WARRANTY PROCEDURE
v1.1: Mar 2014
Please read the owner’s manual carefully and ensure that you have followed the correct installation and operating procedures.
1. Please read this warranty card.
2. Keep your purchase receipt to enable you to proceed quickly in the event of a Warranty Service.
3. If you require Warranty Service, please contact the TEAC Warranty Service Hotline at 1300 553 315 for assistance. Please ensure
that you have the model number, serial number and purchase receipt ready when you call.
Please complete the section below and keep this information for your own records.
Owner’s Name
Owner’s Address
Postcode
Model Name/No. Serial No.
Dealer’s Name
Dealer’s Address
Postcode
Thank you for selecting a TEAC product.
If your TEAC product malfunctions, please call us directly for warranty support
between Monday to Friday at 8.30AM – 6PM AEST at the
TEAC Warranty Service Hotline
1300 553 315
For other enquiries, please contact us at:
www.teac.com.au
When calling to receive warranty service, please have:
1. Your model and serial number
2. Proof of purchase
3. And your product in front of you
NOTE:
- You are required to provide a copy of your receipt in order to have your claim processed.
- You can check whether your product is entitled to a 3-year warranty on www.teac.com.au
- Please read the Terms and Conditions for details of your warranty entitlement.
TERMS AND CONDITIONS
v1.1: Mar 2014
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a
replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You
are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not
amount to a major failure.
1. TEAC warrants that this product is free from defects in material and workmanship under normal domestic use with reasonable care and skill.
Maintenance and cleaning (i.e. laser head) is not covered by this warranty. The TEAC warranty only applies to 2014 TEAC products
purchased NEW from a TEAC Authorised Retailer in Australia. This warranty only applies to the original purchaser and cannot be transferred.
2. The benefits to the consumer given by this Warranty are in addition to other rights and remedies of the consumer under a law in relation to
goods or services to which the warranty relates, being the Australian Consumer Law.
3. Refund or replacement via your TEAC Authorised Retailer is available for a period of 14 days after purchase for goods that have been
inspected and determined to have a major failure. Refund and exchange is not applicable for change of mind.
4. Subject to the terms herein, this warranty effectively covers TEAC product models released in 2014, excluding products purchased for
commercial purposes, as specified in the Warranty Periods Table below from the date of purchase. TEAC models released before 2014 shall
be covered under TEAC Warranty v1.5.2 (DEC 2011). Commercial use products are covered for 12 months only (Authorised Service Centre).
TEAC PRODUCT
excluding commercial use products
SIZE (TV)
WARRANTY PERIOD
from date of purchase
WARRANTY SERVICE TYPE
LED/LCD TV
(Without built in Blu-ray / DVD player)
42” and above
0 to 12 months
In-home service*
13 to 36 months
Authorised Service Centre Service
32” to 40”
36 months
Authorised Service Centre Service
Below 32”
12 months
Authorised Service Centre Service
LED/LCD TV
(With built in Blu-ray / DVD player)
42” and above
12 months
In-home service*
19” to 40”
12 months
Authorised Service Centre Service
All other TEAC products
N/A
12 months
Authorised Service Centre Service
Please refer to www.teac.com.au for verification of 2014 models.
5. In Home Service/Pick up* Service
This service will only be provided as part of this warranty if all the following conditions are met;
a) The product is indicated in the Warranty Period Table.
b) The product is within the warranty period.
c) The product is located within the normal service area of the local TEAC Authorised Service Centre.
If TEAC determines that the product is not repairable on site, TEAC can complete the repair by taking the product to a TEAC Authorised
Service Centre.
Authorised Service Centre Service
The purchaser is required to send the product at their own expense to the nearest TEAC Authorised Service Centre for repair. In this event,
proof of purchase is required to support a warranty claim. After the repair, the product will be available for collection by or return to the
purchaser at a fee upon request. TEAC in-home service can be made available at a fee upon request.
6. A 12-month replacement warranty is applicable to all Accessories such as Remotes, Power Adapters and Cables.
7. TEAC will ensure to the best of its abilities that all required parts are made available for any required service/repair.
8. TEAC Australia Pty Ltd and its Authorised Service Centres will use their best endeavours to complete product repairs within a reasonable
period based on available resources and workload during the time when service is requested and performed.
9. Refurbished parts may be used to repair the product. In the case of a replacement, the product may be replaced, with a refurbished unit of the
same type or, if one is unavailable, a similar refurbished model with equal or better features and specifications.
10. Please be advised that if the product presented for repair is capable of retaining user-generated data, the data may be lost during servicing.
Customers are strongly encouraged to back up all important information/data before sending the product in for service/repair.
11. Service will be provided only during normal business hours and under safety conditions and circumstances. TEAC and its authorised service
agents can refuse any repair if safety, in relation to OH&S, becomes a concern to its staff or authorised service agents’ personnel.
12. The warranty is void and warranty claims may be refused, subject to the Australian Consumer Law, if:
a) The product was not transported, installed, operated or maintained according to manufacturer instruction, or
b) The product was abused, damaged, tampered, altered or repaired by any unauthorised persons, or
c) Product failure is due to accidents during use, installation or transit, power surges, use of defective or incompatible external devices, exposure
to abnormal conditions such as excessive temperatures or humidity, or entry of liquids, objects or creatures into the product, cockroach
infestations, or
d) The customer is unable to provide proof of purchase of the product for verification, or
e) The serial number of the product is missing or has been tampered with.
13. Where any repairs or services required that are outside of the terms and conditions of this Warranty are requested by the customer, or where
a fault is determined to be outside of the terms and conditions of the Warranty during an In-Home Service call, the customer shall be charged
for the cost of the repair and/or the In-Home service call fee.
14. No one is authorised to assume any liability on behalf of TEAC or impose any obligation on it, in connection with the sale of any equipment
other than as stated in this warranty and outlined above.
15. TEAC and/or its Authorised Service Centres reserve the right to inspect and verify whether the product is exhibiting a major failure as claimed
by customers/retailers.
16. LCD dead pixel policy, please contact TEAC at support@teac.com.au for assistance.
SAFETY PRECAUTIONS
This is a delicate electronic unit;
* The apparatus shall not be exposed to dripping or splashing and that no objects filled with
liquids, such as vases, shalll be placed on apparatus.
* A minimum distance of 5cm should be left arround the apparatus for sufficient ventilations.
* No naked flame sources such as lighted candles should be placed on the apparatus.
* When replacing the battery, be sure to dispose of the old one in accordance with the current
regulations. To this end, deposit it at a point which has been provided for this purpose, in
order that it will be disposed of in a safe and environmentally-friendly way.
* The apparatus can be worked regularly between 10 to 40°C.
* To prevent fire or shock hazard, do not expose this appliance to rain or moisture.
* The ventilation should not be impeded by covering the ventilation openings with items, such
as newspapers, table-cloths, curtains, etc.
WARNINGS
* To be completely disconnect the power input, the mains plug of apparatus shall be
disconnected from the mains.
* The mains plug should not be obstructed OR should be easily accessed during intended use.
* The use of apparatus in moderate climates.
ATTENTION
To reduce the risk of electric shock, do not remove the cover.
There are no user serviceable parts inside the unit. Refer all
servicing to qualified personnel.
The lightening flash with arrowhead symbol within the triangle is a
warning sign alerting the user of “dangerous voltage” inside the unit.
The exclamation point within the triangle is a warning sign alerting
the user of important instructions accompanying the products.
WARNING
To reduce the risk of fire or electric shock, do not expose this appliance to rain
or moisture.
* The marking plate is located at the bottom side of apparatus.
* Battery shall not be exposed to excessive heat such as sunshine, fire or the like.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Teac CRX060 (Aust).p65 2014/3/26, ¤U¤È 05:244
CONNECTING THE UNIT
Insert the power plug correctly into a power outlet. The clock display will show "12 : 0 0" and you need to set the
correct time. It will also return to show "12 : 0 0" if there has been a power outage and no back-up battery is
fitted.
TO SET THE TIME
Set the unit to Standby mode. You can only set the time when unit is in Standby mode.
1. Press and hold the Time Set Button for about 2 seconds. When the time display starts flashing, release the
button.
2. Press the Hour Button repeatly to adjust the hour digit. Pay attention to the PM indicator so that the correct
AM/PM hour is set. The PM indicator should light up during PM hours (12PM - 11.59PM).
3. Press the Minute Button repeatly to adjust the minute digit.
Note: Press and hold the Hour/Minute Button to change the digit at a fast speed.
4. Press the Time Set button when you have finished adjusting the time. The display will stop flashing.
CONFIGURATION AND FUNCTIONS :
1. Sleep Button
2. Tuning Down/Hour Button
3. Tuning Up/Minute Button
4. Preset/Memory Up/
Time Set Button
5. Built-In Speaker
6. FM/AM Button
7. Volume Down/Alarm Button
8. Volume Up Button
9. On/Standby/Alarm Off Button
10. Snooze Button
11. Alarm Indicator -
Buzzer / Radio
12. PM Indicator
13. LED Display
14. Battery Compartment
(Bottom side -
Backup batteries)
15. Sleep Indicator
912 876435
10
11 151412 13
Teac CRX060 (Aust).p65 2014/3/26, ¤U¤È 05:245
RADIO OPERATION
1. Press the On/Standby Button to set the unit to Radio mode.
2. Select the AM or FM band by pressing the FM/AM Button. Then the AM or FM frequency will show on the
LED display.
3. Tune a station by pressing the Tuning Up/Down Button. Pressing either Tuning Up/Down Button for more
than 1 second to activate the automatic tuning mode. The automatic tuner will scan up or down and lock onto
the next station. If the automatic tuning does not precisely tune into a radio station, press the
Tuning Up/Down Button to adjust the tuning.
4. Adjust the volume by pressing Volume Up/Down Button.
5. To turn off the radio, press the On/Standby Button to set the unit to Standby mode.
6. After tuned into a radio station, the unit will return to show the current time instead of the radio frequency
after a few seconds.
7. If you want to check the radio frequency, press either once the Tuning Up or Tuning Down button then the
unit will show the radio frequency for a few seconds.
STORES PRESET STATIONS
Up to 10 stations (10 AM and 10 FM) can be stored in memory :
1. Under RADIO mode, select the waveband by pressing the FM/AM Button.
2. Tune to a desired station as described in previous section.
3. Press and hold the Preset/Memory Up Button for about 2 seconds then the Preset Station Number will flash.
Release the button.
4. Press once or more times the Volume Up/Down Button to select your desired Preset Station Number from
P1 to P10.
5. Press once the Preset/Memory Up Button then the Preset Station Number will stop flashing.
Now the station is stored in your desired Preset Station Number.
To replace a station stored in the memory, repeat all the stages described above. The new station will replace
the previously stored one.
To receive Preset Stations :
1. Under RADIO mode, select the waveband by pressing the FM/AM Button.
2. Press once or more times the Preset/Memory Up Button to select the desired Preset Station Number.
TO SET THE ALARM TIME AND THE ALARM MODE
Set the unit to Standby mode. You can only set the alarm time when unit is in Standby mode.
1. Press and hold the the Alarm Button for 2 seconds Then the alarm time will be flashing. Release the button.
2. Press the Hour Button once and repeatly to adjust the hour digit.
3. Press the Minute Button once and repeatly to adjust the minute digit.
Note: Press and hold the Hour/Minute Button will change the digit at a fast speed.
4. Press once again the Alarm Button when it reaches the right time. Then the alarm time will stop flashing.
The alarm time is set.
5. Press once or more times the Alarm button to select which type of alarm you like as below :-
a) Alarm - Indicator light on : Buzzer selected as alarm type.
b) Alarm - Indicator light on : Radio selected as alarm type.
c) Alarm - & Indicators both light off : No alarm selected, meaning that the unit will
not alarm when it reaches the Alarm set time.
USE THE ALARM
1. Set the Alarm time and select alarm type as described in previous section. Make sure the Alarm indicator is
on.
2. When it reach the alarm time, you can hear the radio or buzzer sound depending on which alarm type you
have selected before.
3. Press once the Alarm Off Button to turn off the alarm sound then the radio or buzzer sound will be off.
Note : If you select AM or FM Radio as alarm type, make sure you have turned a desired station and a suitable
volume level before using this alarm type.
Teac CRX060 (Aust).p65 2014/3/26, ¤U¤È 05:246
SNOOZE OPERATION
To get another 9 minutes sleep after the alarm rings, press the Snooze Button after the radio or the buzzer
sounds at the preset wake-up time. The Alarm Indicator will be flashing. This will silence the radio or the buzzer
for 9 minutes. You can repeat this operation for up to about 1 hour.
GOING TO SLEEP WITH THE SOUND OF THE RADIO
1. Press the Sleep Button to activate the Sleep function. The Sleep Indicator will on.
2. Press the Sleep Button repeatedly to select the sleeping time (minutes) as
90-80-70-60-50-40-30-20-10 -OFF (OFF meaning that Sleep function is cancelled). After setting the
sleeping time, the radio return to standby mode when it reached the sleep set time.
To turn off the Sleep function, simply press once the On/Standby Button. The Sleep Indicator will turn off and
the unit will return to Standby mode.
GOING TO SLEEP AND WAKENING TO THE SOUND OF THE UNIT
1. Repeat steps described in "TO SET THE ALARM TIME AND THE ALARM MODE" and "USE THE ALARM".
2. Press the Sleep Button and set the period of time you want to listen to the radio before it switches off
automatically.
3. The radio is now programmed to turn itself off after you go to sleep and the alarm will trigger automatically
at the preset wake-up time.
BATTERY BACK-UP
This clock radio has a back-up power system to ensure continuous operation of the clock in the event of a
power failure. The switch from AC to battery power is automatic. However, under battery power, the clock
display will not illuminate even though the clock maintains the correct time and stores the alarm time in the
memory. The system operates on 2x1.5V "AAA" size batteries (not included). We recommend the use of a long
life battery to ensure maximum performance.
CHECKING THE TIME DURING NO SUPPLY OF AC POWER (WITH BACKUP BATTERIES)
When there is no supply of AC power but the unit is fitted with 2x1.5V "AAA" size batteries (for backup), the
display will not show any information. However, you can still check the current time by pressing any button to
display the current time for a few seconds. The alarm is disabled while the clock is on backup battery power.
ANTENNA
The unit has a flexible wire on the back of the unit and it should be extended to its full length for best reception
white receiving FM radio. For AM, the radio is supplied with a built-in directional aerial, rotate the unit for the
best AM reception.
SPECIFICATIONS
Power Source : AC240V ~ 50Hz
DC3V , 2x1.5V "AAA" size batteries type (for clock back-up)
(battery not included)
Frequency Range : FM 87.5-108 MHz
AM 522-1620 kHz
Dimensions : 130(L) x 91(D) x 45(H) MM
Weight : 280g
Weight and dimensions are approximate because we continually strive to improve our products, specifications
may change without prior notice.
Teac CRX060 (Aust).p65 2014/3/26, ¤U¤È 05:347
In the event of a product failure within the warranty period, please call the
TEAC Warranty Service Hotline
1300 553 315
Between Monday to Friday - 8.30AM to 5PM AEST
*Please have your purchase receipt and the product's serial number ready
For other enquiries and support please email
support@teac.com.au
Teac CRX060 (Aust).p65 2014/3/26, ¤U¤È 05:248
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
in altre lingue
- English: TEAC CRX060 User manual
Documenti correlati
-
TEAC PR192 Manuale utente
-
-
-
-
-
-
TEAC R-5 Manuale del proprietario
-
-
TEAC T-R650 Manuale del proprietario
-