Vibe Monobox III Manuale utente

Categoria
Amplificatori audio per auto
Tipo
Manuale utente
ENGLISH
Copyright
All content included in this manual such as text, graphics, logos, icons, images and data, is the property of VIBE Technologies Ltd. and is protected by United Kingdom and International copyright laws.
Trademarks
VIBE, Turbo Port, Pressure Board, Super Driver, VIBE Pulse , VIBE Power, VIBE Digital, VP1, VP2, VP3, VP4, VIBE MAG Plugs, Ferrite Loaded, VIBE Solid Core, VIBE OCC, VIBE FLAT, BlackAir, BlackBox and ICC are all
trademarks of VIBE. Graphics and logos are trademarks or trade dress of VIBE Technologies Ltd or its su bsidiaries. VIBE's trademarks and trade dress may not be used in connection with any product or service that is not
VIBE's, in any manner that is likely to cause confusion among customers or in any manner that disparages or discredits VIBE. All other trade marks not owned by VIBE or its subsidiaries that appear in this manual are the
property of their respective owners, who may or may not be affiliated with, connected to, or sponsored by VIBE or its subsidiaries.
DISCLAIMER
VIBE DOES NOT REPRESENT OR WARRANT THAT THE INFORMATION CONTAINED IN THIS MANUAL IS COMPLETE OR CURRENT, AND THAT ALL SPECIFICATIONS AND INFORMATION CONTAINED WITHIN THIS MANUAL
ARE SUBJECT TO CHANGE WITHOUT NOTICE. VIBE RECOMMEND CAUTION WHEN LISTENING TO MUSIC REPRODUCED THROUGH VIBE EQUIPMENT. VIBE EQUIPMENT IS CAPABLE OF PRODUCING SOUND AND SOUND
PRESSURE LEVELS THAT CAN PERMANENTLY DAMAGE HEARING OF YOU AND THAT OF OTHERS. FOR SAFE AND ENJOYABLE LISTENING, THE SOUND SHOULD BE CLEAR WITHOUT DISTORTION AT A COMFORTABLE
VOLUME. BY USING ANY VIBE EQUIPMENT, YOU AGREE TO TAKE FULL RESPONSIBILITY FOR YOUR OWN SAFETY AND THE SAFETY OF OTHERS WHEN LISTENING TO MUSIC AT HIGH VOLUMES THROUGH EQUIPMENT YOU
HAVE PURCHASED. USE OF ANY VIBE EQUIPMENT CONSTITUTES AGREEMENT TO THIS DISCLAIMER.
FRANÇAIS
Droits d’auteur
Tout le contenu de ce manuel tel que texte, graphiques, logos, icônes, images et données sont la propriété de VIBE Technologies Ltd. et sont protégés par la loi britannique et internationale sur les droits d'auteur. La
compilation du contenu de ce manuel est la propriété exclusive de VIBE et est protégée par la loi britannique et internationale sur les droits d'auteur.
Marques déposées
Les marques VIBE, Turbo Port, Pressure Board, Super Driver, VIBE Pulse, VIBE Power, VIBE Digital, VP1, VP2, VP3, VP4, VIBE MAG Plugs, Ferrite Loaded, VIBE Solid Core, VIBE OCC, VIBE FLAT, BlackAir, BlackBox et ICC
sont toutes des marques déposées de VIBE. Les graphiques et logos sont des marques déposées ou de présentation de VIBE Technologies Ltd ou de ses filiales. Les marques déposées et de présentation de VIBE ne
peuvent être utilisées en association avec des produits ou des services n'appartenant pas à VIBE de sorte qu'il puisse y avoir confusion de la part des clients ou qui puisse dénigrer ou discréditer VIBE de quelque façon que
ce soit. Toutes les marques de fabrique qui ne sont pas la propriété de VIBE ou de ses filiales figurant sur ce site sont la propriété de leurs propriétaires respectifs, qui peuvent être ou ne pas être affiliés, liés ou
commandités par VIBE ou par ses filiales.
DÉNI DE RESPONSABILITÉ
VIBE N'OFFRE AUCUNE REPRÉSENTATION NI GARANTIE QUANT À L'EXHAUTIVITÉ OU À L'ACTUALITÉ DES INFORMATIONS FIGURANT DANS CE MANUEL. TOUTES LES SPÉCIFICATIONS ET INFORMATIONS CONTENUES DANS
CE MANUEL SONT SUJETTES À MODIFICATIONS SANS PRÉAVIS. VIBE VOUS RECOMMANDE DE FAIRE PREUVE DE PRUDENCE EN ÉCOUTANT DE LA MUSIQUE REPRODUITE AVEC UN APPAREIL VIBE. LES APPAREILS VIBE
SONT CAPABLES DE PRODUIRE DES NIVEAUX DE PRESSION SONORE QUI PEUVENT CAUSER DES DOMMAGES IRRÉVERSIBLES À VOTRE SENS DE L'OUIE OU À CELUI DES AUTRES. POUR JOINDRE LE PLAISIR D'ÉCOUTE À LA
SÉCURITÉ, LE SON PEUT ÊTRE RÉGLÉ À UN VOLUME CONFORTABLE TOUT EN RESTANT LIMPIDE ET SANS AUCUNE DISTORSION. L'UTILISATION D'UN APPAREIL VIBE, QUEL QU'IL SOIT, CONSTITUE L'ACCEPTATION DE
TOUTE LA RESPONSABILITÉ À L'ÉGARD DE VOTRE PROPRE SÉCURITÉ ET DE CELLE DES AUTRES LORSQUE VOUS ÉCOUTEZ DE LA MUSIQUE À UN VOLUME SONORE ÉLEVÉ AVEC UN APPAREIL DE VOTRE ACQUISITION.
L'UTILISATION D'UN APPAREIL VIBE QUEL QU'IL SOIT, CONSTITUE L'ACCEPTATION DES DISPOSITIONS DE CE DÉNI DE RESPONSABILITÉ.
ITALIANO
Copyright
L'intero contenuto di questo manuale, come per esempio i testi, la grafica, i logotipi, le icone, le immagini e i dati, è di proprietà di VIBE Technologies Ltd. ed è protetto dalle leggi internazionali e del Regno Unito sui diritti
d'autore. L'organizzazione di tutto il materiale contenuto nel manuale è proprietà esclusiva di VIBE ed è protetto dalle leggi internazionali e del Regno Unito sui diritti d'autore.
Marchi depositati
VIBE, Turbo Port, Pressure Board, Super Driver, VIBE Pulse, VIBE Power, VIBE Digital, VP1, VP2, VP3, VP4, VIBE MAG Plugs, VIBE MAG Plugs, Ferrite Loaded, VIBE Solid Core, VIBE OCC, VIBE FLAT, BlackAir, BlackBox e ICC
sono tutti marchi deposit ati di VIBE. Grafica, logotipi, sono marchi registrati o immagine aziendale di VIBE Tecnologie Ltd o delle sue controllate. È vietato utilizzare i marchi registrati e l'immagine aziendale di VIBE per
prodotti o servizi che non siano di VIBE, onde evitare d i creare situazioni fuorvianti per i clienti o di danneggiare o screditare VIBE. Tutti gli altri marchi depositati non di proprietà di VIBE o delle sue consociate che
compaiono in questo sito appartengono ai rispettivi proprietari, che possono essere conso ciati a, collegati a, o sponsorizzati da VIBE o dalle sue controllate o meno.
ESONERO DA RESPONSABILITÀ
VIBE NON RILASCIA DICHIARAZIONI O GARANZIE SULLA COMPLETEZZA O SULL'AGGIORNAMENTO DELLE INFORMAZIONI CONTENUTE NEL PRESENTE MANUALE. TUTTI I DATI TECNICI E LE INFORMAZIONI CONTENUTE
NEL PRESENTE MANUALE POSSONO ESSERE MODIFICATI SENZA PREAVVISO. VIBE SUGGERISCE PRUDENZA DURANTE L'ASCOLTO DI MUSICA RIPRODOTTA CON ATTREZZATURA VIBE. LE ATTREZZATURE VIBE SONO IN
GRADO DI RIPRODURRE LIVELLI DI PRESSIONE SONORA TALI DA DETERMINARE DANNI PERMANENTI ALL'UDITO. PER UN ASCOLTO PIACEVOLE E SICURO, IL SUONO DEVE ESSERE CHIARO E SENZA DISTORSIONI AL
GIUSTO VOLUME. NELL'UTILIZZARE QUALSIASI APPARECCHIO VIBE, L'UTENTE SI ASSUME LA PIENA RESPONSABILITÀ DELLA SICUREZZA PROPRIA E DEGLI ALTRI DURANTE L'ASCOLTO DELLA MUSICA A VOLUME ALTO CON
I SISTEMI ACQUISTATI. L'UTILIZZO DI QUALSIASI SISTEMA VIBE IMPLICA L'ACCETTAZIONE DEL PRESENTE
DEUTSCH
Copyright-Vermerk
Sämtliche Inhalte dieses Handbuchs wie Text, Grafiken, Firmenzeich en, Symbole, Bilder, Daten sind Eigentum von VIBE Technologies Ltd. und sind durch das Urheberrechtsgesetz Großbritanniens und die internationalen
Urheberrechtsabkommen geschützt. Die in diesem Handbuch erfolge Zusammenstellung von Inhalten ist ausschließliches Eigentum von VIBE und ist durch das Urheberrechtsgesetz Großbritanniens und die
internationaleUrheberrechtsabkommen geschützt.
Warenzeichen
VIBE, Turbo Port, Pressure Board, Super Driver, VIBE Pulse, VIBE Power, VIBE Digital, VP1, VP2, VP3, VP4, VIBE MAG Plugs, Ferrite Loaded, VIBE Solid Core, VIBE OCC, VIBE FLAT, BlackAir, BlackBox und ICC sind
Warenzeichen von VIBE. Die Grafiken und Firmenzeichen sind Warenzeichen bzw. Handelsformen von VIBE Technologies bzw. seinen Tochtergesellschaften. Die Verwendung der Warenzeichen und Handelsformen von VIBE
in Zusammenhang mit Produkten oder Dienstleistungen, die nicht zu VIBE gehören, welche dazu führen könnte, dass bei den Kunden Verwirrung entsteht oder die VIBE in irgendeiner Art herabsetzt oder in Misskredit bringt,
ist unzulässig. Alle sonstigen Warenzeichen auf dieser Webseite, die nicht Eigentum von VIBE bzw. einer Tochtergesellschaft sind, befinden sich im Eigentum der jeweiligen Rechtsinhaber, die mit VIBE oder einer ihrer
Tochtergesellschaften verbunden bzw. von ihr gesponsert sein können, dies aber nicht zwingend sind.
HAFTUNGSAUSSCHLUSS
VIBE ÜBERNIMMT KEINE GEWÄHR FÜR DIE VOLLSTÄNDIGKEIT ODER AKTUALITÄT DER IN DIESEM HANDBUCH ZUGÄNGLICHEN INFORMATIONEN. ALLE IN DIESEM HANDBUCH ENTHALTENEN SPEZIFIKATIONEN UND ALLE
INFORMATIONEN SIND FREIBLEIBEND. VIBE RÄT BEIM ANHÖREN DER DURCH DIE VIBE-GERÄTE REPRODUZIERTEN MUSIK ZUR VORSICHT. DIE VON DEN VIBE-GERÄTEN ERZEUGTEN SCHALLDRUCKPEGEL KÖNNEN UNTER
UMSTÄNDEN IHR GEHÖR BZW. DAS GEHÖR ANDERER DAUERHAFT SCHÄDIGEN. FÜR EINEN SICHEREN HÖRGENUSS SOLLTE DER TON BEI ANGENEHMER LAUTSTÄRKE KLAR UND UNVERZERRT SEIN. BEI DER VERWENDUNG
VON VIBE-GERÄTEN ÜBERNEHMEN SIE VOLLE VERANTWORTUNG FÜR IHRE EIGENE SICHERHEIT SOWIE DIE SICHERHEIT ANDERER BEIM ZUHÖREN VON LAUTSTARKER MUSIK MITTELS DER VON IHNEN ERWORBENEN
GERÄTE. DURCH DIE BENUTZUNG VON VIBE-GERÄTEN ERKLÄREN SIE SICH MIT DIESER HAFTUNGSAUSSCHLUSSKLAUSEL EINVERSTANDEN.
ESPAÑOL
Derechos de autor
Todo el contenido incluido en este manual, como texto, gráficos, logotipos, iconos, imágenes y datos, es la propiedad de VIBE Technologies Ltd y está protegido por las leyes de derechos de autor internacionales y del Reino
Unido. La recopilación de todo el contenido de este manual es propiedad exclusiva de VIBE y está protegido t anto por las leyes de derechos de autor internacionales como por las del Reino Unido.
Marcas registradas
VIBE, Turbo Port, Pressure Board, Super Driver, VIBE Pulse, VIBE Power, VIBE Digital, VP1, VP2, VP3, VP4, VIBE MAG Plugs, Ferrite Loaded, VIBE Solid Core, VIBE OCC, VIBE FLAT, BlackAir, BlackBox y ICC son marcas
registradas de VIBE. Los gráficos y logotipos son marcas registradas o la etiqueta comercial de VIBE Technologies Ltd o sus filiales. Las marcas registradas o la etiqueta comercial de VIBE no podrán ser utilizadas en
relación con cualquier producto o servicio que no sea de VIBE, ni de cualquier manera que pudiese causar confusión entre los clientes o que menospreciara o desacreditara a VIBE. El resto de marcas registradas que no
sean propiedad de VIBE o sus filiales y que aparezcan en este sitio son propiedad de sus respectivos propietarios que pueden estar, o no, afiliados, conectados o patrocinados por VIBE o sus filiales.
EXENCIÓN DE RESPONSABILIDAD
VIBE NO ASEGURA NI GARANTIZA QUE LA INFORMACIÓN ACCESIBLE EN ESTE MANUAL ESTÉ COMPLETA O SEA ACTUAL. TODAS LAS ESPECIFICACIONES Y LA INFORMACIÓN CONTENIDAS EN ESTE MANUAL ESTÁN
SUJETAS A CAMBIOS SIN PREVIO AVISO. VIBE RECOMIENDA PRECAUCIÓN AL ESCUCHAR MÚSICA REPRODUCIDA MEDIANTE EL EQUIPO VIBE. EL EQUIPO VIBE ES CAPAZ DE PRODUCIR UNOS NIVELES DE PRESIÓN DE
SONIDO QUE PODRÍAN DAÑAR SU SISTEMA AUDITIVO O EL DE OTROS. POR MOTIVOS DE SEGURIDAD Y PARA DISFRUTAR ESCUCHANDO MÚSICA, EL SONIDO TIENE QUE SER CLARO, SIN DISTORSIONES Y A UN VOLUMEN
CONFORTABLE. AL USAR CUALQUIER EQUIPO VIBE, ACEPTA LA TOTAL REPONSABILIDAD DE SU PROPIA SEGURIDAD Y LA SEGURIDAD DE OTROS AL ESCUCHAR MÚSICA A VOLUMEN ALTO CON EL EQUIPO QUE HA
COMPRADO. EL USO DE CUALQUIER EQUIPO VIBE CONSTITUYE UN CONSENTIMIENTO A ESTA EXENCIÓN DE RESPONSABILIDAD..
©2002-2004 VIBE Technologies Ltd. All Rights Reserved
Instruction Manual
To ensure maximum performance and safety, please follow this manual.
Please retain the manual for future reference after installation.
Manuel d’instructions
Afin d'assurer la performance et la sécurité maximale, il est conseillé de consulter les
instructions fournies et de garder le carnet même après l'installation pour éviter de futurs
problèmes.
Manuale di Istruzione
Per assicurare massime e la sicurezza, si prega di seguire questo manuale.
Si prega di trattenere questi instruzioni dopo l'installazione per il referimento nel futuro.
Bedienungsanleitung
Um die optimale Leistung und Sicherheit des Gerätes zu erhalten, folgen Sie bitte dieser
Bedienungsanleitung! Bitte bewahren Sie die Bedienungsanleitung nach dem
Einbau gut auf, um auch in der Zukunft Hinweise nachlesen zu können.
Manual de instrucciones
Para asegurar el buen funcionamiento y la seguridad, por favor, lea las instrucciones. Por
favor, guarde el manual para futuras referencias después de la instalación.
VIBE Technologies Ltd (UK)
Tel: +44 (0) 845 601 4507
www.vibeaudio.co.uk
2
VIBE MonoBox III Class AB Analogue Amplifier
TABLE OF CONTENTS
Introduction............................................................................................................................................3
About the Manual and Warranty..................................................................................................................3
VIBE ICC VENTS.......................................................................................................................................3
Recommended Amplifier Installation...........................................................................................................3
Product Description...............................................................................................................................4
Input Connections and Audio Controls.........................................................................................................4
Connections for Power and Speakers...........................................................................................................6
Applications............................................................................................................................................7
Single 4 Ohm Subwoofer Applications..........................................................................................................7
Twin 4 Ohm Subwoofers Applications (2 Ohm Loading).................................................................................8
Single Dual Voice Coil (4 Ohm) Subwoofer Applications (2 Ohm Loading)........................................................9
Electrical Connections for the MonoBox III................................................................................................10
Post-Installation...................................................................................................................................11
Setting the Crossover..............................................................................................................................11
Setting the Bass Enhance Plus……………………………………………………………………………………..11
Final System Checks................................................................................................................................12
Troubleshooting...................................................................................................................................13
Specifications.......................................................................................................................................14
15
VIBE MonoBox III Class AB Analogue Amplifier
...........................................................................................
...........................................................................................
...........................................................................................
...........................................................................................
...........................................................................................
...........................................................................................
...........................................................................................
...........................................................................................
...........................................................................................
...........................................................................................
...........................................................................................
...........................................................................................
...........................................................................................
...........................................................................................
...........................................................................................
...........................................................................................
...........................................................................................
...........................................................................................
...........................................................................................
...........................................................................................
...........................................................................................
...........................................................................................
...........................................................................................
...........................................................................................
...........................................................................................
...........................................................................................
14
VIBE MonoBox III Class AB Analogue Amplifier
SPECIFICATIONS
MonoBox III
10 Hz 50 kHz
112dB
<0.01%
200mv 6V
400 W
6000 W
1200
1200 W
335 x 222 x 60 mm
53A @ 1200 W
Frequency Response
Signal Noise Ratio
THD
Input Sensitivity
Low Level
RMS Power @ 4 Ohm
RMS Power @ 2 Ohm
Damping Factor
Maximum Power Output
Dimensions
Current Consumption at
Max Power
3
VIBE MonoBox III Class AB Analogue Amplifier
INTRODUCTION
The VIBE MonoBox III subwoofer amplifier features:
§ Full Range frequency response with low distortion and exceptional signal to noise performance
§ Advanced circuit design featuring full stability at 4 to 2 Ohm loading.
§ Variable low-pass and subsonic electronic crossovers with 24dB per octave slopes
§ Adjustable input level controls with ground loop isolation accepting a wide range of input signals
§ Fully adjustable Bass Enhance Plus facility
§ Remote turn-on with “soft start” muting to prevent turn on “thump”
§ Pulse-Width Modulated (PWM) MOSFET power supply with low AM RFI and protection circuits for
overheating and speaker shorts
§ Dedicated Microprocessor circuit for full amplifier protection modes.
§ Gold-plated input/output connectors and an external automotive-type fuse
§ Aluminium heat sink for efficient heat dissipation
§ Low profile, compact size for space-limited installations
ABOUT THE MANUAL AND WARRANTY
To start enjoying your new VIBE monoblock amplifier, please read the instructions listed in this manual. Keep all
instructions for future reference. Please fill out and send in the enclosed warranty card to protect your purchase
and aid in warranty service. Also, save your original sales receipt as proof of purchase.
VIBE ICC VENTS
The MonoBox amplifiers feature an ultra compact low profile design that utilizes ICC (Internal Convection
Cooling) Vents. Each MOSFET is individually clamped to the aluminium heat sink allowing maximum heat transfer
to be achieved through the internal cooling fins; the ICC vent allows the dissipation of the heat without affecting
the superior exterior aesthetics. It is very important not to block or impede the air flow to and from the ICC vents
as this may cause the unit to become very hot and go into a protection mode.
DO NOT BLOCK ICC VENTS OR THE AIR-FLOW TO THE ICC VENTS UNDER ANY CIRCUMSTANCES.
RECOMMENDED AMPLIFIER INSTALLATION
To achieve maximum performance and superior sonic quality from your MonoBox amplifier the following points
should be followed:
§ Mount the amplifier horizontally or vertically - NEVER upside down
§ Use VIBE Power 4 or Power 8 supply & ground cable (minimum)
§ Use VIBE REMOTE 18 FLAT LINES remote cable
§ Use VIBE FLAT2 OFC RCA interconnects
§ Use VIBE FLAT1 OCC Bass Specific RCA Interconnects
§ Use VIBE FLAT13 OFC solid core bass cable for subwoofer applications
4
VIBE MonoBox III Class AB Analogue Amplifier
PRODUCT DESCRIPTION
The VIBE MonoBox III amplifier provides 1×400 watts of power into a 4 Ohm Load and 1×600 watts of power
into a 2 Ohm load. This full featured model is an excellent choice for a variety of car audio subwoofer system
configurations.
The MonoBox III uses an unregulated MOSFET power supply for superior control of output wattage. A toroid-coil
transformer yields maximum power transfer with minimum heat loss. Careful attention to circuit design keeps AM
RFI at low levels, so you won't hear unwanted noise when the level is cranked up. Protection circuits safeguard
the amplifier when overheating and speaker shorts or improper load conditions occur.
All connections and controls for the MonoBox III are on the end panels and are easy to understand. We use gold-
plated RCA and barrier connectors to ensure the best electrical connection for your system. Included are external
automotive type fuses that are easy to replace.
INPUT CONNECTIONS AND AUDIO CONTROLS
The front panel of the MonoBox contains connections for RCA Inputs, Remote level control and Audio Controls as
shown on the figures below. The RCA Input Connections are gold-plated RCA jacks and are labelled as RIGHT and
LEFT.
Figure 1: MonoBox III Front Panel
1. Subsonic Filter 6. Bass Enhance Level Control
2. Remote Level Port 7. Gain Control
3. Low Pass Filter Control 8. High Level Input Socket
4. Filter Selector 9. RCA Input Jacks
5. Bass Enhance Frequency Control 10. RCA Output Jacks
13
VIBE MonoBox III Class AB Analogue Amplifier
TROUBLESHOOTING
Problem: No Audio
Solution:
§ Low or no remote turn-on voltage check remote connections at amplifier and source unit
§ Blown amplifier fuse replace with new fast-blow fuse (same rating)
§ Power wires not connected check battery and ground wiring at amplifier, and also check battery
connections
§ Speaker leads shorted check speaker continuity to ground it should not show a common ground
§ Speakers not connected or are blown check speaker connections at amplifier, measure coil impedance
Problem: Audio cycles on and off
Solution:
§ Thermal protection circuits are shutting the amplifier off check location for adequate ventilation; consult an
authorised VIBE Audio Dealer
Problem: Distorted Audio
Solution:
§ Gain is not set properly, or damaged speaker cones review setting gain; inspect each speaker cone for signs
of damage (i.e. frozen cone, burning smell etc.)
Problem: Audio lacks punch
Solution:
§ Speakers wired incorrectly, causing cancellation of bass frequencies check polarity of wires from amplifier
to each speaker as defined by the system design
Problem: Amplifier fuse keeps blowing
Solution:
§ Incorrect wiring or short circuit review installation and check all wiring connections
Problem: Whining or ticking noise in the audio with engine on
Solution:
§ Amplifier is picking up alternator noise or radiated noise. Turn down input gain; move audio cables away from
power wires. Check power and ground connections on amplifier install an in-line noise filter on source
unit’s power wire. Check alternator and/or voltage regulator test for weak battery or add water to battery
12
VIBE MonoBox III Class AB Analogue Amplifier
FINAL SYSTEM CHECKS
1. Start the engine and turn on the source unit. After a two-second delay, slowly increase the Volume
Control and listen to the audio. If you hear any noise, static, distortion or no sound at all, check the
connections, and also refer to Troubleshooting. Depending on your system design, the levels may
become quite loud even at low Volume Control settings. Until you get an "audio feel" of the system's
power, use care when adjusting controls.
2. Increase the volume and verify that the amplifier reproduces audio without distortion. If you hear
distortion, check the connections and verify that the Gain Control is set correctly. Another possibility is
damaged speakers or under-powered speakers. Once again refer to Troubleshooting for additional
help.
3. A distorting subwoofer is not as easily heard, listen for pops and visually check that the cone is not
moving at full excursion. If the amplifier at any enters into protection mode, turn the head unit off
and the main ignition and check the installation and operation of the unit.
5
VIBE MonoBox III Class AB Analogue Amplifier
Standard Controls
§ Remote Level Input
This input socket is for the connection of the external digital level controller.
§ Gain Control
This allows you to set the nominal operating level of the amplifier. The amplifier has an input range of 250mV
to 6V for the RCA inputs.
§ Low Pass Filter
This allows you to set the frequency at which the amplifier output will be filtered above this point. The filter
has a range of 30 250Hz with a 24dB slope per octave.
§ Subsonic Filter
This allows you to set a frequency at which the amplifier output will be filtered out below this point. The
filter has a range of 10 80Hz with a 24dB slope per octave.
§ Bass Enhance Plus
This feature offers up to 15dB of bass boost at any frequency between 30 125Hz with a fixed Q value of 2.
Variable frequency and level offers the ability to boost and shape the frequency response of the subwoofer
output.
6
VIBE MonoBox III Class AB Analogue Amplifier
CONNECTIONS FOR POWER AND SPEAKERS
Figure 2: MonoBox III Rear Panel
1. Mono Output
2. 2 x 25 Amp Fuses
3. Battery +12V Input
4. Remote Turn-on Input
5. Ground Input
11
VIBE MonoBox III Class AB Analogue Amplifier
POST-INSTALLATION
After completing the installation, follow these steps to set the Gain/Crossover Controls and then perform the
Final System Checks.
1. Turn the Gain Control all the way counter-clockwise (Min)
2. Turn the vehicle’s ignition switch to the ON position, and then turn the ON/OFF switch on the source
unit(s) to the ON position. Set all Tone or Equalisation controls to “flat” positions, and turn Loudness
off
3. Play your music source unit and set the Volume Control at 75% of full level. If the system uses an
equaliser, set it’s frequency controls to “flat” positions
4. Slowly increase the Gain Control. Stop when you hear a slight distortion of audio (beyond this point
the subwoofer driver voice coil is at risk of severe damage not covered by warranty)
SETTING THE CROSSOVER
The VIBE MonoBox III features fully adjustable crossovers, low pass and subsonic.
To set the crossover, follow these steps:
1. Using the Frequency (Hz) Control, select the desired frequency. Depending on the type of subwoofer
driver and enclosure the low pass filter should be set to achieve perfect integration between
subwoofer output and the rest of the car audio system.
2. Switching on the subsonic filter will enable a lower frequency limit to be set. The subwoofer output
can often be cleaned up in terms of clarity and definition if the subsonic output from the amplifier is
limited.
SETTING THE BASS ENHANCE PLUS
The VIBE MonoBox III features fully adjustable BASS ENHANCEMENT PLUS, this allows up to a 15dB boost at a
frequency between 30 125Hz. This feature can aid in maximising the output of any subwoofer enclosure, it can
be used to boost a poor region of the frequency response or to put emphasis on a chosen frequency area. The Q
of Bass ENHANCE PLUS is approximately fixed at 2.
To set this feature, follow either of these steps:
1. Apply a large amount of boost and sweep the frequency control, listen carefully to the output of
the subwoofer. Seek out an area of the subwoofer output that is clearly lower than the rest, this
is where this feature can be used to aid response. Back off the boost amount to give a smooth
overall subwoofer response.
2. Apply a large amount of boost and sweep the frequency control, listen for an increase in output
at a favoured frequency area. Adjust the boost amount to a desired level.
10
VIBE MonoBox III Class AB Analogue Amplifier
ELECTRICAL CONNECTIONS
7
VIBE MonoBox III Class AB Analogue Amplifier
APPLICATIONS
The MonoBox III is a monoblock amplifier capable of driving speaker loads between 4 and 2 ohm, this load can
consist of anything from 1 to 2 actual drive units. The following pages show some of the most common speaker
configurations for the MonoBox III amplifier.
SINGLE 4 OHM SUBWOOFER APPLICATIONS
8
VIBE MonoBox III Class AB Analogue Amplifier
TWIN 4 OHM SUBWOOFER APPLICATIONS (2 Ohm Loading)
9
VIBE MonoBox III Class AB Analogue Amplifier
DUAL VOICECOIL (4 OHM) SUBWOOFER APPLICATIONS
(2 Ohm Loading)
8
VIBE MonoBox III Class AB Analogue Amplifier
TWIN 4 OHM SUBWOOFER APPLICATIONS (2 Ohm Loading)
9
VIBE MonoBox III Class AB Analogue Amplifier
DUAL VOICECOIL (4 OHM) SUBWOOFER APPLICATIONS
(2 Ohm Loading)
10
VIBE MonoBox III Class AB Analogue Amplifier
ELECTRICAL CONNECTIONS
7
VIBE MonoBox III Class AB Analogue Amplifier
APPLICATIONS
The MonoBox III is a monoblock amplifier capable of driving speaker loads between 4 and 2 ohm, this load can
consist of anything from 1 to 2 actual drive units. The following pages show some of the most common speaker
configurations for the MonoBox III amplifier.
SINGLE 4 OHM SUBWOOFER APPLICATIONS
6
VIBE MonoBox III Class AB Analogue Amplifier
CONNECTIONS FOR POWER AND SPEAKERS
Figure 2: MonoBox III Rear Panel
1. Mono Output
2. 2 x 25 Amp Fuses
3. Battery +12V Input
4. Remote Turn-on Input
5. Ground Input
11
VIBE MonoBox III Class AB Analogue Amplifier
POST-INSTALLATION
After completing the installation, follow these steps to set the Gain/Crossover Controls and then perform the
Final System Checks.
1. Turn the Gain Control all the way counter-clockwise (Min)
2. Turn the vehicle’s ignition switch to the ON position, and then turn the ON/OFF switch on the source
unit(s) to the ON position. Set all Tone or Equalisation controls to “flat” positions, and turn Loudness
off
3. Play your music source unit and set the Volume Control at 75% of full level. If the system uses an
equaliser, set it’s frequency controls to “flat” positions
4. Slowly increase the Gain Control. Stop when you hear a slight distortion of audio (beyond this point
the subwoofer driver voice coil is at risk of severe damage not covered by warranty)
SETTING THE CROSSOVER
The VIBE MonoBox III features fully adjustable crossovers, low pass and subsonic.
To set the crossover, follow these steps:
1. Using the Frequency (Hz) Control, select the desired frequency. Depending on the type of subwoofer
driver and enclosure the low pass filter should be set to achieve perfect integration between
subwoofer output and the rest of the car audio system.
2. Switching on the subsonic filter will enable a lower frequency limit to be set. The subwoofer output
can often be cleaned up in terms of clarity and definition if the subsonic output from the amplifier is
limited.
SETTING THE BASS ENHANCE PLUS
The VIBE MonoBox III features fully adjustable BASS ENHANCEMENT PLUS, this allows up to a 15dB boost at a
frequency between 30 125Hz. This feature can aid in maximising the output of any subwoofer enclosure, it can
be used to boost a poor region of the frequency response or to put emphasis on a chosen frequency area. The Q
of Bass ENHANCE PLUS is approximately fixed at 2.
To set this feature, follow either of these steps:
1. Apply a large amount of boost and sweep the frequency control, listen carefully to the output of
the subwoofer. Seek out an area of the subwoofer output that is clearly lower than the rest, this
is where this feature can be used to aid response. Back off the boost amount to give a smooth
overall subwoofer response.
2. Apply a large amount of boost and sweep the frequency control, listen for an increase in output
at a favoured frequency area. Adjust the boost amount to a desired level.
12
VIBE MonoBox III Class AB Analogue Amplifier
FINAL SYSTEM CHECKS
1. Start the engine and turn on the source unit. After a two-second delay, slowly increase the Volume
Control and listen to the audio. If you hear any noise, static, distortion or no sound at all, check the
connections, and also refer to Troubleshooting. Depending on your system design, the levels may
become quite loud even at low Volume Control settings. Until you get an "audio feel" of the system's
power, use care when adjusting controls.
2. Increase the volume and verify that the amplifier reproduces audio without distortion. If you hear
distortion, check the connections and verify that the Gain Control is set correctly. Another possibility is
damaged speakers or under-powered speakers. Once again refer to Troubleshooting for additional
help.
3. A distorting subwoofer is not as easily heard, listen for pops and visually check that the cone is not
moving at full excursion. If the amplifier at any enters into protection mode, turn the head unit off
and the main ignition and check the installation and operation of the unit.
5
VIBE MonoBox III Class AB Analogue Amplifier
Standard Controls
§ Remote Level Input
This input socket is for the connection of the external digital level controller.
§ Gain Control
This allows you to set the nominal operating level of the amplifier. The amplifier has an input range of 250mV
to 6V for the RCA inputs.
§ Low Pass Filter
This allows you to set the frequency at which the amplifier output will be filtered above this point. The filter
has a range of 30 250Hz with a 24dB slope per octave.
§ Subsonic Filter
This allows you to set a frequency at which the amplifier output will be filtered out below this point. The
filter has a range of 10 80Hz with a 24dB slope per octave.
§ Bass Enhance Plus
This feature offers up to 15dB of bass boost at any frequency between 30 125Hz with a fixed Q value of 2.
Variable frequency and level offers the ability to boost and shape the frequency response of the subwoofer
output.
4
VIBE MonoBox III Class AB Analogue Amplifier
PRODUCT DESCRIPTION
The VIBE MonoBox III amplifier provides 1×400 watts of power into a 4 Ohm Load and 1×600 watts of power
into a 2 Ohm load. This full featured model is an excellent choice for a variety of car audio subwoofer system
configurations.
The MonoBox III uses an unregulated MOSFET power supply for superior control of output wattage. A toroid-coil
transformer yields maximum power transfer with minimum heat loss. Careful attention to circuit design keeps AM
RFI at low levels, so you won't hear unwanted noise when the level is cranked up. Protection circuits safeguard
the amplifier when overheating and speaker shorts or improper load conditions occur.
All connections and controls for the MonoBox III are on the end panels and are easy to understand. We use gold-
plated RCA and barrier connectors to ensure the best electrical connection for your system. Included are external
automotive type fuses that are easy to replace.
INPUT CONNECTIONS AND AUDIO CONTROLS
The front panel of the MonoBox contains connections for RCA Inputs, Remote level control and Audio Controls as
shown on the figures below. The RCA Input Connections are gold-plated RCA jacks and are labelled as RIGHT and
LEFT.
Figure 1: MonoBox III Front Panel
1. Subsonic Filter 6. Bass Enhance Level Control
2. Remote Level Port 7. Gain Control
3. Low Pass Filter Control 8. High Level Input Socket
4. Filter Selector 9. RCA Input Jacks
5. Bass Enhance Frequency Control 10. RCA Output Jacks
13
VIBE MonoBox III Class AB Analogue Amplifier
TROUBLESHOOTING
Problem: No Audio
Solution:
§ Low or no remote turn-on voltage check remote connections at amplifier and source unit
§ Blown amplifier fuse replace with new fast-blow fuse (same rating)
§ Power wires not connected check battery and ground wiring at amplifier, and also check battery
connections
§ Speaker leads shorted check speaker continuity to ground it should not show a common ground
§ Speakers not connected or are blown check speaker connections at amplifier, measure coil impedance
Problem: Audio cycles on and off
Solution:
§ Thermal protection circuits are shutting the amplifier off check location for adequate ventilation; consult an
authorised VIBE Audio Dealer
Problem: Distorted Audio
Solution:
§ Gain is not set properly, or damaged speaker cones review setting gain; inspect each speaker cone for signs
of damage (i.e. frozen cone, burning smell etc.)
Problem: Audio lacks punch
Solution:
§ Speakers wired incorrectly, causing cancellation of bass frequencies check polarity of wires from amplifier
to each speaker as defined by the system design
Problem: Amplifier fuse keeps blowing
Solution:
§ Incorrect wiring or short circuit review installation and check all wiring connections
Problem: Whining or ticking noise in the audio with engine on
Solution:
§ Amplifier is picking up alternator noise or radiated noise. Turn down input gain; move audio cables away from
power wires. Check power and ground connections on amplifier install an in-line noise filter on source
unit’s power wire. Check alternator and/or voltage regulator test for weak battery or add water to battery
14
VIBE MonoBox III Class AB Analogue Amplifier
SPECIFICATIONS
MonoBox III
10 Hz 50 kHz
112dB
<0.01%
200mv 6V
400 W
6000 W
1200
1200 W
335 x 222 x 60 mm
53A @ 1200 W
Frequency Response
Signal Noise Ratio
THD
Input Sensitivity
Low Level
RMS Power @ 4 Ohm
RMS Power @ 2 Ohm
Damping Factor
Maximum Power Output
Dimensions
Current Consumption at
Max Power
3
VIBE MonoBox III Class AB Analogue Amplifier
INTRODUCTION
The VIBE MonoBox III subwoofer amplifier features:
§ Full Range frequency response with low distortion and exceptional signal to noise performance
§ Advanced circuit design featuring full stability at 4 to 2 Ohm loading.
§ Variable low-pass and subsonic electronic crossovers with 24dB per octave slopes
§ Adjustable input level controls with ground loop isolation accepting a wide range of input signals
§ Fully adjustable Bass Enhance Plus facility
§ Remote turn-on with “soft start” muting to prevent turn on “thump”
§ Pulse-Width Modulated (PWM) MOSFET power supply with low AM RFI and protection circuits for
overheating and speaker shorts
§ Dedicated Microprocessor circuit for full amplifier protection modes.
§ Gold-plated input/output connectors and an external automotive-type fuse
§ Aluminium heat sink for efficient heat dissipation
§ Low profile, compact size for space-limited installations
ABOUT THE MANUAL AND WARRANTY
To start enjoying your new VIBE monoblock amplifier, please read the instructions listed in this manual. Keep all
instructions for future reference. Please fill out and send in the enclosed warranty card to protect your purchase
and aid in warranty service. Also, save your original sales receipt as proof of purchase.
VIBE ICC VENTS
The MonoBox amplifiers feature an ultra compact low profile design that utilizes ICC (Internal Convection
Cooling) Vents. Each MOSFET is individually clamped to the aluminium heat sink allowing maximum heat transfer
to be achieved through the internal cooling fins; the ICC vent allows the dissipation of the heat without affecting
the superior exterior aesthetics. It is very important not to block or impede the air flow to and from the ICC vents
as this may cause the unit to become very hot and go into a protection mode.
DO NOT BLOCK ICC VENTS OR THE AIR-FLOW TO THE ICC VENTS UNDER ANY CIRCUMSTANCES.
RECOMMENDED AMPLIFIER INSTALLATION
To achieve maximum performance and superior sonic quality from your MonoBox amplifier the following points
should be followed:
§ Mount the amplifier horizontally or vertically - NEVER upside down
§ Use VIBE Power 4 or Power 8 supply & ground cable (minimum)
§ Use VIBE REMOTE 18 FLAT LINES remote cable
§ Use VIBE FLAT2 OFC RCA interconnects
§ Use VIBE FLAT1 OCC Bass Specific RCA Interconnects
§ Use VIBE FLAT13 OFC solid core bass cable for subwoofer applications
ENGLISH
Copyright
All content included in this manual such as text, graphics, logos, icons, images and data, is the property of VIBE Technologies Ltd. and is protected by United Kingdom and International copyright laws.
Trademarks
VIBE, Turbo Port, Pressure Board, Super Driver, VIBE Pulse , VIBE Power, VIBE Digital, VP1, VP2, VP3, VP4, VIBE MAG Plugs, Ferrite Loaded, VIBE Solid Core, VIBE OCC, VIBE FLAT, BlackAir, BlackBox and ICC are all
trademarks of VIBE. Graphics and logos are trademarks or trade dress of VIBE Technologies Ltd or its su bsidiaries. VIBE's trademarks and trade dress may not be used in connection with any product or service that is not
VIBE's, in any manner that is likely to cause confusion among customers or in any manner that disparages or discredits VIBE. All other trade marks not owned by VIBE or its subsidiaries that appear in this manual are the
property of their respective owners, who may or may not be affiliated with, connected to, or sponsored by VIBE or its subsidiaries.
DISCLAIMER
VIBE DOES NOT REPRESENT OR WARRANT THAT THE INFORMATION CONTAINED IN THIS MANUAL IS COMPLETE OR CURRENT, AND THAT ALL SPECIFICATIONS AND INFORMATION CONTAINED WITHIN THIS MANUAL
ARE SUBJECT TO CHANGE WITHOUT NOTICE. VIBE RECOMMEND CAUTION WHEN LISTENING TO MUSIC REPRODUCED THROUGH VIBE EQUIPMENT. VIBE EQUIPMENT IS CAPABLE OF PRODUCING SOUND AND SOUND
PRESSURE LEVELS THAT CAN PERMANENTLY DAMAGE HEARING OF YOU AND THAT OF OTHERS. FOR SAFE AND ENJOYABLE LISTENING, THE SOUND SHOULD BE CLEAR WITHOUT DISTORTION AT A COMFORTABLE
VOLUME. BY USING ANY VIBE EQUIPMENT, YOU AGREE TO TAKE FULL RESPONSIBILITY FOR YOUR OWN SAFETY AND THE SAFETY OF OTHERS WHEN LISTENING TO MUSIC AT HIGH VOLUMES THROUGH EQUIPMENT YOU
HAVE PURCHASED. USE OF ANY VIBE EQUIPMENT CONSTITUTES AGREEMENT TO THIS DISCLAIMER.
FRANÇAIS
Droits d’auteur
Tout le contenu de ce manuel tel que texte, graphiques, logos, icônes, images et données sont la propriété de VIBE Technologies Ltd. et sont protégés par la loi britannique et internationale sur les droits d'auteur. La
compilation du contenu de ce manuel est la propriété exclusive de VIBE et est protégée par la loi britannique et internationale sur les droits d'auteur.
Marques déposées
Les marques VIBE, Turbo Port, Pressure Board, Super Driver, VIBE Pulse, VIBE Power, VIBE Digital, VP1, VP2, VP3, VP4, VIBE MAG Plugs, Ferrite Loaded, VIBE Solid Core, VIBE OCC, VIBE FLAT, BlackAir, BlackBox et ICC
sont toutes des marques déposées de VIBE. Les graphiques et logos sont des marques déposées ou de présentation de VIBE Technologies Ltd ou de ses filiales. Les marques déposées et de présentation de VIBE ne
peuvent être utilisées en association avec des produits ou des services n'appartenant pas à VIBE de sorte qu'il puisse y avoir confusion de la part des clients ou qui puisse dénigrer ou discréditer VIBE de quelque façon que
ce soit. Toutes les marques de fabrique qui ne sont pas la propriété de VIBE ou de ses filiales figurant sur ce site sont la propriété de leurs propriétaires respectifs, qui peuvent être ou ne pas être affiliés, liés ou
commandités par VIBE ou par ses filiales.
DÉNI DE RESPONSABILITÉ
VIBE N'OFFRE AUCUNE REPRÉSENTATION NI GARANTIE QUANT À L'EXHAUTIVITÉ OU À L'ACTUALITÉ DES INFORMATIONS FIGURANT DANS CE MANUEL. TOUTES LES SPÉCIFICATIONS ET INFORMATIONS CONTENUES DANS
CE MANUEL SONT SUJETTES À MODIFICATIONS SANS PRÉAVIS. VIBE VOUS RECOMMANDE DE FAIRE PREUVE DE PRUDENCE EN ÉCOUTANT DE LA MUSIQUE REPRODUITE AVEC UN APPAREIL VIBE. LES APPAREILS VIBE
SONT CAPABLES DE PRODUIRE DES NIVEAUX DE PRESSION SONORE QUI PEUVENT CAUSER DES DOMMAGES IRRÉVERSIBLES À VOTRE SENS DE L'OUIE OU À CELUI DES AUTRES. POUR JOINDRE LE PLAISIR D'ÉCOUTE À LA
SÉCURITÉ, LE SON PEUT ÊTRE RÉGLÉ À UN VOLUME CONFORTABLE TOUT EN RESTANT LIMPIDE ET SANS AUCUNE DISTORSION. L'UTILISATION D'UN APPAREIL VIBE, QUEL QU'IL SOIT, CONSTITUE L'ACCEPTATION DE
TOUTE LA RESPONSABILITÉ À L'ÉGARD DE VOTRE PROPRE SÉCURITÉ ET DE CELLE DES AUTRES LORSQUE VOUS ÉCOUTEZ DE LA MUSIQUE À UN VOLUME SONORE ÉLEVÉ AVEC UN APPAREIL DE VOTRE ACQUISITION.
L'UTILISATION D'UN APPAREIL VIBE QUEL QU'IL SOIT, CONSTITUE L'ACCEPTATION DES DISPOSITIONS DE CE DÉNI DE RESPONSABILITÉ.
ITALIANO
Copyright
L'intero contenuto di questo manuale, come per esempio i testi, la grafica, i logotipi, le icone, le immagini e i dati, è di proprietà di VIBE Technologies Ltd. ed è protetto dalle leggi internazionali e del Regno Unito sui diritti
d'autore. L'organizzazione di tutto il materiale contenuto nel manuale è proprietà esclusiva di VIBE ed è protetto dalle leggi internazionali e del Regno Unito sui diritti d'autore.
Marchi depositati
VIBE, Turbo Port, Pressure Board, Super Driver, VIBE Pulse, VIBE Power, VIBE Digital, VP1, VP2, VP3, VP4, VIBE MAG Plugs, VIBE MAG Plugs, Ferrite Loaded, VIBE Solid Core, VIBE OCC, VIBE FLAT, BlackAir, BlackBox e ICC
sono tutti marchi deposit ati di VIBE. Grafica, logotipi, sono marchi registrati o immagine aziendale di VIBE Tecnologie Ltd o delle sue controllate. È vietato utilizzare i marchi registrati e l'immagine aziendale di VIBE per
prodotti o servizi che non siano di VIBE, onde evitare d i creare situazioni fuorvianti per i clienti o di danneggiare o screditare VIBE. Tutti gli altri marchi depositati non di proprietà di VIBE o delle sue consociate che
compaiono in questo sito appartengono ai rispettivi proprietari, che possono essere conso ciati a, collegati a, o sponsorizzati da VIBE o dalle sue controllate o meno.
ESONERO DA RESPONSABILITÀ
VIBE NON RILASCIA DICHIARAZIONI O GARANZIE SULLA COMPLETEZZA O SULL'AGGIORNAMENTO DELLE INFORMAZIONI CONTENUTE NEL PRESENTE MANUALE. TUTTI I DATI TECNICI E LE INFORMAZIONI CONTENUTE
NEL PRESENTE MANUALE POSSONO ESSERE MODIFICATI SENZA PREAVVISO. VIBE SUGGERISCE PRUDENZA DURANTE L'ASCOLTO DI MUSICA RIPRODOTTA CON ATTREZZATURA VIBE. LE ATTREZZATURE VIBE SONO IN
GRADO DI RIPRODURRE LIVELLI DI PRESSIONE SONORA TALI DA DETERMINARE DANNI PERMANENTI ALL'UDITO. PER UN ASCOLTO PIACEVOLE E SICURO, IL SUONO DEVE ESSERE CHIARO E SENZA DISTORSIONI AL
GIUSTO VOLUME. NELL'UTILIZZARE QUALSIASI APPARECCHIO VIBE, L'UTENTE SI ASSUME LA PIENA RESPONSABILITÀ DELLA SICUREZZA PROPRIA E DEGLI ALTRI DURANTE L'ASCOLTO DELLA MUSICA A VOLUME ALTO CON
I SISTEMI ACQUISTATI. L'UTILIZZO DI QUALSIASI SISTEMA VIBE IMPLICA L'ACCETTAZIONE DEL PRESENTE
DEUTSCH
Copyright-Vermerk
Sämtliche Inhalte dieses Handbuchs wie Text, Grafiken, Firmenzeich en, Symbole, Bilder, Daten sind Eigentum von VIBE Technologies Ltd. und sind durch das Urheberrechtsgesetz Großbritanniens und die internationalen
Urheberrechtsabkommen geschützt. Die in diesem Handbuch erfolge Zusammenstellung von Inhalten ist ausschließliches Eigentum von VIBE und ist durch das Urheberrechtsgesetz Großbritanniens und die
internationaleUrheberrechtsabkommen geschützt.
Warenzeichen
VIBE, Turbo Port, Pressure Board, Super Driver, VIBE Pulse, VIBE Power, VIBE Digital, VP1, VP2, VP3, VP4, VIBE MAG Plugs, Ferrite Loaded, VIBE Solid Core, VIBE OCC, VIBE FLAT, BlackAir, BlackBox und ICC sind
Warenzeichen von VIBE. Die Grafiken und Firmenzeichen sind Warenzeichen bzw. Handelsformen von VIBE Technologies bzw. seinen Tochtergesellschaften. Die Verwendung der Warenzeichen und Handelsformen von VIBE
in Zusammenhang mit Produkten oder Dienstleistungen, die nicht zu VIBE gehören, welche dazu führen könnte, dass bei den Kunden Verwirrung entsteht oder die VIBE in irgendeiner Art herabsetzt oder in Misskredit bringt,
ist unzulässig. Alle sonstigen Warenzeichen auf dieser Webseite, die nicht Eigentum von VIBE bzw. einer Tochtergesellschaft sind, befinden sich im Eigentum der jeweiligen Rechtsinhaber, die mit VIBE oder einer ihrer
Tochtergesellschaften verbunden bzw. von ihr gesponsert sein können, dies aber nicht zwingend sind.
HAFTUNGSAUSSCHLUSS
VIBE ÜBERNIMMT KEINE GEWÄHR FÜR DIE VOLLSTÄNDIGKEIT ODER AKTUALITÄT DER IN DIESEM HANDBUCH ZUGÄNGLICHEN INFORMATIONEN. ALLE IN DIESEM HANDBUCH ENTHALTENEN SPEZIFIKATIONEN UND ALLE
INFORMATIONEN SIND FREIBLEIBEND. VIBE RÄT BEIM ANHÖREN DER DURCH DIE VIBE-GERÄTE REPRODUZIERTEN MUSIK ZUR VORSICHT. DIE VON DEN VIBE-GERÄTEN ERZEUGTEN SCHALLDRUCKPEGEL KÖNNEN UNTER
UMSTÄNDEN IHR GEHÖR BZW. DAS GEHÖR ANDERER DAUERHAFT SCHÄDIGEN. FÜR EINEN SICHEREN HÖRGENUSS SOLLTE DER TON BEI ANGENEHMER LAUTSTÄRKE KLAR UND UNVERZERRT SEIN. BEI DER VERWENDUNG
VON VIBE-GERÄTEN ÜBERNEHMEN SIE VOLLE VERANTWORTUNG FÜR IHRE EIGENE SICHERHEIT SOWIE DIE SICHERHEIT ANDERER BEIM ZUHÖREN VON LAUTSTARKER MUSIK MITTELS DER VON IHNEN ERWORBENEN
GERÄTE. DURCH DIE BENUTZUNG VON VIBE-GERÄTEN ERKLÄREN SIE SICH MIT DIESER HAFTUNGSAUSSCHLUSSKLAUSEL EINVERSTANDEN.
ESPAÑOL
Derechos de autor
Todo el contenido incluido en este manual, como texto, gráficos, logotipos, iconos, imágenes y datos, es la propiedad de VIBE Technologies Ltd y está protegido por las leyes de derechos de autor internacionales y del Reino
Unido. La recopilación de todo el contenido de este manual es propiedad exclusiva de VIBE y está protegido t anto por las leyes de derechos de autor internacionales como por las del Reino Unido.
Marcas registradas
VIBE, Turbo Port, Pressure Board, Super Driver, VIBE Pulse, VIBE Power, VIBE Digital, VP1, VP2, VP3, VP4, VIBE MAG Plugs, Ferrite Loaded, VIBE Solid Core, VIBE OCC, VIBE FLAT, BlackAir, BlackBox y ICC son marcas
registradas de VIBE. Los gráficos y logotipos son marcas registradas o la etiqueta comercial de VIBE Technologies Ltd o sus filiales. Las marcas registradas o la etiqueta comercial de VIBE no podrán ser utilizadas en
relación con cualquier producto o servicio que no sea de VIBE, ni de cualquier manera que pudiese causar confusión entre los clientes o que menospreciara o desacreditara a VIBE. El resto de marcas registradas que no
sean propiedad de VIBE o sus filiales y que aparezcan en este sitio son propiedad de sus respectivos propietarios que pueden estar, o no, afiliados, conectados o patrocinados por VIBE o sus filiales.
EXENCIÓN DE RESPONSABILIDAD
VIBE NO ASEGURA NI GARANTIZA QUE LA INFORMACIÓN ACCESIBLE EN ESTE MANUAL ESTÉ COMPLETA O SEA ACTUAL. TODAS LAS ESPECIFICACIONES Y LA INFORMACIÓN CONTENIDAS EN ESTE MANUAL ESTÁN
SUJETAS A CAMBIOS SIN PREVIO AVISO. VIBE RECOMIENDA PRECAUCIÓN AL ESCUCHAR MÚSICA REPRODUCIDA MEDIANTE EL EQUIPO VIBE. EL EQUIPO VIBE ES CAPAZ DE PRODUCIR UNOS NIVELES DE PRESIÓN DE
SONIDO QUE PODRÍAN DAÑAR SU SISTEMA AUDITIVO O EL DE OTROS. POR MOTIVOS DE SEGURIDAD Y PARA DISFRUTAR ESCUCHANDO MÚSICA, EL SONIDO TIENE QUE SER CLARO, SIN DISTORSIONES Y A UN VOLUMEN
CONFORTABLE. AL USAR CUALQUIER EQUIPO VIBE, ACEPTA LA TOTAL REPONSABILIDAD DE SU PROPIA SEGURIDAD Y LA SEGURIDAD DE OTROS AL ESCUCHAR MÚSICA A VOLUMEN ALTO CON EL EQUIPO QUE HA
COMPRADO. EL USO DE CUALQUIER EQUIPO VIBE CONSTITUYE UN CONSENTIMIENTO A ESTA EXENCIÓN DE RESPONSABILIDAD..
©2002-2004 VIBE Technologies Ltd. All Rights Reserved
Instruction Manual
To ensure maximum performance and safety, please follow this manual.
Please retain the manual for future reference after installation.
Manuel d’instructions
Afin d'assurer la performance et la sécurité maximale, il est conseillé de consulter les
instructions fournies et de garder le carnet même après l'installation pour éviter de futurs
problèmes.
Manuale di Istruzione
Per assicurare massime e la sicurezza, si prega di seguire questo manuale.
Si prega di trattenere questi instruzioni dopo l'installazione per il referimento nel futuro.
Bedienungsanleitung
Um die optimale Leistung und Sicherheit des Gerätes zu erhalten, folgen Sie bitte dieser
Bedienungsanleitung! Bitte bewahren Sie die Bedienungsanleitung nach dem
Einbau gut auf, um auch in der Zukunft Hinweise nachlesen zu können.
Manual de instrucciones
Para asegurar el buen funcionamiento y la seguridad, por favor, lea las instrucciones. Por
favor, guarde el manual para futuras referencias después de la instalación.
VIBE Technologies Ltd (UK)
Tel: +44 (0) 845 601 4507
www.vibeaudio.co.uk
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15

Vibe Monobox III Manuale utente

Categoria
Amplificatori audio per auto
Tipo
Manuale utente