Moog Videolarm QView QSM75C2-70NA Installation And Operation Instructions Manual

Moog Videolarm
Marca
Moog Videolarm
Modello
QView QSM75C2-70NA
Categoria
Accessori per telecamere di sicurezza
Tipo
Installation And Operation Instructions Manual

Questo manuale è adatto anche per

Before attempting to connect or operate this product,
please read these instructions completely.
81-IN5397
01-27-2009
www.videolarm.com
QSM75C2-70NA
Vandal-Resistant Surface Mount Dome Housing with Q-View System
Installation and Operation Instructions for the following models:
QSM75C2-70NA 7” Outdoor dome Camera System, surface mount, clear dome,
2 Hi-Res Day/Night Cameras each with a 3-9mm auto-iris,
varifocal lens, plus heater/blower
IMPORTANT SAFEGUARDS SAFETY PRECAUTIONS
UNPACKING
SERVICE
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with damp cloth.
7 Do not block any of the ventilation openings. Install in accordance with the
manufacturers instructions.
8 Cable Runs- All cable runs must be within permissible distance.
9 Mounting - This unit must be properly and securely mounted to a supporting
structure capable of sustaining the weight of the unit.
Accordingly:
a. The installation should be made by a qualified installer.
b. The installation should be in compliance with local codes.
c. Care should be exercised to select suitable hardware to install the unit, taking into
account both the composition of the mounting surface and the weight of the
unit.
10 Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus ( including amplifiers) that produce heat.
11 Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade or the third
prong are provided for your safety. When the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
12 Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
13 Only use attachment/ accessories specified by the manufacturer.
14 Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer,
or sold with the apparatus. When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
15 Unplug this apparatus during lighting storms or when unused for long periods of time.
16 Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled of objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped.
Be sure to periodically examine the unit and the supporting structure to make sure that the
integrity of the installation is intact. Failure to comply with the foregoing could result in the
unit separating from the support structure and falling, with resultant damages or injury to
anyone or anything struck by the falling unit.
Unpack carefully. Electronic components can be
damaged if improperly handled or dropped. If an item
appears to have been damaged in shipment, replace
it properly in its carton and notify the shipper.
Be sure to save:
1 The shipping carton and packaging material.
They are the safest material in which to make
future shipments of the equipment.
2 These Installation and Operating Instructions.
If technical support or service is needed, contact us
at the following number:
The lightning flash with an arrowhead
symbol, within an equilateral triangle, is
intended to alert the user to the presence
of non-insulated “dangerous voltage”
within the product’s enclosure that may be
of sufficient magnitude to constitute a risk
to persons.
Este símbolo se piensa para alertar al usuario a la
presencia del “voltaje peligroso no-aisIado” dentro del
recinto de los productos que puede ser un riesgo de
choque eléctrico.
Ce symbole est prévu pour alerter I’utilisateur à la
presence “de la tension dangereuse” non-isolée dans la
clôture de produits qui peut être un risque de choc
électrique.
Dieses Symbol soll den Benutzer zum Vorhandensein der
nicht-lsolier “Gefährdungsspannung” innerhalb der
Produkteinschließung alarmieren die eine Gefahr des
elektrischen Schlages sein kann.
Este símbolo é pretendido alertar o usuário à presença
“di tensão perigosa non-isolada” dentro do cerco dos
produtos que pode ser um risco de choque elétrico.
Questo simbolo è inteso per avvertire I’utente alla
presenza “di tensione pericolosa” non-isolata all’interno
della recinzione dei prodotti che può essere un rischio di
scossa elettrica
.
The exclamation point within an equilateral
triangle is intended to alert the user to
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
Este símbolo del punto del exclamation se piensa para
alertar al usuario a la presencia de instrucciones
importantes en la literatura que acompaña la
aplicación.
Ce symbole de point d’exclamation est prévu pour
alerter l’utilisateur à la presence des instructions
importantes dans la littérature accompagnant
l’appareil.
Dieses Ausruf Punktsymbol soll den Benutzer zum
Vorhandensein de wichtigen Anweisungen in der
Literatur alarmieren, die das Gerät begleitet.
Este símbolo do ponto do exclamation é pretendido
alertar o usuário à presença de instruções importantes
na literatura que acompanha o dispositivo.
Questo simbolo del punto del exclamaton è inteso per
avvertire l’utente alla presenza delle istruzioni importanti
nella letteratura che accompagna l'apparecchio.
TECHNICAL SUPPORT
AVAILABLE 24 HOURS
1- 800 - 554 -1124
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER ( OR BACK). NO USER- SERVICE-
ABLE PARTS INSIDE. REFER SEVICING TO
QUALIFIED SERVICE PERSONNEL.
LIMITED WARRANTY
FOR VIDEOLARM INC. PRODUCTS
VIDEOLARM INC. warrants this Product to be freefrom defectsin material or workmanship,as follows:
PRODUCTCATEGORY PARTS LABOR
All Enclosures and Electronics Five (5) Years Five (5) Years
Pan/Tilts Three (3) Years **6 months if used in autoscan Three (3) Years **6 months if used in autoscan
Poles/PoleEvators Three (3) Years Three (3) Years
Warrior/Q-View/I.R. Illuminators Five (5) Years Five (5) Years
Controllers Five (5) Years Five (5) Years
Power Supplies Five (5) Years Five (5) Years
Accessory Brackets Five (5) Years Five (5) Years
During the labor warranty period, to repair the Product, Purchaser will either return the defective product, freight prepaid, or deliver it to Videolarm Inc.
Decatur GA. The Product to be repaired is to be returned in either its original carton or a similar package
an equal degree of protection with a
RMA # (Return Materials Authorization number) displayed on the outer box or packing slip. To obtain a RMA# you must contact our Technical Support
Team at 800.554.1124, extension 101. Videolarm will return the repaired Product freight prepaid to Purchaser. Videolarm is not obligated to provide
Purchaser with a substitute unit during the warranty period or at any time. After the applicable warranty period, Purchaser must pay all labor and/or
parts charges.
1.NOTIFICATIONOF CLAIMS: WARRANTYSERVICE:If Purchaser believes that the Product is defective in material or workmanship, then written notice
with an explanation of the claim shall be given promptly by Purchaser to Videolarm but all claims for warranty service must be made within the
warranty period. If after investigation Videolarm determines that the reported problem was not covered by the warranty, P
urchaser shall pay Videolarm
for the cost of investigating the problem at its then prevailing per incident billable rate. No repair or replacement of any Product or part thereof shall
extend the warranty period as to the entire Product. The
warranty on the repaired part only shall be in for a period of ninety (90) days
following the repair or replacement of that part or the remaining period of the Product parts warranty, whichever is greater.
2.EXCLUSIVE REMEDY: ACCEPTANCE:Purchaser’s exclusive remedy and Videolarm’s sole obligation is to supply (or pay for) all labor necessary to repair
any Product found to be defective within the warranty period and to supply, at no extra charge, new or rebuilt replacements for defective parts.
3.EXCEPTIONS TO LIMITED WARRANTY: Videolarm shall have no liability or obligation to Purchaser with respect to any Product requiring service
during the warranty period which is subjected to any of the following: abuse, improper use: negligence, accident, lightning damage or other acts
of God (i.e., hurricanes, earthquakes),
failure of the end-user to follow the directions outlined in the product instructions, failure of the
end-user to follow the maintenance procedures recommended by the International Security Industry Organization, written in product instructions,
or recommended in the service manual for the Product. Furthermore, Videolarm shall have no liability where a schedule is
for regular
replacement or maintenance or cleaning of certain parts (based on usage) and the end-user has failed to follow such schedule; attempted repair by
personnel; operation of the Product outside of the published environmental and electrical parameters, or if such Product’s original
(trademark, serial number) markings have been defaced, altered, or removed. Videolarm excludes from warranty coverage Products sold
AS IS and/or WITH ALL FAULTS and excludes used Products which have not been sold by Videolarm to the Purchaser. All software and accompanying
documentation furnished with, or as part of the Product is furnished “AS IS” (i.e., without any warranty of any kind), except where expressly provided
otherwise in any documentation or license agreement furnished with the Product.
4.PROOF OF PURCHASE:The Purchaser’s dated bill of sale must be retained as evidence of the date of purchase and to establish warranty eligibility.
DISCLAIMEROF WARRANTY
EXCEPT FOR THE FOREGOING WARRANTIES, VIDEOLARM HEREBY DISCLAIMS AND EXCLUDES ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO ANY AND/OR ALL IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND/OR ANY WARRANTY WITH
REGARD TO ANY CLAIM OF INFRINGEMENT THAT MAY BE PROVIDED IN SECTION 2-312(3) OF
THE UNIFORM COMMERCIAL CODE AND/OR IN ANY OTHER COMPARABLE
STATE STATUTE. VIDEOLARM HEREBY DISCLAIMS ANY REPRESENTATIONS OR WARRANTY THAT THE PRODUCT IS COMPATIBLE WITH ANY COMBINATION OF NON-VIDEOLARM
PRODUCTS OR NON-VIDEOLARM RECOMMENDED PRODUCTS PURCHASER CHOOSES TO CONNECT TO PRODUCT.
LIMITATION OF LIABILITY
THE LIABILITY OF VIDEOLARM, IF ANY, AND PURCHASER’S SOLE AND EXCLUSIVE REMEDY FOR DAMAGES FOR ANY CLAIM OF ANY KIND
WHATSOEVER, REGARDLESS OF THE LEGAL THEORY AND WHETHER ARISING IN TORT OR CONTRACT, SHALL NOT BE GREATER THAN THE ACTUAL PURCHASE PRICE OF THE
PRODUCT WITH RESPECT TO WHICH SUCH CLAIM IS MADE. IN NO EVENT SHALL VIDEOLARM BE LIABLE TO PURCHASER FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES OF ANY KIND INCLUDING, BUT NOT LIMITED TO, COMPENSATION, REIMBURSEMENT OR DAMAGES ON ACCOUNT OF THE LOSS OF PRESENT
OR PROSPECTIVE PROFITS OR FOR ANY OTHER REASON WHATSOEVER.
/tour operation
/tour operation
**6 months if used in autoscan
/tour operation
**6 months if used in autoscan
/tour operation
SView Series Five (5) Years
Five (5) Years
The limited warranty stated in these product instructions is subject to all of the following terms and conditions:
TERMS AND CONDITIONS
QSM75C2-70NA
24 VAC
Total Power: 63 Watts
Accessories: Heater: 50 Watts/Blower: 2 Watts
Camera Power: 11 Max (4 Cameras)
Tools Required: .100” Flat Head Screwdriver
Phillips Head Screwdriver
24 VAC
Energía Total: 63 vatios
Accesorios: Calentador: 50 Watts/Blower: 2 vatios
Energía De la Cámara fotográfica: 11 Max (4 Cámara)
Las Herramientas Requirieron: Destornillador Principal Plano Del 100"
Destornillador Principal Phillips
24 VCA
Puissance Totale : 63 watts
Accessoires : Réchauffeur : 50 Watts/Blower : 2 watts
Puissance D'Appareil-photo : 11 Max ( 4 Cameras)
Les Outils besoin : Tournevis Principal Plat De 100"
Tournevis Principal Phillips
24 VAC
Gesamtenergie: 63 Watt
Zusatzgeräte: Heizung: 50 Watts/Blower: 2 Watt
Kamera-Energie: 11 Max (4 Cameras)
Werkzeuge Erforderten: 100"Flacher Hauptschraubenzieher
Kreuzkopfhauptschraubenzieher
24 VAC
Poder Total: 63 watts
Acessórios: Calefator: 50 Watts/Blower: 2 watt
Poder Da Câmera: 11 Max (4 Cameras)
As Ferramentas Requereram: Chave de fenda Principal Lisa Do 100"
Chave de fenda Principal Phillips
24 VAC
Alimentazione Totale: 63 watt
Accessori: Riscaldatore: 50 Watts/Blower: 2 watt
Alimentazione Della Macchina fotografica: 11 Max (4 Cameras)
Attrezzi Richiesti: Cacciavite Capo Piano Del 100"
Cacciavite Capo "phillips"
Electrical Specifications
Power 24VAC
Class 2 Only
!!
Français
Deutsch
Italiano
Portuguese
Español
English
Contents of Box
Use Teflon Tape (included) to seal conduit plugs.
• Utilice la cinta del Teflon (incluida) para sellar los enchufes del
conducto.
• Utilisez la bande de teflon (incluse) pour sceller des prises de
conduit.
• Benutzen Sie das Teflonklebeband (eingeschlossen) um
Rohrstecker zu versiegeln.
• Use a fita adesiva do Teflon (incluída) selar plugues da
canalização.
• Utilizzi il nastro del Teflon (incluso) per sigillare le spine del
condotto.
Use teflon
tape
Wall
Mounting
WALL
WALL MOUNT
!!
Mount only to suitable material such as brick,
concrete, wood, etc. (Wall mount sold separately)
• Monte solamente al material conveniente tal como ladrillo,
concreto, madera, etc. (montaje de la pared vendido por
separado)
• Montez seulement au matériel approprié tel que la brique, le
béton, le bois, etc..(bâti de mur vendu séparément)
• Bringen Sie nur zum verwendbaren Material wie Ziegelstein, Beton,
Holz, usw. an. (Wandeinfassung separat verkauft)
• Monte somente ao material apropriado tal como o tijolo, o
concreto, a madeira, etc..(montagem da parede vendida
separada)
• Monti soltanto a materiale adatto quali il mattone, il calcestruzzo,
il legno, ecc.
Wall
Mounting
!!
Mounting surface should be capable of rigidly
holding 4(X) the weight of the entire assembly.
• La superficie de montaje debe ser capaz rígido de llevar a
cabo 4(X) al peso de la asamblea entera.
• La surface de montage devrait être capable de tenir rigide-
ment 4(X) le poids de l'assemblée entière.
• Befestigungsfläche sollte zu 4(X) das Gewicht der gesamten
Versammlung steif halten fähig sein.
• A superfície de montagem deve ser capaz rìgida de prender
4(X) o peso do conjunto inteiro.
• La superficie di montaggio dovrebbe essere capace rigidam-
ente della tenuta 4(X) il peso di intero complessivo.
Wall
Mounting
Example on using conduit for wall mount
applications.
• Ejemplo en usar el conducto para los usos del montaje de la
pared.
• Exemple sur utiliser le conduit pour des applications de bâti de
mur.
• Beispiel auf dem Verwenden des Rohres für Wandeinfassung
Anwendungen.
• Exemplo em usar a canalização para aplicações da
montagem da parede.
• Esempio sul per mezzo del condotto per le applicazioni del
supporto della parete.
Wall
Mounting
2
1
3
4
!!
Surface
Mounting
Remove the (4) side plates . Mounting Surface
should be of suitable material such as brick,
concrete, wood etc.
• Quite (4) las placas laterales usando la herramienta de la seguridad
proporcionada. La superficie de montaje debe estar de material
conveniente tal como ladrillo, concreto, madera etc.
• Enlevez (4) les plats latéraux à l'aide de l'outil de sécurité fourni. La
surface de montage devrait être de matériel approprié tel que la
brique, le béton, le bois etc...
• Entfernen Sie die (4) seitlichen Platten mit dem bereitgestellten
Sicherheit Werkzeug. Befestigungsfläche sollte vom verwendbaren
Material wie Ziegelstein, Beton, Holz usw. sein.
• Remova (4) as placas laterais usando a ferramenta da segurança
fornecida. A superfície de montagem deve ser do material apropriado
tal como o tijolo, o concreto, a madeira etc..
• Rimuova (4) le piastre laterali per mezzo dell'attrezzo di sicurezza fornito.
La superficie di montaggio dovrebbe essere di materiale adatto quali il
mattone, il calcestruzzo, il legno ecc.
Surface
Mounting
Securely mount housing to mounting surface. Replace
side plates when complete.
• Con seguridad montaje que contiene a la superficie de
montaje. Substituya las placas laterales cuando es completo.
• Solidement bâti logeant sur la surface de montage.
Remplacez les plats latéraux si complet.
• Sicher Einfassung, die zur Befestigungsfläche unterbringt.
Ersetzen Sie seitliche Platten, wenn komplett.
• Firmemente montagem que abriga à superfície de monta-
gem. Substitua placas laterais quando completo.
• Saldamente supporto che alloggia alla superficie di montag-
gio. Sostituisca le piastre laterali una volta completo.
Surface
Mounting
To connect conduit, remove conduit cover from side of
housing.
• Para conectar el conducto, quite la cubierta del conducto
del lado de la cubierta.
• Pour relier le conduit, enlevez la couverture de conduit du
côté du logement.
• Um Rohr anzuschließen, entfernen Sie Rohrabdeckung von der
Seite des Gehäuses.
• Para conectar a canalização, remova a tampa da
canalização do lado da carcaça.
• Per collegare il condotto, rimuova la copertura del condotto
dal lato di alloggiamento.
Remove Cover
6
5
7
8
VIDEO
24VAC
1
2
3
4
Camera
Camera
Heater/Blower
Heater/Blower
Red
Orange
Yellow
Green
POWER
11 Watts
52 Watts
1/0
1
2
3
4
Alarm 1
Alarm 2
Alarm 3
Common
Blue
Violet
Gray
White
24 VAC POWER
Make the appropriate male and female connections.
• Haga las conexiones masculinas y femeninas apropiadas.
• Établissez les rapports masculins et femelles appropriés.
• Stellen Sie die passenden männlichen und weiblichen Beziehungen her.
• Faça as conexões masculinas e fêmeas apropriadas.
• Faccia i collegamenti maschii e femminili adatti.
GROUND
4 VIDEO
4
MM
2
AWG
,5 ,75 1,0 1,5 2,5 4 6
22 20 18 16 14 12 10
The beam angle may be adjusted on the
bottom of the unit.
• Éstos se recomiendan las distancias máximas para
24VAC con una gota del voltage del 10%.
• Ceux-ci sont recommandés des distances maximum
pour 24VAC avec une chute de tension de 10%.
• Diese werden maximale Abstände für 24VAC mit
einem 10% Spannungsabfall empfohlen.
• Estes são recomendados distâncias máximas para
24VAC com uma queda de tensão de 10%.
• Questi sono suggeriti distanze massime per 24VAC
con una differenza de potenziale di 10%.
12
These are recommended maximum distances
for 24VAC with a 10% voltage drop.
9
10
11
Use the rubber seal when mounting housing
up right. Center the seal over the dome.
• Utilice el sello de goma al montar contener encima de la
derecha. Centre el sello sobre la bóveda.
• Utilisez le joint en caoutchouc en montant loger vers le haut de
la droite. Centrez le joint au-dessus du dôme.
• Benutzen Sie die Gummidichtung, wenn Sie die Unterbringung
herauf Recht anbringen. Zentrieren Sie die Dichtung über der
Haube.
• Use o selo de borracha ao montar abrigar acima da direita.
Centre o selo sobre a abóbada.
• Utilizzi la guarnizione di gomma quando montano l'alloggio
sulla destra. Concentrisi la guarnizione sopra la cupola.
Pull the seal over the face of the dome and
down onto the housing.
• Tire del sello sobre la cara de la bóveda y abajo sobre la
cubierta.
• Tirez le joint au-dessus du visage du dôme et vers le bas sur le
logement.
• Ziehen Sie die Dichtung über dem Gesicht der Haube und
unten auf das Gehäuse.
• Puxe o selo sobre a cara da abóbada e para baixo na
carcaça.
• Tiri la guarnizione sopra la faccia della cupola e giù
sull'alloggiamento.
Push seal edge up against dome and housing
surfaces.
• Empuje el borde del sello para arriba contra superficies de la
bóveda y de la cubierta.
• Poussez le bord de joint vers le haut contre des surfaces de
dôme et de logement.
• Drücken Sie Dichtung Rand oben gegen Haube- und
Gehäuseoberflächen.
• Empurre a borda do selo acima de encontro às superfícies da
abóbada e da carcaça.
• Spinga il bordo della guarnizione in su contro le superfici
dell'alloggiamento e della cupola.
Make sure there are NO GAPS or EDGES between
the seal edge and the dome’s surface.
• Cerciórese de que no haya BOQUETES o BORDES entre el
borde del sello y la superficie de la bóveda.
• Assurez-vous qu'il n'y a AUCUNE LACUNE ou BORD entre le
bord de joint et la surface du dôme.
• Stellen Sie sicher, daß es KEINE ABSTÄNDE oder RÄNDER
zwischen dem Dichtung Rand und der Oberfläche der Haube
gibt.
• Certifique-se que não há NENHUMA ABERTURA ou BORDA
entre a borda do selo e a superfície da abóbada.
• Assicurisi che non ci sono LACUNE o BORDI fra il bordo della
guarnizione e la superficie della cupola.
12
11
13
14
QSM75C2-70NA
Replacement Parts List
(2)
1
2
4
5
7
6
3
12
14
11
13
10
9
8
15
Wall Mount
WMSM7
Sold Separately
Part Number Description
1 RPSM7501 DOME SEAL
2 RPRH7502 LOWER TRIM RING
3 RC7T TINTED REPLACEMENT CAPSULE
RC7C CLEAR REPLACEMENT CAPSULE
4 RPRH7503 DOME CLAMPING BRACKET
5 NA (WITH THIS PRODUCT)
6 RPFD080 (12VDC) BLOWER (USED IN 24V HGS)
7 RPFD072 24VAC HEATER
8 NA (WITH THIS PRODUCT)
9 NA (WITH THIS PRODUCT)
10
RPFD050 (Model SM7HB)
RPRH706 (Model SM7FHB)
RPRH707 (Model SM7NHB)
CONNECTION PCB
CONNECTION PCB (FIXED MODELS)
CONNECTION PCB (NETWORK MODELS)
11 RPSM7511 HOUSING TOP
12 RPSM7512 MOUNTING HOLE CLOSURE
13 RPSM7513 CONDUIT HOLE CLOSURE
14 WMSM7 (Sold Separately) WALL MOUNT BRACKET (Sold Separately)
15 RPSM75040 HOUSING HARDWARE
16 RP46PKH2094 HOUSING HARDWARE PACKET A
17
18
N/S RPPKE1125 ELECTRICAL PACKET, HB, FIXED NETWORK
15
!
Be sure the bracket is properly and
securely mounted to a supporting
structure capable of rigidly holding
the weight of the entire unit.
16
(8)
(4)
(4)
(1)
(1)
RP46PKH3063 (INCLUDED IN RP46PKH2094)
SPACER PACKET
Product Registration/Warranty
Thank you for choosing Videolarm. We value your patronage and are solely committed to
providing you with only the highest quality products available with unmatched customer service
levels that are second-to-none in the security industry.
Should a problem arise, rest assure that Videolarm stands behind its products
by offering some of the most impressive warranty plans available: 3 Years
on all Housings, Poles, Power Supplies, and Accessories and 5 Years on
all camera systems (SView, QView, Warriors), and InfraRed Illuminators.
Register Your Products
Option 1: Online Option 2: Mail-In
Take a few moments and validate your purchase with our Online Product Registration Form
at
www.videolarm.com/productregistration.jsp
or complete and mail-in the bottom portion of this flyer.
Register your recent Videolarm purchases and benefit from the following:
Simple and Trouble-Free RMA process•
Added into customer database to receive product updates / news•
Eliminate the need to archive original purchase documents: •
Receipts, Purchase Orders, etc…
Main Contact Info
First Name: Last Name:
Professional Title: Company:
Address 1: Address 2:
City: State / Province/Country:
Zip / Postal Code: Phone Number: E-mail Address:
Product Information
Please Circle One: Business Personal
Name & Location of Company / Store where Purchased:
(City, State, Country)
Videolarm Product ID Product Description
Serial #
(Available only for Camera Systems, IR Illuminators, Wireless Devices)
PO#
Cut at the dotted Line
Place in envelope, affix stamp and mail to: Videolarm ATTN: Warranty
2525 Park Central Ave.
Decatur, GA 30035
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14

Moog Videolarm QView QSM75C2-70NA Installation And Operation Instructions Manual

Moog Videolarm
Marca
Moog Videolarm
Modello
QView QSM75C2-70NA
Categoria
Accessori per telecamere di sicurezza
Tipo
Installation And Operation Instructions Manual
Questo manuale è adatto anche per
Scarica il pdf
rapporto

in altre lingue

Documenti correlati