Available with programming software settings -----------------

1. Press and hold the PF2 button, at the same time power on and keeps pressing the PF2 button

for about 1 second. After seeing the green light flashing and hearing three beeps, it enters the

wireless copy and receiving mode.

2. Press and hold the PF1 button, at the same time power on and keeps pressing the PF2 button

for about 1 second, see the red light flashing and hear three beeps, and then enter the wireless

copy transmission mode.

! Press the PTT button, the red light is flashing and data is being transmitted at this time, and it

will automatically exit this mode after rebooting.

! When the red and green lights of the receiving radio are flashing crosswise, data is being

received. When the receiver finished receiving the data, the power will restart.

cannot be turned on and only the green light is on. The list of CTCSS/DCS is as follows:

Dispose of them according to the laws in your area.

Licence-exempt radio apparatus

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science

and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following

two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired

operation of the device.

• DO NOT operate the radio without a proper antenna attached, as this may damage the radio and

may also cause you to exceed RF exposure limits. A proper antenna is the antenna supplied with

this radio by the manufacturer or an antenna specifically authorized by the manufacturer for use

with this radio, and the antenna gain shall not exceed the specified gain by the manufacturer

declared.

• DO NOT transmit for more than 50% of total radio use time, more than 50% of the time can cause

RF exposure compliance requirements to be exceeded.

• During transmissions, your radio generates RF energy that can possibly cause interference with

other devices or systems. To avoid such interference, turn off the radio in areas where signs are

posted to do so.

• Mobile Device, during operation, the separation distance between user and the antenna subjects

to actual regulations, this separation distance will ensure that there is sufficient distance from a

properly installed externally-mounted antenna to satisfy the RF exposure requirements.

• Occupational/Controlled Radio, this radio is designed for and classified as “Occupational/Controlled

Use Only”, meaning it must be used only during the course of employment by individuals aware of

the hazards, and the ways to minimize such hazards; NOT intended for use in a General population

/uncontrolled environment.

• General population/uncontrolled Radio, this radio is designed for and classified as “General

population/uncontrolled Use”.

• Use the lowest volume necessary to do your job.

• Turn up the volume only if you are in noisy surroundings.

• Turn down the volume before adding headset or earpiece.

• Limit the amount of time you use headsets or earpieces at high volume.

• When using the radio without a headset or earpiece, do not place the radio's

speaker directly against your ear.

• Use careful with the earphone maybe possible excessive sound

pressure from earphones and headphones can cause hearing loss.

Note: Exposure to loud noises from any source for extended periods of time may

temporarily or permanently affect your hearing. The louder the radio's volume,

comes into contact with the skin when the radio is in use, a minor burn can result.

• When the conductive material such as jewelry, keys or chains touch exposed

terminals of the batteries, may complete an electrical circuit (short circuit the battery)

and become hot to cause bodily injury such as burns. Exercise care in handling any

battery, particularly when placing it inside a pocket, purse or other container with

metal objects

• When the transceiver is used for long transmissions, the radiator and chassis will

become hot.

• Do not place a portable radio in the area over an air bag or in the air bag

deployment area. The radio may be propelled with great force and cause serious

injury to occupants of the vehicle when the air bag inflates.

• Pull by the plug rather than the cord when disconnecting the charger.

• Unplug the charger from the AC outlet before attempting any maintenance or

cleaning.

• Contact Retevis for assistance regarding repairs and service.

• The adapter shall be installed near the equipment and shall be easily accessible.

Halten Sie die Definitionstaste gedrückt, während die Alarmfunktion 2 Sekunden lang eingestellt ist,

Verfügbar mit Einstellungen der Programmiersoftware-----------------

• N'UTILISEZ PAS la radio sans l'antenne appropriée, car cela pourrait l'endommager et pourrait

également vous amener à dépasser les limites d'exposition RF. Une antenne appropriée est

l'antenne fournie avec cette radio par le fabricant ou une antenne spécifiquement autorisée par le

fabricant pour une utilisation avec cette radio. Le gain d'antenne ne doit pas dépasser le gain

spécifié par le fabricant.

• NE TRANSMETTEZ PAS pendant plus de 50% du temps total d'utilisation de la radio. Plus de 50%

du temps peut entraîner le dépassement des exigences de conformité en matière d'exposition aux

radiofréquences.

• Pendant les transmissions, votre radio génère une énergie RF pouvant éventuellement causer des

• Lorsque vous passez ou recevez un appel téléphonique, tenez votre appareil radio comme un

Questo walkie talkie utilizza l'energia elettromagnetica nello spettro a radiofrequenza (RF) per

fornire comunicazioni tra due o più utenti su una distanza. Se usata in modo improprio, l'energia a

radiofrequenza può causare danni biologici.

Tutti Retevis walkie talkie sono progettate, prodotte e testate per garantire che soddisfino i livelli di

esposizione RF stabiliti dal governo. Inoltre, i produttori raccomandano anche istruzioni operative

specifiche per gli utenti dei walkie talkie. Queste istruzioni sono importanti perché informano gli

utenti sull'esposizione a energia RF e forniscono semplici procedure su come controllarlo.

stabiliti di esposizione alle radiofrequenze: http://www.who.int/en/

esposizione a radiofrequenza. Inoltre, il manuale dell'utente Retevis o un libretto di sicurezza

separato includono le informazioni e le istruzioni operative necessarie per controllare l'esposizione

RF e soddisfare i requisiti di conformità.

I governi mantengono le radio in classificazione,radio bidirezionali aziendali operano su frequenze

radio che sono regolate dai dipartimenti di gestione radio locali (FCC, ISED, OFCOM, ANFR, BFTK,

Bundesnetzagentur ...). Per trasmettere su queste frequenze, è richiesto di avere una licenza rilas-

ciata da loro. La classificazione dettagliata e l'uso di walkie talkie, si prega di contattare i dipartimenti

di gestione radio del governo locale.

L'utilizzo di questa radio al di fuori del paese in cui è previsto che sia distribuito è soggetto alle

one di una persona certificata come tecnicamente qualificata, per eseguire la manutenzione e le

riparazioni del trasmettitore nei servizi mobili e fissi terrestri privati come certificato da un rapprese-

ntante dell'organizzazione dell'utente di tali Servizi.

La sostituzione di qualsiasi componente del trasmettitore (cristallo, semiconduttore, ecc.) non è

autorizzato dai dipartimenti di gestione radio del governo locale, potrebbe violare le regole.