Gigabyte P34 Manuale utente

Tipo
Manuale utente
Deutsch
Español
한국
Français
Indonesian
Italiano
P34
P34V7 1.0
English
1
English
PB
Congratulations on your purchase of the GIGABYTE Notebook.
This manual will help you to get started with setting up your notebook. The final product
conguration depends on the model at the point of your purchase. GIGABYTE reserves the
right to amend without prior notice. For more detailed information, please visit our website at
www.gigabyte.com
1 Connect the power cord to the AC adapter.
2 Connect the AC adapter to the DC-in jack on the right side of the notebook.
3 Connect the power cord to the power outlet.
Switching on the Power
After you turn on the Notebook for the very rst time, do not turn it off until the operating system
has been congured. Please note that the volume for the audio will not function until Windows
®
Setup has completed.
Booting Up the Notebook for the First Time
Depending on your conguration, the Microsoft
®
Windows
®
Boot Screen will be the rst screen that
you will see as the notebook starts up. Follow the on-screen prompts and instructions and enter
your personal information to complete the setup of the Windows
®
Operating System.
Using GIGABYTE Notebook for the First Time
1
2
3
IMPORTANT
•
Ensure that your Notebook PC is connected to a grounded power adapter before turning it on for the rst time.
•
When using your Notebook PC on power adapter mode, the socket outlet must be near to the unit and easily accessible.
•
Locate the input/output rating label on your Notebook PC and ensure that it matches the input/output rating information on your
power adapter. Some Notebook PC models may have multiple rating output currents based on the available SKU.
•
Power adapter information: Input voltage: 100-240Vac ,- Input frequency: 50-60Hz ,- Rating output voltage: 19.5V
English
3
English
2
Top View
Left View
1 Webcam Status LED Indicator
2 Webcam
3 Microphone
4 Power Button
5 TouchPad
6 Battery Indicator Button
7
LED Indicators
Press the right button of touchpad to
check the remaining battery power.
Right-click to show the remaining
power percentage. As shown below, the
battery life indicator is available when
the laptop is shut down, in stand-by or
hibernation.(Battery mode)
1
2
<10%
11-30%
31-50%
51-70%
71-90%
>90%
Bluetooth Status LED
Wireless Lan Status LED
HDD Status LED
Battery Status LED
Power Status LED
1 Kensington Lock Slot
2 Ethernet Port
3 D-sub (VGA) Port
4 USB 3.0 (Support USB Charge)
5 USB 3.1
6 Combo Audio Jack
Your GIGABYTE Notebook Tour
3 4 6
1
2 5
2
3 1
5
6
7
4
English
3
English
2
Base View
Right View
1 USB 3.0 x2
2 SD Card Reader
3 HDMI Port
4 DC-in Jack
1 Memory Compartment
2 3 4
1
1
Warning:
DO NOT remove the built-in lithium battery. For any service needs, please contact your local GIGABYTE
Authorized Service Center.
•
Do not install the Notebook PC on a slant or a place prone to vibrations, or avoid using the Notebook PC in that
location for a long time.This increases the risk that a malfunction or damage to the product will occur.
•
Do not store and use Notebook PC in direct sunlight or the location where temperatures exceed 112°F (45°C) such
as inside a vehicle.There is a danger of Lithium-ion battery expansion and aging.
•
Do not use the Notebook PC in a badly ventilated location such as on bedding, on a pillow or cushion, etc, and do
not use it in a location such as room with oor heating as it may cause the computer to overheat.Take care that the
Notebook PC vents (on the side or the bottom) are not blocked especially in these environments. If the vents are
blocked, it may be dangerous and cause the Notebook PC to overheat.
English
5
English
4
The computer employs hotkeys or key combinations to access most of the computer’s controls like
screen brightness and volume output. To activate hotkeys, press and hold the <Fn> key before
pressing the other key in the hotkey combination.
Hotkey Function Description
Fn+F1
Sleep Put the computer in Sleep mode.
Fn+F2
Wireless LAN Enables/disable the Wireless LAN function.
Fn+F3
Brightness Down Decrease the screen brightness.
Fn+F4
Brightness Up Increase the screen brightness.
Fn+F5
Display Toggle
Switche display output between the display
screen, external monitor (if connected) and both.
Fn+F6
Screen Display Toggle Turn the screen display on and off.
Fn+F7
Speaker Toggle Turn the speaker on and off.
Fn+F8
Volume Down Decrease the sound volume.
Fn+F9
Volume Up Increase the sound volume.
Fn+F10
Touchpad Toggle Turn the internal touchpad on and off.
Fn+F11
Bluetooth Enable/disable the Bluetooth function.
Fn+F12
Webcam Turn the internal webcam on and off.
Fn+Space
Keyboard Backlight
Toggle
Turn the keyboard backlight on and off.
Hotkeys
English
5
English
4
GIGABYTE Smart Manager
You can activate GIGABYTE Smart Manager by double clicking on the shortcut icon on the
desktop if the machine you purchased has the operation system built-in. GIGABYTE Smart
Manager is an icon-based control interface, enabling users to intuitionally access common
system setup as well as GIGABYTE exclusive utilities. Please be noted that the GIGABYTE
Smart Manager interface, icons, utilities and software versions may vary based on the
purchased models. Please operate GIGABYTE Smart Manager according to the actual version
built-in.
GIGABYTE Software Application
English
7
English
6
Smart USB Backup Guide
(Original: Recovery Image USB)
WARNING
You can backup original recovery image through this application in case of losing by device damage.
You can backup original recovery image to USB disk and restore the system if any storage system
replacement with the recovery USB disk.
Before you restore the system through the recovery USB disk, please make sure that you have already
made the backup of your data.
Please DO NOT shut down or un-plug the system when performing backup through recovery USB disk.
1
>20G
Please plug in the USB disk which is
at least 20GB in capacity to make the
original image (backup the data in USB
rst. All data will be eliminated during
the creation of recovery USB disk)
2
Insert the driver disk to your optical
drive and run the install of Smart USB
Backup” (for none-ODD model, please
use USB ODD device or download
from http://www.gigabyte.com
3
Run the Smart USB Backup” after
nishing the install.
4
Select your USB disk from the drop-
down list and start to create the
recovery USB disk.
5
The window will pop out when the creation of recovery disk is done.
Please press F12 on starting the system when you need to restore the system. Select
boot from recovery USB disk” and the system will be restored.
The time needed for restore will be around 30 mins(time needed may vary by USB disk
model) .
English
7
English
6
System Recovery (Restore your laptop operating system)
When something is going wrong with the laptop operating system, the storage of the laptop has
a hidden partition containing a full back up image of the operating system that can be used to
restore the system to factory default settings.
All ready to go
Make sure your PC is plugged in. This will take a few minutes.
Recovery Guide
Note
˙
If the storage has been switched or the partition deleted, the recovery option will no longer be
available and a recovery service will be needed.
˙
The recovery function is only available on devices with O/S preinstalled. Devices with DOS do not
have the recovery function.
Launch System Recovery
The system recovery feature is preinstalled before the laptop is shipped from the factory. The
option menu allows you to launch the Windows recovery tool to reinstall the operating system to
factory default.
The brief introduction below will show you how to start the recovery tool and restore your system.
Windows 10 Recovery Guide
During the laptop turn on process, press and hold F9
key to launch the tool.
2
1
3
Turn off and restart the laptop.
There are two options for system recovery
˙
Reset this PC
You can choose to keep or remove your files and then reinstalls Windows
without losing your les.
˙
GIGABYTE Smart Recovery
Your PC settings will be restored to factory default settings.
Caution: All personal data and les will be lost.
Choose Troubleshootto enter the recovery settings. (Also you can choose
“Continue” to exit recovery system and continue to Windows 10 for files or
data backup.)
English
9
English
8
4
▓▓▓
Choose “Reset this PC”
Keep my les
Choose an account to continue.All apps will be removed, and settings
will back to pure O/S (without GIGABYTE app), but your personal les
will be kept.
Remove everything
All apps, setting and personal les will be removed.
Just remove my les
Only personal data and les will be removed, but computer settings will
be kept.
Fully clean the drive
The drive will be completely restored to factory default settings. It takes
more time. > [Click on “Reset” to execute recovery function.]
Here are what will happen
˙
All of your personal les and apps will be removed.
˙
Your PC settings will be restored to pure O/S (without GIGABYTE app) .
▓▓▓
GIGABYTE Smart Recovery
Caution
˙
Once the “Recovery” is selected, your personal data and les will be deleted
after the laptop starts restoring, and the operating system will be reset to
factory default settings.
˙
A progress indicator bar will show on the window when the recovery process is
running. Please make sure the AC-adapter is plugged in and do not turn off the
laptop.
The recovery will be activated and you will see the
option buttons on the window. Click on “Yes” to start it.
After the system recovery is completed, you will see
the option button on the window, please click on
“Shutdown”.
English
9
English
8
Advanced options
System Restore
Use a restore point recorded on your PC to restore Windows.
System Image Recovery
Recover Windows using a specic system image le.
Startup Repair
Fix problems that keep Windows from loading.
Command Prompt
Use the Command Prompt for advanced trobleshooting.
UEFI Firmware Settings
Change settings in your PC’s UEFI rmware.
Startup Settings
Change Windows Startup behavior.
English
PB
English
10
Warranty & Service:
Warranty and service and related information please refer to the warranty card or GIGABYTE
service website as the below link:
http://www.gigabyte.com/support-downloads/technical-support.aspx
FAQ:
FAQ (Frequent Asked Questions) please refer to the below link:
http://www.gigabyte.com/support-downloads/faq.aspx
Appendix
PB
1
感謝您選擇技嘉筆記型電腦 !
為協助您順利使用技嘉筆記型電腦,我們特地設計此快速安裝說明。如果您需要更多關於電腦功能,
歡迎上技嘉官方網站 www.gigabyte.tw查詢。產品實際規格以出貨為準,如有異動恕不另行通知。
1 將電源線接上電源轉換器。
2 將電源轉換器連接到電腦的電源插孔。
3 將電源線插入電源插座。
開啟筆記型電腦
電源指示燈會顯示機器是否為通電的狀態。
第一次開機時,在還未完全進入作業系統前請勿強制關機。開啟電源後,直到該作業系統配置完成
前,音量無法設定。
開始第一次使用
根據您的筆記型電腦配置,當您第一次開機,第一個畫面會是微軟
Windows
®
啟動畫面,按照該螢幕上
的提示和指示,完成作業系統的配置。當軟體許可條款顯示時,請務必閱讀並同意後再繼續。
首次使用
GIGABYTE
技嘉筆記型電腦
1
2
3
重要
次啟動筆記型電腦之請先確認已經將電源變壓器連接至電腦
找出筆記型電腦的輸入/輸出頻率標籤並請確認符合電源變壓器上的輸入/輸出頻率資訊
當筆記型電腦在電源變壓器使用模式時請將電源變壓器靠近插座便於使
源變壓器資訊輸入100-240Vac 入頻50-60Hz ,輸出電壓功率19.5V
2
3
GIGABYTE
技嘉筆記型電腦導覽
上視圖
1
視訊指示燈
2
視訊攝影機
3
麥克風
4
電源開關
5
觸控板
6
電池電量顯示鍵 
7
LED 狀態指示燈 
下右鍵可檢視電池剩餘電量
在關機/
待命/休眠模式時按下右鍵可透過指示燈
號檢視電池剩餘電量(電量對照如下圖)
(電池模式下)
1
2
<10%
11-30%
31-50%
51-70%
71-90%
>90%
藍牙指示燈
無線網路指示燈
硬碟存取指示燈
電池充電指示燈
電源狀態指示燈
2
3 1
5
6
7
4
2 3 4
1
1 USB
 3.0
x2
2
SD記憶卡讀卡機
3 HDMI
4
電源插孔
右視圖
警語:使用過度恐傷害視力。
注意事項:
(1)使用30分鐘請休息10分鐘。
(2)2 歲以下幼兒不看螢幕, 2 歲以上每天看螢幕不要超過1小時。
2
3
左視圖
3 4 6
1
2 5
1
Kensington防盜鎖孔
2
乙太網路(LAN)埠
3
外接顯示器 (VGA) 埠
4
USB 3.0 (支援USB Charge 
 )
5
USB 3.1
6
耳機/麥克風複合插孔
1
記憶體槽
1
底視圖
警告:
本機器設備配備的鋰電池為不可拆卸裝置,請交由技嘉授權專業維修服務中心移除裝置中的電池。
USB Charge 支援在電腦關機、睡眠狀態或休眠狀態仍可進行充電您的可攜式USB裝置
    
(可於Gigabyte Smart Manager軟體內選擇開啟/關閉此項功能) 
請不於斜面上或容易震動的地方使用筆記型電腦低發生故障和產品損壞的風險
請勿置於車內室內外陽光強烈或高於45度C儲藏環, 以免鋰電池發老化或膨脹等危險
請於通風良好的地方使用此產品請勿在床上枕頭等通風不良的地方使用此產品並且不要在有樓板暖氣的地方使
避免導型電腦過請避側邊風孔阻塞如果通風孔阻塞有損害筆記型電腦或致內部
險。
4
5
許多電腦的設定例如螢幕亮度、喇叭音量等可利用電腦的快速鍵直接調整。
如需使用快速鍵,請依下表先按住 <Fn> 鍵,再按下<F1>~<F12>等按鍵。
快速鍵 功能 功能敘述
Fn+F1
睡眠模式 讓電腦進入睡眠模式。
Fn+F2
無線區域網路 開啟/關閉無線區域網路裝置。
Fn+F3
減弱亮度 降低螢幕亮度。
Fn+F4
增強亮度 提高螢幕亮度。
Fn+F5
螢幕顯示切換
在電腦螢幕以及外接式顯示器之間切換影像輸
出,或者同時顯示。
Fn+F6
螢幕開關 開啟/關閉螢幕。
Fn+F7
喇叭靜音 將喇叭切換為靜音模式。
Fn+F8
減弱音量 降低喇叭音量。
Fn+F9
增大音量 提高喇叭音量。
Fn+F10
觸控板開關 開啟/關閉觸控板。
Fn+F11
藍牙通訊 開啟/關閉藍牙通訊裝置。
Fn+F12
視訊攝影機 開啟/關閉內建視訊攝影機。
Fn+Space
鍵盤背光開關 開啟/關閉鍵盤背光。
快速鍵
4
5
(以下各軟體使用介面、圖示及功能可隨您購買的機種、軟體版本而有所變更。)
GIGABYTE Smart Manager
若您購買的電腦出貨已搭載
Windows
®
作業系統,你可
桌面上雙擊Smart Manager捷徑圖示
啟動GIGABYTE Smart Manager軟體,透過Smart Manager簡易的圖示介面,可以輕鬆校調系
統的相關設定。請注意Smart Manager使用介面、圖示及功能將隨您購買的機種、軟體版本而
有所變更,使用方式請依實際所搭載的Smart Manager版本操作。
GIGABYTE
技嘉專屬軟體
6
7
Smart USB Backup
使用說明
(原
Recovery Image USB
)
警告
為避免儲存裝置毀損導致原廠的還原映像檔遺失您可以透過此軟體來原廠的還原映像檔
如果您想更換新的存裝您可體將原原映像檔備份至 USB 身碟安裝好新的儲存裝
置後再將出廠的預設系統倒回新儲存裝置
使用本軟體所製作的還原 USB 隨身碟 將系統還原以前請先做好資料備免資料流失
利用還原 USB 隨身碟進行還原請勿移除或關掉電源
1
>20G
•
若要製作原廠映像檔的還USB隨身
入容 20GB  USB 
隨身碟 ( 請先將 USB 身碟裡原有的資
備份避免因下操作造成 USB 隨身
裡的資料遺 )
2
•
Smart 
USB Backup( 無建光碟機的機種
請外 USB光碟光碟內沒有
,請上 http://www.gigabyte.com
)。
3
•
完成執行桌面上的”Smart USB 
B a c k u p ”。
4
•
從清單中選取剛剛插入 USB 隨身碟
然後選擇建立還原 USB
5
•
跳出結束視窗後即完成
•
若要還原您的系統請在機時按 F12選擇用USB 隨身碟開機USB 隨身碟
統。
•
還原時間約需30 分鐘 ( 所需時間會因 USB 隨身碟種類而有所不 )
6
7
系統還原使用說明
系統還原(修復您的筆記型電腦作業系統)
當作統使用上出現不穩定的型電腦原廠出貨的置裡有一藏磁其內容為
作業系統的完整備份映像以用來救援系統將儲存裝置裡的作業系統還原到出廠預設
執行還原前請注意
確認筆記型電腦已接上外接電系統會花費幾分鐘的時間
注意
˙如果儲存裝置有被更換過或刪除該隱藏磁區還原功能將無法使用需送維修中心還
˙出廠規格為預搭作業系統時才有還原功能若是DOS 銷售則不提供此功能
啟動系統還原
系統原功能是筆記型電腦出廠時被預先安裝的該選項可 Windows 故障還工具新安
裝作為出設值
下為簡要介紹如何啟動還原工具並開始還原系統
Windows 10 系統還原說明
關機並重新啟動筆記型
2
1
3
啟動筆記型電腦後,按著 F9 按鍵幾秒鐘以啟動還原
工具。
系統還原有兩種方式可供選擇
˙ Reset this PC
如果電腦因軟體或設定值不佳而不穩定,您可以選擇移除或保留個人檔案,在
重設電腦設定值而不遺失個人檔案。
˙ GIGABYTE Smart Recovery
筆記型電腦的設定值會被還原成出廠預設
注意:將會遺失所有的個人資料與檔案。
選擇“Troubleshoot”進入系統還原及進階選項
您也以選擇“Continue直接進入Windows10作業系統先行備份個人資料
與檔案再作還原或選擇“Turn off your PC”關機並重新啟動筆記型電腦
8
9
注意事項
˙您所有的個人檔案與應用程式將會被移除。
˙所有的電腦設定值將會被還原成單純的 O/S ( 不含 GIGABYTE 應用程式 )。
Reset this PC - 重設電腦設定值

Keep my files - 保留個人檔案
選擇一個使用者帳戶後繼續所有應用程式會被移除設定值會還原成單純
O/S( GIGABYTE 應用程式 )但個檔案會被保留
Remove everything - 移除所有項
所有應用程定值

Just remove my files - 只移除個人檔案
案,值。
Fully clean the drive - 完整還原
完整還原儲存裝置至廠設定較長的還原時
> R e s e t 】。
4
注意事項
˙一選擇還原後,所有原本的個人資料與檔案將被刪除,並還原系統及儲存裝置至
出廠預設值。
˙還原視窗開啟並進行系統還原,在這之時請確認接上變壓器確保電力無虞,並請
勿關閉電源。
GIGABYTE Smart Recovery
進入重置系統模式,工具列會有還原選項,如您確定
要系統還原,點選“是”執行。
當系統還原完成後,工具列會有選項,請點選“關機”
8
9
Advanced options 其它或
定。
System Restore 系統還原
選擇系統原的記錄時間將系至該時間點
System Image Recovery 系統備份還原
使用前備份的系統備份資料還原Windows 系統
Startup Repair 啟動修復程序
復及解決Windows 系統問題
Command Prompt 令提示字元
使解。
UEFI Firmware SettingsUEFI BIOS 設定
重新啟動變更 UEFI BIOS 設定
Startup Settings 啟動設置
變更 Windows 動設定
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101

Gigabyte P34 Manuale utente

Tipo
Manuale utente