BT BT4000 Big Button Manuale del proprietario

Marca: BT

Modello: BT4000 Big Button

Categoria: Segreterie telefoniche

Tipo: Manuale del proprietario

Designed to block nuisance calls

Quick Set-up and User Guide

BT4000

Big Button Cordless Phone

If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp

Important – please read ﬁrst2

• Only use the line cord, power supply and rechargeable batteries supplied with

your phone.

• Make sure that the power supply is connected to a known working socket.

• Connect your phone to the power supply and allow the batteries to charge for 24

hours before connecting the line cord to your telephone socket.

• To make sure you get the best range and reception from your handset, avoid

interference by placing the base unit away from large metal objects such as

fridge freezers and microwave ovens or electronic products such as computers

and TVs.

Inductive coupler

The BT4000 has an in-built inductive coupler for use with digital hearing aids.

If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp

Check box contents

ChargingPower / In use

Phone

Handset Base

Telephone line cord

(pre-installed)

Handset

Charger

Mains power adaptor

(item code 066270)

2 x AAA Ni-MH 550 mAh

rechargeable batteries

(already in handset)

Mains power adaptor

(item code 066270)

2 x AAA Ni-MH 550 mAh

rechargeable batteries

(already in handset)

Important

Only use the mains power adaptors, cables and rechargeable batteries supplied in this box or this

product might not work. Any replacement rechargeable batteries must be of the same type.

BT accepts no responsibility for damage caused to your BT4000 if you use any other type of batteries.

Contents for each additional handset (multipacks only)

If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp

Where to put your phone

• Place the base within

3 metres of a mains power

socket and 3 metres of a

phone socket so the cables

will reach.

• Make sure it’s at least a

metre away from other

electrical appliances to avoid

interference.

• Don’t place the phone or

base in a bathroom or other

humid area.

• The product works by

sending radio signals

between the handset and

base. The strength of the

signal depends on where you

position the base. Putting it

as high as possible can help

give you the best signal.

IMPORTANT

• Don’t connect the phone line

to a phone socket until the

handset is fully charged.

• The base station should

be plugged into the mains

power socket all the time.

1. Plug the mains

power adaptor

into the base.

2. Plug the other end

of the power adaptor

into the wall power

socket and switch on.

Quick set-up guide4

1 Plug in

The phone line cord is pre-installed but don’t

plug the other end into the wall socket yet.

Quick set-up guide 5

If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp

Talk/Standby time

Under ideal conditions, the

handset batteries should give

up to 16 hours talk time or

180 hours standby on a single

charge. (This doesn’t mean you

can unplug the base or leave

the handset for this length of

time without charge).

Please note that new Ni-MH

rechargeable batteries don’t reach

full capacity until they’ve been in

normal use for several days.

Battery Low warning

The

icon will ﬂash, you’ll

see the message

Battery

Low in the display and hear a

warning beep every minute,

to indicate that you need to

recharge your handset. You can

remove the display message by

selecting

Hide. If the battery

charge completely runs out,

the display will show

Charge

Batteries!. You must recharge

the handset batteries before

you can use the handset. If the

charge completely runs out the

handset will switch off. Place

the handset on the base or

charger to charge.

Quick set-up guide 5

2 Activate the batteries and

follow the Set-up wizard

1. Activate the batteries by pulling the plastic tab

away from the back of the handset.

Rechargeable batteries

already fitted

Remove this tab

and charge batteries

for 24 hours before use.

2. The Power on animation will start up and then the

handset will check for a link with the base station,

once found the screen will show

Set time and

date

. The set-up wizard will take you through the

steps for: setting the time and date, using Caller

Display, setting call blocking and adding contacts

to your phonebook.

Select

Yes by pressing the Left option button if you

want to follow the set-up wizard prompt or select

No by pressing the Right option button to continue

to the next prompt until set up is complete.

If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp

Quick set-up guide6

Battery performance

• To keep the batteries in the

best condition, leave the

handset off the base for a

few hours at a time.

• Running the batteries right

down at least once a week

will help them last as long as

possible.

• After charging your handset

for the ﬁrst time, subsequent

charging time for the

batteries is approximately

8 hours.

• The charge capacity of

rechargeable batteries will

go down over time, which

will reduce the talk and

standby time. Eventually

they’ll need replacing.

For details on how to get

replacement batteries, call

the helpline on 0800 145

6789*.

3. Once set-up is complete your handset will display

Please check line cord, place the handset on the

base to charge until step 4.

4. After 24 hours, plug the phone line cord into the

phone wall socket.

IMPORTANT

Charge the handset batteries for 24 hours or your

phone might not work.

Set up your additional handsets (multi packs only)

1. For additional handsets and chargers: plug the

mains power adaptor into the back of the charger

and plug the other end into the mains wall socket

and switch on the power.

Quick set-up guide 7

If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp

2. Activate the batteries as explained on page 5. If you

set the time and date on the ﬁrst handset then it

will be shared with all other handsets in your multi

pack once you activate the batteries.

3. Place the handset on the charger to charge for

24 hours.

If you ever need to remove the batteries, simply

slide open the battery compartment cover and ease

out the batteries.

3 Go!

Your BT4000 is now ready for you

to use

• For instructions on making a call, go to page 21.

• For help personalising your phone’s settings,

go to page 38.

Quick set-up guide

Using your BT4000

on a broadband line?

If so, you need to ﬁt an

ADSL microﬁlter between

the phone line cord and the

phone socket. You can get

BT ADSL microﬁlters from

bt.com/shop

If you use BT Inﬁnity you

will not need to use an ADSL

microﬁlter. For other types of

broadband, please check with

your provider if a microﬁlter

is required.

Quick set-up guide

Please note, other products

connected to the line are not

compatible with this feature

and will still ring.

You must subscribe to a Caller

Display service from your

network provider for the block

nuisance calls feature to work.

Charges may apply.

If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp

4 Block nuisance calls

The BT4000 can block calls from certain call types,

e.g. international calls or from speciﬁc numbers to

help prevent nuisance calls. You can store up to 10

speciﬁc blocked numbers.

1. Select

Menu, scroll to Call control and

press

OK.

2. Press

until Block calls is displayed and press

OK. You now have 2 choices:

i) To block calls by type, when

By call type is

displayed, press

OK. Press or to display

the call type you want:

Int. national, Withheld

numbers

, No Caller ID or Payphone and press

OK. Then press or to display Allowed or

Blocked and press OK to save.

If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp

If you cannot ﬁnd the answer

to your problem in this user

guide, then please call our free

Helpline on 0800 145 6789*.

Our dedicated advisors are

more likely to be able to help

you than the retailer where you

made your purchase.

Quick set-up guide 9

ii) To block calls by a speciﬁc number, press to

display

By number and press OK. You will enter the

block calls list, select

Add and enter the number you

want to block (or you can select

Options and select

a number from the phonebook or calls list) and

select

Save.

For more information on Call control settings,

go to page 26.

5 Help

Most problems can be ﬁxed with a few simple

checks, you may ﬁnd the answer in the Help

section on page 54 or see our online frequently

asked questions at bt.com/producthelp

Alternatively, call the Helpline on 0800 145 6789*

* Calls made from within the UK mainland network are free. Mobile and

international call costs may vary.

For more information and

general advice on handling

unwanted calls please go to

bt.com/unwantedcalls

If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp

10 In this guide

Getting to know your phone

Handset buttons ..............................14

Handset display/display icons ...........16

Finding your way around your phone 17

Menu map .......................................18

Base ................................................20

Using the phone

Switch the handset on or off .............21

Make an external call .......................21

Preparatory dialling .........................21

End a call.........................................21

Receive a call ...................................21

Call Waiting .....................................22

Mute ...............................................22

Incoming speech/Handsfree volume .23

Amplify ...........................................23

Make a handsfree call .......................23

Answer a call handsfree ....................24

Switch to handsfree during a call ......24

Redial .............................................24

Voicemail (1571) .............................24

Keypad lock .....................................25

Turn the handset ringer on or off .......25

Finding handset (Paging) .................25

Call control settings

Set-up Do not disturb ......................26

Block nuisance calls .........................26

Phonebook

Store a contact ................................28

Character map .................................29

If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp

In this guide 11

Assign a ringtone to a contact ...........29

View/dial a contact ..........................30

Edit a contact entry ..........................30

Delete a contact ..............................31

Delete all contacts ...........................31

View the contact memory status .......31

Speed dial

Save a speed dial entry .....................32

Dial a speed dial entry ......................32

Edit a speed dial entry ......................33

Delete a speed dial entry ..................33

Caller Display and the Calls list

Caller Display ...................................34

Calls list ...........................................34

Missed call notiﬁcation .....................35

View and access options in

the Calls list .....................................35

Save a Calls list entry to your contacts 36

Delete an entry in or the entire

Calls list ...........................................36

Settings

Set the handset ringtone for

external or internal calls ...................38

Set the handset ringer volume ..........38

Adjust the handset ringer tone .........39

Turn the handset tones on or off .......39

Change the handset display contrast .39

Turn the screensaver on or off ...........40

Change the handset name ................40

Change the call settings ...................40

Set the base ringtone melody ...........41

In this guide

If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp

Set the base ringer volume ...............41

Set a PBX access code ......................42

Change the system PIN.....................42

Reset the handset or base settings ....43

Clear the handset or base user data ...43

Clock/Alarm

Set the time format (12 or 24 hour) ..44

Set the time and date .......................44

Set an alarm ...................................45

Stopping the alarm when it goes off . . 45

BT Calling Features

Pre-stored numbers in the Calling

Features menu .................................46

Using Call Diversion ..........................46

Cancel Ringback ..............................47

Using Call Waiting ...........................47

Using Reminder call .........................48

Using Call barring .............................48

Using Anonymous call reject .............49

Using additional handsets

De-register a handset ......................51

Make an internal call

between handsets ............................52

Transfer a call ...................................52

Hold 3-way call ...............................53

Help ...............................................54

If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp

In this guide 13

General information

Safety information ...........................58

Cleaning ..........................................59

Environmental .................................59

How to recycle your equipment ........59

Guarantee .......................................60

Technical information .......................61

Connecting to a switchboard ............61

Recall (R) .........................................61

R&TTE .............................................61

Declaration of Conformance .............61

If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp

14 Getting to know your phone

Handset buttons

Left option button

In idle mode, press to enter the main menu.

Also use to access sub menus and conﬁrm options shown on the display above the button.

3.5mm Headset socket (on side of handset)

Up/Volume

From home screen, press to change the ringer volume, see page 38.

In talk mode, press to increase the incoming speech volume.

In menu mode, press to scroll up through the options.

Handsfree

In idle mode, press to make or receive calls handsfree, see page 23.

Talk

In idle mode, press to make and receive calls, see page 21.

Calls/Down

From home screen, press to open and scroll through the Calls list, see page 35.

In talk mode, press to decrease the incoming speech volume.

In menu mode, press to scroll down through the options.

1 (Speed dial)

From home screen, press and hold to dial BT 1571

or your stored speed dial number, see page 32.

Press and hold to turn the handset ringer on or off.

If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp

Getting to know your phone 15

Red LED Indicator

R (Recall)

R (Recall) for use with some BT Calling Features and when connected to a switchboard/PBX.

Right option button

Press to conﬁrm the option displayed on the screen above the button, to delete or go back

to the previous screen.

Amplify (on side of handset)

During a call, press to boost the incoming speech volume.

Phonebook

In idle mode, press to access your stored Contacts.

End call/on or off

Press to end a call.

In idle mode, press and hold to switch the handset on or off, see page 21.

In menu mode, press to return to home screen.

2-9 (Speed dial)

From home screen, press and hold buttons 2-9 to dial a stored speed dial number, see page 32.

Press and hold to lock or unlock the keypad.

Getting to know your phone

If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp

Handset display

Shows handset battery status.

Scrolls when the handset is charging.

Empty frame ﬂashes when battery needs recharging.

UnMute/Mute Indicates when Mute is on or off.

The keypad is locked.

Handset ringer is switched off.

Handset display icons

Handset name

* For full details of who has called you please make sure you have subscribed to Caller Display from your

network provider.

Time

Indicates the number of new

(missed) calls received*

If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp

Getting to know your phone 17

Finding your way around your phone

Your BT4000 has an easy to use menu system. Each menu has a list of options,

which you can see on the menu map on the next page.

When the handset is switched on and at the home screen:

1. Select

Menu by pressing the Left option button to open the main menu.

2. Use the

or button to scroll through the available menu options.

3. When the menu you want is displayed, select

OK by pressing the Left

option button.

4. Use the

or button to scroll through the available sub menu options.

When the sub menu you want is displayed, select

OK by pressing the Left option

button.

Select the

Back option if you want to return to the previous screen.

To exit a menu and return to the home screen, press

If no buttons are pressed for 30 seconds, the handset returns to the home

screen automatically.

Left option button

Press to select the

option displayed on the

screen above the button.

Right option button

Press to select the option

displayed on the screen above

the button.

Up and Down navigation buttons

Scroll up or down through the

menu options.

Getting to know your phone18

If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp

Call control Do not disturb On/Off

Block calls By call type

By number

Int. national

Withheld numbers

No Caller ID

Payphone

Allowed

Blocked

Clock/Alarm Alarm

(Off, On once, On daily, Monday to Friday, Saturday & Sunday)

Time & date Set time and Set Date

Time format 12 Hours or 24 Hours

Speed Dial List 1. 1571 2-9 Empty (Options or Add)

Calling Features Call diversion Divert all calls

Divert when busy

Divert if unanswered

(Set up diversion, Cancel diversion, Check diversion)

Cancel Ringback

Call waiting (Turn On, Turn Off, Check)

Reminder call (Set up reminder, Cancel reminder, Check reminder)

Call barring (Set up barring, Cancel barring, Check barring)

Anon call reject (Turn On, Turn Off, Check Status)

Menu map

Getting to know your phone 19

If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp

Settings Sounds

Handset name

Ringing External ringtone

Internal ringtone

Ringing volume

(Melody 1-15)

(Ringer Off or Level 1-5)

Tone adjustment Standard, Increase treble, Increase bass

Keypad tones

Conﬁrmation tone

Handset tones

Display Contrast (Level 1-5)

Screen saver (On or Off)

Call settings Auto answer

Auto end call

Auto join calls

First ring

(On or Off)

Base settings Ringing Ringtone Melody 1-5)

Ringing volume (Ringing Off or Level 1-5)

PBX code

Software version

Registration Register handset

Deregister HS

Change system PIN

Reset Handset settings

Base settings

Delete user data

Contacts menu

Accessed by pressing

the

button,

then Options

Add contact

Edit contact

Assign ringtone

Delete contact

Memory status

Del all contacts

Calls list Menu accessed by

pressing , then Options.

Save number

Delete call

Block number

Delete all calls

(On or Off)

(Tones on or Tones off)

If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp

Base

Find Phone

Press to ring all registered handsets,

helpful for ﬁnding a missing handset,

see page 25.

Also used during the registration

process, see page 50.

ChargingPower / In use

Phone

Power In use light

On when there is

power to the base.

Flashes when the line

is in use or registration is

taking place.

Red charging light

Battery charging light.

On when the handset is

in the base charging.

La pagina sta caricando ...

BT BT4000 Big Button Manuale del proprietario

Marca: BT

Modello: BT4000 Big Button

Categoria: Segreterie telefoniche

Tipo: Manuale del proprietario

Scarica il pdf

rapporto

in altre lingue

English: BT BT4000 Big Button Owner's manual

BT BT4000 Big Button Manuale del proprietario

BT BT4000 Big Button Manuale del proprietario

in altre lingue

Documenti correlati

Altri documenti