ENGLISH 14
Cleaning and maintenance
CLEANING
WARNING!
- Never use steam cleaning equipment.
- Only clean the oven when it is cool to
the touch.
- Disconnect the appliance from the
power supply.
Oven exterior
IMPORTANT: do not use corrosive or
abrasive detergents. If any of these
products accidentally comes into contact
with the appliance, clean immediately with
a damp cloth.
• Clean the surfaces with a damp cloth.
If it is very dirty, add a few drops of
washing up detergent to the water.
Finish off with a dry cloth.
Oven interior
IMPORTANT: do not use abrasive
sponges or metallic scrapers or
scourers. Over time, these can ruin
enamelled surfaces and the oven door
glass.
• After every use, allow the oven to cool
then clean it preferably while it is still
warm in order to remove built-up dirt
and stains caused by food residues (e.g.
food with a high sugar content).
• Use proprietary oven detergents and
follow the manufacturer’s instructions to
the letter.
• Clean the door glass with a suitable
liquid detergent. The oven door can
be removed to facilitate cleaning (see
MAINTENANCE). Inner glass is smooth
to facilitate cleaning.
NOTE: during prolonged cooking of foods
with a high water content (e.g. pizza,
vegetables, etc.) condensation may form on
the inside of the door and around the seal.
When the oven is cold, dry the inside of the
door with a cloth or sponge.
Accessories
• Soak the accessories in water with
washing up detergent immediately after
use, handling them with oven gloves if
still hot.
• Food residues can be easily removed
using a brush or sponge.
Cleaning cycle of ovens with Pyrolytic
function:
WARNING!
• Do not touch the oven during the
pyrolysis cycle.
• Keep children away from the oven
during the pyrolysis cycle.
This function burns off spatters produced
inside the oven during cooking at a
temperature of approx. 500°C. At this high
temperature, the deposits turn into a light
ash which can be easily wiped away with
a damp cloth, when the oven is cool. Do
not select the pyrolysis function after every
use, only when the oven is very dirty or
produces smoke or fumes while preheating
or cooking.
• If the oven is installed below a hob,
make sure that all burners or electric
hotplates are switched off during the
self-cleaning (pyrolysis) function.
• Remove all accessories before running
the pyrolysis function.
• Ensure large food particles and stains
are removed from the door glass before
starting the pyro cycle
• The appliance could be equipped with
pyrolysis function:
Standard cycle (PYRO): which is suitable
for cleaning a very dirty oven.
NOTE: during the pyrolysis function, the
oven door will not open; it will remain
locked until the temperature inside the oven
has returned to an acceptably safe level.