TFA Digital thermo-hygrometer Manuale utente

Categoria
Sveglie
Tipo
Manuale utente
Bedienungsanleitung
Instruction manual
Mode d’emploi
Istruzioni per l'uso
Gebruiksaanwijzing
Instrucciones de uso
Kat. Nr. 30.5033
RoHS
TFA_No. 30.5033.02_Anleit_02_17 23.02.2017 14:30 Uhr Seite 1
B 1
B 2
B 3
B 4
Fig. 2
B 6
B 5
A 1
A 4
A 3
A 2
Fig. 1
32
TFA_No. 30.5033.02_Anleit_02_17 23.02.2017 14:30 Uhr Seite 2
Fig. 3
C 1
54
Digitales Thermo-Hygrometer
Vielen Dank, dass Sie sich für dieses Gerät aus dem Hause TFA entschieden haben.
1. Bevor Sie mit dem Gerät arbeiten
Lesen Sie sich bitte die Bedienungsanleitung genau durch. So werden Sie mit Ihrem
neuen Gerät vertraut, lernen alle Funktionen und Bestandteile kennen, erfahren wichtige
Details für die Inbetriebnahme und den Umgang mit dem Gerät und erhalten Tipps für
den Störungsfall.
Durch die Beachtung der Bedienungsanleitung vermeiden Sie auch Beschädigun-
gen des Gerätes und die Gefährdung Ihrer gesetzlichen Mängelrechte durch Fehl-
gebrauch.
Ebenso haften wir nicht für inkorrekte Messwerte und Folgen, die sich aus sol-
chen ergeben können.
Für Schäden, die aus Nichtbeachtung dieser Bedienungsanleitung verursacht wer-
den, übernehmen wir keine Haftung.
Beachten Sie besonders die Sicherheitshinweise!
2. Lieferumfang
Thermo-Hygrometer • Bedienungsanleitung
3. Einsatzbereich und alle Vorteile Ihres neuen Gerätes auf einen Blick
Zur Kontrolle von Innentemperatur und Luftfeuchtigkeit für ein gesundes Wohnklima
Mit Höchst- und Tiefstwerten
Uhrzeit
Alarm mit Snooze-Funktion
Stundensignal
Datumsanzeige
TFA_No. 30.5033.02_Anleit_02_17 23.02.2017 14:30 Uhr Seite 3
76
Digitales Thermo-Hygrometer
4. Zu Ihrer Sicherheit
Das Produkt ist ausschließlich für den oben beschriebenen Einsatzbereich geeignet.
Verwenden Sie das Produkt nicht anders, als in dieser Anleitung dargestellt wird.
Das eigenmächtige Reparieren, Umbauen oder Verändern des Gerätes ist nicht gestat-
tet.
Vorsicht!
Verletzungsgefahr:
Bewahren Sie das Gerät und die Batterie außerhalb der Reichweite von Kindern auf.
Batterien nicht ins Feuer werfen, kurzschließen, auseinander nehmen oder aufladen.
Explosionsgefahr!
Batterien enthalten gesundheitsschädliche Säuren. Um ein Auslaufen der Batterien zu
vermeiden, sollten schwache Batterien möglichst schnell ausgetauscht werden.
Beim Hantieren mit ausgelaufenen Batterien chemikalienbeständige Schutzhandschuhe
und Schutzbrille tragen!
Wichtige Hinweise zur Produktsicherheit!
Setzen Sie das Gerät keinen extremen Temperaturen, Vibrationen und Erschütterungen
aus.
Vor Feuchtigkeit schützen.
Digitales Thermo-Hygrometer
5. Bestandteile
A: Display:
A 1: Innentemperatur, MAX/MIN
A 2: Uhrzeit/Datum/Alarmzeit
A 3: Symbole Alarm + Stundenalarm
A 4: Innenluftfeuchtigkeit, MAX/MIN
B:Tasten:
B 1: SNOOZE Taste B 2: MODE Taste
B 3: UP Taste B 4: MEM Ta s t e
B 5: °C/°F Taste B 6: RESET Knopf
C: Gehäuse:
C 1: Ständer mit Batteriefach
6. Inbetriebnahme
Öffnen Sie das Batteriefach und legen Sie eine neue Batterie 1,5 V AA ein, +/- Pol wie
abgebildet.
Schließen Sie das Batteriefach wieder.
Es werden alle LCD Segmente kurz angezeigt.
Das Gerät ist jetzt betriebsbereit.
Im Display erscheint die aktuelle Innentemperatur und Luftfeuchtigkeit.
Über der Uhrzeit (12:00 Voreinstellung) erscheint AM.
Um das Gerät auszuschalten, entfernen Sie die Batterie.
TFA_No. 30.5033.02_Anleit_02_17 23.02.2017 14:30 Uhr Seite 4
98
Digitales Thermo-Hygrometer
7. Bedienung
Halten Sie die UP Taste im jeweiligen Einstellmodus gedrückt, gelangen Sie in den
Schnelllauf.
Das Gerät verlässt automatisch den Einstellmodus, wenn länger als 60 Sekunden keine
Taste gedrückt wird.
7.1 Einstellung der Uhrzeit und Kalender
Halten Sie die MODE Taste gedrückt.
Die Minutenanzeige blinkt.
Stellen Sie mit der UP Taste die Minuten ein.
Drücken Sie die MODE Taste noch einmal und Sie können nun nacheinander die Stun-
den, das 24- und 12-Stunden-Anzeigeformat (AM oder PM nach 12 Uhr erscheint im
Display), den Monat und den Tag ansteuern und mit der UP Taste einstellen.
Bestätigen Sie die Eingabe mit der MODE Taste.
Auf dem Display erscheint die eingestellte Uhrzeit.
7.2 Einstellung des Weckalarms
Drücken Sie die MODE Taste im Normalmodus, um in den Alarmmodus zu gelangen.
0:00 (Voreinstellung) oder die zuletzt eingestellte erste Weckzeit wird auf dem Display
angezeigt.
Halten Sie die MODE Taste gedrückt.
Das Alarmsymbol erscheint und die Minutenanzeige blinkt.
Stellen Sie mit der UP Taste die Minuten ein.
Bestätigen Sie die Eingabe mit der MODE Taste und stellen Sie die Stunden ein.
Bestätigen Sie die Eingabe mit der MODE Taste.
Digitales Thermo-Hygrometer
Auf dem Display erscheinen die eingestellte Weckzeit und das Alarmsymbol. Der Alarm
ist aktiviert.
Drücken Sie die MODE Taste noch einmal, um zur aktuellen Uhrzeit zurückzukehren.
Wenn die eingestellte Weckzeit erreicht ist, beginnt der Wecker zu klingeln.
Drücken Sie eine beliebige Taste und der Alarm wird beendet.
Wird der Alarm nicht unterbrochen, schaltet sich der ansteigende Alarmton automatisch
nach ein paar Minuten aus und aktiviert sich erneut zur gleichen Weckzeit wieder.
Das Alarmsymbol bleibt im Display stehen.
Wenn der Wecker klingelt, drücken Sie die SNOOZE Taste, um die Snooze-Funktion zu
aktivieren.
Der Alarm wird für die Dauer von 8 Minuten unterbrochen.
7.3 Aktivieren und Deaktivieren des Weckalarms und des stündlichen Alarmtons
Drücken Sie die MODE Taste im Normalmodus, um in den Alarmmodus zu gelangen.
Die eingestellte Alarmzeit erscheint.
Drücken Sie die UP Taste einmal, um den Alarm einzuschalten. Auf dem Display
erscheint das Symbol .
Drücken Sie die UP Taste zweimal, um den stündlichen Alarmton einzuschalten. Auf
dem Display erscheint das Symbol .
Drücken Sie die UP Taste dreimal, um den Alarm und den stündlichen Alarmton einzu-
schalten. Auf dem Display erscheint das Symbol und .
Drücken Sie die UP Taste viermal, um den Alarm und den stündlichen Alarmton auszu-
schalten. Die Symbole verschwinden.
Drücken Sie die MODE Taste, um in den Normalmodus zurückzukehren.
TFA_No. 30.5033.02_Anleit_02_17 23.02.2017 14:30 Uhr Seite 5
1110
Digitales Thermo-Hygrometer
7.4 Datumsanzeige
Drücken Sie die UP Taste im Normalmodus, um sich das Datum anzeigen zu lassen.
7.5 Temperaturanzeige
Drücken Sie die °C/°F Taste im Normalmodus, um zwischen °C (Celsius) auf °F (Fahren-
heit) als Temperatureinheit umzuschalten.
7.5 Höchst- und Tiefstwerte
Drücken Sie die MEM Taste.
MAX erscheint auf dem Display.
Die höchste Innentemperatur und Luftfeuchtigkeit seit der letzten Rückstellung werden
angezeigt.
Drücken Sie die MEM Taste noch einmal.
MIN erscheint auf dem Display.
Die niedrigste Innentemperatur und Luftfeuchtigkeit seit der letzten Rückstellung werden
angezeigt.
Um wieder die Anzeige mit den aktuellen Werten zu erhalten, drücken Sie die MEM
Taste noch einmal.
Das Gerät verlässt automatisch den MAX/MIN-Modus, wenn die MEM Taste nicht
gedrückt wird.
Halten Sie die MEM Taste gedrückt, wenn die maximalen oder minimalen Werte ange-
zeigt werden, um die entsprechenden Werte zu löschen.
8. Pflege und Wartung
Reinigen Sie das Gerät mit einem weichen, leicht feuchten Tuch. Keine Scheuer- oder
Lösungsmittel verwenden!
Digitales Thermo-Hygrometer
Entfernen Sie die Batterie, wenn Sie das Gerät längere Zeit nicht verwenden.
Bewahren Sie Ihr Gerät an einem trockenen Platz auf.
8.1 Batteriewechsel
Tauschen Sie die Batterie aus, wenn die Anzeige oder der Alarmton schwächer wird.
Öffnen Sie das Batteriefach und legen Sie eine neue Batterie 1,5 V AA ein, +/- Pol wie
abgebildet.
Schließen Sie das Batteriefach wieder.
9. Fehlerbeseitigung
Problem Lösung
Keine Anzeige auf dem Gerät Batterie polrichtig einlegen
RESET Knopf mit einem spitzen Gegenstand
drücken
Batterie wechseln
Unkorrekte Anzeige Batterie wechseln
Wenn Ihr Gerät trotz dieser Maßnahmen immer noch nicht funktioniert, wenden Sie sich an
den Händler, bei dem Sie das Produkt gekauft haben.
10. Entsorgung
Dieses Produkt wurde unter Verwendung hochwertiger Materialien und Bestandteile herge-
stellt, die recycelt und wiederverwendet werden können.
TFA_No. 30.5033.02_Anleit_02_17 23.02.2017 14:30 Uhr Seite 6
1312
Digitales Thermo-Hygrometer
Batterien und Akkus dürfen keinesfalls in den Hausmüll!
Als Verbraucher sind Sie gesetzlich verpflichtet, gebrauchte Batterien und
Akkus zur umweltgerechten Entsorgung beim Handel oder entsprechenden
Sammelstellen gemäß nationaler oder lokaler Bestimmungen abzugeben.
Die Bezeichnungen für enthaltene Schwermetalle sind: Cd=Cadmium,
Hg=Quecksilber, Pb=Blei
Dieses Gerät ist entsprechend der EU-Richtlinie über die Entsorgung von
Elektro- und Elektronik-Altgeräten (WEEE) gekennzeichnet.
Dieses Produkt darf nicht mit dem Hausmüll entsorgt werden. Der Nutzer ist
verpflichtet, das Altgerät zur umweltgerechten Entsorgung bei einer ausge-
wiesenen Annahmestelle für die Entsorgung von Elektro- und Elektronikge-
räten abzugeben.
11.Technische Daten
Spannungsversorgung: Batterie 1 x 1,5 V AA
Messbereich Temperatur: 0°C…+50°C (+32°F…+122°F) °C/°F umschaltbar
Messbereich Luftfeuchtigkeit: 20...90 % rF
Anzeige LL/HH: Messung liegt außerhalb des Messbereichs
Gehäusemaße: 94 x 37 x 94 mm
Gewicht: 95 g (nur das Gerät)
Digitales Thermo-Hygrometer
TFA Dostmann GmbH & Co.KG, Zum Ottersberg 12, D-97877 Wertheim.
Diese Anleitung oder Auszüge daraus dürfen nur mit Zustimmung von TFA Dostmann ver-
öffentlicht werden. Die technischen Daten entsprechen dem Stand bei Drucklegung und
können ohne vorherige Benachrichtigung geändert werden. Die neuesten technischen
Daten und Informationen zu Ihrem Produkt finden Sie unter Eingabe der Artikel-Nummer
auf unserer Homepage.
www.tfa-dostmann.de 02/17
TFA_No. 30.5033.02_Anleit_02_17 23.02.2017 14:30 Uhr Seite 7
1514
Digital thermo-hygrometer
Thank you for choosing this instrument from TFA.
1. Before you start using it
Please make sure to read the instruction manual carefully. This information will help
you to familiarise yourself with your new device, to learn all of its functions and parts, to
find out important details about its first use and how to operate it, and to get advice in
the event of faults.
Following and respecting the instructions in your manual will prevent damage to
your instrument and loss of your statutory rights arising from defects due to
incorrect use.
Likewise, we take no responsibility for any incorrect readings and for any conse-
quences which may result from them.
We shall not be liable for any damage occurring as a result of non-following of
these instructions.
Please take particular note of the safety advice!
Please keep this instruction manual for future reference.
2. Scope of delivery
Thermo-Hygrometer
• Instruction manual
3. Field of operation and all the benefits of your new instrument at a glance
For the control of indoor temperature and humidity to help create a healthy room climate
With maximum and minimum values
•Time
Digital thermo-hygrometer
Alarm with snooze function
Hourly chime
Display of date
4. For your safety
This product is exclusively intended for the field of application described above. It should
only be used as described within these instructions.
Unauthorized repairs, modifications or changes to the product are prohibited.
Caution!
Risk of injury:
Keep this instrument and the battery out of the reach of children.
Batteries must not be thrown into a fire, short-circuited, taken apart or recharged. Risk of
explosion!
Batteries contain harmful acids. Low batteries should be changed as soon as possible to
prevent damage caused by leaking.
Wear chemical-resistant protective gloves and glasses when handling leaking batteries.
Important information on product safety!
Do not place your product near extreme temperatures, vibrations or shocks.
Protect it from moisture.
TFA_No. 30.5033.02_Anleit_02_17 23.02.2017 14:30 Uhr Seite 8
1716
Digital thermo-hygrometer
5. Elements
A: Display:
A 1: Indoor temperature, MAX/MIN
A 2: Time, date, alarm
A 3: Symbol for the alarm and the hourly chime
A 4: Indoor humidity, MAX/MIN
B: Buttons:
B 1: SNOOZE button B 2: MODE button
B 3: UP button B 4: MEM button
B 5: °C/°F button B 6: RESET button
C: Housing:
C 1: Support with battery compartment
6. Getting started
Open the battery compartment and insert a new battery 1,5 V AA, ensure that the bat-
tery polarity is correct.
Close the battery compartment again.
All LCD segments will be displayed for a short moment.
The unit is ready for use.
The display shows the current indoor temperature and humidity.
Above the time (12:00 default) appears AM on the display.
Take out the battery to shut down the instrument.
Digital thermo-hygrometer
7. Operation
Press and hold UP button in the setting mode for fast running.
The instrument will automatically quit the setting mode if no button is pressed within 60
seconds.
7.1 Setting of the clock and calendar
Press and hold the MODE button.
The minute digits will be flashing.
Press the UP button to set the minutes.
Press the MODE button again and the setting sequence is shown as follows: Hours, 12-
hour or 24-hour display format (AM or PM after 12 h appears on the display) month and
day and adjust it with the UP button.
Confirm the setting with the MODE button.
The display shows the current time.
7.2 Setting of the alarm time
To enter the alarm mode, press the MODE button in normal mode.
0:00 (default) or the last adjusted alarm time appears on the display.
Press and hold MODE button.
The alarm symbol appears and the minute digits will be flashing.
Press the UP button to set the minutes.
Confirm the setting with the MODE button and set the hours in the same way.
Confirm the setting with the MODE button.
The display shows the adjusted alarm time and the alarm symbol. The alarm is activated.
Press the MODE button again to return to the current time.
TFA_No. 30.5033.02_Anleit_02_17 23.02.2017 14:30 Uhr Seite 9
1918
Digital thermo-hygrometer
When the adjusted alarm time is reached, the alarm will ring.
Press any button and the alarm function will stop working.
If the alarm is not stopped manually, the increasing alarm will automatically turn off after
certain minutes and will be reactivated at the same time.
The alarm symbol stays in the display.
When the alarm rings, press the SNOOZE button and the snooze function will be activat-
ed.
The alarm will be interrupted for 8 minutes.
7.3 Activate and deactivate the alarm time and the hourly chime
To enter the alarm mode, press the MODE button in normal mode.
The adjusted alarm time appears on the display.
Press the UP button once to activate the alarm. On the display appears the alarm sym-
bol .
Press the UP button twice to activate the hourly chime. On the display appears the sym-
bol for the hourly chime .
Press the UP button three times to activate the alarm and the hourly chime. On the dis-
play appear both symbols and .
Press the UP button four times to deactivate both alarms. Both symbols disappear.
Press the MODE button to return to normal mode.
7.4 Display of date
Press the UP button in normal mode to show the date.
Digital thermo-hygrometer
7.5 Temperature display
Press the °C/°F button to change between °C (Celsius) or °F (Fahrenheit) as tempera-
ture unit.
7.5 Maximum and minimum values
Press the MEM button.
MAX appears on the display.
The highest indoor temperature and humidity are displayed since the last reset.
Press the MEM button again.
MIN appears on the display.
The lowest indoor temperature and humidity are displayed since the last reset.
To go back to the present temperature and humidity display, press the MEM button once
more.
The instrument will automatically quit the MAX/MIN mode if no button is pressed.
Press and hold the MEM button in the respective mode to clear the recorded maximum
or minimum values.
8. Care and maintenance
Clean your instrument with a soft damp cloth. Do not use solvents or scouring agents.
Remove the battery if you do not use the product for a long period of time.
Keep the instrument in a dry place.
8.1 Battery replacement
Replace the battery when the display becomes weak or the alarm tone declines.
TFA_No. 30.5033.02_Anleit_02_17 23.02.2017 14:30 Uhr Seite 10
2120
Digital thermo-hygrometer
Open the battery compartment and insert a new battery 1,5 V AA, ensure that the bat-
tery polaritiy is correct.
Close the battery compartment again.
9. Troubleshooting
Problems Solution
No display on the device Ensure that the battery polarity is correct
Use a pin to press the RESET button
Change the battery
Incorrect indication Change the battery
If your device fails to work despite these measures contact the supplier from whom you pur-
chased it.
10.Waste disposal
This product has been manufactured using high-grade materials and components which
can be recycled and reused.
Never dispose of empty batteries and rechargeable batteries in household
waste.
As a consumer, you are legally required to take them to your retail store or
to an appropriate collection site depending on national or local regulations
in order to protect the environment.
The symbols for the heavy metals contained are:
Cd=cadmium, Hg=mercury, Pb=lead
Digital thermo-hygrometer
This instrument is labeled in accordance with the EU Waste Electrical and
Electronic Equipment Directive (WEEE).
Please do not dispose of this instrument in household waste. The user is
obligated to take end-of-life devices to a designated collection point for the
disposal of electrical and electronic equipment, in order to ensure environ-
mentally-compatible disposal.
11. Specifications
Power consumption: Battery 1 x 1.5 V AA
Measuring range temperature: 0°C…+50°C (+32°F…+122°F) °C/°F-reversible
Measuring range humidity: 20...90 % rH
Display shows LL/HH: Measuring is out of the range
Housing dimension: 94 x 37 x 94 mm
Weight: 95 g (instrument only)
TFA Dostmann GmbH & Co.KG, Zum Ottersberg 12, D-97877 Wertheim.
No part of this manual may be reproduced without written consent of TFA Dostmann. The
technical data are correct at the time of going to print and may change without prior notice.
The latest technical data and information about your product can be found by entering your
product number on our homepage.
www.tfa-dostmann.de 02/17
TFA_No. 30.5033.02_Anleit_02_17 23.02.2017 14:30 Uhr Seite 11
2322
Thermo-hygromètre digital
Nous vous remercions d'avoir choisi l'appareil de la Société TFA.
1. Avant d'utiliser l'appareil
Veuillez lire attentivement le mode d'emploi.. Vous vous familiariserez ainsi avec
votre nouvel appareil, vous découvrirez toutes les fonctions et tous les éléments qui le
composent, vous noterez les détails importants relatifs à sa mise en service et vous lirez
quelques conseils en cas de disfonctionnement.
En respectant ce mode d'emploi, vous éviterez d'endommager votre appareil et de
perdre vos droits résultant d'un défaut pour cause d'utilisation non-conforme.
De même, nous n’assumons aucune responsabilité pour des relevés incorrects et
les conséquences qu’ils pourraient engendrer.
Nous n'assumons aucune responsabilité pour des dommages qui auraient été
causés par le non-respect du présent mode d'emploi.
Suivez bien toutes les consignes de sécurité!
Conservez soigneusement le mode d'emploi!
2. Contenu de la livraison
Thermomètre-hygromètre • Mode d'emploi
3. Aperçu du domaine d'utilisation et tous les avantages de votre nouvel appareil
Pour le contrôle de la température ambiante et de l'humidité de l'air pour un climat inté-
rieur sain
Avec valeurs maximales et minimales
Horloge
Alarme avec fonction snooze
Signal de l’heure
Thermo-hygromètre digital
4. Pour votre sécurité
L'appareil est destiné uniquement à l'utilisation décrite ci-dessus. Ne l'utilisez jamais à
d'autres fins que celles décrites dans le présent mode d'emploi.
Vous ne devez en aucun cas réparer, démonter ou modifier l'appareil par vous-même.
Attention!
Danger de blessure:
Gardez l'appareil et la pile hors de la portée des enfants.
Ne jetez jamais les piles dans le feu, ne les court-circuitez pas, ne les démontez pas et
ne les rechargez pas. Risques d'explosion!
Les piles contiennent des acides nocifs pour la santé. Une pile faible doit être remplacée
le plus rapidement possible afin d'éviter une fuite.
Pour manipuler des piles qui ont coulé, utilisez des gants de protection chimique spécia-
lement adaptés et portez des lunettes de protection !
Conseils importants de sécurité du produit!
Évitez d’exposer l’appareil à des températures extrêmes, à des vibrations ou à des
chocs.
Protégez-le contre l'humidité.
TFA_No. 30.5033.02_Anleit_02_17 23.02.2017 14:30 Uhr Seite 12
2524
Thermo-hygromètre digital
5. Composants
A: Écran:
A 1: Température ambiante, MAX/MIN
A 2: Horloge, date, alarme
A 3: Symbole de l'alarme et symbole du signal de l’heure
A 4: Humidité intérieure, MAX/MIN
B:Touches:
B 1: Touche SNOOZE B 2: Touche MODE
B 3: Touche UP B 4: Touche MEM
B 5: Touche °C/°F B 6: Bouton RESET
C: Boîtier:
C 1: Support avec compartiment à pile
6. Mise en service
Ouvrez le compartiment à pile et insérez une nouvelle pile 1,5 V AA, pôles +/- comme
indiqué.
Refermez le compartiment à pile.
Tous les segments LCD s'allument.
Votre appareil est maintenant prêt à fonctionner.
La température actuelle intérieure et l’humidité sont toujours à l’écran.
À propos du temps (12:00 par défaut) AM apparaît à l’écran.
Pour éteindre votre appareil, retirez la pile.
Thermo-hygromètre digital
7. Utilisation
Maintenez la touche UP appuyée au mode de paramétrage pour accéder au défilement
rapide.
L'appareil quitte automatiquement le mode de paramétrage si aucune entrée n'a été
effectuée pendant 60 secondes.
7.1 Réglage de l'heure et du calendrier
Maintenez la touche MODE appuyée.
L’indicateur des minutes clignote
Réglez les minutes avec la touche UP.
Appuyez sur la touche MODE pour ajuster les heures, l'affichage de 12 heures (après 12
h PM apparaît sur l'écran) et de 24 heures, le mois et le jour sont réglables avec la tou-
che UP.
Validez au moyen de la touche MODE.
L'heure actuelle apparaît sur l’écran.
7.2 Réglage alarme de réveil
Appuyez sur la touche MODE en mode normal pour arriver au mode d’alarme.
0:00 (par défaut) ou l'heure d'alarme réglée précédemment apparaît sur l'affichage.
Maintenez la touche MODE appuyée.
Le symbole de l'alarme apparaît et l’indicateur des minutes clignote
Réglez les minutes avec la touche UP.
Validez au moyen de la touche MODE et procédez de la même manière pour le paramé-
trage des heures.
Validez au moyen de la touche MODE.
TFA_No. 30.5033.02_Anleit_02_17 23.02.2017 14:30 Uhr Seite 13
2726
Thermo-hygromètre digital
La dernière heure de l'alarme et le symbole d’alarme apparaissent sur l’écran. L’alarme
est activée.
Appuyez sur la touche MODE afin de retourner à affichage de l'heure actuelle.
Lorsque l'heure d'alarme fixée est atteinte, le réveil commence à sonner.
Appuyez sur une touche de votre choix pour que l’alarme soit désactivée.
Si l'alarme n'est pas coupée, elle s'arrêtera automatiquement après quelques minutes et
sera de nouveau active pour l'heure de réveil suivant.
Le symbole reste à l'écran.
Lorsque le réveil sonne, appuyez sur la touche SNOOZE pour activer la fonction snooze.
L’alarme s'interrompt pendant 8 minutes.
7.3 Activer et désactiver l’alarme et le signal de l’heure
Appuyez sur la touche MODE en mode normal pour arriver au mode d’alarme.
L'heure d'alarme réglée apparaît sur l’écran.
Appuyez une fois sur la touche UP pour activer l’alarme. Le symbole d’alarme appa-
raît.
Appuyez deux fois sur la touche UP pour activer le signal de l’heure. Le symbole de
signal de l’heure apparaît .
Appuyez trois fois sur la touche UP pour activer l’alarme et le signal de l’heure. Les sym-
boles et apparaissent.
Appuyez quatre fois sur la touche UP pour désactiver l’alarme et le signal de l’heure. Les
symboles désappariassent.
Appuyez sur la touche MODE afin de retourner au mode normale.
7.4 Affichage de la date
Appuyez sur la touche UP en mode normal, cela vous permet d’afficher la date.
Thermo-hygromètre digital
7.5 Affichage de la température
Appuyez sur la touche °C/°F en mode normal, vous pouvez maintenant sélectionner la
température en °C (Celsius) ou en °F (Fahrenheit).
7.5 Valeurs maximales et minimales
Appuyez sur la touche MEM.
MAX apparaît sur l'écran.
La température ambiante maximale et l'humidité maximale depuis la dernière réactuali-
sation apparaissent.
Appuyez sur la touche MEM.
MIN apparaît sur l'écran.
La température ambiante minimale et l'humidité minimale depuis la dernière réactualisa-
tion apparaissent.
Appuyez encore une fois sur la touche MEM et les valeurs actuelles apparaissent sur
l'écran.
L'appareil quitte automatiquement le mode MAX/MIN si aucune entrée n'a été effectuée.
Maintenez la touche MEM appuyée pour effacer les valeurs maximales et minimales
selon le mode correspondant.
8. Entretien et maintenance
Pour le nettoyage de l'appareil, utilisez un chiffon doux et humide. N’utilisez pas de sol-
vants ou d´agents abrasifs!
Enlevez la pile si vous n'utilisez pas votre appareil pendant une durée prolongée.
Conservez votre appareil dans un endroit sec.
TFA_No. 30.5033.02_Anleit_02_17 23.02.2017 14:30 Uhr Seite 14
2928
Thermo-hygromètre digital
8.1 Remplacement de la pile
Remplacez la pile si l’affichage ou la sonnerie de l'alarme s'affaiblissent.
Ouvrez le compartiment à pile et insérez une nouvelle pile 1,5 V AA, pôles +/- comme
indiqué.
Refermez le compartiment à pile.
9. Dépannage
Problème Solution
Aucun affichage sur l’écran Contrôlez la bonne polarité de pile
Appuyez sur la touche RESET à l'aide d'un objet
pointu
Changez la pile
Indication incorrecte Changez la pile
Si votre appareil ne fonctionne toujours pas malgré ces mesures, adressez-vous au ven-
deur auquel vous avez acheté votre appareil.
10.Traitement des déchets
Ce produit a été fabriqué avec des matériaux de construction de haute qualité qui peuvent
être recyclés et réutilisés
Les piles et accus usagés ne peuvent en aucun cas être jetés dans les
ordures ménagères ! En tant qu'utilisateur, vous avez l'obligation légale de
rapporter les piles et accus usagés à votre revendeur ou de les déposez
dans une déchetterie proche de votre domicile conformément à la régle-
mentation nationale et locale.
Thermo-hygromètre digital
Les métaux lourds sont désignés comme suit: Cd=cadmium, Hg=mercure,
Pb=plomb
Cet appareil est conforme aux normes de l'UE relatives au traitement des
déchets électriques et électroniques (WEEE).
L'appareil usagé ne doit pas être jeté dans les ordures ménagères. L’utilisateur
s’engage, pour le respect de l’environnement, à déposer l’appareil usagé dans
un centre de traitement agréé pour les déchets électriques et électroniques.
11. Caractéristiques techniques
Alimentation: Pile 1 x 1,5 V AA
Plage de mesure - température: 0°C…+50°C (+32°F…+122°F) °C/°F réversible
Plage de mesure - humidité: 20...90 % rH
LL/HH apparaît sur l'écran : Hors de portée de la gamme de mesure
Mesure de boîtier: 94 x 37 x 94 mm
Poids: 95 g (appareil seulement)
TFA Dostmann GmbH & Co.KG, Zum Ottersberg 12, D-97877 Wertheim.
La reproduction, même partielle du présent mode d'emploi est strictement interdite sans
l'accord explicite de TFA Dostmann. Les spécifications techniques de ce produit ont été
actualisées au moment de l'impression et peuvent être modifiées, sans avis préalable. Les
dernières données techniques et des informations concernant votre produit peuvent être
trouvées en entrant le numéro de l'article sur notre site.
www.tfa-dostmann.de 02/17
TFA_No. 30.5033.02_Anleit_02_17 23.02.2017 14:30 Uhr Seite 15
3130
Termo-igrometro digitale
Vi ringraziamo per aver scelto l'apparecchio della TFA.
1. Prima di utilizzare l'apparecchio
Leggete attentamente le istruzioni per l'uso. Avrete così modo di familiarizzare con il
vostro nuovo apparecchio, di scoprirne tutte le funzioni e le componenti, di apprendere
importanti dettagli sulla sua messa in funzione, di acquisire dimestichezza nel suo utiliz-
zo e di usufruire di alcuni validi consigli da seguire in caso di guasti.
Seguendo le istruzioni per l'uso, eviterete anche di danneggiare il dispositivo e di
pregiudicare, a causa di un utilizzo scorretto, i diritti del consumatore che vi spet-
tano per legge.
Allo stesso modo, non siamo responsabili per eventuali misurazioni errate e per le
conseguenze che ne possono derivare.
Decliniamo ogni responsabilità per i danni derivanti dal mancato rispetto delle
presenti istruzioni per l'uso.
Prestate particolare attenzione alle misure di sicurezza!
Conservate con cura queste istruzioni per l'uso!
2. La consegna include
Termo-igrometro digitale • Istruzioni per l'uso
3. Tutte le applicazioni e tutti i vantaggi del vostro nuovo apparecchio:
Controllo della temperatura e dell'umidità interna per un clima ambientale sano
Con valori massimi e minimi
Orologio
Allarme con funzione snooze
Termo-igrometro digitale
Allarme orario
Indicazione della data
4. Per la vostra sicurezza
Il prodotto è adatto esclusivamente agli utilizzi di cui sopra. Non utilizzate il prodotto in
maniera diversa da quanto descritto in queste istruzioni.
Non sono consentite riparazioni, alterazioni o modifiche non autorizzate del dispositivo.
Avvertenza!
Pericolo di lesioni:
Tenete il dispositivo e la batteria lontano dalla portata dei bambini.
Non gettare le batterie nel fuoco, non polarizzarle in maniera scorretta, non smontarle e
non cercare di ricaricarle. Pericolo di esplosione!
Le batterie contengono acidi nocivi per la salute. Sostituite quanto prima le batterie
quasi scariche, in modo da evitare che si scarichino completamente.
Quando si maneggiano batterie esaurite indossare sempre guanti resistenti alle sostan-
ze chimiche e occhiali di protezione.
Avvertenze sulla sicurezza del prodotto!
Non esporre l'apparecchio a temperature estreme, vibrazioni e urti.
Proteggere dall’umidità.
TFA_No. 30.5033.02_Anleit_02_17 23.02.2017 14:30 Uhr Seite 16
3332
Termo-igrometro digitale
5. Componenti
A: Display:
A 1: Temperatura interna MAX/MIN
A 2: Orologio, data, allarme
A 3: Simboli della sveglia e dell’ allarme orario
A 4: Umidità interna, MAX/MIN
B:Tasti:
B 1: Tasto SNOOZE B 2: Tasto MODE
B 3: Tasto UP B 4: Tasto MEM
B 5: Tasto °C/°F B 6: Bottone RESET
C: Struttura esterna:
C 1: Supporto con vano batteria
6. Messa in funzione
Aprire il vano batteria e inserire una batteria nuove tipo AA da 1,5 V, rispettando le cor-
retta polarità.
Richiudere il vano batteria.
Tutti i segmenti dell'LCD appaiono contemporaneamente.
L'apparecchio è pronto per l'uso.
Sul display appaiono la temperatura e l’umidità attuali.
Il simbolo AM appare sul display al di sopra dell’indicazione dell’ora (12:00 predefinito).
Per spegnere l'apparecchio, rimuovere la batteria.
Termo-igrometro digitale
7. Uso
Tenere premuto il tasto UP in modalità impostazione per procedere velocemente.
L'apparecchio esce automaticamente dalla modalità impostazione se non si preme
alcun tasto per più di 60 secondi.
7.1 Regolazione dell’ora e data
Premere il tasto MODE.
L'indicazione dei minuti inizia a lampeggiare.
Impostare i minuti desiderati con il tasto UP.
Premendo il tasto MODE è possibile modificare uno dopo l'altro le impostazioni per ora,
12 (AM o PM dopo mezzogiorno appare sul display) o 24 ore, mese e giorno. Impostare i
valori desiderati con il tasto UP.
Confermare con il tasto MODE.
Sul display viene visualizzata l'ora attuale
7.2 Regolazione dell’ora della sveglia
Premere il tasto MODE nella modalità normale per attivare la modalità di allarme.
0:00 (predefinito) o l'ultima ora della sveglia impostata vengono visualizzati sul display.
Tenere premuto il tasto MODE.
Il simbolo della sveglia appare e l'indicazione dei minuti iniziano a lampeggiare.
Impostare i minuti con il tasto UP.
Confermare con il tasto MODE e inserire l'ora procedendo nello stesso modo.
Confermare con il tasto MODE.
Sul display viene visualizzata l'ora della sveglia impostata e il simbolo. La funzione
dell’allarme è attivata.
Premere nuovamente il tasto MODE per ritornare alla visualizzazione dell'ora attuale.
TFA_No. 30.5033.02_Anleit_02_17 23.02.2017 14:30 Uhr Seite 17
3534
Termo-igrometro digitale
Quando l'orario di allarme inserito viene raggiunto, la sveglia comincia a suonare.
Per arrestare l’allarme, premere un tasto qualunque.
Se non viene interrotto, il segnale si disattiva automaticamente dopo pochi minuti e si
riattiva nuovamente alla stessa ora di sveglia.
Il simbolo resta fisso sul display.
Quando suona la sveglia innestare la funzione snooze con il tasto SNOOZE.
Il suono della sveglia verrà interrotto per 8 minuti.
7.3 Attivare e disattivare la funzione sveglia e l’allarme orario
Premere il tasto MODE nella modalità normale per attivare la modalità di allarme.
Sul display viene visualizzata l'orario di allarme.
Premere una volta il tasto UP per attivare l’allarme.
Sul display appare il simbolo .
Premere due volte il tasto UP per attivare l’allarme orario. Sul display appare il simbolo .
Premere tre volte il tasto UP per attivare l’allarme e l’allarme orario. Sul display vengono
visualizzati i simboli e .
Premere quattro volte il tasto UP per disattivare l’allarme e l’allarme orario. Sul display
scompaiono i simboli.
Premere il tasto MODE per ritornare alla visualizzazione dell’ora attuale.
7.4 Visualizzazione della data
Premendo il tasto UP nella modalità normale, è possibile visualizzare la data.
7.5 Visualizzazione della temperatura
Premendo il tasto °C/°F nella modalità normale, è possibile commutare la visualizzazio-
ne della temperatura da °C (Celsius) a °F (Fahrenheit).
Termo-igrometro digitale
7.5 Valori massimi e minimi
Premere il tasto MEM.
Sul display appare MAX.
Vengono visualizzate la temperatura interna massima e l'umidità dell'aria massima rag-
giunte dopo l´ultimo azzeramento.
Premere nuovamente il tasto MEM.
Sul display appare MIN.
Vengono visualizzate la temperatura interna minima e l'umidità dell'aria minima raggiun-
te dopo l´ultimo azzeramento.
Per tornare alla visualizzazione dei valori attuali, premere ancora una volta il tasto MEM.
L'apparecchio esce automaticamente dalla modalità MAX/MIN se non preme alcun
tasto.
Tenendo premuto il tasto MEM durante la visualizzazione dei valori massimi e minimi per
cancellarli.
8. Cura e manutenzione
Per pulire l'apparecchio utilizzare solo un panno morbido leggermente inumidito. Non
usare solventi o abrasivi.
Rimuovere la batteria, se non si utilizza l'apparecchio per un periodo prolungato.
Collocare il dispositivo in un luogo asciutto.
8.1 Sostituzione della batteria
Quando le indicazioni sul display o il segnale acustico di allarme diventano più deboli,
sostituite le batterie.
TFA_No. 30.5033.02_Anleit_02_17 23.02.2017 14:30 Uhr Seite 18
3736
Termo-igrometro digitale
Aprire il vano batteria e inserire una batteria nuove tipo AA da 1,5 V rispettando le cor-
retta polarità.
Richiudere il vano batteria.
9. Guasti
Problema Risoluzione del problema
Nessuna indicazione Inserire la batteria rispettando le corrette polarità
sul dispositivo Premere il tasto RESET con un oggetto appuntito
Sostituite la batteria
Indicazione non corretta Sostituite la batteria
Qualora il vostro apparecchio continui a non funzionare nonostante queste procedure, rivol-
getevi al rivenditore presso il quale lo avete acquistato.
10. Smaltimento
Questo prodotto è stato realizzato utilizzando materiali e componenti di alta qualità che
possono essere riciclati e riutilizzati
È assolutamente vietato gettate le batterie tra i rifiuti domestici.
In qualità di consumatori, siete tenuti per legge a consegnare le batterie
usate al negoziante o ad altri enti preposti al riciclaggio in conformità alle
vigenti disposizioni nazionali o locali, ai fini di uno smaltimento ecologico.
Le sigle dei metalli pesanti contenuti sono:
Cd=cadmio, Hg=mercurio, Pb=piombo
Termo-igrometro digitale
Questo apparecchio è etichettato in conformità alla Direttiva UE sullo smal-
timento delle apparecchiature elettriche ed elettroniche (WEEE).
Questo prodotto non deve essere smaltito insieme ai rifiuti domestici. Il con-
sumatore è tenuto a consegnare il vecchio apparecchio presso un punto di
raccolta per lo smaltimento di apparecchiature elettriche ed elettroniche ai
fini di uno smaltimento ecologico.
11. Dati tecnici
Alimentazione: Pila 1 x 1,5 V AA
Campo di misura - temperatura: 0°C…+50°C (+32°F…+122°F) °C/°F- commutabile
Campo di misura - umidità: 20...90 % rH
Sul display appare LL/HH: Fuori dal campo di misura
Dimensioni esterne: 94 x 37 x 94 mm
Peso: 95 g (solo apparecchio)
TFA Dostmann GmbH & Co.KG, Zum Ottersberg 12, D-97877 Wertheim.
È vietata la pubblicazione delle presenti istruzioni o di parti di esse senza una precedente
autorizzazione della TFA Dostmann. I dati tecnici corrispondono allo stato del prodotto al
momento della stampa e possono cambiare senza preavviso. È possibile trovare dati tecnici
e informazioni aggiornate sul prodotto inserendo il numero di articolo sul nostro sito.
www.tfa-dostmann.de 02/17
TFA_No. 30.5033.02_Anleit_02_17 23.02.2017 14:30 Uhr Seite 19
3938
Digitale thermo-hygrometer
Hartelijk dank dat u voor dit apparaat van de firma TFA hebt gekozen.
1. Voor u met het apparaat gaat werken
Leest u a.u.b. de gebruiksaanwijzing aandachtig door. Zo raakt u vertrouwd met uw
nieuw apparaat en leert u alle functies en onderdelen kennen, komt u belangrijke details
te weten met het oog op het in bedrijf stellen van het apparaat en de omgang ermee en
krijgt u tips voor het geval van een storing.
Door rekening te houden met wat er in de handleiding staat, vermijdt u ook
beschadigingen van het apparaat en riskeert u niet dat uw wettelijke rechten door
verkeerd gebruik niet meer gelden.
Ook zijn wij niet verantwoordelijk voor verkeerde metingen en de mogelijke gevol-
gen die daaruit voortvloeien.
Voor schade die wordt veroorzaakt doordat u geen rekening houdt met de handlei-
ding aanvaarden wij geen aansprakelijkheid.
Neem in elk geval acht op de veiligheidsinstructies !
Bewaar deze gebruiksaanwijzing a.u.b. goed!
2. Levering
Digitale thermo-hygrometer • Gebruiksaanwijzing
3. Hoe u uw nieuw apparaat kunt gebruiken en alle voordelen ervan in één oogopslag
Voor de controle van de binnentemperatuur en de luchtvochtigheid voor een gezond
woonklimaat
Met de maximum- en minimumwaarden
Tijd
Wekalarm met snooze functie
Digitale thermo-hygrometer
Alarm per uur
Weergave voor de datum
4. Voor uw veiligheid
Het product is uitsluitend geschikt voor de hierboven beschreven doeleinden. Gebruik
het product niet anders dan in deze handleiding is aangegeven.
Het eigenmachtig repareren, verbouwen of veranderen van het apparaat is niet toege-
staan.
Voorzichtig!
Kans op letsel:
Bewaar het apparaat en de batterij buiten de reikwijdte van kinderen.
Batterijen niet in het vuur gooien, niet kortsluiten, niet uit elkaar halen of opladen. Kans
op explosie!
Batterijen bevatten zuren die de gezondheid schaden. Zwakke batterijen moeten zo snel
mogelijk worden vervangen om lekkage van de batterijen te voorkomen.
Draag handschoenen die bestand zijn tegen chemicaliën en een beschermbril wanneer
u met uitgelopen batterijen hanteert!
Belangrijke informatie over de productveiligheid!
Stel het apparaat niet bloot aan extreme temperaturen, trillingen en schokken.
Tegen vocht beschermen.
TFA_No. 30.5033.02_Anleit_02_17 23.02.2017 14:30 Uhr Seite 20
1 / 1

TFA Digital thermo-hygrometer Manuale utente

Categoria
Sveglie
Tipo
Manuale utente