I
WARRANTY PROCEDURE
Please read the owner’s manual carefully and ensure that you have followed the correct installation and operating
procedures.
1. Please read this warranty card.
2. Keep your purchase receipt to enable you to proceed quickly in the event of a Warranty Service.
3. If you require Warranty Service, please contact the TEAC Customer Support Hotline at 1300 553 315 for
assistance. Please ensure that you have the model number, serial number and purchase receipt ready when
you call.
Please complete the section below and keep this information for your own records.
Owner’s Name
Owner’s Address
Postcode
Model Name/No. Serial No.
Dealer’s Name
Dealer’s Address
Postcode
Authorised Service Centres in Major Australian Cities
NSW
151 Arthur Street
Homebush West, NSW 2140
Queensland
Unit 1, 320 Curtin Ave West
Eagle Farm, QLD 4009
Western Australia
Unit 2, 50 Pilbara Street
Welshpool, WA 6106
South Australia
11 McInnes Street
Ridleyton, SA 5008
Victoria
282 Normanby Road
South Melbourne, VIC 3205
Thank you for selecting a TEAC product
.
If you should require assistance with your product regarding its setup
or operation, or if you believe it is faulty, please first call us at the
TEAC Customer Support Hotline
1300 553 315
teacservicesupport@awa.com.au
www.teac.com.au
In many cases, our Hotline has been able to solve
before returning the product to the store where you purchased it.
suspected faults over the phone.
II
WARRANTY INFORMATION
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are
entitled to a replacement or refund for a major failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail
to be of acceptable quality and the failure does not amount to a major failure.
Warranty Terms & Conditions
1. TEAC warrants that this product is free from defects in material and workmanship under normal domestic use with
reasonable care and skill. Maintenance and cleaning (i.e. laser head) is not covered by this warranty. The TEAC
warranty only applies to TEAC products purchased, used and serviced in Australia.
2. The benefits to the consumer given by this Warranty are in addition to other rights and remedies of the consumer
under a law in relation to goods or services to which the warranty relates, being the Australian Consumer Law.
3. Refund or replacement via your retailer is available for a period of 14 days after purchase for goods that have been
inspected and determined to have a major failure. Refund and exchange is not applicable for change of mind.
4. Subject to the terms herein, this warranty effectively covers the equipment as specified in the Warranty Periods
Table below from the date of purchase.
TEAC PRODUCT
WARRANTY PERIOD
LED/LCD TV 42” (106 cm) and above
1 Year (In-Home Service/ Pick up Available)*
LED/LCD TV 32” (80 cm) and above
1 Year (Carry-in Service)
All other TEAC products
1 Year (Carry-in Service)
5.
This service will only be provided as part of this warranty if all the following conditions are met;
In Home Service/Pick up* Service
a) The product is indicated in the Warranty Period Table.
b) The product is within the warranty period.
c) The product is located within the normal service area of the local TEAC Authorised Service Centre.
If TEAC determines that the product is not repairable on site, TEAC can complete the repair by taking the product to
a TEAC Authorised Service Centre.
Where In-Home service/Pick up* is not available, the purchaser is required to send the product to the nearest TEAC
Authorised Service Centre for repair. In this event, proof of purchase is required to support a warranty claim. After
the repair, the product will be available for collection by or return to the purchaser at a fee upon request. TEAC in-
home service can be made available at a fee upon request.
Carry-in Service
6. A 12-month replacement warranty is applicable to all Accessories such as Remote, Power Adaptors and Cables.
7. TEAC will ensure to the best of its abilities that all required parts are made available for any required service/repair.
8. TEAC Australia Pty Ltd and its Authorised Service Centres will use their best endeavours to complete product
repairs within a reasonable period based on available resources and workload during the time when service is
requested and performed.
9. Refurbished parts may be used to repair the product. In the case of a replacement, the product may be replaced,
with a refurbished unit of the same type or, if one is unavailable, a similar refurbished model with equal or better
features & specifications.
10. Please be advised that if the product presented for repair is capable of retaining user-generated data, the data may
be lost during servicing. Customers are strongly encouraged to back up all important information/data before
sending the product in for service/repair.
11. Service will be provided only during normal business hours and under safety conditions and circumstances. TEAC
and its authorised service agents can refuse any repair if safety, in relation to OH&S, becomes a concern to its staff
or authorised service agents’ personnel.
III
12. The warranty is void and warranty claims may be refused, subject to the Australian Consumer Law, if:
a) The product was not transported, installed, operated or maintained according to manufacturer instruction, or
b) The product was abused, damaged, tampered, altered or repaired by any unauthorised persons, or
c) Product failure is due to accidents during use, installation or transit, power surges, use of defective or
incompatible external devices, exposure to abnormal conditions such as excessive temperatures or humidity, or
entry of liquids, objects or creatures into the product.
13. No one is authorised to assume any liability on behalf of TEAC or impose any obligation on it, in connection with the
sale of any equipment other than as stated in this warranty and outlined above.
14. TEAC reserves the right to inspect and verify whether the product is exhibiting a major failure as claimed by
customers/retailers.
15. LCD dead pixel policy, please contact TEAC Customer Support Hotline on 1300 553 315 for assistance.
1
SAFETY PRECAUTIONS
This is a delicate electronic unit;
* The apparatus should not be exposed to dripping or splashing and that no objects filled with liquids, such
as vases, should be placed on the apparatus.
* A minimum distance of 5cm should be left around the apparatus for sufficient ventilation.
* No naked flame sources such as lighted candles should be placed on the apparatus.
* When replacing the battery, be sure to dispose of the old one in accordance with the current regulations.
To this end, deposit it at a point which has been provided for this purpose, so that it will be disposed of in
a safe and environmentally friendly way.
* The apparatus can be used normally between 10 to 40°C.
* To prevent fire or shock hazard, do not expose this appliance to rain or moisture.
* The ventilation should not be impeded by covering the ventilation openings with items, such as
newspapers, tablecloths, curtains, etc.
WARNINGS
* To make sure that there is no power to the unit, please remove and disconnect the AC power plug from
the AC wall power output.
* The main plug should not be obstructed AND should be easily accessible during use.
* If the external flexible cable or cord of this device is damaged, it should be replaced only by the
manufacturer, an authorized service agent or similar qualified personnel in order to avoid a hazard.
* This apparatus should be used in moderate climates.
ATTENTION
To reduce the risk of electric shock, do not remove the cover. There are no
user serviceable parts inside the unit. Refer all servicing to qualified
personnel.
The lightning flash with arrowhead symbol within the triangle is a warning
sign alerting the user of “dangerous voltage” inside the unit.
The exclamation point within the triangle is a warning sign alerting the user of
important instructions accompanying the products.
WARNING
To reduce the risk of fire or electric shock, do not expose this appliance to
rain or moisture.
* The marking information is located at the back of the apparatus.
* Battery should not be exposed to excessive heat.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Teac SB04T (AUST).p65 2011/4/14, ¤W¤È 10:415
3D
+
2
3
8
1
4
87
3
1
5
4
2
Right Side Remote ControlFront side
CONTROL AND INPUT :
CONNECTING THE UNIT
AC POWER
Insert the AC power plug correctly into a power outlet. The Red LED will light up and the unit is now in
Standby mode.
LINE IN JACK
Please make sure that the power is off when connecting and disconnecting.
Use the provided AUDIO CORD, connect the 3.5mm plug into the line in socket of the unit (on the right
side of the unit). Connect the RED and WHITE plug into the line out socket of the audio source.
Note : Please note that this is not a magnetically shielded speaker, do not place near to a CRT TV, as this
may cause discolouration.
INSTALLATION OF THE REMOTE CONTORL
CHANGING THE REMOTE BATTERY
1. Slide the BATTERY COMPARTMENT DOOR out of the remote.
2. Install 1 x "CR2025" battery or an equivalent battery.
3. Slide the BATTERY COMPARTMENT DOOR back into the remote.
CAUTION : Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent
type.
USING THE REMOTE CONTROL
This remote control makes it easy to control the unit from a distance of up to 3m away. You need to point it
at the remote sensor on the front panel of the unit.
OPERATION
1. Press the ON / STANDBY Button and the GREEN LED will light up.
2. Turn on the power of the audio source (e.g. TV, DVD player) and play audio on the device.
3. Press the Volume Up Button to increase the volume output level.
4. Press the Volume Down Button to decrease the volume output level.
5. Press the 3D Button to turn on the 3D sound effect. Press once more to turn off the 3D sound effect.
6. Press the MUTE Button (on the remote control only) to mute the sound.
7. Press the ON / STANDBY Button and the LED will change to RED. The unit is now in Standby Mode.
1. Volume Up Button
2. Volume Down Button
3. 3D Button
4. ON / Standby Button
5. Line In Socket
6. Mute Button (on remote control only)
7. ON / Standby LED Indicator
8. Remote Sensor
2
Teac SB04T (AUST).p65 2011/4/14, ¤W¤È 10:416
2 x Wall mount brackets
Wall
3
MOUNTING UNIT ON A WALL
Please make sure that the main AC power is turned off and unplug before attempting to mount the unit.
Use only the supplied wall mounting brackets. Secure the 2 wall mounting brackets to a wall that can
support the weight of the unit. For best performance, mount the unit directly below the TV.
SPECIFICATIONS
Power Source : AC240V ~ 50Hz
1 x 3V, CR2025 Lithium battery (for remote control)
Dimensions : 700(L) x 85(W) x 105(H) MM
Weight : 2.3 KGS
Specifications is subject to change without prior notice.
Weight and dimensions are approximate.
HOW ?
Teac Customer
Care Centre
Teac SB04T (AUST).p65 2011/4/14, ¤W¤È 10:427
Teac SB04T (AUST).p65 2011/4/7, ¤U¤È 05:038
TEAC CUSTOMER SUPPORT HOTLINE (TCS)
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
in altre lingue
- English: TEAC SB04T User manual
Documenti correlati
-
TEAC PR301 Manuale utente
-
-
-
-
-
-
-
Tascam CD-400U Manuale utente
-
-