Moog Videolarm IRHW75CF2N Installation And Operation Instructions Manual

Categoria
Accessori per telecamere di sicurezza
Tipo
Installation And Operation Instructions Manual

Questo manuale è adatto anche per

TM
Before attempting to connect or operate this product,
please read these instructions completely.
81-IN5377R0
www.videolarm.com
RHW75CF2N / IRHW75CF2N
Outdoor/Indoor Dome Housing Brackets and Mounts
Installation and Operation Instructions for the following models:
RHW75CF2N IP Network Ready 7” Vandal-Resistant Outdoor dome housing with wall
mount, rugged cast aluminum top and polycarbonate clear dome, with
24Vac input, heater/blower, for an IP Network fixed camera, 120 to 24Vac
transformer
RHW75TF2N IP Network Ready 7” Vandal-Resistant Outdoor dome housing with wall
mount, rugged cast aluminum top and polycarbonate tinted dome, with
24Vac input, heater/blower, for an IP Network fixed camera, 120 to 24Vac
transformer
IRHW75CF2N IP Network Ready 7” Vandal-Resistant Indoor dome housing with wall
mount, rugged cast aluminum top and polycarbonate clear dome, with
24Vac input, heater/blower, for an IP Network fixed camera, 120 to 24Vac
transformer
IMPORTANT SAFEGUARDS SAFETY PRECAUTIONS
UNPACKING
SERVICE
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with damp cloth.
7 Do not block any of the ventilation openings. Install in accordance with the
manufacturers instructions.
8 Cable Runs- All cable runs must be within permissible distance.
9 Mounting - This unit must be properly and securely mounted to a supporting
structure capable of sustaining the weight of the unit.
Accordingly:
a. The installation should be made by a qualified installer.
b. The installation should be in compliance with local codes.
c. Care should be exercised to select suitable hardware to install the unit, taking into
account both the composition of the mounting surface and the weight of the
unit.
10 Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus ( including amplifiers) that produce heat.
11 Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade or the third
prong are provided for your safety. When the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
12 Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
13 Only use attachment/ accessories specified by the manufacturer.
14 Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer,
or sold with the apparatus. When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
15 Unplug this apparatus during lighting storms or when unused for long periods of time.
16 Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled of objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped.
Be sure to periodically examine the unit and the supporting structure to make sure that the
integrity of the installation is intact. Failure to comply with the foregoing could result in the
unit separating from the support structure and falling, with resultant damages or injury to
anyone or anything struck by the falling unit.
Unpack carefully. Electronic components can be
damaged if improperly handled or dropped. If an item
appears to have been damaged in shipment, replace
it properly in its carton and notify the shipper.
Be sure to save:
1 The shipping carton and packaging material.
They are the safest material in which to make
future shipments of the equipment.
2 These Installation and Operating Instructions.
If technical support or service is needed, contact us
at the following number:
The lightning flash with an arrowhead
symbol, within an equilateral triangle, is
intended to alert the user to the presence
of non-insulated “dangerous voltage”
within the product’s enclosure that may be
of sufficient magnitude to constitute a risk
to persons.
Este símbolo se piensa para alertar al usuario a la
presencia del “voltaje peligroso no-aisIado” dentro del
recinto de los productos que puede ser un riesgo de
choque eléctrico.
Ce symbole est prévu pour alerter I’utilisateur à la
presence “de la tension dangereuse” non-isolée dans la
clôture de produits qui peut être un risque de choc
électrique.
Dieses Symbol soll den Benutzer zum Vorhandensein der
nicht-lsolier “Gefährdungsspannung” innerhalb der
Produkteinschließung alarmieren die eine Gefahr des
elektrischen Schlages sein kann.
Este símbolo é pretendido alertar o usuário à presença
“di tensão perigosa non-isolada” dentro do cerco dos
produtos que pode ser um risco de choque elétrico.
Questo simbolo è inteso per avvertire I’utente alla
presenza “di tensione pericolosa” non-isolata all’interno
della recinzione dei prodotti che può essere un rischio di
scossa elettrica
.
The exclamation point within an equilateral
triangle is intended to alert the user to
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
Este símbolo del punto del exclamation se piensa para
alertar al usuario a la presencia de instrucciones
importantes en la literatura que acompaña la
aplicación.
Ce symbole de point d’exclamation est prévu pour
alerter l’utilisateur à la presence des instructions
importantes dans la littérature accompagnant
l’appareil.
Dieses Ausruf Punktsymbol soll den Benutzer zum
Vorhandensein de wichtigen Anweisungen in der
Literatur alarmieren, die das Gerät begleitet.
Este símbolo do ponto do exclamation é pretendido
alertar o usuário à presença de instruções importantes
na literatura que acompanha o dispositivo.
Questo simbolo del punto del exclamaton è inteso per
avvertire l’utente alla presenza delle istruzioni importanti
nella letteratura che accompagna l'apparecchio.
TECHNICAL SUPPORT
AVAILABLE 24 HOURS
1- 800 - 554 -1124
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER ( OR BACK). NO USER- SERVICE-
ABLE PARTS INSIDE. REFER SEVICING TO
QUALIFIED SERVICE PERSONNEL.
LIMITED WARRANTY
FOR VIDEOLARM INC. PRODUCTS
VIDEOLARM INC. warrants this Product to be free from defects in material or workmanship, as follows:
PRODUCT CATEGORY PARTS LABOR
All Enclosures and Electronics Three (3) Years Three (3) Years
Pan/Tilts Three (3) Years **6 months if used in autoscan Three (3) Years **6 months if used in autoscan
Poles/PoleEvators Three (3) Years Three (3) Years
Warrior/Q-View/I.R. Illuminators/SView Five (5) Years Five (5) Years
Controllers Three (3) Years Three (3) Years
Power Supplies Three (3) Years Three (3) Years
Accessory Brackets Three (3) Years Three (3) Years
During the labor warranty period, to repair the Product, Purchaser will either return the defective product, freight prepaid, or deliver it to Videolarm Inc.
Decatur GA. The Product to be repaired is to be returned in either its original carton or
a similar package an equal degree of protection with a
RMA # (Return Materials Authorization number) displayed on the outer box or packing slip. To obtain a RMA# you must contact our Technical Support
Team at 800.554.1124, extension 101. Videolarm will return the repaired Product freight prepaid to Purchaser. Videolarm is not obligated to provide
Purchaser with a substitute unit during the warranty period or at any time. After the applicable warranty period, Purchaser must pay all labor and/or
parts charges.
The limited warranty stated in these product instructions is subject to all of the following terms and conditions:
1. NOTIFICATION OF CLAIMS: WARRANTY SERVICE: If Purchaser believes that the Product is defective in material or workmanship, then written notice
with an explanation of the claim shall be given promptly by Purchaser to Videolarm but all claims for warranty service must be made within the
warranty period. If after
investigation Videolarm determines that the reported problem was not covered by the warranty, Purchaser shall pay Videolarm
for the cost of investigating the problem at its then prevailing per incident billable rate. No repair or replacement of any Product or part thereof shall
extend the warranty period as to the entire Product. The
warranty on the repaired part only shall be in for a period of ninety (90) days
following the repair or replacement of that part or the remaining period of the Product parts warranty, whichever is greater.
2. EXCLUSIVE REMEDY: ACCEPTANCE: Purchaser’s exclusive remedy and Videolarms sole obligation is to supply (or pay for) all labor necessary to repair
any Product found to be defective within the warranty period and to supply, at no extra charge, new or rebuilt replacements for defective parts.
3. EXCEPTIONS TO LIMITED WARRANTY: Videolarm shall have no liability or obligation to Purchaser with respect to any Product requiring service
during the warranty period which is subjected to any of the following: abuse, improper use: negligence, accident, lightning damage or other acts
of God (i.e., hurricanes, earthquakes),
failure of the end-user to follow the directions outlined in the product instructions, failure of the
end-user to follow the maintenance procedures recommended by the International Security Industry Organization, written in product instructions,
or recommended in the service manual for the Product. Furthermore, Videolarm shall have no liability where a schedule is
for regular
replacement or maintenance or cleaning of certain parts (based on usage) and the end-user has failed to follow such schedule; attempted repair by
personnel; operation of the Product outside of the published environmental and electrical parameters, or if such Product’s original
(trademark, serial number) markings have been defaced, altered, or removed. Videolarm excludes from warranty coverage Products sold
AS IS and/or WITH ALL FAULTS and excludes used Products which have not been sold by Videolarm to the Purchaser. All software and accompanying
documentation furnished with, or as part of the Product is furnished AS IS” (i.e., without any warranty of any kind), except where expressly provided
otherwise in any documentation or license agreement furnished with the Product.
4. PROOF OF PURCHASE: The Purchaser’s dated bill of sale must be retained as evidence of the date of purchase and to establish warranty eligibility.
DISCLAIMER OF WARRANTY EXCEPT FOR THE FOREGOING WARRANTIES, VIDEOLARM HEREBY DISCLAIMS AND EXCLUDES ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO ANY AND/OR ALL IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND/OR ANY WARRANTY WITH
REGARD TO ANY CLAIM OF INFRINGEMENT THAT MAY BE PROVIDED IN SECTION 2-312(3) OF
THE UNIFORM COMMERCIAL CODE AND/OR IN ANY OTHER COMPARABLE
STATE STATUTE. VIDEOLARM HEREBY DISCLAIMS ANY REPRESENTATIONS OR WARRANTY THAT THE PRODUCT IS COMPATIBLE WITH ANY COMBINATION OF NON-VIDEOLARM
PRODUCTS OR NON-VIDEOLARM RECOMMENDED PRODUCTS PURCHASER CHOOSES TO CONNECT TO PRODUCT.
LIMITATION OF LIABILITY THE LIABILITY OF VIDEOLARM, IF ANY, AND PURCHASER’S SOLE AND EXCLUSIVE REMEDY FOR DAMAGES FOR ANY CLAIM OF ANY KIND
WHATSOEVER, REGARDLESS OF THE LEGAL THEORY AND WHETHER ARISING IN TORT OR CONTRACT, SHALL NOT BE GREATER THAN THE ACTUAL PURCHASE PRICE OF
Content of Box
RHW75CF2N (Outdoor Only)
IRHW75CF2N (Indoor Only)
Power 24VAC
Class 2 Only
Total Power: 79 Watts
Heater: 50 Watts Blower: 2 Watts
Camera Power: 27 Watts
Input Connectors (Outdoor Units):
(1) BNC (Analog Video)
(2) Screw-Down Connectors (Power/Alarms)
(1) RJ45 (Data)
Energía Total: 79 vatios
Calentador: 50 vatios Soplador: 2 vatios
Energía De la Cámara fotográfica: 27 vatios
Conectadores De la Entrada (Unidades Al aire libre):
(1) BNC (Vídeo Análogo)
(2) Conectadores Del Tornillo-Abajo (Power/Alarms)
(1) RJ45 (datos)
Tools Required: .100” Flat Head Screwdriver
Phillips Head Screwdriver
25 vatios en 24 VAC (cámara fotográfica solamente)
Ningunos Conectadores De la Entrada: Todo el cableado
debe ser funcionado directamente a la cámara fotográfica
Las Herramientas Requirieron: Destornillador Principal Plano Del 100"
Destornillador Principal Phillips
!!
Electrical Specifications
25 Watts at 24 VAC (Camera Only)
No Input Connectors: All wiring is to be
run directly to the camera
Puissance Totale : 79 watts
Réchauffeur : 50 watts Ventilateur : 2 watts
Puissance D'Appareil-photo : 27 watts
Connecteurs D'Entrée (Unités Extérieures):
(1) BNC (Vidéo Analogue)
(2) Connecteurs De Vis-Vers le bas (Power/Alarms)
(1) RJ45 (données)
Gesamtenergie: 79 Watt
Heizung: 50 Watt Gebläse: 2 Watt
Kamera-Energie: 27 Watt
Eingang Stecker (Im Freienmaßeinheiten):
(1) BNC (Analoger Bildschirm)
(2) Schraube-Unten Stecker (Power/Alarms)
(1) RJ45 (Daten)
Poder Total: 79 watts
Calefator: 50 watts Ventilador: 2 watt
Poder Da Câmera: 27 watts
Conectores Da Entrada (Unidades Ao ar livre):
(1) BNC (Vídeo Análogo)
(2) Conectores Do Parafuso-Para baixo (Power/Alarms)
(1) RJ45 (dados)
Alimentazione Totale: 79 watt
Riscaldatore: 50 watt Ventilatore: 2 watt
Alimentazione Della Macchina fotografica: 27 watt
Connettori Dell'Input (Unità Esterne):
(1) BNC (Video Analog)
(2) Connettori Della Vite-Giù (Power/Alarms)
(1) RJ45 (dati)
25 watts à 24 VCA (appareil-photo seulement)
Aucuns Connecteurs D'Entrée : Tout le câblage doit être couru
directement à l'appareil-photo
Les Outils Ont exigé : Tournevis Principal Plat De 100"
Tournevis Principal Phillips
25 Watt bei 24 VAC (nur Kamera)
Keine Eingang Stecker: Alle Verdrahtung soll direkt zur
Kamera gelaufen werden
Werkzeuge Erforderten: 100"Flacher Hauptschraubenzieher
Kreuzkopfhauptschraubenzieher
25 watts em 24 VAC (câmera somente)
Nenhuns Conectores Da Entrada: Toda a fiação deve ser
funcionada diretamente à câmera
As Ferramentas Requereram: Chave de fenda Principal Lisa Do 100"
Chave de fenda Principal Phillips
25 watt a 24 VCA (macchina fotografica soltanto)
Nessun Connettori Dell'Input: Tutti i collegamenti devono essere
fatti funzionare direttamente alla macchina fotografica
Attrezzi Richiesti: Cacciavite Capo Piano Del 100"
Cacciavite Capo "phillips"
Français
Deutsch
Italiano
Portuguese
Español
English
Français
Deutsch
Italiano
Portuguese
Español
English
Securely mount unit to wall or to appropriate
adapter bracket.
Monte con seguridad la unidad a la pared o al
soporte apropiado del adaptador.
Montez solidement l'unité au mur ou à la parenthèse
appropriée d'adapteur.
Bringen Sie sicher Maßeinheit zur Wand oder zum
passenden Adapterhaltewinkel an.
Monte firmemente a unidade à parede ou ao suporte
apropriado do adaptador.
Monti saldamente l'unità alla parete o alla staffa
adatta dell'adattatore.
If using conduit connect, connect to
incoming conduit fitting.
Si usa el conducto conecte, conecte con la guar-
nición entrante del conducto.
Si à l'aide du conduit reliez, reliez à l'ajustage de
précision entrant de conduit.
Wenn Sie Rohr verwenden, schließen Sie an, schließen
Sie an ankommende Rohrbefestigung an.
Se usando a canalização conecte, conecte ao
encaixe entrante da canalização.
Se per mezzo del condotto colleghi, colleghi al mon-
taggio ricevuto del condotto.
Open access door to access power and
control connectors.
Abra la puerta de acceso en los conectadores de la
energía y de control del acceso.
Ouvrez la porte d'accès aux connecteurs de
puissance et de commande d'accès.
Öffnen Sie Zugang zur Zugang Energie und zu den
Geräteanschlüssen.
Abra a porta de acesso aos conectores do poder e
de controle do acesso.
Apra il portello di accesso ai connettori di alimentazi-
one e di controllo di accesso.
Make wire connection as they are required
for your needs.
Haga la conexión del alambre como se requieren
para sus necesidades.
Établissez le rapport de fil comme ils sont exigés pour
vos besoins.
Stellen Sie Leitung Beziehung her, wie sie für Ihre
Notwendigkeiten angefordert werden.
Faça a conexão do fio como são requeridos para suas
necessidades.
Faccia il collegamento del legare come sono richiesti
per i vostri bisogni.
1
2
4
3
1
Securely mount bracket to wall. Pull wiring
through bracket and position grommet as shown.
Con seguridad soporte del montaje a emparedar. Tire del cableado
a través del soporte y del ojal de la posición según lo demostrado.
Solidement parenthèse de bâti à murer. Tirez le câblage par la
parenthèse et le canon isolant de position comme montré.
Sicher Einfassung Haltewinkel wall. Ziehen Sie Verdrahtung durch
Haltewinkel und Position Gummimuffe, wie gezeigt.
Firmemente suporte da montagem a wall. Puxe a fiação através do
suporte e do ilhó da posição como mostrado.
Saldamente staffa del supporto da wall. Tiri i collegamenti tramite la
staffa ed il gommino di protezione di posizione come indicato.
4
Screw the (2) bolts into the coupling.
Atornille (2) los pernos en el acoplador.
Vissez (2) les boulons dans l'accouplement.
Schrauben Sie die (2) Schraubbolzen in die Koppe-
lung.
Parafuse (2) os parafusos no acoplamento.
Avviti (2) i bulloni nell'accoppiamento.
2
Wrap Teflon tape around the pipe threads
to ensure a tight seal.
La cinta del Teflon del abrigo alrededor de la pipa rosca
para asegurar un sello apretado.
La bande de teflon d'enveloppe autour de la pipe filète
pour assurer un joint serré.
Verpackung Teflonklebeband um das Rohr verlegt, um
eine feste Dichtung sicherzustellen.
A fita adesiva do Teflon do envoltório em torno da
tubulação enfía para assegurar um selo apertado.
Il nastro del Teflon dell'involucro intorno al tubo filetta per
accertare una guarnizione stretta.
TM
5
6
8
7
5
Loop the lanyard over the set screw to
temporarily hold housing.
Coloque el acollador sobre el tornillo de presión para
celebrar temporalmente la cubierta.
Faites une boucle la lanière au-dessus de la vis de réglage
pour tenir temporairement le logement.
Schlingen Sie die Abzuglinie über der Klemmschraube, um
Gehäuse vorübergehend zu halten.
Dê laços no colhedor sobre o parafuso de fixação para
prender temporariamente a carcaça.
Colleghi la cordicella in circuito sopra la vite di arresto
temporaneamente per tenere l'alloggiamento.
6
Make the appropriate wiring connections
from the dome to the gooseneck.
Haga las conexiones apropiadas del cableado de la bóveda
al gooseneck.
Établissez les rapports appropriés de câblage à partir du dôme
au col de cygne.
Stellen Sie die passenden Verdrahtung Beziehungen von der
Haube zum gooseneck her.
Faça as conexões apropriadas da fiação da abóbada ao
gooseneck.
Faccia i collegamenti adatti dei collegamenti dalla cupola al
gooseneck.
7
Undo the lanyard, pull housing up and twist
secure with the locking bolt and washers.
Deshaga el acollador, tire de contener para arriba y tuerza seguro
con el perno y las arandelas de fijación.
Défaites la lanière, tirez loger vers le haut et tordez bloqué avec le
boulon et les rondelles de fermeture.
Annulieren Sie die Abzuglinie, ziehen Sie oben unterbringen und
verdrehen Sie sicheres mit dem verriegelnschraubbolzen und den
Unterlegscheiben.
Undo o colhedor, puxe abrigar acima e torça seguro com o
parafuso e as arruelas travando.
Undo la cordicella, tiri l'alloggio in su e torca sicuro con il bullone e
le rondelle di bloccaggio.
8
Slide the grommet down over the coupling to prevent
water from entering and complete the assembly.
Resbale el ojal abajo sobre el acoplador para evitar que el agua
entre y para terminar a la asamblea.
Glissez le canon isolant vers le bas au-dessus de l'accouplement
pour empêcher l'eau d'entrer et pour accomplir l'assemblée.
Schieben Sie die Gummimuffe unten über der Koppelung, um zu
verhindern, daß Wasser und die Versammlung durchzuführen
hereinkommt.
Deslize o ilhó para baixo sobre o acoplamento para impedir que a
água entre e para terminar o conjunto.
Faccia scorrere il gommino di protezione giù sopra l'accoppiamento
per impedire l'acqua entrare e per completare il complessivo.
9
10
12
11
RJ45
BNC
24VAC
1
2
3
4
Camera
Camera
Heater/Blower
Heater/Blower
Red
Orange
Yellow
Green
POWER
27 Watts
52 Watts
1/0
1
2
3
4
Alarm 1
Alarm 2
Alarm 3
Common
Blue
Violet
Gray
White
Make the appropriate male and female connections. Indoor model does not include pre-run cables.
Haga las conexiones masculinas y femeninas apropiadas. El modelo de interior no incluye pre-funciona los cables.
Établissez les rapports masculins et femelles appropriés. Le modèle d'intérieur n'inclut pas pré-courent des câbles.
Stellen Sie die passenden männlichen und weiblichen Beziehungen her. Innenmodell schließt nicht vor-laufen lassen Kabel
ein.
Faça as conexões masculinas e fêmeas apropriadas. O modelo indoor não inclui pre-funciona cabos.
Faccia i collegamenti maschii e femminili adatti. Il modello dell'interno non include pre-fa funzionare i cavi.
13
1 12VDC+ Red
2 12VDC- Black
12VDC Power leads RM7F2N
WIRING INSIDE HOUSING
Camera power supply
DC power for camera
(red & black wires)
The beam angle may be adjusted on the
bottom of the unit.
Instale la cámara fotográfica en el soporte fijo y termine
todos los usos del cableado.
Installez l'appareil-photo sur la parenthèse fixe et accom-
plissez toutes les applications de câblage.
Bringen Sie die Kamera am örtlich festgelegten Haltewin-
kel an und führen Sie alle Verdrahtung Anwendungen
durch.
Instale a câmera no suporte fixo e termine todas as
aplicações da fiação.
Installi la macchina fotografica sulla staffa fissa e completi
tutte le applicazioni dei collegamenti.
Install the camera on the fixed bracket and
complete all wiring applications.
MM
AWG
2
,5 ,75 1,0 1,5 2,5 4 6
22 20 18 16 14 12 10
These are recommended maximum distances
for 24VAC with a 10% voltage drop.
Éstos se recomiendan las distancias máximas para
24VAC con una caída de voltaje del 10%.
Ceux-ci sont recommandés des distances maximum
pour 24VAC avec une chute de tension de 10%.
Diese werden maximale Abstände für 24VAC mit
einem 10% Spannungsabfall empfohlen.
Estes são recomendados distâncias máximas para
24VAC com uma queda de tensão de 10%.
Questi sono suggeriti distanze massime per 24VAC con
una differenza de potenziale di 10%.
14
15
Tab
Connect Lanyard to trim ring assembly.
Conecte el acollador con el montaje del anillo del
ajuste.
Reliez la lanière à l'anneau d'équilibre.
Schließen Sie Abzuglinie an Ordnung Ring an.
Conecte o colhedor ao conjunto do anel da
guarnição.
Colleghi la cordicella al complessivo dell'anello
della cornice.

Align the arrows on the outside of the dome
and lock.
Alinee las flechas en el exterior de la bóveda y
trábese.
Alignez les flèches sur l'extérieur du dôme et
fermez à clef.
Richten Sie die Pfeile auf der Außenseite der
Haube aus und verriegeln Sie sich.
Alinhe as setas na parte externa da abóbada e
trave-as.
Allinei le frecce sulla parte esterna della cupola e
blocchi.
Fasten down the dome with a Phillips screwdriver.
Sujete abajo de la bóveda con un destornillador Phillips.
Attachez en bas du dôme avec un tournevis Phillips.
Befestigen Sie sich hinunter die Haube mit einem Kreuzkopf-
schraubenzieher.
Prenda abaixo a abóbada com uma chave de fenda Phillips.
Fissisi giù la cupola con un cacciavite "phillips".
Wipe the dome clean.
Limpie la bóveda limpia.
Essuyez le dôme.
Wischen Sie die Haube sauber ab.
Limpe a abóbada limpa.
Asciughi la cupola.
16
17
19
18
Replacement Parts List
RHW75CF2N
13
14
6
8
11
1
9
10
7
4
5
2
3
12
17
(1)
(1)
(2)
Part Description
1
2
3a
3b
4
5
6
7
8
9
10
11
12
13
14
17
N/S
N/S
N/S
RPRH7502
RPRH7503
RC7T
RC7C
RPFD072
RPFD080
RPRH707
(Model RH7NHB)
RPRH708
RPFD040
RPRH709
RPFD2612
WM10
RPRH713
SD0170
SD0180
RPPKE1100
RPPKH2100
RPPKE1125
RPTRANS100
LOWER TRIM RING
DOME CLAMPING
BRACKET
TINTED REPLACEMENT
CAPSULE
CLEAR REPLACEMENT
CAPSULE
24 VAC HEATER
(12 VDC) BLOWER (USED
IN 24V HOUSING)
CONNECTION PCB
(NETWORK MODELS)
CAMERA BRACKET
UPPER BRACKET
ASSEMBLY
HOUSING TOP
HOUSING TOP-GASKET
WM10 WALL MOUNT
FIXED CAMERA BRACKET
PENDANT HOUSING
COUPLING
QUICK RELEASE PIPE
COUPLING
ELECTRICAL PACKET
HOUSING HARDWARE
PACKET C- SECURITY
SCREWS
ELECTRICALPACKET,HB,
FIXED NETWORK
96VA TRANSFORMER
IRHW75CF2N
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10

Moog Videolarm IRHW75CF2N Installation And Operation Instructions Manual

Categoria
Accessori per telecamere di sicurezza
Tipo
Installation And Operation Instructions Manual
Questo manuale è adatto anche per

in altre lingue