Topdon TC001 Manuale utente

TCView

Thermal Imaging Camera | User Manual

Caution

Section 4

Using TC001 with PC

Section 2

Product Overview

Section 6 FAQ

DE

29

31

43

48

30

32

47

EN

5

6

18

23

5

7

22

FR

51

53

65

70

52

54

69

ES

73

75

87

92

74

76

91

IT JP TC

117

119

131

136

118

120

135

161 183

163 185

175 197

180 202

162 184

164 186

179 201

95

97

109

114

96

98

113

140

142

153

158

141

143

157

PT RU

Section 1

What's in the Box?

Section 5

Specication

Section 3

Using TC001 with

Mobile Device

Contents

English

Caution

Section 1

What's in the Box?

005 | EN

Read all instructions before using.

Do not point the infrared camera at the sun or other strong energy sources for

long periods of time. This may cause damage to the detector in the camera.

Do not touch the lens with your hands. Do not knock, pry, puncture, or scratch

the lens.

Do not disassemble the unit.

TC001 Thermal

Imaging Camera

Quick User Guide

Multifunctional

Adapter Cable

Carrying Bag

Cleaning Cloth

Please keep the unit away from water to avoid leakage or short circuit.

Section 2

Type-C

Connector

Thermal Camera Indicator

Product Overview

Once the TC001 camera is connected to an external device, the LED

indicator will light up and remain solid blue.

006 | EN

Section 3

Figure 3.1.1 Figure 3.1.2

Using TC001 with Mobile Device

Preparation

Download and install the TC001 app

Connect the TC001 camera to an Android phone.

1.

2.

Go to the Google Play and search TC001.

Plug the TC001 into your phone directly(see gure 3.1.1).

Alternatively, you can go to www.topdon.com/products/tc001, and enter

the download page to install the TC001 app.

Or you can use the supplied adapter cable as an extension cable to

connect the TC001 to your phone (see gure 3.1.2).

007 | EN

Open the TC001 app. The icon at the top right of the home screen

displays "Connected" (see gure 3.1.3).

3.

At the bottom of the bar, tap to enter the photo/video

recording screen.

1.

Tap the camera button in the center of the bottom of the screen to take

and save a snapshot.

2.

Make sure the camera and storage permissions are enabled for the

TC001 app before using.

Taking Photo/Video

Thermal Imaging

Figure 3.1.3

008 | EN

Tap the record button in the lower right of the screen to switch to video

mode. Tap again to start and stop recording.

3.

To view the saved images/videos, tap on the thumbnail in the lower left

corner (see gure 3.2.1).

4.

Figure 3.2.1

At the bottom bar, tap to display measurement tool selections.

Select to add a point of reference.

Select to add a line (for hot spot and cold spot detection).

009 | EN

Adding/Removing Measurement Tools

010 | EN

Changing Color Palette

This function allows users to change the pseudo-color display of the

infrared image.

Follow the steps below to change the color palette:

Select to add a plane (for hot spot and cold spot detection).

Select add a center spot, hot spot and cold spot detection over the

entire image area.

Select to remove all measurement tools.

Figure 3.2.2

Image Setting

011 | EN

Tap to enter the image setting menu.

Tap to rotate the image.

Tap at the bottom bar.

Swipe right or left to select the desired palette.

1.

2.

Figure 3.2.3

Tap to adjust the image contrast.

Tap to open the camera of your phone and enable Image in

Image mode.

Tap to adjust the image sharpness.

Figure 3.2.4

012 | EN

To better display the details of the object, please select an appropriate

temperature range according to the expected temperature of the object you

are inspecting.

Temperature Range Setting

Tap to enter DIY mode. Then, enter the lower and upper

temperature limits. You can also change the color display of areas where the

temperature is out of the limits.

Figure 3.2.5

013 | EN

Tap to display temperature range options.

1.

Select Automatic Recognition/-20~150℃(-4~302 ℉)/150~550℃

(302~1022 ℉) according to your actual needs.

2.

Figure 3.2.6

In this module, real-time temperature data can be displayed in a graph,

allowing users to intuitively observe data changes.

Temperature Monitoring

014 | EN

Figure 3.3.1

Tap "Generate Image", and select the desired monitoring type as

prompted. Then, select the place to be monitored on the screen.

Tap "Start Recording". Real-time temperature of the measured object will

be displayed in a graph.

1.

2.

015 | EN

To view the captured images and videos, tap "Gallery" on the home screen, or

select the thumbnail image on the photo/video recoding screen to access the

Gallery.

Gallery

Figure 3.4.1

To ensure accuracy of measurement in different scenarios, this module allows

users to set Ambient Temperature, Distance to Spot and Emissivity in default

mode, or add custom modes and set the corresponding parameters.

9 commonly used emissivity values are listed on the screen for reference.

Please go to "Personal Information" and tap "Temperature Correction" to

enter the setting screen.

Temperature Correction

016 | EN

Figure 3.5.1

017 | EN

Section 4

Using TC001 with PC

Download and install the TCView software

Go to www.topdon.com/products/tc001, click “Download” to enter the

download page. Then download and install the TCView.

1.

Connect the TC001 camera to a PC using the supplied adapter cable (see

gure 4.1.1)

For PC with a Type-C port:

Connect the Type-C female end of the adapter cable to the TC001, and

connect the Type-C male end to your computer.

For PC with a USB-A port:

Connect the Type-C female end of the adapter cable to the TC001. Then,

plug the Type-C male end of the cable into the USB-A adapter and

connect the USB-A end to your computer.

2.

TCView

USB-A 3.0

USB Type-C

Type-C Female

Type-C Male

USB-A

018 | EN

Figure 4.1.1

Screen Description

About

Click to view the version information of the connected TC001 camera.

1.

019 | EN

1 5

4

9

8

2 63 7

Figure 4.2.1

Settings

The Settings function allows you to change color palette, emissivity,

distance and temperature unit.

Save

Click to save the current temperature array.

Measurement Tool Setting

2.

3.

4.

Figure 4.2.2

Select to add a line.

Select to remove all measurement tools.

Select to add a dot.

Select to add a plane.

020 | EN

La pagina si sta caricando...

Topdon TC001 Manuale utente

Topdon TC001 Manuale utente

in altre lingue

Documenti correlati

Altri documenti