................................................................................................3

0.4 - PROPER USE ................................................................................................................................. 7

0.5 - UNINTENDED AND POTENTIALLY DANGEROUS USE ...............................................................7

0.6 - WARNINGS FOR R290 REFRIGERANT GAS ...............................................................................8

1 - DESCRIPTION OF THE APPLIANCE .............................................................................................15

1.1 - FEATURES ...................................................................................................................................15

1.2 - IDENTIFICATION OF THE MAIN COMPONENTS .......................................................................15

2 - INSTALLATION ...............................................................................................................................15

2.1 - APPLIANCE TRANSPORT ...........................................................................................................15

2.2 - WARNINGS ...................................................................................................................................16

2.3 - INSTALLATION OF THE APPLIANCE ..........................................................................................16

2.4 - ELECTRICAL CONNECTION .......................................................................................................16

3 - USE OF THE APPLIANCE ..............................................................................................................17

3.1 - CONTROL PANEL SYMBOLS AND KEYS ...................................................................................17

3.2 - OPERATION OF THE APPLIANCE ..............................................................................................17

3.2.a - Preliminary operations...................................................................................................................17

3.2.b - ON/OFF key ..................................................................................................................................18

3.2.c - Fan speed .....................................................................................................................................18

3.2.d - Timer function ................................................................................................................................18

3.2.e - Activation of the display.................................................................................................................18

3.2.f - Humidity level setting ....................................................................................................................18

3.2.g - Child Lock function (Children safety).............................................................................................19

3.2.h - Wi function ................................................................................................................................... 19

3.2.i - Oscillation function ........................................................................................................................19

3.3 - MODE SELECTION ......................................................................................................................19

3.3.a - Laundry mode ...............................................................................................................................19

3.3.b - Dehumidication mode .................................................................................................................. 19

3.4 - WATER UNLOADING ...................................................................................................................19

3.4.a - Emptying the tank..........................................................................................................................19

3.4.b - Continuous water unloading .......................................................................................................... 20

3.5 - BLACKOUT ...................................................................................................................................20

4 - MAINTENANCE AND CLEANING ..................................................................................................20

4.1 - CLEANING ...................................................................................................................................20

4.1.a - Cleaning the appliance .................................................................................................................. 20

4.2 - FILTER CLEANING .....................................................................................................................21

4.3 - TANK CLEANING ........................................................................................................................21

5 - PRESERVATION OF THE APPLIANCE .......................................................................................... 21

6 - TECHNICAL DATA ..........................................................................................................................22

7 - TROUBLE SHOOTING ....................................................................................................................22

DISPOSAL

This symbol on the product or its packaging indicates that the appliance cannot be treated as normal domestic

trash, but must be handed in at a collection point for recycling electric and electronic appliances.

Your contribution to the correct disposal of this product protects the environment and the health of your fellow

men. Health and the environment are endangered by incorrect disposal.

Further information about the recycling of this product can be obtained from your local town hall, your refuse

collection service, or in the store at which you bought the product.

This regulation is valid only in EU member states.

ENGLISH

EN - 2

Index

MAIN INDEX

The main index of this manual

is given on page “EN-1”

ILLUSTRATIONS

The illustrations are grouped on the initial pages of the manual

0 - WARNINGS

0.1 - GENERAL INFORMATION

First of all, we would like to thank you for choosing our appliance.

0.2 - SYMBOLS

The pictograms in the next chapter provide the necessary information for correct, safe

use of the machine in a rapid, unmistakable way.

0.2.1 - Editorial pictograms

Service

Refers to situations in which you should inform the SERVICE department in the company:

CUSTOMER TECHNICAL SERVICE.

Index

Paragraphs marked with this symbol contain very important information and

recommendations, particularly as regards safety.

Failure to comply with them may result in:

- danger of injury to the operators

- loss of the warranty

- refusal of liability by the manufacturer.

Raised hand

Refers to actions that absolutely must not be performed.

HAZARD

Indicates that the appliance uses inammable refrigerant. If the refrigerant escapes

and is exposed to a source of external ignition, there is a re risk.

AQUARIA

ENGLISH

EN - 3

DANGER OF HIGH VOLTAGE

Signals to the personnel that the operation described could cause electrocution if not

performed according to the safety rules.

GENERIC DANGER

It informs the personnel concerned that if the operation is not carried out in

compliance with the safety regulations, it presents the risk of suering physical

damage.

DANGER DUE TO HEAT

It informs the personnel concerned that if the operation is not carried out in

compliance with the safety regulations, it presents the risk of burns due to contact

with components at very high temperatures.

DO NOT COVER

Indicates to the personnel concerned, that it is prohibited to cover the appliance,

to prevent over-heating.

ATTENTION

• Indicates that this document must be read carefully before installing and/or

using the appliance.

• Indicates that the assistance personnel must handle the appliance following

the installation manual.

ATTENTION

• Indicates that there may be additional information in attached manuals.

• Indicates that information is available in the user manual or in the installation

manual.

ATTENTION

Indicates that the assistance personnel must handle the appliance following the

installation manual.

0.3 - GENERAL WARNINGS

1. This document is restricted in use to the terms of the law and may not be copied or

transferred to third parties without the express authorization of the manufacturer,

OLIMPIA SPLENDID.

  Ourmachinesaresubjecttochangeandsomepartsmayappeardierentfromthe

onesshownhere,withoutthisaectingthetextofthemanualinanyway.

WHEN USING ELECTRICAL EQUIPMENT,

BASIC SAFETY PRECAUTIONS MUST ALWAYS BE FOLLOWED IN

ORDER TO REDUCE RISKS OF FIRE, ELECTRIC SHOCKS

AND INJURY, INCLUDING THE FOLLOWING:

ENGLISH

EN - 4

2. Read this manual carefully before performing any operation (installation,

maintenance, use) and follow the instructions contained in each chapter.

3. File the instruction manual in a safe place for future reference.

4. After removing the packaging, check that the appliance is in perfect condition.

The packaging materials must not be left within reach of children as this can be

dangerous.

5. THE MANUFACTURER IS NOT RESPONSIBLE FOR DAMAGES TO PERSONS

OR PROPERTY CAUSED BY FAILURE TO FOLLOW THE INSTRUCTIONS IN THIS

MANUAL.

6. The manufacturer reserves the right to make any changes it deems advisable to its

models, although the essential features described in this manual remain the same.

7.Thedehumidiermaybedangerouswhileservicingsince,Insidethisappliance,an

under-pressure refrigerant gas and live electrical components are present which

could make it dangerous to untrained personnel during maintenance.

  Forthisreason,possiblemaintenanceinterventions(withtheexceptionof lters

cleaning)mustbeperformedexclusivelybyauthorizedandqualiedpersonnel.

8. Failing to comply with the instructions contained in this manual, and using the unit

with temperatures exceeding the permissible temperature range will invalidate the

warranty.

 9. Routinemaintenanceoftheltersandgeneralexternalcleaningcanbedonebythe

user as these operations are straight forward.

10. During assembly and at each maintenance operation, it is necessary to note the

precautions indicated in this manual and on the labels located inside or on the

appliance, as well as to take all the precautions suggested by common sense and

by the Safety Regulations in force in the country of installation.

11. In case of replacement of parts, use only original OLIMPIA SPLENDID parts.

12. If the unit is unused for a long period, or climate-controlled room is not used, it is

recommended to disconnect the electric power supply in order to prevent accidents.

13. Do not use liquid or corrosive detergents to clean the unit, do not spray water or

other liquids onto the unit, as it may damage the plastic components or even cause

electric shocks.

14. Do not get the appliance wet.

  Shortcircuitsorresmayoccur.

Do not immerse the appliance in water or in other liquids.

15. In case of functioning anomalies (for example: abnormal noise, bad smell, smoke,

abnormal increase in temperature, electrical dispersions, etc.), immediately switch

otheapplianceanddisconnecttheplugfromthepowersocket.

For repair work contact solely the technical service centres authorised by the

AQUARIA

ENGLISH

EN - 5

manufacturer and ask for original spare parts to be used. Failure to do this can

aectthesafetyoftheappliance.

16. Do not leave the appliance active if there are opened doors or windows.

17. Do not disconnect the power plug during functioning.

Fire or electrical shocks hazard.

18. Do not place heavy or hot objects on top of the appliance.

Do not sit or stand on the appliance.

19. Before electrically connecting the appliance, make sure the plate data correspond to

those of the distribution network. The power socket must be equipped with a Ground

System. The label (T) is located inside the appliance, only visible by extracting the

tank (Fig.2).

20. Install the appliance according to the manufacturer’s instructions. An incorrect

installation can cause injury to people, animals or property for which the manufacturer

accepts no responsibility.

21. Do not let the appliance work in enclosed areas such as a cabinet since it could

causeare.

22. If the appliance’s plug is incompatible with the socket, have the socket replaced

withasuitableonebyaqualiedtechnician,whomustascertainthatthesection

of the socket cables is compatible with the power rated by the appliance. We do

not recommend using adaptors and/or extension leads. If they cannot be avoided,

however, they must comply with current safety regulations and their amperage (A)

must not be below the maximum amperage of the appliance.

23. This appliance is NOT intended to be run via an external timer or with a separate

remote control system.

24. Always and only use the appliance in a vertical position.

25. Do not obstruct the air inlet and outlet grids in any manner.

26. Do not insert objects in the air inlet and outlet grids as this will create the risk of

electricalshocks,reordamagestotheappliance.

27. Do not use the appliance:

- with wet or damp hands;

- barefoot.

28. Do not pull the power cable or the appliance itself to remove the plug from the

socket.

29. Do not use this product under direct sunlight or near a heat source such as a stove,

heater or radiator (Fig.3).

30. Do not use the appliance near gas equipment (Fig.3).

ENGLISH

EN - 6

31. Do not activate the appliance near curtains since they can be sucked in the air vents

(Fig.5)

32. Always place the appliance on a stable, sturdy and levelled surface.

33. Leave at least 20cm of free space on the sides and behind the appliance and leave

at least 30cm of free space above the appliance (Fig.1).

34. Do not place the appliance near a power socket (Fig.4).

35. The socket must be easily accessible so that the plug can be removed easily in an

emergency.

36. Do not handle the plug with wet hands.

37. Do not excessively bend, twist, pull or damage the power cord.

38. Do not run the cord under carpeting, throw rugs or runners etc. Arrange cord away

fromtracareassothatitwillnotbetrippedover.

39. Unplug the cord when unit is not in use for an extended period of time and/or when

no one is home.

40. Do not use the appliance outdoors or on wet surfaces. Avoid dropping liquids on

the appliance. Do not use the appliance near sinks and taps.

41. Do not tilt the appliance to any side since water which may leak could damage it.

41a. Empty the water which has been collected in the tank.

If installed, the drainage pipe must be inclined down in order to ensure that

condensing water is continuously drained.

42. Clean the appliance with a damp cloth; do not use abrasive products or materials.

Seetheappropriateparagraphfortheltercleaning.

43. The most common cause of overheating is dust or lint deposit in the appliance.

Regularly remove these accumulations by disconnecting the appliance from the

power socket and vacuuming the grids.

 44. Donotusetheapplianceinenvironmentssubjecttosignicanttemperaturechanges

as condensation could form inside the appliance itself.

45. Install the appliance at least 2 meters from other electronic devices (TV, radio,

computer, dvd player, etc.) in order to avoid disturbances (Fig.6).

46. Do not use the appliance if insecticide gas has just been sprayed in the room or in

the presence of burning incenses, chemical vapours or oily residues.

 47. Donotusetheapplianceiftheltersarenotpositionedcorrectly.

48. Disassembly, repair or reconversion performed by an unauthorized person could

cause major damage and will cancel the manufacturer warranty.

AQUARIA

ENGLISH

EN - 7

49. Do not use the appliance in case of malfunctioning or faults, if the cord or plug are

damaged,orifithasbeendroppedordamagedinanymanner.Turntheapplianceo,

disconnecttheplugfromthesocketandgetitcheckedbyprofessionallyqualied

personnel.

50. Neither disassemble nor modify the appliance.

51. In the presence of gas leaks from other equipment, ventilate the room well before

turning on the appliance.

52. Use the appliance in environments with a temperature between 5°C and 35°C.

53. Repairing the appliance by yourself is extremely dangerous.

54. If you no longer wish to use this appliance, it must be made inoperative by cutting

the power supply cable after removing the plug from the power socket. Hazardous

parts of the appliance must be made safe, especially as there is a risk of children

playing with it.

55. Do not leave the appliance exposed to the outside environment (rain, sun, etc.).

56. Do not use the appliance in the immediate vicinity of a bathtub, a shower or a pool.

Fuse: 2 A

0.4 - PROPER USE

 • Theappliancemustbeusedexclusivelyasfanordehumidierwiththesolepurpose

of making the room where you are staying comfortable.

• This appliance is only intended for a domestic use or similar.

• An improper use of the appliance with possible injuries caused to people, property or

animals releases OLIMPIA SPLENDID from any responsibility.

0.5 - UNINTENDED AND POTENTIALLY DANGEROUS USE

 • The dehumidiers must not be installed in environments with the presence of

inammable gases, explosive gases, in very humid environments (laundries,

greenhouses, etc.), or in places with other machines that generate a strong heat

source, in proximity of a sources of salt water or sulphurous water.

• DONOTusegas,gasolineorotherinammableliquidsneartotheappliance.

Thisproductmustbeusedexclusivelyaccordingtothespecications

indicatedinthismanual.Usedierenttothatspecied,couldcauseserious

injuries.

THE MANUFACTURER IS NOT LIABLE FOR INJURY/DAMAGE TO

PERSONS/OBJECTS DERIVING FROM FAILURE TO COMPLY WITH THE

REGULATIONS CONTAINED IN THIS MANUAL.

ENGLISH

EN - 8

0.6 - WARNINGS FOR R290 REFRIGERANT GAS

1. THE APPLIANCE CONTAINS R290 GAS (FLAMMABILITY CLASSIFICA-

TION A3).

2. THE APPLIANCE SHALL BE STORED IN A WELL-VENTILATED AREA

WHERE THE ROOM SIZE CORRESPONDS TO THE ROOM AREA AS

SPECIFIED FOR OPERATION.

THE APPLIANCE MUST BE INSTALLED, USED AND STORED IN A ROOM

WITH A FLOOR SURFACE HIGHER THAN THE

THIS APPLIANCE CONTAINS A QUANTITY OF REFRIGERANT GAS

R290 EQUAL TO THE ONE INDICATED IN THE DATA LABEL LOCATED

ON THE APPLIANCE.

5. THE APPLIANCE SHALL BE STORED IN A ROOM WITHOUT

CONTINUOUSLY OPERATING IGNITION SOURCES (FOR EXAMPLE:

OPEN FLAMES, AN OPERATING GAS APPLIANCE OR AN OPERATING

ELECTRIC HEATER).

6. Do not pierce or burn.

7. Be aware that the refrigerants may not contain an odour.

8. R290 is a refrigerant gas in compliance with the European directives on

environment. Do not pierce any part of the refrigerant circuit.

9. Do not use means to accelerate the defrosting process or to clean, other

than those recommended by the manufacturer.

 10.Donotusetoolsdierentfromthoserecommendedbythemanufacturer

when defrosting and cleaning the appliance.

11. If the appliance is installed, used or stored in a non-ventilated area, the room

must be designed to prevent the accumulation of refrigerant leaks with

theconsequentreorexplosionhazardduetotherefrigerantcombustion

caused by electrical heaters, stoves or others sources of ignition.

12. Compliance with national gas regulations shall be observed.

13. Keep ventilation openings clear of obstruction.

14. The appliance shall be stored so as to prevent mechanical damage from

occurring.

15. Any person who is involved with working on or breaking into a refrigerant

circuitshouldholdacurrentvalidcerticatefromanindustry-accredited

assessment authority, which authorises their competence to handle

refrigerants safely in accordance with an industry recognised assessment

specication.

16. Servicing shall only be performed as recommended by the equipment

manufacturer. Maintenance and repair requiring the assistance of other

skilled personnel shall be carried out under the supervision of the person

competentintheuseofammablerefrigerants.

AQUARIA

ENGLISH

EN - 9

17. TRANSPORT OF EQUIPMENT CONTAINING FLAMMABLE REFRIGERANTS

See transport regulations.

18. MARKING OF EQUIPMENT USING SIGNS

See local regulations.

19. DISPOSAL OF EQUIPMENT USING FLAMMABLE REFRIGERANTS

See national regulations.

20. STORAGE OF EQUIPMENT/APPLIANCES

The storage of equipment should be in accordance with the manufacturer’s

instructions.

21. STORAGE OF PACKED (UNSOLD) EQUIPMENT

Storage package protection should be constructed such that mechanical damage

to the equipment inside the package will not cause a leak of the refrigerant charge.

The maximum number of pieces of equipment permitted to be stored together will

be determined by local regulations.

22. INFORMATION ON SERVICING

a) Checks to the area

Prior to beginning work on systems containing ammable refrigerants, safety

checks are necessary to ensure that the risk of ignition is minimised.

For repair to the refrigerating system, the following precautions shall be

complied with prior to conducting work on the system.

b) Work procedure

Work shall be undertaken under a controlled procedure so as to minimise

the risk of a ammable gas or vapour being present while the work is being

performed.

c) General work area

All maintenance sta and others working in the local area shall be instructed

on the nature of work being carried out.

Work in conned spaces shall be avoided.

The area around the workspace shall be sectioned o.

Ensure that the conditions within the area have been made safe by control of

ammable material.

d) Checking for presence of refrigerant

The area shall be checked with an appropriate refrigerant detector prior to

and during work, to ensure the technician is aware of potentially ammable

atmospheres.

Ensure that the leak detection equipment being used is suitable for use with

ammable refrigerants, i.e. non-sparking, adequately sealed or intrinsically

safe.

e) Presence of re extinguisher

If any hot work is to be conducted on the refrigeration equipment or any

associated parts, appropriate re extinguishing equipment shall be available

at hand.

Have a dry powder or CO2 re extinguisher adjacent to the charging area.

ENGLISH

EN - 10

f) No ignition sources

No person carrying out work in relation to a refrigeration system which involves

exposing any pipe work that contains or has contained ammable refrigerant

shall use any sources of ignition in such a manner that it may lead to the risk

of re or explosion.

All possible ignition sources, including cigarette smoking, should be kept

suciently far away from the site of installation, repairing, removing and

disposal, during which ammable refrigerant can possibly be released to the

surrounding space.

Prior to work taking place, the area around the equipment is to be surveyed to

make sure that there are no ammable hazards or ignition risks. No Smoking

signs shall be displayed.

g) Ventilated area

Ensure that the area is in the open or that it is adequately ventilated before

breaking into the system or conducting any hot work.

A degree of ventilation shall continue during the period that the work is carried

out.

The ventilation should safely disperse any released refrigerant and preferably

expel it externally into the atmosphere.

h) Checks to the refrigeration equipment

Where electrical components are being changed, they shall be t for the

purpose and to the correct specication.

At all times the manufacturer’s maintenance and service guidelines shall be

followed.

If in doubt consult the manufacturer’s technical department for assistance.

The following checks shall be applied to installations using ammable

refrigerants:

The charge size is in accordance with the room size within which the refrigerant

containing parts are installed; The ventilation machinery and outlets are

operating adequately and are not obstructed; If an indirect refrigerating circuit

is being used, the secondary circuit shall be checked for the presence of

refrigerant; Marking to the equipment continues to be visible and legible.

Markings and signs that are illegible shall be corrected; Refrigeration pipe or

components are installed in a position where they are unlikely to be exposed to

any substance which may corrode refrigerant containing components, unless

the components are constructed of materials which are inherently resistant to

being corroded or are suitably protected against being so corroded.

i) Checks to electrical devices

Repair and maintenance to electrical components shall include initial safety

checks and component inspection procedures. If a fault exists that could

compromise safety, then no electrical supply shall be connected to the circuit

until it is satisfactorily dealt with. If the fault cannot be corrected immediately

but it is necessary to continue operation, an adequate temporary solution

shall be used.

This shall be reported to the owner of the equipment so all parties are advised.

Initial safety checks shall include: That capacitors are discharged: this shall

be done in a safe manner to avoid possibility of sparking; That there no live

electrical components and wiring are exposed while charging, recovering or

purging the system; That there is continuity of earth bonding.

AQUARIA

ENGLISH

EN - 11

23. REPAIRS TO SEALED COMPONENTS

a) During repairs to sealed components, all electrical supplies shall be

disconnected from the equipment being worked upon prior to any removal of

sealed covers, etc. If it is absolutely necessary to have an electrical supply

to equipment during servicing, then a permanently operating form of leak

detection shall be located at the most critical point to warn of a potentially

hazardous situation.

b) Particular attention shall be paid to the following to ensure that by working on

electrical components, the casing is not altered in such a way that the level of

protection is aected.

This shall include damage to cables, excessive number of connections,

terminals not made to original specication, damage to seals, incorrect tting

of glands, etc.

Ensure that apparatus is mounted securely.

Ensure that seals or sealing materials have not degraded such that they no

longer serve the purpose of preventing the ingress of ammable atmospheres.

Replacement parts shall be in accordance with the manufacturer’s

specications.

The use of silicon sealant may inhibit the eectiveness of some types of

leak detection equipment. Intrinsically safe components do not have to be

isolated prior to working on them.

24. REPAIR TO INTRINSICALLY SAFE COMPONENTS

Do not apply any permanent inductive or capacitance loads to the circuit

without ensuring that this will not exceed the permissible voltage and current

permitted for the equipment in use. Intrinsically safe components are the

only types that can be worked on while live in the presence of a ammable

atmosphere.

The test apparatus shall be at the correct rating.

Replace components only with parts specied by the manufacturer.

Other parts may result in the ignition of refrigerant in the atmosphere from a

leak.

25. CABLING

Check that cabling will not be subject to wear, corrosion, excessive pressure,

vibration, sharp edges or any other adverse environmental eects.

The check shall also take into account the eects of aging or continual vibration

from sources such as compressors or fans.

26. DETECTION OF FLAMMABLE REFRIGERANTS

Under no circumstances shall potential sources of ignition be used in the

searching for or detection of refrigerant leaks.

A halide torch (or any other detector using a naked ame) shall not be used.

27. LEAK DETECTION METHODS

The following leak detection methods are deemed acceptable for systems

containing ammable refrigerants.

Electronic leak detectors shall be used to detect ammable refrigerants, but

the sensitivity may not be adequate, or may need re-calibration. (Detection

equipment shall be calibrated in a refrigerant-free area).

ENGLISH

EN - 12

Ensure that the detector is not a potential source of ignition and is suitable for

the refrigerant used

Leak detection equipment shall be set at a percentage of the LFL of the

refrigerant and shall be calibrated to the refrigerant employed and the

appropriate percentage of gas (25 % maximum) is conrmed.

Leak detection uids are suitable for use with most refrigerants but the use of

detergents containing chlorine shall be avoided as the chlorine may react with

the refrigerant and corrode the copper pipe-work.

If a leak is suspected, all naked ames shall be removed/ extinguished.

If a leakage of refrigerant is found which requires brazing, all of the refrigerant

shall be recovered from the system, or isolated (by means of shut o valves)

in a part of the system remote from the leak.

Oxygen free nitrogen (OFN) shall then be purged through the system both

before and during the brazing process.

28. REMOVAL AND EVACUATION

When breaking into the refrigerant circuit to make repairs or for any other

purpose conventional procedures shall be used.

However, it is important that best practice is followed since ammability is a

consideration.

The following procedure shall be adhered to:

• Remove refrigerant;

• Purge the circuit with inert gas;

• Evacuate;

• Purge again with inert gas;

• Open the circuit by cutting or brazing.

The refrigerant charge shall be recovered into the correct recovery cylinders.

The system shall be ushed with OFN to render the unit safe.

This process may need to be repeated several times.

Compressed air or oxygen shall not be used for this task.

Flushing shall be achieved by breaking the vacuum in the system with OFN

and continuing to ll until the working pressure is achieved, then venting to

atmosphere, and nally pulling down to a vacuum.

This process shall be repeated until no refrigerant is within the system. When

the nal OFN charge is used, the system shall be vented down to atmospheric

pressure to enable work to take place.

This operation is absolutely vital if brazing operations on the pipe-work are to

take place.

Ensure that the outlet for the vacuum pump is not close to any ignition sources

and there is ventilation available.

29. CHARGING PROCEDURES

In addition to conventional charging procedures, the following requirements

shall be followed.

Ensure that contamination of dierent refrigerants does not occur when using

charging equipment. Hoses or lines shall be as short as possible to minimise

the amount of refrigerant contained in them. Cylinders shall be kept upright.

Ensure that the refrigeration system is earthed prior to charging the system

with refrigerant. Label the system when charging is complete (if not already).

Extreme care shall be taken not to overll the refrigeration system. Prior to

recharging the system it shall be pressure tested with OFN.

AQUARIA

ENGLISH

EN - 13

The system shall be leak tested on completion of charging but prior to

commissioning. A follow up leak test shall be carried out prior to leaving the

site.

30. DECOMMISSIONING

Before carrying out this procedure, it is essential that the technician is

completely familiar with the equipment and all its detail. It is recommended

good practice that all refrigerants are recovered safely.

Prior to the task being carried out, an oil and refrigerant sample shall be

taken in case analysis is required prior to re-use of reclaimed refrigerant. It is

essential that electrical power is available before the task is commenced.

a) Become familiar with the equipment and its operation.

b) Isolate system electrically.

c) Before attempting the procedure ensure that:

• Mechanical handling equipment is available, if required, for handling

refrigerant cylinders;

• All personal protective equipment is available and being used

correctly;

• The recovery process is supervised at all times by a competent person;

• Recovery equipment and cylinders conform to the appropriate standards.

d) Pump down refrigerant system, if possible.

e) If a vacuum is not possible, make a manifold so that refrigerant can be

removed from various parts of the system.

f) Make sure that cylinder is situated on the scales before recovery takes

place.

g) Start the recovery machine and operate in accordance with manufacturer’s

instructions.

h) Do not overll cylinders. (No more than 80 % volume liquid charge).

i) Do not exceed the maximum working pressure of the cylinder, even

temporarily.

j) When the cylinders have been lled correctly and the process completed,

make sure that the cylinders and the equipment are removed from site

promptly and all isolation valves on the equipment are closed o.

k) Recovered refrigerant shall not be charged into another refrigeration

system unless it has been cleaned and checked.

31. LABELLING

Equipment shall be labelled stating that it has been de-commissioned and

emptied of refrigerant.

The label shall be dated and signed.

Ensure that there are labels on the equipment stating the equipment contains

ammable refrigerant.

ENGLISH

EN - 14

32. RECOVERY

When removing refrigerant from a system, either for servicing or

decommissioning, it is recommended good practice that all refrigerants are

removed safely.

When transferring refrigerant into cylinders, ensure that only appropriate

refrigerant recovery cylinders are employed.

Ensure that the correct number of cylinders for holding the total system charge

is available.

All cylinders to be used are designated for the recovered refrigerant and

labelled for that refrigerant (i.e. special cylinders for the recovery of refrigerant).

Cylinders shall be complete with pressure relief valve and associated shut-o

valves in good working order.

Empty recovery cylinders are evacuated and, if possible, cooled before

recovery occurs.

The recovery equipment shall be in good working order with a set of instructions

concerning the equipment that is at hand and shall be suitable for the recovery

of ammable refrigerants.

In addition, a set of calibrated weighing scales shall be available and in good

working order.

Hoses shall be complete with leak-free disconnect couplings and in good

condition.

Before using the recovery machine, check that it is in satisfactory working order,

has been properly maintained and that any associated electrical components

are sealed to prevent ignition in the event of a refrigerant release.

Consult manufacturer if in doubt.

The recovered refrigerant shall be returned to the refrigerant supplier in the

correct recovery cylinder, and the relevant Waste Transfer Note arranged.

Do not mix refrigerants in recovery units and especially not in cylinders. If

compressors or compressor oils are to be removed, ensure that they have

been evacuated to an acceptable level to make certain that ammable

refrigerant does not remain within the lubricant.

The evacuation process shall be carried out prior to returning the compressor

to the suppliers.

Only electric heating to the compressor body shall be employed to accelerate

this process.

When oil is drained from a system, it shall be carried out safely.

La pagina si sta caricando...

Olimpia Splendid AQUARIA S1 Manuale utente

Marca: Olimpia Splendid

Modello: AQUARIA S1

Tipo: Manuale utente

Scarica PDF

rapporto

in altre lingue

English: Olimpia Splendid AQUARIA S1 User manual

Olimpia Splendid AQUARIA S1 Manuale utente

Olimpia Splendid AQUARIA S1 Manuale utente

in altre lingue

Documenti correlati

Altri documenti