NEC SB-06WC Manuale utente

Marca: NEC

Modello: SB-06WC

Categoria: Proiettori

Tipo: Manuale utente

Questo manuale è adatto anche per

Car Stereo System SB-06WC

User's Manual

Wireless Display Media Player

SB-06WC

Index

Declaration of conformity ··················································································English-1

Safety Precautions and Maintenance ·······························································English-5

Information ········································································································English-6

Accessory ··········································································································English-7

Part Names ········································································································English-8

Connections ······································································································English-9

Installation ·······································································································English-10

Installation of protector for wireless LAN unit ········································English-11

Installation of protector for SD memory card ·········································English-12

Installation of adapter for wireless LAN unit ··········································English-13

Basic Operation ·······························································································English-14

Preparations ···························································································English-14

Display remote control ···········································································English-14

Dedicated remote control for the projector ············································English-15

Operations and settings of the display and projector ····························English-16

Product Operations ················································································English-16

Selection of Functions ············································································English-16

Setting the display language ··································································English-16

Screen Saver ··························································································English-16

Function Controls ····························································································English-17

1. Wireless Display ·················································································English-17

2. Media Player ······················································································English-19

3. Settings ······························································································English-24

Troubleshooting ······························································································English-34

Speciﬁcations ··································································································English-36

English-1

Declaration of conformity

FCC statement

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that interference will not occur in

a particular installation. If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Declaration of Conformity

This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions. (1)

This device may not cause harmful interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

U.S. Responsible Party: NEC Display Solutions of America, Inc.

Address: 500 Park Boulevard, Suite 1100

Itasca, Illinois 60143

Tel. No.: (630) 467-3000

Type of Product: Wireless Display Media Player

Equipment Classiﬁcation: Class B Peripheral

Model: SB-06WC

We hereby declare that the equipment specied above

conforms to the technical standards as specied in the FCC Rules.

FCC Caution: Any changes or modiﬁcations not expressly approved by the party responsible for

compliance could void the user’s authority to operate this equipment.

This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or

transmitter.

IMPORTANT NOTE:

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This

equipment should be installed and operated with minimum distance 20cm between the radiator & your

body.

Country Code selection feature to be disabled for products marketed to the US/CANADA

Operations in the 5.15-5.25GHz band are restricted to indoor usage only.

English-2

Industry of Canada statement

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the

following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired operation

of the device.

Caution:

(With DFS band)

(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for

harmful interference to co-channel mobile satellite systems;

(ii) the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz

shall comply with the e.i.r.p. limit; and

(iii) the maximum antenna gain permitted for devices in the band 5725-5825 MHz shall comply with the

e.i.r.p. limits speciﬁed for point-to-point and non point-to-point operation as appropriate.

(iv) Users should also be advised that high-power radars are allocated as primary users (i.e. priority

users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause

interference and/or damage to LE-LAN devices.

Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This

equipment should be installed and operated with minimum distance 20cm between the radiator & your

body.

Antenna list:

Model Type Connector 2.4~2.4835GHz 5.15~5.25GHz 5.25~5.35GHz 5.47~5.725GHz 5.725~5.85GHz

Ant ( L ) PCB ant. NA 0.34 dBi -2.8 dBi -2.72 dBi -1.29 dBi -0.19 dBi

Ant ( R ) PCB ant. NA 1.15 dBi -0.58 dBi -0.45 dBi 3.24 dBi 1.78 dBi

Canadian Department of Communications Compliance Statement (for Canada)

This Class B digital apparatus complies with Canadian ICES-003.

English-3

CE statement

Europe – EU Declaration of Conformity

This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test

methods have been applied in order to prove presumption of conformity with the essential requirements of

the R&TTE Directive 1999/5/EC:

- EN 60950-1:2006+A11:2009+A1:2010+A12:2011

- EN62311 : 2008

- EN 300 328 V1.8.1: 2012

- EN 301 893 V1.7.1: 2012

- EN 301 489-1 V1.9.2: 2011

- EN 301 489-17 V2.2.1: 2012

In Italy the end-user should apply for a license at the national spectrum authorities in order to obtain

authorization to use the device for setting up outdoor radio links and/or for supplying public access to

telecommunications and/or network services.

 

Česky

[Czech]

NECDisplaySolutions,Ltd.tímtoprohlašuje,žetentoWirelessDisplayMediaPlayer

(Model:SB-06WC)jeveshoděsezákladnímipožadavkyadalšímipříslušnýmiustanoveními

směrnice1999/5/ES.

Dansk

[Danish]

UndertegnedeNECDisplaySolutions,Ltd.erklærerherved,atfølgendeudstyrWireless

DisplayMediaPlayer(Model:SB-06WC)overholderdevæsentligekravogøvrigerelevante

kravidirektiv1999/5/EF.

Deutsch

[German]

HiermiterklärtNECDisplaySolutions,Ltd.,dasssichdasGerätWirelessDisplayMediaPlayer

(Model:SB-06WC)inÜbereinstimmungmitdengrundlegendenAnforderungenunddenübrigen

einschlägigenBestimmungenderRichtlinie1999/5/EGbendet.

Eesti

[Estonian]

KäesolevagakinnitabNECDisplaySolutions,Ltd.seadmeWirelessDisplayMediaPlayer

(Model:SB-06WC)vastavustdirektiivi1999/5/EÜpõhinõuetelejanimetatuddirektiivist

tulenevateleteisteleasjakohastelesätetele.

English Hereby,NECDisplaySolutions,Ltd.,declaresthatthisWirelessDisplayMediaPlayer

(Model:SB-06WC)isincompliancewiththeessentialrequirementsandotherrelevant

provisionsofDirective1999/5/EC.

Español

[Spanish]

PormediodelapresenteNECDisplaySolutions,Ltd.declaraqueelWirelessDisplay

MediaPlayer(Model:SB-06WC)cumpleconlosrequisitosesencialesycualesquieraotras

disposicionesaplicablesoexigiblesdelaDirectiva1999/5/CE.

Ελληνική

[Greek]

ΜΕΤΗΝΠΑΡΟΥΣΑNECDisplaySolutions,Ltd.ΔΗΛΩΝΕΙΟΤΙWirelessDisplayMediaPlayer

(Model:SB-06WC)ΣΥΜΜΟΡΦΩΝΕΤΑΙΠΡΟΣΤΙΣΟΥΣΙΩΔΕΙΣΑΠΑΙΤΗΣΕΙΣΚΑΙΤΙΣΛΟΙΠΕΣ

ΣΧΕΤΙΚΕΣΔΙΑΤΑΞΕΙΣΤΗΣΟΔΗΓΙΑΣ1999/5/ΕΚ.

Français

[French]

ParlaprésenteNECDisplaySolutions,Ltd.déclarequel'appareilWirelessDisplayMedia

Player(Model:SB-06WC)estconformeauxexigencesessentiellesetauxautresdispositions

pertinentesdeladirective1999/5/CE.

Italiano

[Italian]

ConlapresenteNECDisplaySolutions,Ltd.dichiarachequestoWirelessDisplayMedia

Player(Model:SB-06WC)èconformeairequisitiessenzialiedallealtredisposizionipertinenti

stabilitedalladirettiva1999/5/CE.

Latviski

[Latvian]

AršoNECDisplaySolutions,Ltd.deklarē,kaWirelessDisplayMediaPlayer(Model:SB-06WC)

atbilstDirektīvas1999/5/EKbūtiskajāmprasībāmuncitiemartosaistītajiemnoteikumiem.

Lietuvių

[Lithuanian]

ŠiuoNECDisplaySolutions,Ltd.deklaruoja,kadšisWirelessDisplayMediaPlayer(Model:SB-

06WC)atitinkaesminiusreikalavimusirkitas1999/5/EBDirektyvosnuostatas.

English-4

Nederlands

[Dutch]

HierbijverklaartNECDisplaySolutions,Ltd.dathettoestelWirelessDisplayMediaPlayer

(Model:SB-06WC)inovereenstemmingismetdeessentiëleeisenendeandererelevante

bepalingenvanrichtlijn1999/5/EG.

Malti

[Maltese]

Hawnhekk,NECDisplaySolutions,Ltd.,jiddikjaralidanWirelessDisplayMediaPlayer

(Model:SB-06WC)jikkonformamal-ħtiġijietessenzjaliumaprovvedimentioħrajnrelevantili

hemmd-Dirrettiva1999/5/EC.

Magyar

[Hungarian]

Alulírott,NECDisplaySolutions,Ltd.nyilatkozom,hogyaWirelessDisplayMediaPlayer

(Model:SB-06WC)megfelelavonatkozóalapvetõkövetelményeknekésaz1999/5/ECirányelv

egyébelõírásainak.

Polski

[Polish]

NiniejszymNECDisplaySolutions,Ltd.oświadcza,żeWirelessDisplayMediaPlayer

(Model:SB-06WC)jestzgodnyzzasadniczymiwymogamiorazpozostałymistosownymi

postanowieniamiDyrektywy1999/5/EC.

Português

[Portuguese]

NECDisplaySolutions,Ltd.declaraqueesteWirelessDisplayMediaPlayer(Model:SB-06WC)

estáconformecomosrequisitosessenciaiseoutrasdisposiçõesdaDirectiva1999/5/CE.

Slovensko

[Slovenian]

NECDisplaySolutions,Ltd.izjavlja,dajetaWirelessDisplayMediaPlayer(Model:SB-06WC)

vskladuzbistvenimizahtevamiinostalimirelevantnimidoločilidirektive1999/5/ES.

Slovensky

[Slovak]

NECDisplaySolutions,Ltd.týmtovyhlasuje,žeWirelessDisplayMediaPlayer(Model:SB-

06WC)spĺňazákladnépožiadavkyavšetkypríslušnéustanoveniaSmernice1999/5/ES.

Suomi

[Finnish]

NECDisplaySolutions,Ltd.vakuuttaatätenettäWirelessDisplayMediaPlayer(Model:SB-

06WC)tyyppinenlaiteondirektiivin1999/5/EYoleellistenvaatimustenjasitäkoskevien

direktiivinmuidenehtojenmukainen.

English-5

Safety Precautions and Maintenance

For optimum performance, please note the following when setting up and using the Wireless Display

Media Player.

Please adhere to the precautions stated in the user’s manual of the projector or display to be

connected to this product.

In the event of a fault occurring, pull out the power plug of the display or projector

immediately!

Ifnot,thismayresultinreorelectricshock.Pulloutthepowerplugfromtheelectricaloutletimmediately.Consult

yourdealerforrepairssubsequently.

Do not use when there is a failure (e.g. the screen does not appear etc.) or when there is

smoke or strange odors

Thismayresultinreorelectricshock.

Do not place foreign objects inside the product

Donot placeforeignobjectsinsidethe devicewhen mountingthedisplay orprojector tothisproduct.This may

resultinreorelectricshock.

Do not disassemble or modify the product

Thismayresultininjury,reorelectricshock.

Do not touch the power cable when there is thunder

Donottouchthepowercableofthedisplayorprojectorwhenthereisthunder.Thismayresultinelectricshock.

Do not replace this product with the power cable still connected to the electrical outlet

Donotreplacethisproductwiththepowercableofthedisplayorprojectorstillconnectedtotheelectricaloutlet.

Thismayresultinafailure.

Do not use this product in a location where it may get wet

Cutoffthepowersupplyimmediatelyifwaterweretogetinsidethisproduct,thedisplayorprojectorandconsult

yourdealerafter pullingout thepower cablefromthe electricaloutlet. Ifnot, thismayresult ina failure,re or

electricshock.

Do not use the wireless LAN unit as a life-saving device or equipment

Thewireless LANunit attachedtothisproductis notdesigned tobeusedasa life-savingequipment ordevice

suchas amedical device,nuclear powerequipment /device, aeronauticaldevice, transportequipment /device

orequipment/devicethatrequiresahighlevelofreliability,norisitdesignedtobeusedincombinationwithsuch

devices.

• DonotusethewirelessLANunitnearpeoplewhoarettedwitharticialpacemakers.

• DonotusethewirelessLANunitmedicaldevices.Thismayresultinelectromagneticinterferenceinthemedical

deviceandposearisktohumanlife.

English-6

Information

Corresponding regions, corresponding countries of Wireless LAN Unit

Please refer to our company website for the list of regions and countries where the use of the product

is supported. Please duly note that use of the product in a region or country which does not support its

use may contravene the laws on electromagnetic transmissions in that country.

URL: http://www.nec-display.com/ap/en_projector/others/wlan.html

GPL/LGPL Software Licenses

The product includes software licensed under GNU General Public License (GPL), GNU Lesser

General Public License (LGPL), and others.

For more information on each software, see “readme.pdf” inside the “about GPL&LGPL” folder on the

supplied CD-ROM.

About Trademarks

• Intel and the Intel

logo are trademarks of Intel Corporation in the US and/or other countries.

• Windows

is a registered trademark of Microsoft Corporation in the US and/or other countries.

• SD and SDHC are the trademarks of SD-3C, LLC.

WEEE Mark (European Directive 2012/19/EC)

Within the European Union

EU-wide legislation, as implemented in each Member State, requires that waste electrical

and electronic products carrying the mark (left) must be disposed of separately from

normal household waste. This includes monitors and electrical accessories, such as

signal cables or power cords. When you need to dispose of your NEC display products,

please follow the guidance of your local authority, or ask the shop where you purchased

the product, or if applicable, follow any agreements made between yourself and NEC.

The mark on electrical and electronic products only applies to the current European

Union Member States.

Outside the European Union

If you wish to dispose of used electrical and electronic products outside the European Union, please

contact your local authority so as to comply with the correct disposal method.

NOTE:

• Unauthorized reproduction of the information in this manual in part or in whole is strictly prohibited.

• The information in this manual may differ from the information shown in the actual display screen.

• The information in this manual is subject to future changes without notice.

• While every endeavor has been made to ensure the information in this manual is accurate and

complete, please contact us if you ﬁnd any errors or omissions.

English-7

Accessory

The following accessories are enclosed with the product at the time of purchase.

Please contact your dealer if you ﬁnd any of the accessories missing or damaged.

• SB-06WC Main unit

• Wireless LAN unit

• Setup manual

• User’s manual (CD-ROM)

• USB extension cable

• SD memory card (capacity: 8GB)

• SD memory card protector

• Wireless LAN unit protector

• Wireless LAN unit adapter

• Screws (for adapter)

SB-06WCMainunit WirelessLANunit SDmemorycard(capacity:8GB)

Setup

Manual

User’smanual(CD-ROM) Setupmanual USBextensioncable

WirelessLANunitadapter

Screws(foradapter)

WirelessLANunitprotector SDmemorycardprotector

English-8

Part Names

SB-06WC Main unit

Wireless LAN unit

Indicator

Display the status of the wireless LAN unit.

• Lights up in blue: Intel

WiDi connection in progress

• Flashes in blue: Intel

WiDi connection in progress (data transmission in progress)/standby for

connection

LAN Port (RJ-45)

This is used when functions are expanded in

future.

Reset button

This resets the product.

USB Port 1

This is used to connect the enclosed wireless

L AN unit or a commercially-ava ilable USB

memory.

Indicator

Displays the status of the product.

When using the Intel

WiDi function:

•Lights up in green: Intel

WiDi connection in progress

(communication in progress)

•Flashes in green: Intel

WiDi connection preparation in

progress

•Lights up in orange: Intel

WiDi standby for connection

(connection preparation completed)

Media player function, setting screen:

•Lights up in green: Power ON

Common

•Lights up in red: System startup in progress

•Flashes in red: System error

Firmware update error

•Flashes in orange: Firmware update in progress

Slot for the SD memory card

Connect the SD memory card.

USB Port 2

This is used to connect the enclosed wireless

L AN unit or a commercially-ava ilable USB

memory.

English-9

Connections

Insert the enclosed wireless LAN unit or a commercially-available USB memory or SD memory card

into the product.

• Insert the wireless LAN unit into the product ﬁrst before turning on the power supply.

• Insert the SD memory card into the slot for the SD memory card so that the label faces the top of the

product.

• Please refer to the paragraph on “Speciﬁcations” for the speciﬁcations of the USB memory, SD memory

card that can be used.

NOTE:

• The Intel

WiDi function cannot be used if the wireless LAN unit is connected after the product is powered up.

• The enclosed wireless LAN unit and USB memory can be used when inserted into either USB Port 1 or USB Port 2.

Enclosed wireless LAN unit or

commercially-available USB memory

SD memory card

English-10

Installation

Attach this product to the display main unit or projector main unit. Depending on the display, an

optional slot board conversion adapter SB-02AM may be required. Refer to the Quick Start Guide of

the SB-02AM on how to install the SB-02AM.

Check with your dealer for the compatible displays and projectors that can be used.

CAUTION:

• During installation, do not leave any foreign objects inside the display or projector.

Do not drop the product, screws and optional slot cover as well.

1. Remove the two screws on the optional slot of slot 2 type to remove the

optional slot cover.

For displays, remove the handle where necessary.

2. Attach this product to a display or projector.

CAUTION:

• When attaching this product to a display, make sure

the top side of this product (side opposite to the side

where the label is pasted) faces the rear of the display.

Damages may result if it is inserted in the opposite

direction.

• When attaching this product to a projector, make

sure the top side of this product faces the top of the

projector. Damages may result if it is inserted in the

opposite direction.

3. Securely fasten this product with the screws on the optional slot.

(tightening torque 49.0N･cm - 68.6N･cm)

Securely fasten the handle with the screws if the handle of the display is

removed. See the manual of the display for the tightening torque of the

handle screws.

CAUTION:

• Do not apply a force higher than the specified force when tightening the

screws. This may result in damages to the screw holes.

Rear of the display

Top side of

this product

English-11

Installation of protector for wireless LAN unit

1. Remove the screws for securing the protector at

the top of the USB Port where the wireless LAN

unit is going to be connected.

NOTE:

• The wireless LAN unit can be inserted into either

USB Port 1 or USB Port 2.

CAUTION:

• Do not lose the removed screws. Do not leave them

inside the device as well.

2. Insert the wireless LAN unit to the USB Port.

3. Attach the protector for the wireless LAN unit. At

this point, ﬁt the two studs on the protector into

the two square holes on the front panel of the

product.

4. Securely fasten the protector with the screws.

(tightening torque 4.7N•cm - 7.3N•cm)

CAUTION:

• Do not apply a force higher than the speciﬁed force

when tightening the screws. This may result in

damages to the screw holes.

English-12

Installation of protector for SD memory card

1. Remove the screws for securing the protector at the

top of the slot for the SD memory card.

CAUTION:

• Do not lose the removed screws. Do not leave them

inside the device as well.

2. Insert the SD

memory card

into the slot for the SD

memory card

3. Attach the protector for the SD memory card. At

this point, ﬁt the two studs on the protector into the

square holes on the front panel of the product.

4. Securely fasten the protector with the screws.

(tightening torque 4.7N•cm - 7.3N•cm)

CAUTION:

• Do not apply a force higher than the speciﬁed force

when tightening the screws. This may result in damages

to the screw holes.

English-13

Installation of adapter for wireless LAN unit

Depending on the model of the display, when an external speaker is ﬁtted, the wireless LAN unit may

interfere with the external speaker, making direct connection to the product impossible. In this case, use

an adapter for the wireless LAN unit (hereinafter “adapter”) and a USB extension cable to install the wireless

LAN unit to the back of the display etc.

1. Install the adapter such that the indicator on the wireless

LAN unit is on the side of the screw holes on the adapter.

Indicator

Screw hole

2. Securely fasten the adapter with the enclosed adapter screws.

(tightening torque 19.6N•cm - 29.4N•cm)

CAUTION:

• Do not apply a force higher than the speciﬁed force when

tightening the screws. This may result in damages to the screw

holes.

3. Connect the USB extension cable to the USB Port of the product and the USB port of the wireless LAN unit.

4. Peel off the cover of the two-sided tape at the bottom of the adapter and press it strongly against the rear of

the display to secure the adapter.

CAUTION:

• Secure the adapter only after you have carefully considered the installation position.

• Install the adapter on a horizontal surface.

• Install the adapter in a location that will not impose stresses on the USB extension cable.

• Do not install the adapter on top of the heat release outlet on the display.

• Remove all moisture, dust, oil, etc., from the location ﬁrst before pasting the adapter at the location. Do not allow the

sticky surface to get into contact with your hands or dust. This will result in a drop in the adhesive strength.

• The two-sided tape cannot be peeled off and used again. Do not use it again once it is peeled off.

• Be careful when removing an adapter that has been attached using two-sided tape. Using excessive force may result in

damages to the adapter.

English-14

Basic Operation

Preparations

For displays

•Remote control enclosed with the display

For projectors

•Remote control enclosed with the projector

•Dedicated remote control for operating the product

Display remote control

POWER ON button

Turn on the power of the display.

STANDBY button

Turn off the power of the display.

SWITCH INPUT button (OPTION)

Switch the video input of the display to the product.

SWITCH AUDIO INPUT button (AUDIO INPUT)

Switch the audio input of the display. Select [OPTION] when outputting

the audio of the product.

OPTION MENU button

Used for the menu operations of the product.

NUMBER button, PLAY button

U s e d f o r t h e i n p u t o f n u m b e r s . W h e n p l a y i n g c o n t e n t s

w i t h t h e m e d i a p l a y e r , t h e f u n c t i o n s a r e a s f o l l o w s .

1: Back, 2: Playback, 3: Skip, 5: Stop, 6: Pause.

MENU button

Turn the display OSD screen ON/OFF.

UP button (

)

Move to the setting at the top of the menu screen.

DOWN button (

)

Move to the setting at the bottom of the menu screen.

MINUS button ( - )

Move to the setting on the left of the menu screen.

Delete the number in front when inputting numbers.

PLUS button ( + )

Move to the setting on the right of the menu screen.

SET button

Conﬁrm the setting in the menu screen.

EXIT button

Return to the previous menu screen.

NOTE:

• The remote control enclosed with the display differs depending on the model. Use the OPTION button for menu

operations of the product if there is no OPTION MENU button.

• See the manual of the display for button operations other than the above.

English-15

Dedicated remote control for the projector

NUMBER button, PLAY button

Used for the input of numbers.

When playing contents with the media player, the functions are

as follows. 1: Back, 2: Playback, 3: Skip, 5: Stop, 6: Pause.

MENU button

Used for the menu operations of the product.

UP button (

)

Move to the setting at the top of the menu screen.

DOWN button (

)

Move to the setting at the bottom of the menu screen.

LEFT button (

)

Move to the setting on the left of the menu screen.

Delete the number in front when inputting numbers.

RIGHT button (

)

Move to the setting on the right of the menu screen.

SET button

Conﬁrm the setting in the menu screen.

EXIT button

Return to the previous menu screen.

NOTE:

•Use the remote control enclosed with the projector to turn the power of the projector ON/OFF.

•See the manual of the projector regarding the button operations of the remote control enclosed with the projector.

•Check with your dealer regarding the dedicated remote control for the projector.

EX IT

PO WE R ON

STAND BY

English-16

Operations and settings of the display and projector

For displays

(1) Connect the power cable to the display ﬁrst before connecting to the electrical outlet.

(2) Turn on the main power of the display.

(3) The video input of the display changes to the product upon pressing the OPTION button on the remote

control of the display.

(4) The audio input changes upon pressing the AUDIO INPUT button on the remote control of the display.

Set the input to “OPTION” to select the audio of the product.

(5) Use the display OSD function to set the “AUDIO” setting under “OPTION SETTING” to [DIGITAL].

For projectors

(1) Connect the power cable to the projector ﬁrst before connecting to the electrical outlet.

(2) Turn on the main power of the projector.

(3) The video input of the projector changes to the product upon pressing the SLOT button on the remote

control of the projector.

NOTE:

• Depending on the model, the projector may not support the audio output of the product. Please check with your dealer

for details.

Product Operations

Use the remote control enclosed with the display to operate the product when using a display.

Use the dedicated remote control for the projector to operate the product when using a projector.

Selection of Functions

The “Home” Screen is displayed during startup

in initial state. Select the function using the -/+

buttons on the remote control and press the SET

button to move to the execution screen of each

function.

Press the OPTION MENU button* on the remote

control to return to the previous screen.

＊ * : The remote control of the display differs depending on the

model. Use the OPTION button if there is no OPTION MENU

button on the remote control.

＊ * : Use the MENU button when using a dedicated remote control

for the projector.

Setting the display language

The display language in the initial state is “English”. Change the display language where necessary.

(1) Select [Settings] in the home screen and press the

SET button on the remote control.

(2) Select [General] and press the SET button when

the Settings menu appears.

(3) Select [Language] and press the SET button to

display a list of the display languages, and use

the

/ buttons to select the desired display

language before pressing the SET button.

(4) Select [Done] and press the SET button to switch

the display language.

Screen Saver

• The screen saver screen will appear if there are no operations on the home screen or Intel

WiDi

standby screen for 30 or more seconds. Press the EXIT button to return to the previous screen from

the screen saver screen.

English-17

Function Controls

1. Wireless Display

Video from a computer that supports Intel

Wireless Display (hereinafter “Intel

WiDi”) can be received

and displayed on a display or projected with a projector.

Computer that supports Intel

Wireless Display

Projector or display

which is connected to this product

NOTE:

• Refer to the user’s manual of the computer and the Intel website for details on the use and update of the Intel

WiDi

software.

Connection Method

Explains the operations using Windows

7, Windows

(1) Select [Intel® WiDi] from the home screen and

press the SET button.

(2) The right screen is displayed when the upon

completing the connection preparation of the

product.

English-18

(3) Start up the Intel

WiDi software with the computer.

(4) Operate the Intel

WiDi software to select “SB06WC”

(

adapter name of the product when shipped from the factory

)

and then click [Connect].

If the adapter name has been changed, select the

speciﬁed adapter, and then click [Connect].

NOTE:

• Depending on the operating environment, the product

“SB06WC” may not be detected. In that case, click [Scan] to

scan again.

• For Windows

8.1, open the Charm bar, select [Devices] –

[Project] – [Add a wireless display], and then click “SB06WC”.

(5) When connecting the product to a computer for the ﬁrst time, the security code will be displayed in

the standby screen on the display end. Enter this security code in the Intel® WiDi software and click

[Continue].

(6) At the end of the connection processing, the display screen of the computer will appear in the display.

(7) Click [Disconnect] in the Intel

WiDi software to stop the connection with the Intel

WiDi software.

How to adjust the size of the computer image displayed in the display/projector

When black edges appear around the screen without the computer display screen appearing correctly

in the screen of the display/projector, the size of the image can be adjusted using the following method.

(1) Select [Settings]-[Picture and Sound] in the Intel

WiDi software.

(2) Click [Adjust cropping] in the [Settings - Picture and Sound] screen.

(3) Click the [+]/[-] icons in the [Setting – Adjust Edge Visibility] screen to adjust the image size.

La pagina sta caricando ...

NEC SB-06WC Manuale utente

Marca: NEC

Modello: SB-06WC

Categoria: Proiettori

Tipo: Manuale utente

Questo manuale è adatto anche per

Car Stereo System SB-06WC

Scarica il pdf

rapporto

in altre lingue

English: NEC SB-06WC User manual

NEC SB-06WC Manuale utente

Questo manuale è adatto anche per

NEC SB-06WC Manuale utente

in altre lingue

Documenti correlati

Altri documenti