Worx WG785E Manuale utente

Categoria
Tosa erba
Tipo
Manuale utente

Questo manuale è adatto anche per

P08
P19
P31
P42
P53
P64
WG785E
Cordless lawn mower EN
Schnurloser Rasenmäher D
Tondeuse à gazon sans fil F
Falciatrice per prato senza fili I
Cortacésped sin cables ES
Snoerloze graasmaaier NL
Original instructions EN
Übersetzung der Originalanleitung D
Traduction des instructions initiales F
Traduzione delle istruzioni originali I
Traducción de las instrucciones originales ES
Vertaling van de oorspronkelijke instructies NL
13
11
A2
A1 B1
1
6
7
8
9
10
11
12
2
3
4
5
a
Front Part
Back Part
1
2
3
12
B4
B5
B3
C1
B2
C2
C3 C4 D1
D2 D3 E
14
1
PRESS
1
2
N-1
N-2
N-3
a
b
1
2
O-1
O-2
O-3
F2 G1
F1
HI
G2
KL
J
NO
M
15
16
P2 Q
P1
98
Cordless Lawn mower EN
98
1. SWITCH LEVER
2. CABLE CLIP
3 GRASS BAG FILLING INDICATOR
4. GRASS COLLECTION BAG
5. WORK MODE DIAL
6. SAFETY KEY
7. UPPER HANDLE
8. LOCK CAM LEVER
9. LOWER HANDLE
10. SAFETY FLAP
11. BATTERY PACK*
12. MOTOR COVER
13. CHARGER*(See A2)
14. MULCH INSERT (See H)
15. BLADE BOLT (See P1)
16. BLADE (See P1)
* Not all the accessories illustrated or described are included in standard delivery.
98
98
Cordless Lawn mower EN
TECHNICAL DATA
Voltage 24V
Cutting diameter 40cm
Cutting height 20-70mm
Cutting height positions 6 positions
Grass collection capacity 50L
Battery capacity 10Ah
Battery type Lead acid
Battery model WA3218
Charging time 10-12hrs
Charger model WA3720
Charger rating Input: AC 220-240V, 50/60Hz
Output: 29.5V , 1.0A
Machine Weight 23kg
NOISE/VIBRATION INFORMATION
A weighted sound pressure LPA : 80dB(A)—TURBO mode KPA: 3dB(A)
LPA : 70dB(A)—QUIET mode KPA: 3dB(A)
A weighted sound power LWA: 93dB(A)
Wear ear protection when sound pressure is over
80dB(A)
Typical weighted vibration 4.0m/s2 K=1.5m/s2
ACCESSORY
Battery pack 1
Charger 1
Grass collection bag 1
Mulching insert 1
Lock cam lever 2
We recommend that you purchase your accessories from the same store that sold you the
tool. Use good quality accessories marked with a well-known brand name. Choose the type
according to the work you intend to undertake. Refer to the accessory packaging for further
details. Store personnel can assist you and offer advice.
1110
Cordless Lawn mower EN
1110
GENERAL POWER TOOL
SAFETY WARNINGS
WARNING! Read all safety warnings
and all instructions. Failure to follow
the warnings and instructions may result in
electric shock, fire and/or serious injury.
Carefully read the instructions for the
safe operation of the machine.
Save all warnings and instructions for
future reference.
- This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision
or instruction concerning use of the
appliance by a person responsible for
their safety.
- Children should be supervised to ensure
that they do not play with the appliance.
TRAINING
a) Read the instructions carefully. Be familiar
with the controls and the proper use of
the equipment;
b) Never allow children or people unfamiliar
with these instructions to use the
lawnmower. Local regulations can restrict
the age of the operator;
c) Never mow while people, especially
children, or pets are nearby;
d) Keep in mind that the operator or user
is responsible for accidents or hazards
occurring to other people or their
property.
PREPARATION
a) While mowing, always wear substantial
footwear and long trousers. Do not
operate the equipment when barefoot or
wearing open sandals;
b) Thoroughly inspect the area where the
equipment is to be used and remove
all objects which can be thrown by the
machine;
c) Before using, always visually inspect to
see that the blades, blade bolts and cutter
assembly are not worn or damaged.
Replace worn or damaged blades and
bolts in sets to preserve balance;
d) On multi-bladed machines, take care as
rotating one blade can cause other blades
to rotate.
OPERATION
a) Mow only in daylight or in good artificial
light;
b) Avoid operating the equipment in wet
grass, where feasible;
c) Always be sure of your footing on slopes;
d) walk, never run;
e) For wheeled rotary machines, mow
across the face of slopes, never up and
down;
f) Exercise extreme caution when changing
direction on slopes;
g) Do not mow excessively steep slopes;
h) Use extreme caution when reversing or
pulling the lawnmower towards you;
i) Stop the blade(s) if the lawnmower has to
be tilted for transportation when crossing
surfaces other than grass, and when
transporting the lawnmower to and from
the area to be mowed;
j) Never operate the lawnmower with
defective guards, or without safety
devices, for example deflectors and/or
grass catchers, in place;
k) Switch on the motor carefully according
to instructions and with feet well away
from the blade(s);
l) Do not tilt the lawnmower when
switching on the motor, except if the
lawnmower has to be tilted for starting
In this case, do not tilt it more than
absolutely necessary and lift only the part
which is away from the operator;
m) Do not put hands or feet near or under
rotating parts. Keep clear of the discharge
opening at all times;
n) Not to touch the blades before the
disabling device has been removed and
the blades have come to a complete stop;
o) To remove the disabling device
Whenever leaving the machine
unattended,
Before clearing a blockage,
Before checking, cleaning or working
1110
1110
Cordless Lawn mower EN
on the machine,
After striking a foreign object,
Whenever the machine starts
vibrating abnormally.
MAINTENANCE AND STORAGE
a) Keep all nuts, bolts and screws tight to
be sure the equipment is in safe working
condition;
b) Check the grass catcher frequently for
wear or deterioration;
c) Replace worn or damaged parts for
safety.
SYMBOLS
Read instruction handbook before
operation this machine.
Warning
Keep bystanders away.
Blade continues to rotate after
the machine is switched off. Wait
until all machine components
have completely stopped before
touching them.
Beware of sharp blades. Blades
continue to rotate after the motor is
switched off.
Remove plug from mains before
maintenance or if cord is damaged.
Keep the supply flexible cord away
form the blades.
Do not expose to rain or water.
Do not burn.
Do not dispose of batteries. Return
exhausted batteries to your local
collection or recycling point.
Contains Pb battery. Battery must
be recycled or disposed of properly.
WEEE marking
1312
Cordless Lawn mower EN
1312
INTENDED USE
This product is intended for domestic lawn
mowing.
CHARGER SAFETY RULES
1. Plug charger directly into an electrical
outlet. DO NOT ABUSE THE CORD. Never
carry charger by cord. Do not disconnect
the charger from the outlet or mower by
pulling it by the cord.
2. CAUTION: To reduce the risk of fire,
electrical shock, or personal injury do
not attempt to use this charger with any
other product.Likewise, do not attempt to
charge the battery with any other charger.
3. Do not service mower with charger or
safety key installed.
4. Do not operate a damaged charger. Replace
damaged cords or charger immediately at
an authorized WORX service center.
5. Always charge the mower in a dry area
protected from the weather. Do not expose
the mower or charger to rain. Do not charge
in wet locations. Do not charge mower
when temperature is above 104°F (40°C) or
below 41°F (5°C).
6. Keep the mower and charger away from
water, heat sources, (Such as radiators,
heaters, stoves...etc.) flames, or chemicals.
Be careful not to damage the charger cord,
by keeping cord away from sharp edges.
CHARGING PROCEDURE
1. Charging can be carried out either with
the battery FITTED (See A1) or REMOVED
from the machine (See A2).
2. Plug the charger connector into the
receptacle on the battery. (See A1, A2).
3. Insert the plug of the charger into the wall
receptacle.
4. Press the button on the charger, the red
light should come on indicating that
you have power and the battery is being
charged.
5. The red light will turn off and the green
light will come on when charging is
complete (approximately 10-12 hours to
charge a fully discharged battery)
6. After the battery is fully charged the green
light will turn on and stay it for 5 seconds
to indicate a full charge. After 5 seconds the
green light and charges will turn off to save
power.
NOTE: if the battery is defective, the
red light will flash.
The lights will only function when
the charger is connected to both the
battery and wall receptacle.
7. The charger is a smart charger and can stay
connects to the battery and wall receptacle
for extant periods of time without fear
of damaging the battery or charger. The
charger will automatically turn on to ensure
the battery is fully charged.
BATTERY CARE
The battery in your cordless lawnmower is a
24-volt sealed lead acid system. The mower
can be stored in any position without fear of
leakage.
• Foroptimalbatterylifeandperformance
the battery should be fully charged every 2
months during storage
• Foroptimalbatterylifeandperformance
the battery should be fully charged after
each use
• Storethebatteryinacooldrylocation.
• Thebatterycanbesafelystoreddownto
14°F (-10°C).
• Thebatterydoesnotneedtobefully
discharged before recharging.
• Initially2to3chargingcyclesmay
be required after purchase to achieve
maximum run time capacity.
ADDITIONAL BATTERIES can be obtained
from the Customer Helpline.
ASSEMBLY
IMPORTANT! Before you
assemble the lawn mower, check
the accessories according above
information, make sure the accessories
are completed.
1312
1312
Cordless Lawn mower EN
1. FITTING THE HANDLE (See B1~B5)
1) Remove the screws (X 2) on the both side
of deck. (Fig B1)
2) Insert the lower handle (9) into the holes on
the deck provided.(Fig B2)
3) Secure with the screws provided.(Fig B2)
4) Attach the upper handle (7) with the bolts
and lock cam lever (8) to the lower handle
(9). (Fig B3)
5) Tightening the two Lock cam levers. Check
that the handle is FULLY secured.
The cam lever pressure can be adjusted by
adjusting the lock cam lever (8) clockwise/
counter-clockwise. DO NOT OVER TIGHTEN.
(Fig. B4)
NOTE: Ensure the bolts are fully inserted
through the handles before fitting the
handle knobs.
6) Attach the cable clips (2) provided, to the
upper and lower handle. Insert the cable
into the clips ensuring there is enough
cable slack. (Fig B5)
2. GRASS COLLECTION BAG ASSEMBLY
Connect the grass box handle to the box top
as shown in F ig C1-C4.
Step 1 Press the front of the handle briefly.
(Fig C2)
Step 2 Then push it forward. (Fig C2)
Step 3 Push down the back of the handle.
(Fig C2)
Step 4 Finally, clip the plastic clips over the
metal frame. (Fig C3)
WARNING: Don’t fit the handle in
reversed direction. Fit the handle as
shown in Fig C1.
3. GRASS COLLECTION BAG FITTING
(See D1, D2, D3)
1) Turn the mower off, wait until blade stops
and remove safety key (6).
2) Raise the safety flap (10) and hold it up,
ensure that the mulching insert has been
removed.
3) Pick up the grass bag by the handle, and
position grass bag on the lower hooks (a)
on the mower deck (Fig. D2).
4) Release the safety guard to lock the grass
bag into position. Ensure the grass bag is
installed securely (Fig. D3).
NOTE: Depress the grass bag slightly to
ensure that it is completely installed.
4. REMOVING/EMPTYING
Hold the grass bag, lift the safety flap (10) and
hold up. Remove grass bag (4).
WARNING! Always check the safety flap
can close the discharge outlet tightly
before using. Never lift the safety flap (10)
when the lawn mower is being used without
fitted grass bag.
5. HANDLE ADJUSTMENT (See E)
The upper handle can be adjusted to 3
different height positions. Release the locking
cam lever, set the upper handle to one of the
three height positions, and make sure to insert
the pin into the hole. Then reset the locking
cam lever.
NOTE: Always check that the upper handle is
fixed firmly.
6. FITTING/REMOVING BATTERY (See F1,
F2)
REMOVING BATTERY
Pull out the battery with the battery handle
directly. (See F1)
NOTE: Be careful not to drop the battery onto
your foot or on the ground when removing it.
FITTING BATTERY
Put the battery into the battery container; make
sure the battery is fitted correctly. (See F2)
OPERATION
1. STARTING AND STOPPING (See G1, G2)
WARNING! The blade continues
to rotate for a few seconds after the
machine is switched off. Allow the motor/blade
to stop rotating before switching on” again.
Do not rapidly switch off and on.
STARTING
1) Insert safety key into the housing of the
switch box.
2) Slide the key to the right and hold in
position.
3) Pull the lever bar towards the handle and
the mower will start.
4) Release the safety key.
1514
Cordless Lawn mower EN
1514
STOPPING
Release the switch lever.
2. INSTALLING MULCH INSERT (14) (See H)
1) Turn the mower off, wait until the blade
stops and remove the safety key (6).
2) Raise the safety guard and hold it up.
3) Slide the mulching insert into the discharge
opening until it is firmly in contact with the
deck.
4) Release safety guard and ensure it is
properly closed.
3. REMOVING MULCH INSERT(14) (See H)
To remove the mulching insert so that you can
collect the grass, follow the steps listed below:
1) Shut the mower off, wait until the blade
stops and remove the safety key.
2) Raise the safety guard and hold it up.
3) Grasp the middle of the insert, lift and pull
out the mulching insert completely.
4) The safety guard is spring loaded. When
you release it, the guard will return to the
closed position.
4. WORK MODE DIAL (See I)
Status1: QUIET mode
Select QUIET mode when mowing in everyday
conditions, removing approximately 20mm of
grass at a time.
Status2: TURBO mode
Set the dial to TURBO mode when cutting
dense or overgrown grass.
5. BATTERY STATUS LED’S (See J)
NOTE: The Status LED’s will indicate the
battery condition when the button on the
battery is pressed.
The LEDs constantly senses and displays the
battery condition as follows:
Press the button “PRESS”, the light button is
illuminated.
When the three green lights are illuminated,
the battery is in a highly charged condition.
When two lights ( ) are illuminated, the
battery is in a moderately charged condition.
When only one green light ( ) is illuminated,
the battery charge is depleted.
Before using your new mower for the first
time, it is recommended that the unit be
charged overnight to ensure that the battery is
fully charged.
IMPORTANT
When only one light is illuminated,
your battery is overly discharged, even
though the mower may still be capable
of cutting grass. Continuing to operate
your lawnmower with the battery in this
discharged condition may reduce the life
and performance of your battery.
6. ADJUSTING THE CUTTING HEIGHT
(See K)
WARNING! Stop, release switch lever and
wait until the motor stops before adjusting
height. The blades continue to rotate after the
machine is switched off, a rotating blade can
cause injury.
CAUTION: Do not touch rotating blades.
For the first cutting of the season, a high
cutting adjustment should be selected. The
lawnmower can be set to 6 cutting heights
between 20mm and 70mm. For this purpose,
move the cutting height adjustment lever
outwards then adjust to the preferred position.
7. GRASS BAG FILLING INDICATOR (See L)
To remind you immediately to empty when
the grass bag is full, the mower provides
an indicator on the top of bag to show the
collection status. And you can follow as below:
Empty status: flap float (a)
Fully status: flap fall down (b)
8. REAR DISCHARGE (See M)
The mower provides a rear discharge function,
so that you can mower without bag collection.
The debris will be discharged from the rear
chute.
1514
1514
Cordless Lawn mower EN
9. MOWING TIPS
NOTE: always inspect area where mower
is to be used and remove all stones,
sticks, wire, metal and other debris
which might be thrown by the rotating
blade.
1) Mow across the face of slopes, never up-
and-down. Exercise extreme caution when
changing direction on slopes. Do not mow
excessively steep slopes. Always maintain
good footing.
2) Release switch lever to turn mower OFF
when crossing any graveled area (stones
can be thrown by the blade).
3) Set mower at highest cutting height when
mowing in rough ground or in tall weeds.
Removing too much grass at one time can
cause circuit breaker to trip, which stops
mower.
4) If a grass bag is used during the fast
growing season, the grass may tend to clog
up at the discharge opening. Release switch
lever to turn mower OFF” and remove
the safety key. Remove the grass bag and
shake the grass down to the back end of
the bag. Also clean out any grass or debris
which may be packed around the discharge
opening. Replace the grass bag.
5) If mower should start to vibrate abnormally,
release switch lever to turn mower OFF”
and remove safety key. Check immediately
for cause. Vibration is a warning of trouble.
Do not operate mower until a service check
has been made.
6) Always release switch lever to turn
mower “off” and remove safety key
when leaving it unattended even for a
short period of time.
10. MULCHING MOWING TIPS
While mulching, your new mower is designed
to cut the grass clippings into small pieces
and distribute them back into the lawn.
Under normal conditions, the mulched grass
will biodegrade quickly to provide nutrients
to the lawn. Please review the following
recommendations for optimum mulching
performance.
1) Avoid mowing when the grass is wet from
rain or dew. Wet grass may form clumps
which interfere with the mulching action
and reduce runtime. The best time to mow
grass is in the late afternoon when the
grass is dry and the newly cut area will not
be exposed to direct sunlight.
2) For best mulching performance, set the
cutting height to remove about one third
of the grass blade length, ideally no more
than 38mm at one time. If the lawn is
overgrown, it may be necessary to increase
the cut height to reduce the pushing effort
and prevent overloading the motor. For
extremely heavy mulching, it is advisable
to first cut at a high cut height setting,
and then re-cut to the final cut height.
Otherwise, make narrower cuts and mow
slowly.
3) For best performance, keep the mower
housing free of built-up grass. From time to
time turn off mower and wait for the blade
to come to a complete stop. Then unplug
the safety key and turn mower on its side.
Using an object such as a stick, wipe out
any accumulation of grass in the blade
area. Be careful of the sharp edges of the
blade. Clean often in wet, new grass, and
always after every use.
4) Certain types of grass or grass conditions
may require that an area be mulched a
second time to fully disperse the grass
throughout the lawn. If cutting a second
time, it is advisable to cut perpendicular
(across) the first cut pattern.
Do not change cut pattern in any way
that would cause mowing down ahill.
5) Change your cutting pattern from week to
week. This will help prevent matting and
graining of the lawn.
MAINTENANCE
WARNING: Stop the mower and
remove the safety key before
removing the grass bag.
NOTE: To ensure long and reliable service,
perform the following maintenance
procedures regularly. Check for obvious
defects such as a loose, dislodged or a
damaged blade, loose fittings, and worn
or damaged components. Check that the
1716
Cordless Lawn mower EN
1716
covers and guards are all undamaged and
are correctly attached to mower. Carry out
any necessary maintenance or repairs before
operating mower. If the mower should
happen to fail despite regular maintenance,
please call our customer helpline for advice.
BLADE SHARPENING
Keep blade sharp for best mower
performance. A dull blade does not cut
grass cleanly or mulch properly.
Wear proper eye protection while
removing, sharpening, and installing
blade. Ensure that safety key is removed.
Sharpening the blade twice during a mowing
season is usually sufficient under normal
circumstances. Sand causes the blade to dull
quickly. If your lawn has sandy soil, more
frequent sharpening may be required.
Replace bent or damaged blade
immediately.
WHEN SHARPENING THE BLADE:
1. Make sure blade remains balanced.
2. Sharpen blade at the original cutting angle.
3. Sharpen cutting edges on both ends of
blade, removing equal amounts of material
from both ends.
TO SHARPEN BLADE IN A VISE (See N)
1. Be sure the switch lever is released, the
blade has stopped and the safety key
removed before removing the blade.
2. Remove blade from mower. See
instructions for removing and attaching
blade.
3. Secure blade N-1 in a vise N-2.
4. Wear safety glasses and be careful not to
cut yourself.
5. Carefully file the cutting edges of the blade
with a fine tooth file N-3 or sharpening
stone.
6. Check balance of blade. See instructions for
blade balancing.
7. Replace blade on mower and tighten
securely. Refer to instructions below.
BLADE BALANCING (See O)
Check balance of blade by placing center hole
in blade O-1 over a nail or screwdriver shank
O-2, clamped horizontally in a vise O-3. If
either
end of the blade rotates downward, file that
end. Blade is properly balanced when neither
end drops.
BLADE MAINTENANCE (See P1, P2)
Renew your metal blade after 50 hours
mowing or 2 years, which ever is the sooner-
regardless of condition.
Follow these procedures to remove and
replace the blade. You will need garden gloves
(not provided) and a spanner wrench (not
provided) to remove the blade. Hold the blade
(16) and unscrew the blade bolt (15) counter-
clockwise using a spanner wrench, and then
remove blade.
To re-assemble, position the blade (16) with
the cutting edges towards the ground. Then
securely tighten the blade bolt (15).
STORAGE: (See Q)
Stop the mower and always remove the
safety key. Clean the exterior of the machine
thoroughly using a soft brush and cloth. Do
not use water, solvents or polishes. Remove
all grass and debris, especially from the
ventilation slots.
Turn the machine on its side and clean the
blade area. If grass cuttings are compacted
in the blade area, remove with a wooden or
plastic implement.
Store the machine in a dry place. Do not place
other objects on top of the machine.
To aid storage, release the handle cam lever,
and rotate or fold the upper handle.
ENVIRONMENTAL
PROTECTION
Waste electrical products should not
be disposed of with household waste.
Please recycle where facilities exist.
Check with your Local Authority or retailer for
recycling advice.
1716
1716
Cordless Lawn mower EN
PLUG REPLACEMENT
(UK & IRELAND ONLY)
If you need to replace the fitted plug then
follow the instructions below.
IMPORTANT
The wires in the mains lead are colored in
accordance with the following code:
Blue = Neutral
Brown = Live
As the colors of the wires in the electrical cord
of this appliance may not correspond with the
colored markings identifying the terminals
in your plug, proceed as follows. The wire
which is colored blue must be connected to
the terminal which is marked with N. The wire
which is colored brown must be connected to
the terminal which is marked with L.
WARNING! Never connect live or
neutral wires to the earth terminal of the
plug. Only fit an approved 13Amp BS1363/A
plug and the correct rated fuse.
NOTE: If a moulded plug is fitted and has to
be removed take great care in disposing of the
plug and severed cable, it must be destroyed
to prevent engaging into a socket.
Connect
Blue to N
(neutral)
Outer sleeve
firmly clamped
Cable grip
Brown L (live)
13 Amp fuse approved
to BS1362
1918
Cordless Lawn mower EN
1918
EC DECLARATION OF
CONFORMITY
We,
POSITEC Germany GmbH
Neuer Höltigbaum 6
22143 Hamburg
Declare that the product
Description
WORX Cordless Lawn Mover
Type WG785E
Function Mowing grass
Complies with the following Directives,
EC Machinery Directive
2006/42/EC
EC Low Voltage Directive
2006/95/EC
EC Electromagnetic Compatibility Directive
2004/108/EC
Noise Emission in the Environment by
Equipment for Use Outdoors Directive
2000/14/EC amended by 2005/88/EC
Conformity assessment procedure as per
Annex VI.
Measured Sound Power Level
80 dB(A) TURBO mode
70 dB(A) QUIET mode
Declared Guaranteed Sound Power Level
93dB(A)
The notified body involved
Name: Intertek Testing & Certification
Ltd
Address: Davy Avenue, Knowlhill, Milton
Keynes, MK5 8NL
Standards conform to,
EN 60335-1 EN 60335-2-77
EN ISO 3744 EN 55014-1
EN 55014-2 EN 61000-3-2
EN 61000-3-3 EN 62233
EN 60335-2-29
The person authorized to compile the technical
file,
Name: Russell Nicholson
Address: Positec Powertools (Europe)
LTD
Pinewood, Chineham Bussiness Park,
Basingstoke, Hampshire, RG24 8AL,
United Kingdom
2009/12/28
Jacky Zhou
POSITEC Quality Manager
1918 1918
Schnurloser Rasenmäher D
1. SCHALTBÜGEL
2. KABELKLEMMEN
3. GRASBEHÄLTERFÜLLSTANDANZEIGE
4. GRAS-SAMMELBEUTEL
5. BETRIEBSMODUSWÄHLER
6. SICHERHEITSSCHLÜSSEL
7. GRIFFOBERTEIL
8. HALTENOCKEN-HEBEL
9. GRIFFUNTERTEIL
10. SICHERHEITSKLAPPE
11. BATTERIEPACK *
12. MOTORABDECKUNG
13. AUFLADEGERÄT *(Siehe A2)
14. MULCH-EINSATZ (Siehe H)
15. BLATTBOLZEN (Siehe P1)
16. SÄGEBLATT (Siehe P1)
*Abgebildetes oder beschriebenes Zubehör gehört teilweise nicht zum Lieferumfang.
2120
Schnurloser Rasenmäher D
2120
TECHNISCHE DATEN
Nennleistung 24V
Schneidradius 40cm
Schnitthöhe 20-70mm
Schneidehöhen-Positionen 6
Grasfangkorb 50L
Batteriekapazität 10Stunden
Batterietyp Säure-Blei
Akkumodell WA3218
Aufladezeit 10-12 Stunden
Ladegerätmodell WA3720
Leistung des Ladegeräts Eingang: AC 220-240V, 50/60Hz,
Ausgang: 29.5V , 1.0A
Gewicht 23kg
LÄRMPEGEL UND VIBRATIONEN
Gewichteter Schalldruck LPA : 80 dB (A)—Turbomodus KPA: 3dB(A)
LPA : 70dB (A)—Leiser Modus KPA: 3dB(A)
Gewichtete Schallleistung LWA: 93dB(A)
Tragen Sie bei einem Schalldruck über einen
Gehörschutz
80dB(A)
Typischer gewichteter Vibrationswert 4.0m/s2 K=1.5m/s2
ACCESSORY
Batterie-Paket 1
Aufladegerät 1
Gras-Sammelbeutel 1
Mulch-Einsatz 1
Haltenocken-Hebel 2
Wir empfehlen Ihnen, sämtliche Zubehörteile beim selben Fachhändler zu beziehen, bei dem
Sie auch Ihr Elektrowerkzeug gekauft haben. Verwenden Sie nur hochwertige Zubehörteile von
namhaften Herstellern. Weitere Informationen finden Sie auf der Verpackung der Zubehörteile.
Auch Ihr Fachhändler berät Sie gerne.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76

Worx WG785E Manuale utente

Categoria
Tosa erba
Tipo
Manuale utente
Questo manuale è adatto anche per