Hoshizaki AM-20CAE Manuale del proprietario

AM-20CAE

L1M060201 (061515)

SELF-CONTAINED CUBER

MACHINE A GLAÇONS A BAC INTÉGRÉ

STECKERFERTIGER WÜRFELEISBEREITER

IJSBLOKJESMACHINE MET INGEBOUWDE OPSLAGBUNKER

FABRICADOR INTEGRADO DE CUBITOS DE HIELO

CUBETTATRICE AUTONOMA

INSTRUCTION MANUAL

(original instructions)

NOTICE D’UTILISATION

(instructions traduites)

BEDIENUNGSANLEITUNG

(Übersetzung)

GEBRUIKSAANWIJZING

(vertaalde instructies)

MANUAL DE INSTRUCCIONES

(instrucciones traducidas)

MANUALE D’ISTRUZIONI

(traduzione)

ENGLISH

FRANCAIS

DEUTSCH

IMPORTANT SAFETY INFORMATION ...................................................................................................1

I. INSTALLATION INSTRUCTIONS ......................................................................................................3

1. CONSTRUCTION .........................................................................................................................3

2. ACCESSORIES ............................................................................................................................3

3. UNPACKING .................................................................................................................................3

4. LOCATION ....................................................................................................................................4

5. INSTALLATION .............................................................................................................................4

6. ELECTRICAL CONNECTIONS ....................................................................................................5

7. WATER SUPPLY AND DRAIN CONNECTIONS ..........................................................................5

II. OPERATING INSTRUCTIONS ...........................................................................................................6

1. START UP ....................................................................................................................................7

2. PREPARING THE ICEMAKER FOR LONG STORAGE ...............................................................7

III. MAINTENANCE ..................................................................................................................................8

1. CLEANING ....................................................................................................................................8

2. BEFORE CALLING FOR SERVICE ............................................................................................10

3. DISPOSAL ..................................................................................................................................11

4. WARRANTY ................................................................................................................................11

SPECIFICATIONS ..................................................................................................................................11

INFORMATIONS DE SECURITE IMPORTANTES ................................................................................13

I. CONSIGNES D’INSTALLATION ......................................................................................................15

1. CONSTRUCTION .......................................................................................................................15

2. ACCESSOIRES ..........................................................................................................................15

3. DEBALLAGE ...............................................................................................................................15

4. EMPLACEMENT .........................................................................................................................16

5. INSTALLATION ...........................................................................................................................17

6. BRANCHEMENTS ELECTRIQUES ............................................................................................17

7. BRANCHEMENTS D’ARRIVEE ET DE VIDANGE D’EAU .........................................................18

II. CONSIGNES D’UTILISATION ..........................................................................................................19

1. MISE EN MARCHE .....................................................................................................................19

2. PREPARATION DU DISTRIBUTEUR DE GLACE EN VUE D’UN ENTREPOSAGE

DE LONGUE DUREE .................................................................................................................20

III. ENTRETIEN .....................................................................................................................................20

1. NETTOYAGE ..............................................................................................................................20

2. AVANT D’APPELER UN REPARATEUR ...................................................................................23

3. MISE AU REBUT ........................................................................................................................23

4. GARANTIE ..................................................................................................................................23

SPECIFICATIONS ..................................................................................................................................24

WICHTIGE SICHERHEITSHINWEISE ...................................................................................................25

I. INSTALLATIONSANLEITUNG .........................................................................................................27

1. KONSTRUKTION ........................................................................................................................27

2. ZUBEHÖR ...................................................................................................................................27

3. AUSPACKEN ..............................................................................................................................27

4. AUFSTELLORT ..........................................................................................................................28

5. INSTALLATION ...........................................................................................................................29

6. ELEKTRISCHE ANSCHLÜSSE ..................................................................................................29

7. WASSERZULAUF- UND WASSERABFLUSSANSCHLÜSSE ...................................................30

II. BEDIENUNGSANLEITUNG .............................................................................................................31

1. INBETRIEBNAHME ....................................................................................................................31

2. MASSNAHMEN FÜR DIE LANGFRISTIGE LAGERUNG DES EISSPENDERS .......................32

III. WARTUNG .......................................................................................................................................32

1. REINIGUNG ................................................................................................................................32

2. VOR ANRUF DES KUNDENDIENSTES ....................................................................................35

3. ENTSORGUNG ..........................................................................................................................35

4. GEWÄHRLEISTUNG ..................................................................................................................35

TECHNISCHE DATEN ...........................................................................................................................36

NEDERLANDS

ESPAÑOL

ITALIANO

BELANGRIJKE VEILIGHEIDSINFORMATIE .........................................................................................37

I. I NSTALLATIE-INSTRUCTIES ...........................................................................................................39

1. CONSTRUCTIE ..........................................................................................................................39

2. TOEBEHOREN ...........................................................................................................................39

3. UITPAKKEN ................................................................................................................................39

4. PLAATSING ................................................................................................................................40

5. INSTALLATIE ..............................................................................................................................41

6. ELEKTRISCHE AANSLUITINGEN .............................................................................................41

7. AANSLUITING VAN WATERTOEVOER- EN WATERAFVOERLEIDINGEN .............................42

II. BEDIENING ......................................................................................................................................43

1. OPSTARTEN ..............................................................................................................................43

2. DE IJSMAKER GEREEDMAKEN VOOR LANGDURIGE OPSLAG ...........................................44

III. ONDERHOUD ..................................................................................................................................44

1. REINIGEN ...................................................................................................................................44

2. VOORDAT U BELT VOOR SERVICE ........................................................................................47

3. VERWIJDERING .........................................................................................................................47

4. GARANTIE ..................................................................................................................................47

SPECIFICATIES.....................................................................................................................................48

INFORMACIÓN IMPORTANTE DE SEGURIDAD .................................................................................49

I. INSTRUCCIONES DE INSTALACIÓN .............................................................................................51

1. ESTRUCTURA ............................................................................................................................51

2. ACCESORIOS ............................................................................................................................51

3. DESEMBALAJE ..........................................................................................................................51

4. UBICACIÓN ................................................................................................................................52

5. INSTALACIÓN ............................................................................................................................53

6. CONEXIONES ELÉCTRICAS .....................................................................................................53

7. SUMINISTRO DE AGUA Y CONEXIONES DE DRENAJE ........................................................54

II. INSTRUCCIONES DE UTILIZACIÓN ...............................................................................................55

1. PUESTA EN MARCHA ...............................................................................................................55

2. PREPARACIÓN DE LA MÁQUINA DE HIELO PARA UN ALMACENAMIENTO

PROLONGADO ..........................................................................................................................55

III. MANTENIMIENTO ............................................................................................................................56

1. LIMPIEZA ....................................................................................................................................56

2. ANTES DE LLAMAR AL SERVICIO TÉCNICO ..........................................................................59

3. ELIMINACIÓN .............................................................................................................................59

4. GARANTÍA ..................................................................................................................................59

ESPECIFICACIONES ............................................................................................................................60

INFORMAZIONI IMPORTANTI SULLA SICUREZZA ............................................................................61

I. ISTRUZIONI PER L’INSTALLAZIONE .............................................................................................63

1. COMPONENTI ............................................................................................................................63

2. ACCESSORI ...............................................................................................................................63

3. DISIMBALLAGGIO ......................................................................................................................63

4. UBICAZIONE ..............................................................................................................................64

5. INSTALLAZIONE ........................................................................................................................65

6. COLLEGAMENTI ELETTRICI .....................................................................................................65

7.

COLLEGAMENTO ALL’APPROVVIGIONAMENTO DELL’ACQUA E COLLEGAMENTO DI

SCARICO ...................................................................................................................................... 66

II. ISTRUZIONI DI FUNZIONAMENTO ................................................................................................67

1. AVVIO .........................................................................................................................................67

2. PREPARATIVI PER LA CONSERVAZIONE A LUNGO TERMINE DELLA MACCHINA ...........68

III. MANUTENZIONE .............................................................................................................................68

1. PULIZIA .......................................................................................................................................68

2. PRIMA DI RIVOLGERSI ALL’ASSISTENZA ...............................................................................71

3. SMALTIMENTO ..........................................................................................................................71

4. GARANZIA ..................................................................................................................................71

SPECIFICHE ..........................................................................................................................................72

1

ENGLISH

IMPORTANT SAFETY INFORMATION

Throughout this manual, notices appear to bring your attention to situations which could result in

death, serious injury, or damage to the unit.

WARNING Indicates a hazardous situation which, if not avoided, could result in death or

serious injury.

CAUTION Indicates a hazardous situation which, if not avoided, could result in minor or

moderate injury.

NOTICE Indicates a hazardous situation which, if not avoided, could result in damage

to the unit.

HYGIENE Indicates important precautions for hygiene and food safety.

IMPORTANT Indicates important information about the use and care of the unit.

IMPORTANT

This booklet is an integral and essential part of the product and should be kept and preserved

by the user.

Please read carefully the guidelines and warnings contained herein as they are intended to

provide the installer/user with essential information for the proper installation and the continued

safe use and maintenance of the product.

Please preserve this booklet for any further consultation that may be necessary.

WARNING

This is a commercial icemaker, and should be destined only to be used for the purpose for

which it has been expressly designed.

Any other use should be considered improper and therefore dangerous. The manufacturer

will not be held liable or responsible for any damage caused by improper, incorrect and

unreasonable use.

The installation, and relocation if necessary, must be carried out by qualied personnel,

in accordance with current regulations, according to the manufacturer’s instructions.

Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of

obstruction.

2

ENGLISH

The use of any electrical appliance involves the observance of some fundamental rules. In

particular:

* Instances of high humidity and moisture increase the risk of electrical short circuits and

potential electrical shocks. If in doubt, disconnect the icemaker.

* Do not damage the power cord or pull it in order to disconnect the icemaker from the

electrical supply.

* If the supply cord is damaged, it must be replaced by a replacement cord which is available

from Hoshizaki Parts/Service Centres.

* Do not touch the electrical parts or operate the switches with damp or wet hands.

* This appliance is not intended for use by persons (including children) with reduced physical,

sensory or mental capabilities, or lack of experience and knowledge, it can however be used

by children aged from 8 years and above and persons with reduced physical, sensory or

mental capabilities, or lack of experience and knowledge providing they have been given

supervision or instruction concerning use of the appliance by a person responsible for their

safety.

* Children shall not be allowed to play with the appliance.

* Cleaning and user maintenance shall not be made by children without supervision.

*Donotattempttomodifytheicemaker.Onlyqualiedpersonnelmaydisassembleorrepair

the appliance.

3

ENGLISH

I. INSTALLATION INSTRUCTIONS

1. CONSTRUCTION

CAUTION

Do not stand or sit on the machine. Severe damage can occur.

IMPORTANT

Do not remove any service panel secured with screws.

2. ACCESSORIES

CD 1

Scoop 1

Inlet Hose 1

Outlet Hose 1

Connector Cover 1

3. UNPACKING

WARNING

Children should not be allowed in reach of the packaging elements (plastic bags and expanded

polystyrene) as they are potential sources of danger.

CAUTION

Do not lift or manoeuvre the carton by using the shipping bands.

When moving the unit by hand, observe local/national regulations and hold the unit from its

base during lifting.

Always wear protective gloves when carrying the unit.

When handling the carton or the unpacked unit, work in pairs to prevent injury.

Outlet Hose

CD Inlet Hose Connector Cover

Scoop

Top Panel

Front Panel

(Lower)

Slope

Power Cord

Air Vent

Handle

Bin Door

Power Switch

Storage Bin

Separator

4

ENGLISH

NOTICE

Remove shipping carton, tape(s) and packing. If packing material is left in the icemaker, it will

not work properly.

1) After removing the packaging, make sure that the icemaker is in good condition. If in doubt, please do not use the icemaker

andcontactaprofessionallyqualiedperson.

2) Remove the shipping tape holding the door and the separators inside the storage bin.

3)Removetheprotectiveplasticlmfromtheexterior.Iftheicemakerisexposedtothesunortoheat,removethelmafterthe

icemaker cools.

4) Remove the package containing the accessories. Check the contents according to “2. ACCESSORIES”.

4. LOCATION

WARNING

This icemaker is not intended for outdoor use.

The icemaker should not be located next to ovens, grills or other high heat producing

equipment.

This appliance is not suitable for installation in an area where a water jet could be used.

CAUTION

Thelocationshouldprovidearmandlevelfoundationfortheicemaker.

NOTICE

Do not place anything on top of the icemaker or in front of the air vent.

IMPORTANT

The recommended operating ambient temperature is within 10°C to 35°C. But this icemaker is

capable of operating at 38°C. Water connection is cold water only. Operation of the icemaker,

for extended periods, outside of these normal temperature ranges may affect production

capacity.

This ice maker may be built into a work station or cabinet. There is no minimum clearance

requirement for the top or left and right of the machine.

Side View

Rear

Front

Top

ICEMAKER 15cm

Top View Rear

Front

Left Right

15cm

ICEMAKER

In some high humidity environments, condensation may form inside the machine and drip onto

theoor.Donotinstallwheretheoorcanbeaffectedbywater.

5. INSTALLATION

CAUTION

Incorrect installation can cause harm to people, animals or other items, for which the

manufacturer cannot be held responsible.

* Place the icemaker in the selected permanent location.

5

ENGLISH

6. ELECTRICAL CONNECTIONS

WARNING

THIS APPLIANCE MUST BE EARTHED

This icemaker requires an earth that meets the national and local electrical code requirements.

To prevent possible severe electrical shock to individuals or extensive damage to the unit, install

a proper earth wire to the icemaker.

Disconnect the main power supply before any maintenance, repairs or cleaning is undertaken.

* This appliance requires a separate 220 - 240VAC, 10A supply. The electrical supply must be protected by a suitable circuit

breaker.

*Themaincontrolboxfuseisratedat5Aandshouldonlybereplacedbyaqualiedserviceengineer.

* Usually an electrical permit and services of a licensed electrician are required.

For the U.K. and the Republic of Ireland only

WARNING: Only qualied personnel may disassemble or modify the appliance.

* The wires in the mains lead are coloured in accordance with the following code:

Green & Yellow = Earth

Blue = Neutral

Brown = Live

As the colours of the wire in the mains lead of this appliance may not correspond with the coloured markings identifying the

terminals in the plug, proceed as follows:

The wire which is coloured Green-and-Yellow must be connected to the terminal in the plug which is marked with the letter

E or by the symbol or coloured Green or Green-and-Yellow. The wire which is coloured Blue must be connected to the

terminal which is marked with the letter N or coloured Black. The wire which is coloured Brown must be connected to the

terminal which is marked with the letter L or coloured Red.

* Should the socket outlets in the installation site not be suitable for the plug supplied with the product, the plug must be

removed(cutoffifitismouldedonplug)andanappropriateplugtted.

If the non-rewirable plug has been cut from the power supply cord, it must be disposed of. There should be no attempt to

reuse it. Inserting such a plug into a socket elsewhere presents a serious risk of electrical shock.

*Thenon-rewirableplugmustneverbeusedwithoutafusecoverbeingtted.

 Thecorrectreplacementforthedetachablefusecoverisidentiablefromthemanufacturer’sreferencenumberstampedon

the plug.

Supply of replacement fuse covers can be obtained from Hoshizaki Parts/Service Centres.

Fuses should be rated at 13A and approved to BS 1362.

7. WATER SUPPLY AND DRAIN CONNECTIONS

WARNING

Connect to potable cold water supply only.

* The connections to the mains water supply must be made in accordance with the countries’ current requirements of the Water

Supply or Water Fittings Regulations.

*Icemaking water must be potable water. Where scaling can be caused by water quality, installation of an external lter or

softener is recommended. Contact your local water treatment professional or Hoshizaki service agent.

* Water supply pressure should be minimum 0.07 MPa (0.7 bar) and maximum 0.78 MPa (8 bar). If the pressure exceeds 0.78

MPa (8 bar), use a proper pressure reducing valve. Do NOT throttle back the supply tap.

6

ENGLISH

* A plumbing permit and services of a licensed plumber may be required in some areas.

* The icemaker drain is gravity fed, so ensure the drain hose has an adequate pitch or fall.

* Drain lines should not be installed directly to the sewer system.

* Topreventabackowintothestoragebin,theoutlethosemustbelaidasshown.

* Be sure to use the new hose-sets supplied with the appliance. Do not reuse any old hose-sets.

1)Attachtheangledendofexibleinlethose(accessory)totheG3/4ttingontherearoftheicemakerasindicated,ensuring

rubbersealingwasheriscorrectlypositioned.Handtightensufcientlytoprovideleakfreejoint.

2) Attach the other end of inlet hose to the water tap, noting that the washer is correctly positioned before hand tightening as

described above. It is a wise precaution to have a stop valve within easy reach.

3) Hand tighten grey exible outlet hose (accessory) onto the R3/4 tting on the rear of the icemaker as indicated, ensuring

rubber washer is correctly positioned to obtain a leak free joint. The hose can be cut to length as necessary to suit the position

of the main drain.

II. OPERATING INSTRUCTIONS

CAUTION

Do not put your hands into the back of the storage

bin or the ice chute on top of the storage bin.

Ice may drop off the icemaker, a hard block of

ice may suddenly break down, or the icemaking

mechanism may suddenly move, resulting in injury.

To prevent damage to the bin door, do not lean on or put anything on the door when it is open.

Water Supply Tap

Inlet Hose

Potable Water

Inlet G3/4

Inlet Hose

Drain Outlet R3/4

Outlet Hose

Storage Bin

Ice Chute

Downgrade

GOOD BAD

Upgrade

BAD

7

ENGLISH

NOTICE

All parts are factory-adjusted. Improper adjustments may result in failure.

If the unit is turned off, wait for at least 3 minutes before restarting the icemaker to prevent

damage to the compressor.

HYGIENE

This icemaker is designed to produce edible ice. To keep the icemaker hygienic:

* Wash your hands before removing ice. Use the plastic scoop provided (accessory).

* The storage bin is for ice use only. Do not store anything else in the bin nor use other

electrical appliances in the bin.

* Clean the storage bin before use (see “III. 1. CLEANING”).

* Keep the scoop clean. Clean it by using a neutral cleaner and rinse thoroughly.

* Close the door after removing ice to prevent entrance of dirt, dust or insects into the storage

bin.

1. START UP

1) Plug in the icemaker.

2) Open the water supply tap.

3) Prime the water pump by adding 1 litre of water to the water tank.

4) Move the power switch to the “ON” position.

IMPORTANT

Ensure the tank is primed before ice production commences to assure good quality ice from the

rstcycle.

2. PREPARING THE ICEMAKER FOR LONG STORAGE

NOTICE

This icemaker will not work at subfreezing temperatures. To prevent damage to the water

supply line, drain the icemaker when air temperature is below zero.

HYGIENE

When shutting down the icemaker for two or more days, drain the icemaker to prevent

contamination in the water circuit.

1) Unplug the icemaker.

2) Close the water supply tap, and remove the inlet hose.

3) Remove all ice from the storage bin, and clean the bin.

4)Askaprofessionallyqualiedpersontodraintheicemaker.

8

ENGLISH

III. MAINTENANCE

1. CLEANING

WARNING

Before carrying out any cleaning or maintenance operations, unplug the icemaker from the

electrical supply network.

This appliance must not be cleaned by use of a water jet.

CAUTION

When using a neutral cleaner or sodium hypochlorite, thoroughly read and understand the

instructions provided to prevent potential health problems.

NOTICE

It is recommended to ask a trained service person to clean and sanitise the icemaker water system.

Ask a trained service person to check and clean the condenser at least twice a year.

In areas where the water supply has a high mineral content, the spray jets may need frequent

cleaning.Increasingtheharvesttimewillushmorewaterandhelptoreducethefrequencyof

cleaning.

To prevent possible damage, do not clean the plastic parts with water above 40°C or in a

dishwasher.

Note: The wash switch on the front of the control box is intended for use by service

personnel only. During normal icemaking operation, keep the wash switch in the

“ICE” position.

[a] Machine and Bin Exterior

Wipe the exterior at least once per week with a clean, soft cloth. Use a damp cloth

containing a neutral cleaner to wipe off grease or dirt.

[b] Scoop and Storage Bin Handle Cleaning/Sanitisation (Daily)

1) Either mix 1 litre of water with 4 ml of 5.25% sodium hypochlorite solution in a suitable container, or the recommended

Hoshizaki sanitiser as directed.

2) Soak the scoop in the solution for more than 3 minutes. Rinse thoroughly, and shake to remove surplus liquid.

Note: Using a cloth to dry may re-contaminate.

3) Use a neutral cleaner to wash the storage bin handle. Rinse thoroughly.

4) Soak a clean cloth with the sanitising solution, and wipe the handle. Use fresh water and a clean cloth to rinse/dry.

[c] Storage Bin Interior Cleaning/Sanitisation (Weekly)

1) Open the storage bin door, and remove all ice.

2) Wash the bin liner with a neutral non-abrasive cleaner. Rinse thoroughly.

3) Soak a clean cloth with the neutral cleaner, and wipe both sides of the slope and the door inner surface. Wipe off the cleaner

with a clean damp cloth.

4) Either mix 5 litres of water with 18 ml of 5.25% sodium hypochlorite solution in a suitable container, or the recommended

Hoshizaki sanitiser as directed.

5) Soak a clean sponge or cloth with the solution, and wipe the bin liner, bin door and slope.

Wash Switch

9

ENGLISH

6) The remaining solution can be used to sanitise utensils.

Note: Do not wipe dry or rinse after sanitising, but allow to air dry.

[d] Water Tank, Spray Assembly, Separator and Ice Chute Cleaning/Sanitisation (Monthly)

1) Move the power switch to the “OFF” position.

2) Unplug the icemaker.

3) Open the storage bin door, and remove all ice.

4) Remove each separator by lifting it to the horizontal position and pushing it hard

inward. Remove all the separators in the same way, and clean and sanitise them.

5) Disconnect the water pipe by the drain to remove water in the tank.

6) Spread out the tabs on both sides to unlock the water tank, and pull it out toward you.

Clean and sanitise the water tank.

7) Lift off the ice chute from the front frame pipe and then from the rear frame pipe.

Clean and sanitise the ice chute.

8) Pull the discharge tube from the spray assembly. Remove the assembly by

pulling it toward you.

9) Remove the two caps to clean and sanitise the spray assembly. If the nozzles are clogged, clean

them with a wire or a suitable brush.

Frame Pipe

Ice Chute

Pull out

Unlock Unlock

Separator

Water Pipe

Water Tank

Cap

Discharge Tube

Spray Assembly

10

ENGLISH

10)Retthetwocapsonthecleaningoutletstosealthemoff.

11) Slide the spray assembly along the rails on the right and left brackets. Ret the

dischargetubesecurelyonthesprayoutlet.Aloosettingmaycauseawaterleak.

12) Position and lock the ice chute on to the front and rear frame pipes by pushing the chute down

until it clicks on to both pipes.

13) Slide in the water tank along the rails at the bottom of the right and left brackets until

it clicks into place.

14)Retthewaterpipesecurelyinthearrowdirection.Aloosettingmaycauseawaterleak.

15) Hook each separator on to the rail, and pull it hard toward you until it locks in place with a click.

Retalltheseparatorsinthesameway.

16) Check for water leaks and proper ice production.

17) Follow the steps in “II. 1. START UP”.

2. BEFORE CALLING FOR SERVICE

WARNING

Do not damage the refrigerant circuit.

If the icemaker does not work properly or does not work at all, then before calling for service, check that:

* The power is supplied to the unit.

* The water is turned on.

For further assistance or advice, contact your local Hoshizaki service agent.

Frame Pipe Bracket

Rail Rail

Bracket

Lock Lock

11

ENGLISH

3. DISPOSAL

Comply with local regulations regarding disposal of this appliance and its refrigerant gas. Before you scrap the appliance, take

off the door to prevent children becoming trapped.

Correct disposal of this product:

This marking indicates that this product should not be disposed with other household wastes throughout the EU. To

prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly

to promote the sustainable reuse of material resources. To return your used device, use the return and collection

systems or contact the retailer where the product was purchased. They can take this product for environmental safe

recycling.

4. WARRANTY

Hoshizaki warrants to the original owner/user that all Hoshizaki branded products shall be free of defects in material and/or

workmanship for the duration of the “warranty period”. The warranty shall be effective for two years from the date of installation.

Hoshizaki’s liability under the terms of the warranty are limited and shall exclude routine servicing, cleaning, essential

maintenance and/or repairs occasioned by misuse and installations not in accordance with Hoshizaki guidelines.

Warranty repairs should be completed by an approved Hoshizaki dealer or service agency using genuine Hoshizaki components.

To obtain full details of your warranty and approved service agency, please contact your dealer/supplier, or the nearest Hoshizaki

Serviceofce:

Hoshizaki UK - UK, Ireland

TEL: +44 845 456 0585

FAX: +44 132 283 8331

[email protected]

Hoshizaki Nederland & België - Netherlands, Belgium,

Luxembourg

TEL: +31 20 5650420 (Nederland)

TEL: +32 2 712 30 30 (België)

FAX: +31 20 6918768

[email protected] (Nederland)

[email protected] (België)

Hoshizaki Deutschland - Germany, Switzerland, Austria

TEL: +49 2154 92810

FAX: +49 2154 928128

[email protected]

Hoshizaki France - France

TEL: +33 1 48 63 93 80

FAX: +33 1 48 63 93 88

[email protected]

Hoshizaki Europe B.V. - all other countries within Europe

and Africa

TEL: +31 20 6918499

FAX: +31 20 6918768

[email protected]

Hoshizaki Iberia - Spain, Portugal

TEL: +34 93 478 09 52

FAX: +34 93 478 08 00

[email protected]

SPECIFICATIONS

Model AM-20CAE

Type Air-cooled, column ice

Power Supply 1 phase 220 - 240V 50Hz

Electric Consumption 238W

Ice Production per 24h 28kg (ambient 10°C, water 10°C)

Dimensions 350mm(W) x 444mm(D) x 590mm(H)

Refrigerant R134a, 130g

Weight Net: 28kg (Gross: 33.5kg)

Ambient Temp 10 - 35°C (Capable of operating at 38°C)

Water Supply Temp 5 - 35°C

Water Supply Pressure 0.07 - 0.78 MPa (0.7 - 8 bar)

Voltage Range Rated voltage ± 6%

12

ENGLISH

This product includes a hermetically sealed refrigeration system that contains uorinated greenhouse gases covered

by the Kyoto Protocol:

AM-20CAE R134a / GWP 1430 / 0.13kg

This product meets the essential health and safety requirements demanded by the following regulations:

EMC Directive (2004/108/EC)

Low Voltage Directive (2006/95/EC)

RoHS Directive (2011/65/EU)

Food Contact Materials Regulation (EC 1935/2004)

Manufacturer: Hoshizaki Europe Ltd.

Telford 70 Stafford Park 7, Telford, Shropshire TF3 3BQ England

13

FRANCAIS

INFORMATIONS DE SECURITE IMPORTANTES

Tout au long de ce manuel, des avis attirent votre attention sur des situations qui pourraient

entraîner la mort, des blessures graves ou des dégâts à l’appareil.

AVERTISSEMENT Signale une situation dangereuse qui, si elle n’est pas évitée, peut

entraîner des blessures graves voire mortelles.

ATTENTION Signale une situation dangereuse qui, si elle n’est pas évitée, peut

entraîner des blessures mineures ou modérées.

AVIS Signale une situation dangereuse qui, si elle n’est pas évitée, peut

entraîner des dégâts à l’appareil.

HYGIENE Signale des précautions importantes à prendre en matière d’hygiène

et de sécurité alimentaire.

IMPORTANT Signale des informations importantes sur l’utilisation de l’appareil et

son entretien.

IMPORTANT

Ce livret est un élément essentiel qui fait partie intégrante du produit et il doit être conservé

soigneusement par l’utilisateur.

Veuillez lire attentivement les conseils et les avertissements qui s’y trouvent, car ils ont pour

but de fournir à l’installateur et à l’utilisateur des informations essentielles pour une installation

correcte, une utilisation en toute sécurité et un entretien adéquat du produit.

Veuillez conserver précieusement ce livret pour toute référence ultérieure.

AVERTISSEMENT

Cette machine à glace a été conçue pour des applications commerciales ; elle ne peut être

utilisée qu’aux ns auxquelles elle est expressément destinée.

Toute autre utilisation doit être considérée comme inappropriée et donc dangereuse.

Le fabricant décline toute responsabilité pour les dégâts provoqués par une utilisation

inappropriée, incorrecte et abusive.

L’installation, et le transfert le cas échéant, doivent être effectués par un personnel

qualié, conformément aux réglementations en vigueur et aux consignes du fabricant.

Veillez à ce que les ouvertures de ventilation de l’enceinte de l’appareil et de la structure

intégrée ne soient pas obstruées.

14

FRANCAIS

L’utilisation de tout appareil électrique implique le respect de certaines règles fondamentales.

En particulier :

* La présence d’une humidité élevée augmente le risque de courts-circuits électriques et de

décharges électriques. En cas de doute, débrancher la machine à glace.

* Ne pas endommager le cordon d’alimentation et ne pas tirer dessus pour débrancher la

machine à glace.

* Si le cordon d’alimentation est endommagé, il doit être remplacé par un cordon de rechange

disponible auprès des centres de pièces détachées et d’entretien Hoshizaki.

* Ne pas toucher les pièces électriques ni les commutateurs avec les mains humides ou

mouillées.

* Cette machine n’est pas prévue pour une utilisation par des personnes (y compris des

enfants) aux capacités physiques, sensorielles ou mentales réduites, ou manquant

d’expérience ou de connaissances. Elle peut cependant être utilisée par des enfants d’au

moins 8 ans et des personnes aux capacités physiques, sensorielles ou mentales réduites,

ou manquant d’expérience ou de connaissances, si une personne responsable de leur

sécurité les surveille ou leur a indiqué les consignes d’utilisation de la machine.

* Les enfants ne doivent pas être autorisés à jouer avec la machine.

* Le nettoyage et l’entretien régulier ne doivent pas être effectués par des enfants sans

surveillance.

* Ne pas tenter de modier la machine à glace. Cet appareil ne peut être démonté ou réparé

que par du personnel qualié.

15

FRANCAIS

I. CONSIGNES D’INSTALLATION

1. CONSTRUCTION

ATTENTION

Ne pas se mettre debout ni s’asseoir sur la machine. Cela entraînerait un risque de dommages

important.

IMPORTANT

Ne retirer aucun panneau de service xé avec des vis.

2. ACCESSOIRES

CD 1

Pelle à glaçons 1

Flexible d’arrivée 1

Tuyau de sortie 1

Capot de connecteur 1

3. DEBALLAGE

AVERTISSEMENT

Les enfants doivent être tenus à l’écart des éléments d’emballage (sacs en plastique et

polystyrène expansé) car ils constituent des sources de danger potentielles.

ATTENTION

Ne pas soulever ou déplacer le carton en utilisant les sangles d’emballage.

Lors du déplacement manuel de l’appareil, respecter les réglementations locales/nationales et

retirer l’appareil de sa base lorsqu’il est soulevé.

Toujours porter des gants de protection lors du transport de l’appareil.

Panneau supérieur

Panneau avant

(inférieur)

Pente

Cordon d’alimentation

Ouverture d’aération

Poignée

Porte de bac

Commutateur de marche/arrêt

Bac de stockage

Séparateur

Tuyau de sortie

CD Flexible d’arrivée Capot de connecteur

Pelle à glaçons

16

FRANCAIS

Lors de la manipulation du carton ou de l’appareil déballé, travailler à deux pour éviter les

blessures.

AVIS

Enlever le carton de transport, le ruban adhésif et le matériel d’emballage. S’il reste des

matériaux d’emballage dans la machine à glace, elle ne fonctionnera pas correctement.

1) Après avoir enlevé le matériel d’emballage, vérier que la machine à glace est en bon état. En cas de doute, ne pas utiliser la

machine à glace et faire appel à un technicien qualié.

2) Enlever le ruban adhésif retenant la porte et les séparateurs à l’intérieur du bac de stockage.

3) Retirer le lm protecteur en plastique recouvrant l’extérieur de la machine. Si la machine à glace a été exposée au soleil ou à

la chaleur, la laisser refroidir avant d’enlever le lm.

4) Retirer le paquet contenant les accessoires. Vérier le contenu conformément à « 2. ACCESSOIRES ».

4. EMPLACEMENT

AVERTISSEMENT

Cette machine à glace n’est pas conçue pour être utilisée à l’extérieur.

La machine à glace ne doit pas être placée à proximité de fours, de grills ou de toute autre

source de chaleur importante.

Cet appareil n’est pas conçu pour être installé dans une zone où un jet d’eau peut être utilisé.

ATTENTION

La machine à glace doit avoir une assise solide et horizontale.

AVIS

Ne rien poser sur le dessus de la machine à glace ni devant l’ouverture d’aération.

IMPORTANT

La température ambiante de service recommandée est comprise entre 10 °C et 35 °C. Cette

machine à glace peut cependant fonctionner à 38 °C. Seul un raccordement à l’eau froide est

possible. Le fonctionnement de la machine en dehors de ces plages de températures, pendant

des durées prolongées, risque d’affecter la capacité de production de glaçons.

Cette machine à glace peut être intégrée à un poste de travail ou un coffret. Aucun espace

minimal n’est requis en haut, à gauche et à droite de la machine.

Vue latérale

Arrière

Avant

Haut

MACHINE

A GLACE 15cm

Vue de dessus Arrière

Avant

Gauche Droite

15cm

MACHINE A GLACE

Dans certains environnements très humides, de la condensation peut se former à l’intérieur

de la machine et couler sur le sol. Ne pas installer l’appareil sur un sol que l’eau pourrait

endommager.

17

FRANCAIS

5. INSTALLATION

ATTENTION

Une installation incorrecte de la machine peut avoir des conséquences néfastes sur les

personnes, les animaux ou d’autres choses, pour lesquelles le fabricant ne peut être tenu

responsable.

* Placer la machine à glace à l’emplacement choisi pour son installation.

6. BRANCHEMENTS ELECTRIQUES

AVERTISSEMENT

CET APPAREIL DOIT ETRE MIS A LA TERRE

Cette machine à glace doit avoir une mise à la terre qui respecte les réglementations

électriques nationales et locales.

Pour éviter tout risque de décharges électriques graves ou de dégâts importants à l’appareil,

installer un câble de mise à la terre approprié sur la machine.

Avant toute opération de maintenance, réparation ou nettoyage, débrancher l’alimentation

électrique.

* Cet appareil nécessite une alimentation 220 - 240 V CA 10A séparée. L’alimentation électrique doit être protégée par un

disjoncteur approprié.

* Le fusible du boîtier de commande principal est étalonné à 5 A et ne doit être remplacé que par un technicien d’entretien

qualié.

* Il faut généralement obtenir une autorisation pour effectuer l’installation électrique et recourir aux services d’un électricien

qualié.

Pour le Royaume-Uni et la République d’Irlande uniquement

AVERTISSEMENT : Cet appareil ne peut être démonté ou modié que par du personnel qualié.

* Les ls du cordon d’alimentation électrique présentent le codage couleur suivant :

Vert et jaune = Terre

Bleu = Neutre

Marron = Sous tension

La couleur des conducteurs du cordon d’alimentation de cet appareil peut ne pas correspondre au marquage couleur des

bornes de la che ; dans ce cas, procéder comme suit :

Le l vert et jaune doit être relié à la borne de la che repérée par la lettre E ou par le symbole ou la couleur verte ou

verte et jaune. Le conducteur bleu doit être raccordé à la borne portant la lettre N ou de couleur noire. Le conducteur marron

doit être raccordé à la borne portant la lettre L ou de couleur rouge.

* Si la che livrée avec la machine ne convient pas aux prises du local d’installation, l’enlever (la couper s’il s’agit d’une che

moulée) et en monter une autre.

Une che non recâblable enlevée doit être jetée. Elle ne peut en aucun cas être réutilisée. L’insertion de ce type de che

dans une autre prise présente des risques graves de décharges électriques.

* La che non recâblable ne doit jamais être utilisée sans un protège-fusible.

Le numéro de référence du protège-fusible amovible est imprimé sur la che. Utiliser cette référence pour toute commande

de pièce.

Il est possible de se procurer des protège-fusibles de remplacement auprès des centres de pièces détachées et d’entretien

Hoshizaki.

La capacité nominale des fusibles doit être de 13A ; ils doivent être agréés selon la norme BS 1362.

La pagina sta caricando ...

Hoshizaki AM-20CAE Manuale del proprietario

Questo manuale è adatto anche per

Hoshizaki AM-20CAE Manuale del proprietario

in altre lingue

Documenti correlati

Altri documenti