Philips D6052B/05 Manuale utente

Categoria
Telefoni
Tipo
Manuale utente

Questo manuale è adatto anche per

www.philips.com/support
Extended user
documentation
Always there to help you
Register your product and get support at
D600
D605
Question?
Contact
Philips
1EN
Contents
1 Important safety instructions 3
2 Your phone 5
What is in the box 5
Overview of the phone 6
Overview of the base station 7
3 Main menu icons 8
4 Display icons 9
5 Get started 10
Connect the base station 10
Insert the supplied batteries 11
Congure your phone (country
dependent) 11
Change the remote access PIN code 12
Charge the handset 12
Check the battery level 12
What is standby mode? 13
Check the signal strength 13
6 Calls 14
Make a call 14
Answer a call 14
End a call 15
Adjust the earpiece/speaker volume 15
Mute the microphone 15
Turn the speaker on or off 15
Make a second call 15
Answer a second call 15
Switch between two calls 15
Make a conference call with the
external callers 15
7 Intercom and conference calls 17
Make a call to another handset 17
Transfer a call 17
Make a conference call 17
8 Text and numbers 19
Enter text and numbers 19
Switch between uppercase and
lowercase 19
9 Phonebook 20
View the phonebook 20
Search a record 20
Call from the phonebook 20
Access the phonebook during a call 20
Add a record 20
Edit a record 21
Set the personalized melody 21
Set the speed dial keys 21
Delete a record 21
Delete all records 21
Add a contact to the exception list 22
10 Call log 23
Call list type 23
View the call records 23
Save a call record to the phonebook 23
Return a call 23
Delete a call record 24
Delete all call records 24
11 Redial list 25
View the redial records 25
Save a redial record to the phonebook 25
Redial a call 25
Delete a redial record 25
Delete all redial records 25
12 Phone settings 26
Sound settings 26
Set the date and time 27
ECO mode 27
ECO+ mode 28
Name the handset 28
Set the display language 28
Display settings 29
13 Alarm clock 30
2 EN
Set the alarm 30
Turn off the alarm 30
14 Baby monitor 31
Activate/Deactivate the baby unit 31
Send an alert 31
Set the baby cry level 32
15 Telephone answering machine 33
Turn the answering machine on or off 33
Set the answering machine language 33
Set the answer mode 33
Announcements 33
Incoming messages 34
16 Services 38
Auto conference 38
Call barring 38
Call list type 38
Auto prex 39
Network type 39
Select the recall duration 39
Dial mode 39
First ring 40
Auto clock 40
Register additional handsets 40
Unregister handsets 41
Call services 41
Restore default settings 42
17 Technical data 43
18 Notice 44
Declaration of conformity 44
Use GAP standard compliance 44
Compliance with EMF 44
Disposal of your old product and
batteries 44
19 Frequently asked questions 46
20 Appendix 48
Text and number input tables 48
21 Index 50
3EN
1 Important safety
instructions
Power requirements
This product requires an electrical supply
of 100-240 volts AC. In case of power
failure, the communication can be lost.
The voltage on the network is classied
as TNV-3 (Telecommunication Network
Voltages), as dened in the standard EN
60950.
Warning
The Electrical network is classied as hazardous. The
only way to power down the charger is to unplug the
power supply from the electrical outlet. Ensure that the
electrical outlet is always easily accessible.
To avoid damage or malfunction
Caution
Use only the power supply listed in the user
instructions.
Use only the batteries listed in the user instructions.
Risk of explosion if battery is replaced by an incorrect
type.
Dispose of used batteries according to the instructions.
Do not dispose of batteries in re.
Always use the cables provided with the product.
Do not allow the charging contacts or the battery to
come into contact with metal objects.
Do not let small metal objects come into contact with
the product. This can deteriorate audio quality and
damage the product.
Metallic objects may be retained if placed near or on
the handset receiver.
Do not use the product in places where there are
explosive hazards.
Do not open the handset, base station or charger as
you could be exposed to high voltages.
For pluggable equipment, the socket-outlet shall
be installed near the equipment and shall be easily
accessible.
Handsfree activation could suddenly increase the
volume in the earpiece to a very high level: make sure
the handset is not too close to your ear.
This equipment is not designed to make emergency
calls when the power fails. An alternative has to be
made available to allow emergency calls.
Do not allow the product to come into contact with
liquids.
Do not use any cleaning agents containing alcohol,
ammonia, benzene, or abrasives as these may harm
the set.
Do not expose the phone to excessive heat caused by
heating equipment or direct sunlight.
Do not drop your phone or allow objects to fall on
your phone.
Active mobile phones in the vicinity may cause
interference.
When using the phone as a baby monitor
Caution
Children should be supervised to ensure that they do
not play with the appliance.
Make sure the baby unit and the cord are always out of
reach of the baby (at least 1 metre/3 feet away).
Keep the parent unit at least 1.5 metres/5 feet away
from the baby unit to prevent acoustic feedback.
Never place the baby unit inside the baby’s bed or
playpen.
Never cover the parent unit and the baby unit with
anything (e.g. a towel or blanket). Always make sure the
cooling vents of the baby unit are free.
Take every precaution to make sure that your baby can
sleep safely .
This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person
responsible for their safety.
If you place the parent unit next to a transmitter or
other DECT appliance (e.g. a DECT telephone or
wireless router for the internet), the connection with
the baby unit may be lost. Move the baby monitor
further away from the other wireless appliances until
the connection is restored.
This baby monitor is intended as an aid. It is not a
substitute for responsible and proper adult supervision
and should not be used as such.
4 EN
About operating and storage temperatures
Operate in a place where temperature is
always between 0°C to +40°C (up to 90%
relative humidity).
Store in a place where temperature is
always between -20°C and +45°C (up to
95% relative humidity).
Battery life may be shorter in low
temperature conditions.
5EN
2 Your phone
Congratulations on your purchase and welcome
to Philips!
To fully benet from the support that Philips
offers, register your product at www.philips.
com/welcome.
What is in the box
Base station (D600)
Base station (D605)
Handset**
Charger**
Power adapter**
Line cord*
Guarantee
Short user manual
Note
* In some countries, you have to connect the line
adapter to the line cord, then plug the line cord to the
telephone socket.
** In multi-handset packs, there are additional handsets,
chargers and power adapters.
4XLFNVWDUWJXLGH
6 EN
Overview of the phone
a Earpiece
b
Scroll up on the menu.
Increase the earpiece/speaker volume.
Access the contacts in standby mode.
c
Move the cursor to the right in editing
mode.
d
Press to delete individual text or digit.
Press and hold to remove all text.
Cancel operation.
Enter the redial list in standby mode.
Change the sound prole during a call.
a
d
e
c
b
h
g
f
i
j
k
m
n
l
o
p
q
Select the function displayed on the
handset screen directly above the key.
e
End the call.
Exit the menu/operation.
f
Press to enter a space during text
editing.
Press and hold to lock/unlock the
keypad in standby mode.
g
Press and hold to enter a pause when
editing the contact's name and number.
Switch to upper/lower case during
editing.
h
Mute or unmute the microphone.
i Microphone
j
Turn the speaker phone on/off.
Make and receive calls through the
speaker.
k
Press and hold to make an intercom
call (for multi-handset versions only).
Set the dial mode (pulse mode or
temporary tone mode).
l
Scroll down on the menu.
Decrease the earpiece/speaker volume.
Access the call log in standby mode.
m
Move the cursor to the left in editing
mode.
n
Make and receive calls.
Recall key
o
Access the main menu in standby
mode.
Conrm selection.
7EN
Enter the options menu.
Select the function displayed on the
handset screen directly above the key.
p Loudspeaker
q Battery door
Overview of the base station
D600
a
Find handsets.
Enter the registration mode.
D605
a Speaker (back of the base station)
b
Find handsets
Enter the registration mode.
c
Delete the current playback message.
Press and hold to delete all old
messages.
d Message counter
a
c
d
b
a
e
f
g
h
e /
Decrease/increase the speaker volume.
f /
Skip backward/forward during playback.
g
Play messages.
Stop messages playback.
h
Turn the answering machine on or off.
8 EN
3 Main menu
icons
The following is an overview of the menu
options that are available in your D600/D605.
For detailed explanation of the menu options,
see the corresponding sections in this user
manual.
Icon Descriptions
[Phone setup] - Set the date and time,
sounds, ECO mode, ECO+ mode phone
name, display language, and display
settings.
[Services] - Set the auto conference,
auto prex, network type, recall time,
auto clock, call services etc. The services
are network and country dependent.
[Alarm] - Set date and time, alarm, alarm
tone etc.
[Phonebook] - Add, edit, manage
phonebook entries etc.
[Incoming calls] - Displays the call
history of all missed or received calls
(Displays only in D600).
[Baby monitor] - Set the alert to other
handsets and the baby cry level.
[Answer machine] - Setup, listen to,
delete phone messages, etc. (Displays
only in D605).
9EN
4 Display icons
In standby mode, the icons shown on the main
screen tell you what features are available on
your handset.
Icon Descriptions
When the handset is off the base
station/charger, the bars indicate the
battery level (from full to low).
When the handset is on the base
station/charger, the bars keep scroll-
ing until charging completes.
The empty battery icon ashes and
you hear an alert tone.
The battery is low and needs
recharging.
The number of bars indicates the
connection status between the
handset and base station. The more
bars are shown, the better the signal
strength is.
This icon indicates missed calls on the
standby screen or in the incoming call
list. It changes color from red to white
after reviewing calls.
The silent mode is set, but is outside
of active period.
The ringer is off.
The silent mode is set and within
active period (the phone does not
ring).
The alarm is activated.
Answering machine: it ashes when
there is a new message. It displays
when the telephone answering
machine is turned on.
It ashes when there is a new voice
message.
It remains steadily on when the
voice messages are already viewed
in the call log.
The icon is not shown when there
is no voice message.
ECO The ECO mode is activated.
ECO+ The ECO+ mode is activated.
10 EN
5 Get started
Caution
Make sure that you have read the safety instructions in
the 'Important safety instructions' section before you
connect and install your handset.
Connect the base station
Warning
Risk of product damage! Make sure that the power
supply voltage corresponds to the voltage printed on
the back or underside of the phone.
Use only the supplied power adapter to charge the
batteries.
Note
If you subscribe to the digital subscriber line (DSL)
high speed internet service through your telephone
line, ensure you install a DSL lter between the
telephone line cord and the power socket. The lter
prevents noise and caller ID problems caused by DSL
interference. For further information on DSL lters,
contact your DSL service provider.
The type plate is located on the bottom of the base
station.
1 Connect each end of the power adapter
to:
the DC input jack at the back of the
base station;
the power socket on the wall.
2 Connect each end of the line cord to:
the telephone socket at the back of
the base station;
the telephone socket on the wall.
3 Connect each end of the power adapter
to (for multi handset versions only):
the DC input jack at the bottom of the
extra handset charger.
the power socket on the wall.
11EN
Insert the supplied batteries
Caution
Risk of explosion! Keep batteries away from heat,
sunshine or re. Never discard batteries in re.
Use only the supplied batteries.
Risk of decreased battery life! Never mix different
brands or types of batteries.
Note
Charge the batteries for 8 hours before rst use.
If the handset becomes warm when the batteries are
charging, it is normal.
Warning
Check the battery polarity when inserting in the
battery compartment. Incorrect polarity may damage
the product.
1
2
3
Congure your phone
(country dependent)
1 When using your phone for the rst time,
you see a welcome message.
2 Press [OK].
Set the country/language
Select your country/language, then press [OK]
to conrm.
» The country/language setting is saved.
Note
The country/language setting option is country
dependent. If no welcome message is displayed, it
means the country/language setting is preset for your
country. Then you can set the date and time.
To re-set the language, see the following steps.
1 Select [Menu] > > [Language], then
press [OK] to conrm.
2 Select a language, then press [OK] to
conrm.
» The setting is saved.
Set the date and time
1 Select [Menu] > > [Date & time], then
press [OK] to conrm.
2 Select [Set date]/[Set time], then press
[OK] to conrm.
3 Press the numeric buttons to enter the
date and time.
Note
If the time is in 12-hour format, press to select [am]
or [pm].
4 Press [OK] to conrm.
12 EN
Set the date and time format
1 Select [Menu] > > [Date & time], then
press [OK] to conrm.
2 Select [Date format] or [Time format].
3 Press / to select [DD-MM-YYYY] or
[MM-DD-YYYY] as the date display, and
[12 Hours] or [24 Hours] as the time
display. Then press [OK] to conrm.
» The setting is saved.
Note
The date and time format setting is country dependent.
Change the remote access
PIN code
Note
The default answering machine remote access PIN
code is 0000 and it is important to change it to ensure
the security.
This feature is available only for D605.
1 Select [Menu] > > [Remote access] >
[Change PIN], then press [OK] to conrm.
2 Enter the old PIN/passcode, then press
[OK] to conrm.
3 Enter the new PIN/passcode, then press
[OK] to conrm.
4 Enter the new PIN/passcode again, then
press [Save] to conrm.
» The setting is saved.
Charge the handset
Place the handset on the base station to
charge the handset. When the handset is
placed correctly on the base station, you hear
a docking tone (see 'Set the docking tone' on
page 27).
» The handset starts charging.
Note
Charge the batteries for 8 hours before rst use.
If the handset becomes warm when the batteries are
being charged, it is normal.
Over time, capacity of batteries decreases. This is a
normal battery behavior.
Your phone is now ready to use.
Check the battery level
The battery icon displays the current battery
level.
When the handset is off the base
station/charger, the bars indicate
the battery level (from full to low).
When the handset is on the base
station/charger, the bars ash until
charging is complete.
The empty battery icon ashes.
The battery is low and needs
recharging.
If you are on the phone, you hear warning
tones when the batteries are almost empty.
The handset turns off when the batteries are
completely empty.
13EN
What is standby mode?
Your phone is in standby mode when it is idle.
When the handset is off the charging cradle,
the standby screen displays the date and time.
When the handset is on the charging cradle,
the standby screen displays the time as a screen
saver.
Check the signal strength
The number of bars indicates
the connection status between
the handset and base station. The
more bars are shown, the better
the connection is.
Make sure the handset is linked to the base
station before you make or receive calls
and carry out the functions and features.
If you hear warning tones when you are
on the phone, the handset is almost out
of battery or the handset is out of range.
Charge the battery or move the handset
closer to the base station.
Note
When ECO+ is on, the signal strength is not displayed.
14 EN
6 Calls
Note
When the power fails, the phone cannot access
emergency services.
Tip
Check the signal strength before you make a call or
when you are in a call (see 'Check the signal strength'
on page 13).
Make a call
You can make a call in these ways:
Normal call
Predial call
Call through the speed dial key
You can also make a call from the redial list (see
'Redial a call' on page 25), phonebook list (see
'Call from the phonebook' on page 20) and call
log (see 'Return a call' on page 23).
Normal call
1 Press or .
2 Dial the phone number.
» The number is dialed out.
» The duration of your current call is
displayed.
Predial call
1 Dial the phone number
To erase a digit, press [Clear].
To enter a pause, press and hold .
2 Press or to dial out the call.
Call through the speed dial key
If you have already pre-saved a contact in the
speed dial key, press and hold the key to make
a call.
Tip
For information of how to set the speed dial keys, see
the chapter 'Phonebook', section 'Set the speed dial
keys'.
Note
The talk time of your current call is displayed on the
call timer.
If you hear warning tones, the phone is almost out of
battery or out of range. Charge the battery or move
the phone close to the base station.
Answer a call
When there is an incoming call, the phone rings
and the LCD backlight ashes. Then you can:
press or to answer the call.
select [Divert] to send incoming call to the
answering machine (only applied to D605).
select [Silent] to turn off the ringer of the
current incoming call.
Warning
When the handset rings or when the handsfree is
activated, keep the handset away from your ear to
avoid ear damage.
Note
The caller ID service is available if you have registered
to the caller ID service with your service provider.
Tip
When there is a missed call, a notication message
appears.
15EN
End a call
You can end a call in these ways:
Press ; or
Place the handset to the base station
or charging cradle.
Adjust the earpiece/speaker
volume
Press / on the handset to adjust the
volume during a call.
» The earpiece/speaker volume is
adjusted and the phone is back to the
call screen.
Mute the microphone
1 Press during a call.
» The handset displays [Mute on].
» The caller cannot hear you, but you
can still hear his voice.
2 Press again to unmute the microphone.
» You can now communicate with the
caller.
Turn the speaker on or off
Press .
Make a second call
Note
This service is network dependent.
1 Press during a call.
» The rst call is put on hold.
2 Dial the second number.
» The number displayed on the screen is
dialed out.
Answer a second call
Note
This service is network dependent.
When there is a periodical beep to notify you
of an incoming call, you can answer the call in
these ways:
1 Press and to answer the call.
» The rst call is put on hold, and you
are now connected to the second call.
2 Press and to end the current call and
answer the rst call.
Switch between two calls
Note
This service is network dependent.
You can switch your calls in these ways:
Press and ; or
Press [Option] and select [Switch calls],
then press [OK] again to conrm.
» The current call is put on hold, and you
are now connected to the other call.
Make a conference call with
the external callers
Note
This service is network dependent. Check with the
service provider for additional charges.
When you are connected to two calls, you can
make a conference call in these ways:
16 EN
Press , then ; or
Press [Option], select [Conference] and
then press [OK] again to conrm.
» The two calls are combined and a
conference call is established.
17EN
7 Intercom and
conference calls
An intercom call is a call to another handset
that shares the same base station. A conference
call involves a conversation between you,
another handset user and the outside callers.
Make a call to another
handset
Note
If the base station only has 2 registered handsets, press
and hold to make a call to another handset.
1 Press and hold .
» The handsets available for intercom are
displayed.
2 Select a handset number, then press [OK]
to conrm.
» The selected handset rings.
3 Press on the selected handset.
» The intercom is established.
4 Press [Cancel] or to cancel or end the
intercom call.
Note
If the selected handset is busy, [Busy] is displayed on
the handset screen.
While you are on the phone
You can go from one handset to another during
a call:
1 Press and hold .
» The current caller is put on hold.
2 Select a handset number, then press [OK]
to conrm.
» Wait for the other side to answer your
call.
Switch between calls
Press [Extern] to switch between the outside
call and the intercom call.
Transfer a call
Note
If the base station only has 2 registered handsets, press
and hold to transfer a call to another handset.
1 Press and hold during a call.
» The handsets available for intercom are
displayed.
2 Select a handset number, then press [OK]
to conrm.
3 Press when the other side answers
your call.
» The call is now transferred to the
selected handset.
Make a conference call
A 3-way conference call is between you,
another handset user and the outside callers. It
requires two handsets to share the same base
station.
During an external call
1 Press and hold to initiate an internal call.
» The external caller is put on hold.
» For multi-handset versions, The
handsets available for intercom are
displayed. Then go to step 2.
» For two-handset versions, the other
handset rings. Then go to step 3.
18 EN
2 Select or enter a handset number, then
press [OK] to conrm.
» The selected handset rings.
3 Press on the selected handset.
» The intercom is established.
4 Press [Conf].
» You are now in a 3-way conference
call with an external call and a selected
handset.
5 Press to end the conference call.
Note
Press to join an ongoing conference with another
handset if > [Conference] is set to [Auto].
During the conference call
Press [Int.] to put the external call on hold
and go back to the internal call.
» The external call is put on hold.
Press [Conf] to establish the conference
call again.
Note
If a handset hangs up during the conference call, the
other handset remains connected to the external call.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54

Philips D6052B/05 Manuale utente

Categoria
Telefoni
Tipo
Manuale utente
Questo manuale è adatto anche per

in altre lingue