Hoshizaki AM-20CAE (CM620) Manuale del proprietario

Tipo
Manuale del proprietario

Questo manuale è adatto anche per

AM-20CAE
L1M060201 (061515)
SELF-CONTAINED CUBER
MACHINE A GLAÇONS A BAC INTÉGRÉ
STECKERFERTIGER WÜRFELEISBEREITER
IJSBLOKJESMACHINE MET INGEBOUWDE OPSLAGBUNKER
FABRICADOR INTEGRADO DE CUBITOS DE HIELO
CUBETTATRICE AUTONOMA
INSTRUCTION MANUAL
(original instructions)
NOTICE D’UTILISATION
(instructions traduites)
BEDIENUNGSANLEITUNG
(Übersetzung)
GEBRUIKSAANWIJZING
(vertaalde instructies)
MANUAL DE INSTRUCCIONES
(instrucciones traducidas)
MANUALE D’ISTRUZIONI
(traduzione)
ENGLISH
FRANCAIS
DEUTSCH
IMPORTANT SAFETY INFORMATION ...................................................................................................1
I. INSTALLATION INSTRUCTIONS ......................................................................................................3
1. CONSTRUCTION .........................................................................................................................3
2. ACCESSORIES ............................................................................................................................3
3. UNPACKING .................................................................................................................................3
4. LOCATION ....................................................................................................................................4
5. INSTALLATION .............................................................................................................................4
6. ELECTRICAL CONNECTIONS ....................................................................................................5
7. WATER SUPPLY AND DRAIN CONNECTIONS ..........................................................................5
II. OPERATING INSTRUCTIONS ...........................................................................................................6
1. START UP ....................................................................................................................................7
2. PREPARING THE ICEMAKER FOR LONG STORAGE ...............................................................7
III. MAINTENANCE ..................................................................................................................................8
1. CLEANING ....................................................................................................................................8
2. BEFORE CALLING FOR SERVICE ............................................................................................10
3. DISPOSAL ..................................................................................................................................11
4. WARRANTY ................................................................................................................................11
SPECIFICATIONS ..................................................................................................................................11
INFORMATIONS DE SECURITE IMPORTANTES ................................................................................13
I. CONSIGNES D’INSTALLATION ......................................................................................................15
1. CONSTRUCTION .......................................................................................................................15
2. ACCESSOIRES ..........................................................................................................................15
3. DEBALLAGE ...............................................................................................................................15
4. EMPLACEMENT .........................................................................................................................16
5. INSTALLATION ...........................................................................................................................17
6. BRANCHEMENTS ELECTRIQUES ............................................................................................17
7. BRANCHEMENTS D’ARRIVEE ET DE VIDANGE D’EAU .........................................................18
II. CONSIGNES D’UTILISATION ..........................................................................................................19
1. MISE EN MARCHE .....................................................................................................................19
2. PREPARATION DU DISTRIBUTEUR DE GLACE EN VUE D’UN ENTREPOSAGE
DE LONGUE DUREE .................................................................................................................20
III. ENTRETIEN .....................................................................................................................................20
1. NETTOYAGE ..............................................................................................................................20
2. AVANT D’APPELER UN REPARATEUR ...................................................................................23
3. MISE AU REBUT ........................................................................................................................23
4. GARANTIE ..................................................................................................................................23
SPECIFICATIONS ..................................................................................................................................24
WICHTIGE SICHERHEITSHINWEISE ...................................................................................................25
I. INSTALLATIONSANLEITUNG .........................................................................................................27
1. KONSTRUKTION ........................................................................................................................27
2. ZUBEHÖR ...................................................................................................................................27
3. AUSPACKEN ..............................................................................................................................27
4. AUFSTELLORT ..........................................................................................................................28
5. INSTALLATION ...........................................................................................................................29
6. ELEKTRISCHE ANSCHLÜSSE ..................................................................................................29
7. WASSERZULAUF- UND WASSERABFLUSSANSCHLÜSSE ...................................................30
II. BEDIENUNGSANLEITUNG .............................................................................................................31
1. INBETRIEBNAHME ....................................................................................................................31
2. MASSNAHMEN FÜR DIE LANGFRISTIGE LAGERUNG DES EISSPENDERS .......................32
III. WARTUNG .......................................................................................................................................32
1. REINIGUNG ................................................................................................................................32
2. VOR ANRUF DES KUNDENDIENSTES ....................................................................................35
3. ENTSORGUNG ..........................................................................................................................35
4. GEWÄHRLEISTUNG ..................................................................................................................35
TECHNISCHE DATEN ...........................................................................................................................36
NEDERLANDS
ESPAÑOL
ITALIANO
BELANGRIJKE VEILIGHEIDSINFORMATIE .........................................................................................37
I. I NSTALLATIE-INSTRUCTIES ...........................................................................................................39
1. CONSTRUCTIE ..........................................................................................................................39
2. TOEBEHOREN ...........................................................................................................................39
3. UITPAKKEN ................................................................................................................................39
4. PLAATSING ................................................................................................................................40
5. INSTALLATIE ..............................................................................................................................41
6. ELEKTRISCHE AANSLUITINGEN .............................................................................................41
7. AANSLUITING VAN WATERTOEVOER- EN WATERAFVOERLEIDINGEN .............................42
II. BEDIENING ......................................................................................................................................43
1. OPSTARTEN ..............................................................................................................................43
2. DE IJSMAKER GEREEDMAKEN VOOR LANGDURIGE OPSLAG ...........................................44
III. ONDERHOUD ..................................................................................................................................44
1. REINIGEN ...................................................................................................................................44
2. VOORDAT U BELT VOOR SERVICE ........................................................................................47
3. VERWIJDERING .........................................................................................................................47
4. GARANTIE ..................................................................................................................................47
SPECIFICATIES.....................................................................................................................................48
INFORMACIÓN IMPORTANTE DE SEGURIDAD .................................................................................49
I. INSTRUCCIONES DE INSTALACIÓN .............................................................................................51
1. ESTRUCTURA ............................................................................................................................51
2. ACCESORIOS ............................................................................................................................51
3. DESEMBALAJE ..........................................................................................................................51
4. UBICACIÓN ................................................................................................................................52
5. INSTALACIÓN ............................................................................................................................53
6. CONEXIONES ELÉCTRICAS .....................................................................................................53
7. SUMINISTRO DE AGUA Y CONEXIONES DE DRENAJE ........................................................54
II. INSTRUCCIONES DE UTILIZACIÓN ...............................................................................................55
1. PUESTA EN MARCHA ...............................................................................................................55
2. PREPARACIÓN DE LA MÁQUINA DE HIELO PARA UN ALMACENAMIENTO
PROLONGADO ..........................................................................................................................55
III. MANTENIMIENTO ............................................................................................................................56
1. LIMPIEZA ....................................................................................................................................56
2. ANTES DE LLAMAR AL SERVICIO TÉCNICO ..........................................................................59
3. ELIMINACIÓN .............................................................................................................................59
4. GARANTÍA ..................................................................................................................................59
ESPECIFICACIONES ............................................................................................................................60
INFORMAZIONI IMPORTANTI SULLA SICUREZZA ............................................................................61
I. ISTRUZIONI PER L’INSTALLAZIONE .............................................................................................63
1. COMPONENTI ............................................................................................................................63
2. ACCESSORI ...............................................................................................................................63
3. DISIMBALLAGGIO ......................................................................................................................63
4. UBICAZIONE ..............................................................................................................................64
5. INSTALLAZIONE ........................................................................................................................65
6. COLLEGAMENTI ELETTRICI .....................................................................................................65
7.
COLLEGAMENTO ALL’APPROVVIGIONAMENTO DELL’ACQUA E COLLEGAMENTO DI
SCARICO ...................................................................................................................................... 66
II. ISTRUZIONI DI FUNZIONAMENTO ................................................................................................67
1. AVVIO .........................................................................................................................................67
2. PREPARATIVI PER LA CONSERVAZIONE A LUNGO TERMINE DELLA MACCHINA ...........68
III. MANUTENZIONE .............................................................................................................................68
1. PULIZIA .......................................................................................................................................68
2. PRIMA DI RIVOLGERSI ALL’ASSISTENZA ...............................................................................71
3. SMALTIMENTO ..........................................................................................................................71
4. GARANZIA ..................................................................................................................................71
SPECIFICHE ..........................................................................................................................................72
1
ENGLISH
IMPORTANT SAFETY INFORMATION
Throughout this manual, notices appear to bring your attention to situations which could result in
death, serious injury, or damage to the unit.
WARNING Indicates a hazardous situation which, if not avoided, could result in death or
serious injury.
CAUTION Indicates a hazardous situation which, if not avoided, could result in minor or
moderate injury.
NOTICE Indicates a hazardous situation which, if not avoided, could result in damage
to the unit.
HYGIENE Indicates important precautions for hygiene and food safety.
IMPORTANT Indicates important information about the use and care of the unit.
IMPORTANT
This booklet is an integral and essential part of the product and should be kept and preserved
by the user.
Please read carefully the guidelines and warnings contained herein as they are intended to
provide the installer/user with essential information for the proper installation and the continued
safe use and maintenance of the product.
Please preserve this booklet for any further consultation that may be necessary.
WARNING
This is a commercial icemaker, and should be destined only to be used for the purpose for
which it has been expressly designed.
Any other use should be considered improper and therefore dangerous. The manufacturer
will not be held liable or responsible for any damage caused by improper, incorrect and
unreasonable use.
The installation, and relocation if necessary, must be carried out by qualied personnel,
in accordance with current regulations, according to the manufacturer’s instructions.
Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of
obstruction.
2
ENGLISH
The use of any electrical appliance involves the observance of some fundamental rules. In
particular:
* Instances of high humidity and moisture increase the risk of electrical short circuits and
potential electrical shocks. If in doubt, disconnect the icemaker.
* Do not damage the power cord or pull it in order to disconnect the icemaker from the
electrical supply.
* If the supply cord is damaged, it must be replaced by a replacement cord which is available
from Hoshizaki Parts/Service Centres.
* Do not touch the electrical parts or operate the switches with damp or wet hands.
* This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, it can however be used
by children aged from 8 years and above and persons with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge providing they have been given
supervision or instruction concerning use of the appliance by a person responsible for their
safety.
* Children shall not be allowed to play with the appliance.
* Cleaning and user maintenance shall not be made by children without supervision.
*Donotattempttomodifytheicemaker.Onlyqualiedpersonnelmaydisassembleorrepair
the appliance.
3
ENGLISH
I. INSTALLATION INSTRUCTIONS
1. CONSTRUCTION
CAUTION
Do not stand or sit on the machine. Severe damage can occur.
IMPORTANT
Do not remove any service panel secured with screws.
2. ACCESSORIES
CD 1
Scoop 1
Inlet Hose 1
Outlet Hose 1
Connector Cover 1
3. UNPACKING
WARNING
Children should not be allowed in reach of the packaging elements (plastic bags and expanded
polystyrene) as they are potential sources of danger.
CAUTION
Do not lift or manoeuvre the carton by using the shipping bands.
When moving the unit by hand, observe local/national regulations and hold the unit from its
base during lifting.
Always wear protective gloves when carrying the unit.
When handling the carton or the unpacked unit, work in pairs to prevent injury.
Outlet Hose
CD Inlet Hose Connector Cover
Scoop
Top Panel
Front Panel
(Lower)
Slope
Power Cord
Air Vent
Handle
Bin Door
Power Switch
Storage Bin
Separator
4
ENGLISH
NOTICE
Remove shipping carton, tape(s) and packing. If packing material is left in the icemaker, it will
not work properly.
1) After removing the packaging, make sure that the icemaker is in good condition. If in doubt, please do not use the icemaker
andcontactaprofessionallyqualiedperson.
2) Remove the shipping tape holding the door and the separators inside the storage bin.
3)Removetheprotectiveplasticlmfromtheexterior.Iftheicemakerisexposedtothesunortoheat,removethelmafterthe
icemaker cools.
4) Remove the package containing the accessories. Check the contents according to “2. ACCESSORIES”.
4. LOCATION
WARNING
This icemaker is not intended for outdoor use.
The icemaker should not be located next to ovens, grills or other high heat producing
equipment.
This appliance is not suitable for installation in an area where a water jet could be used.
CAUTION
Thelocationshouldprovidearmandlevelfoundationfortheicemaker.
NOTICE
Do not place anything on top of the icemaker or in front of the air vent.
IMPORTANT
The recommended operating ambient temperature is within 10°C to 35°C. But this icemaker is
capable of operating at 38°C. Water connection is cold water only. Operation of the icemaker,
for extended periods, outside of these normal temperature ranges may affect production
capacity.
This ice maker may be built into a work station or cabinet. There is no minimum clearance
requirement for the top or left and right of the machine.
Side View
Rear
Front
Top
ICEMAKER 15cm
Top View Rear
Front
Left Right
15cm
ICEMAKER
In some high humidity environments, condensation may form inside the machine and drip onto
theoor.Donotinstallwheretheoorcanbeaffectedbywater.
5. INSTALLATION
CAUTION
Incorrect installation can cause harm to people, animals or other items, for which the
manufacturer cannot be held responsible.
* Place the icemaker in the selected permanent location.
5
ENGLISH
6. ELECTRICAL CONNECTIONS
WARNING
THIS APPLIANCE MUST BE EARTHED
This icemaker requires an earth that meets the national and local electrical code requirements.
To prevent possible severe electrical shock to individuals or extensive damage to the unit, install
a proper earth wire to the icemaker.
Disconnect the main power supply before any maintenance, repairs or cleaning is undertaken.
* This appliance requires a separate 220 - 240VAC, 10A supply. The electrical supply must be protected by a suitable circuit
breaker.
*Themaincontrolboxfuseisratedat5Aandshouldonlybereplacedbyaqualiedserviceengineer.
* Usually an electrical permit and services of a licensed electrician are required.
For the U.K. and the Republic of Ireland only
WARNING: Only qualied personnel may disassemble or modify the appliance.
* The wires in the mains lead are coloured in accordance with the following code:
Green & Yellow = Earth
Blue = Neutral
Brown = Live
As the colours of the wire in the mains lead of this appliance may not correspond with the coloured markings identifying the
terminals in the plug, proceed as follows:
The wire which is coloured Green-and-Yellow must be connected to the terminal in the plug which is marked with the letter
E or by the symbol or coloured Green or Green-and-Yellow. The wire which is coloured Blue must be connected to the
terminal which is marked with the letter N or coloured Black. The wire which is coloured Brown must be connected to the
terminal which is marked with the letter L or coloured Red.
* Should the socket outlets in the installation site not be suitable for the plug supplied with the product, the plug must be
removed(cutoffifitismouldedonplug)andanappropriateplugtted.
If the non-rewirable plug has been cut from the power supply cord, it must be disposed of. There should be no attempt to
reuse it. Inserting such a plug into a socket elsewhere presents a serious risk of electrical shock.
*Thenon-rewirableplugmustneverbeusedwithoutafusecoverbeingtted.
 Thecorrectreplacementforthedetachablefusecoverisidentiablefromthemanufacturer’sreferencenumberstampedon
the plug.
Supply of replacement fuse covers can be obtained from Hoshizaki Parts/Service Centres.
Fuses should be rated at 13A and approved to BS 1362.
7. WATER SUPPLY AND DRAIN CONNECTIONS
WARNING
Connect to potable cold water supply only.
* The connections to the mains water supply must be made in accordance with the countries’ current requirements of the Water
Supply or Water Fittings Regulations.
*Icemaking water must be potable water. Where scaling can be caused by water quality, installation of an external lter or
softener is recommended. Contact your local water treatment professional or Hoshizaki service agent.
* Water supply pressure should be minimum 0.07 MPa (0.7 bar) and maximum 0.78 MPa (8 bar). If the pressure exceeds 0.78
MPa (8 bar), use a proper pressure reducing valve. Do NOT throttle back the supply tap.
6
ENGLISH
* A plumbing permit and services of a licensed plumber may be required in some areas.
* The icemaker drain is gravity fed, so ensure the drain hose has an adequate pitch or fall.
* Drain lines should not be installed directly to the sewer system.
* Topreventabackowintothestoragebin,theoutlethosemustbelaidasshown.
* Be sure to use the new hose-sets supplied with the appliance. Do not reuse any old hose-sets.
1)Attachtheangledendofexibleinlethose(accessory)totheG3/4ttingontherearoftheicemakerasindicated,ensuring
rubbersealingwasheriscorrectlypositioned.Handtightensufcientlytoprovideleakfreejoint.
2) Attach the other end of inlet hose to the water tap, noting that the washer is correctly positioned before hand tightening as
described above. It is a wise precaution to have a stop valve within easy reach.
3) Hand tighten grey exible outlet hose (accessory) onto the R3/4 tting on the rear of the icemaker as indicated, ensuring
rubber washer is correctly positioned to obtain a leak free joint. The hose can be cut to length as necessary to suit the position
of the main drain.
II. OPERATING INSTRUCTIONS
CAUTION
Do not put your hands into the back of the storage
bin or the ice chute on top of the storage bin.
Ice may drop off the icemaker, a hard block of
ice may suddenly break down, or the icemaking
mechanism may suddenly move, resulting in injury.
To prevent damage to the bin door, do not lean on or put anything on the door when it is open.
Water Supply Tap
Inlet Hose
Potable Water
Inlet G3/4
Inlet Hose
Drain Outlet R3/4
Outlet Hose
Storage Bin
Ice Chute
Downgrade
GOOD BAD
Upgrade
BAD
7
ENGLISH
NOTICE
All parts are factory-adjusted. Improper adjustments may result in failure.
If the unit is turned off, wait for at least 3 minutes before restarting the icemaker to prevent
damage to the compressor.
HYGIENE
This icemaker is designed to produce edible ice. To keep the icemaker hygienic:
* Wash your hands before removing ice. Use the plastic scoop provided (accessory).
* The storage bin is for ice use only. Do not store anything else in the bin nor use other
electrical appliances in the bin.
* Clean the storage bin before use (see “III. 1. CLEANING”).
* Keep the scoop clean. Clean it by using a neutral cleaner and rinse thoroughly.
* Close the door after removing ice to prevent entrance of dirt, dust or insects into the storage
bin.
1. START UP
1) Plug in the icemaker.
2) Open the water supply tap.
3) Prime the water pump by adding 1 litre of water to the water tank.
4) Move the power switch to the “ON” position.
IMPORTANT
Ensure the tank is primed before ice production commences to assure good quality ice from the
rstcycle.
2. PREPARING THE ICEMAKER FOR LONG STORAGE
NOTICE
This icemaker will not work at subfreezing temperatures. To prevent damage to the water
supply line, drain the icemaker when air temperature is below zero.
HYGIENE
When shutting down the icemaker for two or more days, drain the icemaker to prevent
contamination in the water circuit.
1) Unplug the icemaker.
2) Close the water supply tap, and remove the inlet hose.
3) Remove all ice from the storage bin, and clean the bin.
4)Askaprofessionallyqualiedpersontodraintheicemaker.
8
ENGLISH
III. MAINTENANCE
1. CLEANING
WARNING
Before carrying out any cleaning or maintenance operations, unplug the icemaker from the
electrical supply network.
This appliance must not be cleaned by use of a water jet.
CAUTION
When using a neutral cleaner or sodium hypochlorite, thoroughly read and understand the
instructions provided to prevent potential health problems.
NOTICE
It is recommended to ask a trained service person to clean and sanitise the icemaker water system.
Ask a trained service person to check and clean the condenser at least twice a year.
In areas where the water supply has a high mineral content, the spray jets may need frequent
cleaning.Increasingtheharvesttimewillushmorewaterandhelptoreducethefrequencyof
cleaning.
To prevent possible damage, do not clean the plastic parts with water above 40°C or in a
dishwasher.
Note: The wash switch on the front of the control box is intended for use by service
personnel only. During normal icemaking operation, keep the wash switch in the
“ICE” position.
[a] Machine and Bin Exterior
Wipe the exterior at least once per week with a clean, soft cloth. Use a damp cloth
containing a neutral cleaner to wipe off grease or dirt.
[b] Scoop and Storage Bin Handle Cleaning/Sanitisation (Daily)
1) Either mix 1 litre of water with 4 ml of 5.25% sodium hypochlorite solution in a suitable container, or the recommended
Hoshizaki sanitiser as directed.
2) Soak the scoop in the solution for more than 3 minutes. Rinse thoroughly, and shake to remove surplus liquid.
Note: Using a cloth to dry may re-contaminate.
3) Use a neutral cleaner to wash the storage bin handle. Rinse thoroughly.
4) Soak a clean cloth with the sanitising solution, and wipe the handle. Use fresh water and a clean cloth to rinse/dry.
[c] Storage Bin Interior Cleaning/Sanitisation (Weekly)
1) Open the storage bin door, and remove all ice.
2) Wash the bin liner with a neutral non-abrasive cleaner. Rinse thoroughly.
3) Soak a clean cloth with the neutral cleaner, and wipe both sides of the slope and the door inner surface. Wipe off the cleaner
with a clean damp cloth.
4) Either mix 5 litres of water with 18 ml of 5.25% sodium hypochlorite solution in a suitable container, or the recommended
Hoshizaki sanitiser as directed.
5) Soak a clean sponge or cloth with the solution, and wipe the bin liner, bin door and slope.
Wash Switch
9
ENGLISH
6) The remaining solution can be used to sanitise utensils.
Note: Do not wipe dry or rinse after sanitising, but allow to air dry.
[d] Water Tank, Spray Assembly, Separator and Ice Chute Cleaning/Sanitisation (Monthly)
1) Move the power switch to the “OFF” position.
2) Unplug the icemaker.
3) Open the storage bin door, and remove all ice.
4) Remove each separator by lifting it to the horizontal position and pushing it hard
inward. Remove all the separators in the same way, and clean and sanitise them.
5) Disconnect the water pipe by the drain to remove water in the tank.
6) Spread out the tabs on both sides to unlock the water tank, and pull it out toward you.
Clean and sanitise the water tank.
7) Lift off the ice chute from the front frame pipe and then from the rear frame pipe.
Clean and sanitise the ice chute.
8) Pull the discharge tube from the spray assembly. Remove the assembly by
pulling it toward you.
9) Remove the two caps to clean and sanitise the spray assembly. If the nozzles are clogged, clean
them with a wire or a suitable brush.
Frame Pipe
Ice Chute
Pull out
Unlock Unlock
Separator
Water Pipe
Water Tank
Cap
Discharge Tube
Spray Assembly
10
ENGLISH
10)Retthetwocapsonthecleaningoutletstosealthemoff.
11) Slide the spray assembly along the rails on the right and left brackets. Ret the
dischargetubesecurelyonthesprayoutlet.Aloosettingmaycauseawaterleak.
12) Position and lock the ice chute on to the front and rear frame pipes by pushing the chute down
until it clicks on to both pipes.
13) Slide in the water tank along the rails at the bottom of the right and left brackets until
it clicks into place.
14)Retthewaterpipesecurelyinthearrowdirection.Aloosettingmaycauseawaterleak.
15) Hook each separator on to the rail, and pull it hard toward you until it locks in place with a click.
Retalltheseparatorsinthesameway.
16) Check for water leaks and proper ice production.
17) Follow the steps in “II. 1. START UP”.
2. BEFORE CALLING FOR SERVICE
WARNING
Do not damage the refrigerant circuit.
If the icemaker does not work properly or does not work at all, then before calling for service, check that:
* The power is supplied to the unit.
* The water is turned on.
For further assistance or advice, contact your local Hoshizaki service agent.
Frame Pipe Bracket
Rail Rail
Bracket
Lock Lock
11
ENGLISH
3. DISPOSAL
Comply with local regulations regarding disposal of this appliance and its refrigerant gas. Before you scrap the appliance, take
off the door to prevent children becoming trapped.
Correct disposal of this product:
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To
prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly
to promote the sustainable reuse of material resources. To return your used device, use the return and collection
systems or contact the retailer where the product was purchased. They can take this product for environmental safe
recycling.
4. WARRANTY
Hoshizaki warrants to the original owner/user that all Hoshizaki branded products shall be free of defects in material and/or
workmanship for the duration of the “warranty period”. The warranty shall be effective for two years from the date of installation.
Hoshizaki’s liability under the terms of the warranty are limited and shall exclude routine servicing, cleaning, essential
maintenance and/or repairs occasioned by misuse and installations not in accordance with Hoshizaki guidelines.
Warranty repairs should be completed by an approved Hoshizaki dealer or service agency using genuine Hoshizaki components.
To obtain full details of your warranty and approved service agency, please contact your dealer/supplier, or the nearest Hoshizaki
Serviceofce:
Hoshizaki UK - UK, Ireland
TEL: +44 845 456 0585
FAX: +44 132 283 8331
Hoshizaki Nederland & België - Netherlands, Belgium,
Luxembourg
TEL: +31 20 5650420 (Nederland)
TEL: +32 2 712 30 30 (België)
FAX: +31 20 6918768
[email protected] (Nederland)
Hoshizaki Deutschland - Germany, Switzerland, Austria
TEL: +49 2154 92810
FAX: +49 2154 928128
Hoshizaki France - France
TEL: +33 1 48 63 93 80
FAX: +33 1 48 63 93 88
Hoshizaki Europe B.V. - all other countries within Europe
and Africa
TEL: +31 20 6918499
FAX: +31 20 6918768
Hoshizaki Iberia - Spain, Portugal
TEL: +34 93 478 09 52
FAX: +34 93 478 08 00
SPECIFICATIONS
Model AM-20CAE
Type Air-cooled, column ice
Power Supply 1 phase 220 - 240V 50Hz
Electric Consumption 238W
Ice Production per 24h 28kg (ambient 10°C, water 10°C)
Dimensions 350mm(W) x 444mm(D) x 590mm(H)
Refrigerant R134a, 130g
Weight Net: 28kg (Gross: 33.5kg)
Ambient Temp 10 - 35°C (Capable of operating at 38°C)
Water Supply Temp 5 - 35°C
Water Supply Pressure 0.07 - 0.78 MPa (0.7 - 8 bar)
Voltage Range Rated voltage ± 6%
12
ENGLISH
This product includes a hermetically sealed refrigeration system that contains uorinated greenhouse gases covered
by the Kyoto Protocol:
AM-20CAE R134a / GWP 1430 / 0.13kg
This product meets the essential health and safety requirements demanded by the following regulations:
EMC Directive (2004/108/EC)
Low Voltage Directive (2006/95/EC)
RoHS Directive (2011/65/EU)
Food Contact Materials Regulation (EC 1935/2004)
Manufacturer: Hoshizaki Europe Ltd.
Telford 70 Stafford Park 7, Telford, Shropshire TF3 3BQ England
13
FRANCAIS
INFORMATIONS DE SECURITE IMPORTANTES
Tout au long de ce manuel, des avis attirent votre attention sur des situations qui pourraient
entraîner la mort, des blessures graves ou des dégâts à l’appareil.
AVERTISSEMENT Signale une situation dangereuse qui, si elle n’est pas évitée, peut
entraîner des blessures graves voire mortelles.
ATTENTION Signale une situation dangereuse qui, si elle n’est pas évitée, peut
entraîner des blessures mineures ou modérées.
AVIS Signale une situation dangereuse qui, si elle n’est pas évitée, peut
entraîner des dégâts à l’appareil.
HYGIENE Signale des précautions importantes à prendre en matière d’hygiène
et de sécurité alimentaire.
IMPORTANT Signale des informations importantes sur l’utilisation de l’appareil et
son entretien.
IMPORTANT
Ce livret est un élément essentiel qui fait partie intégrante du produit et il doit être conservé
soigneusement par l’utilisateur.
Veuillez lire attentivement les conseils et les avertissements qui s’y trouvent, car ils ont pour
but de fournir à l’installateur et à l’utilisateur des informations essentielles pour une installation
correcte, une utilisation en toute sécurité et un entretien adéquat du produit.
Veuillez conserver précieusement ce livret pour toute référence ultérieure.
AVERTISSEMENT
Cette machine à glace a été conçue pour des applications commerciales ; elle ne peut être
utilisée qu’aux ns auxquelles elle est expressément destinée.
Toute autre utilisation doit être considérée comme inappropriée et donc dangereuse.
Le fabricant décline toute responsabilité pour les dégâts provoqués par une utilisation
inappropriée, incorrecte et abusive.
L’installation, et le transfert le cas échéant, doivent être effectués par un personnel
qualié, conformément aux réglementations en vigueur et aux consignes du fabricant.
Veillez à ce que les ouvertures de ventilation de l’enceinte de l’appareil et de la structure
intégrée ne soient pas obstruées.
14
FRANCAIS
L’utilisation de tout appareil électrique implique le respect de certaines règles fondamentales.
En particulier :
* La présence d’une humidité élevée augmente le risque de courts-circuits électriques et de
décharges électriques. En cas de doute, débrancher la machine à glace.
* Ne pas endommager le cordon d’alimentation et ne pas tirer dessus pour débrancher la
machine à glace.
* Si le cordon d’alimentation est endommagé, il doit être remplacé par un cordon de rechange
disponible auprès des centres de pièces détachées et d’entretien Hoshizaki.
* Ne pas toucher les pièces électriques ni les commutateurs avec les mains humides ou
mouillées.
* Cette machine n’est pas prévue pour une utilisation par des personnes (y compris des
enfants) aux capacités physiques, sensorielles ou mentales réduites, ou manquant
d’expérience ou de connaissances. Elle peut cependant être utilisée par des enfants d’au
moins 8 ans et des personnes aux capacités physiques, sensorielles ou mentales réduites,
ou manquant d’expérience ou de connaissances, si une personne responsable de leur
sécurité les surveille ou leur a indiqué les consignes d’utilisation de la machine.
* Les enfants ne doivent pas être autorisés à jouer avec la machine.
* Le nettoyage et l’entretien régulier ne doivent pas être effectués par des enfants sans
surveillance.
* Ne pas tenter de modier la machine à glace. Cet appareil ne peut être démonté ou réparé
que par du personnel qualié.
15
FRANCAIS
I. CONSIGNES D’INSTALLATION
1. CONSTRUCTION
ATTENTION
Ne pas se mettre debout ni s’asseoir sur la machine. Cela entraînerait un risque de dommages
important.
IMPORTANT
Ne retirer aucun panneau de service xé avec des vis.
2. ACCESSOIRES
CD 1
Pelle à glaçons 1
Flexible d’arrivée 1
Tuyau de sortie 1
Capot de connecteur 1
3. DEBALLAGE
AVERTISSEMENT
Les enfants doivent être tenus à l’écart des éléments d’emballage (sacs en plastique et
polystyrène expansé) car ils constituent des sources de danger potentielles.
ATTENTION
Ne pas soulever ou déplacer le carton en utilisant les sangles d’emballage.
Lors du déplacement manuel de l’appareil, respecter les réglementations locales/nationales et
retirer l’appareil de sa base lorsqu’il est soulevé.
Toujours porter des gants de protection lors du transport de l’appareil.
Panneau supérieur
Panneau avant
(inférieur)
Pente
Cordon d’alimentation
Ouverture d’aération
Poignée
Porte de bac
Commutateur de marche/arrêt
Bac de stockage
Séparateur
Tuyau de sortie
CD Flexible d’arrivée Capot de connecteur
Pelle à glaçons
16
FRANCAIS
Lors de la manipulation du carton ou de l’appareil déballé, travailler à deux pour éviter les
blessures.
AVIS
Enlever le carton de transport, le ruban adhésif et le matériel d’emballage. S’il reste des
matériaux d’emballage dans la machine à glace, elle ne fonctionnera pas correctement.
1) Après avoir enlevé le matériel d’emballage, vérier que la machine à glace est en bon état. En cas de doute, ne pas utiliser la
machine à glace et faire appel à un technicien qualié.
2) Enlever le ruban adhésif retenant la porte et les séparateurs à l’intérieur du bac de stockage.
3) Retirer le lm protecteur en plastique recouvrant l’extérieur de la machine. Si la machine à glace a été exposée au soleil ou à
la chaleur, la laisser refroidir avant d’enlever le lm.
4) Retirer le paquet contenant les accessoires. Vérier le contenu conformément à « 2. ACCESSOIRES ».
4. EMPLACEMENT
AVERTISSEMENT
Cette machine à glace n’est pas conçue pour être utilisée à l’extérieur.
La machine à glace ne doit pas être placée à proximité de fours, de grills ou de toute autre
source de chaleur importante.
Cet appareil n’est pas conçu pour être installé dans une zone où un jet d’eau peut être utilisé.
ATTENTION
La machine à glace doit avoir une assise solide et horizontale.
AVIS
Ne rien poser sur le dessus de la machine à glace ni devant l’ouverture d’aération.
IMPORTANT
La température ambiante de service recommandée est comprise entre 10 °C et 35 °C. Cette
machine à glace peut cependant fonctionner à 38 °C. Seul un raccordement à l’eau froide est
possible. Le fonctionnement de la machine en dehors de ces plages de températures, pendant
des durées prolongées, risque d’affecter la capacité de production de glaçons.
Cette machine à glace peut être intégrée à un poste de travail ou un coffret. Aucun espace
minimal n’est requis en haut, à gauche et à droite de la machine.
Vue latérale
Arrière
Avant
Haut
MACHINE
A GLACE 15cm
Vue de dessus Arrière
Avant
Gauche Droite
15cm
MACHINE A GLACE
Dans certains environnements très humides, de la condensation peut se former à l’intérieur
de la machine et couler sur le sol. Ne pas installer l’appareil sur un sol que l’eau pourrait
endommager.
17
FRANCAIS
5. INSTALLATION
ATTENTION
Une installation incorrecte de la machine peut avoir des conséquences néfastes sur les
personnes, les animaux ou d’autres choses, pour lesquelles le fabricant ne peut être tenu
responsable.
* Placer la machine à glace à l’emplacement choisi pour son installation.
6. BRANCHEMENTS ELECTRIQUES
AVERTISSEMENT
CET APPAREIL DOIT ETRE MIS A LA TERRE
Cette machine à glace doit avoir une mise à la terre qui respecte les réglementations
électriques nationales et locales.
Pour éviter tout risque de décharges électriques graves ou de dégâts importants à l’appareil,
installer un câble de mise à la terre approprié sur la machine.
Avant toute opération de maintenance, réparation ou nettoyage, débrancher l’alimentation
électrique.
* Cet appareil nécessite une alimentation 220 - 240 V CA 10A séparée. L’alimentation électrique doit être protégée par un
disjoncteur approprié.
* Le fusible du boîtier de commande principal est étalonné à 5 A et ne doit être remplacé que par un technicien d’entretien
qualié.
* Il faut généralement obtenir une autorisation pour effectuer l’installation électrique et recourir aux services d’un électricien
qualié.
Pour le Royaume-Uni et la République d’Irlande uniquement
AVERTISSEMENT : Cet appareil ne peut être démonté ou modié que par du personnel qualié.
* Les ls du cordon d’alimentation électrique présentent le codage couleur suivant :
Vert et jaune = Terre
Bleu = Neutre
Marron = Sous tension
La couleur des conducteurs du cordon d’alimentation de cet appareil peut ne pas correspondre au marquage couleur des
bornes de la che ; dans ce cas, procéder comme suit :
Le l vert et jaune doit être relié à la borne de la che repérée par la lettre E ou par le symbole ou la couleur verte ou
verte et jaune. Le conducteur bleu doit être raccordé à la borne portant la lettre N ou de couleur noire. Le conducteur marron
doit être raccordé à la borne portant la lettre L ou de couleur rouge.
* Si la che livrée avec la machine ne convient pas aux prises du local d’installation, l’enlever (la couper s’il s’agit d’une che
moulée) et en monter une autre.
Une che non recâblable enlevée doit être jetée. Elle ne peut en aucun cas être réutilisée. L’insertion de ce type de che
dans une autre prise présente des risques graves de décharges électriques.
* La che non recâblable ne doit jamais être utilisée sans un protège-fusible.
Le numéro de référence du protège-fusible amovible est imprimé sur la che. Utiliser cette référence pour toute commande
de pièce.
Il est possible de se procurer des protège-fusibles de remplacement auprès des centres de pièces détachées et d’entretien
Hoshizaki.
La capacité nominale des fusibles doit être de 13A ; ils doivent être agréés selon la norme BS 1362.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75

Hoshizaki AM-20CAE (CM620) Manuale del proprietario

Tipo
Manuale del proprietario
Questo manuale è adatto anche per