Gigaset AS690 IP Guida utente

Gigaset A690IP-AS690IP / LUG-IP IM-East en / A31008-M2813-R601-1-TE19 / Cover_front_c_IP.fm / 6/4/20

The most up-to-date user guide

can be found at

www.gigaset.com/manuals

A690IP - AS690IP

Template Module, Version 1.3, 11.04.2019,

Contents

Gigaset A690IP-AS690IP / LUG-IP IM-East en / A31008-M2813-R601-1-TE19 / LUGIVZ.fm / 6/4/20

2

Contents

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Package contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Base station . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Setting up an IP account . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Using the phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Switch the handset on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Lock/unlock the keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Control key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Menu navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Making calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Making a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Accepting a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Handsfree mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Muting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Making internal calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Network services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Call/message lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Call list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Message list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Local directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Online directories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Private online directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Gigaset.net directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Network mailbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Enabling/disabling a network mailbox / Entering a number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Playing messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Assigning key 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Additional functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Alarm clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Baby monitor (Room monitoring) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

ECO DECT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Blocking of unwanted calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

SMS (text messages) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Managing email messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Gigaset A690IP-AS690IP / LUG-IP IM-East en / A31008-M2813-R601-1-TE19 / LUGIVZ.fm / 6/4/20

Template Module, Version 1.3, 11.04.2019

Contents

3

Extending the functionality of the phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Multiple handsets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Repeater support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Operation with a PABX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Phone settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Date and time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Country and language (if available) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Tones and signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Web configurator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Start web configurator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Carry out initial configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Telephony . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Messaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Info Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Directories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Status of the phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Menu overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Customer Service & Assistance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Questions and answers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

Manufacturer‘s advice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

Authorisation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

Data protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

Contact with liquid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

Open Source Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

Character set tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

Menu tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

Licence texts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

Not all functions described in the user guide are available in all countries or from all

network providers.

Template Module, Version 1.2, 11.09.2018,

Overview

Gigaset A690IP-AS690IP / LUG-IP IM-East en / A31008-M2813-R601-1-TE19 / overview_IP.fm / 6/4/20

4

Overview

Setting the display language (p.12)

Handset

1 Status bar ( p. 18)

Icons display current settings and operating

status of the telephone

2Time (p.53)

3 Display keys and functions (p.17)

Various functions, depending on the operating

situation

2

6

7

8

9

10

11

4

12

Menu

5

3

1

12:05

4 Message key

Access to the call and message lists;

flashes: new message or new call

5 Talk key / Handsfree key

Accepting call; selecting

displayed number; open

redial list

¥ Press briefly

Start dialling

¥ Press and hold

6 End call key / On/Off key

End call; Cancel function;

one level back

¥ Press briefly

Back to idle mode, switch

handset on/off

¥ Press and hold

7 Control key ( p. 16)

Open menu; mute;

Open directory;

Adjust volume;

Make internal calls;

Navigate in menus and entry fields

8 Key 1

Call network mailbox

¥ Press and hold

9 Recall key

Consultation call (flash)

¥ Press and hold

10 Hash key / Lock key

Lock/unlock the keypad;

enter a dialling pause

¥ Press and hold

Toggle between upper/

lower case and digits

¥ Press briefly

11 Star key

Switching the ringtone on/

off

¥ Press and hold

Switch from pulse dialling to

tone dialling

¥ Press briefly

12 Microphone

If multiple functions are listed, the button

function depends on the situation.

The colour and shape of your device may be

different from the illustration.

Gigaset A690IP-AS690IP / LUG-IP IM-East en / A31008-M2813-R601-1-TE19 / overview_IP.fm / 6/4/20

Template Module, Version 1.2, 11.09.2018

Overview

5

Base

A Registration/paging key

Locate a handset (paging);

Show IP address on handset

Press briefly

Register a handset Press and

hold

Lights up: LAN connection active (phone is

connected to router)

Flashes: Base station in registration mode

The colour and shape of your device

may be different from the illustration.

A

Template Module, Version 1.2, 11.09.2018,

Overview

Gigaset A690IP-AS690IP / LUG-IP IM-East en / A31008-M2813-R601-1-TE19 / overview_IP.fm / 6/4/20

6

Symbols used in the user guide

Icons

Buttons

Procedures

Example: Enabling/disabling Auto Answer:

Warnings, the non-adherence to which can result in damage to devices or personal

injury.

Important information regarding function and appropriate handling or functions

that could generate costs.

Prerequisite for carrying out the following action.

Additional helpful information.

Talk/Handsfree key Hash key

End call key Star key

Control key Recall key

to Digit/letter keys Menu, OK Display keys

¤ Menu Settings OK Teleph ony OK Auto Answer OK

(=enabled)

Step Actions required

¤ Menu Press the Menu display key.

¤ Settings

¤ OK

Use the control key to navigate to entry Settings.

Press OK to confirm. The Settings submenu is opened.

¤ Telephony

¤ OK

Select the Tele ph ony entry using the control key .

Press OK to confirm. The Telepho ny submenu is opened.

¤ Auto Answer Select the Auto Answer entry using the control key .

¤ OK Enable or disable it using OK. Function is enabled .

Gigaset A690IP-AS690IP / LUG-IP IM-East en / A31008-M2813-R601-1-TE19 / security.fm / 6/4/20

Template Module, Version 1.3, 11.04.2019

Safety precautions

7

Safety precautions

Read the safety precautions and the user guide before use.

The device cannot be used in the event of a power failure. In case of a power failure it is also

not possible to make emergency calls.

If the LAN or Internet connection is down, functions that require an Internet connection are not

available, such as Internet telephony (VoIP), online directories and the Info Center. You are able to

make and receive calls if the phone is connected to an analogue landline.

Emergency numbers cannot be dialled if the keypad/display lock is activated!

Use only rechargeable batteries that correspond to the specification (see list of permitted

batteries www.gigaset.com/service

). Never use a conventional (non-rechargeable) battery or

other battery types as this could result in significant health risks and personal injury. Rechargeable

batteries, which are noticeably damaged, must be replaced.

The handset must not be operated if the battery cover is open.

Do not use the devices in environments with a potential explosion hazard (e.g. paint shops).

The devices are not splashproof. For this reason do not install them in a damp environment such

as bathrooms or shower rooms.

Use only the power adapter indicated on the device.

Whilst charging, the power socket must be easily accessible.

Use only the cables supplied for fixed line and LAN connection and connect these to the intended

ports only.

Remove faulty devices from use or have them repaired by our Service team, as these could inter-

fere with other wireless services.

Do not use the device if the display is cracked or broken. Broken glass or plastic can cause injury

to hands and face. Send the device to our Service department to be repaired.

Do not hold the rear of the handset to your ear when it is ringing or when speaker mode is acti-

vated. Otherwise you risk serious and permanent damage to your hearing.

The phone may cause interference in analogue hearing aids (humming or whistling) or cause

them to overload. If you require assistance, please contact the hearing aid supplier.

Keep small cells and batteries, which can be swallowed, out of the reach of children.

Swallowing a battery can lead to burns, perforation of soft tissue and death. Severe burns can

occur within 2 hours of swallowing.

In the case of a swallowed cell or battery, seek medical care immediately.

Using your telephone may affect nearby medical equipment. Be aware of the technical conditions

in your particular environment, e.g. doctor's surgery. If you use a medical device (e.g. a pace-

maker), please contact the device manufacturer. They will be able to advise you regarding the

susceptibility of the device to external sources of high frequency energy (for the specifications of

your Gigaset product see "Technical data").

Template Module, Version 1.3, 11.04.2019,

Getting started

Gigaset A690IP-AS690IP / LUG-IP IM-East en / A31008-M2813-R601-1-TE19 / starting_IP.fm / 6/4/20

8

Getting started

Package contents

• One base station, one power adapter for the base station, one phone cable, one LAN cable,

• One handset, two batteries, one battery cover, one charging cradle with power adapter

• One user guide

Base station

Connecting to the mains power supply

¤ Insert the power cable of the power

adapter into the upper connection

socket at the rear of the base station.

¤ Push both cables into the appropriate cable

channels .

¤ Insert the power adapter into the power

socket .

The base and charging cradle are designed for use in closed, dry rooms within a

temperature range of +5°C to +45°C.

Position the base on a level, non-slip surface at a central point in the flat or house. The

device's feet do not usually leave any marks on surfaces. However, due to the multi-

tude of different varnishes and polishes used on furniture, contact marks on the

surfaces cannot be completely ruled out.

Never expose the telephone to heat sources, direct sunlight or other electrical devices.

Protect your telephone from moisture, dust, corrosive liquids and vapours.

This device is only suitable for a maximum installation height of 2 m.

Only use the supplied network cable.

The network cable must always be connected in order to function, as the phone will

not operate without a power supply.

1

3

2

1

2

3

Gigaset A690IP-AS690IP / LUG-IP IM-East en / A31008-M2813-R601-1-TE19 / starting_IP.fm / 6/4/20

Template Module, Version 1.3, 11.04.2019

Getting started

9

Connecting the phone cable and connecting to the Internet

You establish a phone connection over the landline connection on the router or using a LAN

connector on the router depending on the contract with your phone provider.

You must connect the phone to the router for Internet telephony (VoIP), and access to the

Internet and home network.

¤ For the landline connection: Plug the phone cable into the socket and connect it to the

landline connector on your router .

¤ For Internet telephony and Internet connection: Connect one plug of the Ethernet cable

provided into the LAN socket on the side of the base . Insert the second jack of the

Ethernet cable into a LAN socket on the router .

¤ Push the cables into the cable channels provided.

As soon as the cable between the telephone and the router is

plugged in and the router is switched on, the key on the front of

the base station lights up (paging key).

You can now make calls over the landline or Internet, and you

can be called. The phone is connected to the Internet.

For the connection: a router connected to the Internet.

For Internet telephony: a broadband Internet connection (e.g. DSL) with a flat rate.

Only use the supplied phone cable. The pin connections on telephone cables may

vary.

1

3

2

4

1

2

3

4

Template Module, Version 1.3, 11.04.2019,

Getting started

Gigaset A690IP-AS690IP / LUG-IP IM-East en / A31008-M2813-R601-1-TE19 / starting_IP.fm / 6/4/20

10

Data protection notice

When the device is connected to the router, it will automatically contact the Gigaset Support Server. It will

send the following device-specific information daily:

• Serial number/item number

• MAC address

• Private IP address for the Gigaset in the LAN/its port numbers

• Device name

• Software version

On the support server, this information is linked to the existing device-specific information:

• Gigaset.net phone number

• System-related/device-specific passwords

Further information about the data stored in relation to the Gigaset.net Service can be found at:

www.gigaset.net/privacy-policy

Gigaset A690IP-AS690IP / LUG-IP IM-East en / A31008-M2813-R601-1-TE19 / starting_IP.fm / 6/4/20

Template Module, Version 1.3, 11.04.2019

Getting started

11

Handset

Connect the charging cradle

¤ Connect the flat plug of the power

adapter

¤ Plug the power adapter into the

socket

To remove the plug from the charging cradle

again:

¤ Press the release button .

¤ Pull out the plug .

Setting up the handset for use

The display is protected by a plastic film. Please remove the protective film.

Inserting the batteries

Charging the batteries

¤ Fully charge the batteries in the charging slot prior to

initial use.

The batteries are fully charged when the battery icon

disappears from the display.

Only use rechargeable batteries, as this could otherwise result in significant health

risks and personal injury. For example, the outer casing of the batteries could be

damaged beyond repair or the batteries could explode. The device could also

malfunction or be damaged as a result of using batteries that are not of the recom-

mended type.

¤ Insert the batteries with

the polarity in the right

direction (refer to the

picture for +/- positions).

¤ Fit the battery cover from

the top.

¤ Push the cover closed until

it clicks into place.

To re-open the battery cover:

¤ Grip the notch on the

cover and slide it down-

wards.

Batteries can heat up during the charge process. This is not dangerous.

Over time, the charging capacity of the batteries will decrease for technical reasons.

Handsets contained in the package have already been registered to the base. If a

handset has not been registered however, please register it manually ( p. 50).

1

2

3

4

1

2

3

4

4,5h

Template Module, Version 1.3, 11.04.2019,

Getting started

Gigaset A690IP-AS690IP / LUG-IP IM-East en / A31008-M2813-R601-1-TE19 / starting_IP.fm / 6/4/20

12

Changing the display language

You can change the display language, if the phone has been set to an incomprehensible

language.

¤ Menu Press the keys slowly in succession . . . the language set (e.g. English) is

displayed

¤ Select a different language: Press the control key until the language required is

selected on the display, e.g. Français OK ( = selected)

Setting date and time

Set the date/time so that the correct date and time can be assigned to incoming calls and to

enable the alarm to be used.

¤ Menu Settings OK Date and Time OK Enter the date (day, month and

year) in 8-digit format OK Enter the time (hours and minutes) in 4-digit format OK

(Display: Saved)

Moving the input position to the left or right:

Press the control key to the left/right

Gigaset A690IP-AS690IP / LUG-IP IM-East en / A31008-M2813-R601-1-TE19 / starting_IP.fm / 6/4/20

Template Module, Version 1.3, 11.04.2019

Getting started

13

Setting up an IP account

So that you are able to make calls via the Internet (VoIP), you must have at least one IP account

with an Internet telephony provider. You can register using the access details you receive from

your provider (user name, authentication name, password, etc.) or using an auto-configuration

code (activation code).

To register the phone with your provider, please use:

• The VoIP wizard on the handset

• Or the web configurator on a PC or tablet ( p. 62)

Registering using the VoIP wizard on the handset

¤ Press the Message key Yes . . . the wizard starts . . . scroll through the

displayed text OK

The display shows the first of the possible IP accounts (IP 1 to IP 6).

¤ Use to select the required account . . . Accounts already configured are marked with

OK ... Prompt Do you have auto conf code? is displayed

You can configure up to six IP accounts.

If the wizard does not start properly or you have terminated it: Start the VoIP wizard

using the handset menu

¤ Menu Settings OK Te le ph on y OK VoIP Wizard OK

If New firmware available. is shown on the display, there is a firmware update

available for your phone.

To update firmware: Yes ... the new firmware is loaded (takes approx. 6 mins.)

The Message key will then flash again.

¤ To start configuration: Press the Message key .

Registration using an authentication name and password:

¤ No

Registration using an activation code:

¤ Ye s

If no Internet connection can be established, a corresponding error message will be

generated. For more information, see "Questions and answers" Appendix

¤ Terminate the VoIP wizard: OK . . . The VoIP wizard will close Troubleshoot if

necessary Open the wizard again later via the menu to configure the IP account.

Template Module, Version 1.3, 11.04.2019,

Getting started

Gigaset A690IP-AS690IP / LUG-IP IM-East en / A31008-M2813-R601-1-TE19 / starting_IP.fm / 6/4/20

14

Registration using user data

The wizard establishes a connection to the Gigaset configuration server on the Internet. Various

profiles with general configuration data for different providers can be downloaded here.

Select provider

A list of countries is loaded.

¤ . . . Use to select the country in which you want to use the phone OK ... a list of

providers in this country is displayed . . . use to select provider OK ... the general

configuration data for your provider is downloaded and stored in the phone

Entering user data for your IP account

You are required to enter your personal access data for your IP account, e. g. Name, Password,

. . . (depending on the provider).

¤ Enter registration data confirm each entry using OK

Message on successful transfer: Your IP account is registered at your provider

Registration using an activation code

¤ . . . use to enter the auto configuration code (max. 32 characters) OK ... all data

required for IP telephony is loaded directly from the Internet onto your phone

Message on successful transfer: Your IP account is registered at your provider

The fixed line connection is assigned to the handsets as a send connection. Please change the

send connection to make calls over the Internet. For this, use the connection assistant (it is

started automatically) or the web configurator ( p. 64).

If your provider does not appear in the list:

Terminate the wizard: Press and hold the End call key . . . the handset returns to

idle status . . . set up the IP account using the web configurator ( p. 63)

Pay attention when entering access data, as it is case sensitive.

¤ To switch between lowercase, uppercase and number entry mode: Press the

key

¤ To delete incorrectly entered characters: Press the display key

¤ To navigate within an entry field: Press right/left on the control key

The configuration file is transferred via a secure connection (TLS authentication). If the

TLS authentication fails, the Message key flashes .

¤ . . . the message Certificate error - Please check your certificates in the Web

configurator. is displayed end display: press the right Display key

Further information on the error can be found on page Security of the web

configurator.

If the configuration file fails to download (e.g. because the configuration server is not

available), the phone keeps trying to establish a connection until the file is

downloaded successfully to the phone.

Gigaset A690IP-AS690IP / LUG-IP IM-East en / A31008-M2813-R601-1-TE19 / starting_IP.fm / 6/4/20

Template Module, Version 1.3, 11.04.2019

Getting started

15

Send and receive connections

Assign the available phone connections (fixed line network, Gigaset.net and up to six IP

connections) to the end devices as receive and, where necessary, send connections. End devices

are the registered handsets.

• Receive connection: Phone numbers you may be called on. Incoming calls are forwarded to

the end devices for which the relevant connection is assigned as receive connection.

• Send connection: A line that you use for an outgoing call. The corresponding number will be

transferred to the recipient. You can assign each end device a number or the associated

connection as a send connection.

Each connection (number) of your phone can be both a send as well as a receive connection and

can be assigned to several end devices.

Default assignment

• All configured connections are assigned to the handsets as receive connections on delivery.

• The fixed line network connection is assigned to the handsets as a send connection. If you

have no fixed line network connection, no send connection is assigned.

The connection assistant is started automatically.

Select handset

Connections for INT 1:

¤ Answer question Assign connect. to INT1? with Ye s

Connections for other handset :

¤ Answer question Assign connect. to INT1? with No . . . The handset with the next highest

number is offered

You can now change the default assignment one after the other for all registered handsets.

Changing the assignment

As soon as you have selected a handset, the receive connections assigned are displayed, e.g. IP1,

Fixed Line, Gigaset (for Gigaset.net).

¤ Use to scroll through the list

¤ Edit . . . The first receive connection is displayed Use Ye s or No to select (Ye s = Calls

to this connection are forwarded to the handset) Select the connection and configure

a setting

Once you have assigned all receive connections: Confirm the settings with OK

¤ Continue with OK . . . The send connection assigned is displayed.

¤ Edit Use to select the connection OK

Your phone is now ready for use.

Template Module, Version 1.3, 11.04.2019,

Using the phone

Gigaset A690IP-AS690IP / LUG-IP IM-East en / A31008-M2813-R601-1-TE19 / operating.fm / 6/4/20

16

Using the phone

Switch the handset on and off

If you place a deactivated handset into the charging slot, it will automatically activate itself.

Lock/unlock the keypad

The keypad lock prevents any accidental use of the phone.

Lock/unlock the keypad: Press and hold

Keypad lock enabled: The symbol is shown on the display

Control key

In the description below, the side of the control key is marked with an arrow (up, down, left,

right) that must be pressed in the different operating situations, e.g. for “press right on the

control key”.

Switching on:

¤ When the handset is switched off, press and hold the End call key

Switching off:

¤ When the handset is in idle mode, press and hold the End call key

If a call is indicated on the handset, the keypad automatically unlocks and you can

accept the call. It then locks again when the call is finished.

It is also not possible to call emergency numbers when keypad lock is enabled.

The control key enables you to navigate the menus and input fields, and also to call

up certain functions depending on the situation.

In idle mode During a conversation

Open the menu Mute the microphone

Select audio settings Adjust the loudspeaker volume for receiver

and handsfree mode

Open the directory Open the directory

Make internal call / Open list of handsets Initiate an internal consultation call

Gigaset A690IP-AS690IP / LUG-IP IM-East en / A31008-M2813-R601-1-TE19 / operating.fm / 6/4/20

Template Module, Version 1.3, 11.04.2019

Using the phone

17

Display

Display keys

The display keys perform a range of functions depending on the operating situation.

¤ Press the display key . . . Function shown in display above.

Changing the assignment of the right display key in idle mode

¤ Press and hold the right-hand display key . . . The list of possible key assignments is

opened Select function OK

Display functions accessed from the control key

Open the main menu / submenu

Confirm menu function / save entry

Back one menu level

Delete character by character to the left right

Access the call list / message list

Use

to scroll up/down and set the volume

Move the cursor left and right with

Current display key functions

Display keys

Menu

OK

Menu

OK

Menu

OK

Template Module, Version 1.3, 11.04.2019,

Using the phone

Gigaset A690IP-AS690IP / LUG-IP IM-East en / A31008-M2813-R601-1-TE19 / operating.fm / 6/4/20

18

Status bar

Icons display current settings and the status of the phone.

Radio contact between the base and handset

Battery charge level

Menu navigation

¤ When the phone is in idle, press the Display key Menu or the control key (right) . . . the

menu opens

¤ Use the control key to scroll to the function required Confirm with OK

The display automatically returns to idle mode after two minutes of inactivity.

Keypad lock activated

Ringtone deactivated

Good to poor

No reception

ECO DECT mode No Radiation enabled

0 - 10% 11 - 33% 34 - 66% > 66%

The symbol is shown at the front during the charge process.

Flashing Battery almost flat (less than 10 minutes of talk time)

The functions of your phone are displayed in a menu comprising several levels.

Menu tree: p. 82

Back one level:

¤ Press the key or briefly press the End call key

Return to idle:

¤ Press and hold the End call key

Gigaset A690IP-AS690IP / LUG-IP IM-East en / A31008-M2813-R601-1-TE19 / telephony_IP.fm / 6/4/20

Template Module, Version 1.3, 11.04.2019

Making calls

19

Making calls

Making a call

¤ Enter the number Press the Talk key . . . The number is dialled

To change the receiver volume during a call: Use

to set the volume

Ending a call / cancelling dialling: Press the End call key

The number is selected via the send connection (line) set for the handset. To use another line:

¤ Press and hold the Talk key Select the line Dial Enter the phone

number . . . The number is dialled about 3 seconds after the last digit is entered

Dialling from the directory

¤ Open the directory with Scroll to the required entry Press the Talk key

Or

¤ Open the directory with Enter the first letter of the name . . . The first entry

matching the input is displayed Scroll as needed to the entry required Press the Talk

key

Dial from a public directory or the Gigaset.net directory:

¤ Press and hold the Control key . . . The available public directories are displayed

Select the directory OK

Dialling from the redial list

The list contains the 10 numbers last dialled with the handset.

¤ Press briefly Select entry

Dialling from the call list

Open the call list: Press the Display key Call List OK

¤ Scroll to the required entry and press the Talk key

Dialling with speed dial key

¤ Press and hold the quick dial key to which the required number is assigned

Managing entries in the redial list

¤ Press briefly Select Menu Select function OK

Possible functions: Use Number / Copy to Directory / Delete Entry / Delete List

Entries from the directory are assigned to keys 2 to 9.

Template Module, Version 1.3, 11.04.2019,

Making calls

Gigaset A690IP-AS690IP / LUG-IP IM-East en / A31008-M2813-R601-1-TE19 / telephony_IP.fm / 6/4/20

20

Accepting a call

The handset indicates an incoming call by ringing and by a display on the screen.

¤ Press the Talk key

Function Auto Answer enabled: Simply take the handset out of the charging slot

Enabling function Auto Answer:

¤ Menu Settings OK Teleph ony OK Auto Answer OK

(=enabled)

Handsfree mode

In handsfree mode, you switch on the loudspeaker so that you can hear the caller without

holding the handset to your ear.

Enabling/disabling handsfree mode during a call and when listening to the answer machine:

¤ Press the handsfree key

Muting

¤ During a call, press the control key (right) . . . The handset microphone is switched off

One touch call

A predefined number is dialled by pressing any key. This allows children, who are unable to enter

a number, to call a certain number for example.

Enabling one touch call mode:

¤ Menu Call Manager OK One Touch Call OK Activation OK

Enter the number or use to take it from the directory OK (=enabled)

Make a one touch call:

¤ Press any key . . . the saved number is dialled

Cancel dialling:

¤ Press the End call key

End one touch call:

¤ Press and hold the key

Switch the ringtone off:

¤ Silence

Reject the call:

¤ Reject

Placing the handset in the charging cradle during a call:

¤ Press and hold down the Handsfree key Place the handset into the charging cradle

Adjusting the loudspeaker volume:

¤ Menu Audio Settings OK Call Volume OK Handsfree OK

Use to adjust the volume OK

La pagina sta caricando ...

Gigaset AS690 IP Guida utente

Questo manuale è adatto anche per

Gigaset AS690 IP Guida utente

in altre lingue

Documenti correlati

Altri documenti