Philips M3501B/73 Manuale utente

Extended user

documentation

Hier können Sie Ihr Produkt registrieren und Unterstützung erhalten:

www.philips.com/support

Extended user

documentation

Register your product and get support at

www.philips.com/support

Design cordless

phone (M350)

Design cordless

phone with answering

machine (M355)

Linea V

1EN

Contents

1 Important safety instructions 3

2 Your phone 4

What is in the box 4

Overview of the phone 5

Overview of the base station 6

3 Get started 7

Connect the base station 7

Install the handset 8

Congure your phone (country

dependent) 8

Change the remote access PIN

code (for M355) 9

Charge the handset 9

Check the battery level 10

What is standby mode? 10

Display icons 10

Check the signal strength 11

Switch the handset on or o 11

4 Calls 12

Make a call 12

Answer a call 12

End a call 13

Adjust the earpiece/speaker

volume 13

Mute the microphone 13

Turn the speaker on or o 13

Make a second call 13

Answer a second call 13

Switch between two calls 13

Make a conference call with

the external callers 14

5 Intercom and conference

calls 15

Make a call to another handset 15

Make a conference call 15

6 Text and numbers 17

Enter text and numbers 17

Switch between uppercase

and lowercase 17

7 Phonebook 18

View the phonebook 18

Search a record 18

Call from the phonebook 18

Access the phonebook during

a call 18

Add a record 19

Edit a record 19

Delete a record 19

Delete all records 19

8 Call log 20

Call list type 20

View the call records 20

Save a call record to the

phonebook 21

Return a call 21

Delete a call record 21

Delete all call records 21

Mark all call records as read

records 21

9 Redial list 22

View the redial records 22

Redial a call 22

Save a call record to the

phonebook 22

Delete a redial record 22

Delete all redial records 22

2

EN

10 Phone settings 23

Sound settings 23

ECO+ mode 24

Name the handset 24

Set the date and time 24

Set the display language 24

Auto answer 24

Activate/Deactivate auto hang

up 25

11 Alarm clock 26

Set the alarm 26

Turn o the alarm 26

12 Privacy mode 27

Call barring (block outgoing

calls) 27

Block incoming calls 27

13 Telephone answering

machine 29

Turn the answering machine

on or o 29

Set the answering machine

language 29

Announcements 29

Incoming messages 30

Call screening 31

Set the ring delay 32

Remote access 32

14 Services 34

Call list type 34

Auto conference 34

Network type 34

Auto prex 34

Select the recall duration 35

Dial mode 35

Auto clock 36

Register your handset or

additional handsets 36

Unregister handsets 37

Restore default settings 37

15 Technical data 38

16 Notice 39

Declaration of conformity 39

Use GAP standard compliance 39

Compliance with EMF 39

Disposal of your old product

and battery 39

17 Frequently asked questions 41

18 Appendix 44

Text and number input tables 44

3EN

1 Important

safety

instructions

Power requirements

• This product requires an electrical

supply of 100-240 volts AC.

In case of power failure, the

communication can be lost.

• The voltage on the network

is classied as TNV-3

(Telecommunication Network

Voltages), as dened in the

standard EN 60950.

Warning

• The Electrical network is classied as

hazardous. The only way to power down

the charger is to unplug the power supply

from the electrical outlet. Ensure that the

electrical outlet is always easily accessible.

To avoid damage or malfunction

Caution

• Use only the power supply listed in the user

instructions.

• Use only the batteries listed in the user

instructions.

• Risk of explosion if battery is replaced by an

incorrect type.

• Dispose of used batteries according to the

instructions.

• Do not dispose of batteries in re.

• Always use the cables provided with the

product.

• Do not allow the charging contacts or the

battery to come into contact with metal

objects.

• Do not let small metal objects come

into contact with the product. This can

deteriorate audio quality and damage the

product.

• Metallic objects may be retained if placed

near or on the handset receiver.

• Do not use the product in places where

there are explosive hazards.

• Do not open the handset, base station or

charger as you could be exposed to high

voltages.

• For pluggable equipment, the socket-outlet

shall be installed near the equipment and

shall be easily accessible.

• Handsfree activation could suddenly

increase the volume in the earpiece to a very

high level: make sure the handset is not too

close to your ear.

• This equipment is not designed to make

emergency calls when the power fails. An

alternative has to be made available to allow

emergency calls.

• Do not allow the product to come into

contact with liquids.

• Do not use any cleaning agents containing

alcohol, ammonia, benzene, or abrasives as

these may harm the set.

• Do not expose the phone to excessive heat

caused by heating equipment or direct

sunlight.

• Do not drop your phone or allow objects to

fall on your phone.

• Active mobile phones in the vicinity may

cause interference.

About operating and storage tempera-

tures

• Operate in a place where

temperature is always between

0°C to +40°C (up to 90% relative

humidity).

• Store in a place where temperature

is always between -20°C and +45°C

(up to 95% relative humidity).

• Battery life may be shorter in low

temperature conditions.

4

EN

2 Your phone

Congratulations on your purchase and

welcome to Philips!

To fully benet from the support that

Philips oers, register your product at

www.philips.com/welcome.

What is in the box

Handset**

Base station (with two connectors)

Charger (with one connector)**

Power adapter**

Line cord*

Guarantee

Quick start guide

Note

• * In some countries, you have to connect the

line adapter to the line cord, then plug the

line cord to the telephone socket.

Tip

• ** In multi-handset packs, there are

additional handsets and chargers and power

adapters.

4XLFNVWDUWJXLGH

5EN

Overview of the phone

a Earpiece

b

• Scroll up on the menu.

• Increase the earpiece/speaker

volume.

• Access the phonebook in

standby mode.

c REDIAL/C

• Delete text or digits.

• Cancel operation.

• Access the redial list in standby

mode.

• During answering machine

recording mode, press to

1

2

3

4

5

6

7

8

13

12

11

10

9

14

15

16

temporarily disable or enable

the call screening.

d

• End the call.

• Exit the menu/operation.

• Press and hold to switch the

handset on or o.

e

• Scroll down on the menu.

• Decrease the earpiece/speaker

volume.

• Access the call log in standby

mode.

f

• Press to enter a space during

text editing.

• Press and hold to lock/unlock

the keypad in standby mode.

g

• Press and hold to enter a pause

when making a call.

• Switch to upper/lower case

during editing.

h (for M350) of / (for M355)

• Mute or unmute the

microphone.

• Access to the answer machine

menu in standby mode (for

M355 only).

• Listen to new messages from

the answering machine (for

M355 only).

i Microphone

j

• Turn the speaker phone on/o.

• Make and receive calls through

the speaker.

k

• Set the dial mode (pulse mode

to temporary tone mode). This

function is country dependent.

• Press and hold to switch

between the internal and

6

EN

external call during a

conference call.

• Press and hold to make an

intercom call in standby mode

(for multi-handset version

only).

•

l

• Make and receive calls.

• Recall key (This function is

network dependent.)

m MENU/OK

• Access the main menu.

• Conrm selection.

• Enter the options menu.

• Press to access phonebook

during a call.

n Loudspeaker

o LED indicator

• O: no new event.

• Flashing: new missed

calls/new messages on

answering machine/new voice

mails.

• Flashing once: when putting

the handset on the base

station.

• Flashing quickly: incoming

calls.

p Handset back cover

Overview of the base

station

a

• Press to nd handsets.

• Press and hold to enter the

registration mode.

1

7EN

3 Get started

Caution

• Make sure that you have read the safety

instructions in the 'Important safety

instructions' section before you connect and

install your handset.

Connect the base

station

Warning

• Risk of product damage! Ensure that the

power supply voltage corresponds to the

voltage printed on the back or the underside

of the phone.

• Use only the supplied power adapter to

charge the batteries.

Note

• If you subscribe to the digital subscriber line

(DSL) high speed internet service through

your telephone line, ensure you install a DSL

lter between the telephone line cord and

the power socket. The lter prevents noise

and caller ID problems caused by the DSL

interference. For more information on the

DSL lters, contact your DSL service provider.

• The type plate is located on the bottom of

the base station.

1

Connect each end of the power

adapter to:

• the micro USB socket at the

bottom of the base station;

• the power socket on the wall.

2

Connect each end of the line cord

to:

• the telephone socket at the

bottom of the base station;

• the telephone socket on the

wall.

3

Connect each end of the power

adapter to (for multi handset

version only):

• the micro USB socket at the

bottom of the extra handset

charger.

• the power socket on the wall.

The base station is equipped with

a micro-USB socket. It allows

connection to a power bank as an

alternative source of power during AC

power outage.

8

EN

Note

• For the minimum requirement of the power

bank, see the chapter “Technical Data”.

• While using a power bank as an alternative

power source, it may drain very soon if you

charge the handset at the same time.

Install the handset

The batteries are pre-installed in the

handset. Pull the battery tape o from

the battery door before charging.

Caution

• Risk of explosion! Keep batteries away from

heat, sunshine or re. Never discard batteries

in re.

• Use only the supplied batteries.

• Risk of decreased battery life! Never mix

dierent brands or types of batteries.

Note

• Charge the batteries for 8 hours before rst

use.

• If the handset becomes warm when the

batteries are being charged, it is normal.

Warning

• When replacing the batteries, check the

battery polarity. Incorrect polarity may

damage the product.

Congure your phone

(country dependent)

Set the country/language

Select your country/language, then

press MENU/OK to conrm.

» The country/language setting is

saved.

Note

• The country/language setting option is

country dependent. If no welcome message

is displayed, it means the country/language

setting is preset for your country. Then you

can set the date and time.

9EN

To reset the language, see the

following steps.

1

Select MENU/OK > [Phone setup] >

[Language], then press MENU/OK

to conrm.

2

Select a language, then press

MENU/OK to conrm.

» The setting is saved.

Set the date and time

1

Press MENU/OK.

2

Select [Phone setup] > [Date &

time], then press MENU/OK to

conrm.

3

Press the numeric buttons to enter

the date, then press MENU/OK to

conrm.

» The time setting menu is

displayed on the handset.

4

Press the numeric buttons to enter

the time.

• If the time is in 12-hour format,

press / to select [am]

or [pm] (Country dependent).

5

Press MENU/OK to conrm.

Change the remote

access PIN code (for

M355)

Note

• The default answering machine remote

access PIN code is 0000 and it is important

to change it to ensure the security.

1

Press / or MENU/OK > [Answer

machine].

2

Select [Remote access] > [Change

PIN], then press MENU/OK to

conrm.

3

Enter the old PIN/passcode, then

press MENU/OK to conrm.

4

Enter the new PIN/passcode, then

press MENU/OK to conrm.

5

Enter the new PIN/passcode again,

then press MENU/OK to conrm.

» The setting is saved.

Charge the handset

Charge your handset by docking it in

either direction. When the handset is

placed correctly on the base station,

you hear a docking tone (see ‘Set the

docking tone’ on page 23). The

LED at the

back of the handset ashes once.

» The handset starts charging.

10

EN

Note

• Charge the batteries for 8 hours before rst

use.

• If the handset becomes warm when the

batteries are being charged, it is normal.

• Over time, capacity of batteries decreases.

This is a normal battery behavior.

Your phone is now ready to use.

Check the battery level

The battery icon displays the current

battery level.

When the handset is o

the base station, the bars

indicate the battery level

(full, medium and low).

When the handset is on

the base station/charger,

the bars keep scrolling until

charging is complete.

The empty battery icon

ashes. The battery is low

and needs recharging.

The handset turns o if the batteries

are empty. If you are on the phone,

you hear warning tones when the

batteries are almost empty. The call

gets disconnected after the warning.

What is standby mode?

Your phone is in standby mode when it

is idle. The standby screen displays the

handset name or date and time, and

handset number.

Display icons

In standby mode, the icons shown on

the main screen tell you what features

are available on your handset.

Icon Descriptions

When the handset is o the

base station/charger, the

bars indicate the battery

level (from full to low).

When the handset is on

the base station/charger,

the bars keep scrolling until

charging is complete.

The empty battery icon

ashes and you hear an alert

tone.

The battery is low and needs

recharging.

It displays the connection

status between the handset

and base station. The more

bars are shown, the better

the signal strength is.

It remains steadily on when

browsing answered incoming

calls in the call log.

It indicates an outgoing call

in the redial list.

It ashes when there is a new

missed call or when browsing

the unread missed calls in

call log.

It remains steadily on when

browsing the read missed

calls in call log.

It ashes when receiving

incoming call.

It remains steadily on when

you are in a call.

The speaker is on.

The ringer is o.

11EN

The alarm is activated.

Answering machine (M355

only): it ashes when there is

a new message or when the

memory is full. It is displayed

when the telephone

answering machine is turned

on.

It ashes when there is a new

voice message.

It remains steadily on when

the voice messages are

already viewed in the call log.

The icon is not shown when

there is no voice message.

/

It is displayed when you

scroll up / down a list or

increase / decrease the

volume.

There are more digits on the

right. Press REDIAL/C to

read.

ECO+ The ECO+ mode is activated.

Check the signal

strength

The number of bars

indicates the connection

status between the handset

and base station. The more

bars are shown, the better

the connection is.

• Make sure the handset is

connected to the base station

before you make or receive calls

and carry out the phone functions

and features.

• If you hear warning tones when

you are on the phone, the handset

is almost out of battery or the

handset is out of range. Charge

the battery or move the handset

nearer to the base station.

Note

• When ECO+ is on, the signal strength is not

displayed.

Switch the handset on

or o

Press and hold to switch the

handset on or o.

12

EN

4 Calls

Note

• When the power fails, the phone cannot

access emergency services.

Tip

• Check the signal strength before you make a

call or when you are in a call (see ‘Check the

signal strength’ on page 11).

Make a call

You can make a call in these ways:

• Normal call

• Predial call

You can also make a call from the

redial list (see ‘Redial a call’ on page

22), phonebook list (see ‘Call from

the phonebook’ on page 18) and

call log (see ‘Return a call’ on page

21).

Normal call

1

Press or .

2

Dial the phone number.

» The number is dialed out.

» The duration of your current

call is displayed.

Predial call

1

Dial the phone number.

• To erase a digit, press

REDIAL/C.

• To enter a pause, press and

hold .

2

Press or to dial out the call.

Note

• The talk time of your current call is displayed

on the call timer.

• If you hear warning tones, the phone is

almost out of battery or out of range. Charge

the battery or move the phone close to the

base station.

Answer a call

When there is an incoming call, the

phone rings. Press or to answer

the call.

Warning

• When the handset rings or when the

handsfree is activated, keep the handset

away from your ear to avoid ear damage.

Note

• The caller ID service is available if you have

registered to the caller ID service with your

service provider.

Tip

• When there is a missed call, a notication

message appears.

Turn o the ringer of the

current incoming call

When the phone rings, press REDIAL/C

to temporarily turn o the ringer of the

current incoming call.

13EN

End a call

You can end a call in these ways:

• Press ;

• Place the handset to the base

station or charging cradle.

Note

• Placing the handset to the base station or

charging cradle does not end the call when

the auto hangup feature is turned o.

Adjust the

earpiece/speaker

volume

Press / to adjust the volume

during a call.

» The earpiece/speaker volume is

adjusted and the phone is back

to the call screen.

Mute the microphone

1

Press / during a call.

» The handset displays [Mute

on].

» The caller cannot hear you, but

you can still hear his voice.

2

Press / again to unmute the

microphone.

» You can now communicate with

the caller.

Turn the speaker on or

o

Press .

Make a second call

Note

• This service is network dependent.

1

Press during a call.

» The rst call is put on hold.

2

Dial the second number.

» The number displayed on the

screen is dialed out.

Answer a second call

Note

• This service is network dependent.

When there is a periodical beep to

notify you of an incoming call, you can

answer the call in these ways:

1

Press and to answer the call.

» The rst call is put on hold, and

you are now connected to the

second call.

2

Press and to end the current

call and answer the rst call.

Switch between two

calls

Note

• This service is network dependent.

Press and .

» The current call is put on hold,

and you are now connected to

the other call.

14

EN

Make a conference call

with the external callers

Note

• This service is network and country

dependent. Check with the service provider

for additional charges.

When you are connected to two calls,

press , then .

» The two calls are combined

and a conference call is

established.

15EN

5 Intercom and

conference

calls

An intercom call is a call to another

handset that shares the same base

station. A conference call involves a

conversation between you, another

handset user and the outside callers.

Make a call to another

handset

Note

• If the base station only has 2 registered

handsets, press and hold to make a call

to another handset.

1

Press and hold .

» The handsets available for

intercom are displayed.

2

Select a handset, then press

MENU/OK to conrm.

» The selected handset rings.

3

Press on the selected handset.

» The intercom is established.

4

Press to cancel or end the

intercom call.

Note

• If the selected handset is busy, [Unavailable]

is displayed on the handset screen.

While you are on the phone

You can go from one handset to

another during a call:

1

Press and hold .

» The current caller is put on

hold.

» For multi-handset versions, the

handsets available for intercom

are displayed, then go to step

2.

2

Select a handset number, then

press MENU/OK to conrm.

» Wait for the other side to

answer your call.

Switch between calls

Press and hold to switch between

the outside call and the intercom call.

Make a conference call

A 3-way conference call is between

you, another handset user and

the outside callers. It requires two

handsets to share the same base

station.

During an external call

1

Press and hold to initiate an

internal call.

» The external caller is put on

hold.

» For multi-handset versions, the

handsets available for intercom

16

EN

are displayed, then go to step

2.

» For two-handset versions, the

other handset rings, then go to

step 3.

2

Select a handset, then press

MENU/OK to conrm.

» The selected handset rings.

3

Press on the selected handset.

» The intercom is established.

4

Press MENU/OK.

» You are now in a 3-way

conference call with an external

call and a selected handset.

5

Press to end the conference

call.

Note

• Press to join an ongoing conference with

another handset if [Services] > [Conference]

is set to [Auto] (see chapter 'Services',

section 'Auto conference').

During the conference call

1

Press and hold to put the

external call on hold and go back

to the internal call.

» The external call is put on hold.

2

Press and hold MENU/OK to

establish the conference call

again.

Note

• If a handset hangs up during the conference

call, the other handset remains connected to

the external call.

17EN

6 Text and

numbers

You can enter text and numbers for

handset name, phonebook records,

and other menu items.

Enter text and numbers

1

Press once or several times on

the alphanumeric key to enter the

selected character.

2

Press REDIAL/C to delete

a character. Press and hold

REDIAL/C to delete all characters.

Press / to move the

cursor left and right.

3

Press to add a space.

Note

• For information on key mapping of

characters and numbers, see the chapter

'Appendix'.

Switch between

uppercase and

lowercase

By default, the rst letter of each word

in a sentence is uppercase and the

rest is lowercase. Press and hold to

switch between the uppercase and

lowercase letters.

18

EN

7 Phonebook

This phone has a phonebook that

stores up to 50 records. You can

access the phonebook from the base

station. Each record can have a name

up to 14 characters long and a number

up to 24 digits long.

You have up to 2 direct access

memories (Keys 1 and 2). Depending

on your country, keys 1 and 2 are

preset to the voice mail number and

information service number of your

service provider respectively. When

you press and hold on the key in

standby mode, the saved phone

number is dialed automatically.

Note

• The availability of direct access memory is

country dependent.

View the phonebook

Note

• You can view the phonebook on one

handset only each time.

1

Press or press MENU/OK >

[Phonebook] > [View] > MENU/OK

to access the phonebook list.

2

Select a contact and view the

available information.

Search a record

You can search the phonebook

records in these ways:

• Scroll the contacts list.

• Enter the rst character of the

contact.

Scroll the contact list

1

Press or press MENU/OK >

[Phonebook] > [View] to access the

phonebook list.

2

Press and to scroll

through the phonebook list.

Enter the rst character of a

contact

1

Press or press MENU/OK >

[Phonebook] > [View] to access the

phonebook list.

2

Press the alphanumerical key that

matches the character.

» The rst record that starts with

this character is displayed.

Call from the

phonebook

1

Press or press MENU/OK >

[Phonebook] > [View] > MENU/OK

to access the phonebook list.

2

Select a contact in the phonebook

list.

3

Press to make the call.

Access the phonebook

during a call

1

Press MENU/OK.

2

Select the contact, then press

MENU/OK to view the number.

La pagina si sta caricando...

Philips M3501B/73 Manuale utente

Philips M3501B/73 Manuale utente

in altre lingue

Documenti correlati

Altri documenti