Lexmark X4500 Manuale utente

X4500 Scanner

4036-304

Lexmark and Lexmark with diamond design are

trademarks of Lexmark International, Inc., registered

in the United States and/or other countries.

• Table of Contents

• Problem Solving

• Safety and Notices

• Trademarks

• Index

Edition: March 2002

The following paragraph does not apply to any country where such provisions are inconsistent with local law:

LEXMARK INTERNATIONAL, INC. PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND,

EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or

implied warranties in certain transactions; therefore, this statement may not apply to you.

This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the

information herein; these changes will be incorporated in later editions. Improvements or changes in the products or the

programs described may be made at any time.

Comments may be addressed to Lexmark International, Inc., Department D22A/032-2, 740 West New Circle Road,

Lexington, Kentucky 40550, U.S.A or e-mail at ServiceInfoAndTraining@Lexmark.com. Lexmark may use or distribute any

of the information you supply in any way it believes appropriate without incurring any obligation to you. You can purchase

additional copies of publications related to this product by calling 1-800-553-9727. In other countries, contact your point of

purchase.

Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc., registered in the United States

and/or other countries.

Other trademarks are the property of their respective owners.

©

Copyright Lexmark International, Inc. 2002.

UNITED STATES GOVERNMENT RESTRICTED RIGHTS

This software and documentation are provided with RESTRICTED RIGHTS. Use, duplication or disclosure by the

Government is subject to restrictions as set forth in subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer

Software clause at DFARS 252.227-7013 and in applicable FAR provisions: Lexmark International, Inc., Lexington, KY

40550. U.S.A.

P/N 12G9084

4036-304

iii

4036-304

Table of Contents

Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v

Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

Service Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

Product Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

Ease of Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

Digital Copier and Full-function Fax Machine . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

Network Scanning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

Duplex Scanning through the Auto Document Feeder (ADF) . . . . . . . . . . . . . . 1-2

Product Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

Theory of Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5

System Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5

Mechanical Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5

Scanner Mechanism Overview and Locations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7

External View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7

Internal Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8

Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-9

Problem Solving. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

Error Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

MFD Controller Errors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

Scanner Errors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

Cover and Glass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

Touch Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

ADF Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

Maintenance Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2

Removals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2

Parts Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2

ADF Snap-in Pad Module Removal and Mounting . . . . . . . . . . . . . . . . . . . . . . 3-4

Document Cover Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5

ADF Cover Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5

ADF Optical CCD Unit Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6

ADF Unit (Upper and Lower Unit) Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7

User Interface Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9

Upper Housing Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-12

Flatbed CCD Optical Unit Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-14

Carriage Motor Assembly Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-16

Carriage Belt Pulley Assembly Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-16

MFD Controller Cage Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-16

Product Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

iv

4036-304

Hard Disk Drive, MFD Controller Card, 1394 Communications Card and Power

Distribution Board Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-19

Main Control Board Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-21

Connector Locations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1

Main Scanner Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1

MFD Controller Cage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2

Low Voltage Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2

Parts Catalog. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .I-1

Safety Information v

4036-304

Safety Information

• This product is designed, tested and approved to meet strict global safety standards

with the use of specific Lexmark components. The safety features of some parts may

not always be obvious. Lexmark is not responsible for the use of other replacement

parts.

• The maintenance information for this product has been prepared for use by a

professional service person and is not intended to be used by others.

• There may be an increased risk of electric shock and personal injury during

disassembly and servicing of this product. Professional service personnel should

understand this and take necessary precautions.

Consignes de Sécurité

• Ce produit a été conçu, testé et approuvé pour respecter les normes strictes de

sécurité globale lors de l'utilisation de composants Lexmark spécifiques. Les

caractéristiques de sécurité de certains éléments ne sont pas toujours évidentes.

Lexmark ne peut être tenu responsable de l'utilisation d'autres pièces de rechange.

• Les consignes d'entretien et de réparation de ce produit s'adressent uniquement à

un personnel de maintenance qualifié.

• Le démontage et l'entretien de ce produit pouvant présenter certains risques

électriques, le personnel d'entretien qualifié devra prendre toutes les précautions

nécessaires.

Norme di sicurezza

• Il prodotto è stato progettato, testato e approvato in conformità a severi standard di

sicurezza e per l’utilizzo con componenti Lexmark specifici. Le caratteristiche di

sicurezza di alcune parti non sempre sono di immediata comprensione. Lexmark

non è responsabile per l’utilizzo di parti di ricambio di altri produttori.

• Le informazioni riguardanti la manutenzione di questo prodotto sono indirizzate

soltanto al personale di assistenza autorizzato.

• Durante lo smontaggio e la manutenzione di questo prodotto, il rischio di subire

scosse elettriche e danni alla persona è più elevato. Il personale di assistenza

autorizzato, deve, quindi, adottare le precauzioni necessarie.

vi Service Manual

4036-304

Sicherheitshinweise

• Dieses Produkt und die zugehörigen Komponenten wurden entworfen und getestet,

um beim Einsatz die weltweit gültigen Sicherheitsanforderungen zu erfüllen. Die

sicherheitsrelevanten Funktionen der Bauteile und Optionen sind nicht immer

offensichtlich. Sofern Teile eingesetzt werden, die nicht von Lexmark sind, wird von

Lexmark keinerlei Verantwortung oder Haftung für dieses Produkt übernommen.

• Die Wartungsinformationen für dieses Produkt sind ausschließlich für die

Verwendung durch einen Wartungsfachmann bestimmt.

• Während des Auseinandernehmens und der Wartung des Geräts besteht ein

zusätzliches Risiko eines elektrischen Schlags und körperlicher Verletzung. Das

zuständige Fachpersonal sollte entsprechende Vorsichtsmaßnahmen treffen.

Pautas de Seguridad

• Este producto se ha diseñado, verificado y aprobado para cumplir los más estrictos

estándares de seguridad global usando los componentes específicos de Lexmark.

Puede que las características de seguridad de algunas piezas no sean siempre

evidentes. Lexmark no se hace responsable del uso de otras piezas de recambio.

• La información sobre el mantenimiento de este producto está dirigida

exclusivamente al personal cualificado de mantenimiento.

• Existe mayor riesgo de descarga eléctrica y de daños personales durante el

desmontaje y la reparación de la máquina. El personal cualificado debe ser

consciente de este peligro y tomar las precauciones necesarias.

Informações de Segurança

• Este produto foi concebido, testado e aprovado para satisfazer os padrões globais

de segurança na utilização de componentes específicos da Lexmark. As funções de

segurança de alguns dos componentes podem não ser sempre óbvias. A Lexmark

não é responsável pela utilização de outros componentes de substituição.

• As informações de segurança relativas a este produto destinam-se a profissionais

destes serviços e não devem ser utilizadas por outras pessoas.

• Risco de choques eléctricos e ferimentos graves durante a desmontagem e

manutenção deste produto. Os profissionais destes serviços devem estar avisados

deste facto e tomar os cuidados necessários.

Safety Information vii

4036-304

Informació de Seguretat

• Aquest producte està dissenyat, comprovat i aprovat per tal d'acomplir les estrictes

normes de seguretat globals amb la utililització de components específics de

Lexmark. Les característiques de seguretat d'algunes peces pot ser que no sempre

siguin òbvies. Lexmark no es responsabilitza de l'us d'altres peces de recanvi.

• La informació pel manteniment d’aquest producte està orientada exclusivament a

professionals i no està destinada a ningú que no ho sigui.

• El risc de xoc elèctric i de danys personals pot augmentar durant el procés de

desmuntatge i de servei d’aquest producte. El personal professional ha d’estar-ne

assabentat i prendre les mesures convenients.

viii Service Manual

4036-304

Overview 1-1

4036-304

1. Overview

This manual is for maintenance engineers. It describes the maintenance areas,

installation, disassembly, and the main troubleshooting guides.

Take your time to read this manual thoroughly to obtain comprehensive knowledge about

the scanner before servicing the unit.

Service Guidelines

1. Before disassembling the scanner, make sure the power supply cord is disconnected

from the power outlet. Do not remove or install the connectors on the scanner with

the power supply turned ON.

2. Use caution not to drop small parts or screws inside the unit when disassembling

and reassembling.

3. Do not pull the connector cable when disconnecting it. Hold the connector.

4. When carrying the scanning head unit, put it in an anti-static bag.

5. Keep the document glass platen surface clean with a dry clean lint free cloth.

Product Description

The 4036-304 Scanner is a multifunction solution that offers integrated print, copy, fax

and color network-scanning capabilities for increased small workgroup productivity. The

scanner is easy to use and provides low-cost access to key office functions, including fax

from workstation, network color copying, scanning, and electronic document routing.

Give your document to the scanner, and in a few steps, it scans to the network and

delivers it wherever, to whomever you want. With this scanner, inefficient trips to the

mailroom, copier, fax machine and to your workstation are a thing of the past.

Product Features

Ease of Use

The user interface on the front of the scanner looks like a panel on a copier with standard

phone keys added. The operating steps follow the same procedure as that of a copier or

fax machine.

1-2 Service Manual

4036-304

Digital Copier and Full-function Fax Machine

When the scanner is connected to a Lexmark printer, it performs convenient digital

copying. When connected to telephone line, the scanner performs a full fax function - to

send and to receive faxes.

Network Scanning

The scanner uses two Color Charge-Coupled Devices (CCD) when scanning. Through a

network port at the rear of the scanner, the product is able to do network scanning.

Duplex Scanning through the Auto Document Feeder (ADF)

To increase workgroup productivity, the scanner uses the advance duplex scanning

capability. The scan speed limit is 20 ppm at 300 dpi resolution. The auto document

feeder can hold up to 50 pages at one time.

Overview 1-3

4036-304

Product Specifications

The scanner is designed to meet the following product specifications:

Scanner

Scanner Type Flatbed Scanner with ADF built in

Optical Resolution Flatbed: 300x600 dpi

ADF: 300x300 dpi

Enhanced Resolution 9600x9600 dpi

Scan Speed 10 ppm at 300 dpi color for single page scanning

20 ppm at 300 dpi line-art, duplex for ADF

Scan Method Color Charge-Coupled Device (CCD)

Light Source Cold Cathode Fluorescent Lamp (CCFL)

CPU Arm 7 KS32C41000

Scan Area Max. 8.5 x 14.0 inch (legal size) for ADF

Display 640x480 color VGA touch screen

Image Types 42-bit color (internal)

14-bit gray (internal)

1-bit line-art, Dither, Error Diffusion

Scan Accuracy Flatbed ADF

1. Leading Edge <-1 ~ +2 mm <2.5 ~ +2.5 mm

2. Side Edge <-1 ~ +2 mm <2.5 ~ +2.5 mm

3. Skew <1 mm <2 mm

4. Magnification Rate

Tolerance (Horizontal

and Vertical)

-1.5% ~ +1.5% -1.5% ~ +1.5%

Physical Dimension Width: 570 mm Depth: 430 mm Height: 315 mm

Weight 14 kg

1-4 Service Manual

4036-304

Environment:

-Operating

-Storage

10°C to 35°C (50°F to 95°F)

20% to 80% RH (Relative Humidity)

-40°C to 65°C (-40°F to 149°F)

10% to 90% RH (Relative Humidity)

Random Vibration:

-Unpacked non-op

-Package

-Bump

-Drop

10-200Hz, 0.005 p.s.d. (G^2/Hz)

5-200Hz, 0.015 p.s.d. -6 dB/oct

One hour in 3 major axes

Severity: 25g/6ms, 1000 times in each direction

Must meet NSTA specification

Drop Point: 1 corner, 3 edges and 6 surfaces

Total 10 times

Acoustic Noise Operating: 58 dB or less

Electrostatic Discharge EC 1000-4-2 ESD Standard

Safety Regulation UL, CSA, TUV/GS, SEMKO

EMC regulation FCC Part 15 Subchapter J Class A

CE Marking, C-Tick

ADF

General Specifications:

-Optical Resolution

-Document Capacity

300x300 dpi

50 sheets

Document:

-Document Size

-Thickness

Max. 8.5 x 14 inch (W x L)

Min. 4.5 x 5.5 inch (W x L)

0.05~0.15 mm

Overview 1-5

4036-304

Theory of Operation

System Description

The Lexmark X4500 is a duplexing scanner option which can synchronously scan both

the top and bottom sides of a document in color. The major system components include a

main scanner control board, an automatic document feeder, flatbed, two optical CCD

modules (one in ADF, one in flatbed), a user interface with a touch screen panel and a

multifunction device controller cage located within the base of the scanner. The MFD

controller cage includes a 1394 communications card to communicate with the main

scanner board, a MFD controller board to process all jobs performed on the X4500, a

hard disk drive containing the operational code for the system and providing memory for

processing jobs, and a power distribution board. An external power supply provides 5, 12,

and 24 V dc to the entire scanner system.

The following figure shows the system block diagram.

Mechanical Operation

Flatbed Operation

When scanning, place the document on the flatbed glass platen, the flatbed optical unit/

carrier moves across the underside of the glass, and scans the document. A charge-

coupled device (CCD) mounts to the carrier and optically reads the image from the page.

The carrier is driven by a 2-phase stepping motor which moves the carriage at 1/300 inch

each step.

1-6 Service Manual

4036-304

Auto Document Feeder Operation

When using the Auto Document Feeder (ADF) mechanism, a page is fed into the ADF by

a pick roller and through the ADF by a feed roller. A separation pad located opposite to

the pick roller is used to properly feed the pages one at a time when placed on the input

tray. The flatbed optical unit/carrier is positioned to the far left so when the paper passes

through the ADF, the bottom side of the page is scanned by the flatbed CCD. The home

position sensor detects when the carrier is in the proper position for ADF scanning. In

addition, an ADF cover open sensor detects when the upper ADF assembly is open or

closed into proper operating position. The scanner cannot operate when this sensor is

open.

While the page is fed through and scanned from the bottom via the flatbed CCD, the top

side of the page is simultaneously scanned via a CCD unit positioned within the ADF unit.

As the page feeds between the two CCD units, the page discharges to the exit tray on the

left side of the ADF.

Overview 1-7

4036-304

Scanner Mechanism Overview and Locations

This section contains an overview of the major components of the scanner hardware.

External View

1-8 Service Manual

4036-304

Internal Components

Overview 1-9

4036-304

Abbreviations

ADF Auto Document Feeder

CCD Charge-Couple Device

CCFL Cold Cathode Fluorescent Lamp

CDB Command Descriptor Blocks

DMM Digital Multimeter

LED Light Emitting Diode

MFD Multi Function Device

PCBA Printed Circuit Board Assembly

UI User Interface

1-10 Service Manual

4036-304

Problem Solving 2-1

4036-304

2. Problem Solving

This chapter describes two methods to solve the operational problems. The first relies on

the scanner internal diagnostics to report error codes. The second uses troubleshooting

techniques to isolate the problem. In many cases, the internal error codes will help you to

locate the source of the problem quickly. If no error codes are reported, or if the error

codes do not locate the source of the problem, refer to the troubleshooting section.

Error Codes

MFD Controller Errors

MFD Controller Errors are errors detected by the MFD controller card within the MFD

cage pertaining to electronic cards. All MFD controller cage errors are posted to the user

interface touch screen along with audible beep codes and LED codes (visible on the

lower left side of the MFD controller card). During the Power-On Self Test procedure,

errors detected cause a number of audible beeps to be produced three times. The

corresponding LED pattern continuously displays on the controller card until the system is

powered down. Use the following tables to read the beep/LED codes and follow the

recommended repair action.

There are two rows of four LEDs. The LEDs are visible with the MFD controller cage

detached from the scanner. The LED pattern depicts which LEDs are illuminated in the

two rows. Use caution when removing the cage from the scanner while the system is

powered up.

Error

Number

of

Beeps

LED Pattern

Error Message

Displayed to UI

Action

21 2 Modem not found Modem on the MFD

controller card is not

found. Replace the

MFD controller board.

22 2 PCI Bus failure Replace the MFD

controller board.

24 2 Serial Port failure Problem with TTY/

Serial Port. Replace the

MFD controller board.

2-2 Service Manual

4036-304

28 2 Problem with the CPU Replace the MFD

controller board.

31 3 (No Hard Drive Found)

Note: Error code

message not displayed

on the user interface.

Only beep code and

LED patterns are

generated for this error.

Check connections to

the hard disk drive and

associated cables for

continuity. Check power

going to the hard disk

drive. Replace the

power distribution card

if no power is present. If

power is present,

replace the hard disk

drive.

32 3 (Missing OS)

Note: Error code

message not displayed

on the user interface.

Only beep code and

LED patterns are

generated for this error.

The OS is not found.

Replace or reformat the

hard drive.

34 3 Hard Drive failure There was an error

writing to the hard drive

or the OS is corrupt.

Replace or reformat the

hard disk drive.

41 4 Scanner Interface not

found

The scanner image

processing board was

not found. Check

connections to the

interface board. If

connections are good,

replace the 1394

communications board.

51 5 (No Memory)

Note: Error code

message not displayed

on the user interface.

Only beep code and

LED patterns are

generated for this error.

The memory DIMM was

not detected or not

functioning. Replace

the memory DIMM.

Error

Number

of

Beeps

LED Pattern

Error Message

Displayed to UI

Action

La pagina sta caricando ...

Lexmark X4500 Manuale utente

Lexmark X4500 Manuale utente

in altre lingue

Documenti correlati

Altri documenti