Haier (9+12)HV03/R2 Istruzioni per l'uso

No, 0010518162

HSU-07HV03/R2

HSU-09HV03/R2

HSU-12HV03/R2

HSU-18HV03/R2

HSU-22HV03/R2

H2SM-18HV03/R2

H2SM-(9+12)HV03/R2

HSU-12HVA03/R2

HSU-09HV03/R2

HSU-12HV03/R2

HSU-18HV03/R2

HSU-22HV03/R2

H2SM-18HV03/R2

H2SM-(9+12)HV03/R2

X

0.21

0.175

0.306

0.152

0.065

0.349

0.212

HSU-12HVA03/R2

CE

Tutti i prodotti sono conformi alle seguenti normative europee:

- Direttiva 73/23/EEC Basso Voltaggio

- Direttiva 2006/95/EC Basso Voltaggio

- Direttiva 89/336/EEC Compatibilità elettromagnetica

- Direttiva 2004/108/EC Compatibilità elettromagnetica

ROHS

Il prodotto è conforme alla normativa 2002/95/EEC sulla restrizione d’uso di

sostanze inquinanti negli apparecchi elettrici ed elettronici.

WEEE

Informativa al consumatore come previsto dalla normativa europea

2002/96/CE riguardante i rifiuti di apparecchiature elettriche ed elettroniche.

SPECIFICHE DI SMALTIMENTO:

Il climatizzatore è contrassegnato con questo simbolo,

ciò significa che i prodotti elettrici ed elettronici non

possono essere smaltiti insieme ai rifiuti domestici non

differenziati. Non cercare di demolire il sistema da soli:

la demolizioni dei sistemi di condizionamento, nonché il

recupero del refrigerante, dell’olio e di qualsiasi altra

parte devono essere eseguiti da un installatore qualifi-

cato in conformità alla legislazione locale e nazionale

vigente in materia.I climatizzatori devo essere trattati presso una struttura spe-

cializzata nel riutilizzo, riciclaggio e recupero dei materiali. Il corretto smaltimen-

to del prodotto eviterà le possibili conseguenze negative all’ambiente e alla

salute dell’uomo. Per maggiori informazioni contattare l’installatore o le autori-

tà locali. Le batterie devono essere tolte dal telecomando e smaltite separata-

mente conformemente alla legislazione locale e nazionale vigente in materia.

CONFORMITÀ ALLE DIRETTIVE EUROPEE PER I MODELLI:

Haier Industrial Park, No.1 Haier Road, Qingdao, P.R.China

IT

CE

All the products are in conformity with the following European provision:

- Low Voltage Directive 73/23/EEC

- Low Voltage Directive 2006/95/EC

- Electromagnetic CompatibilitY 89/336/EEC

- Electromagnetic CompatibilitY 2004/108/EC

ROHS

The products are fulfilled with the requirements in the directive 2002/95/EEC of the

European parliament and of the council on the Restriction of the use of Certain Haz-

ardous Substances in Electrical and Electronic Equipment (EU RoHS Directive)

.

WEEE

In accordance with the directive 2002/96/CE of the European parliament,

herewith we inform the consumer about the disposal requirements of the

electrical and electronic products.

DISPOSAL REQUIREMENTS:

Your air conditioning product is marked with this sym-

bol. This means that electrical and electronic products

shall not be mixed with unsorted household waste.

Do not try to dismantle the system yourself: the dis-

mantling of the air conditioning system, treatment of

the refrigerant, of oil and of other part must be done

by a qualified installer in accordance with relevant

local and national legislation. Air conditioners must be

treated at a specialized treatment facility for re-use, recycling and recovery.

By ensuring this product is disposed of correctly, you will help to prevent

potential negative consequences for the environment and human health.

Please contact the installer or local authority for more information. Battery

must be removed from the remote controller and disposed of separately in

accordance with relevant local and national legislation.

EUROPEAN REGULATIONS CONFORMITY FOR THE MODELS:

EN

CE

Tous les produits sont conformes aux directives européennes suivantes:

- Directive 73/23/CEE Basse tension

- Directive 2006/95/CE Basse tension

- Directive 89/336/CEE Compatibilité électromagnétique

- Directive 2004/108/CE Compatibilité électromagnétique

ROHS

L'appareil est conforme à la directive 2002/95/CEE relative à la limitation de

l'utilisation de certains substances dangereuses dans les équipements élec-

triques et électroniques.

DEEE (WEEE)

Information au consommateur comme le prévoit la directive européenne

2002/96/CE relative aux déchets d'équipements électriques et électro-

niques.

SPECIFICATIONS POUR L'ELIMINATION:

Ce pictogramme, apposé sur le climatiseur, signifie

que les équipements électriques et électroniques ne

peuvent pas être éliminés avec les déchets ménagers

non triés. Ne pas essayer de démanteler l'équipement

soi-même: le démantèlement des systèmes de clima-

tisation, ainsi que la récupération du frigorigène, de

l'huile et de toute autre partie doivent être effectués

par un installateur qualifié conformément à la législa-

tion locale et nationale en vigueur en la matière. Les climatiseurs doivent être

traités dans un centre spécialisé dans la réutilisation, le recyclage et la valo-

risation des matériaux. L'élimination correcte de ces appareils permet d'évi-

ter les effets nocifs sur l'environnement et la santé humaine. Pour plus de

renseignements contacter l'installateur ou les autorités locales. Les piles doi-

vent être retirées de la télécommande et éliminées séparément, conformé-

ment à la législation locale et nationale en vigueur en la matière.

CONFORMITÉ AUX DIRECTIVES EUROPÉENNES POUR LES MODÈLES:

FR

Haier Industrial Park, No.1 Haier Road, Qingdao, P.R.China

CE

Todos los productos están en conformidad con las siguientes Normativas

Europeas:

- Bajo Voltaje directiva 73/23/EEC

- Bajo Voltaje directiva 2006/95/EC

- Compatibilidad electromagnética 89/336/EEC

- Compatibilidad electromagnética 2004/108/EC

ROHS

Los productos cumplen los requisitos de la directiva 2002/95/EEC del parla-

mento Europeo y el consejo regulador Del uso de materiales peligrosos en

equipamientos eléctricos Y electrónicos. (EU RoHS Directiva).

WEEE

De acuerdo con la directiva 2002/96/CE del parlamento Europeo, Informa-

mos al consumidor acerca del reciclage de los productos Electrónicos y

eléctricos.

REQUISITOS PARA LA ELIMINACIÓN:

Su acondicionador de aire está marcado con este

símbolo. Esto significa que los productos eléctricos y

electrónicos no deben mezclarse con el resto de resi-

duos domésticos no clasificados.

No intente desmontar el sistema usted mismo: El des-

mantelamiento del acondicionador de aire, así como

el tratamiento del refrigerante, aceite y otros compo-

nentes, debe ser efectuado por un instalador compe-

tente de acuerdo con las normas locales y nacionales aplicables. Los acon-

dicionadores de aire deben ser tratados en instalaciones especializadas para

su reutilización, reciclaje y recuperación. Al asegurarse de desechar este pro-

ducto de la forma correcta, està contribuyendo a evitar posibles consecuen-

cias negativas para el entorno y para la salud de las personas. Contacte, por

favor, con el instalador o con las autoridades locales para obtener más infor-

mación. Las pilas del control remoto deben extraerse y eliminarse por sepa-

rado y de acuerdo con la normativa local y nacional aplicable.

CONFORMIDAD EUROPEA DE LAS REGULACIONES PARA LOS MODELOS:

ES

Questo prodotto contiene gas fluorurati ad effetto serra inclusi nel Protocollo

di Kyoto. Non liberare tali gas nell’atmosfera.

Tipo di refrigerante: R410A

Valore GWP*: 1975

*

GWP = potenziale di riscaldamento globale

Compilare con inchiostro indelebile,

• 1 la carica di refrigerante di fabbrica del prodotto

• 2 la quantità di refrigerante aggiuntiva nel campo e

• 1+2 la carica di refrigerante totale

sull’etichetta di carica del refrigerante fornita con il prodotto

L’etichetta compilata deve essere collocata in prossimità della portata di cari-

ca del prodotto (ad esempio, nell’interno del coperchio della valvola d’inter-

cettazione).

A contiene gas fluorurati ad effetto serra inclusi nel protocollo di Kyoto

B carica di refrigerante di fabbrica del prodotto: vedi targhetta con il nome

dell’unità

C quantità di refrigerante aggiuntiva nel campo

D carica di refrigerante totale

E unità esterna

F cilindro del refrigerante e collettore di carica

INFORMAZIONI IMPORTANTI SUL REFRIGERANTE UTILIZZATO

Haier Industrial Park, No.1 Haier Road, Qingdao, P.R.China

1

1+2=

kg

R410A

2

kg

2=

1=

B

C

D

FE

kg

Contains fluorinated greenhouse gases

covered by the Kyoto Protocol

A

This product contains fluorinated greenhouse gases covered by the Kyoto

Protocol. Do not vent into the atmosphere.

Refrigerant type: R410A

GWP* value: 1975

*

GWP = global warming potential

Please fill in with indelible ink,

• 1 the factory refrigerant charge of the product

• 2 the additional refrigerant amount charged in the field and

• 1+2 the total refrigerant charge

on the refrigerant charge label supplied with the product.

The filled out label must be adhered in the proximity of the product charging

port (e.g. onto the inside of the stop valve cover).

A contains fluorinated greenhouse gases covered by the Kyoto Protocol

B factory refrigerant charge of the product: see unit name plate

C additional refrigerant amount charged in the field

D total refrigerant charge

E outdoor unit

F refrigerant cylinder and manifold for charging

IT

IMPORTANT INFORMATION REGARDING THE REFRIGERANT USED

EN

Ce produit contient des gaz à effet de serre fluorés encadrés par le protoco-

le de Kyoto. Ne pas laisser les gaz s’échapper dans l’atmosphère.

Type de réfrigérant: R410A

Valeur GWP*: 1975

*

GWP = potentiel de réchauffement global

Prière de compléter à l’encre indélébile,

• 1 la charge de réfrigérant d’usine du produit

• 2 la quantité de réfrigérant supplémentaire chargée sur place et

• 1+2 la charge de réfrigérant totale

sur l’étiquette de charge de réfrigérant fournie avec le produit.

L’étiquette complétée doit être apposée à proximité de l’orifice de recharge

du produit (par ex. à l’intérieur du couvercle de la vanne d’arrêt).

A contient des gaz à effet de serre fluorés encadrés par le protocole de

Kyoto

B charge de réfrigérant d’usine du produit: voir plaquette signalétique de

l’unité

C quantité de réfrigérant supplémentaire chargée sur place

D charge de réfrigérant totale

E unité extérieure

F cylindre de réfrigérant et collecteur de recharge

INFORMATION IMPORTANTE RELATIVE AU RÉFRIGÉRANT UTILISÉ

FR

Haier Industrial Park, No.1 Haier Road, Qingdao, P.R.China

1

1+2=

kg

R410A

2

kg

2=

1=

B

C

D

FE

kg

Contains fluorinated greenhouse gases

covered by the Kyoto Protocol

A

Este producto contiene los gases fluorados de efecto invernadora regulados

por el Protocolo de Kioto. No vierta gases a la atmósfera.

Tipo de refrigerante: R410A

Valor GWP*: 1975

*

GWP = Potencial de calentamiento global

Rellene con tinta indeleble,

• 1 la carga de refrigerante de fábrica del producto

• 2 la cantidad adicional de refrigerante cargado en campo y

• 1+2 la carga total de refrigerante

En la etiqueta de carga de refrigerante suministrada con el producto.

La etiqueta rellenada debe pegarse cerca de la conexión de carga del pro-

ducto (p.ej. en el interior de la cubierta de la válvula de tope).

A Contiene los gases fluorados de efecto invernadora regulados por el

Protocolo de Kioto

B Carga de refrigerante de fábrica del producto: véase placa de especifi-

caciones técnicas de la unidad

C Cantidad adicional de refrigerante cargado en campo

D Carga total de refrigerante

E Unidad exterior

F Cilindro del refrigerante y dosificador de carga

INFORMACIÓN IMPORTANTE EN RELACIÓN AL REFRIGERANTE UTILIZADO

ES

2

-21

9

22-26

Cautions

Parts and functions

Operation

Maintenance

Trouble shooting

Contents

-5

6-8

27

1

Before disposing an old air conditioner that

goes out of use, please make sure it's inop-

erative and safe. Unplug the air conditioner

in order to avoid the risk of child entrapment.

It must be noticed that air conditioner system

contains refrigerants, which require speciali-

zed waste disposal. The valuable materials

contained in an air conditioner can be recycled

.Contact your local waste disposal center for

proper disposal of an old air conditioner and

contact your local authority or your dealer if

you have any question. Please ensure that

the pipework of your air conditioner does not

get damagedprior to being picked up by the

relevant waste disposal center, and contribute

to environmental awareness by insisting on an

appropriate, anti-pollution method of disposal.

Cautions

Disposal of the old air conditioner

All the packaging materials employed in the

package of your new air conditioner may be

disposed without any danger to the

environment.

The cardboard box may be broken or cut into

smaller pieces and given to a waste paper

disposal service. The wrapping bag made of

polyethylene and the polyethylene foam pads

contain no fluorochloric hydrocarbon.

All these valuable materials may be taken to

a waste collecting center and used again after

adequate recycling.

Consult your local authorities for the name

and address of the waste materials collecting

centers and waste paper disposal services

nearest to your house.

Disposal of the packaging of your

new air conditioner

Before starting the air conditioner, read the

information given in the User's Guide caref-

ully. The User's Guide contains very impor-

tant observations relating to the assembly,

operation and maintenance of the air

conditioner.

The manufacturer does not accept respon-

sibility for any damages that may arise due

to non-observation of the following

instruction.

Damaged air conditioners are not to be

put into operation. In case of doubt, consult

your supplier.

Use of the air conditioner is to be carried

out in strict compliance with the relative

instructions set forth in the User's Guide.

Installation shall be done by professional

people, don't install unit by yourself.

For the purpose of the safety,the air con-

ditioner must be properly grounded in acco-

rdance with specifications.

Always remember to unplug the air

conditioner before openning inlet grill. Never

unplug your air conditioner by pulling on

the power cord. Always grip plug firmly and

pull straight out from the outlet.

All electrical repairs must be carried out

by qualified electricians. Inadequate repairs

may result in a major source of danger for

the user of the air conditioner.

Safety Instructions and Warnings

Do not damage any parts of the air

conditioner that carry refrigerant by piercing

or performating the air conditioner's tubes

with sharp or pointed items, crushing or

twisting any tubes, or scraping the coatings

off the surfaces. If the refrigerant spurts

out and gets into eyes, it may result in

serious eye injuries.

2

3. If the fuse of indoor unit on PC board is

broken,please change it with the type of

T. 3.15A/ 250V. If the fuse of outdoor

unit is broken,change it with the type of

T.25A/250V

Do not obstruct or cover the ventilation

grille of the air conditoner.Do not put fingers

or any other things into the inlet/outlet and

swing louver.

Do not allow children to play with the air

conditioner.In no case should children be

allowed to sit on the outdoor unit.

The refrigerating circuit is leak-proof.

1.Applicable ambient temperature range:

Cooling

Indoor

Maximum:D.B/W.B

32

o

C/23

o

C

24

o

C/18

o

C

-7

o

C

43

o

C/26

o

C

18

o

C

27

o

C

15

o

C

18

o

C/14

o

C

Maximum:D.B/W.B

Minimum:D.B

Maximum:D.B

Minimum:D.B

Minimum:D.B/W.B

Maximum:D.B/W.B

Minimum:D.B/W.B

Outdoor

Indoor

Outdoor

Heating

Specifications

The machine is adaptive in following

situation

10 .The power plug and connecting cable

must have acquired the local attestation.

2. If the power supply cord is damaged, it

must be replaced by the manufacturer

or its service agent or a similar qualified

person.

4. The wiring method should be in line with

the local wiring standard.

5. After installation, the power plug should

be easily reached.

6. The waste battery should be disposed

properly.

7. The appliance is not intended for use

by young children or infirm persons

without supervision.

8. Young children should be supervised

to ensure that they do not play with

the applience.

9.Please employ the proper power plug,

which fit into the power supply cord.

Cautions

11.In order to protect the units,please turn

off the A/C first, and at least 30 seconds

later, cutting off the power.

3

Cautions

STRICT

ENFORCEMENT

Safety Instruction

Installation

WARNING

Please read the following Safety Instructions carefully prior to use.

The instructions are classified into two levels, WARNING and CAUTION according to

the seriousness of possible risks and damages as follows. Compliance to the

instructions are strictly required for safety use.

Please call Sales/Service Shop for the Installation.

Do not attempt to install the air conditioner by yourself because improper works

may cause electric shock, fire, water leakage.

lnstallation in a inadequate place may cause accidents. Do not install in the following place.

Connect the earth

cable.

earthing

Do not install in the

place where there is

any possibility of

inflammable gas

leakage around the

unit.

Do not get the unit

exposed to vapor

or oil steam.

Check proper

installation of the

drainage securely

PROHIBITION PROHIBITION

CAUTION

4

Cautions

WARNING

When abnormality such as burnt-small found,

immediately stop the operation button and

contact sales shop.

OFF

Use an exclusive power source with a

circuit breaker

ENFORCEMENT

Connect power supply cord

to the outlet completely

Use the proper voltage

Do not use power supply cord

in a bundle.

Take care not to damage

the power supply cord.

Do not use power supply cord

extended or connected in halfway

STRICT

ENFORCEMENT

STRICT

ENFORCEMENT

PROHIBITION

Do not start or stop the

operation by disconnecting

the power supply cord and so on.

Do not channel the air flow directly

at people, especially at infants or

the aged.

Do not try to repair or reconstruct

by yourself.

Do not use for the purpose of storage of

food, art work, precise equipment,

breeding, or cultivation.

CAUTION

Take fresh air occasionally especially

when gas appliance is running at the

same time.

PROHIBITION

STRICT

ENFORCEMENT

Do not operate the switch with

wet hand.

PROHIBITION

Do not install the unit near a fireplace

or other heating apparatus.

Check good condition of the

installation stand

Do not pour water onto the unit

for cleaning

PROHIBITION

Do not place animals or plants in

the direct path of the air flow

Do not place any objects on or

climb on the unit.

Do not place flower vase or water

containers on the top of the unit.

Do not insert objects into the air

inlet or outlet.

PROHIBITION

5

Parts and Functions

OUTLET CONNECTING PIPING AND ELECTRICAL WIRING

INLET DRAIN HOSE

Display board

Inlet

Air Purifying Filter

Vertical flap

(adjust up and down air flow.

Don't adjust it manually)

Horizontal louver

Air filter(inside)

Inlet grille

Power plug

(adjust left and right air flow)

(inside)

Outlet

Anion generator

(inside)

For 18k 22k unit, the power supply is on the outdoor unit

1

2

3

4

Indoor unit

Outdoor unit

HSU-07HV03/R2

HSU-09HV03/R2

HSU-12HV03/R2

HSU-18HV03/R2

HSU-22HV03/R2

H2SM-18HV03/R2

H2SM-(9+12)HV03/R2

HSU-12HVA03/R2

6

Parts and Functions

Operation mode

AUTO HEAT FANCOOL DRY

Remote controller

Display board

Used to set healthy operation.

10. HEALTH button

Used for unit start and stop.

11. ON/OFF button

12. TIMER ON display

13. FAN SPEED display

LOW HI

MED AUTO

14. LOCK display

15. SWING UP/DOWN display

16. SLEEP display

17. HEALTH display

Used to select your desired temperature.

19. Operation mode display

21. POWER/SOFT display

22. Left/right air flow display

Remote controller: to display the TEMP. setting.

23. TEMP display

24. TIMER OFF display

25. CLOCK display

26. TEMP button

Used to select fan speed: LOW,MED, HI, AUTO.

27. FAN button

Used to set the health airflow mode.

9. HEALTH AIRFLOW button

28. SWING UP/DOWN button

Used to select up or down air sending direction.

29. SWING LEFT/RIGHT button

Used to select left/right air flow.

30.

FRESH

button

Used to confirm timer and clock settings.

31. SET button

32. POWER/SOFT button

Use to set power/soft function.

Use to set fresh air function.

When the remote controller appears abnormal,

use a sharp pointed article to press this button

to reset the remote controller normal.

33. RESET

Used to set clock and timer setting.

8. HOUR button

Used to select CODE A or B with a press,A or B

will be displayed on LCD.

Please select A without special explanation.

3.CODE

Used to select TIMER ON, TIMER OFF,

TIMER ON-OFF.

4. TIMER button

Used to set correct time.

5. CLOCK button

Used to select sleep mode.

6. SLEEP button

7. MODE button

AUTO COOL DRY FAN HEAT

Used to lock buttons and LCD display. If pressed, the

other buttons will be disabled and the lock condition

display appears. Press it once again, lock will be

canceled and lock condition display disappears.

1. LOCK

19 1631 1712 24

18 30

SWING

CODE

TEMP

LOCK RESETLIGHT

TIMER

SET

CLOCK

FRESHSLEEP

MODE

HEALTH FAN

H.AIR.

28

30

20

21

22

23

24

25

27

26

29

32

31

19

33

18.FRESH AIR display

20.Singal sending display

2.LIGHT button

Control the lightening and extinguishing of

the indoor LED display board.

NOTE:(1) The following functions and related displays are not available:

(2) Cooling only unit do not have functions and displays related with heating.

21

32

3

7

Remove the batteries in case unit won't be in usage for a long period. If there are any display

after taking-out, just need to press reset key.

Parts and Functions

Clock Set

When unit is sta

rted for the first time and after replacing batteries in

remote controller, clock should be adjusted as follows:

Remote cont

roller's operation

3. After time setting is confirmed, press SET, "AM" or "PM" stop flashing,

while clock starts working.

2. Press or to set correct time. Each press will increase or decrease

1 min. If the button is kept depressed, time will change quickly.

1. Press CLOCK button,"AM" or "PM" flashes.

When in us

e, put the signal transmission head directly to the receiver hole on the indoor unit.

The distance between the signal transmission head and the receiver hole should be within

7m without any obstacle as well.

Don't throw or knock the remoter controller.

When electronic-started type fluorescent lamp or change-over type fluorescent lamp or

wireless telephone is installed in the room, the receiver is apt to be disturbed in receiving

the signals, so the distance to the indoor unit should be shorter.

Loading of the batte

ry

Load the batte

ries as illustrated right

2 R-03 (7#) batteries

Rem

ove the battery cover:

Slightly press" "area and push down the cover

as illustrated.

Load the battery:

Be sure that the loading is in line with the "+" / "

-".

request as illustrated on the bottom of the case.

Put on the c

over again.

Confirmation indicator:

After pressing power ON/OFF, if no display, reload the batteries.

Note:

Full displ

ay or unclear display during operation indicates the batteries have been used up.

Please change batteries.

Used two new same-typed batteries when loading.

If the remote controller can't run normally during operation, please remove the batteries and

reload several minutes later.

Hint:

8

Operation

2.Health anion function

Air conditioner starts health anion function operation.

For twice press, disappears,the operation stops.

BRIEF INTRODUCTION TO HEALTH ANION FUCTION

The anion generator in the air conditioner can generate a lot of

anion effectively balance the quantity of position and anion in the

air and also to kill bacteria and speed up the dust sediment in

the room and finally clean the air in the room.

When indoor fan motor is running, it has healthy

process function. (It's available under any mode)

Press HEALTH button. For each press, is displayed.

1.Unit start

Press on/off button (" ") on the remote controller, unit starts.

SWING

CODE

TEMP

LOCK RESETLIGHT

TIMER

SET

CLOCK

FRESHSLEEP

MODE

HEALTH FAN

H.AIR.

HEALTH operation

Remote controller

9

Auto Operation

Operation

2.Select operation mode

Press MODE button. For each press, operation mode

changes as follows:

Remote controller:

Then

Select Auto operation

AUTO COOL DRY FAN HEAT

On the displaying board,colorful displaying bar will be white.

1. Unit start

Press on/off button (" ") on the remote controller, unit starts.

About Auto Operation

Under the mode of auto operation, air conditioner will

automatically select Cool or Heat operation according

to room temperature.

4.Unit stop

Press on/off button (" "), the unit stops.

Press FAN button. For each press, fan speed changes as

follows:

Remote controller:

3.Fan speed selection

Air conditioner is running under displayed fan speed.

When FAN is set to AUTO, the air conditioner

automatically adjusts the fan speed according to room

temperature.

LOW

MED

HI

AUTO

Remote controller

SWING

CODE

TEMP

LOCK RESETLIGHT

TIMER

SET

CLOCK

FRESHSLEEP

MODE

HEALTH FAN

H.AIR.

10

Cool Operation

2.Select operation mode

Press FAN button. For each press, fan speed changes as

follows:

Press MODE button. For each press, operation mode

changes as follows:

Remote controller:

Then Select COOL operation

Press TEMP. button

Every time the button is pressed, temp.setting

increase 1

o

C,if kept depressed, it will increase

rapidly

Every time the button is pressed, temp.setting

decrease 1

o

C,if kept depressed, it will decrease

rapidly

Select a desired temperature.

4.Fan speed selection

3.Select temp.setting

5.Unit stop

Air conditioner is running under displayed fan speed.

When FAN is set to AUTO, the air conditioner

automatically adjusts the fan speed according to room

temperature.

AUTO

LOW

MED

HI

AUTO

COOL DRY FAN HEAT

1. Unit start

Operation

On the displaying board,colorful displaying bar will be blue.

Press on/off button (" ") on the remote controller, unit starts.

Remote controller

Press on/off button (" "), the unit stops.

SWING

CODE

TEMP

LOCK RESETLIGHT

TIMER

SET

CLOCK

FRESHSLEEP

MODE

HEALTH FAN

H.AIR.

11

2.Select operation mode

Press FAN button. For each press, fan speed changes as

follows:

Press MODE button. For each press, operation mode

changes as follows:

Remote controller:

Then Select DRY operation

Press TEMP. button

Every time the button is pressed, temp.setting

increase 1

o

C,if kept depressed, it will increase

rapidly

Every time the button is pressed, temp.setting

decrease 1

o

C,if kept depressed, it will decrease

rapidly

Select a desired temperature.

4.Fan speed selection

3.Select temp.setting

5.Unit stop

AUTO

LOW

MED

HI

AUTO

COOL DRY FAN HEAT

Operation

Dry Operation

1. Unit start

On the displaying board,colorful displaying bar will be

light blue

Air conditioner is running under displayed fan speed.

In DRY mode, when room temperature becomes

lower than temp.setting+2

o

C,unit will run intermittently

at LOW speed regardless of FAN setting.

Press on/off button (" ") on the remote controller, unit starts.

Remote controller

Press on/off button (" "), the unit stops.

SWING

CODE

TEMP

LOCK RESETLIGHT

TIMER

SET

CLOCK

FRESHSLEEP

MODE

HEALTH FAN

H.AIR.

COOL operation starts when room

temp.is higher than temp.setting.

On reaching temp.setting +2

o

C

unit will run in mild DRY mode.

Ultra-low air flow

Temp.setting+2

o

C

Temp.setting

12

Fan Operation

2.Select operation mode

Press FAN button. For each press, fan speed changes as

follows:

Press MODE button. For each press, operation mode

changes as follows:

Remote controller:

Then Select FAN operation

3.Fan speed selection

4.Unit stop

About FAN operation

In FAN operation mode, the unit will not operate in

COOL or HEAT mode but only in FAN mode ,AUTO is

not available in FAN mode.And temp.setting is disabled.

In FAN mode,SLEEP and POWER/SOFT operation is

not available.

AUTO

LOW

MED

HI

COOL DRY FAN HEAT

Operation

1. Unit start

On the displaying board,colorful displaying bar will be pink.

Press on/off button (" ") on the remote controller, unit starts.

Remote controller

Press on/off button(" "), the unit stops.

SWING

CODE

TEMP

LOCK RESETLIGHT

TIMER

SET

CLOCK

FRESHSLEEP

MODE

HEALTH FAN

H.AIR.

13

La pagina sta caricando ...

Haier (9+12)HV03/R2 Istruzioni per l'uso

Haier (9+12)HV03/R2 Istruzioni per l'uso

in altre lingue

Documenti correlati

Altri documenti