ESAB Tig 4300i AC/DC Manuale utente
- Categoria
- Sistema di saldatura
- Tipo
- Manuale utente
Valid for serial no. 710--xxx--xxxx0460 157 001 070309
Tig 4300i AC/DC
Origo t
Instruction manual Èíñòðóêöèÿ ïî ýêñïëóàòàöèè
-- 2 --
Rights reserved to alter specifications without notice.
Îñòàâëÿåì çà ñîáîé ïðàâî èçìåíÿòü ñïåöèôèêàöèþ áåç ïðåäóïðåæäåíèÿ.
Ðóññêèé 3...............................................
ENGLISH 14..............................................
Ðóññêèé
TOCr
-- 3 --
1 ÒÅÕÍÈÊÀ ÁÅÇÎÏÀÑÍÎÑÒÈ 4........................................
2 ÂÂÅÄÅÍÈÅ 6.......................................................
2.1 Îáîðóäîâàíèå 6...........................................................
2.2 Ïàíåëü óïðàâëåíèÿ 6.......................................................
3 ÒÅÕÍÈ×ÅÑÊÈÅ ÕÀÐÀÊÒÅÐÈÑÒÈÊÈ 6................................
4ÓÑÒÀÍÎÂÊÀ 7.......................................................
4.1 Èíñòðóêöèè ïî ïîäúåìó 8..................................................
4.2 Ðàçìåùåíèå 8.............................................................
4.3 Ñåòü ýëåêòðîïèòàíèÿ 8.....................................................
5 ÏÎÐßÄÎÊ ÐÀÁÎÒÛ 9...............................................
5.1 Ñîåäèíåíèå è óñòðîéñòâà óïðàâëåíèÿ 9.....................................
5.2 Óñëîâíûå îáîçíà÷åíèÿ 10...................................................
5.3 Âêëþ÷åíèå èñòî÷íèêà ïèòàíèÿ 10............................................
5.4 Óïðàâëåíèå âåíòèëÿòîðàìè 10...............................................
5.5 Çàùèòà îò ïåðåãðåâà 10.....................................................
5.6 Áëîê îõëàæäåíèÿ 10........................................................
6 ÒÅÕÍÈ×ÅÑÊÎÅ ÎÁÑËÓÆÈÂÀÍÈÅ 11.................................
6.1 Î÷èñòêà âîçäóøíîãî ôèëüòðà 11.............................................
6.2 Äîëèâ îõëàæäàþùåé æèäêîñòè 12...........................................
7 ÂÛßÂËÅÍÈÅ ÍÅÈÑÏÐÀÂÍÎÑÒÅÉ 12.................................
8 ÈÍÔÎÐÌÀÖÈß ÄËß ÇÀÊÀÇÀ ÇÀÏÀÑÍÛÕ ×ÀÑÒÅÉ 13.................
ÑÕÅÌÀ 24..............................................................
ÍÎÌÅÐ ÇÀÊÀÇÀ 2 7.....................................................
ÑÏÈÑÎÊ ÇÀÏÀÑÍÛÕ ×ÀÑÒÅÉ 28........................................
ÄÎÏÎËÍÈÒÅËÜÍÛÅ ÏÐÈÍÀÄËÅÆÍÎÑÒÈ 29...........................
bt32d1ra -- 4 --
1 ÒÅÕÍÈÊÀ ÁÅÇÎÏÀÑÍÎÑÒÈ
Ïîëüçîâàòåëè ñâàðî÷íîãî îáîðóäîâàíèÿ ESAB îòâå÷àþò çà âûïîëíåíèå ïðàâèë òåõíèê è
áåçîïàñíîñòè ëèöàìè, ðàáîòàþùèìè íà îáîðóäîâàíèè è ðÿäîì ñ íèì. Ïðàâèëà òåõíèêè
áåçîïàñíîñòè äîëæíû îòâå÷àòü òðåáîâàíèÿì ê áåçîïàñíîé ýêñïëóàòàöèè ñâàðî÷íîãî
îáîðóäîâàíèÿ ýòîãî òèïà. Ïîìèìî ñòàíäàðòíûõ ïðàâèë òåõíèêè áåçîïàñíîñòè è îõðàíû
òðóäà íà ðàá î÷åì ìåñòå ðåêîìåíäóåòñÿ ñëåäóþùåå.
Âñå ðàáîòû äîëæíû âûïîëíÿòüñÿ ïîäãîòîâëåííûìè ëèöàìè, çíàêîìûìè ñ ýêñïëóàòàöèåé
ñâàðî÷íîãî îáîðóäîâàíèÿ. Íåïðàâèëüíàÿ ýêñïëóàòàöèÿ îáîðóäîâàíèÿ ìîæåò âûçâàòü
îïàñíûì ñèòóàöèè, ïðèâîäÿùèå ê òðàâìèðîâàíèþ ïåðñîíàëà è ïîâðåæäåíèþ
îáîðóäîâàíèÿ.
1. Bñå ëèöà, èñïîëüçóþùèå ñâàðî÷íîå îáîðóäîâàíèå, äîëæíû çíàòü:
S èíñòðóêöèè ïî ýêñïëóàòàöèè
S ðàñïîëîæåíèå îðãàíîâ àâàðèéíîãî îñòàíîâà
S íàçíà÷åíèå îáîðóäîâàíèÿ
S ïðàâèëà òåõíèêè áåçîïàñíîñòè
S òåõíîëîãèþ ñâàðêè
2. Îïåðàòîð îáåñïå÷èâàåò:
S óäà ëåíèå ïîñòîðîííèõ ëèö èç ðàá î÷åé çîíû îáîðóäîâàíèÿ ïðè åãî çàïóñêå
S çàùèòó âñåõ ëèö îò â îçäåéñòâèÿ ñâàðî÷íîé äóãè
3. Ðàáî÷åå ìåñòî äîëæíî:
S îòâå÷àòü óñëîâèÿì ýêñïëóàòàöèè
S íå èìåòü ñêâîçíÿêîâ
4. Ñðåäñòâà çàùèòû ïåðñîíàëà
S Âî âñåõ ñëó÷àÿõ ðåêîìåíäóåòñÿ èñïîëüçîâàòü èíäèâèäóàëüíûå ñðåäñòâà çàùèòû,
íàïðèìåð, çàùèòíûå î÷êè, îãíåñòîéêóþ ñïåöîäåæäó è çàùèòíûå ðóêàâèöû.
S Ïðè ñâàðêå çàïðåùàåòñÿ íîñèòü ñâîáîäíóþ îäåæäó, óêðàøåíèÿ è ò.ä., íàïðèìåð,
øàðôû, áðàñëåòû, êîëüöà, êîòîðûå ìîãóò ïîïàñòü â ñâàðî÷íîå îáîðóäîâàíèå èëè
âûçâàò ü îæîãè.
5. Îáùèå ìåðû ïðåäîñòîðîæíîñòè
S Ïðîâåðüòå íàäåæíîñòü ïîäêëþ÷åíèÿ îáðàòíîãî êàáåëÿ.
S Ðàáîòû íà îáîðóäîâàíèè ñ âûñîêèì íàïðÿæåíèåì äîëæíû ïðîèçâîäèòüñÿ
òîëüêî êâàëèôèöèðîâàííûì ýëåêòðèêîì.
S Â ïðåäåëàõ äîñòóïà äîëæíû íàõîäèòüñÿ ñîîòâåò ñòâóþùèå ñðåäñòâà
ïîæàðîòóøåíèÿ, èìåþùèå ÿñíóþ ì àðê èðîâêó.
S Çàïðåùàåòñÿ ïðîâîäèòü ñìàçêó è òåõíè÷åñêîå îáñëóæèâàíèå îáîðóäîâàíèå âî
âðåìÿ ýêñïëóàòàöèè.
RU
bt32d1ra -- 5 --
Ïåðåä íà÷àëîì ìîíòàæà è ýêñïëóàòàöèè âíèìàòåëüíî èçó÷èòå ñîîòâåòñòâóþùèå èíñòðóêöèè.
ÇÀÙÈÒÈÒÅ ÑÅÁß È ÄÐÓÃÈÕ!
ÎÑ ÒÎÐÎÆÍÎ!
ÄÓÃÎÂÀß ÑÂÀÐÊÀ È ÐÅÇÊÀ ÎÏÀÑÍÛ ÊÀÊ ÄËß ÈÑÏÎËÍÈÒÅËß ÐÀÁÎÒ, ÒÀÊ È ÄËß
ÏÎÑÒ ÎÐÎÍÍÈÕ ËÈÖ. ÒÐÅÁÓÉÒÅ ÑÎÁËÞÄÅÍÈÅ
ÂÑÅÕ ÏÐÀÂÈË ÁÅÇÎÏÀÑÍÎÑÒÈ,
ÄÅÉÑÒ
ÂÓÞÙÈÕ ÍÀ ÎÁÚÅÊÒÅ, ÊÎÒÎÐÛÅ ÄÎËÆÍÛ Ó×ÈÒÛÂÀÒÜ ÑÂÅÄÅÍÈß ÎÁ ÎÏÀÑÍÎÑÒßÕ,
ÏÐÅÄÑÒÀ
ÂËÅÍÍÛÅ ÈÇÃÎÒÎÂÈÒÅËÅÌ ÑÂÀÐÎ×ÍÎÃÎ ÎÁÎÐÓÄÎÂÀÍÈß.
ÎÏÀÑÍÎÑÒÜ ÑÌÅÐÒÅËÜÍÎÃÎ ÏÎÐÀÆÅÍÈß ÝËÅÊÒÐÈ×ÅÑÊÈÌ ÒÎÊ ÎÌ.
S Ñâàðî÷íûé àãðåãàò óñòàíàâëèâàåòñÿ è çàçåìëÿåòñÿ â ñîîòâå òñòâèè ñ äåéñòâóþùèìè íîðìàìè è
ïðàâèëàìè.
S Íå äîïóñêàéòå ê îíò àêòà íàõîäÿùèõñÿ ïîä íàïðÿæåíèåì äåòàëåé è ýëåêòðîäîâ ñ íåçàùèùåííûìè
÷àñòÿìèòåëà,ìîêðûìèðóêàâèöàìèèìîêðîéîäåæäîé.
S Îáåñïå÷üò å ýëåêòðè÷åñêóþ èçîëÿöèþ îò çåìëè è ñâàðèâàåìûõ äåòàëåé.
S Îáåñïå÷üòå ñî áëþäåíèå áåçîïàñíûõ ðàáî÷èõ ðàññòîÿíèé.
ÄÛÌÛ È ÃÀÇÛ ìîãóò áûòü îïàñíû äëÿ ÷åëîâåêà
S Èñêëþ÷èòå âîçìî æíîñòü âîçäåéñòâèÿ äûìîâ.
S Äëÿ èñêëþ÷åíèÿ âäûõàíèÿ äûìîâ âî âðåìÿ ñâàðêè îðãàíèçóåòñÿ îáùàÿ âåíòèëÿöèÿ ïîìåùåíèÿ, à
òàêæåâûòÿæíàÿâåíòèëÿöèÿèççîíûñâàðêè.
ÈÇËÓ×ÅÍÈÅ ÄÓÃÈ âûçûâàåò ïîðàæ åíèå ãëàç è îæîãè êîæè.
S Çàùèòèòå ãëàçà è êîæó. Äëÿ ýòîãî èñïîëüçóéòå çàùèòíûå ùèòêè, öâåòíûå ëèíçû è çàùèòíóþ
ñïåöîäåæäó.
S Äëÿ çàùèòû ïîñò îðîííèõ ëèö ïðèìåíÿþòñÿ çàùèòíûå ýêðàíû èëè çàíàâåñè.
ÏÎÆÀÐÎÎÏÀÑÍÎÑÒÜ
S Èñêðû (áðûçãè ìåòàëëà) ìîãóò âûçâàòü ïîæàð. Óáåäèòåñü â îòñóòñòâèè ãîðþ÷èõ ìàòåðèàëîâ
ïîáëèçîñòè îò ìåñòà ñâàðêè.
ØÓÌ - ×ðåçìåðíûé øóì ìîæåò ïðèâåñòè ê ïîâðåæäåíèþ îðãàíîâ ñëóõà
S Ïðèìèòå ìåðû äëÿ çàùèòû ñëóõà. Èñïîëüçóéòå çàòû÷êè äëÿ óøåé èëè äðóãèå ñðåäñòâà çàùèòû
ñëóõà.
S Ïðåäóïðåäèòå ïîñòîðîííèõ ëèö îá îïàñíîñòè.
ÍÅÈÑÏÐÀÂÍÎÑÒÈ -- Ïðè íåèñïðàâíîñòè îáðàòèòåñü ê ñïåöèàëèñòàì ïî ñâàðî÷íîìó
îáîðóäîâàíèþ
Êîìïàíèÿ ESAB ãîòîâà ïðåäîñòàâèòü âàì âñå çàùèòíîå ñíàðÿæåíèå è
ïðèíàäëåæíîñòè, íå îáõîäèìûå äëÿ âûïîëíåíèÿ ñâàðî÷íûõ ð àáîò.
ÂÍÈÌÀÍÈÅ!
Ïåðåä íà÷àëîì ìîíòàæà è ýêñïëóàòàöèè âíèìàòåëüíî
èçó÷èòå ñîîòâåòñòâóþùèå èíñòðóêöèè.
Çàïðåùàåòñÿ èñïîëüçîâàòü èñòî÷íèê ïèòàíèÿ äëÿ îòòàèâàíèÿ ò ðóá.
ÂÍÈÌÀÍÈÅ!
Äàííîå èçäåëèå ïðåäíàçíà÷åíî òîëüêî äëÿ äóãîâîé ñâàðêè.
RU
bt32d1ra -- 6 --
2 ÂÂÅÄÅÍÈÅ
Tig 4300i AC/DC ïðåäñòàâëÿåò ñîáîé èñòî÷íèê ïèòàíèÿ äëÿ äóãîâîé ñâàðêè
âîëüôðàìîâûì ýëåêòðîäîì â çàùèòíîì ãàçå (TIG), êîòîðûé ìîæíî òàêæå
èñïîëüçîâàòü ä ëÿ ðó÷íîé äóãîâîé ñâàðêè ìåòàëëè÷åñêèì ïëàâÿùèìñÿ
ýëåêòðîäîì (MMA). Èñòî÷íèê ïèòàíèÿ äëÿ äóãîâîé ñâàðêè ïðåäóñìàòðèâàåò
âîçìîæíîñòü ýêñïëóàòàöèè êàê ñ ïåðåìåííûì (AC), òàê è ñ ïîñòîÿííûì (DC)
òîêîì.
Àêñåññóàð² îò äëÿ èçäåëÿ ìîæíî íàéòè íà ñòðíèöå 29.
2.1 Îáîðóäîâàíèå
 êîìïëåêò ïîñòàâêè èñòî÷íèêà ïèòàíèÿ âõîäÿò ñåòåâîé øíóð äëèíîé 5 ì ñ
âèëêîé, îáðàòíûé êàáåëü äëèíîé 5 ì, ðóêîâîäñòâà ïî ýêñïëóàòàöèè èñòî÷íèêà
ïèòàíèÿ è ïàíåëè óïðàâëåíèÿ.
2.2 Ïàíåëü óïðàâëåíèÿ
S TA24 AC/DC
Ïîäðîáíûå ñâåäåíèÿ î ïàíåëÿõ óïðàâëåíèÿ ïðèâåäåíû â îòäåëüíûõ
èíñòðóêöèÿõ.
3 ÒÅÕÍÈ×ÅÑÊÈÅ ÕÀÐÀÊÒÅÐÈÑÒÈÊÈ
Tig 4300i AC/DC
Íàïðÿæåíèå ñåòè 400 Â, ↓10%, 3∼ 50 Ãö
Òîê â ïåðâè÷íîé îáìîòêå
I
ìàêñ.
TIG
I
ìàêñ.
MMA
25 A
32 A
Ïîòðåáëÿåìàÿ ìîùíîñòü õîëîñòîãî õîäà â
ðåæèìå ýíåðãîñáåðåæåíèÿ, 6,5 ìèí ïîñëå
ñâàðêè
75 Âò
Äèàïàçîí íàïðÿæåíèÿ/òîêà
TIG AC*/DC
MMA
4-430 À
16-430 À
Äîïóñòèìàÿ íàãðóçêà ïðè ñâàðêå TIG
Ê îýôôèöèåíò íàãðóçêè 40 %
Ê îýôôèöèåíò íàãðóçêè 60 %
Ê îýôôèöèåíò íàãðóçêè 100 %
430 À / 27.2 Â
400 À / 26.0 Â
315 À / 22.6 Â
Äîïóñòèìàÿ íàãðóçêà ïðè ñâàðêå MMA
Ê îýôôèöèåíò íàãðóçêè 40 %
Ê îýôôèöèåíò íàãðóçêè 60 %
Ê îýôôèöèåíò íàãðóçêè 100 %
430 À / 37.2 Â
400 À / 36.0 Â
315 À / 32.6 Â
RU
bt32d1ra -- 7 --
Tig 4300i AC/DC
Êîýôôèöèåíò ìîùíîñòè ïðè
ìàêñèìàëüíîì òîêå
TIG
MMA
0.89
0.89
Êïä ïðè ìàêñèìàëüíîì òîêå
TIG
MMA
76 %
80 %
Íàïðÿæåíèå õîëîñòîãî õîäà
MMA
83 Â
Ðàáî÷èé òåìïåðàòóðíûé äèàïàçîí îò -10 äî 40˚C
Òåìïåðàòóðà ïðè òðàíñïîðòèðîâêå îò -25 äî +55˚C
Íåïðåðûâíî äåéñòâóþùåå
ñðåäíåâçâåøåííîå çâóêîâîå äàâëåíèå
<70 äÁ
Ãàáàðèòíûå ðàçìåðû, ÄxØx 625 x 394 x 776
Ìàññà 95 êã
Êëàññ èçîëÿöèè òðàíñôîðìàòîðà H
Ê ëàññ çàùèòû IP 23
Êëàññ ïðèìåíåíèÿ
Áëîê îõëàæäåíèÿ
Õîëîäîïðîèçâîäèòåëüíîñòü 2.0 Âò ïðè ðàçíèöå òåìïåðàòóð 40˚Cè
ðàñõîäå 1,0 ë/ìèí
Îõëàæäàþùàÿ æèäêîñòü 50 % âîäû / 50% ìîíîýòèëåíãëèêîëÿ
Êîëè÷åñòâî æèäêîñòè 5.5 ë
Ìàêñèìàëüíûé ðàñõîä âîäû 2.0 ë/ìèí
*) Âåëè÷èíà ìèíèìàëüíîãî ïåðåìåííîãî òîêà ïðè äóãîâîé ñâàðêå çàâèñèò îò ñîñòàâà
àëþìèíèåâîãî ñïëàâà è ÷èñòîòû ïîâåðõíîñòè ïëàñòèí èç íåãî.
Ðàáî÷èé öèêë
Ðàáî÷èé öèêë ïðåäñòàâëÿåò ñîáîé äîëþ (â %%) äåñÿòèìèíóòíîãî èíòåðâàëà, â òå÷åíèå
êîòîðîé ìîæíî ïðîèçâîäèòü ñâàðêó ïðè îïðåäåëåííîé íàãðóçêå áåç ïåðåãðóçêè.
Ðàáî÷èé öèêë óêàçàí äëÿ òåìïåðàòóðû îêðóæàþùåé ñðåäû 40˚C.
Êëàññ êîæóõà
Íîðìû IP óêàçûâàþò êëàññ êîæóõà, ò.å., ñòåïåíü çàùèòû îò ïðîíèêíîâåíèÿ òâåðäûõ
îáúåêòîâ è âîäû. Îáîðóäîâàíèå ñ ìàðêèðîâêîé IP 23 ïðåäíàçíà÷åíî äëÿ íàðóæíîé è
âíóòðåííåé óñòàíîâêè.
Ê ëàññ çîíû óñòàíîâêè
Ýòîò ñèìâîë îçíà÷àåò, ÷òî èñòî÷íèê ïèòàíèÿ ïðåäíàçíà÷åí äëÿ èñïîëüçîâàíèÿ â çîíàõ
ñ ïîâûøåííîé îïàñíîñòüþ ïîðàæåíèÿ ýëåêòðî òîê îì.
4ÓÑÒÀÍÎÂÊÀ
Ââîä â ýêñïëóàòàöèþ äîëæåí ïðîèçâîäèòüñÿ êâàëèôèöèðîâàííûì
ñïåöèàëèñòîì.
ÂÍÈÌÀÍÈÅ!
Íàñòîÿùåå èçäåëèå ïðåäíàçíà÷åíî äëÿ ïðîìûøëåííîãî èñïîëüçîâàíèÿ. Ïðè
èñïîëüçîâàíèè â áûòîâûõ óñëîâèÿõ îíî ìîæåò ñîçäàâàòü ðàäèî÷àñòîòíûå ïîìåõè.
Ïîëüçîâàòåëü îòâå÷àåò çà ïðèíÿòèå ñîîòâåòñòâóþùèõ ìåð ïðåäîñòîðîæíîñòè.
RU
bt32d1ra -- 8 --
4.1 Èíñòðóêöèè ïî ïîäúåìó
Äëÿ èñò î÷íèêà ïèòàíèÿ Äëÿ èñòî÷íèêà ïèòàíèÿ è òåëåæêè
4.2 Ðàçìåùåíèå
Ðàçìåñòèòå ñâàðî÷íûé èñòî÷íèê ïèòàíèÿ òàêèì îáðàçîì, ÷òîáû èìåþùèåñÿ â
íåì î òâåðñòèÿ äëÿ ïîäâîäà è îòâîäà îõëàæäàþùåãî âîçäóõà íå áûëè
çàãðàæäåíû.
4.3 Ñåòü ýëåêòðîïèòàíèÿ
Óáåäèòåñü â òîì, ÷òî áëîê ïîäêëþ÷åí ê ñåòè
ýëåêòðîïèòàíèÿ ñ òðåáóåìûì íàïðÿæåíèåì è
çàùèùåí ïðåäîõðàíèòåëÿìè òðåáóåìîãî íîìèíàëà.
Íåîáõîäèìî îáåñïå÷èòü çàùèòíîå çàçåìëåíèå â
ñîîòâåòñòâèè ñ äåéñòâóþùèìè íîðìàìè.
Ïàñïîðòíàÿ òàáëè÷êà ñ ïàðàìåòðàìè ñåòè ýëåêòðîïèòàíèÿ.
Ðåêîìåíäóåìûå íîìèíàëû ïðåäîõðàíèòåëåé è ìèíèìàëüíàÿ ïëîùàäü
ïîïåðå÷íîãî ñå ÷ å íèÿ êàáåëåé
Tig 4300i AC/DC TIG MMA
Íàïðÿæåíèå ñåòè 400 Â 3μ 50 Ãö 400 Â 3μ 50 Ãö
Ïëîùà äü ïîïåðå÷íîãî
ñå÷åíèÿ ñèëîâîãî êàáåëÿ
ïèòàíèÿ, ìì
2
4G4 4G4
Ôàçíûé òîê, , I ýôô. 16,9 A 21,9 A
Ïðåäîõðàíèòåëü
Óñòîé÷èâûé ê
ïåðåíàïðÿæåíèÿì
Òèï C, ìèíèàòþðíûé
âûêëþ÷àòåëü
16 A
20 A
20 A
25 A
Âíèìàíèå! Ïðèâåäåííûå âûøå çíà÷åíèÿ ïëîùàäè ïîïåðå÷íîãî ñå÷å íèÿ ñèëîâûõ êàáåëåé
è íîìèíàëû ïðåäîõðàíèòåëåé ñîîòâåòñòâóþò íîðìàì Øâåöèè. Ýêñïëóàòàöèÿ èñòî÷íèêà
ñâàðî÷íîãî òîêà äîëæíà îñóùåñòâëÿòüñÿ â ñîîòâåòñòâèè ñ íîðìàòèâíûìè äîêóìåíòàìè
ñîîòâåòñòâóþùåé ñòðàíû.
RU
bt32d1ra -- 9 --
5 ÏÎÐßÄÎÊ ÐÀÁÎÒÛ
Îáùèå ïðàâèëà òåõíèêè áåçîïàñíîñòè ïðè ðàáîòå ñ îáîðóäîâàíèåì
ïðèâîäÿòñÿ íà ñòð. 4. Ïðî÷òèòå èõ äî èñïîëüçîâàíèÿ îáîðóäîâàíèÿ!
5.1 Ñîåäèíåíèå è óñòðîéñòâà óïðàâëåíèÿ
1 Ñîåäèíèòåëü äëÿ ïîäà÷è îõëàæäàþùåé
âîäû î ò ñâàðî÷íîé ãîðåëêè - ÊÐÀÑÍÛÉ
9 Ñåòåâîé âûêëþ÷àòåëü, 0 / 1 / ÏÓÑÊ
2 Ñîåäèíèòåëü ñ ELP* äëÿ îõëàæäàþùåé
âîäû ê ñâàðî÷íîé ãîðåëêå - ÑÈÍÈÉ
10 Áåëàÿ èíäèêàòîðíàÿ ëàìïà - Èñòî÷íèê
ïèòàíèÿ ÂÊË. (ON)
3 Çàëèâíîå î òâåðñòèå äëÿ îõëàæäàþùåé
âîäû
11 Îðàíæåâàÿ èíäèêàòîðíàÿ ëàìïà -
Ïåðåãðåâ
4 Ñîåäèíèòåëü äëÿ îáðàòíîãî êàáåëÿ (+) 12 Ïàíåëü óïðàâëåíèÿ
(ñì. ñîîòâåòñòâóþùèå èíñòðóêöèè)
5 Ð àçúåì äëÿ ïîäêëþ÷åíèÿ áëîêà
äèñòàíöèîííîãî óïðàâëåíèÿ
13 Ñîåäèíèòåëü äëÿ ïîäà÷è
îõëàæäàþùåé âîäû. Â äàííîé
ìîäåëè íå èñïîëüçóåòñÿ.
6 Ñîåäèíèòåëü äëÿ ñâàðî÷íîãî êàáåëÿ (-)
èëè ãîðåëêè
14 Ñîåäèíèòåëü äëÿ ïîäà÷è
îõëàæäàþùåé âîäû. Â äàííîé
ìîäåëè íå èñïîëüçóåòñÿ.
7 Ãíåçäî äëÿ ñèãíàëà ïóñêà îò ñâàðî÷íîé
ãîðåëêè
15 Ñîåäèíèòåëü ãàçîâîãî øëàíãà.
8 Ñîåäèíèòåëü äëÿ ïîäà÷è ãàçà ê ñâàðî÷íîé
ãîðåëêå TIG
* ELP = Íàñîñ ñ ëîãè÷åñêèì óïðàâëåíèåì ESAB, ñì. ïóíêò 5.6.
AH 0871
RU
bt32d1ra -- 1 0 --
5.2 Óñëîâíûå îáîçíà÷åíèÿ
MMA TIG Çàæèì îáðàòíîãî êàáåëÿ
5.3 Âêëþ÷åíèå èñòî÷íèêà ïèòàíèÿ
Âêëþ÷èòå ïèòàíèå, ïîâåðíóâ âûêëþ÷àòåëü (9) â ïîëîæåíèå «START» (ÏÓÑÊ).
Îòïóñòèòå âûêëþ÷àòåëü, è îí âåðíåòñÿ â ïîëîæåíèå ”1”.
Åñëè òðåáóåòñÿ âðåìåííî îòê ëþ÷èòü ïèòàíèå â ïðîöåññå ñâàðêè, à çàòåì
âíîâü âêëþ÷èòü åãî, òî èñòî÷íèê ïèòàíèÿ áóäåò îñòàâàòüñÿ îáåñòî÷åííûì äî
òåõ ïîð, ïîêà âûêëþ÷àòåëü ñíîâà íå áóäåò âðó÷íóþ ïîâåðíó ò â ïîëîæåíèå
«S TART» (ÏÓÑÊ).
Äëÿ âûêëþ÷åíèÿ èñòî÷íèêà ïèòàíèÿ ïîâåðíèòå âûêëþ÷àòåëü â ïîëîæåíèå ”0”.
Åñëè èñòî÷íèê ïèòàíèÿ îòêëþ÷èòñÿ â ðåçóëüòàòå ñáîÿ ïî ïèòàíèþ èëè
îáû÷íîãî âûêëþ÷åíèÿ âðó÷íóþ, òî ïàðàìåòðû ñâàðêè áóäóò ñîõðàíåíû, òàê
÷òî èõ ìîæíî áóäåò èñïîëüçîâàòü ïðè ñëåäóþùåì âêëþ÷åíèè óñòðîéñòâà.
5.4 Óïðàâëåíèå âåíòèëÿòîðàìè
Âåíòèëÿòîðû èñòî÷íèêà ïèòàíèÿ ïðîäîëæàþò ðàáîòàòü â òå÷åíèå 6,5 ìèí
ïîñëå ïðåêðàùåíèÿ ñâàðêè, è áëîê ïåðåêëþ÷àåòñÿ â ðåæèì
ýíåðãîñáåðåæåíèÿ. Ïðè âîçîáíîâëåíèè ñâàðêè âåíòèëÿòîðû âíîâü íà÷íóò
ðàáîòàòü.
Âåíòèëÿòîðû ðàáîòàþò íà ïîíèæåííûõ îáîðîòàõ ïðè ñâàðî÷íûõ òîêàõ äî 144 A
èíàïîëíûõîáîðîòàõïðèáîëüøèõòîêàõ.
5.5 Çàùèòà îò ïåðåãðåâà
Èñòî÷íèê ïèòàíèÿ èìååò äâà ðåëå çàùèòû îò òåïëîâîé ïåðåãðóçêè, êîòîðûå
ñðàáàòûâàþò ïðè íåäîïóñòèìîì âîçðàñòàíèè âíó òðåííåé òåìïåðàòóðû,
ïðåðûâàÿ ïîäà÷ó ñâàðî÷íîãî òîêà è âêëþ÷àÿ èíäèêàòîðíóþ ëàìïó
îðàíæåâîãî öâåòà íà ïåðåäíåé ïàíåëè óñòðîéñòâà, ïðè ýòîì íà ïàíåëè
îòîáðàæàåòñÿ êîä íåèñïðàâíîñòè. Ïîñëå ñíèæåíèÿ ò å ìïåðà òóðû ñáðîñ ðåëå
ïðîèçâîäèòñÿ àâòîìàòè÷åñêè.
5.6 Áëîê îõëàæäåíèÿ
Âîäÿíîé çà òâîð
Áëîê îõëàæäåíèÿ îáîðóäîâàí ñèñòåìîé ïðîâåðêè ïîäñîåäèíåíèÿ âîäÿíûõ
øëàíãîâELP (ESAB Logic Pump = Ëîãè÷åñêèé Íàñîñ ESAB).
Âûê ëþ÷àòåëü «Âêë./Âûêë.» (On/Off) èñòî÷íèêà ïèòàíèÿ äîëæåí íàõîäèòüñÿ â
ïîëîæåíèè «0» (Off) ïðè ïîäñîåäèíåíèè ñâàðî÷íîé ãîðåëêè TIG ñ âîäÿíûì
îõëàæäåíèåì.
Åñëè ïîäñîåäèíåíà ñâàðî÷íàÿ ãîðåëêà TIG, òî âîäÿíîé íàñîñ àâòîìàòè÷åñêè
íà÷èíàåò ðàáîòàòü, êîãäà ãëàâíûé âûê ëþ÷àòåëü «Âêë./Âûêë.» ïîâåðíóò â
ïîëîæåíèå «START» (ÏÓÑÊ) è(è ëè) êîãäà íà÷àò ïðîöåññ ñâàðêè. Ïîñëå
ïðåêðàùåíèÿ ñâàðêè íàñîñ ïðîäîëæàåò ðàáîòàòü â òå÷åíèå 6,5 ìèí, à çàòåì
ïåðåêëþ÷àåòñÿ â ðåæèì ýíåðãîñáåðåæåíèÿ.
RU
bt32d1ra -- 1 1 --
Ïîðÿäîê ðàáîòû ïðè ñâàðêå
×òîáû íà÷àòü ñâàðêó, ñâàðùèê íàæèìàåò ïóñêîâîé âûêëþ÷àòåëü ãîðåëêè.
Èñòî÷íèê ïèòàíèÿ âêëþ÷àåò ãîðåëêó, áëîê ïîäà÷è ïðîâîëîêè è íàñîñ ïîäà÷è
îõëàæäàþùåé âîäû.
×òîáû îñòàíîâèòü ïðîöåññ ñâàðêè, ñâàðùèê îòïóñêàåò ïóñê îâîé âûêëþ÷àò å ëü
ãîðåëêè. Ïîäà÷à ñâàðî÷íîãî òîêà ïðåêðàùàåòñÿ, îäíàêî íàñîñ ïîäà÷è
îõëàæäàþùåé âîäû ïðîäîëæàåò ðàáî òà òü â ò å ÷åíèå 6,5 ìèí, ïîñëå ÷åãî áëîê
ïåðåêëþ÷àåòñÿ â ðåæèì ýíåðãîñáåðåæåíèÿ.
Çàùèòíîå óñòðîéñòâî ñ äàò÷èêîì ðàñõîäà âîäû
Çàùèòíîå óñòðîéñòâî ñ äàò÷èêîì ðàñõîäà âîäû îòêëþ÷àåò ñâàðî÷íûé òîê ïðè
îòñóòñòâèè îõëàæäàþùåé æèäêîñòè è âûâîäèò ñîîáùåíèå îá îøèáêå íà
ïàíåëü óïðàâëåíèÿ. Çàùèòíîå óñòðîéñòâî ïîñòàâëÿåòñÿ êàê äîïîëíèòåëüíàÿ
ïðèíà äëåæíîñòü, ñì. ñòð 29.
6 ÒÅÕÍÈ×ÅÑÊÎÅ ÎÁÑËÓÆÈÂÀÍÈÅ
Ðåãóëÿðíîå òåõíè÷åñêîå îáñëóæèâàíèå èìååò âàæíîå çíà÷åíèå äëÿ
îáåñïå÷åíèÿ áåçîïàñíîñòè è íàäåæíîñòè.
Ïîäêëþ÷åíèå, îáñëóæèâàíèå è ðåìîíò ñâàðî÷íîãî îáîðóäîâàíèå, ñâÿçàííûå
ñî ñíÿòèåì çàùèòíûõ ùèòêîâ, âûïîëíÿþòñÿ ëèöàìè, ïðîøåäøèìè
ñîîòâåòñòâóþùóþ ýëåêòðîòåõíè÷åñêóþ ïîäãîòîâêó è àòòåñòîâàííûìè íà ïðàâî
âûïîëíåíèÿ òà êèõ ðàáîò.
Ïðèìå÷àíèå:
à àðàíòìèéíûå îáÿçàòåëüñòâà ïîñòàâùèêà òåðÿþò ñèëó, åñëè ïîêóïàòåëú
ñàìîñòîÿòåëúíî ïûòàåòñÿ ïðîèçâåñòè êàêèå-ëèáî ðàáîòû ïî óñòðàíåíèþ
íåèñïðàâíîñòåé èçäåëèÿ â òå÷åíèå ãàðàíòèéíîãî ñðîêà.
6.1 Î÷èñòêà âîçäóøíîãî ôèëüòðà
S Ðàçáëîêèðóéòå âåðõí þþ êðûøêó ñ
ïûëåóëàâëèâàþùèì ôèëüòðîì (1).
S Îòêèíüòå âåðõíþþ êðûøêó (2).
S Èçâëåêèòå ïûëåóëàâëèâàþùèé
ôèëüòð (3).
S Ïðîäóéòå åãî íà÷èñò î ñæàòûì
âîçäóõîì íèçêîãî äàâëåíèÿ.
S Óñòàíîâèòå ôèëüòð íà ìåñòî,
ïîâåðíóâ åãî ñåòêîé ñ áîëåå
ìåëêèìè ÿ÷åéêàìè ê âåðõíåé
êðûøêå (2).
S Çàêðîéòåâåðõíþþêðûøêóâìåñòåñ
ôèëüòðîì.
RU
bt32d1ra -- 1 2 --
6.2 Äîëèâ îõëàæäàþùåé æèäêîñòè
Äîëèâàéòå êàæäûé èç êîìïîíåíòîâ, ïîêà óðîâåíü
îõëàæäàþùåé æèäêîñòè íå äîñòèãíåò çàëèâíîãî îòâåðñòèÿ.
Ðåêîìåíäóåòñÿ ï ðèìåíÿòü õëàäàãåíò
ïðîèçâîäñòâà ESAB. Ñì. ïðèíàäëåæíîñòè
íà ñòð. 29.
ÑÎÁËÞÄÀÉÒÅ ÌÀÊÑÈÌÀËÜÍÓÞ ÎÑÒÎÐÎÆÍÎÑÒÜ!
Ñ îõëàæäàþùåé æèäêîñòüþ ñëåäóåò îáðàùàòüñÿ êàê ñ õèìè÷åñêèìè îòõîäàìè.
7 ÂÛßÂËÅÍÈÅ ÍÅÈÑÏÐÀÂÍÎÑÒÅÉ
Ïðåæäå ÷åì âûçûâàòü àâòîðèçîâàííîãî ñïåöèàëèñòà ïî òåõíè÷åñêîìó
îáñëóæèâàíèþ, ïîïðîáóéòå ñàìîñòîÿòåëüíî âûïîëíèòü ðåêîìåíäóåìûå íèæ å
ïðîâåðêè.
Òèï íåèñïðàâíîñòè Ðåêîìåíäóåìûå ìåðû
Îòñóòñòâèå äóãè S Ïðîâåðüòå, âêëþ÷åí ëè âûêëþ÷àòåëü ïèòàíèÿ.
S Ïðîâåðüòå ïðàâèëüíîñòü ïîäêëþ÷åíèÿ ñâàðî÷íîãî è
îáðàòíîãî ïðîâîäà.
S Ïðîâåðüòå, ïðàâèëüíî ëè çàäàíà âåëè÷èíà òîêà.
S Ïðîâåðüòå ñïîñîá çàïóñêà (HF/Liftarct)
S Ïðîâåðüòå ðàñõîä îõëàæäàþùåé æèäêîñòè.
(ïðàâèëüíîñòü ïîäêëþ÷åíèÿ çàùèòíîãî óñòðîéñòâà ñ
äàò÷èêîì ðàñõ îäà âîäû)
S Ïðîâåðüòå óðîâåíü îõëàæäàþùåé æèäêîñòè.
 ïðîöåññå ñâàðêè ïðîïàë
ñâàðî÷íûé òîê.
S Ïðîâåðüòå,íàëè÷èå ñðàáàòûâàíèÿ óñòðîéñòâà
îòêëþ÷åíèÿ ïðè ïåðåãðåâå (îáîçíà÷àåòñÿ îðàíæåâîé
èíäèêàòîðíîé ëàìïîé íà ïåðåäíåé ïàíåëè), à òàêæå
íàëè÷èå êîäà íåèñïðàâíîñòè, îò îáðàæàåìîãî íà
ïàíåëè.
S Ïðîâåðüòå ðàñõîä îõëàæäàþùåé æèäêîñòè.
S Ïðîâåðüòå ïðåäîõðàíèòåëè â öåïè ñåòåâîãî ïèòàíèÿ.
RU
bt32d1ra -- 1 3 --
Òèï íåèñïðàâíîñòè Ðåêîìåíäóåìûå ìåðû
×àñòîå ñðàáàòûâàíèå ðåëå
çàùèòû îò òåïëîâîé
ïåðåãðóçêè.
S Ïðîâåðüòå, íå çàñîðèëñÿ ëè ïðîòèâîïûëåâîé ôèëüòð.
S Óáåäèòåñü â òîì, ÷òî íå ïðåâûøåíû íîìèíàëüíûå
çíà÷åíèÿ ïàðàìåòðîâ èñòî÷íèêà ïèòàíèÿ (ò.å. ÷òî
óñòðîéñòâî ðàáîòàåò áåç ïåðåãðóçêè).
Íèçêàÿ ýôôåêòèâíîñòü
ñâàðêè.
S Ïðîâåðüòå ïðàâèëüíîñòü ïîäêëþ÷åíèÿ ñâàðî÷íîãî è
îáðàòíîãî ïðîâîäà.
S Ïðîâåðüòå, ïðàâèëüíî ëè çàäàíà âåëè÷èíà òîêà.
S Óáåäèòåñü â òîì, ÷òî èñïîëüçóåòñÿ ýëåêòðîä/ïðîâîëîêà
òðåáóåìîãî òèïà.
S Óáåäèòåñü â òîì, ÷òî èñïîëüçóåòñÿ ñâàðî÷íûé ãàç
òðåáóåìîãî òèïà.
S Ïðîâåðüòå ðàñõîä ãàçà.
S Ïðîâåðüòå ïðåäîõðàíèòåëè â öåïè ñåòåâîãî ïèòàíèÿ.
8 ÈÍÔÎÐÌÀÖÈß ÄËß ÇÀÊÀÇÀ ÇÀÏÀÑÍÛÕ ×ÀÑÒÅÉ
Ðàáîòû ïî ðåìîíòó è ýëåêòðè÷åñêîìó ì îíòàæó äîëæíû âûïîëíÿòüñÿ
êâàëèôèöèðîâàííûì ñïåöèàëèñòîì ESAB .
Íåîáõîäèìî èñïîëüçîâàòü òîëüêî çàïàñíûå ÷àñòè, âûïóùå ííûå ôèðìîé
ESAB.
Çàïàñíûå ÷àñòè ìîæíî çàêàçòú ó áëèæàéøåãî ê Âàì ESAB, (ñì. ïåðå÷åíú íà
ïîñëåäíåé ñòðàíèöå äàííîé áðîøþðû).
RU
ENGLISH
-- 1 4 --
TOCe
1 DIRECTIVE 15........................................................
2SAFETY 15...........................................................
3 INTRODUCTION 17...................................................
3.1 Equipment 17................................................................
3.2 The control panel 17..........................................................
4 TECHNICAL DATA 17.................................................
5 INSTALLATION 18....................................................
5.1 Lifting instructions 19.........................................................
5.2 Placing 19...................................................................
5.3 Mains power supply 19........................................................
6 OPERATION 20.......................................................
6.1 Connection and control devices 20.............................................
6.2 Key to symbols 21............................................................
6.3 Turning on the power source 21................................................
6.4 Fan control 21...............................................................
6.5 Overheating protection 21.....................................................
6.6 Cooling unit 21...............................................................
7 MAINTENANCE 22....................................................
7.1 Cleaning the air filter 22.......................................................
7.2 Topping up the coolant 22.....................................................
8 FAULT TRACING 23...................................................
9 ORDERING OF SPARE PARTS 23......................................
DIAGRAM 24............................................................
ORDERING NUMBER 27.................................................
SPARE PARTS LIST 28...................................................
ACCESSORIES 29.......................................................
-- 1 5 --
bt32d1ea
1DIRECTIVE
DECLARATION OF CONFORMITY
ESAB AB, Welding Equipment, SE--695 81 Laxå, Sweden, gives its unreserved guarantee that weld-
ing power source Tig 4300i AC/DC, Tig 4300iw AC/DC from serial number 710 (2007 w .10) are con-
structed and tested in compliance with the standard EN 60974--1 /--2 /--3 and EN 60974--10 in accord-
ance with the requirements of directive (2006/95/EC) and (2004/108/EEC).
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------
Kent Eimbrodt
Global Director
Equipment and Automation
Laxå 2007--03--01
2SAFETY
Users of ESAB welding equipment have the ultimate responsibility for ensuring that anyone who
works on or near the equipment observes all the relevant safety precautions. Safety precautions
must meet the requirements that apply to this type of welding equipment. The following recommen-
dations should be observed in addition to the standard regulations that apply to the workplace.
All work must be carried out by trained personnel well--acquainted with the operation of the welding
equipment. Incorrect operation of the equipment may lead to hazardous situations which can result
in injury to the operator and damage to the equipment.
1. Anyone who uses the welding equipment must be familiar with:
S its operation
S location of emergency stops
S its function
S relevant safety precautions
S welding
2. The operator must ensure that:
S no unauthorized person is stationed within the working area of the equipment when it is
started up.
S no--one is unprotected when the arc is struck
3. The workplace must:
S be suitable for the purpose
S be free from drafts
4. Personal safety equipment
S Always wear recommended personal safety equipment, such as safety glasses, flame--proof
clothing, safety gloves.
S Do not wear loose--fitting items, such as scarves, bracelets, rings, etc., which could become
trapped or cause burns.
5. General precautions
S Make sure the return cable is connected securely.
S Work on high voltage equipment may only be carried out by a qualified electrician.
S Appropriate fire extinquishing equipment must be clearly marked and close at hand.
S Lubrication and maintenance must not be carried out on the equipment during operation.
GB
-- 1 6 --
bt32d1ea
WARNING
READ AND UNDERSTAND THE INSTRUCTION MANUAL BEFORE INSTALLING OR OPERATING.
ARC WELDING AND CUTTING CAN BE INJURIOUS TO YOURSELF AND OTHERS. TAKE PRECAU-
TIONS WHEN WELDING. ASK FOR YOUR EMPLOYER’S SAFETY PRACTICES WHICH SHOULD BE
BASED ON MANUFACTURERS’ HAZARD DATA.
ELECTRIC SHOCK -- Can kill
S Install and earth the welding unit in accordance with applicable standards.
S Do not touch live electrical parts or electrodes with bare skin, wet gloves or wet clothing.
S Insulate yourself from earth and the workpiece.
S Ensure your working stance is s afe.
FUMES AND GASES -- Can be dangerous to health
S Keep your head out of the fumes.
S Use ventilation, extraction at the arc, or both, to take fumes and gases away from your breathing zone
and the general area.
ARC RAYS -- Can injure eyes and burn skin.
S Protect y our eyes and body. Use the correct welding screen and filter lens and wear protective
clothing.
S Protect bystanders with suitable screens or curtains.
FIRE HAZARD
S Sparks (spatter) can cause fire. Make sure therefore that there are no inflammable materials nearby.
NOISE -- Excessive noise can damage hearing
S Protect y our ears. Use earmuffs or other hearing protection.
S Warn bystanders of the risk.
MALFUNCTION -- Call for expert assistance in the event of malfunction.
PROTECT YOURSELF AND OTHERS!
ESAB can provide you with all necessary welding p rotectio n and accessories.
WARNING!
Read and understand the instruction manual before installing
or operating.
Do not use the power source for thawing frozen pipes.
WARNING!
This product is solely intended for arc welding.
Do not dispose of electrical equipment together with normal waste!
In observance of European Directive 2002/96/EC on Waste Electrical and Electronic
Equipment and its implementation in accordance with national law, electrical equipment
that has reached the end of its life must be collected separately and returned to an
environmentally compatible recycling facility. As the owner of the equipment, you should
get information on approved collection systems from our local representative.
By applying this European Directive you will improve the environment and human health!
GB
-- 1 7 --
bt32d1ea
3 INTRODUCTION
The Tig 4300i AC/DC is a TIG welding power source, which can also be used for
MMA welding. T he power welding source can be used with alternating current (AC)
or direct current (DC).
ESAB’s accessories for the product can be found on page 29.
3.1 Equipment
The power source is delivered with 5 m mains cable incl the plug, 5 m return cable,
instruction manuals for the power source and for the control panel.
3.2 The control panel
S TA24 AC/DC
See the separate instructions for detailed descriptions of the control panel.
4 TECHNICAL DATA
Tig 4300i AC/DC
Mains voltage 400V, ±10%, 3∼ 50 Hz
Primary current
I
max
TIG
I
max
MMA
25 A
32 A
No--load powering the energy--saving mode,
6,5 min. after welding
75 W
Voltage/current range
TIG AC*/DC
MMA
4 -- 430 A
16 -- 430 A
Permissible load at TIG
40 % duty cycle
60 % duty cycle
100 % duty cycle
430 A / 27.2 V
400 A / 26.0 V
315 A / 22.6 V
Permissible load at MMA
40 % duty cycle
60 % duty cycle
100 % duty cycle
430 A / 37.2 V
400 A / 36.0 V
315 A / 32.6 V
Power factor at maximum current
TIG
MMA
0.89
0.89
GB
-- 1 8 --
bt32d1ea
Tig 4300i AC/DC
Efficiency at maximum current
TIG
MMA
76 %
80 %
Open --circuit voltage
MMA
83 V
Operating temperature range -- 1 0 t o + 4 0 ˚C
T ransportation temperature -- 2 5 t o + 5 5 ˚C
Continual sound pressure at no--load <70 db (A)
Dimensions, lxbxh 625 x 394 x 776
Weight 95 kg
Insulation class transformer H
Enclosure class IP 23
Application class
Cooling unit
Cooling power 2.0 kW at 40˚C temperature difference and flow
1. 0 l/min
Coolant 50 % water / 50% mono--ethylen glycol
Liquid quantity 5.5 l
Maximum water flow 2.0 l/min
*) The minimum current during AC welding depends on the alloy used for the aluminium plates and
their surface cleanliness.
Duty cycle
The duty cycle refers to the time as a percentage of a ten--minute period that you can weld at a cer-
tain load without overloading.
The duty cycle is valid for 40˚C ambient temperature.
Enclosure class
The IP code indicates the enclosure class, i. e. the degree of protection against penetration by solid
objects or water. Equipment marked IP23 is designed for indoor and outdoor use.
Application class
The symbol indicates that the power source is designed for use in areas with increased
electrical hazard.
5 I NSTALLATION
The installatio n must be executed b y a p rofession al.
WARNING!
This product is intended for industrial use. In a domestic environment this product may cause radio
interference. It is the user’ s responsibility to take adequate precautions.
GB
-- 1 9 --
bt32d1ea
5.1 Lifting instructions
With power source With power source and trolley
5.2 Placing
Position the welding power source such that its cooling air inlets and outlets are not
obstructed.
5.3 Mains power supply
Check that the unit is connected to the correct mains
power supply voltage, and that it is protected by the
correct fuse sizes. A protective earth connection must be
made, in accordance with regulations.
Rating plate with supply connection data.
Recommend ed fuse sizes an d minimum cable areas
Tig 4300i AC/DC TIG MMA
Mains voltage 400 V 3μ 50 Hz 400 V 3μ 50 Hz
Mains cable area, mm
2
4G4 4G4
Phase current, Ieffective 16.9 A 21.9 A
Fuse
Anti--surge
Type C MCB
16 A
20 A
20 A
25 A
Note! The mains cable areas and fuse sizes as shown above are in accordance with Swedish
regulations. Use the welding power source in accordance with the relevant national regulations.
GB
-- 2 0 --
bt32d1ea
6 OPERATION
General safety regulations for the handling of the equipment can be found on
page 15. Read through before you start using the equipment!
6.1 Connection and control devices
1 Connection for cooling water from the torch --
RED
9 Main power supply switch, 0 / 1 / STAR T
2 Connection with ELP*, for cooling water to the
torch -- BLUE
10 White indicating lamp -- Power supply ON
3 Cooling water filler 11 Orange indicating lamp -- Overheating
4 Connection for return cable (+) 12 Control panel
(see the respective instructions)
5 Connection for remote control 13 Connection for cooling water. Not used on
this model.
6 Connection for welding cable (--) or torch 14 Connection for cooling water. Not used on
this model.
7 Connection for start signal from the welding torch 15 Connection for gas hose.
8 Connection for gas to the TIG torch
*ELP = ESAB Logic Pump, see point 6.6.
AH 0871
GB
La pagina si sta caricando...
La pagina si sta caricando...
La pagina si sta caricando...
La pagina si sta caricando...
La pagina si sta caricando...
La pagina si sta caricando...
La pagina si sta caricando...
La pagina si sta caricando...
La pagina si sta caricando...
La pagina si sta caricando...
La pagina si sta caricando...
La pagina si sta caricando...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
ESAB Tig 4300i AC/DC Manuale utente
- Categoria
- Sistema di saldatura
- Tipo
- Manuale utente
in altre lingue
- English: ESAB Tig 4300i AC/DC User manual
Documenti correlati
-
ESAB Mig U4000i Manuale utente
-
ESAB Mig U5000i Manuale utente
-
ESAB Aristo®Mig U400 Manuale utente
-
ESAB Aristo®Mig U500 Manuale utente
-
ESAB Tig 4000i Manuale utente
-
ESAB Aristo®Tig 400 Manuale utente
-
-
-
-
ESAB Tig 2200i AC/DC - Caddy Tig 2200i AC/DC Manuale utente