ProLights ECLIPSEFRESNELPTW Manuale utente
- Categoria
- Proiettori
- Tipo
- Manuale utente
USER MANUAL
MANUALE UTENTE
ECLIPSEFRESNELPTW
EN - IT
LED ELLIPSOIDAL
All rights reserved by Music & Lights S.r.l. No part of this instruction manual may be
reproduced in any form or by any means for any commercial use.
In order to improve the quality of products, Music&Lights S.r.l. reserves the right to modify the
characteristics stated in this instruction manual at any time and without prior notice.
All revisions and updates are available in the ‘manuals’ section on site www.musiclights.it
REV.01-09/18
1
ECLIPSEFRESNELPTW
Packing content
• ECLIPSEFRESNELPTW
• User manual
TABLE OF CONTENTS
Safety
General instructions
Warnings and installation precautions
1 Introduction
1. 1 Description and specications
1. 2 Operating elements and connections
2 Installation
2. 1 Mounting
3 Functions and settings
3. 1 Operation
3. 2 Basic
3. 3 Menu structure
3. 4 DMX mode
3. 5 DMX conguration
3. 6 Setting
3. 7 Channels DMX
3. 8 Fixture settings
Dimmer
Led frequency
Factory Reload
3. 9 Fixture Information
4 Maintenance
4. 1 Maintenance and cleaning the unit
4. 2 Trouble shooting
2
2
3
5
6
7
7
8
9
9
9
10
14
14
14
14
14
15
15
ECLIPSEFRESNELPTW
2
SAFETY
General instruction
• The products referred to in this manual conform to the European Community Directives and are there-
fore marked with .
• The unit is supplied with hazardous network voltage (230V~). Leave servicing to skilled personnel only.
Never make any modications on the unit not described in this instruction manual, otherwise you will
risk an electric shock.
• Connection must be made to a power supply system tted with ecient earthing (Class I appliance ac-
cording to standard EN 60598-1). It is, moreover, recommended to protect the supply lines of the units
from indirect contact and/or shorting to earth by using appropriately sized residual current devices.
• The connection to the main network of electric distribution must be carried out by a qualied electrical
installer. Check that the main frequency and voltage correspond to those for which the unit is designed
as given on the electrical data label.
• This unit is not for home use, only professional applications.
• Never use the xture under the following conditions:
- in places subject to vibrations or bumps;
- in places with a temperature of over 45 °C.
• Make certain that no inammable liquids, water or metal objects enter the xture.
• Do not dismantle or modify the xture.
• All work must always be carried out by qualied technical personnel. Contact the nearest sales point for
an inspection or contact the manufacturer directly.
• If the unit is to be put out of operation denitively, take it to a local recycling
plant for a disposal which is not harmful to the environment.
Warnings and installation precautions
• If this device will be operated in any way dierent to the one described in this manual, it may suer
damage and the guarantee becomes void. Furthermore, any other operation may lead to dangers like
short circuit, burns, electric shock, etc.
• Before starting any maintenance work or cleaning the projector, cut o power from the main supply.
• Always additionally secure the projector with the safety rope. When carrying out any work, always com-
ply scrupulously with all the regulations (particularly regarding safety) currently in force in the country
in which the xture’s being used.
• Install the xture in a well ventilated place.
• Keep any inammable material at a safe distance from the xture.
• Shields, lenses or ultraviolet screens shall be changed if they have become damaged to such an extent
that their eectiveness is impaired.
• The lamp (LED) shall be changed if it has become damaged or thermally deformed.
• Never look directly at the light beam. Please note that fast changes in lighting, e. g. ashing light, may
trigger epileptic seizures in photosensitive persons or persons with epilepsy.
• Do not touch the product’s housing when operating because it may be very hot.
WARNING! Before carrying out any operations with the unit, carefully read this instruction
manual and keep it with cure for future reference. It contains important information about
the installation, usage and maintenance of the unit.
3
ECLIPSEFRESNELPTW
- 1 - INTRODUCTION
1.1 DESCRIPTION AND TECHNICAL SPECIFICATIONS
ECLIPSEFRESNELPTW is an advanced LED replacement of traditional 1K Fresnel lamps,featuring 6 colour
mixing to deliver high precision reproduction of the White Spectrum from 2800 to 10000K with high CRI
and an extensive colour reproduction.
The optical system harnesses the power of a 260W custom LED with 6 colours to create an evenprojection,
beautiful colours and precise white, allowing the possibility to apply +/- green and magenta correction to
match other sources of light.
Featuring HD dimming andtuning from 2800Kto 10000K version, the ECLIPSEFRESNELPTW delivers the
performance and quality of output demanded from this level of luminaire.
LIGHT SOURCE
• Source: 260W 6 colour custom LEDs source (red, orange, green, royal blue, blue, lime)
• CT: 2800 - 10000K
• CRI: >95
• R9: >90
• Luminous ux: 7938lm
• Lux: (15°) 6517 lux - (45°) 930 luxlux @3m full
• Source life expectancy: >50.000 h
OPTICS
• Zoom: 15°~45° manual
• Field angle: 29°~67°
• Lens diameter: 8’’-200mm
• Lens type: Fresnel con zoom da 15° a 45°
• Focus: manual
COLOUR SYSTEM
• Colour mixing: Tunable White + Color
• CTC: plus/minus green and magenta correction
• White presets: 2800-10000K
• Colour wheel: virtual colour wheel with presets
DYNAMIC EFFECTS
• Static colour mode: selection of static colour
• Manual colour mode: manual adjustment of intensity, CT, colour correction from knob
• Auto mode: built-in programs with execution speed adjustment
• BODY
• Hardware on-board: lter frame, 8 doors barndoor, omega bracket spigot
• Pan angle: innite
• Tilt angle: innite
CONTROL
• Protocols: DMX512, RDM, Local knob
• DMX channels: 1/2/5ch1/5ch2/7/9/12/13/16/19channel
• Display: black OLED high resolution display
• Firmware upgrade: yes, via USB-DMX interface (UPBOX1) not included
• Other: 16bit control of dimmer and colour
ECLIPSEFRESNELPTW
4
Fig.1 - Technical drawingECLIPSEFRESNELPTW
ELECTRONICS
• Dimmer: linear 0~100% electronic dimmer
• Dimmer curves: 4 dierent dimming curves available
• Strobe / shutter: 1-30 Hz, electronic
• Operating temperature: -10° ~ +45°
• Flicker: icker free frequency with adjustable PWM
• Selectable PWM: 600~25K Hz
ELECTRICAL
• Power supply: 100-240V – 50/60Hz
• Power consumption (at 230V): 260W
• Power consumption (at 120V): 260W
• Output (at 230V): 11 units on a single power line
• Output (at 120V): 6 units on a single power line
PHYSICAL
• Cooling: forced air with low noise fan
• Suspension and xing: hanging bracket suitable for safe hanging and positioning
• Signal connection: XLR 5p IN/OUT connectors
• Power connection: powerCON TRUE1 IN/OUT
• IP rating: 30
• Dimensions (WxHxD): 341x545x343mm
• Weight: 9,2kg
341 343
429
116
ECLIPSEFRESNELPTW
6
55
11
3
4
2
7
10 11 12
9
8
14
13
15
Fig.2
5
ECLIPSEFRESNELPTW
1.2 OPERATING ELEMENTS AND CONNECTIONS
1. AIR OPENING
2. LOCKING KNOB for mounting bracket
3. MOUNTING BRACKET
4. TRACK-ADAPTER
5. HANDLE
6. CONTROL PANEL with display and 4 button
used to access the control panel functions
and manage them
7. FOCUS AND ZOOM ADJUSTING SCREW to
zoom the projected image clearly
8. MAIN FUSE HOLDER: replace a burnt-out fuse
by one of the same type only
9. POWER IN (PowerCON IN): for connection to a
socket (100-240V~/50-60Hz) via the supplied
mains cable.
10. DMX IN (5-pole XLR): 1 = ground, 2 = DMX-, 3
= DMX+, 4 N/C, 5 N/C
11. DMX OUT (5-pole XLR): 1 = ground, 2 = DMX-,
3 = DMX+, 4 N/C, 5 N/C
12. POWER OUT (PowerCON OUT): power output
for connection of multiple units in series.
13. YELLOW POLE OPERATOR: Zoom pole
operator.
14. WHITE POLE OPERATOR: Tilt pole operator.
15. BLUE POLE OPERATOR: Pan pole operator
Fig.4
ECLIPSEFRESNELPTW
6
- 2 - INSTALLATION
2.1 MOUNTING
ECLIPSEFRESNELPTW is designed for applications in exhibition areas, commercial spaces, museums, res-
taurant, churches, and any other installation where size is an important factor. For xing, stable mounting
clips are required. The mounting place must be of sucient stability and be able to support a weight of
10 times of the unit’s weight.
When carrying out any installation, always comply scrupulously with all the regulations (particularly re-
garding safety) currently in force in the country in which the xture’s being used.
• Install the projector at a suitable location.
• Always additionally secure the projector with the safety rope from falling down. For this purpose, fas-
ten the safety rope at a suitable position so that the maximum fall of the projector will be 20 cm. The
adjust the projector and use the knobs.
NOTE - For the installation of the ECLIPSEFRESNELPTWDY make sure that the ridge of the adaptor is in
with the groove of the track. Turn knobs 90° to connect the adaptor to the circuit. Please see the gure 4.
7
ECLIPSEFRESNELPTW
- 3 - FUNCTIONS AND SETTINGS
3.1 OPERATION
To turn on the ECLIPSEFRESNELPTW connect the supplied main cable to a socket (100-240 VAC-50/60 Hz).
Then the unit is ready for operation. You can also adjust the dimmer and zoom using the knobs.
To switch o, disconnect the mains plug from the socket. For a more convenient operation it is recom-
mended to connect the unit to a socket which can be switched on and o via a light switch.
NOTE - To operate the projector ECLIPSEFRESNELPTW you need a system track. The track system must
be installed and maintained by a suitably qualied person in compliance with latest construction and
relevant legislation. It is the responsibility of the installer to ensure the electrical, mechanical and thermal
compatibility of the track system and the ttings. The connection to the main network of electric distribu-
tion must be carried out by a qualied electrical installer.
ATTENTION - Mains voltage must be switched o before mounting; maintenance; insert and replace
Adaptors; spots and luminaires.
3.2 BASIC
Access control panel functions using the four panel buttons located directly underneath the LED Display
(g.5).
MENU UP DOWN ENTER
Used to access the menu or
to return a previous menu
option
Navigates downwards through
the menu list and increases
the numeric value when in a
function
Navigates upwards through
the menu list and decreases
the numeric value when in
a function
Used to select and store the
current menu or conrm the
current function value or
option within a menu
Fig.5- Functions of the buttons
MENU
1 CONNECT
ð
DMX Address
ð
Value (001-512)
DMX Mode
ð
1CH 3200K (Amber Shift always On)
2CH
ð
Amber Shift on (3200K)
ð
Color Temperature (2800 -
10000 K) (NO Amber Shift)
ð
Customization
(Red <000-255>,
Orange <000-255>,
Green <000-255>,
Royal Blue <000-255>,
Blue <000-255>,
Lime <000-255>)
5CH1
5CH2
7CH
9CH
12CH
13CH
16CH
19CH
2 SETUP
ð
Screen
ð
Back Light
ð
On
10S
20S
30S
ð
Flip Display
ð
NO-Yes
ð
Key Lock
ð
NO-Yes
3 ADVANCED
ð
Dimmer Mode
ð
O
Dimmer 1
Dimmer 2
Dimmer 3
White Balance
ð
O
ð
Adjust
ð
Red <125-255>
Orange <125-255>
Green <125-255>
Royal Blue <125-255>
Blue <125-255>
Lime <125-255>
Led Frequency
ð
600Hz
1200 Hz
2000 Hz
4000 Hz
6000Hz
25kHZ
Fan Mode
ð
Auto
On
Factory Reload
ð
NO-Yes
4 INFORMATION
ð
Fixture TIme
ð
0-9999
Version
ð
V1.0
UID
ð
15D00217****
5 KNOB MODE
ð
Color temperature
ð
DIM (0~255);
HUE (-0.25~+0.25);
CTO (2800~10000 K)
DIMMER
PLUS MINUS GREEN
COLOR TEMPERATURE
Color Macro
ð
DIM (0~255);
HUE (0~255);
SAT (0~255)
DIMMER
COLOR
SATURATION
ECLIPSEFRESNELPTW
8
3.3 MENU STRUCTURE
9
ECLIPSEFRESNELPTW
3.4 DMX MODE
• Press the button MENU so many times until the display shows DMX ADDRESS, and press the button ENTER
to conrm.
• Press UP/DOWN button to select the desired value (001-512). Press and hold to scroll quickly.
• Press ENTER button to store.
• Press the MENU button to go back or to meet the waiting time to exit the setup menu.
To able to operate the ECLIPSEFRESNELPTW with a light controller, adjust the DMX start address for the
rst a DMX channel. If e. g. address 33 on the controller is provided for controlling the function of the rst
DMX channel, adjust the start address 33 on the ECLIPSEFRESNELPTW. The other functions of the light
eect panel are then automatically assigned to the following addresses.
An example with the start address 33 is shown below:
3.5 DMX CONFIGURATION
ECLIPSEFRESNELPTW is equipped with dierent DMX conguration.
• Press the button MENU so many times until shows DMX CHANNEL, and press the button ENTER to conrm.
• Select the desired DMX conguration (1CH - 2CH - 5CH1 - 5CH2 - 7CH - 9CH - 12CH - 13CH -16CH - 19CH) through the
buttons UP/DOWN.
The tables on page 14 indicate the operating mode and DMX value.
3.6 SETTINGS
You can change the parameters for the device by following these steps:
SCREEN
You can change the following parameters related to the display, following the same procedure:
• Press the ENTER button to access the main menu.
• Press the UP / DOWN keys to scroll the menu, select the Set Up icon, then press the ENTER button to
enter the next menu.
• Press UP / DOWN to scroll through the menu, then select Screen, and press the ENTER button to enter
the next menu.
• Press UP / DOWN to scroll through the menu, and then select one of the following settings for the dis-
play and press the ENTER key to display it.
- Back Light - Backlight display Auto O. This feature allows you to automatically turn o the backlight
after a specied time that you can set using the arrow buttons. To have the display always on select
Always On or choose another value to turn o the display after the amount of time you choose.
- Flip Display - Orientation of the display. This function allows you to rotate the display 180° to get a
better view of the display when the unit is hanging upside down. Select YES to activate or NO to dis-
able this function.
- Key Lock - Lock keys. With this function, you can lock the buttons on the control panel. If this function
is activated, the keys are automatically locked. To disable or temporarily disable the key lock func-
tion, press the buttons in the following order to regain access to menu commands: UP, DOWN, LEFT,
RIGHT, ENTER. Select YES to activate or NO to disable.
• Press the ENTER button to conrm your choice.
• Press the LEFT button repeatedly to exit the menu and save changes.
Numero
canali DMX
Indirizzo di
start (esempio)
Indirizzo DMX
occupati
Prossimo indirizzo di start
possibile per unità n°1
Prossimo indirizzo di start
possibile per unità n°2
Prossimo indirizzo di start
possibile per unità n°3
5 33 33 - 37 38 43 48
1 CANALI
MODE
FUNCTION DMX
Value
1 Ch
1
DIMMER
0~100% 000 - 255
2 CANALI
MODE
FUNCTION DMX
Value
2 Ch
1
DIMMER
0~100% 000 - 255
2
DIMMER SPEED MODE
Preset dimmer speed from display menu
Dimmer speed mode o
Dimmer speed mode1 (fast speed)
Dimmer speed mode2 (middle speed)
Dimmer speed mode3 (slow speed)
000 - 051
052 - 101
102 - 152
153 - 203
204 - 255
5 CANALI
MODE
FUNCTION DMX
Value
5 Ch1
1
DIMMER
0~100% 000 - 255
2
CTO
2800K - 3000K
3000K - 3200K
3200K - 3400K
3400K - 3600K
3600K - 3800K
3800K - 4000K
4000K - 4200K
4200K - 4400K
4400K - 4600K
4600K - 4800K
4800K - 5000K
5000K - 5200K
5200K - 5400K
5400K - 5600K
5600K - 5800K
5800K - 6000K
6000K - 6200K
6200K - 6400K
6400K - 6600K
6600K - 6800K
6800K - 7000K
7000K - 7200K
7200K - 7400K
7400K - 7600K
7600K - 7800K
7800K - 8000K
8000K - 8200K
8200K - 8400K
8400K - 8600K
8600K - 8800K
8800K - 9000K
9000K - 9200K
9200K - 9400K
9400K - 9600K
9600K - 9800K
9800K - 10000K
000 - 010
010 - 017
017 - 024
024 - 031
031 - 038
038 - 045
045 - 052
052 - 059
059 - 066
066 - 073
073 - 080
080 - 087
087 - 094
094 - 101
101 - 108
108 - 115
115 - 122
122 - 129
129 - 136
136 - 143
143 - 150
150 - 157
157 - 164
164 - 171
171 - 178
178 - 185
185 - 192
192 - 199
199 - 206
206 - 213
213 - 220
220 - 227
227 - 234
234 - 241
241 - 249
249 - 255
3
HUE
0
-25°~25°
000 - 000
001 - 255
4
COLOR MACRO
No Function
Amber Shift on
Color Macro
000 - 002
003 - 005
006 - 255
5
DIMMER SPEED MODE
Preset dimmer speed from display menu
Dimmer speed mode o
Dimmer speed mode1 (fast speed)
Dimmer speed mode2 (middle speed)
Dimmer speed mode3 (slow speed)
000 - 051
052 - 101
102 - 152
153 - 203
204 - 255
ECLIPSEFRESNELPTW
10
3.7 CHANNELS DMX
7 CANALI
MODE
FUNCTION DMX
Value
7 Ch
1 RED 000 - 255
2 ORANGE 000 - 255
3 GREEN 000 - 255
4 ROYAL BLUE 000 - 255
5 BLUE 000 - 255
6 LIME 000 - 255
7
DIMMER SPEED MODE
Preset dimmer speed from display menu
Dimmer speed mode o
Dimmer speed mode1 (fast speed)
Dimmer speed mode2 (middle speed)
Dimmer speed mode3 (slow speed)
000 - 051
052 - 101
102 - 152
153 - 203
204 - 255
9 CANALI
MODE
FUNCTION DMX
Value
9 Ch
1 DIMMER 000 - 255
2 RED 000 - 255
3 ORANGE 000 - 255
4 GREEN 000 - 255
5 ROYAL BLUE 000 - 255
6 BLUE 000 - 255
7 LIME 000 - 255
8
STROBE
No Function
Strobe slow to fast
000 - 010
011 - 255
9
DIMMER SPEED MODE
Preset dimmer speed from display menu
Dimmer speed mode o
Dimmer speed mode1 (fast speed)
Dimmer speed mode2 (middle speed)
Dimmer speed mode3 (slow speed)
000 - 051
052 - 101
102 - 152
153 - 203
204 - 255
5 CANALI
MODE
FUNCTION DMX
Value
5 Ch2
1
DIMMER
0~100% 000 - 255
2
DIMMER FINE
0~100% 000 - 255
3
CTO
2800K - 3000K
3000K - 3200K
3200K - 3400K
3400K - 3600K
3600K - 3800K
3800K - 4000K
4000K - 4200K
4200K - 4400K
4400K - 4600K
4600K - 4800K
4800K - 5000K
5000K - 5200K
5200K - 5400K
5400K - 5600K
5600K - 5800K
5800K - 6000K
6000K - 6200K
6200K - 6400K
6400K - 6600K
6600K - 6800K
6800K - 7000K
7000K - 7200K
7200K - 7400K
7400K - 7600K
7600K - 7800K
7800K - 8000K
8000K - 8200K
8200K - 8400K
8400K - 8600K
8600K - 8800K
8800K - 9000K
9000K - 9200K
9200K - 9400K
9400K - 9600K
9600K - 9800K
9800K - 10000K
000 - 010
010 - 017
017 - 024
024 - 031
031 - 038
038 - 045
045 - 052
052 - 059
059 - 066
066 - 073
073 - 080
080 - 087
087 - 094
094 - 101
101 - 108
108 - 115
115 - 122
122 - 129
129 - 136
136 - 143
143 - 150
150 - 157
157 - 164
164 - 171
171 - 178
178 - 185
185 - 192
192 - 199
199 - 206
206 - 213
213 - 220
220 - 227
227 - 234
234 - 241
241 - 249
249 - 255
4
COLOR MACRO
No Function
Amber Shift on
Color Macro
000 - 002
003 - 005
006 - 255
5
DIMMER SPEED MODE
Preset dimmer speed from display menu
Dimmer speed mode o
Dimmer speed mode1 (fast speed)
Dimmer speed mode2 (middle speed)
Dimmer speed mode3 (slow speed)
000 - 051
052 - 101
102 - 152
153 - 203
204 - 255
11
ECLIPSEFRESNELPTW
12 CANALI
MODE
FUNCTION DMX
Value
12 Ch
1
DIMMER
0~100% 000 - 255
2
STROBE
No Function
Strobe slow to fast
000 - 010
011 - 255
3 RED 000 - 255
4 ORANGE 000 - 255
5 GREEN 000 - 255
6 ROYAL BLUE 000 - 255
7 BLUE 000 - 255
8 LIME 000 - 255
9
CTO
2800K - 3000K
3000K - 3200K
3200K - 3400K
3400K - 3600K
3600K - 3800K
3800K - 4000K
4000K - 4200K
4200K - 4400K
4400K - 4600K
4600K - 4800K
4800K - 5000K
5000K - 5200K
5200K - 5400K
5400K - 5600K
5600K - 5800K
5800K - 6000K
6000K - 6200K
6200K - 6400K
6400K - 6600K
6600K - 6800K
6800K - 7000K
7000K - 7200K
7200K - 7400K
7400K - 7600K
7600K - 7800K
7800K - 8000K
8000K - 8200K
8200K - 8400K
8400K - 8600K
8600K - 8800K
8800K - 9000K
9000K - 9200K
9200K - 9400K
9400K - 9600K
9600K - 9800K
9800K - 10000K
No Function
000 - 010
010 - 017
017 - 024
024 - 031
031 - 038
038 - 045
045 - 052
052 - 059
059 - 066
066 - 073
073 - 080
080 - 087
087 - 094
094 - 101
101 - 108
108 - 115
115 - 122
122 - 129
129 - 136
136 - 143
143 - 150
150 - 157
157 - 164
164 - 171
171 - 178
178 - 185
185 - 192
192 - 199
199 - 206
206 - 213
213 - 220
220 - 227
227 - 234
234 - 241
241 - 249
249 - 252
253 - 255
12 CANALI
MODE
FUNCTION DMX
Value
12 Ch
10
HUE
0
-25°~25°
000 - 000
001 - 255
11
COLOR MACRO
No Function
Amber Shift on
Color Macro
000 - 002
003 - 005
006 - 255
12
DIMMER SPEED MODE
Preset dimmer speed from display menu
Dimmer speed mode o
Dimmer speed mode1 (fast speed)
Dimmer speed mode2 (middle speed)
Dimmer speed mode3 (slow speed)
000 - 051
052 - 101
102 - 152
153 - 203
204 - 255
13 CANALI
MODE
FUNCTION DMX
Value
13 Ch
1 RED 000 - 255
2 RED FINE 000 - 255
3 ORANGE 000 - 255
4 ORANGE FINE 000 - 255
5 GREEN 000 - 255
6 GREEN FINE 000 - 255
7 ROYAL BLUE 000 - 255
8 ROYAL BLUE FINE 000 - 255
9 BLUE 000 - 255
10 BLUE FINE 000 - 255
11 LIME 000 - 255
12 LIME FINE 000 - 255
13
DIMMER SPEED MODE
Preset dimmer speed from display menu
Dimmer speed mode o
Dimmer speed mode1 (fast speed)
Dimmer speed mode2 (middle speed)
Dimmer speed mode3 (slow speed)
000 - 051
052 - 101
102 - 152
153 - 203
204 - 255
ECLIPSEFRESNELPTW
12
19 CANALI
MODE
FUNCTION DMX
Value
19 Ch
1 DIMMER 000 - 255
2 DIMMER FINE 000 - 255
3 RED 000 - 255
4 RED FINE 000 - 255
5 ORANGE 000 - 255
6 ORANGE FINE 000 - 255
7 GREEN 000 - 255
8 GREEN FINE 000 - 255
9 ROYAL BLUE 000 - 255
10 ROYAL BLUE FINE 000 - 255
11 BLUE 000 - 255
12 BLUE FINE 000 - 255
16 CANALI
MODE
FUNCTION DMX
Value
16 Ch
1 DIMMER 000 - 255
2 DIMMER FINE 000 - 255
3 RED 000 - 255
4 RED FINE 000 - 255
5 ORANGE 000 - 255
6 ORANGE FINE 000 - 255
7 GREEN 000 - 255
8 GREEN FINE 000 - 255
9 ROYAL BLUE 000 - 255
10 ROYAL BLUE FINE 000 - 255
11 BLUE 000 - 255
12 BLUE FINE 000 - 255
13 LIME 000 - 255
14 LIME FINE 000 - 255
15
STROBE
No Function
Strobe slow to fast
000 - 010
011 - 255
16
DIMMER SPEED MODE
Preset dimmer speed from display menu
Dimmer speed mode o
Dimmer speed mode1 (fast speed)
Dimmer speed mode2 (middle speed)
Dimmer speed mode3 (slow speed)
000 - 051
052 - 101
102 - 152
153 - 203
204 - 255
19 CANALI
MODE
FUNCTION DMX
Value
19 Ch
13 LIME 000 - 255
14 LIME FINE 000 - 255
15
STROBE
No Function
Strobe slow to fast
000 - 010
011 - 255
16
CTO
2800K - 3000K
3000K - 3200K
3200K - 3400K
3400K - 3600K
3600K - 3800K
3800K - 4000K
4000K - 4200K
4200K - 4400K
4400K - 4600K
4600K - 4800K
4800K - 5000K
5000K - 5200K
5200K - 5400K
5400K - 5600K
5600K - 5800K
5800K - 6000K
6000K - 6200K
6200K - 6400K
6400K - 6600K
6600K - 6800K
6800K - 7000K
7000K - 7200K
7200K - 7400K
7400K - 7600K
7600K - 7800K
7800K - 8000K
8000K - 8200K
8200K - 8400K
8400K - 8600K
8600K - 8800K
8800K - 9000K
9000K - 9200K
9200K - 9400K
9400K - 9600K
9600K - 9800K
9800K - 10000K
No Function
000 - 010
010 - 017
017 - 024
024 - 031
031 - 038
038 - 045
045 - 052
052 - 059
059 - 066
066 - 073
073 - 080
080 - 087
087 - 094
094 - 101
101 - 108
108 - 115
115 - 122
122 - 129
129 - 136
136 - 143
143 - 150
150 - 157
157 - 164
164 - 171
171 - 178
178 - 185
185 - 192
192 - 199
199 - 206
206 - 213
213 - 220
220 - 227
227 - 234
234 - 241
241 - 249
249 - 252
253 - 255
17
HUE
0
-25°~25°
000 - 000
001 - 255
18
COLOR MACRO
No Function
Amber Shift on
Color Macro
000 - 002
003 - 005
006 - 255
19
DIMMER SPEED MODE
Preset dimmer speed from display menu
Dimmer speed mode o
Dimmer speed mode1 (fast speed)
Dimmer speed mode2 (middle speed)
Dimmer speed mode3 (slow speed)
000 - 051
052 - 101
102 - 152
153 - 203
204 - 255
13
ECLIPSEFRESNELPTW
ECLIPSEFRESNELPTW
14
3. 8 FIXTURE SETTINGS
It is possible to change the parameter value in the following way:
DIMMER
• Enter in Dimmer mode to select specic dimming curve, press the button MENU so many times until
shows DIM MODE, and press the button ENTER to conrm.
• Press the button UP/DOWN to select OFF - DIM1 - DIM2 - DIM3.
• Press ENTER button to store.
• Press the MENU button to go back or to meet the waiting time to exit the setup menu.
WHITE CALIBRATION
• Press the button MENU then press the button UP/DOWN so many times until show WHITE CALIBRATION.
Press the button ENTER to conrm.
• Select the color Red, Orange, Green, Royal Blue, Blue, Lime through the buttons UP/DOWN. Press the button
ENTER to conrm.
• Set the value (125 - 255), using the buttons UP/DOWN.
• Continue until the desired setting is obtained.
• Press the MENU button to go back or to meet the waiting time to exit the setup menu.
LED FREQUENCY
• To adjust the frequency of the LEDs, press the MENU button repeatedly until the display shows LED
Frequency, and then press the ENTER button.
• Select the frequency (600Hz - 1200Hz - 2000Hz - 4000Hz - 6000Hz - 25kHz) using the UP/DOWN buttons.
• To conrm, press the ENTER key.
• Press the MENU button to go back or wait a few seconds to exit the setup menu.
FACTORY RELOAD
Selezionare questa funzione per ripristinare l’unità alle impostazioni di fabbrica:
• To activate Reset Factory display press the button MENU so many times until shows Factory Reload,
and press the button ENTER to conrm.
• Press ENTER button to conrm the selection.
• Press the MENU button to go back or to meet the waiting time to exit from the setup menu automati-
cally.
3. 9 FIXTURE INFORMATION
To view all the information on the device, proceed as follows:
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the icon Information, then press the ENTER but-
ton to enter the next menu.
• Press the UP/DOWN button to scroll through the menu, then select one of the following information
and press the ENTER button to display it.
- Fixture Time - Through the Fixture Time function you can display the operating time of the projector.
- Software Version - Through Version function you can display the currently installed software version.
• Press the LEFT button repeatedly to exit the menu.
15
ECLIPSEFRESNELPTW
- 4 - MAINTENANCE
4.1 MAINTENANCE AND CLEANING THE UNIT
• Make sure the area below the installation place is free from unwanted persons during setup.
• Switch o the unit, unplug the main cable and wait until the unit has cooled down.
• All screws used for installing the device and any of its parts should be tightly fastened and should not
be corroded.
• Housings, xations and installation spots (ceiling, trusses, suspensions) should be totally free from any
deformation.
• The main cables must be in impeccable condition and should be replaced immediately even when a
small problem is detected.
• It is recommended to clean the front at regular intervals, from impurities caused by dust, smoke, or
other particles to ensure that the light is radiated at maximum brightness. For cleaning, disconnect the
main plug from the socket. Use a soft, clean cloth moistened with a mild detergent. Then carefully wipe
the part dry. For cleaning other housing parts use only a soft, clean cloth. Never use a liquid, it might
penetrate the unit and cause damage to it.
4.2 TROUBLESHOOTING
Problems Possible causes Checks and remedies
Fixture does not light up
• No mains supply
• Dimmer fader set to 0
• Faulty LED
• Check the power supply voltage
• Increase the value of the dimmer channels
• Replace the LED board
General low light intensity
• Dirty lens assembly
• Misaligned lens assembly
• Clean the xture regularly
• Install lens assembly properly
Fixture does not power up
• No power
• Loose or damaged power cord
• Check for power on power outlet
• Check power cord
Contact an authorized service center in case of technical problems or not reported in the table can not be
resolved by the procedure given in the table.
Music & Lights S.r.l. si riserva ogni diritto di elaborazione in qualsiasi forma delle presenti istruzioni per l’uso.
La riproduzione - anche parziale - per propri scopi commerciali è vietata.
Al ne di migliorare la qualità dei prodotti, la Music&Lights S.r.l. si riserva la facoltà di modicare, in
qualunque momento e senza preavviso, le speciche menzionate nel presente manuale di istruzioni.
Tutte le revisioni e gli aggiornamenti sono disponibili nella sezione 'Manuali' sul sito www.musiclights.it
3
ECLIPSEFRESNELPTW
• ECLIPSEFRESNELPTW
• Manuale utente
Contenuto dell'imballo:
INDICE
Sicurezza
Avvertenze generali
Attenzioni e precauzioni per l’installazione
1 Introduzione
1. 1 Descrizione e speciche tecniche
1. 2 Elementi di comando e di collegamento
2 Installazione
2. 1 Montaggio
3 Funzioni e impostazioni
3. 1 Funzionamento
3. 2 Impostazione base
3. 3 Struttura menù
3. 4 Modalità DMX
3. 5 Congurazione canali
3. 6 Impostazioni del proiettore
3. 7 Canali DMX
3. 8 Funzioni del dispositivo
Dimmer
Bilanciamento Bianco
Frequenza led
Factory Reload
3. 9 Informazioni sul dispositivo
4 Manutenzione
4. 1 Manutenzione e pulizia del sistema ottico
4. 2 Risoluzione dei problemi
4
4
5
7
8
9
9
10
11
11
12
11
16
16
16
16
16
16
17
17
ECLIPSEFRESNELPTW
4
ATTENZIONE! Prima di effettuare qualsiasi operazione con l’unità, leggere con attenzione
questo manuale e conservarlo accuratamente per riferimenti futuri. Contiene informazioni
importanti riguardo l’installazione, l’uso e la manutenzione dell’unità.
SICUREZZA
Avvertenze generali
• I prodotti a cui questo manuale si riferisce sono conformi alle Direttive della Comunità Europea e per-
tanto recano la sigla .
• Il dispositivo funziona con pericolosa tensione di rete 230V~. Non intervenire mai al suo interno al di
fuori delle operazioni descritte nel presente manuale; esiste il pericolo di una scarica elettrica.
• È obbligatorio eettuare il collegamento ad un impianto di alimentazione dotato di un’eciente messa
a terra (apparecchio di Classe I secondo norma EN 60598-1). Si raccomanda, inoltre, di proteggere le
linee di alimentazione delle unità dai contatti indiretti e/o cortocircuiti verso massa tramite l’uso di
interruttori dierenziali opportunamente dimensionati.
• Le operazioni di collegamento alla rete di distribuzione dell’energia elettrica devono essere eettuate
da un installatore elettrico qualicato. Vericare che frequenza e tensione della rete corrispondono alla
frequenza ed alla tensione per cui l’unità è predisposta, indicate sulla targhetta dei dati elettrici.
• L’unità non per uso domestico, solo per uso professionale.
• Evitare di utilizzare l’unità:
- in luoghi soggetti a vibrazioni, o a possibili urti;
- in luoghi a temperatura superiore ai 45°C.
• Evitare che nell’unità penetrino liquidi inammabili, acqua o oggetti metallici.
• Non smontare e non apportare modiche all’unità.
• Tutti gli interventi devono essere sempre e solo eettuati da personale tecnico qualicato. Rivolgersi al
più vicino centro di assistenza tecnica autorizzato.
• Se si desidera eliminare il dispositivo denitivamente, consegnarlo
per lo smaltimento ad un’istituzione locale per il riciclaggio.
Attenzioni e precauzioni per l’installazione
• Se il dispositivo dovesse trovarsi ad operare in condizioni dierenti da quelle descritte nel presente
manuale, potrebbero vericarsi dei danni; in tal caso la garanzia verrebbe a decadere. Inoltre, ogni altra
operazione potrebbe provocare cortocircuiti, incendi, scosse elettriche, rotture etc.
• Prima di iniziare qualsiasi operazione di manutenzione o pulizia sull’unità togliere la tensione dalla rete
di alimentazione.
• È assolutamente necessario proteggere l’unità per mezzo di una fune di sicurezza. Nell’eseguire qual-
siasi intervento attenersi scrupolosamente a tutte le normative (in materia di sicurezza) vigenti nel
paese di utilizzo.
• Installare l’unità in un luogo ben ventilato.
• Mantenere i materiali inammabili ad una distanza di sicurezza dall’unità.
• I ltri, le lenti o gli schermi ultravioletti se danneggiati possono limitare la loro ecienza.
• I LED devono essere sostituiti se danneggiati o termicamente deformati.
• Non guardare direttamente il fascio luminoso. Tenete presente che i veloci cambi di luce possono pro-
vocare attacchi d’epilessia presso persone fotosensibili o epilettiche.
• Non toccare l’alloggiamento del prodotto quando è in funzione perché potrebbe essere molto caldo.
La pagina si sta caricando...
La pagina si sta caricando...
La pagina si sta caricando...
La pagina si sta caricando...
La pagina si sta caricando...
La pagina si sta caricando...
La pagina si sta caricando...
La pagina si sta caricando...
La pagina si sta caricando...
La pagina si sta caricando...
La pagina si sta caricando...
La pagina si sta caricando...
La pagina si sta caricando...
La pagina si sta caricando...
La pagina si sta caricando...
La pagina si sta caricando...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
