Candy CDB 754DN/1-80 Manuale utente

Marca: Candy

Modello: CDB 754DN/1-80

Categoria: Lavatrici

Tipo: Manuale utente

Questo manuale è adatto anche per

CDB 754DN

Washer Dryer Instructions for use

CDB 854 D

CDB 754 DN

Introduction

Please read these instructions for use carefully and all other information

enclosed with the washing machine.

Keep all documentation in a safe place for future reference or for any

future owners.

This appliances is intended to be used in household and

similar applications such as:

- staff kitchen areas in shops, offices and other working environments;

- farm houses;

- by clients in hotels, motels and other residential type environments;

- bed and breakfast type environments.

A different use of this appliance from household environment or from typical housekeeping

functions, as commercial use by expert or trained users, is excluded even in the above

applications.

If the appliance is used in a manner inconsistent with this it may reduce the life of the

appliance and may void the manufacturer’s warranty.

Any damage to the appliance or other damage or loss arising through use that is not

consistent with domestic or household use (even if located in a domestic or household

environment) shall not be accepted by the manufacturer to the fullest extent permitted by law.

Notes on disposal

All packaging material used is environmentally-friendly and recyclable. Please help dispose of

the packaging via environmentally-friendly means.

Your supplier or local council will be able to give you

details of current means of disposal.

Valuable materials can be salvaged from an old appliance via scrap reprocessing.

Note: pull out the mains plug from any old appliance.

Cut the power cable and dispose of it, together with the

plug.

When disposing of an old washing machine, please ensure that the door lock is rendered

inoperable to prevent children shutting themselves in the appliance.

egaPstnetnoC

2noitcudortnI

4seton yreviled lareneG

4seton ytefaS

Quick start 5

6slortnoc fo noitpircseD

41elbaT emmargorP

61rotcele

s emmargorP

91 reward tnegreteD

02esu ot stnuoma dna sdia gnihsaw ,stnegreteD

22resu eht rof ecivda lufesU

32hsaw niam ehT

Drying 25

62elcyc gniyrd/gnihsaw citamotuA

72elcyc gniyrD

92ecnanetniam enituor dna gninaelC

snoitcnuflam gnitagitsevnI

23atad lacinhceT

Setting up + installation 33

BEFORE SWITCHING ON THE APPLIANCE MAKE SURE

IT IS CORRECTLY INSTALLED AND THAT THE TRANSIT

SCREWS ARE REMOVED AS SHOWN IN PAGE 33.

General delivery notes

On delivery check that there is the following with the appliance:

– Instruction manual

– Certificate of guarantee

– Caps

– Inlet hose

and check that no damage has occurred during transit, and if so, call your nearest

Authorised Technical Support Service agent (see Customer Service)

Safety notes.

Note: for any cleaning or maintenance procedure for the

washing machine

A) Pull out the plug

B) Turn off the tap

C) Candy equips all its appliances with earthing. Ensure that the mains supply is earthed,

and if it is not, seek assistance from a qualified person.

D) Do not touch the appliance when hands or feet are wet or damp. Do not use the

appliance with bare feet.

E) The use of adapters, multiple connectors and/or extensions is not recommended.

Note:

water temperature can reach 90°C during the wash cycle

F) Check there is no water left in the drum before opening the door.

G) This appliance is not intended for use by persons (including children) with reduced

physical, sensory or mental capabilities, or lack of experience and knowledge, unless

they have been given supervision or instruction concerning use of the appliance by a

person responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

H) Do not pull the power cable or the appliance itself to remove the plug from the socket.

I) The appliance must not be exposed to weather conditions (rain, direct sun, etc...)

L) When moving the appliance never lift it by the controls or by the detergent drawer.

When in transit never rest the door against the trolley or transport the appliance without

the polystyrene base.

DRYING

If you would like the drying cycle to begin automatically after

washing, select the programme required using the Drying

Selection button.

Otherwise it is possible to finish the wash and then decide on the

drying programme and load.

M) N.B!

If the appliance is installed on a carpeted floor ensure that the ventilation holes on the

base of the appliance are not obstructed.

N) If the appliance is not running properly or breaks down, switch it off, turn off the tap and do

not tamper with the appliance.

Consult only the Authorised Technical Support Service for possible repair and ask them to

use original spare parts.

Failure to comply with the above can compromise the safety of the appliance.

O) If the appliance’s power cable should ever need replacing, consult the Authorised

Technical Support Service

Quick start

Washing

- Open the door by using the handle “A” (Fig. 1, page 6)

- Select laundry and put it in the machine

- Close the door

- Put detergent in the compartments as indicated in the programme guide in this instruction

manual

- Select programme

- The display will show the settings for the programme selected.

- Adjust the wash temperature if necessary.

Press additional function buttons (if required)

- Press the “Start/Pause” button (page 8)

- The programme starts.

After washing

- The word “End” will appear on the display.

- Wait for the door lock to be released

(about 2 minutes after the programme has finished).

The “Door Security” indicator light will go out.

- Switch off the washing machine by turning the

selector to “OFF” position.

- Open the door and remove the laundry.

Ensure that the machine is correctly installed in line with the instructions found on page 33.

Auto

6090 40 30

60’

120’

30’

90’

DETECTOR

Rapid

14-30-44 Min

OFF

Jeans

Rapid + 59 Min

+ Pre

GFHC N

Description of controls

A handlerooD

Bthgil rotacidni "ytiruceS rooD"

C nottub "esuaP/tratS"

Dnottub "hsinaV niatS"

Enottub "eraC ygrellA"

Fnottub "tratS yaleD"

Gnottub "noitceleS erutarepmeT"

Hnottub "noitceleS gniyrD"

I nottub "deepS nipS"

Lyalpsid latigiD

Mnottub leveL niatS

Programme selector with “OFF” position N

Othgil rotacidni snottuB

Preward tnegreteD

“KG DETECTOR”

(Function active only on Cotton and Synthetics programmes)

Through every wash phase “KG DETECTOR” allows to monitor information on

the wash load in the drum.

So, as soon as the “KG DETECTOR” is set in motion, in the first 4 minutes of the wash, it:

- adjusts the amount of water required

- determines the length of the wash cycle

- controls rinsing

according to the type of fabric selected to be washed it:

- adjusts the rhythm of drum rotation for the type of fabric being washed

- recognises the presence of lather, increasing, if necessary, the amount of water during

rinsing

- adjusts the spin speed according to the load, thus avoiding any imbalance.

In this way “KG DETECTOR” is able to decide, by itself, the most suitable programme for

each individual wash from the hundreds of possible wash combinations.

“KG DETECTOR” meets the need for easy use by permitting a simplified programme

selection. In fact, the user need only tell the machine the type of fabric in the drum and the

degree of soiling, to obtain a perfect wash with the highest level of drying possible with a spin

which really cares for your clothes.

“START/PAUSE” button

Press to start the selected cycle .

Changing the settings after the programmes has started (PAUSE)

Press and hold the “START/PAUSE” button for about 2 seconds, the flashing lights on the

options buttons and time remaining indicator will show that the machine has been paused,

adjust as required and press the “START/PAUSE” button again to cancel the flashing lights.

If you wish to add or remove items during washing, wait 2 minutes until the safety device

unlocks the door.

When you have carried out the manoeuvre, close the door, press "Start/Pause" button and

the appliance will continue working where it left off.

CANCELLING THE PROGRAMME

To cancel the programme, set the selector to the OFF position. Select a different programme.

Re-set the programme selector to the OFF position.

“DOOR SECURITY” indicator light

The “Door Security” indicator light is illuminated when the door is fully closed and the machine is ON.

When "Start/Pause" is pressed on the machine with the door closed the indicator will flash

momentarily and then illuminate.

If the door is not closed the indicator will continue to flash.

A special safety device prevents the door from being opened immediately after the end of the cycle.

Wait for 2 minutes after the wash cycle has finished and the “Door Security” light has gone out

before opening the door. At the end of the cycle turn the programme selector to "OFF" .

NOTE:

few seconds after the start the wash cycle will begin.

During the first 4 minutes of the wash cycle, the KG

DETECTOR (active only on cotton and synthetics

programmes) will weigh the clothes and update the

maximum wash time remaining on the display every five

seconds until the weight has been determined. While this

function is operating the “KG DETECTOR” indicator is on.

Door handle

To open the door turn the handle in the manner illustrated in fig.

“STAIN VANISH” Button

By pressing this button, which can only be activated in the Cotton cycles, the sensors in the

new system come into operation. They affect both the selected temperature, keeping it at a

constant level throughout the wash cycle, and the mechanical function of the drum.

The drum is made to turn at two different speeds at crucial moments. When the detergent

enters the garments, the drum rotates in such a way that the detergent is distributed in a

uniform manner; during the wash and rinse procedures, however, the speed increases in

order to maximise the cleaning action. Thanks to this special system, the efficiency of the

wash procedure is improved WITHOUT ANY INCREASE IN THE LENGTH OF THE

PROGRAM.

The option buttons should be selected before pressing

the "Start/Pause" button.

“ALLERGY CARE” button

By pressing this button you can activate a special new wash cycle in the Cotton and Mixed

Fabrics programs, thanks to the new Sensor System. This option treats with care the fibres of

garments and the delicate skin of those who wear them.

The load is washed in a much larger quantity of water and this, together with the new combined

action of the drum rotation cycles, where water is filled and emptied, will give you garments which

have been cleaned and rinsed to perfection. The amount of water in the wash is increased so that

the detergent dissolves perfectly, ensuring an efficient cleaning action. The amount of water is also

increased during the rinse procedure so as to remove all traces of detergent from the fibres. This

function has been specifically designed for people with delicate and sensitive skin, for whom even

a very small amount of detergent can cause irritation or allergy.

You are advised to also use this function for children’s clothing and for delicate fabrics in general,

or when washing garments made of towelling, where the fibres tend to absorb a greater quantity of

detergent. To ensure the best performance for your wash, this function is always activated on the

Delicates and Woollens/Hand Wash programs.

“DELAY START” button

This button allows you to pre-programme the wash cycle to delay the start of the cycle for up

to 24 hours.

To delay the start use the following procedure:

Set the required programme.

Press the button once to activate it (h00 appears on the display) and then press it again to set

a 1 hour delay (h01 appears on the display); the pre-set delay increases by 1 hour each time

the button is pressed, until h24 appears on the display, at which point pressing the button

again will reset the delay start to zero.

Confirm by pressing the “START/PAUSE” button (the light on the display starts to flash). The

countdown will begin and when it has finished the programme will start automatically.

Warning: If there is any break in the power supply while

the machine is operating, a special memory stores the

selected programme and, when the power is restored, it

continues where it left off.

It is possible to cancel the delay start by taking the following action:

Press and hold the button for 5 seconds until the display will show the settings for the

programme selected.

At this stage it is possible to start the programme previously selected by pressing the

“START/PAUSE” button or to cancel the process by setting the selector to the OFF position

and then selecting another programme.

“TEMPERATURE SELECTION” button

When a programme is selected the relevant indicator will light up to show the recommended

wash temperature.

The Temperature button can be used to decrease or increase the temperature of your chosen

wash cycle.

Each time the button is pressed, the new temperature level is shown on the Wash

Temperature Indicator.

If you want carry out a cold wash all the indicators must be off.

“DRYING SELECTION” button

With the programme selector not in the OFF position, press the button to select the required

drying programme; an indicator will light to display the drying result selected each time you

press the button.

To cancel the selection before the start of a drying programme, press the button repeatedly

until the indicators go out or return the programme selector to the OFF position.

To cancel the

cycle during the drying phase, hold the button down for 2 seconds until the

cooling indicator lights up; given the high temperature inside the drum, we recommend that

you allow the dryer to complete the cool down period before returning the programme

selector to the OFF position and removing the laundry.

“SPIN SPEED” button

The spin cycle is very important to remove as much water as possible from the laundry without

damaging the fabrics. You can adjust the spin speed of the machine to suit your needs.

By pressing this button, it is possible to reduce the maximum speed, and if you wish, the spin cycle

can be cancelled. To reactivate the spin cycle press the button until you reach the spin speed you

would like to set. To prevent damage to the fabrics, it is not possible to increase the speed over

that which is automatically suitable during the selection of the program.

It is possible to modify the spin speed without to pausing the machine.

Note:

The machine is fitted with a special electronic device, which prevents

the spin cycle should the load be unbalanced. This reduces the noise

and vibration in the machine and so prolongs the life of your machine.

“DIGITAL” Display

The display’s indicator system allows you to be constantly informed about the status of the machine:

1) WASH TEMPERATURE

When a programme is selected the relevant indicator will light up to show the recommended

wash temperature. The Temperature button can be used to decrease or increase the

temperature of your chosen wash cycle. Each time the button is pressed, the new

temperature level is shown on the Wash Temperature Indicator.

If you want carry out a cold wash all the indicators must be off.

2) DOOR LIGHT

Once the START/PAUSE button has been pressed the light first flashes then stops flashing

and remains on until the end of the wash. 2 minutes after the end of the wash the light goes

off to show that the door can now be opened.

3) SPIN SPEED

Once the programme has been selected, the maximum spin speed allowed for that

programme appears on the display. Pressing the spin button will reduce the speed by 100

rpm each time the button is pressed. The minimum speed allowed is 400 rpm, or it is

possible to omit the spin by pressing the spin button repeatedly.

4) DELAY START LIGHT

This flashes when delay start has been set.

5) CYCLE DURATION

When a programme is selected the display automatically shows the cycle duration, which

can vary, depending on the options selected. Once the programme has started you will be

kept informed constantly of the time remaining to the end of the wash.

If is selected the automatic washing/drying, at the end of the wash phase, the drying time

remaining to the end will be shown on the display.

The appliance calculates the time to the end of the selected programme based upon a

standard loading, during the cycle, the appliance corrects the time to that applicable to

the size and composition of the load.

Auto

6090 40 30

60’

120’

30’

90’

DETECTOR

{

6) KG DETECTOR indicator

Available on Cotton and Synthetic cycles, during the first 4 minutes of the cycle the intelligent

sensor will weigh the laundry and adjust the cycle time, water and electricity consumption

accordingly.

7) DRYING PROGRAMME INDICATORS

The indicators display the type of the drying programme:

Candy washer dryers incorporate an Automatic Sensor Drying function which takes the

guesswork out of setting the drying time. You simply select the degree of dryness you

require and the dryer automatically switches off when that level is reached. For added

flexibility there are 3 Sensor Drying levels to choose from:

= Extra dry programme

= Cupboard dry programme

= Iron dry programme

USEFUL TIPS:

Once the programme option has been selected, press the Start Pause button. The appliance

will then calculate the time to the end of the selected programme based upon a full dry load.

During the cycle the appliance will update the time to suit the actual load size and dampness

of the fabrics.

imed programmes:

Alternatively you may select a pre-determined time for the drying cycle. The Timed Drying

programmes may be set to the following times:

120 minutes – 90 minutes – 60 minutes – 30 minutes:

Cool down phase

A 10 minute cool down phase occurs at the end of each drying cycle to ensure clothes are

not too hot to touch when the cycle finishes.

8) STAIN LEVEL

When a programme is selected the relevant indicator will light up to show the minimum

possible Stain Level.

Selecting a greater Stain Level using the special button will cause the corresponding indicator to

light up.

Auto

6090 40 30

60’

120’

30’

90’

DETECTOR

{

PROGRAMME selector with "OFF" position

When the programme selector is turned

the display lights up to show the settings

for the programme selected.

N.B. To switch the machine off, turn the

programme selector to the “OFF”

position.

Press the "Start/Pause" button to start the selected cycle.

Once a programme is selected the programme selector remains stationary on the selected

programme till cycle ends.

Switch off the washing machine by turning the selector to "OFF".

Note:

The programme selector must be returned to the "OFF" position

at the end of each cycle or when starting a subsequent wash

cycle prior to the next programme being selected and started.

Buttons indicator light

These light up when the relevant buttons are pressed.

If an option is selected that is not compatible with the selected programme then the light on

the button first flashes and then goes off.

“STAIN LEVEL” button

By selecting this button (active only on COTTON and MIXED FIBRES programmes) there is

a choice of 3 levels of wash intensity, depending on how much the fabrics are soiled.

Once the programme has been selected the indicator light will automatically show the

minimum level required for that programme. Pressing the button increases the duration of the

wash cycle, and adjusts the wash settings accordingly. For example: Using this button on

the Rapid Wash cycle will enable you to select either a 14, 30 or 44 minute wash cycle.

Today, most detergents have been improved to wash

efficiently at lower temperatures, therefore we have set the

default temperature settings of each programme to a lower

level, saving electricity and reducing the carbon footprint of

your machine.

You can select an high temperature by pressing the

temperature button.

Please refer to the programme guide for the maximum

temperature to which each programme can be set.

II I

3,5

2,5

1,5

2,5

3,5

1,5

RECOMMENDED

TEMP.

°C

60°

40°

30°

40°

30°

MAX TEMP.

°C

Up to:

90°

Up to:

60°

Up to:

60°

Up to:

40°

Up to:

40°

Up to:

30°

Up to:

40°

Up to:

30°

Up to:

40°

Up to:

40°

Up to:

30°

Up to:

30°

Resistant fabrics

Cotton, linen

with Prewash

Cotton, mixed

resistant,

Coloureds

Mixed fabrics and synthetics

Cotton, mixed fabrics, synthetics

Very delicate fabrics

“MACHINE WASHABLE”

woollens

Hand wash

Rinse

Fast spin

Drain only

Jeans Programme

Resistant fabrics

Mixed fabrics and synthetics

Rapid 14 minute

Resistant fabrics

Mixed fabrics and synthetics

Rapid 30 minute

Resistant fabrics

Mixed fabrics and synthetics

Rapid 44 minute

Mixed, delicate

synthetics

Mixed - Drying

Cotton - Drying

Cotton - Mixed

TABLE OF PROGRAMMES

PROGRAMME

SELECTOR ON:

PROGRAM FOR:

WEIGHT

MAX

CHARGE DETERGENT

Rapid

14-30-44 Min

Jeans

Rapid + 59 Min

+ Pre

drying programme ( ) cupboard dry ( ).

) cupboard dry ( ).drying programme (

Please read these notes

When washing heavily soiled laundry it is recommended the load is reduced to 4 kg maximum.

Information for the test laboratories

(Ref. EN 50229 Standards)

Washing

Use the programme ** with the maximum degree of soiling selected, maximum spin speed

and a temperature of 60°C.

Programme recommended also for test with a lower temperature.

Drying

First drying with 5kg (the load consist: pillowcases and hand-towels) selecting the cotton

Second drying with 2kg (the load consist: 2 sheets and hand towels) selecting the cotton

The spin speed may also be reduced, to match any guidelines suggested on the fabric label, or

for very delicate fabrics cancel the spin completely this option is available with a spin speed

button.

Pressing the wash temperature button makes it possible to wash at any temperature below

the maximum allowed.

* Programmes for automatic drying.

1) For the programmes shown you can adjust the duration and intensity of the wash

using the degree of soiling button.

2) Using the Degree of soiling button on the Rapid cycle will enable you to select either a

14, 30 or 44 minute wash cycle.

Rapid

14-30-44 Min

OFF

Jeans

Rapid + 59 Min

+ Pre

Programme selector

For the various types of fabrics and various degrees of dirt the washing machine has

different programme bands according to: wash cycle, temperature and lenght of cycle (see

table of washing cycle programmes).

COTTON WITH PRE WASH

The Cotton programme is designed for maximum washing and rinsing

efficiency. With spin cycles in between, the programme guarantees the

laundry is rinsed perfectly. The final spin cycle ensures laundry is spun dry

as much as possible up to the maximum speed.

The Cotton programme includes a Prewash cycle. This option is

particularly useful for really dirty loads and can be used independently of

the main wash programme. Additional detergent for the Prewash part of

the programme should be added to the first compartment of the soap

drawer labelled "I" (please refer to the section of this manual entitled

“Detergent”). We recommend you use only 20% of the quantity used for

the main wash programme.

COTTONS

The Cottons programme is also designed for maximum washing and

rinsing efficiency. With spin cycles in between, the programme guarantees

the laundry is rinsed perfectly. The final spin cycle ensures laundry is spun

dry as much as possible up to the maximum speed. This cycle is set to

40°C, but the temperature may be altered using the Temperature option

button.

MIXED AND SYNTHETIC FABRICS

The main wash and the rinse gives best results thanks to the rotation

rhythms of the drum and to the water levels.

A gentle spin will mean that the fabrics become less creased.

SPECIAL DELICATE FIBRES

This is a new wash cycle which alternates washing and soaking and is

particularly recommended for very delicate fabrics.

The wash cycle and rinses are carried out with high water levels to ensure

best results.

WOOLMARK PROGRAMME

The special cycle, enables to thoroughly wash garments without

damaging them. The cycle comprises of alternate periods of activity and

pauses. The programme has a maximum temperature of 40° and

concludes with 3 rinses and a short spin.

+ Pre

SPECIAL “HAND WASH”

This washing machine also has a gentle Hand Wash programme cycle.

This programme allows a complete washing cycle for garments specified

as “Hand Wash only” on the fabric care label. The programme has a

temperature of 30°C and concludes with 3 rinses and a slow spin.

SPECIAL “RINSE” PROGRAMME

This programme carries out three rinses with a intermediate spin (which

can be reduced or excluded by using the correct button). It can be used

for rinsing any type of fabric, eg. use after hand-washing.

SPECIAL “SPIN” PROGRAMME

Programme “SPIN” carries out a maximum spin (which can be reduced by

using the correct button).

DRAIN ONLY

This programme drains out the water.

JEANS PROGRAMME

This specially designed programme maintains the high quality wash performance

for resistant fabrics like Jeans.

The programme has a maximum temperature of 40°C, ideal for removing the

dirty without damaging the elasticity of the fibres.

RAPID PROGRAMME

This programme is particularly suited to slightly dirty cottons and mixed

fabrics. Using the Stain Level button on the Rapid cycle will enable you to

select either a 14, 30 or 44 minute wash cycle.

When selecting the rapid programme, please note that we recommend you

use only 20% of the recommended quantities shown on the detergent

pack. For information about these programmes please refer to the programmes

table.

Rapid

14-30-44 Min

Jeans

“SHIRTS” PROGRAMME

This programme allows a complete washing cycle for shirts.

The main wash and the rinse gives best results thanks to the rotation

rhythms of the drum and to the water levels.

The programme has a maximum temperature of 40°C and concludes with

3 rinses and a short spin.

DRYING

Note: Dispensers used for concentrated powders and liquid

detergents must be removed from the drum before commencing the

tumble drying programmes.

The drum changes direction during the drying cycle to prevent the laundry

from tangling and hence produce even drying. Cool air is used during the

last ten minutes of the drying cycle to minimise creasing.

LOW HEAT

Low temperature drying programme for synthetics and mixed fibres,

always refer to the care label.

HIGH HEAT

High temperature drying programme for Cottons and linen items, always

refer to the care label

WASH'N DRY 59’

When you only have a few items to wash and dry in a hurry, this 59

minute cycle is the ideal time saver!

Suitable for a light 1.5kg load size (e.g. 4 shirts) or slightly dirty

fabrics, this cycle will wash, rinse, spin and dry your garments in

under an hour.

We recommend that you reduce the detergent dosage when using

this programme to avoid wastage.

Rapid + 59 Min

Detergent drawer

The detergent drawer is split into 3 compartments:

- the compartment labelled "I" is for prewash detergent;

- the compartment labelled " " is for special additives,

fabric softeners, fragrances, starch, brighteners etc;

- the compartment labelled "II" is for main wash

detergent.

NOTE:

Some Detergents are Difficult to

utilise. Ensure to use an in drum

dispenser if recommended by

the detergent Manufacturer.

Note: only put liquid products in the compartment

labelled “ ”. The machine is programmed to

automatically take up additives during the final rinse

stage for all wash cycles.

Detergents, washing aids and amounts to use

Choice of detergent

General purpose detergents

- Powder detergents, for a thorough wash, with bleaching agent, particularly suitable for

use in hot wash programmes (60°C and over), for heavily soiled and stained laundry.

- Liquid detergents, particularly suitable for grease stains, such as greasy skin marks,

cosmetics and oil.

These detergents are not suitable for washing stained laundry, as they do not contain

bleach.

- Biological detergents, not all the products available give a really thorough wash.

Additional laundry aids

- Water softener, means less detergent can be used where water hardness is classed as

hard to very hard.

- Prewash substances, for the programmed treatment of stains prior to the main wash.

Using them means the subsequent wash can be at a low temperature or with bleach-free

detergents.

- Fabric softener, prevents static build-up in synthetic fabrics and softens fabrics.

If you own a tumble dryer, clothes are softened even without the use of a fabric softener.

Do not put solvents in the washing machine!

Keep detergents and other laundry products out of children’s reach.

Before pouring in the detergent check that there are no foreign bodies in the detergent

drawer.

Dosage details are usually shown on the detergent packaging. Follow those instructions.

La pagina sta caricando ...

Candy CDB 754DN/1-80 Manuale utente

Marca: Candy

Modello: CDB 754DN/1-80

Categoria: Lavatrici

Tipo: Manuale utente

Questo manuale è adatto anche per

CDB 754DN

Scarica il pdf

rapporto

Candy CDB 754DN/1-80 Manuale utente

Questo manuale è adatto anche per

Candy CDB 754DN/1-80 Manuale utente

Documenti correlati

Altri documenti