MyBinding Titan 1244WF Manuale utente

GBC TITAN 1264 WF 64"

Wide Format Laminator

Instruction Manual

Provided By

http://www.MyBinding.com

http://www.MyBindingBlog.com

GBC

Titan 1244/1264

Laminator

Instruction Manual

GBC 1264WF/1244WF Operation Manual

GBC TITAN 1264WF/1244WF

INSTALLATION & OPERATING MANUAL

Part Number: 930-144 Rev A.

GB

Operating Instructions

I

Istruzioni per l'Uso

D

Bedienungsanleitungen

NL

Gebruiksaanwijzing

F

Mode d'Emploi

E

Instrucciones de Operación

Part Number:

1264 WF 3600242

1244 WF 3600238

GBC 1264WF/1244WF Operation Manual

GB

The information in this publication is provided for reference and is believed to be accurate and complete General Binding Corporation (GBC) is not liable for errors in

this publication or for incidental or consequential damage in connection with the furnishing or use of the information in this publication, including, but not limited to,

any implied warranty of fitness or merchantability for any particular use

GBC reserves the right to make changes to this publication and to the products described in it without notice All specifications and information concerning products are

subject to change without notice Reference in this publication to information or products protected by copyright or patent does not convey any license under the rights

of GBC or others GBC assumes no liability arising from infringements of patents or any other rights of third parties

transmitted, or transferred, in whole or in part, in any form without the prior and express written permission of GBC

I

Le informazioni contenute in questo documento sono fornite a titolo di referenza e sono considerate corrette e complete General Binding Corporation (GBC) no si

responsabilizza di eventuali errori contenuti in questo documento, né di danni incidentali o conseguenti relazionati con la fornitura e l’uso delle informazioni in questo

documento, includendo senza limitazioni qualsiasi garanzia d’idoneità o commerciabilità per qualsiasi uso particolare

GBC si riserva il diritto di effettuare cambi a questo documento e ai prodotti in esso descritti senza preavviso Tutte le specifiche e le informazioni sui prodotti sono

soggette a cambio senza preavviso

In questo documento le referenze a informazioni e prodotti protetti da diritti di proprietà intellettuale o brevetti non trasferiscono nessuna licenza alla quale abbiano

diritto GBC o altri GBC non assume nessuna responsabilità derivante dalla violazione di brevetti o di qualsiasi altro diritto di terzi

di proprietà esclusiva e non possono essere riprodotte, conservate, trasferite, in tutto o in parte ed in modo alcuno, senza la previa autorizzazione espressa e per iscritto

di GBC

D

Die Informationen in dieser Druckschrift werden als Richtlinien zur Verfügung gestellt und sind unseres Wissens richtig und vollständig General Binding Corporation

(GBC) lehnt jede Haftung für Fehler in dieser Druckschrift sowie für Schadenersatz oder Folgeschäden im Zusammenhang mit der Bereitstellung oder Verwendung der

hierin enthaltenden Informationen ab, ein- aber nicht ausschließlich die Gewährleistung für Eignung und handelsübliche Qualität für einen bestimmten Zweck

GBS behält sich das Recht vor, diese Druckschrift und die darin beschriebenen Produkte ohne Vorankündigung zu ändern Alle die Produkte betreffenden

Leistungsbeschreibungen und Informationen können jederzeit ohne Vorankündigung geändert werden

Durch die Bezugnahmen in dieser Druckschrift auf urheberrechtlich oder durch ein Patent geschützte Informationen oder Produkte werden keine Rechte von GBC oder

Dritten übertragen GBC lehnt jede Haftung für Patentverletzungen sowie für die Verletzung anderer Rechte von Dritten ab

dürfen ohne vorherige und ausdrückliche schriftliche Genehmigung von GBC in keiner Weise weder ganz noch teilweise vervielfältigt, aufbewahrt, weiter verbreitet

oder übertragen werden

NL

De informatie in deze publicatie geldt slechts ter verwijzing en wordt nauwkeurig en volledig geacht General Binding Corporation (GBC) is niet aansprakelijk voor

fouten in deze publicatie of voor incidentele of voortvloeiende schade in verband met het verschaffen of gebruik van de informatie in deze publicatie, inclusief, maar

niet beperkt tot stilzwijgende garanties van geschiktheid voor een bepaald doel of verkoopbaarheid

GBC behoudt zich het recht voor om zonder voorafgaande kennisgeving wijzigingen te maken in deze publicatie en in de producten die hierin worden beschreven Alle

specificaties en informatie m b t producten kunnen zonder voorafgaande kennisgeving gewijzigd worden

Verwijzingen in deze publicatie naar informatie of producten beschermd door copyrights of patenten houdt geen licenties onder de rechten van GBC of anderen in GBC

is niet aansprakelijk voor schendingen van patenten of andere rechten van derden

niet verveelvuldigd, opgeslagen, overgebracht of overgedragen worden, geheel of gedeeltelijk, in welke vorm dan ook zonder voorafgaande en uitdrukkelijke

schriftelijke toestemming van GBC

F

L’information contenue dans cette publication est fournie à titre de référence et elle est considérée exacte et complète General Binding Corporation (GBC) n’est pas

responsable des erreurs contenues dans cette publication ni des dommages indirects ou consécutifs portant sur l’utilisation ou la présentation de l’information de ce

document, y compris, mais sans s’y limiter, toute garantie implicite de commercialité ou d’adaptation à un usage particulier

GBC se réserve le droit d’apporter des modifications à cette publication et aux produits qui y sont décrits sans préavis Toutes les spécifications et l’information au sujet

des produits sont sujettes à changements sans préavis

Toute référence à l’information ou aux produits protégés par un droit d’auteur ou un brevet présentée dans ce document ne porte aucune licence sous les droits de GBC

ou d’autres parties GBC n’assume aucune responsabilité découlant de contraventions aux brevets ou à tout autre droit de tierces parties

reproduite, mise en mémoire, transmise ou transférée, en partie ou en entier, sous quelque forme que ce soit sans la permission écrite préalable et expresse de GBC

E

La información contenida en esta publicación es proporcionada a título de referencia y se considera que es precisa y completa General Binding Corporation (GBC) no

es responsable por errores contenidos en esta publicación o por daños consecuentes o incidentales relacionados con la disponibilidad o el uso de la información en esta

publicación, incluyendo y sin limitarse a, cualquier garantía de aptitud y comerciabilidad para cualquier uso específico

GBC se reserva el derecho de hacer cambios en esta publicación y a los productos descritos en la misma sin aviso previo Todas las características y la información

referente a los productos, están sujetas a cambios sin aviso previo

Las referencias en esta publicación a información o productos protegidos por derechos de propiedad intelectual o por patentes no otorga ninguna licencia amparada por

los derechos de GBC u otros GBC no asume ninguna responsabilidad que se derive de la violación de patentes u otros derechos de terceras partes

documento es de propiedad exclusiva y no puede reproducirse, almacenarse, transmitirse o transferirse, en su totalidad o en partes, y de ninguna manera, sin la

autorización previa y por escrito de GBC

GB

GBC 1264WF/1244WF Operation Manual

TABLE OF CONTENTS

Description

Page

No.

Description

Page

No.

Cover

Legal Disclaimer

Table of Contents

Important Safety Instructions

Important Safeguards

General ,Electric & Service

Warranty

Specifications

Pre- Installation

Installation

Section 1-Detailed Specifications:

Description

Features

Applications

Section 2-Consumables:

Film Types

Film Dimensions

Core Size

Film Widths

Paper Widths

Section 3-Function:

Speed

Motor

Heating Capabilities

Controls

Roll Design

Section 4-Electrical:

Requirements

BTU Output

Heater Wattage

Amperage Draw

D/C Voltage Used

A/C Voltage Used

Plug Configuration and Type

Section 5-Dimensions:

Weight

Dimensions

Nip Height

Section 6-know your Laminator:

Parts reference Guide

Front View

Rear View

Left Side View

Right Side View

Definition of Parts

Section 7-Display Control Panel:

Stand-By Mode

Jobs

Measure

Cooling

Run

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

Top/Bottom Temperature Control

Stop

Reverse

Auto-Off

Ready

Wait

Section 8-Safety:

Emergency Stops

Safety Shield

Feed Table

Section 9-How To Guide:

Loading Film

Select and Change Nip Settings

In-Line Slitters

Rear Cut-Off Blade

Section 10-Applicatations:

Film Loading and Threading

Load a Roll of Film

Webbing Thermal Film using

Threading Card

Webbing PSA Film / Mount Adhesive

Using Threading Card

Start Laminating

Method for Tacking new Film to

Existing Film

To Unweb The Laminator

Clearing a Film Jam (Wrap– Up)

Applications

Tips for Pre-Coating Boards

Tips for Mounting Pre-Coated Boards

Tips for Single Sided Lamination

Tips for Creating a Decal

Tips for Mounting a Decal

Thermal Encapsulation

AccuShield

Speed/Temperature Control

The Art of Lamination

Basic Rules

Film Tension

Heat

Output

Maintenance

Trouble Shooting Guide

Service Agreement

18

19

20

21

22

24

25

26

27

28

29

30

31

32

33

34

33

35

36

37

38

GBC 1264WF/1244WF Operation Manual

IMPORTANT SAFETY INSTRUCTIONS

YOUR SAFETY AS WELL AS THE SAFETY OF

OTHERS IS IMPORTANT TO GBC. IN THIS

INSTRUCTION MANUAL AND ON THE PRODUCT,

YOU WILL FIND IMPORTANT SAFETY MESSAGES

REGARDING THE PRODUCT. READ THESE

MESSAGES CAREFULLY. READ ALL OF THE

INSTRUCTIONS AND SAVE THESE

INSTRUCTIONS FOR LATER USE.

THE SAFETY ALERT SYMBOL PRECEDES

EACH SAFETY MESSAGE IN THIS

INSTRUCTION MANUAL. THE SYMBOL

INDICATES A POTENTIAL PERSONAL

SAFETY HAZARD TO YOU OR OTHERS.

THE FOLLOWING WARNINGS ARE

FOUND UPON THIS PRODUCT.

ADVERTENCIA

Attention

Avertissement

Riesgo de choque

eléctrico

No abra:

Adentro no hay

piezas reparables

por el usuario.

Mantenimiento

solamente por

personal calificado

Risque de

Secousseélectrique.

Ne pas ouvrir.

Pas de pièces

réparables par

l'utilisateur.

Entretien

seulement par

personnel qualifié.

Electrical shock

hazard.

Do not open.

No user serviceable

parts inside.

Refer servicing to

qualified service

personnel.

THIS SAFETY MESSAGE MEANS THAT YOU

COULD BE SERIOUSLY HURT OR KILLED IF YOU

OPEN THE PRODUCT AND EXPOSE YOURSELF

TO HAZARDOUS VOLTAGE.

THIS SAFETY MESSAGE MEANS THAT YOU

COULD BE BURNED AND YOUR FINGERS COULD

BE TRAPPED AND CRUSHED IN THE HOT

ROLLERS. CLOTHING, JEWELRY AND LONG

HAIR COULD BE CAUGHT IN THE ROLLERS AND

PULL YOU INTO THEM.

ADVERTENCIA

Attention

Avertissement

NAVAJA FILOSA.

Mantener manos y

dedos a distancia.

LAME

COUPANTE.

Tenir mains et

doigts à l'écart.

SHARP BLADE.

Keep hands and

clothing away.

THIS SAFETY MESSAGE MEANS THAT YOU

COULD CUT YOURSELF IF YOU ARE NOT

CAREFUL.

WARNING: THIS SAFETY ALERT

SYMBOL PRECEDES EACH SAFETY

MESSAGE IN THIS INSTRUCTION

MANUAL. THE SYMBOL INDICATES A

POTENTAL PERSONAL SAFETY HAZARD

TO YOU OR OTHERS.

WARNING: DO NOT ATTEMPT TO

SERVICE OR REPAIR THE 1264/1244 WF

LAMINATOR.

WARNING: DO NOT CONNECT THE

LAMINATOR TO AN ELECTRICAL

SUPPLY OR ATTEMPT TO OPERATE THE

LAMINATOR UNTIL YOU HAVE

COMPLETELY READ THESE

INSTRUCTIONS. MAINTAIN THESE

INSTRUCTIONS IN A CONVENIENT

LOCATION FOR FUTURE REFERENCE.

IMPORTANT SAFEGUARDS

WARNING: TO GUARD AGAINST INJURY

THE FOLLOWING SAFETY

PRECAUTIONS MUST BE OBSERVED IN

INSTALLATION AND USE OF THE

LAMINATOR.

General:

Keep hands, long hair, loose clothing, and articles such as

necklaces or ties away from the front of the heat and pull

rollers to avoid entanglement and entrapment.

The heat rollers can reach temperatures over 300 F (150 C).

Avoid contact with the heat rollers during operation or shortly

after power has been removed from the laminator.

Keep hands and fingers away from the path of the sharp film

cutter blades.

Do not use the laminator for other than its intended purpose.

Avoid moving the Laminator on uneven floor surfaces. Never

tilt the laminator.

Do not defeat or remove electrical and mechanical safety

equipment such as interlocks, shields and guards.

Do not insert objects unsuitable for laminating or expose the

equipment to liquids.

Electrical:

The Laminator should be connected only to a source of power

as indicated in these instructions and on the serial plate located

on the rear of the laminator. Contact an electrician should the

attachment plug provided with the Laminator not match the

receptacles at your location.

WARNING: THE RECEPTACLE MUST BE

LOCATED NEAR THE EQUIPMENT AND

EASILY ACCESSIBLE.

Do not operate the Laminator with a damaged power supply

cord or attachment plug, upon occurrence of a malfunction, or

after the laminator has been damaged. Contact GBC’s

Technical Service Department or your dealer/distributor for

assistance.

Service:

Perform only the routine maintenance procedures referred to in

these instructions

WARNING: DO NOT ATTEMPT TO SERVICE

OR REPAIR THE LAMINATOR

Disconnect the plug from the receptacle and contact GBC’s

Technical Department or your dealer/distributor when one or

more of the following has occurred.

 The power supply cord or attachment plug is damaged.

 Liquid has been spilled into the laminator.

 The laminator is malfunctioning after being mishandled.

 The laminator does not operate as described in these

instructions.

ADVERTENCIA

Attention

Avertissement

RODILLOS

CALIENTES.

PUNTO DE

PINCHAMIENTO.

Mantener manos y

ropa a distancia.

ROULEAUX

CHAUDS.

POINT DE

PINCEMENT.

Tenir mains et

vêtements à

l'écart.

HOT ROLLS.

PINCH POINT.

Keep hands and

clothing away.

GBC 1264WF/1244WF Operation Manual

WARRANTY

Limited 90- Day Warranty

GBC warrants to the original purchaser for a period of ninety

days on labor and one year on parts after installation that this

laminator is free from defects in workmanship and material

under normal use and service. GBC’s obligation under this

limited warranty is limited to replacement or repair, at GBC’s

option, of any part found defective by GBC without charge for

material or labor.

THIS LIMITED WARRANTY IS IN LIEU OF ALL

OTHER WARRANTIES EXPRESSED OR IMPLIED.

WARRANTIES OF MERCHANTABILITY OR FITNESS

FOR A PARTICULAR PURPOSE ARE EXPRESSLY

EXCLUDED. ANY REPRESENTATIONS OR PROMISES

INCONSISTENT WITH, OR IN ADDITION TO, THIS

LIMITED WARRANTY ARE UNAUTHORIZED AND

SHALL NOT BE BINDING UPON GBC. IN NO EVENT

SHALL GBC BE LIABLE FOR ANY SPECIAL,

INCIDENTAL, OR CONSEQUENTIAL DAMAGES,

WHETHER OR NOT FORESEEABLE.

This limited warranty shall be void if the laminator has been

misused; mishandled; damaged by negligence, by accident,

during shipment, or due to exposure to extreme conditions;

repaired, altered, moved, or installed by anyone other than GBC

or its authorized agents; or if incompatible film was used.

GBC’s obligation under this limited warranty does not include

routine maintenance, cleaning, adjustment, normal cosmetic or

mechanical wear, or freight charges.

Without limiting the generality of the previous paragraph,

GBC’s obligation under this limited warranty does not include:

1. Damage caused to the rollers by knives, razors, or other

sharp tools: by any foreign objects falling into the working

area of the laminator; or by cleaning the laminator with

solutions or materials that harm its surfaces;

2. Damage caused by adhesives; nor

3. Damage caused by lifting, tilting or attempting to position

the laminator other than rolling it on its castors across even

surfaces.

FOR EUROPEAN UNION RESIDENTS ONLY: This

guarantee does not affect the legal rights which consumers have

under applicable national legislation governing the sale of

consumer goods.

SPECIFICATIONS

Operating Speed

0 to 10 fpm (3.0m/min) MAX

Maximum Temperature

320 F (160 C)

Maximum Mounting

Thickness

Main Roller-5/8

th

in. (15 mm) Max.

Pull Roller-5/8

th

in. (15mm)

Maximum Film Width

1264WF

1244WF

61 in. (155. cm.), 62 in. Pressure Sensitive Films

42 in. Max paper width. (107 cm.), 42 In. Pressure Sensitive Films.

Dimensions (W x D x H)

1246WF

1244WF

Unit alone: (Uncrated)

80 in. x 28in. x 51in. (203 cm. x71 cm x 129 cm.)

60 in. x 28in. x 51in. (152 cm. x71 cm x 129 cm.)

Weight

1244 WF

1264 WF

Unit alone:

275 lbs (125 kg)

600 lbs (272 kg)

Electrical Requirements

US Models-

CE Models-

Refer to the serial plate located on the rear of the laminator for the specific electrical rating

applicable to the unit. Unit is rated for 220VAC-240AC. Do not exceed 240VAC. For best results it

is recommended that 230VAC be used.

230V, 30Amps, 60 HZ. Single Phase. 7000Watts 80.in x 28in. x 51in. (203 cm. x71 cm x 129 cm.)

230V, 15Amps, 50 HZ .Single Phase, 7000 Watts 80.in x 28in. x 51in. (203 cm. x71 cm x 129 cm.)

FCC NOTE

FCC Class A Notice - Notification pour les Etats-Unis

Note: This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiated radio frequency energy and, if not

installed and used in accordance with the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at their own expense.

Canada Class A Notice - Avis Canada, Class A

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

Modifications

Any modifications made to this device that are not approved by General Binding Corporation may

void the authority granted to the user by the FCC and/or by Industry Canada to operate this

equipment.

Toutes modifications apportées à ce dispositif et non approuvées par General Binding Corporation

annuleront le droit accordé à l'utilisateur par le FCC et/ou par Industrie Canada de faire fonctionner

cet équipement.

GBC 1264WF/1244WF Operation Manual

PRE-INSTALLATION

Before a 1264WF/1244WF Laminator can be installed,

ensure the following requirements are met:

1. Are doorways and hallways wide enough for the

laminator to be moved to the installation site?

2. Is there ample room for the laminator?

 A work area must be established that allows for

operation in both the front and rear of the

laminator and provides space for efficient

material flow.

3. Is the environment appropriate for the laminator?

 The laminator requires a clean, dust and vapor

free environment to operate properly.

 Avoid locating the laminator near sources of heat

or cold. Avoid locating the laminator in the

direct path of forced, heated or cooled air.

CAUTION: Air flow can cause uneven

heating / cooling of the rollers and result in

poor output quality.

4. Have you contacted a certified electrician to wire

the receptacle and ensure that adequate power is

being supplied, having the appropriate capacity,

over current protection and safety lockouts

available?

GBC 1264 WF/1244 WF Requires:

 230V at 60Hz with 30 amps single phase.

 1264WF: Nema 6-30P 30A 230V Receptacle.

 1244WF: Nema 6-20P 20A 230V Receptacle.

The machines are supplied with Male Plugs.

INSTALLATION

1. Shipping damage should be brought to the immediate attention of the delivering carrier.

2. With assistance, carefully roll the laminator into position over flat and even surfaces.

3. The laminator should be positioned to allow exiting film to flow freely to the floor or a work table. Accumulation of

laminate immediately behind the laminator as it exits the equipment may cause the film to wrap around the pull rollers,

resulting in a “jammed” condition.

4. Avoid locating the laminator near sources of heat or cold. Avoid locating the laminator in the direct path of forced,

heated or cooled air.

5. Once the laminator has been properly positioned, lock the castors in place. Locking the castors prevent the machine

from rolling during set up, operation or servicing.

6. Connect the attachment plug provided with the laminator to a suitably grounded outlet. Avoid connecting other

equipment to the same branch circuit to which the laminator is connected, as this may result in nuisance tripping of

circuit breakers or blowing fuses.

Note: Machine must be leveled to ensure best performance. Level the machine by lowering both the main and pull rolls.

Lay a level on top of the main and pull rolls. Then, check level from main roll to pull roll on right and left side of the

roll. Finally, check by placing the level diagonally across lower main to lower pull rolls.

GBC 1264WF/1244WF Operation Manual

Section 1: Detailed Specifications

Specifications provide all of the technical data for

the Titan 1244WF &1264WF

Description:

Features:

Applications:

 A high speed laminator for the graphic arts

professional as well as for the manufacturer

who produces promotional pieces in-house. A

new elegant design, low power consumption

and first class safety and quality assurances.

 Roller heating technology

 Independent control of each heater

 Thermal and cold lamination capabilities

 Unique vented cooling system

 Mounting capabilities to5/8

th

in.-15mm.

 Easy to use control panel

 9 Programmable job settings

 LCD temperature displays for each heat roller

 Rear out put slitter.

 Swing out shafts for ease of loading film.

 In-Line slitters.

 Accushield capable.

 Encapsulation-Promotional-materials, posters,

counter cards, POP displays, calendars,

instructional displays, phone & debit cards,

blueprints, menus, maps, flipcharts, etc.

GBC 1264WF/1244WF Operation Manual

Section 2: Consumables

Film Types:

Film Diameters:

Core Size:

Film widths:

Paper widths:

 Poly-in films, thermal and PSA films

 Poly-out films, thermal and PSA

 Accushield

 Up to a 7 in. outside roll diameter. (18 cm.)

 3 in. core standard. (76 cm.)

1264WF

 61 in. Thermal films (155 cm.)

 62 in. PSA (157 cm.)

12444WF

 42 in. maximum paper width (107 cm.)

 42 in. PSA films (107 cm.)

1264WF

 62 in. Maximum paper width (157 cm.)

12444WF

 42 in. maximum paper width (107 cm.)

GBC 1264WF/1244WF Operation Manual

Section 3: Function

Speed:

Motor:

Heating Capabilities:

Controls:

Roll Design:

Section 4: Electrical

Requirements:

 1264 WF:

 1264WF CE:

 1244 WF:

 1244WF CE:

B.T.U output:

 1264 WF:

 1264WF CE:

 1244 WF:

 1244WF CE:

 0-10 fpm (0-6.1mpm)

 DC Geared Motor

 Up to 320* F. (160*C)

 Operations control panel

 High release silicone main rollers

 High release pull roll

 230 VAC, 60Hz, Single phase, 30Amps.

 230 VAC, 50Hz. Single phase, 20Amps.

 230 VAC, 60Hz. Single phase, 20 Amps.

 230 VAC, 50Hz. Single phase, 20 Amps.

 30708 B.T.U./hour

 22519 B.T.U./hour

 20472 B.T.U./hour

GBC 1264WF/1244WF Operation Manual

Heater Wattage:

 1264 WF:

 1264WF CE:

 1244 WF:

 1244WF CE:

Amperage draw:

 1264 WF:

 1264WF CE:

 1244 WF:

 1244WF CE:

D/C Voltage used:

A/C Voltage Used:

 4500W / Heater

 3300W / Heater

 3000 W / Heater

 Drive Motor=3.3 Amps.

 Fan Motor=0.5 Amps.

 Motors and Heater=25 Amps.

 Drive Motor=3.3 Amps.

 Fan Motor=0.5 Amps.

 Motors and Heater=13 Amps.

 Drive Motor=3.3 Amps

 Fan Motor=0.5 Amps

 Motors and Heater=12Amps

 36 VDC Motor Voltage

 24 VDC Fan Motor

 230 VAC Recommended…(Not to exceed

240VAC)

GBC 1264WF/1244WF Operation Manual

Connectors for 1264 WF

NEMA 6-30 P

NEMA 6-30 R

Connectors for 1244 WF

NEMA 6-20 P

NEMA 6-20 R

GBC 1264WF/1244WF Operation Manual

Section 5: Dimensions

Weight:

 1264 WF:

 1264WF CE:

 1244 WF:

 1244WF CE:

Dimensions:

 1264 WF:

 1264WF CE:

 1244 WF:

 1244WF CE:

Nip Height:

 Crated: 750 lbs. (340 kg.)

 Uncrated: 600 lbs. (272 kg.)

 Crated: 350 lbs (159 kg.)

 Uncrated: 275 lbs (125 kg.)

 Crated: 58 in.(H) x 87 in. (W) x 40 in. (D)

147 cm. (H) x 221 cm. (W) x 102 cm. (D)

 Uncrated: 49in(H) x 77.25 in.(W) x 25.5 in. (D)

124 cm. (H) x196 cm. (W) x65cm. (D)

 Crated: 57 in.(H) x 68 in. (W) x 38 in. (D)

145 cm. (H) x 173 cm. (W) x 97 cm. (D)

 Uncrated: 49in(H) x 77.25 in.(W) x 25.5 in. (D)

124 cm. (H) x145 cm. (W) x65cm. (D)

 35.63 in (91cm.)

GBC 1264WF/1244WF Operation Manual

Section 6: Know your Laminator

This section is intended to aide the user in becoming more familiar with the 1244 WF & 1264

WF laminators. Refer back to this section if you have questions regarding references to certain

parts of the laminator in this laminator.

1.) Safety Shield 9.) Rewind Clutch Adjustment Knob

2.) Control Panel 10.) Rewind Shaft & Rewind Tube

3.) Feed Table 11.) Rear Slitter

4.) Lower Film Shaft/Unwind Shaft 12.) Power Switch

5.) Upper Film Shaft/Unwind Shaft 13.) Foot Pedal

6.) Unwind Brake 14.) Power Cord

7.) Pressure Plate 15.) Web Clutch

8.) Emergency Stop/E-Stop 16.) Roller Lift Handle/Gap Adjustment Handle

GBC 1264WF/1244WF Operation Manual

Know your Laminator Continued-

1.) Safety Shield:

 The Safety Shield aids in preventing the

operators fingers from becoming

pinched or burned in the heat rollers of

the laminator. With the Safety Shield

raised or removed, the machine goes

into the safety mode that prevents the

run button on the control panel from

starting the rollers to turn. The foot

pedal must be used when the Safety

Shield is raised or removed.

2.) Control Panel:

 The Control Panel enables the operator

to control motor run/stop, motor

direction, motor speed, cooling fans, top

temperature, bottom temperature, job

number selection, job programming and

temperature reading.

3.) Feed Table:

 The Feed Table supports the product

that is to be laminated. It also prevents

full access to the roller nip (where the

upper and lower roller meet) of the

laminator. Because of this, the

laminator has been designed not to

operate when the Feed Table is

removed. Re-install the Feed Table

before attempting to operate the

laminator.

4.) Lower Film Shaft/Unwind Shaft:

 The Lower Film Shaft/Unwind Shaft

holds the lower film and allows the end

user to apply tension to the web.

5.) Upper Film Shaft/Unwind Shaft:

 The Upper Film Shaft/Unwind Shaft

holds the Upper film and allows the end

user to apply tension to the web.

6.) Unwind Brake:

 The Unwind Brakes are used to apply

tension to the web.

7.) Pressure Plate:

 The Pressure Plate assists in keeping the

leading edge and the trailing edge of the

print flat when fed into the laminator.

8.) Emergency Stop/E-Stop:

 The Emergency/E-Stops are a safety

feature that allows the operator to stop

the rollers from rotating by depressing

them as needed.

9.) Rewind Clutch Knob:

 The rewinder is clutch driven. As you

increase the tension on the Rewind

Clutch Knob, the amount of force is

increased and increases the rate/strength

of the rewinder.

10.) Rewind Shaft:

 The Rewind Shaft is driven by a clutch

system. The greater you increase the

clutch; the amount of force is increased

and increases the rate/strength of the

rewinder.

11.) Rear Slitter:

 The Rear slitter is intended to cut the

web output from the laminator and

should not be used for any other

purpose.

12.) Power Switch:

 The Main Power Switch turns the

laminator on and off. It supplies power

to the laminator.

13.) Foot Pedal:

 The Foot Pedal allows the operator to

start and stop the machine without using

the Main Control Panel.

14.) Power Cord:

 The Power cord comes with the machine

and requires certain plug configurations.

Please see the Specs to determine

correct outlet configuration.

15.) Web Clutch:

 Use the Web clutch to control tension

between the main rolls and the pull

rollers. This will assist the end user in

ensuring good output.

16.) Roll Lift Handle/Gap Adjust. Handle:

 Use this Handle to select the proper

settings depending on what application

is to be used.

GBC 1264WF/1244WF Operation Manual

Section 7: Display Control Panel

Stand-by

Pressing STAND-BY will cause the

laminator to go into the AUTO-OFF mode.

The laminator will automatically go into this

mode after sitting idle for an extended

amount of time. When in AUTO-OFF mode

the laminator will no longer continue to heat

the main rollers to save power.

Stand-by

Pressing MEMORY will cause the current

speed and heat settings to be recorded in the

JOB memory location shown on the display.

Jobs

Pressing the up or down arrows will cause

the unit to cycle through stored jobs. Up to

9 separate jobs can be stored. To save a job,

select one of the nine jobs to overwrite.

Then change the heat and speed settings as

required for your application. Once

selected, press the memory button once.

Measure

Press and hold the MEASURE key to

display the current roller temperature.

Cooling

When the COOLING button is pressed the

cooling fans will turn on or off. The

COOLING button will illuminate green

when the fans are on. The fans blow fresh

air on the film web in between the heat and

pull rollers.

Run

When the RUN is pressed the rollers will

begin turning. However, pressing run will

not cause the rollers to turn when any of the

following are true: the Emergency Stop is

engaged, Safety Shield is raised or removed

and/or the feed table is removed.

GBC 1264WF/1244WF Operation Manual

Display Control Panel-Continued

Top and Bottom Temperature

Use the up or down arrow keys to increase

or decrease the set temperature of the heat

rollers. The temperature shown on the

display is the temperature at which the unit

is attempting to attain. For example if the

unit is set to 200*F even though the actual

roller temperature may be higher or lower.

To view the actual temperature press

MEASURE.

Stop

The STOP button ceases the forward

rotation of the rollers.

Reverse

Pressing the REVERSE button causes the

rollers to turn in the reverse direction. The

rollers will only turn in reverse as long as

the REVERSE button is depressed.

La pagina sta caricando ...

MyBinding Titan 1244WF Manuale utente

Questo manuale è adatto anche per

MyBinding Titan 1244WF Manuale utente

in altre lingue

Documenti correlati

Altri documenti