1. Radio On Indicator
2. AC Socket
3. Battery Compartment Door.
4. Handle
5. Rod Antenna
6. Dial Scale
7. Tuning Knob
8. Band Switch
9. Phone Jack
10. Volume Knob / On/Off knob
11. Speaker
12. AUX In Jack
CONTROL AND THEIR FUNCTIONS
9
3
1
8
6
5
2
10
7
11
4
12
POWER SOURCE
BATTERY POWER OPERATION
1. Open the battery compartment door by pushing the catches downwards.
2. Install 4 x UM2 batteries carefully as indicated in battery compartment.
3. Close the battery compartment.
AC POWER OPERATION
Connect receptacle end of the mains lead to the AC socket and the plug to an AC outlet.
OPERATION
1. Turn the Volume Knob / On/Off knob clockwise until you listen a click sound, the
radio will be turn on.
The Radio On Indicator will light on.
2. Select the desired radio band with the Band Switch.
3. Tune in a desired station by tuning the Tuning Knob.
4. For FM reception, pull out the antenna and adjust the direction, lenght and angle to
give the best reception.
5. Adjust the Volume Knob / On/Off knob for your desired listening level.
6. To turn off the radio, turn the Volume Knob / On/Off knob anti-clockwise until you
listen a click sound.
The Radio On Indicator will light off.
PHONE JACK
For private listening connect an headphone (not included) with a 3.5mm plug to the Phone
Jack. The built-in speaker will be automatically disconnected.
Teac PR300 (NZ).p65 2008/7/29, ¤U¤È 04:283