Kenwood KDV-S220P Manuale utente

KDV-S220P

DVD PLAYER

INSTRUCTION MANUAL

LECTEUR DE DVD

MODE D’EMPLOI

DVD-Player

BEDIENUNGSANLEITUNG

DVD-SPELER

GEBRUIKSAANWIJZING

LETTORE DVD

ISTRUZIONI PER L’USO

REPRODUCTOR-DVD

MANUAL DE INSTRUCCIONES

LEITOR DE DVD

MANUAL DE INSTRUÇÕES

2

|

English

Contents

Safety precautions 3

Before Use 4

Notes on playing MP3 6

About the remote 7

About discs 8

Basic features 9

Power

Play

Mute

Skip

Fast Forward and Reverse

Repeat Play

A-B Repeat Play [DVD][VCD][CD]

Switching Display

DVD Video/Video CD features 12

Search Play

Slow Motion play

DVD menu/Top (title) menu [DVD]

Audio Language select [DVD]

Subtitle Language select [DVD]

Picture Angle select [DVD]

Zoom [DVD]

PBC [VCD]

Digest Screen [DVD]

CD/MP3 features 15

MP3 Folder List [MP3]

Program Play

Direct Skip Play

Play Time Search [CD]

MP3 Play Mode [MP3]

Random Play

Setup menu 18

Setup menu

General Setup

Speaker Setup

Audio setup

Preferences

Accessories 22

Installation 22

Connecting Wires to Terminals 23

Troubleshooting Guide 24

Specifications 25

[DVD]: Function of during DVD playback only.

[VCD]: Function of during Video CD playback only.

[CD]: Function of during CD playback only.

[MP3]: Function of during MP3 playback only.

English

|

3

Safety precautions

Restrictions due to difference between

discs

Some DVD and VCD discs can be

played only in certain playback

modes according to the intentions

of the software producers. As this

player plays discs according to their

intentions, some functions may not

work as intended by you. Please be sure to read

the instructions provided with each disc. When

an inhibition icon is displayed on the monitor, it

indicates that the disc being played is under the

restriction as described above.

Lens Fogging

Right after you turn on the car heater in cold

weather, dew or condensation may form on

the lens in the CD player of the unit. Called lens

fogging, CDs may be impossible to play. In such

a situation, remove the disc and wait for the

condensation to evaporate. If the unit still does

not operate normally after a while, consult your

Kenwood dealer.

Cleaning the Unit

If the faceplate of this unit is stained, wipe it with a

dry soft cloth such as a silicon cloth.

If the faceplate is stained badly, wipe the stain off

with a cloth moistened with neutral cleaner, then

wipe neutral detergent off.

• Applying spray cleaner directly to the unit may affect its

mechanical parts. Wiping the faceplate with a hard cloth

or using a volatile liquid such as thinner or alcohol may

scratch the surface or erases characters.

2WARNING

To prevent injury or fire, take the

following precautions:

• Insert the unit all the way in until it is fully locked

in place. Otherwise it may fall out of place when

jolted.

• To prevent a short circuit, never put or leave any

metallic objects (such as coins or metal tools)

inside the unit.

• If the unit starts to emit smoke or strange smells,

turn off the power immediately and consult your

Kenwood dealer.

• Do not connect the unit to the front monitor. This

unit is for rear seat entertainment.

• Do not use any power cable other than the

accessory. This could cause fire.

2CAUTION

To prevent damage to the machine, take

the following precautions:

• Make sure to ground the unit to a negative 12V

DC power supply.

• Do not open the top or bottom covers of the unit.

• Do not install the unit in a spot exposed to direct

sunlight or excessive heat or humidity. Also avoid

places with too much dust or the possibility of

water splashing.

• Do not use your own screws. Use only the screws

provided. If you use the wrong screws, you could

damage the unit.

• When replacing a fuse, only use a new one with

the prescribed rating. Using a fuse with the wrong

rating may cause your unit to malfunction.

NOTE

• If you experience problems during installation,

consult your Kenwood dealer.

• The illustrations of the display and the panel

appearing in this manual are examples used to

explain more clearly how the controls are used.

Therefore, what appears on the display in the

illustrations may differ from what appears on

the display on the actual equipment, and some

of the illustrations on the display may represent

something impossible in actual operation.

• If the unit fails to operate properly, turn the power

off and then on. If the unit still fails to operate

properly after the power has been turned off

and on, contact your local Kenwood dealer for

assistance.

Inhibition

icon

4

|

English

Region codes in the world

Icons on the DVD discs

Icon Description

Indicates the region code where the disc can be played.

8

Number of voice languages recorded with the audio function. The number in the

icon indicates the number of voice languages. (Max. 8 languages)

32

Number of subtitle languages recorded with the subtitle function. The number in the

icon indicates the number of subtitle languages. (Max. 32 languages)

9

Number of angles provided by the angle function. The number in the icon indicates

the number of angles. (Max. 9 angles)

16:9 LB

Aspect ratios that can be selected. "LB" stands for Letter Box and “PS” for Pan/Scan. In

the example on the left, the 16:9 video can be converted into letter box video.

Playable discs

• DVD-Video

• Audio Disc (CD)

• MP3 format Disc (CD)

• CD-R/RW format Disc

• Video CD Disc

Also, you cannot play back the DVD-R discs if not recorded in the DVD-Video format.

About the usable temperatures

The protective circuit in the unit activates when the temperature inside the DVD player exceeds 60°C

(140°F). Refer to Trouble Shootiing Guide (p 24).

Before Use

1

2

4

1

5

4

5

2

1

2

6

3

English

|

5

The marking of products using lasers

(Except for some areas)

CLASS 1

LASER PRODUCT

The label is attached to the chassis/case and

says that the component uses laser beams that

have been classified as Class 1. It means that the

unit is utilizing laser beams that are of a weaker

class. There is no danger of hazardous radiation

outside the unit.

is a trademark of DVD Format/Logo

Licensing Corporation registered in the U.S.,

Japan and other countries.

Manufactured under license from Dolby

Laboratories.

"Dolby" and the double-D symbol are

trademarks of Dolby Laboratories.

This product incorporates copyright protection

technology that is protected by U.S. patents

and other intellectual property rights. Use of

this copyright protection technology must be

authorized by Macrovision, and is intended

for home and other limited viewing uses only

unless otherwise authorized by Macrovision.

Reverse engineering or disassembly is

prohibited.

This Product is not installed by the manufacturer

of a vehicle on the production line, nor by the

professional importer of a vehicle into an EU

Member State.

6

|

English

Notes on playing MP3

KDV-S220P can play MP3 (MPEG1, 2 Audio Layer 3).

Note, however, that the MP3 recording media and

formats acceptable are limited. When writing MP3,

pay attention to the following restrictions.

Acceptable media

The MP3 recording media acceptable to this unit

are CD-ROM, CD-R, and CD-RW.

When using CD-RW, do full format not quick format

to prevent malfunction.

Acceptable medium formats

The following formats are available for the media

used in this unit. The maximum number of

characters used for file and folder name including

the delimiter (".") and three-character extension are

indicated in parentheses.

• ISO 9660 Level 1 (12 characters; Up to 11

characters are displayed)

• ISO 9660 Level 2 (31 characters; Up to 11

characters are displayed)

• Joliet (64 character; Up to 11 characters are

displayed)

• Romeo (128 character; Up to 11 characters are

displayed)

• Long file name (200 characters; Up to 11

characters are displayed)

• Maximum number of characters for folder name:

128 (Up to 11 characters are displayed)

For a list of available characters, see the instruction

manual of the writing software and the section

Entering file and folder names below.

The media reproducible on this unit has the

following limitations:

• Maximum number of directory levels: 8

• Maximum number of files per folder: 185

• Maximum number of folders: 127

MP3 written in the formats other than the above

may not be successfully played and their file names

or folder names are not properly displayed.

Settings for your MP3 encoder and CD

writer

Do the following setting when compressing audio

data in MP3 data with the MP3 encoder.

• Transfer bit rate: 56 – 320 kbps

• Sampling frequency

: 11.025, 12, 16, 22.05, 24, 32, 44.1, 48 kHz

When you use your CD writer to record MP3 up

to the maximum disc capacity, disable additional

writing. For recording on an empty disc up to the

maximum capacity at once, check Disc at Once.

ID3 tag display

The ID3 tag cannot be displayed.

Entering file and folder names

The code list characters are the only file names and

folder names that can be entered and displayed.

If you use any other character for entry, the file and

folder names are not displayed correctly. They may

neither be displayed correctly depending on the CD

writer used.

The unit recognizes and plays only those MP3

which have the MP3 extension (.MP3).

0123456789ABCDEF

00@P‘p

1!1AQaq

22BRbr

3#3CScs

4$4DTdt

5%5EUeu

6&6FVfv

7’7GWgw

8(8HXhx

9)9IYiy

AJZjz

B+;K[k{

C,Ll

D -=M]m}

E . N^n~

FO_o

• A file with a name entered with characters not on the

code list may not play correctly.

Writing files into a medium

When a medium containing MP3 data is loaded,

the unit checks all the data on the medium. If the

medium contains a lot of folders or non-MP3 files,

therefore, it takes a long time until the unit starts

playing MP3.

In addition, it may take time for the unit to move to

the next MP3 file or a File Search or Folder Search

may not be performed smoothly.

Loading such a medium may produce loud noise to

damage the speakers.

• Do no attempt to play a medium containing a non-MP3

file with the MP3 extension.

The unit mistakes non-MP3 files for MP3 data as long as

they have the MP3 extension.

• Do not attempt to play a medium containing non MP3.

English

|

7

MP3 playing order

When selected for play or Skip, files and folders are

accessed in the order in which they were written by

the CD writer.

Because of this, the order in which they are

expected to be played may not match the order

in which they are actually played. You may be able

to set the order in which MP3 are to be played by

writing them onto a medium such as a CD-R with

their file names beginning with play sequence

numbers such as "01" to "99", depending on your

CD writer.

Loading the battery

1. Use two "AAA"-size batteries.

Remove the cover as illustrated.

2. Insert the batteries with the + and - poles aligned

properly, following the illustration inside the case.

2WARNING

• Store unused batteries out of the reach of

children. Contact a doctor immediately if the

battery is accidentally swallowed.

• Do not put the remote in a place where it moves

when you drive. If it falls under the brake pedal,

etc., it will hinder your driving, causing danger.

• Do not set the remote on hot places such as above the

dashboard.

• The provided batteries are intended for use in operation

checking, and their service life may be short.

• When the remote controllable distance becomes short,

replace both of the batteries with new ones.

About the remote

8

|

English

Handling discs

• Don’t touch the recording surface of the disc.

• CD-R/RW and DVD-R are easier to damage than a

normal music CD. Use a CD-R/RW or a DVD-R after

reading the caution items on the package etc.

• Don’t stick tape etc. on the disc.

Also, don’t use a disc with tape stuck on it.

When using a new disc

If the disc center hole or outside rim has burrs, use

it after removing them with a ball pen etc.

Disc accessories

Don’t use disc type accessories.

Disc cleaning

Clean from the center of the disc and move

outward.

About discs

Burrs

Removing discs

When removing discs from this unit pull them out

horizontally.

Discs that can’t be used

• Discs that aren’t round can’t be used.

• Discs with coloring on the recording surface or

that are dirty can’t be used.

• This unit can only play the CDs with

.

It may not correctly play discs which do not have

the mark.

• A CD-R or CD-RW that hasn’t been finalized can’t

be played. (For the finalization process refer to

your CD-R/CD-RW writing software, and your CD-

R/CD-RW recorder instruction manual.)

Disc storage

• Don’t place them in direct sunlight (On the seat

or dashboard etc.) and where the temperature is

high.

• Store discs in their cases.

English

|

9

Basic features

Power

Press the [POWER] button.

• Unplug the cigarette lighter plug when you turn

off the ignition in order to prevent the battery from

running out.

POWER EJECT

DISPLAY

MUTE

A–B

REPEAT

4/¢

38

1

/¡

7

10

|

English

Basic features

Play

Open the cover and insert a disc into the unit.

If a disc has been inserted, press the [38]

button.

To play back MP3 when 'FOLDER LIST' is set to

"WITH MENU", refer to 'MP3 Folder List' (page 15)

to select the file you want to play back.

Starts playing the disc.

• If you insert a disc, it will start playing from the

beginning of the disc.

If you turn the power off while playing a disc, turning

the power back on will resume playing the disc where

it stopped.

Pause

Press the [38] button.

Each time the button is pressed, it pauses or

plays.

Stop

Press the [7] button.

To restart playback, press the [38] button.

• If you press the [7] button twice during DVD

playback, it starts from the beginning of the disc next

time you play it.

Eject

Press the [EJECT] button.

• If you want to restart playback with the disc ejected

from the unit, press the [EJECT] button again. The disc

is inserted into the unit, and playback is restarted.

Mute

Turning the volume down quickly.

Press the [MUTE] button.

Each time the button is pressed, the Mute turns

ON or OFF.

Skip

Skips a chapter, select, track or song.

Press the [4] or [¢] button.

• To skip on a VCD, turn the PBC function off by pressing

the [PBC] button.

Fast Forward and Reverse

Press the [1] or [¡] button.

The speed changes at 4 levels (X2, X4, X6, X8)

each time the button is pressed.

To restart playback, press the [38] button.

Repeat Play

Plays a song, a chapter, a title, etc. repeatedly.

Press the [REPEAT] button.

Each time the button is pressed, the Repeat Play

function switches as shown below.

In DVD source

Display Setting

"CHAPTER REPEAT ON" Plays the chapter repeatedly.

"TITLE REPEAT ON" Plays the title repeatedly.

"REPEAT OFF" Turns Repeat Play off.

In CD/VCD source

Display Setting

"REP-ONE" Plays the track repeatedly.

"REP-ALL" Plays the disc repeatedly.

"REPEAT OFF" Turns Repeat Play off.

In MP3 source

Display Setting

"REP-ONE" Plays the song repeatedly.

"FOLDER-REP"/ "REP-ALL" Plays the songs in the folder repeatedly.

"FOLDER"/ "REPEAT OFF" Turns Repeat Play off.

• To repeat play a VCD, turn the PBC function off by

pressing the [PBC] button.

English

|

11

A-B Repeat Play [DVD][VCD][CD]

Specify the Start and End points to play the

portion between the specified points repeatedly.

1 Specify Point A (Start point)

Press the [A-B] button.

2 Specify Point B (End point)

Press the [A-B] button.

Plays from Point A to Point B repeatedly.

Canceling A-B Repeat

Press the [A-B] button.

Switching Display

Switches the information displayed on the

monitor screen.

Press the [DISPLAY] button.

Each time the button is pressed, the display

switches as shown below.

In DVD source

Display Information

"TITLE CHAPTER" Title / chapter elapsed time

"TITLE REMAIN" Title remaining time

"CHAPTER ELAPSED" Chapter elapsed time

"CHAPTER REMAIN" Chapter remaining time

"OFF" Not displayed

In VCD (with PBC on) /MP3 source

Display Information

"SINGLE ELAPSED" Song elapsed time

"SINGLE REMAIN" Song remaining time

"OFF" Not displayed

In VCD (with PBC off) /CD source

Display Information

"SINGLE ELAPSED" Track elapsed time

"SINGLE REMAIN" Track remaining time

"TOTAL ELAPSED" Disc elapsed time

"TOTAL REMAIN" Disc remaining time

"OFF" Not displayed

12

|

English

DVD Video/Video CD features

Search Play

Directly calls the scene you want to play.

1 Enter the Search mode

Press the [SEARCH] button.

• To search play a VCD, turn the PBC function off by

pressing the [PBC] button.

2 For DVD, select the Search mode

Press the [SEARCH] button.

Each time the button is pressed, the item that

can be called switches as shown below.

Item

Chapter number

Play time

• If you press the [2] or [3] button during the

Chapter Number Search mode, you can search for a

title number.

3 Enter the scene you want to play

Press the [0] – [9] button.

Starts playing the scene you entered during VCD

playback.

4 For DVD, start Search Play

Press the [ENTER] button.

Starts playing the scene you entered.

Slow Motion play

Press the [2

I] or [I

3] button.

Each time the button is pressed, it plays in slow

motion as shown below.

Disc Button Movement

DVD

2

I

The speed of slow reverse changes in order of

2X, 4X and 8X.

DVD

I

3

The speed of slow forward changes in order of

2X, 4X and 8X.

VCD

2

I

Reverses by one step.

VCD

I

3

The speed of slow forward changes in order of

1X, 2X and 3X.

• To return to the normal speed, press the [38] button.

0–9

SEARCH

MENU

ZOOM

TOP MENU

PBC

ENTER

SUB TITLE

ANGLE

AUDIO

English

|

13

DVD menu/Top (title) menu [DVD]

Calls the DVD menu and the Top (title) menu to

set up various settings.

1 Display the DVD menu

Press the [MENU] button.

Display the Top (title) menu

Press the [TOP MENU] button.

2 Select the item

Press the [2]/[5]/[3]/[∞] or [0] – [9] button.

3 Finalize the item

Press the [38] button.

Refer to the disc manual for instructions on using

each menu.

4 Cancel the menu display

Press the [MENU] or [TOP MENU] button.

Audio Language select [DVD]

Press the [AUDIO] button.

Switches the languages recorded on the disc in

order.

• If no more than one language is recorded on the disc,

it does not switch.

Subtitle Language select [DVD]

Press the [SUB TITLE] button.

Switches the languages recorded on the disc in

order.

• If no more than one language is recorded on the disc,

it does not switch.

Picture Angle select [DVD]

Press the [ANGLE] button.

Switches the angles recorded on the disc in

order.

• If no more than one angle is recorded on the disc, it

does not switch.

Zoom [DVD]

Zooms the image.

1 Select the zoom ratio

Press the [ZOOM] button.

Each time the button is pressed, the zoom ratio

changes at 3 levels (X1.5, X2, X3).

2 Select the displaying position

Press the [2]/[5]/[3]/[∞] button.

PBC [VCD]

Uses the playback control (PBC) function.

1 Turn the PBC function on

Press the [PBC] button.

Each time the button is pressed, the PBC function

turns ON or OFF.

2 Select the item

Press the [0] – [9] button.

3 Finalize the item

Press the [38] button.

Refer to the disc manual for instructions on using

PBC.

• You can use the PBC function when playing a VCD of

Ver2.0 or higher.

14

|

English

DVD Video/Video CD features

Digest Screen [DVD]

Displays the chapters of a title to call the scene

you want to see.

1 Enter Title Information

Press the [PBC] button.

2 Select Title

Press the [2] or [3] button.

• Press the [1] or [¡] button to change 10 titles at a

time.

• Press the [4] or [¢] button to switch to the first

or last title.

3 Play Title

Press the [ENTER] button.

Selecting Scene

4 Stop play

Press the [7] button.

5 Display Digest Screen

Press the [MENU] button.

• Press the [7] button to return to the previous screen.

6 Play the scene you want to see

Press the [1] – [9] button.

Press the [1] – [9] button corresponding to the

number displayed on the Digest screen.

• Press the [4] or [¢] button to go to the previous

or next page.

7 Play the scene you selected

Press the [ENTER] button.

• Press the [7] button to return to the previous screen.

Canceling Digest Screen

Press the [PBC] button.

• Some titles or chapters may not be displayed. In this

case, the previous screen will be displayed.

English

|

15

CD/MP3 features

MP3 Folder List [MP3]

Select the foler or file you want to play back.

1 Stop playback

Press the [7] button.

2 Move the cursor to the Folder List

Press the [2]/[3] button.

Folder List

File List

3 Select the folder

Press the [5]/[∞] button.

4 Finalize your selection

Press the [ENTER] button.

5 Select the file

Press the [5]/[∞] button.

• Press the [4] or [¢] button to scroll the list up or

down.

6 Play back the selected file

Press the [ENTER] button.

0–9

SEARCH

ENTER

RANDOM

PROG

38

7

16

|

English

CD/MP3 features

Program Play

Plays the selected songs only in order.

1 Stop playback

Press the [7] button.

2 Enter the Program mode

Press the [PROG] button.

Switches "PLAY MODE" displayed at the bottom

of the screen to "PROGRAM PO" during MP3

playback.

3 Select the song you want to play

Press the [2]/[5]/[3]/[∞] (during MP3

playback only) or [0] – [9] button.

Specifies the file containing the song you want

to play.

4 Finalize the song you want to play

Press the [ENTER] button.

The song selected in Step 3 is registered as

Program number 1.

5 Repeat Steps 3 and 4 to register all the songs

you want to program play.

For MP3, if you have finished programming, press

the [7] button to exit the Program mode.

6 Start Program Play

Press the [38] button.

Plays the registered songs in order.

Canceling Program Play for CD

Press the [7], [PROG] and [ENTER] buttons in

order.

Canceling Program Play for MP3

Press the [7] and [PROG] buttons in order.

Direct Skip Play

Directly calls the song you want to play.

1 Enter the Track, File, or Folder number you

want to play

Press the [0] – [9] button.

2 Play

Press the [ENTER] button.

• If you do not perform the operation of Step 2 for

about 5 seconds, the song entered in Step 1 is

automatically searched for.

Play Time Search [CD]

Enter the play time to start from where you want.

1 Enter the Play Time Search mode

Press the [SEARCH] button.

2 Enter the play time where you want to start

Press the [0] – [9] button.

For example

5:07 ➪ [0], [5], [0], [7]

Starts playing from the time you entered.

English

|

17

MP3 Play Mode [MP3]

Select the play method.

1 Stop playback

Press the [7] button.

2 Highlight the Play mode button

Press the [2]/[3] button.

Play mode button

3 Select the play method

Press the [5]/[∞] button.

You can select the play method as shown below.

Display Setting

"SINGLE" Stops after playing one song.

"REP-ONE" Plays one song repeatedly.

"FOLDER" Stops after playing the songs in the folder.

"FOLDER REP" Plays the songs in the folder repeatedly.

"DISC SCAN" Plays approximately the first 10 seconds of each

song on the disc.

"DISC" Stops after playing the songs on the disc.

"DISC REP" Plays the songs on the disc repeatedly.

"RANDOM" Plays the songs in the folder in random order.

"SHUFFLE ON" Stops after playing the songs in the folder in

random order.

4 Select the song(s)

Press the [2]/[5]/[3]/[∞] button.

Select the file or folder you want to play.

5 Play

Press the [ENTER] button.

Plays the song(s) in the selected play method.

Random Play

Songs are chosen from those recorded on the

disc opened at random and are played.

1 Stop playback

Press the [7] button.

2 Select the Random Play mode

Press the [RANDOM] button.

Each time the button is pressed, the Random

Play mode switches as shown below.

In CD source

Display Setting

"RANDOM ON" Plays the songs on the CD in random order.

"RANDOM OFF" Turns Random Play off.

In MP3 source

Display Setting

"RANDOM" Plays the songs in the folder in random order.

"SHUFFLE ON" Stops after playing the songs in the folder in

random order.

"FOLDER" Turns Random Play off.

3 For MP3, select the folder

Press the [2]/[5]/[3]/[∞] button.

Place the cursor to any file in the folder you want

to random play.

4 Start Random Play

Press the [38] button.

18

|

English

Setup menu

You can customize default settings for various

functions of the unit using the Setup menu.

1 Stop playback

Press the [7] button.

During DVD playback, press the button twice.

During VCD playback, turn the PBC function off

by pressing the [PBC] button first.

2 Display the SETUP MENU screen

Press the [SETUP] button.

SETUP MENU is displayed on the monitor screen

connected.

3 Select the menu page you want to set up

Press the [2]/[5]/[3]/[∞] button.

4 Enter the selected menu page

Press the [ENTER] button.

The menu page selected in Step 3 is displayed.

5 Select the setup item and the option

Press the [2]/[5]/[3]/[∞] button.

Refer to the subsequent descriptions for the

setup items and options on each menu.

6 Finalize your selection

Press the [ENTER] button.

7 Exit the Setup menu

Press the [2]/[5]/[3]/[∞] and [ENTER]

buttons.

Select and execute "MAIN PAGE" and "EXIT

SETUP" in order.

SETUP

ENTER

7

English

|

19

General Setup

TV DISPLAY

Use the procedure described below to set the

output screen.

Display Setting

"NORMAL/PS" Wide-screen software with pan & scan

specification is played in a panned & scanned

screen (with the left and right sides cut off).

"NORMAL/LB" Wide-screen software with pan & scan

specification is played in a letter box screen (with

black stripes on the top and bottom).

"WIDE" Set the picture mode of the wide-screen monitor

to "FULL".

PIC (Picture) MODE

Select a DVD image mode.

Display Setting

"AUTO" The image is switched automatically depending

on the original image.

"HI-RES" The original image recorded on the DVD is the

Video mode.

"N-FLICKER" The original image recorded on the DVD is the

Movie Picture mode.

ANGLE MARK

When multiple image angles are recorded on

a DVD, they are shown by the mark during

playback.

Display Setting

"ON" Displays the Angle mark.

"OFF" Does not display the Angle mark.

OSD LANG (On Screen Display Language)

Use it in "ENGLISH" as it is.

CAPTIONS

When a disc having the Closed Captions

information is played back, this information can

be output.

Display Setting

"ON" Outputs the Closed Captions signal.

"OFF" Does not output the Closed Captions signal.

SCR (Screen) SAVER

To prevent the screen burn-out, you can start the

screen saver automatically when the on-screen

image does not change for a certain time period.

Display Setting

"ON" Starts the screen saver automatically.

"OFF" Does not use the screen saver.

Speaker Setup

DOWNMIX

Set the mixed sound output to the 2-channel

stereo port.

Display Setting

"LT/RT" Outputs the sound mixed to the Dolby Surround audio.

"STEREO" Outputs the sound mixed to the stereo sound.

20

|

English

Setup menu

Audio setup

AUDIO OUT

Display Setting

"ANALOG" Outputs an analog sound. (No digital signal is

output.)

"SPDIF/RAW" Outputs a 5.1ch S/PDIF Bitstream digital sound. (No

analog signal is output.)

"SPDIF/PCM" Outputs a 2ch S/PDIF PCM digital sound. (No

analog signal is output.)

OP MODE

Display Setting

"LINE MODE" Outputs a Normal LINE sound.

"RF MODE" Narrows down the dynamic range of an audio

signal to output via the RF modulator.

DUAL MODE

Set the output sound of a Karaoke DVD (for a

sing-along machine).

Display Setting

"STEREO" Stereo (L / R)

"L-MONO" Monaural Left (L / L)

"R-MONO" Monaural Right (R / R)

"MIX-MONO" Mixed Left and Right (L+R / L+R)

DYNAMIC

Sets the dynamic range of playback sound

recorded on a Dolby Digital system DVD.

Display Setting

"FULL"

For more powerful sound at regular volumes

"7/8"

Large

±

Compression rate

≠

Small

"6/8" / "3/4"

"5/8"

"4/8" / "1/2"

"3/8"

"2/8" / "1/4"

"1/8"

"OFF" For the regular sound

LPCM OUTPUT

Display Setting

"LPCM 48k" Outputs a song of 96kfs in 48kfs from DIGITAL OUT.

"LPCM 96k" Outputs a song of 96kfs in 96kfs from DIGITAL OUT.

Preferences

TV TYPE

A TV type can be set according to the TV color

display mode.

Display Setting

"MULTI" The color signal output is switched automatically

according to the recording system of the current disc.

"NTSC" The color signals are output in the standard NTSC system.

"PAL" The color signals are output in the standard PAL system.

AUDIO

Set the audio language produced from the

speakers.

Display Setting

"ENGLISH" English

"FRENCH" French

"SPANISH" Spanish

"CHINESE" Chinese

"JAPANESE" Japanese

SUB TITLE

Set the language of the subtitles displayed on the

screen.

Display Setting

"ENGLISH" English

"FRENCH" French

"SPANISH" Spanish

"CHINESE" Chinese

"JAPANESE" Japanese

"OFF" No subtitle is displayed

DISC MENU

Set the language of the disc menu.

Display Setting

"ENGLISH" English

"FRENCH" French

"SPANISH" Spanish

"CHINESE" Chinese

"JAPANESE"

Japanese

La pagina sta caricando ...

Kenwood KDV-S220P Manuale utente

Kenwood KDV-S220P Manuale utente

in altre lingue

Documenti correlati

Altri documenti