Pioneer AVH-A240DAB Guida Rapida

English Français Italiano Español Deutsch Nederlands

DMH-A340DAB

DMH-A240DAB

RDS AV RECEIVER

AUTORADIO MULTIMÉDIA

SINTOLETTORE AV CON RDS

RECEPTOR AV CON RDS

RDS-AV-RECEIVER

RDS AV-ONTVANGER

Quick start guide

Guide de démarrage rapide

Guida rapida all’uso

Guía de iniciación rápida

Schnellstartanleitung

Snelstartgids

AVH-A240DAB

AVH-A240BT

DVD RDS AV RECEIVER

AUTORADIO MULTIMÉDIA DVD

SINTOLETTORE DVD RDS CON AV

RECEPTOR AV RDS CON DVD

DVD-RDS-AV-EMPFÄNGER

DVD RDS AV-ONTVANGER

English

This guide is intended to guide you through the basic functions of this unit.

For details, please refer to the Operation manual stored on the website.

https://www.pioneer-car.eu/uk/

F

rançais

Ce guide a pour but de vous présenter les fonctions de base de cet appareil.

Pour les détails, veuillez vous reporter au mode d’emploi qui se trouve sur le site Web.

https://www.pioneer-car.eu/fr/fr

Italiano

Questa guida illustra le funzioni principali dell’apparecchio.

Per dettagli, fare riferimento al Manuale d’uso presente sul sito web.

https://www.pioneer-car.eu/it/it

Español

Se ha diseñado esta guía con la intención de guiarle a través de las funciones básicas de esta

unidad.

Para los detalles, consulte el Manual de instrucciones que se encuentra almacenado en el

sitio web.

https://www.pioneer-car.eu/es/es

Deutsch

Diese Anleitung führt Sie durch die grundlegenden Funktionen dieses Geräts.

Einzelheiten nden Sie in der Bedienungsanleitung, die auf der Website.

https://www.pioneer-car.eu/de/de

Nederlands

Deze gids is bedoeld om u bekend te maken met de basisfuncties van dit toestel.

Raadpleegt u voor details de handleiding op onze website.

https://www.pioneer-car.eu/nl/nl

2En

Declaration of Conformity with regard to the Radio Equipment Directive 2014/53/EU

[*] DMH-A340DAB, DMH-A240DAB, AVH-A240DAB, AVH-A240BT

English:

Hereby, Pioneer declares that the radio equipment type

[*] is in compliance with Directive 2014/53/EU.

The full text of the EU declaration of conformity is

available at the following internet address: http://

www.pioneer-car.eu/compliance

Suomi:

Pioneer vakuuttaa, että radiolaitetyyppi [*] on direktiivin

2014/53/EU mukainen.

EU-vaatimustenmukaisuusvakuutuksen täysimittainen

teksti on saatavilla seuraavassa internetosoitteessa:

http://www.pioneer-car.eu/compliance

Nederlands:

Hierbij verklaar ik, Pioneer, dat het type radioapparatuur

[*] conform is met Richtlijn 2014/53/EU.

De volledige tekst van de EU-conformiteitsverklaring

kan worden geraadpleegd op het volgende

internetadres: http://www.pioneer-car.eu/compliance

Français:

Le soussigné, Pioneer, déclare que l’équipement

radioélectrique du type [*] est conforme à la directive

2014/53/UE.

Le texte complet de la déclaration UE de conformité est

disponible à l’adresse internet suivante: http://

www.pioneer-car.eu/compliance

Svenska:

Härmed försäkrar Pioneer att denna typ av

radioutrustning [*] överensstämmer med direktiv 2014/

53/EU.

Den fullständiga texten till EU-försäkran om

överensstämmelse finns på följande webbadress: http://

www.pioneer-car.eu/compliance

Dansk:

Hermed erklærer Pioneer, at radioudstyrstypen [*] er i

overensstemmelse med direktiv 2014/53/EU.

EU-overensstemmelseserklæringens fulde tekst kan

findes på følgende internetadresse: http://

www.pioneer-car.eu/compliance

Deutsch:

Hiermit erklärt Pioneer, dass der Funkanlagentyp [*] der

Richtlinie 2014/53/EU entspricht.

Der vollständige Text der EU-Konformitätserklärung ist

unter der folgenden Internetadresse verfügbar: http://

www.pioneer-car.eu/compliance

Ελληνικά:

Με την παρούσα ο/η Pioneer, δηλώνει ότι ο

ραδιοεξοπλισμός [*] πληροί την οδηγία 2014/53/ΕΕ.

Το πλήρες κείμενο της δήλωσης συμμόρφωσης ΕΕ

διατίθεται στην ακόλουθη ιστοσελίδα στο διαδίκτυο:

http://www.pioneer-car.eu/compliance

Italiano:

Il fabbricante, Pioneer, dichiara che il tipo di

apparecchiatura radio [*] è conforme alla direttiva 2014/

53/UE.

Il testo completo della dichiarazione di conformità UE è

disponibile al seguente indirizzo Internet: http://

www.pioneer-car.eu/compliance

Español:

Por la presente, Pioneer declara que el tipo de equipo

radioeléctrico [*] es conforme con la Directiva 2014/53/

UE.

El texto completo de la declaración UE de conformidad

está disponible en la dirección Internet siguiente: http://

www.pioneer-car.eu/compliance

Português:

O(a) abaixo assinado(a) Pioneer declara que o presente

tipo de equipamento de rádio [*] está em conformidade

com a Diretiva 2014/53/UE.

O texto integral da declaração de conformidade está

disponível no seguinte endereço de Internet: http://

www.pioneer-car.eu/compliance

Čeština:

Tímto Pioneer prohlašuje, že typ rádiového zařízení [*] je

v souladu se směrnicí 2014/53/EU.

Úplné znění EU prohlášení o shodě je k dispozici na této

internetové adrese: http://www.pioneer-car.eu/

compliance

Eesti:

Käesolevaga deklareerib Pioneer, et käesolev

raadioseadme tüüp [*] vastab direktiivi 2014/53/EL

nõuetele.

ELi vastavusdeklaratsiooni täielik tekst on kättesaadav

järgmisel internetiaadressil: http://www.pioneer-car.eu/

compliance

Magyar:

Pioneer igazolja, hogy a [*] típusú rádióberendezés

megfelel a 2014/53/EU irányelvnek.

Az EU-megfelelőségi nyilatkozat teljes szövege elérhető

a következő internetes címen: http://www.pioneer-

car.eu/compliance

Latviešu valoda:

Ar šo Pioneer deklarē, ka radioiekārta [*] atbilst

Direktīvai 2014/53/ES.

Pilns ES atbilstības deklarācijas teksts ir pieejams šādā

interneta vietnē: http://www.pioneer-car.eu/compliance

Lietuvių kalba:

Aš, Pioneer, patvirtinu, kad radijo įrenginių tipas [*]

atitinka Direktyvą 2014/53/ES.

Visas ES atitikties deklaracijos tekstas prieinamas šiuo

interneto adresu: http://www.pioneer-car.eu/

compliance

Manufacturer:

Pioneer Corporation

28-8, Honkomagome 2-chome, Bunkyo-ku,

Tokyo 113-0021, Japan

EU Authorised Representative’s & Importer:

Pioneer Europe NV

Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium/Belgique

http://www.pioneer-car.eu

Malti:

B’dan, Pioneer, niddikjara li dan it-tip ta’ tagħmir tar-

radju [*] huwa konformi mad-Direttiva 2014/53/UE.

It-test kollu tad-dikjarazzjoni ta’ konformità tal-UE huwa

disponibbli f’dan l-indirizz tal-Internet li ġej: http://

www.pioneer-car.eu/compliance

Slovenčina:

Pioneer týmto vyhlasuje, že rádiové zariadenie typu [*]

je v súlade so smernicou 2014/53/EÚ.

Úplné EÚ vyhlásenie o zhode je k dispozícii na tejto

internetovej adrese: http://www.pioneer-car.eu/

compliance

Slovenščina:

Pioneer potrjuje, da je tip radijske opreme [*] skladen z

Direktivo 2014/53/EU.

Celotno besedilo izjave EU o skladnosti je na voljo na

naslednjem spletnem naslovu: http://www.pioneer-

car.eu/compliance

Română:

Prin prezenta, Pioneer declară că tipul de echipamente

radio [*] este în conformitate cu Directiva 2014/53/UE.

Textul integral al declarației UE de conformitate este

disponibil la următoarea adresă internet: http://

www.pioneer-car.eu/compliance

български:

С настоящото Pioneer декларира, че този тип

радиосъоръжение [*] е в съответствие с Директива

2014/53/ЕС.

Цялостният текст на ЕС декларацията за

съответствие може да се намери на следния

интернет адрес: http://www.pioneer-car.eu/

compliance

Polski:

Pioneer niniejszym oświadcza, że typ urządzenia

radiowego [*] jest zgodny z dyrektywą 2014/53/UE.

Pełny tekst deklaracji zgodności UE jest dostępny pod

następującym adresem internetowym: http://

www.pioneer-car.eu/compliance

Norsk:

Herved Pioneer erklærer at radioutstyr type [*] er i

samsvar med direktiv 2014/53/EU.

Den fullstendige teksten i EU-samsvarserklæringen er

tilgjengelig på følgende internettadresse: http://

www.pioneer-car.eu/compliance

Íslenska:

Hér með Pioneer lýsir yfir að tegund þráðlausan búnað

[*] er í samræmi við tilskipun 2014/53/ESB.

The fullur texti af ESB-samræmisyfirlýsingu er í boði á

eftirfarandi veffangi: http://www.pioneer-car.eu/

compliance

Hrvatski:

Pioneer ovime izjavljuje da je radijska oprema tipa [*] u

skladu s Direktivom 2014/53/EU.

Cjeloviti tekst EU izjave o sukladnosti dostupan je na

sljedećoj internetskoj adresi: http://www.pioneer-

car.eu/compliance

Türk:

Burada. Pioneer radyo ekipmani turunun [*] 2014/53/EU

direktiflerine uyumlu oldugunu beyan eder.

Avrupa uyumluluk beyaninin tam metni belirtilen

internet sitesinde mevcuttur: http://www.pioneer-

car.eu/compliance

[Bluetooth® specications]

Output power: +4 dBm Maximum. (Power class 2)

Frequency band(s): 2 402.0 MHz to 2 480.0 MHz

3En

English

Declaration of Conformity with regard to the Radio Equipment Regulations 2017

[*] DMH-A340DAB, DMH-A240DAB, AVH-A240DAB, AVH-A240BT

Hereby, Pioneer declares that the radio equipment type [*] is in compliance with UK SI 2017 No. 1206. The full text of the UK

declaration of conformity is available at the following internet address:

http://www.pioneer-car.eu/compliance

Manufacturer:

Pioneer Corporation

28-8, Honkomagome 2-chome, Bunkyo-ku,

Tokyo 113-0021, Japan

UK Authorised Representative’s & Importer:

Pioneer Europe NV

Salamanca, Wellington Street, Slough, SL1 1YP, UK

http://www.pioneer-car.eu

Private households in the member states of the EU, in Switzerland and Norway may return their used

electronic products free of charge to designated collection facilities or to a retailer (if you purchase a

similar new one).

For countries not mentioned above, please contact your local authorities for the correct method of

disposal.

By doing so you will ensure that your disposed product undergoes the necessary treatment, recovery

and recycling and thus prevent potential negative effects on the environment and human health.

WARNING

Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the

product, and to protect it from overheating. To prevent fire hazard, the openings should never be

blocked or covered with items (such as papers, floor mat, cloths).

CAUTION

This product is evaluated in moderate and tropical climate condition under the Audio, video and

similar electronic apparatus - Safety requirements, IEC 60065.

WARNING

• LIGHT GREEN LEAD AT POWER CONNECTOR IS DESIGNED TO DETECT PARKED STATUS AND

MUST BE CONNECTED TO THE POWER SUPPLY SIDE OF THE HANDBRAKE SWITCH. IMPROPER

CONNECTION OR USE OF THIS LEAD MAY VIOLATE APPLICABLE LAW AND MAY RESULT IN

SERIOUS INJURY OR DAMAGE.

Precaution

If you want to dispose this product, do not mix it with general household waste. There is a separate

collection system for used electronic products in accordance with legislation that requires proper

treatment, recovery and recycling.

CAUTION

This product is a Class 1 laser product classified under the safety standard, IEC 60825-1:2014.

CLASS 1 LASER PRODUCT

To ensure safe driving

4En

• Do not take any steps to tamper with or disable the handbrake interlock system which is in

place for your protection. Tampering with or disabling the handbrake interlock system could

result in serious injury or death.

• To avoid the risk of damage and injury and the potential violation of applicable laws, this

product is not for use with a video image that is visible to the driver.

• In some countries the viewing of video image on a display inside a vehicle even by persons other

than the driver may be illegal. Where such regulations apply, they must be obeyed.

If you attempt to watch video image while driving, the warning “Viewing of front seat

video source while driving is strictly prohibited.” will appear on the screen. To watch

video image on this display, stop the vehicle in a safe place and apply the handbrake.

Please keep the brake pedal pushed down before releasing the handbrake.

This manual uses diagrams of actual screens to describe operations. However, the

screens on some units may not match those shown in this manual depending on the

model used.

About this manual

▶DMH-A340DAB

▶DMH-A240DAB

Getting started

What’s What

Touch Touch and hold

Swipe

5En

English

▶AVH-A240DAB/AVH-A240BT

Press to display off

Press and hold to power off

Press to display the top menu screen

Press and hold to mute or unmute

VOL (+/-)

USB port

Disc eject

Disc loading slot

1 Press .

2 [Date & Time].

Adjusting the date and time

Adjust the date and time

6En

Selecting the source

Select a source

Display hidden sources

Tuner operation

Store the strongest broadcast frequencies

Select a band

Tune into the next station

Recall the preset channel stored to a key from memory

Store the current broadcast frequency to a key

Switch to display or hide the radio station name

Switch to receive only the radio stations (short range/long

range) with sufficiently strong signals

Start seek turning

7En

English

▶AVH-A240DAB/AVH-A240BT

Moving images operation

Pause and start playback

Change the playback point

Select the previous file or the next file

Fast forwards or fast reverse (only for USB)

Display the menu

Fast forwards or fast reverse

Start the search function

Audio operation

Pause and start playback

Select the previous file or the next file

Fast forwards or fast reverse

Set the function for playing audio

8En

List search operation

Display the playlist screen

Select the media file types

Select a list title or folder that you want to play

Scroll the list

1 Press .

2 [Phone].

3 Select the unit name shown in the mobile device display.

4 Perform the pairing operation by the mobile device and this unit.

NOTE

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any

use of such marks by Pioneer Corporation is under license. Other trademarks and trade names are

those of their respective owners.

Bluetooth® connection

Bluetooth telephone operation

Enter the phone number directly

Switch to the phone book mode

Switch to the call history list

Make an outgoing call

9En

English

• Do not operate this product, any

applications, or the rear view camera

option (if purchased) if doing so will

divert your attention in any way from the

safe operation of your vehicle. Always

observe safe driving rules and follow all

existing traffic regulations. If you

experience difficulty in operating this

product, pull over, park your vehicle in a

safe location and apply the handbrake

before making the necessary

adjustments.

• Do not install this product where it may

(i) obstruct the driver’s vision,

(ii) impair the performance of any of the

vehicle’s operating systems of safety

features, including airbags, hazard lamp

buttons, or

(iii) impair the driver’s ability to safely

operate the vehicle.

In some cases, it may not be possible to

install this product because of the vehicle

type or the shape of the vehicle interior.

WARNING

Pioneer does not recommend that you

install this product yourself. This product is

designed for professional installation only.

We recommend that only authorised

Pioneer service personnel, who have

special training and experience in mobile

electronics, set up and install this product.

NEVER SERVICE THIS PRODUCT YOURSELF.

Installing or servicing this product and its

connecting cables may expose you to the

risk of electric shock or other hazards, and

can cause damage to this product that is

not covered by warranty.

WARNING

Do not take any steps to tamper with or

disable the handbrake interlock system

which is in place for your protection.

Tampering with or disabling the

handbrake interlock system could result in

serious injury or death.

CAUTION

• Secure all wiring with cable clamps or

electrical tape. Do not allow any bare

wiring to remain exposed.

• Do not directly connect the yellow lead of

this product to the vehicle battery. If the

lead is directly connected to the battery,

engine vibration may eventually cause

the insulation to fail at the point where

the wire passes from the passenger

compartment into the engine

compartment. If the yellow lead’s

insulation tears as a result of contact with

metal parts, short-circuiting can occur,

resulting in considerable danger.

• It is extremely dangerous to allow cables

to become wound around the steering

column or gearstick. Be sure to install this

product, its cables, and wiring away in

such so that they will not obstruct or

hinder driving.

Connection

Precautions

Your new product and this

manual

Important safeguards

Precautions before

connecting the system

• Make sure that the cables and wires will

not interfere with or become caught in

any of the vehicle’s moving parts,

especially the steering wheel, gearstick,

handbrake, sliding seat tracks, doors, or

any of the vehicle’s controls.

• Do not route wires where they will be

exposed to high temperatures. If the

insulation heats up, wires may become

damaged, resulting in a short circuit or

malfunction and permanent damage to

the product.

• Do not shorten any leads. If you do, the

protection circuit (fuse holder, fuse

resistor or filter, etc.) may fail to work

properly.

• Never feed power to other electronic

products by cutting the insulation of the

power supply lead of this product and

tapping into the lead. The current

capacity of the lead will be exceeded,

causing overheating.

• Use this product with a 12-volt battery

and negative earthing only. Failure to do

so may result in a fire or malfunction.

• To avoid shorts in the electrical system,

be sure to disconnect the (–) battery

cable before installation.

WARNING

• When speaker output is used by 4

channels , use speakers over 50 W

(Maximum input power) and between 4

Ω to 8 Ω (impedance value). Do not use 1

Ω to 3 Ω speakers for this unit.

• The black lead is earth. Please earth this

lead separately from the earth of high

current products such as power amps. Do

not earth more than one product

together with the earth from another

product. For example, you must

separately earth any amp unit away from

the earth of this product. Connecting

earths together can cause a fire and/or

damage the products if their earths

became detached.

• When replacing the fuse, be sure to only

use a fuse of the rating prescribed on this

product.

• This product cannot be installed in a

vehicle without ACC (accessory) position

on the ignition switch.

• To avoid short-circuiting, cover the

disconnected lead with insulating tape. It

is especially important to insulate all

unused speaker leads, which if left

uncovered may cause a short circuit.

• For connecting a power amp or other

devices to this product, refer to the

manual for the product to be connected.

• The graphical symbol placed on

the product means direct current.

• When the ignition switch is turned on

(ACC ON), a control signal is output

through the blue/white lead. Connect to

an external power amp’s system remote

control terminal, the auto-aerial relay

control terminal, or the aerial booster

power control terminal (max. 300 mA 12

V DC). The control signal is output

Before installing this

product

To prevent damage

Notice for the blue/

white lead

ACC position

No ACC position

10En

through the blue/white lead, even if the

audio source is switched off.

Microphone 3 m

This product

Aerial jack

Digital Radio aerial input (DMH-

A340DAB, DMH-A240DAB, AVH-

A240DAB)

Wired remote input (SWC)

Hard-wired remote control adapter can

be connected (sold separately).

Pre out supply (REAR VIEW CAMERA

IN)

Fuse (10 A)

Power supply

To power supply

Depending on the kind of vehicle, the

function of 2* and 4* may be different.

In this case, be sure to connect 1* to 4*

and 3* to 2*.

Yellow (2*)

Back-up (or accessory)

Yellow (1*)

Connect to the constant 12 V supply

terminal.

Red (4*)

Accessory (or back-up)

This product

Power cord

Red (3*)

Connect to terminal controlled by

ignition switch (12 V DC).

Connect leads of the same colour to

each other.

Orange/white

To lighting switch terminal.

Black (earth)

To vehicle (metal) body.

Blue/white (5*)

The pin position of the ISO connector

will differ depending on the type of

vehicle. Connect 5* and 6* when Pin 5 is

an aerial control type. In another type of

vehicle, never connect 5* and 6*.

Blue/white (6*)

Connect to auto-aerial relay control

terminal (max. 300 mA 12 V DC).

Blue/white

Connect to system control terminal of

the power amp (max. 300 mA 12 V DC).

Violet/white

Of the two lead wires connected to the

back lamp, connect the one in which

the voltage changes when the gear shift

is in the REVERSE (R) position. This

connection enables the unit to sense

whether the car is moving forwards or

backwards.

Yellow/black

If you use an equipment with Mute

function, wire this lead to the Audio

Mute lead on that equipment. If not,

keep the Audio Mute lead free of any

connections.

Light green

Used to detect the ON/OFF status of the

handbrake. This lead must be

connected to the power supply side of

the handbrake switch.

Connection method

Clamp the lead (1) then clamp firmly

with needle-nosed pliers (2).

Power supply side

Handbrake switch

Earth side

Speaker leads

White: Front left + or high range left +

White/black: Front left – or high range

left –

Grey: Front right + or high range right +

Grey/black: Front right – or high range

right –

Green: Rear left + or middle range left +

Green/black: Rear left – or middle range

left –

Violet: Rear right + or middle range

right +

Violet/black: Rear right – or middle

range right –

ISO connector

In some vehicles, the ISO connector

may be divided into two. In this case, be

sure to connect to both connectors.

NOTE

The position of the handbrake switch

depends on the vehicle model. For details,

consult the vehicle Owner’s Manual or

dealer.

11En

English

Important

The speaker leads are not used when this connection is in use.

Subwoofer output (SUBWOOFER OUTPUT)

RCA conversion cable (sold separately)

RCA cable (sold separately)

Power amp

Front output (FRONT OUTPUT)

Rear output (REAR OUTPUT)

Pre out cord

To pre out supply

System remote control

Connect to Blue/white cable (max. 300 mA 12 V DC).

Rear speaker

Front speaker

Subwoofer

Power amp (sold separately)

NOTES

• For details on how to connect an external

device using a separately sold cable, refer

to the manual for the cable.

• For details concerning the connection

and operations of iPhone or smartphone,

refer to the Operation Manual.

▶DMH-A340DAB

▶DMH-A240DAB/AVH-A240DAB/AVH-

A240BT

USB port

USB cable 1.5 m

USB interface cable for iPhone (sold

separately)

iPhone with Lightning connector

▶DMH-A340DAB

▶DMH-A240DAB/AVH-A240DAB/AVH-

A240BT

USB port

USB cable 1.5 m

USB - micro USB cable (Type USB A -

micro USB B) (sold separately)

USB Type-C cable (Type USB A - USB C)

(sold separately)

Smartphone

NOTES

• The length of Type USB A - micro USB B

cable cannot exceed 2 m and Type USB A

iPhone and

smartphone

iPhone with Lightning

connector

Connecting via the USB port

Smartphone (Android™

device)

Connecting via the USB port

12En

- USB C cannot exceed 4 m according to

the USB cable standard. When using a

cable other than the above conditions,

the main unit function may not operate

properly.

• Android is a trademark of Google LLC.

About rear view camera

When you use the rear view camera, the

rear view image is automatically switched

from the video by moving the gearstick to

REVERSE (R). Camera View mode also

allows you to check what is behind you

while driving.

WARNING

USE INPUT ONLY FOR REVERSE OR MIRROR

IMAGE REAR VIEW CAMERA. OTHER USE

MAY RESULT IN INJURY OR DAMAGE.

CAUTION

• The screen image may appear reversed.

• With the rear view camera you can keep

an eye on trailers, or back into a tight

parking spot. Do not use for

entertainment purposes.

• Objects in rear view may appear closer or

more distant than in reality.

• The image area of full-screen images

displayed while backing or checking the

rear of the vehicle may differ slightly.

This product

Pre out supply

Power supply

To pre out supply

To power supply

Power cord

Brown (REAR VIEW CAMERA IN)

Violet/white (REVERSE-GEAR SIGNAL

INPUT)

Refer to Power cord on page 10.

RCA cable (sold separately)

To video output

Rear view camera (sold separately)

NOTES

• Connect only the rear view camera to

REAR VIEW CAMERA IN. Do not connect

any other equipment.

• When the camera image is not displayed

on screen, check the camera setting in

the setting menu. For details, refer to the

Operation Manual.

Camera

This product

Pre out supply

AUX input

Mini-jack AV cable (sold separately)

To pre out supply

Pre out cord

Yellow

Red, white

Yellow (REAR MONITOR OUT)

RCA cables (sold separately)

To video output

To audio outputs

External video component (sold

separately)

To video input

Rear display with RCA input jack

WARNING

NEVER install the rear display in a

location that enables the driver to watch

the video source while driving.

This product’s rear video output is for

connection of a display to enable

passengers in the rear seats to watch the

video source.

CAUTION

Be sure to use a mini-jack AV cable (sold

separately) for wiring. If you use other

cables, the wiring position might differ

resulting in disturbed images and sounds.

External video component

and the display

L : Left audio (White)

R : Right audio (Red)

V : Video (Yellow)

G : Earth

13En

English

CAUTION

• Never install this product in places where,

or in a manner that:

– Could injure the driver or passengers if

the vehicle stops suddenly.

– May interfere with the driver’s operation

of the vehicle, such as on the floor in

front of the driver’s seat, or close to the

steering wheel or gearstick.

• To ensure proper installation, be sure to

use the supplied parts in the manner

specified. If any parts are not supplied

with this product, use compatible parts in

the manner specified after you have the

part compatibility checked by your

dealer. If parts other than supplied or

compatible ones are used, they may

damage internal parts of this product or

they may work loose and the product

may become detached.

• Do not install this product where it may

(i) obstruct the driver’s vision, (ii) impair

the performance of any of the vehicle’s

operating systems or safety features,

including airbags, hazard lamp buttons

or (iii) impair the driver’s ability to safely

operate the vehicle.

• Never install this product in front of or

next to the place in the dashboard, door,

or pillar from which one of your vehicle’s

airbags would deploy. Please refer to your

vehicle’s owner’s manual for reference to

the deployment area of the frontal

airbags.

• Consult with your nearest dealer if

installation requires drilling holes or

other modifications of the vehicle.

• Before making a final installation of this

product, temporarily connect the wiring

to confirm that the connections are

correct and the system works properly.

• Do not install this product in places

subject to high temperatures or

humidity, such as:

– Places close to a heater, vent or air

conditioner.

– Places exposed to direct sunlight, such

as on top of the dashboard.

– Places that may be exposed to rain,

such as close to the door or on the

vehicle’s floor.

• Install this product horizontally on a

surface within 0 to 30 degrees tolerance

(AVH) or 0 to 60 degrees tolerance (DMH).

• When installing, to ensure proper heat

dispersal when using this unit, make sure

you leave ample space behind the rear

panel and wrap any loose cables so they

are not blocking the vents.

Installation

Precautions before

installation

Before installing

Installation notes

1 Remove transport screws. (AVH-

A240DAB/AVH-A240BT)

Important

Remove these two transport screws before

installation. Otherwise, the disc player will

not work.

Transport screw

2 Insert the supplied extraction keys

into both sides of the unit until they

click into place.

3 Pull the unit out of the holder.

Extraction key

1 Install the holder into the dashboard.

2 Secure the mounting sleeve by using a

screwdriver to bend the metal tabs

(90°) into place.

Dashboard

Holder

3 Install this product into the holder.

Dashboard

4 Attach the trim ring.

Trim ring

Before installing this

product

Leave ample

space

5 cm

Installation with the

holder

112 mm

182 mm

14En

Groove

Attach the trim ring with the side

with a groove facing downward.

1 Fastening this product to the factory

radio-mounting bracket.

Position this product so that its screw

holes are aligned with the screw holes

of the bracket, and tighten the screws at

three locations on each side.

Factory radio-mounting bracket

If the pawl interferes with

installation, you may bend it down

out of the way.

Dashboard or console

Flush surface screw

Be sure to use the screws supplied

with this product.

• Install the microphone in a place where

its direction and distance from the driver

make it easiest to pick up the driver’s

voice.

• Be sure to turn off (ACC OFF) the product

before connecting the microphone.

• Depending on the vehicle model, the

microphone cable length may be too

short when you mount the microphone

on the sun visor. In such cases, install the

microphone on the steering column.

1 Fit the microphone lead into the

groove.

Microphone lead

Groove

2 Attach the microphone clip to the sun

visor.

Installation using the screw

holes on the side of this

product

Installing the

microphone

Mounting on the sun

visor

Microphone clip

Clamps

Use separately sold clamps to secure

the lead where necessary inside the

vehicle.

Install the microphone on the sun visor

when it is in the up position. It cannot

recognise the driver’s voice if the sun

visor is in the down position.

1 Detach the microphone base from the

microphone clip by sliding the

microphone base while pressing the

tab.

Tab

Microphone base

2 Mount the microphone on the

steering column.

Double-sided tape

Clamps

Use separately sold clamps to secure

the lead where necessary inside the

vehicle.

NOTE

Install the microphone on the steering

column, keeping it away from the steering

wheel.

The microphone angle can be adjusted.

Installation on the

steering column

Adjusting the microphone

angle

15En

English

2Fr

Les particuliers résidant dans les états membres de l’UE, en Suisse et en Norvège peuvent retourner

gratuitement leurs produits électroniques usagés dans un centre de collecte désigné ou chez un

revendeur (en cas d’achat d’un nouvel appareil similaire).

Pour les pays non mentionnées ci-dessus, veuillez contacter les autorités locales pour connaître la

méthode adéquate de mise au rebut.

Ainsi, vous vous assurez que votre appareil mis au rebut suit le traitement, la récupération et le

recyclage nécessaires, empêchant ainsi les effets potentiellement négatifs sur l’environnement et la

santé humaine.

ATTENTION

Les fentes et les ouvertures du boîtier sont conçus pour la ventilation afin d’assurer le bon

fonctionnement du produit, et pour le protéger de toute surchauffe. Pour éviter tout risque d’incendie,

les ouvertures ne doivent jamais être bloquées ou recouvertes d’objets (tels que du papier, un tapis, des

vêtements).

PRÉCAUTION

Ce produit est évalué sous des conditions climatiques modérées et tropicales conformément à la

norme CEI 60065 sur les Appareils audio, vidéo et appareils électroniques analogues - Exigences de

sécurité.

Précautions

Pour la mise au rebut de ce produit, ne le mélangez pas avec les déchets domestiques habituels. Un

système de collecte spécifique pour les produits électroniques usagés existe conformément à la

législation en vigueur sur le traitement, la collecte et le recyclage.

ATTENTION

Le lecteur optique monté sur ce véhicule est classifié comme produit laser de classe 1 selon la norme

relative à la sécurité, CEI 60825-1:2014.

PRODUIT LASER DE CLASSE 1

ATTENTION

• LE FIL VERT CLAIR SUR LE CONNECTEUR D’ALIMENTATION EST CONÇU POUR DÉTECTER L’ÉTAT

D’ARRÊT DU VÉHICULE ET DOIT ÊTRE RACCORDÉ AU CIRCUIT D’ALIMENTATION DU

CONTACTEUR DU FREIN DE STATIONNEMENT. TOUTE CONNEXION OU UTILISATION

INCORRECTE DE CE FIL RISQUE D’ENTRAÎNER LE NON-RESPECT DES LOIS EN VIGUEUR ET DE

PROVOQUER DES DOMMAGES CORPORELS ET MATÉRIELS GRAVES.

• N’essayez pas de manipuler ou de désactiver le système de verrouillage du frein de

stationnement en place pour votre sécurité. Toute manipulation ou désactivation du système

de verrouillage du frein de stationnement risque d’entraîner des dommages corporels graves,

voire la mort.

• Pour éviter les dommages matériels et corporels et respecter les lois en vigueur, le conducteur

ne doit pas utiliser ce produit lorsqu’il est tenté de regarder les vidéos à l’écran.

• Dans certains pays, il peut être illégal pour le conducteur autant que pour les passagers de regarder

des vidéos sur un écran installé à l’intérieur du véhicule. Dans ce cas, vous devez respecter les lois en

vigueur.

Si vous tentez de regarder une vidéo tout en conduisant, l’avertissement «Il est

strictement interdit de voir la source vidéo depuis le siège avant pendant la

conduite. » apparaît sur l’écran. Pour regarder une vidéo sur cet écran, garez votre

véhicule dans un endroit sûr et serrez le frein de stationnement. Appuyez sur la pédale

de frein avant de desserrer le frein de stationnement.

Pour illustrer les procédures décrites dans ce manuel, des images d’écrans réels sont

utilisées. Néanmoins, les écrans de certains produits peuvent être différents de ceux

présentés dans ce manuel selon le modèle utilisé.

Conseils pour une conduite sécuritaire

À propos de ce manuel

3Fr

Français

▶DMH-A340DAB

▶DMH-A240DAB

Mise en route

Description de l’appareil

Toucher Maintenir le doigt

Faire glisser

▶AVH-A240DAB/AVH-A240BT

Appuyez pour désactiver l’affichage

Maintenez la touche enfoncée pour mettre l’appareil hors

tension

Appuyez pour afficher l’écran du menu principal

Maintenez la touche enfoncée pour activer ou désactiver le

son

VOL (+/-)

Port USB

Éjection du disque

Fente de chargement des disques

4Fr

1 Appuyez sur .

2 [Date et heure].

Réglage de la date et de l’heure

Régler la date et l’heure

Sélection de la source

Sélectionner une source

Afficher les sources masquées

La pagina sta caricando ...

Pioneer AVH-A240DAB Guida Rapida

Pioneer AVH-A240DAB Guida Rapida

in altre lingue

Documenti correlati