MyBinding 1264WF Manuale utente

Tipo
Manuale utente

Questo manuale è adatto anche per

GBC TITAN 1264 WF 64"
Wide Format Laminator
Instruction Manual
Provided By
http://www.MyBinding.com
http://www.MyBindingBlog.com
GBC
Titan 1244/1264
Laminator
Instruction Manual
GBC 1264WF/1244WF Operation Manual
© 2006 General Binding Corporation Page 1
GBC TITAN 1264WF/1244WF
INSTALLATION & OPERATING MANUAL
Part Number: 930-144 Rev A.
GB
Operating Instructions
I
Istruzioni per l'Uso
D
Bedienungsanleitungen
NL
Gebruiksaanwijzing
F
Mode d'Emploi
E
Instrucciones de Operación
Part Number:
1264 WF 3600242
1244 WF 3600238
GBC 1264WF/1244WF Operation Manual
© 2006 General Binding Corporation Page 2
The information in this publication is provided for reference and is believed to be accurate and complete General Binding Corporation (GBC) is not liable for errors in
this publication or for incidental or consequential damage in connection with the furnishing or use of the information in this publication, including, but not limited to,
any implied warranty of fitness or merchantability for any particular use
GBC reserves the right to make changes to this publication and to the products described in it without notice All specifications and information concerning products are
subject to change without notice Reference in this publication to information or products protected by copyright or patent does not convey any license under the rights
of GBC or others GBC assumes no liability arising from infringements of patents or any other rights of third parties
This publication is copyrighted © 2006 by GBC All rights reserved The information contained in this publication is proprietary and may not be reproduced, stored,
transmitted, or transferred, in whole or in part, in any form without the prior and express written permission of GBC
Le informazioni contenute in questo documento sono fornite a titolo di referenza e sono considerate corrette e complete General Binding Corporation (GBC) no si
responsabilizza di eventuali errori contenuti in questo documento, né di danni incidentali o conseguenti relazionati con la fornitura e l’uso delle informazioni in questo
documento, includendo senza limitazioni qualsiasi garanzia d’idoneità o commerciabilità per qualsiasi uso particolare
GBC si riserva il diritto di effettuare cambi a questo documento e ai prodotti in esso descritti senza preavviso Tutte le specifiche e le informazioni sui prodotti sono
soggette a cambio senza preavviso
In questo documento le referenze a informazioni e prodotti protetti da diritti di proprietà intellettuale o brevetti non trasferiscono nessuna licenza alla quale abbiano
diritto GBC o altri GBC non assume nessuna responsabilità derivante dalla violazione di brevetti o di qualsiasi altro diritto di terzi
Copyright © 2006 Questo documento è soggetto ai diritti di proprietà intellettuale di GBC Riservati tutti i diritti Le informazioni contenute in questo documento sono
di proprietà esclusiva e non possono essere riprodotte, conservate, trasferite, in tutto o in parte ed in modo alcuno, senza la previa autorizzazione espressa e per iscritto
di GBC
Die Informationen in dieser Druckschrift werden als Richtlinien zur Verfügung gestellt und sind unseres Wissens richtig und vollständig General Binding Corporation
(GBC) lehnt jede Haftung für Fehler in dieser Druckschrift sowie für Schadenersatz oder Folgeschäden im Zusammenhang mit der Bereitstellung oder Verwendung der
hierin enthaltenden Informationen ab, ein- aber nicht ausschließlich die Gewährleistung für Eignung und handelsübliche Qualität für einen bestimmten Zweck
GBS behält sich das Recht vor, diese Druckschrift und die darin beschriebenen Produkte ohne Vorankündigung zu ändern Alle die Produkte betreffenden
Leistungsbeschreibungen und Informationen können jederzeit ohne Vorankündigung geändert werden
Durch die Bezugnahmen in dieser Druckschrift auf urheberrechtlich oder durch ein Patent geschützte Informationen oder Produkte werden keine Rechte von GBC oder
Dritten übertragen GBC lehnt jede Haftung für Patentverletzungen sowie für die Verletzung anderer Rechte von Dritten ab
Diese Druckschrift ist durch GBC urheberrechtlich geschützt (© 2006) Alle Rechte vorbehalten Die Informationen in dieser Druckschrift sind gesetzlich geschützt und
dürfen ohne vorherige und ausdrückliche schriftliche Genehmigung von GBC in keiner Weise weder ganz noch teilweise vervielfältigt, aufbewahrt, weiter verbreitet
oder übertragen werden
De informatie in deze publicatie geldt slechts ter verwijzing en wordt nauwkeurig en volledig geacht General Binding Corporation (GBC) is niet aansprakelijk voor
fouten in deze publicatie of voor incidentele of voortvloeiende schade in verband met het verschaffen of gebruik van de informatie in deze publicatie, inclusief, maar
niet beperkt tot stilzwijgende garanties van geschiktheid voor een bepaald doel of verkoopbaarheid
GBC behoudt zich het recht voor om zonder voorafgaande kennisgeving wijzigingen te maken in deze publicatie en in de producten die hierin worden beschreven Alle
specificaties en informatie m b t producten kunnen zonder voorafgaande kennisgeving gewijzigd worden
Verwijzingen in deze publicatie naar informatie of producten beschermd door copyrights of patenten houdt geen licenties onder de rechten van GBC of anderen in GBC
is niet aansprakelijk voor schendingen van patenten of andere rechten van derden
De publicatie is auteursrechtelijk beschermd, copyright © 2006 door GBC Alle rechten voorbehouden De informatie in deze publicatie is eigendom van GBC en mag
niet verveelvuldigd, opgeslagen, overgebracht of overgedragen worden, geheel of gedeeltelijk, in welke vorm dan ook zonder voorafgaande en uitdrukkelijke
schriftelijke toestemming van GBC
L’information contenue dans cette publication est fournie à titre de référence et elle est considérée exacte et complète General Binding Corporation (GBC) n’est pas
responsable des erreurs contenues dans cette publication ni des dommages indirects ou consécutifs portant sur l’utilisation ou la présentation de l’information de ce
document, y compris, mais sans s’y limiter, toute garantie implicite de commercialité ou d’adaptation à un usage particulier
GBC se réserve le droit d’apporter des modifications à cette publication et aux produits qui y sont décrits sans préavis Toutes les spécifications et l’information au sujet
des produits sont sujettes à changements sans préavis
Toute référence à l’information ou aux produits protégés par un droit d’auteur ou un brevet présentée dans ce document ne porte aucune licence sous les droits de GBC
ou d’autres parties GBC n’assume aucune responsabilité découlant de contraventions aux brevets ou à tout autre droit de tierces parties
Cette publication est protégée par un droit d’auteur © 2006 de GBC Tous droits réservés L’information contenue dans cette publication est privative et ne peut pas être
reproduite, mise en mémoire, transmise ou transférée, en partie ou en entier, sous quelque forme que ce soit sans la permission écrite préalable et expresse de GBC
La información contenida en esta publicación es proporcionada a título de referencia y se considera que es precisa y completa General Binding Corporation (GBC) no
es responsable por errores contenidos en esta publicación o por daños consecuentes o incidentales relacionados con la disponibilidad o el uso de la información en esta
publicación, incluyendo y sin limitarse a, cualquier garantía de aptitud y comerciabilidad para cualquier uso específico
GBC se reserva el derecho de hacer cambios en esta publicación y a los productos descritos en la misma sin aviso previo Todas las características y la información
referente a los productos, están sujetas a cambios sin aviso previo
Las referencias en esta publicación a información o productos protegidos por derechos de propiedad intelectual o por patentes no otorga ninguna licencia amparada por
los derechos de GBC u otros GBC no asume ninguna responsabilidad que se derive de la violación de patentes u otros derechos de terceras partes
Copyright © 2006 Esta publicación está amparada por derechos de propiedad intelectual de GBC Todos los derechos reservados La información contenida en este
documento es de propiedad exclusiva y no puede reproducirse, almacenarse, transmitirse o transferirse, en su totalidad o en partes, y de ninguna manera, sin la
autorización previa y por escrito de GBC
GBC 1264WF/1244WF Operation Manual
© 2006 General Binding Corporation Page 3
TABLE OF CONTENTS
Description
Page
No.
Description
Page
No.
Cover
Legal Disclaimer
Table of Contents
Important Safety Instructions
Important Safeguards
General ,Electric & Service
Warranty
Specifications
Pre- Installation
Installation
Section 1-Detailed Specifications:
Description
Features
Applications
Section 2-Consumables:
Film Types
Film Dimensions
Core Size
Film Widths
Paper Widths
Section 3-Function:
Speed
Motor
Heating Capabilities
Controls
Roll Design
Section 4-Electrical:
Requirements
BTU Output
Heater Wattage
Amperage Draw
D/C Voltage Used
A/C Voltage Used
Plug Configuration and Type
Section 5-Dimensions:
Weight
Dimensions
Nip Height
Section 6-know your Laminator:
Parts reference Guide
Front View
Rear View
Left Side View
Right Side View
Definition of Parts
Section 7-Display Control Panel:
Stand-By Mode
Jobs
Measure
Cooling
Run
1
2
3
4
4
5
5
6
6
7
7
7
8
8
8
8
8
9
9
9
9
9
9
9
10
10
10
10
11
12
12
12
13
14
14
15
15
16
17
17
17
17
17
Top/Bottom Temperature Control
Stop
Reverse
Auto-Off
Ready
Wait
Section 8-Safety:
Emergency Stops
Safety Shield
Feed Table
Section 9-How To Guide:
Loading Film
Select and Change Nip Settings
In-Line Slitters
Rear Cut-Off Blade
Section 10-Applicatations:
Film Loading and Threading
Load a Roll of Film
Webbing Thermal Film using
Threading Card
Webbing PSA Film / Mount Adhesive
Using Threading Card
Start Laminating
Method for Tacking new Film to
Existing Film
To Unweb The Laminator
Clearing a Film Jam (Wrap Up)
Applications
Tips for Pre-Coating Boards
Tips for Mounting Pre-Coated Boards
Tips for Single Sided Lamination
Tips for Creating a Decal
Tips for Mounting a Decal
Thermal Encapsulation
AccuShield
Speed/Temperature Control
The Art of Lamination
Basic Rules
Film Tension
Heat
Output
Maintenance
Trouble Shooting Guide
Service Agreement
18
18
18
19
19
19
20
20
21
22
24
25
25
26
27
28
29
30
31
31
32
32
32
33
33
33
34
33
35
35
35
36
37
38
38
GBC 1264WF/1244WF Operation Manual
© 2006 General Binding Corporation Page 4
IMPORTANT SAFETY INSTRUCTIONS
YOUR SAFETY AS WELL AS THE SAFETY OF
OTHERS IS IMPORTANT TO GBC. IN THIS
INSTRUCTION MANUAL AND ON THE PRODUCT,
YOU WILL FIND IMPORTANT SAFETY MESSAGES
REGARDING THE PRODUCT. READ THESE
MESSAGES CAREFULLY. READ ALL OF THE
INSTRUCTIONS AND SAVE THESE
INSTRUCTIONS FOR LATER USE.
THE SAFETY ALERT SYMBOL PRECEDES
EACH SAFETY MESSAGE IN THIS
INSTRUCTION MANUAL. THE SYMBOL
INDICATES A POTENTIAL PERSONAL
SAFETY HAZARD TO YOU OR OTHERS.
THE FOLLOWING WARNINGS ARE
FOUND UPON THIS PRODUCT.
ADVERTENCIA
Attention
Avertissement
Riesgo de choque
eléctrico
No abra:
Adentro no hay
piezas reparables
por el usuario.
Mantenimiento
solamente por
personal calificado
Risque de
Secousseélectrique.
Ne pas ouvrir.
Pas de pièces
réparables par
l'utilisateur.
Entretien
seulement par
personnel qualifié.
Electrical shock
hazard.
Do not open.
No user serviceable
parts inside.
Refer servicing to
qualified service
personnel.
THIS SAFETY MESSAGE MEANS THAT YOU
COULD BE SERIOUSLY HURT OR KILLED IF YOU
OPEN THE PRODUCT AND EXPOSE YOURSELF
TO HAZARDOUS VOLTAGE.
THIS SAFETY MESSAGE MEANS THAT YOU
COULD BE BURNED AND YOUR FINGERS COULD
BE TRAPPED AND CRUSHED IN THE HOT
ROLLERS. CLOTHING, JEWELRY AND LONG
HAIR COULD BE CAUGHT IN THE ROLLERS AND
PULL YOU INTO THEM.
ADVERTENCIA
Attention
Avertissement
NAVAJA FILOSA.
Mantener manos y
dedos a distancia.
LAME
COUPANTE.
Tenir mains et
doigts à l'écart.
SHARP BLADE.
Keep hands and
clothing away.
THIS SAFETY MESSAGE MEANS THAT YOU
COULD CUT YOURSELF IF YOU ARE NOT
CAREFUL.
WARNING: THIS SAFETY ALERT
SYMBOL PRECEDES EACH SAFETY
MESSAGE IN THIS INSTRUCTION
MANUAL. THE SYMBOL INDICATES A
POTENTAL PERSONAL SAFETY HAZARD
TO YOU OR OTHERS.
WARNING: DO NOT ATTEMPT TO
SERVICE OR REPAIR THE 1264/1244 WF
LAMINATOR.
WARNING: DO NOT CONNECT THE
LAMINATOR TO AN ELECTRICAL
SUPPLY OR ATTEMPT TO OPERATE THE
LAMINATOR UNTIL YOU HAVE
COMPLETELY READ THESE
INSTRUCTIONS. MAINTAIN THESE
INSTRUCTIONS IN A CONVENIENT
LOCATION FOR FUTURE REFERENCE.
IMPORTANT SAFEGUARDS
WARNING: TO GUARD AGAINST INJURY
THE FOLLOWING SAFETY
PRECAUTIONS MUST BE OBSERVED IN
INSTALLATION AND USE OF THE
LAMINATOR.
General:
Keep hands, long hair, loose clothing, and articles such as
necklaces or ties away from the front of the heat and pull
rollers to avoid entanglement and entrapment.
The heat rollers can reach temperatures over 300 F (150 C).
Avoid contact with the heat rollers during operation or shortly
after power has been removed from the laminator.
Keep hands and fingers away from the path of the sharp film
cutter blades.
Do not use the laminator for other than its intended purpose.
Avoid moving the Laminator on uneven floor surfaces. Never
tilt the laminator.
Do not defeat or remove electrical and mechanical safety
equipment such as interlocks, shields and guards.
Do not insert objects unsuitable for laminating or expose the
equipment to liquids.
Electrical:
The Laminator should be connected only to a source of power
as indicated in these instructions and on the serial plate located
on the rear of the laminator. Contact an electrician should the
attachment plug provided with the Laminator not match the
receptacles at your location.
WARNING: THE RECEPTACLE MUST BE
LOCATED NEAR THE EQUIPMENT AND
EASILY ACCESSIBLE.
Do not operate the Laminator with a damaged power supply
cord or attachment plug, upon occurrence of a malfunction, or
after the laminator has been damaged. Contact GBC’s
Technical Service Department or your dealer/distributor for
assistance.
Service:
Perform only the routine maintenance procedures referred to in
these instructions
WARNING: DO NOT ATTEMPT TO SERVICE
OR REPAIR THE LAMINATOR
Disconnect the plug from the receptacle and contact GBC’s
Technical Department or your dealer/distributor when one or
more of the following has occurred.
The power supply cord or attachment plug is damaged.
Liquid has been spilled into the laminator.
The laminator is malfunctioning after being mishandled.
The laminator does not operate as described in these
instructions.
ADVERTENCIA
Attention
Avertissement
RODILLOS
CALIENTES.
PUNTO DE
PINCHAMIENTO.
Mantener manos y
ropa a distancia.
ROULEAUX
CHAUDS.
POINT DE
PINCEMENT.
Tenir mains et
vêtements à
l'écart.
HOT ROLLS.
PINCH POINT.
Keep hands and
clothing away.
GBC 1264WF/1244WF Operation Manual
© 2006 General Binding Corporation Page 5
WARRANTY
Limited 90- Day Warranty
GBC warrants to the original purchaser for a period of ninety
days on labor and one year on parts after installation that this
laminator is free from defects in workmanship and material
under normal use and service. GBC’s obligation under this
limited warranty is limited to replacement or repair, at GBC’s
option, of any part found defective by GBC without charge for
material or labor.
THIS LIMITED WARRANTY IS IN LIEU OF ALL
OTHER WARRANTIES EXPRESSED OR IMPLIED.
WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE ARE EXPRESSLY
EXCLUDED. ANY REPRESENTATIONS OR PROMISES
INCONSISTENT WITH, OR IN ADDITION TO, THIS
LIMITED WARRANTY ARE UNAUTHORIZED AND
SHALL NOT BE BINDING UPON GBC. IN NO EVENT
SHALL GBC BE LIABLE FOR ANY SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES,
WHETHER OR NOT FORESEEABLE.
This limited warranty shall be void if the laminator has been
misused; mishandled; damaged by negligence, by accident,
during shipment, or due to exposure to extreme conditions;
repaired, altered, moved, or installed by anyone other than GBC
or its authorized agents; or if incompatible film was used.
GBC’s obligation under this limited warranty does not include
routine maintenance, cleaning, adjustment, normal cosmetic or
mechanical wear, or freight charges.
Without limiting the generality of the previous paragraph,
GBC’s obligation under this limited warranty does not include:
1. Damage caused to the rollers by knives, razors, or other
sharp tools: by any foreign objects falling into the working
area of the laminator; or by cleaning the laminator with
solutions or materials that harm its surfaces;
2. Damage caused by adhesives; nor
3. Damage caused by lifting, tilting or attempting to position
the laminator other than rolling it on its castors across even
surfaces.
FOR EUROPEAN UNION RESIDENTS ONLY: This
guarantee does not affect the legal rights which consumers have
under applicable national legislation governing the sale of
consumer goods.
SPECIFICATIONS
Operating Speed
0 to 10 fpm (3.0m/min) MAX
Maximum Temperature
320 F (160 C)
Maximum Mounting
Thickness
Main Roller-5/8
th
in. (15 mm) Max.
Pull Roller-5/8
th
in. (15mm)
Maximum Film Width
1264WF
1244WF
61 in. (155. cm.), 62 in. Pressure Sensitive Films
42 in. Max paper width. (107 cm.), 42 In. Pressure Sensitive Films.
Dimensions (W x D x H)
1246WF
1244WF
Unit alone: (Uncrated)
80 in. x 28in. x 51in. (203 cm. x71 cm x 129 cm.)
60 in. x 28in. x 51in. (152 cm. x71 cm x 129 cm.)
Weight
1244 WF
1264 WF
Unit alone:
275 lbs (125 kg)
600 lbs (272 kg)
Electrical Requirements
US Models-
CE Models-
Refer to the serial plate located on the rear of the laminator for the specific electrical rating
applicable to the unit. Unit is rated for 220VAC-240AC. Do not exceed 240VAC. For best results it
is recommended that 230VAC be used.
230V, 30Amps, 60 HZ. Single Phase. 7000Watts 80.in x 28in. x 51in. (203 cm. x71 cm x 129 cm.)
230V, 15Amps, 50 HZ .Single Phase, 7000 Watts 80.in x 28in. x 51in. (203 cm. x71 cm x 129 cm.)
FCC NOTE
FCC Class A Notice - Notification pour les Etats-Unis
Note: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiated radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at their own expense.
Canada Class A Notice - Avis Canada, Class A
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
Modifications
Any modifications made to this device that are not approved by General Binding Corporation may
void the authority granted to the user by the FCC and/or by Industry Canada to operate this
equipment.
Toutes modifications apportées à ce dispositif et non approuvées par General Binding Corporation
annuleront le droit accordé à l'utilisateur par le FCC et/ou par Industrie Canada de faire fonctionner
cet équipement.
GBC 1264WF/1244WF Operation Manual
© 2006 General Binding Corporation Page 6
PRE-INSTALLATION
Before a 1264WF/1244WF Laminator can be installed,
ensure the following requirements are met:
1. Are doorways and hallways wide enough for the
laminator to be moved to the installation site?
2. Is there ample room for the laminator?
A work area must be established that allows for
operation in both the front and rear of the
laminator and provides space for efficient
material flow.
3. Is the environment appropriate for the laminator?
The laminator requires a clean, dust and vapor
free environment to operate properly.
Avoid locating the laminator near sources of heat
or cold. Avoid locating the laminator in the
direct path of forced, heated or cooled air.
CAUTION: Air flow can cause uneven
heating / cooling of the rollers and result in
poor output quality.
4. Have you contacted a certified electrician to wire
the receptacle and ensure that adequate power is
being supplied, having the appropriate capacity,
over current protection and safety lockouts
available?
GBC 1264 WF/1244 WF Requires:
230V at 60Hz with 30 amps single phase.
1264WF: Nema 6-30P 30A 230V Receptacle.
1244WF: Nema 6-20P 20A 230V Receptacle.
The machines are supplied with Male Plugs.
INSTALLATION
1. Shipping damage should be brought to the immediate attention of the delivering carrier.
2. With assistance, carefully roll the laminator into position over flat and even surfaces.
3. The laminator should be positioned to allow exiting film to flow freely to the floor or a work table. Accumulation of
laminate immediately behind the laminator as it exits the equipment may cause the film to wrap around the pull rollers,
resulting in a “jammed” condition.
4. Avoid locating the laminator near sources of heat or cold. Avoid locating the laminator in the direct path of forced,
heated or cooled air.
5. Once the laminator has been properly positioned, lock the castors in place. Locking the castors prevent the machine
from rolling during set up, operation or servicing.
6. Connect the attachment plug provided with the laminator to a suitably grounded outlet. Avoid connecting other
equipment to the same branch circuit to which the laminator is connected, as this may result in nuisance tripping of
circuit breakers or blowing fuses.
Note: Machine must be leveled to ensure best performance. Level the machine by lowering both the main and pull rolls.
Lay a level on top of the main and pull rolls. Then, check level from main roll to pull roll on right and left side of the
roll. Finally, check by placing the level diagonally across lower main to lower pull rolls.
GBC 1264WF/1244WF Operation Manual
© 2006 General Binding Corporation Page 7
Section 1: Detailed Specifications
Specifications provide all of the technical data for
the Titan 1244WF &1264WF
Description:
Features:
Applications:
A high speed laminator for the graphic arts
professional as well as for the manufacturer
who produces promotional pieces in-house. A
new elegant design, low power consumption
and first class safety and quality assurances.
Roller heating technology
Independent control of each heater
Thermal and cold lamination capabilities
Unique vented cooling system
Mounting capabilities to5/8
th
in.-15mm.
Easy to use control panel
9 Programmable job settings
LCD temperature displays for each heat roller
Rear out put slitter.
Swing out shafts for ease of loading film.
In-Line slitters.
Accushield capable.
Encapsulation-Promotional-materials, posters,
counter cards, POP displays, calendars,
instructional displays, phone & debit cards,
blueprints, menus, maps, flipcharts, etc.
GBC 1264WF/1244WF Operation Manual
© 2006 General Binding Corporation Page 8
Section 2: Consumables
Film Types:
Film Diameters:
Core Size:
Film widths:
Paper widths:
Poly-in films, thermal and PSA films
Poly-out films, thermal and PSA
Accushield
Up to a 7 in. outside roll diameter. (18 cm.)
3 in. core standard. (76 cm.)
1264WF
61 in. Thermal films (155 cm.)
62 in. PSA (157 cm.)
12444WF
42 in. maximum paper width (107 cm.)
42 in. PSA films (107 cm.)
1264WF
62 in. Maximum paper width (157 cm.)
12444WF
42 in. maximum paper width (107 cm.)
GBC 1264WF/1244WF Operation Manual
© 2006 General Binding Corporation Page 9
Section 3: Function
Speed:
Motor:
Heating Capabilities:
Controls:
Roll Design:
Section 4: Electrical
Requirements:
1264 WF:
1264WF CE:
1244 WF:
1244WF CE:
B.T.U output:
1264 WF:
1264WF CE:
1244 WF:
1244WF CE:
0-10 fpm (0-6.1mpm)
DC Geared Motor
Up to 320* F. (160*C)
Operations control panel
High release silicone main rollers
High release pull roll
230 VAC, 60Hz, Single phase, 30Amps.
230 VAC, 50Hz. Single phase, 20Amps.
230 VAC, 60Hz. Single phase, 20 Amps.
230 VAC, 50Hz. Single phase, 20 Amps.
30708 B.T.U./hour
22519 B.T.U./hour
20472 B.T.U./hour
GBC 1264WF/1244WF Operation Manual
© 2006 General Binding Corporation Page 10
Heater Wattage:
1264 WF:
1264WF CE:
1244 WF:
1244WF CE:
Amperage draw:
1264 WF:
1264WF CE:
1244 WF:
1244WF CE:
D/C Voltage used:
A/C Voltage Used:
4500W / Heater
3300W / Heater
3000 W / Heater
Drive Motor=3.3 Amps.
Fan Motor=0.5 Amps.
Motors and Heater=25 Amps.
Drive Motor=3.3 Amps.
Fan Motor=0.5 Amps.
Motors and Heater=13 Amps.
Drive Motor=3.3 Amps
Fan Motor=0.5 Amps
Motors and Heater=12Amps
36 VDC Motor Voltage
24 VDC Fan Motor
230 VAC Recommended…(Not to exceed
240VAC)
GBC 1264WF/1244WF Operation Manual
© 2006 General Binding Corporation Page 11
Connectors for 1264 WF
NEMA 6-30 P
NEMA 6-30 R
Connectors for 1244 WF
NEMA 6-20 P
NEMA 6-20 R
GBC 1264WF/1244WF Operation Manual
© 2006 General Binding Corporation Page 12
Section 5: Dimensions
Weight:
1264 WF:
1264WF CE:
1244 WF:
1244WF CE:
Dimensions:
1264 WF:
1264WF CE:
1244 WF:
1244WF CE:
Nip Height:
Crated: 750 lbs. (340 kg.)
Uncrated: 600 lbs. (272 kg.)
Crated: 350 lbs (159 kg.)
Uncrated: 275 lbs (125 kg.)
Crated: 58 in.(H) x 87 in. (W) x 40 in. (D)
147 cm. (H) x 221 cm. (W) x 102 cm. (D)
Uncrated: 49in(H) x 77.25 in.(W) x 25.5 in. (D)
124 cm. (H) x196 cm. (W) x65cm. (D)
Crated: 57 in.(H) x 68 in. (W) x 38 in. (D)
145 cm. (H) x 173 cm. (W) x 97 cm. (D)
Uncrated: 49in(H) x 77.25 in.(W) x 25.5 in. (D)
124 cm. (H) x145 cm. (W) x65cm. (D)
35.63 in (91cm.)
GBC 1264WF/1244WF Operation Manual
© 2006 General Binding Corporation Page 13
Section 6: Know your Laminator
This section is intended to aide the user in becoming more familiar with the 1244 WF & 1264
WF laminators. Refer back to this section if you have questions regarding references to certain
parts of the laminator in this laminator.
1.) Safety Shield 9.) Rewind Clutch Adjustment Knob
2.) Control Panel 10.) Rewind Shaft & Rewind Tube
3.) Feed Table 11.) Rear Slitter
4.) Lower Film Shaft/Unwind Shaft 12.) Power Switch
5.) Upper Film Shaft/Unwind Shaft 13.) Foot Pedal
6.) Unwind Brake 14.) Power Cord
7.) Pressure Plate 15.) Web Clutch
8.) Emergency Stop/E-Stop 16.) Roller Lift Handle/Gap Adjustment Handle
GBC 1264WF/1244WF Operation Manual
© 2006 General Binding Corporation Page 14
GBC 1264WF/1244WF Operation Manual
© 2006 General Binding Corporation Page 15
GBC 1264WF/1244WF Operation Manual
© 2006 General Binding Corporation Page 16
Know your Laminator Continued-
1.) Safety Shield:
The Safety Shield aids in preventing the
operators fingers from becoming
pinched or burned in the heat rollers of
the laminator. With the Safety Shield
raised or removed, the machine goes
into the safety mode that prevents the
run button on the control panel from
starting the rollers to turn. The foot
pedal must be used when the Safety
Shield is raised or removed.
2.) Control Panel:
The Control Panel enables the operator
to control motor run/stop, motor
direction, motor speed, cooling fans, top
temperature, bottom temperature, job
number selection, job programming and
temperature reading.
3.) Feed Table:
The Feed Table supports the product
that is to be laminated. It also prevents
full access to the roller nip (where the
upper and lower roller meet) of the
laminator. Because of this, the
laminator has been designed not to
operate when the Feed Table is
removed. Re-install the Feed Table
before attempting to operate the
laminator.
4.) Lower Film Shaft/Unwind Shaft:
The Lower Film Shaft/Unwind Shaft
holds the lower film and allows the end
user to apply tension to the web.
5.) Upper Film Shaft/Unwind Shaft:
The Upper Film Shaft/Unwind Shaft
holds the Upper film and allows the end
user to apply tension to the web.
6.) Unwind Brake:
The Unwind Brakes are used to apply
tension to the web.
7.) Pressure Plate:
The Pressure Plate assists in keeping the
leading edge and the trailing edge of the
print flat when fed into the laminator.
8.) Emergency Stop/E-Stop:
The Emergency/E-Stops are a safety
feature that allows the operator to stop
the rollers from rotating by depressing
them as needed.
9.) Rewind Clutch Knob:
The rewinder is clutch driven. As you
increase the tension on the Rewind
Clutch Knob, the amount of force is
increased and increases the rate/strength
of the rewinder.
10.) Rewind Shaft:
The Rewind Shaft is driven by a clutch
system. The greater you increase the
clutch; the amount of force is increased
and increases the rate/strength of the
rewinder.
11.) Rear Slitter:
The Rear slitter is intended to cut the
web output from the laminator and
should not be used for any other
purpose.
12.) Power Switch:
The Main Power Switch turns the
laminator on and off. It supplies power
to the laminator.
13.) Foot Pedal:
The Foot Pedal allows the operator to
start and stop the machine without using
the Main Control Panel.
14.) Power Cord:
The Power cord comes with the machine
and requires certain plug configurations.
Please see the Specs to determine
correct outlet configuration.
15.) Web Clutch:
Use the Web clutch to control tension
between the main rolls and the pull
rollers. This will assist the end user in
ensuring good output.
16.) Roll Lift Handle/Gap Adjust. Handle:
Use this Handle to select the proper
settings depending on what application
is to be used.
GBC 1264WF/1244WF Operation Manual
© 2006 General Binding Corporation Page 17
Section 7: Display Control Panel
Stand-by
Pressing STAND-BY will cause the
laminator to go into the AUTO-OFF mode.
The laminator will automatically go into this
mode after sitting idle for an extended
amount of time. When in AUTO-OFF mode
the laminator will no longer continue to heat
the main rollers to save power.
Stand-by
Pressing MEMORY will cause the current
speed and heat settings to be recorded in the
JOB memory location shown on the display.
Jobs
Pressing the up or down arrows will cause
the unit to cycle through stored jobs. Up to
9 separate jobs can be stored. To save a job,
select one of the nine jobs to overwrite.
Then change the heat and speed settings as
required for your application. Once
selected, press the memory button once.
Measure
Press and hold the MEASURE key to
display the current roller temperature.
Cooling
When the COOLING button is pressed the
cooling fans will turn on or off. The
COOLING button will illuminate green
when the fans are on. The fans blow fresh
air on the film web in between the heat and
pull rollers.
Run
When the RUN is pressed the rollers will
begin turning. However, pressing run will
not cause the rollers to turn when any of the
following are true: the Emergency Stop is
engaged, Safety Shield is raised or removed
and/or the feed table is removed.
GBC 1264WF/1244WF Operation Manual
© 2006 General Binding Corporation Page 18
Display Control Panel-Continued
Top and Bottom Temperature
Use the up or down arrow keys to increase
or decrease the set temperature of the heat
rollers. The temperature shown on the
display is the temperature at which the unit
is attempting to attain. For example if the
unit is set to 200*F even though the actual
roller temperature may be higher or lower.
To view the actual temperature press
MEASURE.
Stop
The STOP button ceases the forward
rotation of the rollers.
Reverse
Pressing the REVERSE button causes the
rollers to turn in the reverse direction. The
rollers will only turn in reverse as long as
the REVERSE button is depressed.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41

MyBinding 1264WF Manuale utente

Tipo
Manuale utente
Questo manuale è adatto anche per

in altre lingue