Haier QHC15AXW1 Manuale del proprietario

Haier
Marca
Haier
Modello
QHC15AXW1
Tipo
Manuale del proprietario
49-7827-2 11-18 GEA
Installation and User Manual
Instrucciones de instalación y
Manual del usuario
QHC15
QHC18
QHC24
Room Air Conditioner
Accondicionadores de Aire Para Sala
2 49-7827-2
ENGLISH
ENGLISH
49-7827-2 3
ENGLISH
Record Keeping
SAFETY INFORMATION .......................................................................................................4
USING THE AIR CONDITIONER
Controls ............................................................................................................................5
Remote Control .....................................................................................................................6
Cool Mode ..........................................................................................................................6
Energy Saver Mode ..................................................................................................................6
Air Direction ........................................................................................................................7
CARE AND CLEANING
Grille and Case ......................................................................................................................7
Air Filter .............................................................................................................................7
Outdoor Coils .......................................................................................................................7
Install Batteries in Remote ...........................................................................................................7
INSTALLATION INSTRUCTIONS
Before you begin ....................................................................................................................8
Electrical Requirements .............................................................................................................8
Parts Included .......................................................................................................................9
Window Requirements .............................................................................................................10
Prepare the Air Conditioner .........................................................................................................10
Install the Air Conditioner ...........................................................................................................11
Install Support Brackets ............................................................................................................12
TROUBLESHOOTING TIPS ..................................................................................................13
Normal Operating Sounds ..........................................................................................................14
WIFI SETUP ......................................................................................................................14
CONSUMER SUPPORT
Limited Warranty ...................................................................................................................16
Thank you for purchasing this Haier product. This user manual will
help you get the best performance from your new air conditioner.
For future reference, record the model and serial number located on
the label on the side of your air conditioner, and the date of purchase.
Staple your proof of purchase to this manual to aid in obtaining
warranty service if needed.
_______________________________________
Model number
_______________________________________
Serial number
_______________________________________
Date of purchase
TABLE OF CONTENTS
4 49-7827-2
ENGLISH
For your safety, the information in this manual must be followed to minimize the risk of fire, electric
shock or personal injury.
•
Use this appliance only for its intended purpose as
described in this Owner’s Manual.
•
This air conditioner must be properly installed in accordance
with the Installation Instructions before it is used.
•
Never unplug your air conditioner by pulling on the power
cord. Always grip plug firmly and pull straight out from the
receptacle.
•
Replace immediately all electric service cords that have
become frayed or otherwise damaged. A damaged power
supply cord must be replaced with a new power supply
cord obtained from the manufacturer and not repaired.
Do not use a cord that shows cracks or abrasion damage
along its length or at either the plug or connector end.
•
Turn the unit OFF and unplug your air conditioner before
cleaning.
•
GE Appliances does not support any servicing of the air
conditioner. We strongly recommend that you do not
attempt to service the air conditioner yourself.
•
For your safety…do not store or use combustible
materials, gasoline or other flammable vapors or liquids in
the vicinity of this or any other appliance.
•
All air conditioners contain refrigerants, which under federal
law must be removed prior to product disposal. If you are
getting rid of an old product with refrigerants, check with
the company handling disposal about what to do.
•
If the receptacle does not match the plug, the receptacle
must be changed out by a qualified electrician.
• These R410A air conditioning systems require
contractors and technicians to use tools, equipment and
safety standards approved for use with this refrigerant.
DO NOT use equipment certified for R22 refrigerant
only.
WARNING
USE OF EXTENSION CORDS
RISK OF FIRE. Could cause serious injury or death.
•
DO NOT use an extension cord with this Window Air
Conditioner.
•
DO NOT use surge protectors or multi-outlet adaptors
with this Window Air Conditioner.
HOW TO CONNECT ELECTRICITY
Do not, under any circumstances, cut or remove the third
(ground) prong from the power cord. For personal safety, this
appliance must be properly grounded.
DO NOT use an adapter plug with this appliance.
The power cord of this appliance is equipped with a 3-prong
(grounding) plug which mates with a standard 3-prong
(grounding) wall outlet to minimize the possibility of electric
shock hazard from this appliance.
Power cord includes a current interrupter device. A test
and reset button is provided on the plug case. The device
should be tested on a periodic basis by first pressing the
TESTåø÷÷òñäñç÷ëèñ÷ëèRESETåø÷÷òñúëìïèóïøêêèç
into the outlet. If the TESTåø÷÷òñçòèöñò÷÷õìóòõìé÷ëè
RESETåø÷÷òñúìïïñò÷ö÷äüèñêäêèççìöæòñ÷ìñøèøöèòé÷ëèäìõ
conditioner and contact a qualified service technician.
Have the wall outlet and circuit checked by a qualified
electrician to make sure the outlet is properly grounded.
Where a 2-prong wall outlet is encountered, it is your
personal responsibility and obligation to have it replaced with
a properly grounded 3-prong wall outlet.
The air conditioner should always be plugged into its own
individual electrical outlet which has a voltage rating that
matches the rating plate.
This provides the best performance and also prevents
overloading house wiring circuits which could cause a fire
hazard from overheated wires.
See the Installation Instructions, Electrical Requirements
section for specific electrical connection requirements.
WARNING
WARNING
Chemical Burn Hazard. Keep batteries away from children.
•
This product contains a lithium button/coin cell battery.
If a new or used lithium button/coin cell battery is
swallowed or enters the body, it can cause severe
internal burns and can lead to death in as little as 2 hours.
Always completely secure the battery compartment. If
the battery compartment does not close securely, stop
using the product, remove the batteries, and keep it
away from children.
•
If you think batteries might have been swallowed or placed
inside any part of the body, seek immediate medical
attention.
•
The cells shall be disposed of properly, including keeping
them away from children.
• Even used cells may cause injury.
READ AND SAVE THESE INSTRUCTIONS
SAFETY INFORMATION
49-7827-2 5
ENGLISH
Features and appearance will vary.
Lights beside the touch pads on the air conditioner control panel
indicate the selected settings.
Remote Control
Air Conditioner Controls
LOW
AUTO
COOL
SPEED
MODE
MED
HIGH
FAN ECO
FILTER
SLEEP
WIFI
1 2 3 4
5
8 7
9
1. Power Pad
Turns air conditioner on and off. When turned on, the
display will show the room temperature.
2. Display
Shows the room temperature or time remaining on the
Delay timer. Shows the Set temperature while setting the
temperature in Cool or Eco modes.
3. Temp and Delay Increase ޔ /Decrease ޕ Pads
Use to set temperature or delay time. Temperature can be
set in Cool and Eco mode.
4. Mode Pad
Use to set the air conditioner to Fan Only, Cool, or Eco
mode.
5. Fan Speed Pad
In Cool or Eco mode: Use to set the fan speed to Auto,
High, Med or Low on the unit.
In Fan Only mode: Use to set the fan speed to High, Med,
or Low on the unit.
6. Delay Pad (set by remote control only)
Delay ON—When the air conditioner is off, it can be set
to automatically come on in 1 to 24 hours at its previous
mode and fan settings.
Delay OFF—When the air conditioner is on, it can be set to
automatically turn off in 1 to 24 hours.
How to set:
Press the Delay pad on the remote control. Each touch of
the Increase ޔ / Decrease ޕ pads on the remote control will
set the timer in 1-hour intervals.
To review the remaining time on the Delay timer, press
the Delay pad on the remote control. Use the Increase ޔ /
Decrease ޕ pads on the remote control to set a new time if
desired.
To cancel the timer, press Decrease ޕ pad on the remote
control until the set time is zero.
7. Sleep Pad (set by air conditioner controls only)
The SLEEP mode sets the unit to gradually change
settings over an 8 hour period to allow for some
increased energy efficiency during sleep hours.
The SLEEP mode is available only in COOL and FA N only
settings.
Press the SLEEP mode pad and its light will illuminate.
The fan indicator will stay at the same setting but the air
conditioner will automatically change the FA N speed to
low in either COOL or FA N only mode.
In FA N only mode, the fan will stay in the LOW speed
setting for 8 hours. After 8 hours, the air conditioner will
resume the settings that were in place before the SLEEP
mode pad was pressed.
In COOL mode, the fan will stay in the LOW speed
setting for 8 hours from the time the SLEEP mode pad
was pressed. The air conditioner will also raise the set
point 2°F in 30 minutes and 2°F more in another 30
minutes where it will remain for the next 7 hours. After 8
hours, the air conditioner will resume the settings that
were in place before the SLEEP mode pad was pressed.
While the unit is in SLEEP mode, pressing any pad will
return it to the settings that were in place before the
SLEEP mode pad was pressed.
8. Filter Reset Pad
This feature automatically notifies you that the air filter
must be cleaned. The indicator light will come on after 240
hours of operation. Clean the air filter (refer to page 6),
place it back in the front panel, and press the Filter Reset
pad. The light will go off.
9. WiFi Connect Pad
Enables connection of the air conditioner to the home
WiFi.
Download the Haier Home App
For details go to Haierappliances.com.
Solid light indicates WiFi
connected
Blinking light indicates
connecting
See Appliance Communication
section in this manual
DELAY
MODE
ON/OFF
SPEED
TEMP/TIME
TEMP/TIME
1
4
5
6
3
CONTROLS
6 49-7827-2
ENGLISH
Remote Control
• To ensure proper operation, aim the remote control at the
signal receiver on the air conditioner.
• The remote control signal has a range of up to 20 feet.
• Make sure nothing is between the air conditioner and the
remote control that could block the signal.
• Make sure batteries are fresh and installed correctly as
indicated on the remote control.
Do Not Operate in Freezing Outdoor Conditions
This cool-only air conditioner was not designed for freezing
outdoor conditions.
It must not be used when the outdoor temperature is below
freezing (32°F).
Cool Mode
Use the Cool mode at Low, Med, High or Speed for cooling.
Use the Temperature Increase
ޔ
/ Decrease
ޕ
pads to
set the desired temperature between 64°F and 86°F in 1°F
increments.
An electronic thermostat is used to maintain the room
temperature. The compressor will cycle on and off to keep
the room at the set level of comfort. Set the thermostat at a
lower number and the indoor air will become cooler. Set the
thermostat at a higher number and the indoor air will become
warmer.
NOTE:Òé÷ëèäìõæòñçì÷ìòñèõìöòééäñçìö÷ëèñ÷øõñèçòñ
while set to a Cool setting or if turned from a fan setting to
a Cool setting, it may take approximately 3 minutes for the
compressor to start and cooling to begin.
Cooling Descriptions
For Normal Cooling—Select the Cool mode and
High or Med fan with a middle set temperature.
For Maximum Cooling—Select the Cool mode
and High fan with a lower set temperature.
For Quieter and Nighttime Cooling—Select the
Cool mode and Low fan with a middle set temperature.
Eco Mode
Controls the fan.
ON—The fan will cycle on and off with the compressor. This
may result in wider variations of room temperature and
humidity. NOTE: the fan may continue to run for a short time
or may pulse intermittently after the compressor cycles off to
sample the room air.
OFF—The fan runs all the time, while the compressor cycles
on and off.
Fan Only Mode
Use the Fan Only Mode at Low, Med or High fan speed to
provide air circulation and filtering without cooling. Since
fan-only settings do not provide cooling, a Set temperature
cannot be entered. The room temperature will appear in the
display.
Auto Fan Mode
Set to Auto for the fan speed to automatically set to the
speed needed to provide optimum comfort settings with the
set temperature.
If the room needs more cooling, the fan speed will
automatically increase. If the room needs less cooling, the fan
speed will automatically decrease.
Control Panel Lights On/Off Feature
This air conditioner has a control panel lights on/off feature
where its lights will turn off when there is no activity with the
controls for over one minute. To wake up the controls, press
any pad on the controls and the lights will come on to show
the previous settings.
To turn this feature off, press and hold the SLEEP pad,
on the unit, for 5 seconds. The unit will beep to signal the
successful toggle of the feature on and off.
USING THE AIR CONDITIONER
49-7827-2 7
ENGLISH
Air Direction
Use the lever to adjust the air direction left, right, up and
down.
Grille and Case
Turn the air conditioner off and remove the plug from the wall
outlet before cleaning.
To clean, use water and a mild detergent. Do not use bleach
or abrasives.
Air Filter
Outdoor Coils
The coils on the outdoor side of the air conditioner should be
checked regularly. If they are clogged with dirt or soot, they
may be professionally cleaned.
How to Insert the Battery in the Remote Control
The air filter behind the front grille should be checked and
cleaned at least every 30 days or more often if necessary.
To remove:
Open the inlet grille by pulling downward on the tabs at the
top upper corners of the inlet grille until the grille is in a 45º
position. Remove the filter.
Clean the filter with warm, soapy water. Rinse and let the filter
dry before replacing it. Do not clean the filter in a dishwasher.
CAUTION
ÍØ×ØÝòóèõä÷è÷ëèäìõæòñçì÷ìòñèõúì÷ëòø÷äéìï÷èõåèæäøöè
dirt and lint will clog it and reduce performance.
1.
Remove the screw on the back of the battery cover.
2.
Pinch the slide lock and pull the battery tray out at the same
time.
3.
Insert new battery, making sure that the (+) and (–) of
battery are installed correctly.
4.
Reinsert the battery tray and reinstall the screw.
NOTES:
•
Use one CR 2025 (3V) Lithium battery.
•
Remove the battery from the remote control if the system
is not going to be used for a long time.
USING THE AIR CONDITIONER
CARE AND CLEANING
8 49-7827-2
ENGLISH
FOR MORE HELP, VISIT HAIERAPPLIANCES.COM OR CALL THE CONSUMER HELP LINE AT 1-877-337-3639.
BEFORE YOU BEGIN
Read these instructions completely and carefully.
•
IMPORTANT – Save these instructions
for local inspector’s use.
•
IMPORTANT – Observe all governing
codes and ordinances.
• Note to Installer – Be sure to leave these
instructions with the Consumer.
• Note to Consumer – Keep these instructions for
future reference.
• Skill level – Installation of this appliance requires
basic mechanical skills.
• Completion time – Approximately 1 hour
• We recommend that two people install
this product.
• Proper installation is the responsibility
of the installer.
• Product failure due to improper installation is not
covered under the Warranty.
• You MUST use all supplied parts and use proper
installation procedures as described in these
instructions when installing this air conditioner.
TOOLS YOU WILL NEED
Phillips head screwdriver
Ruler or tape measure
Pencil
Level Scissors or knife
Drill and 1/8” drill bit
Models QHC18 and QHC24
The 3-prong grounding plug minimizes the
possibility of electric shock hazard. If the wall
outlet you plan to use is only a 2-prong outlet,
it is your responsibility to have it replaced with a
properly grounded 3-prong wall outlet.
These models require 230/208-volt AC,
protected with a time-delay fuse or circuit breaker.
These models should be installed on their own single
branch circuit for best performance and to prevent
overloading house or apartment wiring circuits, which
could cause a possible fire hazard from overheating
wires.
Model QHC15
These models require a 115/120-volt AC,
60-Hz grounded outlet protected with a
15-amp time-delay fuse or circuit breaker.
The 3-prong grounding plug minimizes the possibility of
electric shock hazard. If the wall outlet you plan to use is
only a 2-prong outlet, it is your responsibility to have it
replaced with a properly grounded 3-prong wall outlet.
ELECTRICAL REQUIREMENTS
Power cord includes a current interrupter device. A
test and reset button is provided on the plug case.
The device should be tested on a periodic basis by first
pressing the TESTåø÷÷òñäñç÷ëèñ÷ëèRESETåø÷÷òñ
while plugged into the outlet. If the TESTåø÷÷òñçòèö
not trip or if the RESETåø÷÷òñúìïïñò÷ö÷äüèñêäêèç
discontinue use of the air conditioner and contact a
qualified service technician.
ELECTRICAL REQUIREMENTS (CONT)
CAUTION
Do not, under any circumstances, cut or remove the
third (ground) prong from the power cord.
Do not change the plug on the power cord of this air
conditioner.
Aluminum house wiring may present special
problems—consult a qualified electrician.
INSTALLATION INSTRUCTIONS
49-7827-2 9
ENGLISH
3/8” Self-tapping
Screws (12)
Installation
Bracket (2)
Window Lock
Bracket
Remote Control
Top Mounting Rail
(may be installed already)
Foam Seal
3/8” Bracket
Screws (6)
1” Wood
Screws (8)
2-1/2” Flat Head Bolt and
Lock Nut (2)
ABC D
DELAY
MODE
ON/OFF
SPEED
TEMP/TIME
TEMP/TIME
Side Curtain
Frame
Left
Right
Side Curtain
(2)
Side Curtain
Foam (2)
Air
Conditioner
Bottom Seal and
Side Seals (6)
INSTALLATION INSTRUCTIONS
10 49-7827-2
ENGLISH
3. PREPARE THE AIR CONDITIONER
A. Remove three screws on each side of the case. Save
the screws for use later.
B. Insert a flat head screw driver between the front
grille and the metal case along the sides. Gently pry
the grille from the case.
NOTE: Cover the flat head screw driver with tape to
prevent scratching the case.
C. The front panel of the air conditioner is corded to
the air conditioner. They cannot be separated.
D. While one person holds the front panel, have a
second person pull the air conditioner out of the
case using the handle on the bottom front of the air
conditioner.
E. The air conditioner is very heavy so make sure that it
will be resting on a sturdy surface.
!àÒ×ÍØàÛÎÚÞÒÛÎÖÎ×ÝÜ
• These instructions are for a standard double-hung
window. You will need to modify them for other
types of windows.
• The air conditioner can be installed without the
side curtain panels if needed to fit in a narrow
window. See the window opening dimensions.
• All supporting parts must be secured to firm
wood, masonry or metal.
• The electrical outlet must be within reach of the
power cord.
• Follow the dimensions in the table and illustration
for your model.
2. STORM WINDOW REQUIREMENTS
A storm window frame will not allow the air
conditioner to tilt toward the outside, and will keep
it from draining properly. To adjust for this, attach
a piece of wood to the sill.
àØØÍÙÒÎÌÎÜ
WIDTH: 2ė
LENGTH: Long enough to fit inside the window
frame.
THICKNESS: To determine the thickness, place
äóìèæèòéúòòçòñ÷ëèöìïï÷òðäîèì÷!¦"ėëìêëèõ
than the top of the storm window frame or the
vinyl frame.
Attach securely with nails or screws provided by
the installer.
A
(With side curtain panels)
B
!¦"ėëìêëèõ
than storm
window
frame
Storm window
frame
Wood
Sill
!¦"ėëìêëèõ
than vinyl frame
(on some windows)
Vinyl frame
Models A B
QHC15
QHC18
QHC24
19 1/8” min 30”-39”
Save these screws
for later use.
Front Panel
or Grill
Case
Air
Conditioner
INSTALLATION INSTRUCTIONS
49-7827-2 11
ENGLISH
4. PREPARE THE CASE
NOTE: Attach curtains to the air conditioner before
placing the air conditioner in the window.
A. Install top mounting rail (if not already installed) with
four type A screws.
B. Slide left-hand curtain assembly into left end of top
and bottom mounting rail. Repeat for right hand
curtain assembly.
C. Fasten curtain retainer strips to the sides of the
outer case with four type A screws on each side.
holes. Use 4 type B screws to secure the side panels
in place.
3/8” Self Tapping
Screws
3/8” Self Tapping
Screws
Top Channel
Side Curtains
6 INSTALL OUTER CASE IN WINDOW
A. Place outer case in window. Lower sash until it rests
behind front flange of top mounting rail. Bottom
mounting rail must rest behind window sill.
B. Expand the curtain panels to fill the window. Secure
with type C wood screw in top and bottom corners.
If needed, use drill and 1/8” bit to drill pilot holes for
the screws.
C. Use three type C screws to secure the case to the
window sill. Drill pilot holes if necessary.
Bottom rail
Top rail
Window sash
SILL
About
Û
1” Wood Screws
(2) 1” Wood
Screws
5. PREPARE WINDOW FOR
INSTALLATION
A. Measure the width of the window opening.
B. Mark the center line on the inside windowsill.
C. Apply the weather seals provided to the bottom,
top and sides of the window to the seal around the
perimeter of the air conditioner.
B
A
Cut and apply
weather strip to
front and bottom
edge of window
frame.
Cut and apply
weather strip to
back edge of
the window sill.
Cut and apply a
weather strip to
side of the curtain
frame (one on
each side).
A. Width of window opening
B. Center line
INSTALLATION INSTRUCTIONS
12 49-7827-2
ENGLISH
6 INSTALL OUTER CASE IN WINDOW
D. Thread nut onto bolt, then thread the bolt into the
triangle bracket as shown in the figure below.
E. Attach triangle bracket onto bottom of case using
three type B screws for each bracket. Make sure
that the bracket is close enough to the outside wall
that the bolt can touch. Adjust bolt so that it is snug
against the outside wall.
NOTE: A block of wood can be placed between the bolt
and the outside wall if the bolt rests between studs.
7. COMPLETE INSTALLATION
A. Insert the foam seal behind the top of the lower
window sash and against the glass of the upper
window.
B. Place the window lock bracket as shown. Use a 1/8”
drill bit to drill a starter hole through the hole in the
window lock bracket and into the upper window.
CAUTION
To prevent broken glass or damage to windows, on
vinyl or other similarly constructed windows, attach
the window locking bracket to the window side jamb
with one Type B screw.
C. Attach the window lock bracket to the upper window
with a type C screw to secure the window in place.
A
B
A. Top of lower window sash
B. Foam seal
Vinyl
Wood
8. RETURN CHASSIS TO THE OUTER
CASE
A. Once the case is securely attached to the window,
reinstall the air conditioner. Have two people lift the
air conditioner and slide it into the case. Make sure
that the corded front panel is positioned so that it
does not interfere with sliding the air conditioner
into the case.
B. Snap the front grille back onto the air conditioner.
Use the screws removed at the beginning of the
installation to secure the grille. Re-use screws from
Step 3 on page 9.
C. Measure and cut adhesive foam backed sheet. Apply
over side curtain and frame.
D. Plug into a grounded 3-prong outlet.
E. Press RESET on the power supply cord. See
Electrical Requirements.
Side Curtain
Foam
Weather
Seals
INSTALLATION INSTRUCTIONS
49-7827-2 13
ENGLISH
Problem Possible Cause What To Do
Air conditioner does not
start.
The unit is unplugged. Make sure the air conditioner plug is pushed completely into
the outlet.
The fuse is blown/circuit breaker is
tripped.
Check the house fuse/circuit breaker box and replace the fuse
or reset the breaker.
Power Failure. The unit will automatically restart in the setting last used after
the power is restored.
There is a protective time delay (approximately 3 minutes) to
prevent tripping of the compressor overload. For this reason,
the unit may not start normal cooling for 3 minutes after it is
turned back on.
The current interrupter device is
tripped.
Press RESET button located on the power cord plug.
If the RESET button will not stay engaged, discontinue use of
the air conditioner and contact a qualified service technician.
Air conditioner does not
cool as it should.
Indoor airflow is restricted. Make sure there are not curtains, blinds or furniture blocking
the front of the air conditioner.
The temp control may not be set
properly.
Turn the temperature control to a higher number.
The air filter is dirty. Clean the filter at least every 30 days. See Care and Cleaning
section.
The room may have been hot. When the air conditioner is first turned on, you need to allow
time for the room to cool down.
Cold air is escaping. Check for open furnace registers and cold air returns.
Cooling coils have iced up. See “Air conditioner freezing up” below.
Air conditioner freezing up Ice blocks the air flow and stops
the air conditioner from cooling the
room.
Set the mode control to High Fan or High Cool with the
temperature setting as high as it can be set.
Water drips outside Hot, humid weather. This is normal.
Water drips inside The air conditioner is not tilted to
the outside.
For proper disposal, make sure the air conditioner slants
slightly from the case front to the rear.
Water collects in base pan Moisture removed from air and drain
into base pan.
This is normal for a short period in areas with little humidity;
normal for a longer period in very humid areas.
Save time and money! Review the charts on the following pages first and you may not need to call for service.
For more help, visit Haierappliances.com or call the Consumer Help Line at 1-877-337-3639.
TROUBLESHOOTING
14 49-7827-2
ENGLISH
• You may hear a pinging noise caused by water being picked up and thrown
against the condenser on rainy days or when the humidity is high. This
design feature helps remove moisture and improve efficiency.
• You may hear the thermostat click when the compressor cycles on and off.
• Water will collect in the base pan during high humidity or on rainy days. The
water may overflow and drip from the outdoor side of the unit.
• The fan may run even when the compressor does not.
• Water droplets being thrown against the outside coils can make a pinging
noise. This helps cool the condenser. You can reduce this noise by
removing the subbase water plug.
Removing this plug will lower the Energy Efficiency of your until.
NOTE: Do not drill hole in the base pan.
Haier WiFi Connect (for customers in the United States)
Haier WiFi Connect Enabled*. If your Air Conditioner (AC) has a Connected Appliance Information label located on the
outside as shown below, your AC is Haier Appliances WiFi Connect Enabled. A WiFi
communication card is built into the
product allowing it to communicate with your smart phone for remote monitoring, control and notifications.
Please
download the Haier Home App . For details go to Haierappliances.com
to learn more about connected appliance
features, and to learn what connected appliance apps will work with your smart phone.
WiFi Connectivity: For assistance with the appliance or the ConnectPlus network connectivity (for models that are WiFi enabled
or WiFi optional), please call 1-800-220-6899.
Network: GE_MODULE_XXXXNetwork: GE_MODULE_XXXX
PASSWORD: XXXXXXXX
MAC ID: XX-XX-XX-XX-XX-XX
CONTAINS FCCID: xxxxx-xxxxxxxxxxx CONTAINS IC: xxxxx-xxxxxxxxxxx
123-45-678
NORMAL OPERATING SOUNDS
WIFI SETUP
49-7827-2 15
ENGLISH
REGULATORY INFORMATION
FCC/IC Compliance Statement:
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received,
including interference that may cause undesired
operation.
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates uses
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/television
technician for help.
Labelling: Changes or modifications to this unit not
expressly approved by the manufacturer could void the
user’s authority to operate the equipment.
*Select Models Only
This product has Wi-Fi capability and requires Internet
connectivity and a wireless router to enable interconnection
with an Energy Management System, and/or with other
external devices, systems or applications.
Use of the Works with Apple HomeKit™ logo means that
an electronic accessory has been designed to connect
specifically to iPod touch
®
, iPhone
®
, or iPad
®
, respectively,
and has been certified by the developer to meet Apple
®
performance standards. Apple is not responsible for the
operation of this device or its compliance with safety and
regulatory standards.
How it Works
Download the
Haier Home App Use the app to connect your room air
conditioner to WiFi
Once connected, use the app to turn
down your air conditioner as you leave
work.
CHANGE TEMP
TO 65
Getting Started
To connect your room air conditioner, you’ll need the Haier
Home App. The app will walk you through the connection
process. Download the app from iTunes or Google Play.
All connected appliace data is held in strict accordance with
the Haier Appliances Connected Data Privacy Policy. Visit
geappliances.com/privacy/privacy_policy_connected to
view this policy.
Questions about U+ Connect
Get answers you need about setting up WiFi appliances and
connecting to your home network in our support articles.
Visit products.geappliances.com/appliance/gea-support-
search-content to view wifi connect room air conditioner
support articles.
WIFI SETUP
16 49-7827-2
ENGLISH
LIMITED WARRANTY
•
Service trips to your home to teach you how to use the
product.
•
Improper installation, delivery or maintenance. If you
have an installation problem, or if the air conditioner is of
improper cooling capacity for the intended use, contact
your dealer or installer. You are responsible for providing
adequate electrical connecting facilities.
•
Failure of the product resulting from modifications to the
product or due to unreasonable use including failure to
provide reasonable and necessary maintenance.
•
In commercial locations, labor necessary to move the unit to
a location where it is accessible for service by an individual
technician.
•
Replacement of house fuses or resetting of circuit breakers.
•
Failure due to corrosion on models not corrosion-protected.
•
Damage to the product caused by improper power supply
voltage, accident, fire, floods or acts of God.
•
Incidental or consequential damage caused by possible
defects with this air conditioner.
•
Damage caused after delivery.
What Haier Appliances Will Not Cover:
This limited warranty is extended to the original purchaser and any succeeding owner for products purchased
for home use within the USA. If the product is located in an area where service by a GE Authorized Servicer is not
available, you may be responsible for a trip charge or you may be required to bring the product to an Authorized
ÐÎÜèõùìæèïòæä÷ìòñéòõöèõùìæèÒñÊïäöîä÷ëèïìðì÷èçúäõõäñ÷üèûæïøçèö÷ëèæòö÷òéöëìóóìñêòõöèõùìæèæäïïö÷ò
your home.
Some states do not allow the exclusion or limitation of incidental or consequential damages. This limited warranty
gives you specific legal rights, and you may also have other rights which vary from state to state. To know what
your legal rights are, consult your local or state consumer affairs office or your state’s Attorney General.
Warrantor US:
GE Appliances, a Haier company
Louisville, KY 40225
To schedule service, visit us on-line at Haierappliances.com, or call 1-877-337-3639. Have serial number and model
number available when calling for service.
EXCLUSION OF IMPLIED WARRANTIES—Your sole and exclusive remedy is product repair as provided in this Limited
Warranty. Any implied warranties, including the implied warranties of merchantability or fitness for a particular purpose,
are limited to one year or the shortest period allowed by law.
For The Period Of: Haier Appliances Will Replace:
One Year
From the date of the original
purchase
Any part of the air conditioner which fails due to a defect in materials or workmanship. During
this limited one-year warranty, GE Appliances will also provide, free of charge, all labor and
related service to replace the defective part.
16 49-7827-2
ESPAÑOL
Printed in China
IMPORTANTE
No regrese este producto a la tienda
Si tiene un problema con este producto, por favor comuníquese al 1-877-337-
3639 para solicitar el nombre y número telefónico del centro de servicio al cliente
autorizado más cercano.
NECESITA UNA PRUEBA DE COMPRA FECHADA, NÚMERO DE MODELO
Y DE SERIE PARA EL SERVICIO DE LA GARANTÍA
IMPORTANT
Do Not Return This Product To The Store
If you have a problem with this product, please call 1-877-337-3639 for the name
and telephone number of the nearest authorized service center.
DATED PROOF OF PURCHASE REQUIRED FOR WARRANTY SERVICE
ESPAÑOL
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17

Haier QHC15AXW1 Manuale del proprietario

Haier
Marca
Haier
Modello
QHC15AXW1
Tipo
Manuale del proprietario
Scarica il pdf
rapporto

in altre lingue

Documenti correlati

Altri documenti