Quickie EIZ9 Manuale del proprietario

Categoria
Passeggini
Tipo
Manuale del proprietario

Questo manuale è adatto anche per

O w n e r s M a n u a l
Quickie
®
SR45
*
with transit option
*
without transit option
Supplier:
User:
This manual must be given to the user of this wheelchair.
Before using this wheelchair read this entire manual and save for future
reference.
SECTION
ENGLISH
SR45
M a n u a l d e I n s t r u c c i o n e s
Distribuidor:
Este manual debe ser entregado al pasajero de esta silla de ruedas.
Pasajero:
Antes de usar esta silla de ruedas, lea este manual en su totalidad y
guárdelo para futura referencia.
M o d e d e m p l o i
Cada una de las sillas se envía con un manual de instrucciones en inglés. El manual en español o
francés está disponible en formato PDF en nuestra página en Internet: www.SunriseMedical.com.
Ingrese a la página del producto específico para descargar el manual, o comuníquese con el
proveedor autorizado de Sunrise Medical.
Fournisseur:
Ce manuel doit être remis à l’utilisateur / utilisatrice de ce fauteuil
roulant.
Utilisateur / Utilisatrice:
Avant d’utiliser ce fauteuil roulant, lisez entièrement ce manuel
et conservez le pour le consulter ultérieurement.
B e n u t z e r a n w e i s u n g e n
Ogni carrozzina è accompagnata da un manuale d’uso scritto in inglese. La versione tradotta è
reperibile nel formato PDF sul nostro sito web: www.SunriseMedical.com. Visitare la pagina del
prodotto specifico da scaricare, o contattare il fornitore Sunrise Medical autorizzato.
Fachhändler :
Dieses Handbuch muss dem Benutzer des Rollstuhls ausge-
händigt werden.
Benutzer :
Vor dem Gebrauch des Rollstuhls lesen Sie bitte das gesamte
Handbuch, und bewahren Sie es für zukünftigen Bedarf auf.
Zum Lieferumfang jedes Rollstuhls gehört ein Bedienungshandbuch in englischer Sprache. Diese
übersetzte Version des Handbuchs steht im PDF-Format auf unserer Website zur Verfügung:
www.SunriseMedical.com. Gehen Sie bitte zu der betreffenden Produktsite für den Download
der übersetzten Version oder wenden Sie sich an Ihren authorisierten Sunrise Medical
Fachhändler.
M a n u a l e d ' u s o
Chaque fauteuil est livré avec un manuel d’instructions en anglais. Les versions en espagnol et en
francais sont à ançais est à votre disposition en format PDF sur le site: www.SunriseMedical.com.
Veuillez vous rendre à la page de votre produit pour télécharger le manuel dans la langue
souhaitée, ou contactez un fournisseur agréé Sunrise Medical.
Rivenditore :
Il presente manuale va consegnato all'utente della carrozzina.
Utente :
Prima di usare la carrozzina, leggere il presente manuale per intero e
conservarlo per riferimento futuro.
118611 Rev. D
2
SR45
I. INTRODUCTION
SUNRISE MEDICAL LISTENS
Thank you for choosing a Quickie SR45 tilt in space wheelchair. We
want to hear your questions or comments about this manual, the
safety and reliability of your chair, and the service you receive from
your Sunrise supplier. Please feel free to write or call us at the
address and telephone number below:
SUNRISE MEDICAL
Customer Service Department
2842 Business Park Avenue
Fresno, CA 93727
(800) 333-4000
Be sure to return your warranty card, and let us know if you change
your address. This will allow us to keep you up to date with informa-
tion about safety, new products and options to increase your use and
enjoyment of the wheelchair. If you lose your warranty card, call or
write and we will gladly send you a new one
.
FOR ANSWERS TO YOUR QUESTIONS
Your authorized supplier knows your wheelchair best, and can answer
most of your questions about chair safety, use and maintenance. For
future reference, fill in the following:
Supplier:
___________________________________________________________________________
Address: ___________________________________________________________________________
______________________________________________________________________________________
Telephone: ________________________________________________________________________
Serial #:_____________________________ Date/Purchased: ________________________
ADDITIONAL INFORMATION YOU SHOULD KNOW
No component of this chair was made with Natural Rubber Latex.
118611 Rev. D
3
SR45
II.I. TABLE OF CONTE
I.I. I RODUCTION ...........................................................................2
II.II. TABLE OF CONT S.................................................................3
III.III. R CHAIR AND ITS PARTS..................................................4
IV.IV. NOTIC READ BEFORE USE ....................................................4
V.V. GE RAL WARNINGS .................................................................5
A.Weight limits................................................................................5
B. Intended Use................................................................................5
C. Attendants and Caregivers......................................................5
D. Accessories
E. Know your Chair........................................................................5
F. Reduce the risk of an Accident ...............................................5
G.Safety Checklist...........................................................................5
H.Changes and Adjustments.........................................................5
I. Environmental Conditions........................................................6
J. Terrain ...........................................................................................6
K.Street Use ...................................................................................6
L. Motor Vehicle Safety...................................................................6
M.When you need help.................................................................6
VI. SAFETY WARNINGS: FALLS & TIP-OVERS.............................7
A.Center of Balance.......................................................................7
B. Dressing or Changing Clothes ................................................7
C.Obstacles......................................................................................7
D.Front Caster Lift.........................................................................7
E. Reaching or Leaning...................................................................7
F. Moving Backward.........................................................................7
G.Escalators......................................................................................8
H. Ramps, Slopes, and Sidehills.....................................................8
I. Transfer .........................................................................................8
J. Curbs and Single Steps ...............................................................9
K.Climbing a Curb or Single Step...............................................9
L. Descending a Curb or Single Step .........................................9
M.Stairs............................................................................................10
N. Climbing Stairs.........................................................................10
O. Descending Stairs ....................................................................10
P. Tilt Use .......................................................................................10
VII.VII RNINGS: COMPONENTS & OPTIONS..........................11
A.Anti-tip Tubes ............................................................................11
B. Armrests.....................................................................................11
C.Push Handles .............................................................................11
D.Stroller Handle..........................................................................11
E. Cushions.....................................................................................11
F. Fasteners ....................................................................................11
G. Footrests....................................................................................11
H Pneumatic Tires.........................................................................11
I. Positioning Belts........................................................................12
J. Quick Release Axle..................................................................12
K.Rear Axles ..................................................................................12
L. Rear Wheel Locks....................................................................12
M. Modified Seat Systems............................................................12
VIII.VI SE AND MAINTENANCE ......................................................13
A. Introduction ............................................................................13
B. Critical Maintenance Tips .......................................................13
C.Maintenance Chart...................................................................13
D.Cleaning ......................................................................................13
E. Troubleshooting Chart............................................................13
F. To Mount and Remove Rear Wheels....................................14
G.Cushion Installation .................................................................14
H. Wheel Locks.............................................................................14
I. Anti-Tip Tubes-Rear...................................................................14
J. Dual-Post Armrests...................................................................15
K.Height-Adjustable Armrests...................................................15
L. Swing-away Hangers/Footrests..............................................16
M.Articulating Legrest..................................................................16
N.Elevating Legrest.......................................................................16
O.Tilt-in-Space Mechanism.........................................................17
P. Stroller Handle Extension ......................................................17
Q.Reclining Back ...........................................................................17
R. Check-out ..................................................................................17
IX.IX. DE R SERVICE & ADJUSTMENT.........................................18
A.Dealer Service Introduction..................................................18
B. Critical Maintenance Tips .......................................................18
C.Cleaning......................................................................................18
D.Rear Axle....................................................................................18
E. Wheel Locks .............................................................................19
F. Single-Post Armrest Receiver................................................19
G.Swing-Away Height Adjustment............................................19
H.Footplate Adapter Bracket.....................................................20
I. Elevating /Articulating Legrest...............................................20
J. Tilt-in-space Mechanism .........................................................21
K.Backrest and Stroller Handle ................................................21
L. Caster/Fork Assembly .............................................................22
M.Frame Depth .............................................................................22
N.Frame Width..............................................................................23
O.Seat Pan ......................................................................................23
P. Carriage ......................................................................................24
Q.Attendant Wheel Lock Installation ......................................25
R. Lap Belt Instructions................................................................26
S.Check-Out...................................................................................26
X. SUNRISE LIMITED WARRANTY ..............................................27
T
.
Limb Support...............................................................................26
118611 Rev. D
4
SR45
III. YOUR CHAIR AND ITS PARTS
IV. NOTICE– READ BEFORE USE
A. CHOOSE THE RIGHT CHAIR & SAFETY OPTIONS
Sunrise provides a choice of many wheelchair styles to meet your needs.
This product is intended for single person use only. Final selection of the
type of wheelchair, options and adjustments rests solely with you and your
health care professional. Choosing the best chair and set-up for your safety
depends on such things as:
1. Your disability, strength, balance and coordination.
2. The types of hazards you must overcome in daily use (where you
live and work, and other places you are likely to use your chair).
3. The need for options that will improve your positioning, safety and
comfort (such as anti-tip tubes, positioning belts, or special seating
systems).
B. REVIEW THIS MANUAL OFTEN
Before using this chair you, and each person who may assist you, should
read this entire manual and make sure to follow all instructions. Review the
warnings often, until they are second nature to you.
C. WARNINGS
The word
“WARNING”
refers to a hazard or unsafe practice that may
cause
severe injury or death
to you or to other persons. The “Warnings”
are in Three main sections, as follows:
1. V– GENERAL WARNINGS
Here you will find a safety checklist and a summary of risks you
need to be aware of before you ride this chair.
2. VI– SAFETY WARNINGS: FALLS & TIP-OVERS
Here you will learnabout practices for the safe use of your chair, and
how to avoid a fall or tip-over while you perform daily activities in
your chair.
3. VII– WARNINGS– COMPONENTS & OPTIONS
Here you will learn about the components of your chair and options
you can select for safety. Consult your Premium Retailer and your
health care advisor to help you choose the best set-up and options
for safe use.
NOTE–
Where they apply, you will also find “Warnings” in other sections
of this manual. Heed all warnings in this section. If you fail to do
so a fall, tip-over or loss of control may occur and cause severe
injury to the rider or others.
1. Contour back (Optional)
2. Dual Post Armrest
3. Cushion (Optional)
4. Footrest Hanger
5. Footplate
6. Carriage
7. Caster fork
8. Caster tire
9. Adjustable Strut Tube
10. Wheel Lock
11. 12" Rear wheel
12. Back Cane
13. Tilt Lever
14. Push handle
NOTE– Not all options are available on
both the Quickie SR45. Please
refer to the order form for
specific option availability.
Quickie SR45
1
8
2
3
4
5
6
7
9
10
12
11
13
14
118611 Rev. D
5
SR45
V. GENERAL WARNINGS
A. WEIGHT LIMITS
WARNING
NEVER exceed the weight limit specified by Sunrise Medical. The weight
capacity provided by your manufacturer is for the combined weight of a rider
and items carried using on-board storage. If you do exceed the weight limit,
damage to your chair, a fall, tip-over or loss of control may occur and cause
severe injury to the rider or others.
Weight Capacities
Quickie SR45 - 265lbs/(120Kg).
B. INTENDED USE
The Quickie SR45 Series of wheelchair's intended use is to provide mobili-
ty to persons limited to a sitting position.
WARNING
DO NOT use this device for purposes other than what is intended by the
manufacturer
1. The wheelchiar is not designed for weight training and is unsafe for
use as a seat while weight training. Weight training from the wheel-
chair substantially changes the stability of the chair and may cause
tipping.
2. DO NOT stand on the frame of the wheelchair.
3. NEVER allow someone to stand on your chair or use it as a step
ladder.
4. This chair is designed for a single rider only.
5. Unauthorized modifications and use of parts or accessories not sup-
plied or approved by Sunrise Medical may change the chair struc-
ture. This will void the warranty and may cause a safety hazard. If
the warning is ignored, damage to your chair, and the potential
severe injury of the person using the chair for unintended purposes
can occur.
C. ATTENDANTS AND CAREGIVERS
WARNING
Before you assist a rider, be sure to read all warnings contained in this
manual, and follow all instructions that apply. Be aware that after consulting
a healthcare advisor, you will need to learn safe and proven body mechanics
to use and create assistive methods best suited to your abilities.
D. ACCESSORIES
WARNING
Unauthorized modifications or use of parts, or accessories not supplied or
approved by Sunrise Medical may change the chair structure. This will void
the warranty and may cause a safety hazard.
Some problems that may occur, but are not limited to:
1. Incorrect Wheels and/or tires that put the rider at risk of a fall or tip-
over.
2. Adding a component to the frame, changing the structural integrity of
the chair.
3. Any modification or disassembly can potentially create an unsafe situa-
tion where rider and/or attendant are put at risk.
E. KNOW YOUR CHAIR
WARNING
Every wheelchair is different. Take the time to learn the feel of this chair
before you begin riding. Start slowly, with easy, smooth strokes. If you are
used to a different chair, you may use too much force and tip over. If you
use too much force, damage to your chair, a fall, tip-over or loss of control
may occur and cause severe injury to the rider or others.
F. REDUCE THE RISK OF AN ACCIDENT
WARNING
1. BEFORE riding, you should be trained in the safe use of this chair by
your health care advisor.
2. Practice bending, reaching and transfers until you know the limit of
your ability. Have someone help you until you know what can cause
a fall or tip-over and how to avoid doing so.
3. Be aware that you must develop your own methods for safe use
best suited to your level of function and ability.
4. NEVER try a new maneuver on your own until you are sure you can
do it safely.
5. Get to know the areas where you plan to use your chair. Look for
hazards and learn how to avoid them.
6. Sunrise recommends using anti-tip tubes in evey circumstance.
If you fail to heed these warnings, damage to your chair, a fall, tip-over or loss
of control may occur and cause severe injury to the rider or others.
G. SAFETY CHECKLIST
WARNING
Before Each Use Of Your Chair:
1. Make sure the chair rolls easily and that all parts work smoothly.
Check for noise, vibration, or a change in ease of use. (They may
indicate low tire pressure, loose fasteners, or damage to your chair).
2. Immediately repair any problem. Your authorized supplier can help
you find and correct the problem.
3. Check to see that both quick-release rear axles are locked. When
locked, the axle button will “pop out” fully. If not locked, the wheel
may come off and cause you to fall.
4. If your chair has anti-tip tubes, lock them in place.
If you fail to heed these warnings, damage to your chair, a fall, tip-over or loss
of control may occur and cause severe injury to the rider or others.
H. CHANGES & ADJUSTMENTS
WARNING
1. See your healthcare advisor and have them adjust seating compo-
nents any time a change or adjustment needs to be made.
2. Unauthorized modifications or use of parts not supplied or
approved by Sunrise may change the chair structure. This will void
the warranty and may cause a safety hazard.
If you fail to heed these warnings, damage to your chair, a fall, tip-over or loss
of control may occur and cause severe injury to the rider or others.
WARNING
If your chair is
NOT
equipped with the Transit Option:
1. NEVER let anyone sit in this chair while in a moving vehicle.
a. ALWAYS move the rider to an approved vehicle seat.
b. ALWAYS secure the rider with proper motor vehicle restraints.
2. In an accident or sudden stop the rider may be thrown from the
chair. Wheelchair seat belts will not prevent this, and further injury
may result from the belts or straps.
3. NEVER transport this chair in the front seat of a vehicle. It may shift
and interfere with the driver.
4. ALWAYS secure this chair so that it cannot roll or shift.
5. Do not use any chair that has been involved in a motor vehicle acci-
dent. The frame and/or components may have been changed due to
the accident. Such items could be, but are not limited to: bent, loos-
ened, and/or broken components that were subjected to an impact.
M. WHEN YOU NEED HELP
WARNING
For The Rider:
Make sure that each person who helps you reads and fol-
lows all warnings and instructions that apply.
For Attendants:
1.
2.
Work with the rider’s doctor, nurse or therapist to learn safe meth-
ods best suited to your abilities and those of the rider.
Tell the rider what you plan to do, and explain what you expect the
rider to do. This will put the rider at ease and reduce the risk of an
accident.
3.
4.
Make sure the chair has push handles. They provide secure points for
you to hold the rear of the chair to prevent a fall or tip-over. Check
to make sure push handle grips will not rotate or slip off.
To prevent injury to your back, use good posture and proper body
mechanics. When you lift or support the rider or tilt the chair, bend
your knees slightly and keep your back as upright and straight as you
can.
5. Remind the rider to lean back when you tilt the chair backward.
6. When you descend a curb or single step, slowly lower the chair in
one easy movement. Do not let the chair drop the last few inches to
the ground. This may damage the chair or injure the rider.
7. To avoid tipping, or getting hung up on objects, unlock and rotate
anti-tip tubes up, and out of the way.
8. Whenever you aren’t attending the wheelchiar, ALWAYS use the
wheel-lock to secure the rear wheels, and lock anti-tip tubes in
place if you must leave the rider alone, even for a moment. This will
reduce the risk of a tip over or loss of control of the chair.
If you fail to heed these warnings, damage to your chair, a fall, tip-over or
loss of control may occur and cause severe injury to the rider or others.
I. ENVIRONMENTAL CONDITIONS
WARNING
1. Use extra care if you must ride your chair on a
wet or slick surface. If you are in doubt, ask for
help.
2. Contact with water or excess moisture may cause your chair to
rust or corrode. Avoid all extreme weather situations if possible.
a. Do not use your chair in a shower, pool or other body of water.
The chair tubing and parts are not water-tight and may rust or
corrode from the inside.
b. Avoid excess moisture (for example, do not leave your chair in a
damp bathroom while taking a shower).
c. Dry your chair as soon as you can if it gets wet, or if you use
water to clean it.
J. TERRAIN
WARNING
1. Based on ANSI/RESNA testing, Sunrise Medical recommends the use
of a caster wheel with a minimum diameter of 5”, if the wheelchair
will be overcoming obstacles up to 1/2” on a regular basis.
2. Your chair is designed for use on firm, even surfaces such as con-
crete, asphalt, indoor flooring, and carpets.
3. Do not operate your chair in sand, loose soil, or over rocky terrain.
4. If you use your chair on terrain that is rougher than described above
there is a danger that screws and bolts will loosen prematurely, and
that damage to wheels or axles could put the rider at risk of a fall,
tip-over, or loss of control.
If you fail to heed these warnings, damage to your chair, a fall, tip-over or loss
of control may occur and cause severe injury to the rider or others.
WARNING
1. This product is not intended for street use.
K. STREET USE
2. Avoid streets whenever possible.
3. Obey and follow all legal pedestrian pathways, and laws that apply to
pedestrians.
4. Be alert to the danger of motor vehicles in parking lots, or if you
must cross a road.
If you fail to heed these warnings, damage to your chair, a fall, tip-over or loss
of control may occur and cause severe injury to the rider or others
L. MOTOR VEHICLE SAFETY
If possible and feasible, the rider should transfer to the Original Equipment
Manufacturer vehicle seat and use the OEM vehicle restraint.
Sunrise Medical does provide a WC-19 Wheelchair Tie-Down and
Occupant Restraint System, otherwise called a Transit Option. To Identify
whether your wheelchair has been manufactured with the Transit Option
installed, look for four points of securement. Two Front points (A), and
two rear points (B). These points are recognized by the securement point
decal which can be found on or near the securement points. If your wheel-
chair is equipped with the Transit Option please review the Transit
Securement supplement that was provided with the wheelchair for addi-
tional information and instructions. You can request a copy from your
authorized supplier, or Sunrise medical at 1-800-333-4000 if you don’t have
it.
1 2
V. GENERAL WARNINGS
SR45
6
118611 Rev. D
Front Transit hook
1
Rear Transit hook
2
A
B
Look for this symbol on your wheelchair.
It indicates wheelchair securement points which conform to
ANSI/RESNA (1998) V.1- Section 19.
7
VI. SAFETY WARNINGS: FALLS & TIP-OVERS
6. If your chair has anti-tip tubes, do not go over an obstacle without
help.
7. Keep both of your hands on the handrims as you go over an obsta-
cle.
8. Never push or pull on an object (such as furniture or a doorjamb)
to propel your chair.
If you fail to heed these warnings, damage to your chair, a fall, tip-over or
loss of control may occur and cause severe injury to the rider or others.
D. FRONT CASTER LIFT
WARNING
Front caster lift can occur when the front wheels, ordinarily in contact with
the ground, are either intentionally, or unintentionally caused to lift from
the ground while the rear wheels remain in contact. Pitch control (partial
or full) should
NEVER
be attempted without consulting your healthcare
advisor and making sure that anti-tips are installed.
If you fail to heed this warning, you are at a high risk of damage to your
chair, a fall, tip-over or loss of control that may occur and cause severe
injury to the rider or others.
E. REACHING OR LEANING
WARNING
If you reach or lean it will affect the center of balance of your chair. This may
cause you to fall or tip over. When in doubt, ask for help or use a device to
extend your reach.
1.
NEVER
reach or lean if you must shift your weight sideways or rise up
off the seat.
2.
NEVER
reach or lean if you must move forward in your seat to do
so. Always keep your buttocks in contact with the backrest.
3.
NEVER
reach with both hands (you may not be able to catch your-
self to prevent a fall if the chair tips).
4.
NEVER
reach or lean to the rear unless your chair has anti-tip tubes
locked in place.
5.
DO NOT
reach or lean over the top of the seat back. This may
damage one or both backrest tubes and cause you to fall.
6. If You Must Reach Or Lean:
a. Do not lock the rear wheels. This creates a tip point and makes
a fall or tip-over more likely.
b.
c.
Do not put pressure on the footrests.
Move your chair as close as you can to the object you wish to
reach, then back up alongside it. Backing up will rotate the cast-
ers forward.
d. Do not try to pick up an object from the floor by reaching
down between your knees. You are less likely to tip if you reach
to the side of your chair.
e. Rotate the front casters until they are as far forward as possi-
ble. This makes the chair more stable.
f. Firmly grasp a rear wheel or an armrest with one hand. This will
help to prevent a fall if the chair tips.
If you fail to heed these warnings, damage to your chair, a fall, tip-over or
loss of control may occur and cause severe injury to the rider or others.
F. MOVING BACKWARD
WARNING
Use extra care when you move your chair backward. Your chair is most
stable when you propel yourself forward. You may lose control or tip over
if one of the rear wheels hits an object and stops rolling.
1. Propel your chair slowly and smoothly.
2. If your chair has anti-tip tubes, make sure to lock them in place.
3. Stop often and check to be sure your path is clear.
If you fail to heed these warnings, damage to your chair, a fall, tip-over or
loss of control may occur and cause severe injury to the rider or others.
A. CENTER OF BALANCE
WARNING
The point where this chair will tip forward, back, or to the side depends on
its center of gravity and stability. How your chair is set up, the options you
select and the changes you make may affect the risk of a fall or tip-over.
1.
The Most Important Adjustment is:
a. The position of the rear wheels. The more you move the rear
wheels forward, the more likely your chair will tip over back-
ward.
b. The position of the carriage.
2.
The Center of Balance is also Affected by:
a. A change in the set-up of your chair, including:
The seat height and seat angle.
• Backrest angle.
b. A change in your body position, posture or weight distribution.
c. Riding your chair on a ramp or slope.
d. The use of a back pack or other options, and the location and
amount of added weight can change the balance of your chair,
3.
To Reduce The Risk Of An Accident:
a. Consult your doctor, nurse or therapist to find out what axle
and caster position is best for you.
b. Consult your authorized dealer, BEFORE you modify or adjust
this chair. Be aware that you may need to make other changes
to correct the center of balance.
c. Have someone help you until you know the balance points of
your chair and how to avoid a tip-over.
d. Use anti-tip tubes.
If you fail to heed these warnings, damage to your chair, a fall, tip-over or
loss of control may occur and cause severe injury to the rider or others.
B. DRESSING OR CHANGING CLOTHES
WARNING
Your weight may shift if you dress or change clothes while seated in this
chair.
To reduce the risk of a fall or tip-over:
1. Rotate the front casters until they are as far forward as possible.
This makes the chair more stable.
2. Lock anti-tip tubes in place. (If your chair does not have anti-tip
tubes, back it up against a wall and lock both rear wheels).
If you fail to heed these warnings, damage to your chair, a fall, tip-over or
loss of control may occur and cause severe injury to the rider or others.
C. OBSTACLES
WARNING
Riding over curbs or obstacles can cause tipping and serious bodily harm. If
you have any doubt that you can safely cross any curb or obstacle, ALWAYS
ASK FOR HELP. Be aware of your riding skills and personal limitations.
Develop new skills only with the help of a companion.
To avoid the risk of traversing obstacles:
1.
2.
Keep a lookout for danger – scan the area well ahead of your chair
as you ride.
Make sure the floor areas where you live and work are level and free
of obstacles.
3. Remove or cover threshold strips between rooms.
4. Install a ramp at entry or exit doors. Make sure there is not a drop
off at the bottom of the ramp.
5. To Help Correct Your Center Of Balance:
a.
b.
Lean your upper body FORWARD slightly as you go UP over
an obstacle.
Press your upper body BACKWARD as you go DOWN from
a higher to a lower level.
SR45
7
1
18611 Rev. D
SR45
VI. SAFETY WARNINGS: FALLS & TIP-OVERS
G. ESCALATORS
WARNING
NEVER
use this chair on an escalator, even with an attendant. If you do, a fall or tip-over is likely.
If you fail to heed these warnings, damage to your chair, a fall, tip-over or loss of control may occur and
cause severe injury to the rider or others.
H. RAMPS, SLOPES & SIDEHILLS
WARNING
Whenever possible, avoid riding on a slope, which includes a ramp or sidehill. This will change the cen-
ter of balance of your chair. Your chair is less stable and more difficult to manuever when it is at an
angle. When moving up a hill, anti-tip tubes may not prevent a fall or tip-over. Always ask for help when
riding on slopes.
1.
Do not
use your chair on a slope steeper than 10°.
2. Avoid Sidehills.
Do not
use your chair on a sidehill with a slope steeper than 6°.
3.
Always
go straight up or straight down a slope.
Do not
“cut the corner” on a slope or ramp.
4.
Do not
turn or change direction on a slope.
5.
Do not
stop on a steep slope. If you stop, you may lose control of your chair.
6.
NEVER
use rear wheel locks to try to slow or stop your chair. This is likely to cause your chair
to veer out of control.
7.
ALWAYS
be aware of:
a. Wet or slippery surfaces.
b. A change in grade on a slope (or a lip, bump or depression). These may cause a fall or tip-
over.
c. A drop-off at the bottom of a slope or ramp. A drop-off as small as 3/4 inch can stop a
front caster and cause the chair to tip forward.
8. To Reduce The Risk Of A Fall Or Tip-Over:
a. Lean or press your body UPHILL. This will help adjust for the change in the center of balance
caused by the slope or sidehill.
b. Keep pressure on the handrims to control your speed on a down slope. If you go too fast
you may lose control.
c. Ask for help any time you are in doubt.
9. Ramps at home & work– For your safety, ramps at home and work must meet all legal require-
ments for your area:
a. Avoid a drop off. You may need a section at the top or bottom to smooth out the transition.
b. Stay in the center of the ramp and control your speed.
10. When you have to use a ramp, always stay in the CENTER of the ramp. Make sure the ramp is
wide enough so that you have no risk of going off the edge.
If you fail to heed these warnings, damage to your chair, a fall, tip-over or loss of control may occur and
cause severe injury to the rider or others.
I. TRANSFER
WARNING
It is dangerous to transfer on your own. It requires good balance and agility. Be aware that there is a
point during every transfer when the wheelchair seat is not below you. To Avoid A Fall:
1. Work with your health care advisor to learn safe transfer methods
a. Learn how to position your body and how to support yourself during a transfer.
b. Have someone help you until you know how to do a safe transfer on your own.
2. Lock the rear wheels before you transfer.
3. Be aware that the chair can still slide and/or tip. The wheel lock keeps the rear wheels from
rolling while you are perforrming the transfer.
4.
5.
Make sure that the pneumatic tires are properly inflated. Low tire pressure may allow the rear
wheel locks to slip. (see table in Section G “Pneumatic Tires”
Move your chair as close as you can to the seat you are transferring to.
If possible, use a transfer board.
6. Rotate the front casters until they are as far forward as possible.
7. If you can, remove the footrests, or swing them out of the way.
a. Make sure your feet do not catch in the space between the footrests.
b. Avoid putting weight on the footrests as this may cause the chair to tip.
8. Make sure armrests are removed, or out of the way and do not interfere with the transfer.
9. Transfer as far back onto the seat surface as you can. This will reduce the risk that the chair will
tip or move away from you.
If you fail to heed these warnings, damage to your chair, a fall, tip-over or loss of control may occur and
cause severe injury to the rider or others.
3 4 5 6
7 8
Downslope less than 10°
Straight down
Control Speed
Go Slow
No Turns
Upslope less than 10°
Lean Forward
Straight up
Don’t stop
No Turns
Sidehill less than
Don’t stop
No Turns
Ramps
Straight Down
Stay centered
No Drop-offs
Go Slow
GET READY
TRANSFER
ADJUST
1.
2. 3.
Before transferring, remove the arm-
rests, and footrests, and make sure the
wheel lock is set.
Optimum Transfer position
3
8
7
6
5
4
8
118611 Rev. D
SR45
J. CURBS & SINGLE STEPS
WARNING
Before riding over curbs, or negotiating even a single step, ALWAYS ask for assistance first. Curbs and steps
can cause tipping and serious bodily harm. When in doubt as to our ability to avoid, or traverse any obstacle,
ALWAYS ask for help. Be aware of your riding skills and personal limitations, develop new skills only with the
help of a companion.
For Attendant:
Each person who assists the rider with curbs and steps should read and follow all instruc-
tions and warnings pertaining to attendants, and caregivers.
1. Do not try to climb a high curb or step (more than 4 inches high) UNLESS you have help. Doing so may
cause your chair to exceed its balance point and tip over.
2. With the help of an attendant, go straight up and straight down a curb or step. If you climb or descend
at an angle, a fall or tip-over is likely.
3. Be aware that the impact of dropping down from a curb or step can damage your chair or loosen fas-
teners.
If you fail to heed these warnings damage to your chair, a fall, tip-over or loss of control may occur and can
possibly cause severe injury to the rider or others.
K. CLIMBING A CURB OR SINGLE STEP
WARNING
For Attendant:
follow these steps to help the rider climb a curb or single step going BACKWARD:
1. Stay behind the chair.
2. Continue backward until the rear wheels contact the face of the curb or step. Lift and roll the rear
wheels to the top of the curb.
3. Pull the chair backwards until the caster wheels have cleared the edge of the curb and return the chair
to it’s rolling position.
If you fail to heed these warnings damage to your chair, a fall, tip-over or loss of control may occur and cause
severe injury to the rider or others.
L. DESCENDING A CURB OR SINGLE STEP
WARNING
For Attendant::
Follow these steps to help a rider descend a curb or single step going FORWARD:
1. Stay at the rear of the chair.
2. Several feet before your reach the edge of the curb or step, tip the chair slightly and pull it backward.
3. When the chair is at it’s balance point, carefully step forwards until the rear wheels reach the edge of
the curb or step. Then allow the rear wheels to slowly roll down onto the lower level.
4. Push the chair forward until you are standing on the lower level.
5. When the rear wheels are safely on the lower level, tilt the chair back to its balance point.
If you fail to heed these warnings damage to your chair, a fall, tip-over or loss of control may occur and cause
severe injury to the rider or others.
9
9
9
VI. SAFETY WARNINGS: FALLS & TIP-OVERS
9
118611 Rev. D
9
M. STAIRS
WARNING
1. NEVER use this chair on stairs UNLESS you have someone to help you. Doing so is likely to cause a
fall or tip-over.
2. Negotiating stairs with a wheelchair always requires at least 2 attendants for safety.
If you fail to heed these warnings, damage to your chair, a fall, tip-over or loss of control may occur and cause
severe injury to the rider or others.
WARNING
Before you assist a rider, be sure to read the warnings “For Attendants” in Section V, Part K and follow all
instructions that apply. Be aware that you will need to learn safe methods best suited to your abilities.
N. CLIMBING STAIRS
WARNING
1. Use at least two attendants to move a chair and rider up stairs.
2. Move the chair and rider BACKWARD up the stairs.
3. The person at the rear is in control. He or she tilts the chair back to its balance point.
4. A second attendant at the front firmly grasps a non-detachable part of the front frame and lifts the chair
up and over one stair at a time.
5. The attendants move to the next stair up. Repeat for each stair, until you reach the landing.
If you fail to heed these warnings, damage to your chair, a fall, tip-over or loss of control may occur and cause
severe injury to the rider or others.
O. DESCENDING STAIRS
WARNING
1. Use at least two attendants to move a chair and rider down stairs.
2. Move the chair and rider FORWARD down the stairs.
3. The person at the rear is in control. He or she tilts the chair to the balance point of the rear wheels
and rolls it to the edge of the top step.
4. A second attendant stands on the third step from the top and grasps the chair frame. He or she low-
ers the chair one step at a time by letting the rear wheels roll over the stair edge.
5. The attendants move to the next stair down. Repeat for each stair, until you reach the landing.
If you fail to heed these warnings, damage to your chair, a fall, tip-over or loss of control may occur and cause
severe injury to the rider or others.
P. TILT USE
WARNING
BEFORE you operate the tilt mechanism:
1. Always verify that the arms of the rider are stable on the armrests or within the armrests.
2. Always verify that the legs of the rider are stable on the footrest/legrest.
3. Never place hands, feet or foreign objects into the tilt mechanism.
4. Never push or propel the chair with the seat tilted in a forward position.
5. Never add chair accessories that are not specifically designed for the SR45.
6. Never exceed a tilted position that aligns the backrest parallel to the ground.
If you fail to heed these warnings, damage to your chair, a fall, tip-over or loss of control may occur and cause
severe injury to the rider or others.
10
VI. SAFETY WARNINGS: FALLS & TIP-OVERS
SR45
10
118611 Rev. D
10
VII. WARNINGS, COMPONENTS & OPTIONS
F. FASTENERS
WARNING
Many of the screws, bolts and nuts on this chair are special high-strength
fasteners. Use of improper fasteners may cause your chair to fail.
1. ONLY use fasteners provided by an authorized supplier (or ones of
the same type and strength, as indicated by the markings on the
heads).
2. Over- or under-tightened fasteners may fail or cause damage to
chair parts.
3. If bolts or screws become loose, tighten them as soon as you can.
If you fail to heed these warnings damage to your chair, a fall, tip-over or
loss of control may occur and cause severe injury to the rider or others.
G. FOOTRESTS
WARNING
1. At the lowest point, footrests should be AT LEAST 2 inches off the
ground. If set too LOW, they may “hang up” on obstacles you can
expect to find in normal use. This may cause the chair to stop sud-
denly and tip forward.
2. To Avoid A Trip Or Fall When You Transfer:
a.
b.
Make sure your feet do not “hang up” or get caught in the space
between the footrests.
Avoid putting weight on the footrests, as the chair may tip for-
ward.
c. Footrests should be swung out of the way or removed whenever
entering or exiting the wheelchair.
3. NEVER lift this chair by the footrests. Footrests detach and will not
bear the weight of this chair. Lift this chair only by non-detachable
parts of the main frame.
If you fail to heed these warnings damage to your chair, a fall, tip-over or
loss of control may occur and cause severe injury to the rider or others.
H. PNEUMATIC TIRES
WARNING
Proper inflation extends the life of your tires and makes your chair easier to
use.
1. Do not use this chair if any of the tires is under- or over-inflated. Check
weekly for proper inflation level, as listed on the tire sidewall.
2. Low pressure in a rear tire may cause the wheel lock on that side to slip
and allow the wheel to turn when you do not expect it.
3. Low pressure in any of the tires may cause the chair to veer to one side
and result in a loss of control.
4. Over-inflated tires may burst.
If you fail to heed these warnings, damage to your chair, a fall, tip-over or loss of
control may occur and cause severe injury to the rider or others.
A. ANTI-TIP TUBES (OPTIONAL)
WARNING
Anti-tip tubes can help keep your chair from tipping over backward in
normal conditions.
1. Sunrise recommends the use of anti-tip tubes:
2. When locked in place (in the “down” position) anti-tip tubes should
be BETWEEN 1 1/2 to 2 inches off the ground.
a. If set
higher
than 2 inches, they may not prevent a tip-over.
b. If set
lower
than 1 1/2 inches, they may “hang up” on obstacles
and cause a fall or tip over.
3. If you have to climb or descend a curb, or overcome an obstacle, it
may be necessary to have an attendant make sure the anti-tip tubes
are rotated up, and out of the way, so that the chair and rider do
not get stuck and/or become unstable.
If you fail to heed these warnings damage to your chair, a fall, tip-over or
loss of control may occur and cause severe injury to the rider or others.
B. ARMRESTS
WARNING
Armrests detach and will not bear the weight of this chair.
1. NEVER lift this chair by its armrests. They may come loose or break.
2. Lift this chair only by non-detachable parts of the main frame.
If you fail to heed these warnings damage to your chair, a fall, tip-over or
loss of control may occur and cause severe injury to the rider or others.
C. PUSH HANDLES
WARNING
When you have a attendant, make sure that this chair has push handles.
1. Push handles provide secure points for an attendant to hold the rear
of this chair, to prevent a fall or tip-over. Make sure to use push han-
dles when you have an attendant.
2. Check to make sure push handle grips will not rotate or slip off.
If you fail to heed these warnings, damage to your chair, a fall, tip-over or loss
of control may occur and cause severe injury to the rider or others.
D. STROLLER HANDLE
WARNING
1.
2.
Always keep hands away from the locking mechanism located at the
bottom of the back canes when folding the back down or pulling it
back up.
Always keep fingers away from the interior of the hinge when read-
justing the adjustable stroller handle.
E. CUSHIONS
WARNING
1. Quickie standard foam cushions are not designed for the relief of
pressure.
2. If you suffer from pressure sores or if you are at risk that they will
occur, you may need a special seat system or a device to control your
posture. Consult your doctor, nurse or therapist to find out if you
need such a device for your well-being.
3. Seat pans are not intended to be used as a direct seating surface. A
cushion or other seating surface should be placed on the seat pan
before use.
If you fail to heed these warnings, damage to your chair, a fall, tip-over or
loss of control may occur and cause severe injury to the rider or others.
SR45
11
118611 Rev. D
Recommended Tire
Pressures
I. POSITIONING BELTS (OPTIONAL)
WARNING
Use positioning belts ONLY to help support the rider’s posture. Improper
use of these belts may cause severe injury to or death to the rider.
1. Make sure the rider does not slide down in the wheelchair seat. If
this occurs, the rider may suffer chest compression or suffocate due
to pressure from the belts.
2. The belts must be snug, but must not be so tight that they interfere
with breathing. You should be able to slide your open hand, flat,
between the belt and the rider.
3.
4.
A pelvic wedge or a similar device can help keep the rider from slid-
ing down in the seat. Consult with the rider’s doctor, nurse or ther-
apist to find out if the rider needs such a device.
Use positioning belts only with a rider who can cooperate. Make
sure the rider can easily remove the belts in an emergency.
5. NEVER Use Positioning Belts:
a. As a patient restraint. A restraint requires a doctor’s order.
b. On a rider who is comatose or agitated.
c. As a motor vehicle restraint. In an accident or sudden stop the
rider may be thrown from the chair. Wheelchair seat belts will
not prevent this, and further injury may result from the belts or
straps.
If you fail to heed these warnings damage to your chair, a fall, tip-over or
loss of control may occur and cause severe injury to the rider or others.
J. QUICK-RELEASE AXLES
WARNING
1. Do not use this chair UNLESS you are sure that both quick-release
rear axles are locked.
2. An axle is not locked until the quick-release button pops out fully. If
the axle is not inserted fully, the wheel may come off during use,
endangering the rider.
3. Quick-release axles should be periodically cleaned and inspected for
function, and signs of wear or bending. Replace as necessary.
If you fail to heed these warnings, damage to your chair, a fall, tip-over or loss
of control may occur and cause severe injury to the rider or others.
K REAR AXLES
WARNING
A change in set-up of the rear wheels will affect the center of balance
of your chair.
1. The farther you move the rear axles FORWARD, the more likely it
is that your chair will tip over backward.
2. Consult your doctor, nurse or therapist to find the best rear axle
set-up for your chair. Do not change the set-up UNLESS you are
sure you are not at risk to tip over.
3. Adjust the rear wheel locks after you make any change to the rear
axles.
a. If you fail to do so, the locks may not work.
b. Make sure lock arms embed in tires at least 1/8 inch when
locked.
If you fail to heed these warnings, damage to your chair, a fall, tip-over or loss
of control may occur and cause severe injury to the rider or others.
L. REAR WHEEL LOCKS
WARNING
Rear wheel locks are NOT designed to slow or stop a moving wheelchair.
Use them only to keep the rear wheels from rolling when your chair is at a
complete stop.
1. NEVER use rear wheel locks to try to slow or stop your chair when
it is moving. Doing so may cause a fall or tip-over
2. To keep the rear wheels from rolling, always set both rear wheel
locks when you transfer to or from your chair.
3. Low pressure in a rear tire may cause the wheel lock on that side to
slip and may allow the wheel to turn when you do not expect it.
4. Make sure lock arms embed in tires at least 1/8 inch when locked. If
you fail to do so, the locks may not work.
If you fail to heed these warnings damage to your chair, a fall, tip-over or
loss of control may occur and cause severe injury to the rider or others.
M. MODIFIED SEAT SYSTEMS
WARNING
Use of a seat system not approved by Sunrise may alter the center of bal-
ance of this chair. This may cause the chair to tip over.
1. Do not change the seat system of your chair UNLESS you consult
your authorized supplier first.
2. Use of a seating system not provided by Sunrise is prohibited for
transit use.
If you fail to heed these warnings damage to your chair, a fall, tip-over or
loss of control may occur and cause severe injury to the rider or others.
VII. WARNINGS: COMPONENTS & OPTIONS
SR45
12
118611 Rev. D
SR45
13
118611 Rev. D
VIII. USE AND MAINTENANCE
WARNING
The owner and/or Caregiver for the use of this product, is responsible for
making sure that it has been setup and adjusted by a trained service pro-
fessional under the advice of a healthcare advisor. The chair may require
periodic maintenance or certain in-use adjustments that may be performed
by the owner or caregiver.
A. INTRODUCTION
1. Proper maintenance will improve performance and extend the useful
life of your chair.
2. Clean your chair regularly. This will help you find loose or worn
parts and make your chair easier to use. You will need a mild deter-
gent solution and plenty of cleaning rags.
3. If discovered, repair or replace loose, worn, bent or damaged parts
before using the chair
.
4. To protect your investment, have all major maintenance and repair
work done by your authorized dealer.
5
. Inspect and maintain this chair strictly per the maintenance chart.
6
. If you detect a problem, make sure to order parts, or have service,
and repair work done at your authorized dealer before use.
7
. At least once per year, have a complete inspection, safety check,
and service of your chair made by an authorized dealer.
B. CRITICAL MAINTENANCE TIPS
D. CLEANING
1. Paint Finish
a. Clean the painted surfaces with mild soap or detergent at least once
a month.
b. Protect the paint with a coat of non-abrasive auto wax every three
months.
2. Axles and Moving Parts
a. Clean around axles and moving parts WEEKLY with a slightly damp
(not wet) cloth.
b. Wipe off or blow away any fluff, dust or dirt on axles or moving
parts.
3. Upholstery
a. Hand-wash (machine washing may damage fabric).
b. Drip-dry only. DO NOT machine dry as heat will damage fabric.
4. Basic Maintenance Materials available at local store
a. Tire Pump
b. Clean rags or cotten cloth.
c. Teflon-based Lubricant
d. Mild Detergent.
1. Tire Air Pressure:
Check air pressure in pneumatic tires at least
ONCE PER WEEK
. The
wheel locks will not grip properly if you fail to maintain the air pressure
shown on tire sidewall.
2. Axles & Axle Sleeves:
When checking axles and axle sleeves every six months, make sure they
are clean and tight.
Loose sleeves will damage the axle plate and will affect performance.
C. MAINTENANCE CHART
NOTE– You do not need to grease or oil the chair.
E. TROUBLESHOOTING CHART
Weekly
3 Months
6 Months
Annually
R Tire inflation level
R Wheel locks
R All fasteners for wear and tightness
R Armrests
R Axle and axle sleeves
R Quick-release axles
R Wheels, tires and spokes
R Casters
R Anti-tip tubes
R Frame
R Rollers
R Tilt cables and plunger
R Rocker arm
R
Service by authorized supplier
CHECK...
SOLUTIONS
SYMPTOMS
Left turn in chair
Right turn in chair
Looseness in chair
Sluggish turning
Squeaks and rattles
Caster flutter
Chair drops fast into tilt
and is hard to return.
Chair is hard to tilt and
returns too fast.
RR R R
Make sure tire pressure is cor-
rect and equal in both rear tires
and front caster tires, if pneu-
matic.
RRRR
Make sure all nuts and bolts are
snug.
RR
Make sure all spokes and nipples
are tight on radial spoke wheels.
R
Use Tri-Flow Lubricant
(Teflon™-based) between all
modular frame connections and
parts.
RR R R
Check for proper caster plate
adjustment.
See instructions for caster plate
adjustment.
RR R
Make sure both front casters
touch the ground simultaneous-
ly. If they do not, add the proper
spacers between the bottom
bearing of the caster plate and
fork stem nut until they do.
Make sure you check for this
problem on a flat surface.
R
Consult with an authorized sup-
plier to adjust CG/CR forward
R
Consult with an authorized sup-
plier to adjust
118611 Rev. D
14
SR45
F. TO MOUNT AND REMOVE REAR WHEELS
Do not use this chair UNLESS you are sure both quick-release axles are locked. An unlocked axle may come off
during use and cause a fall.
NOTE–
Axle is not locked until the quick-release button (A) pops out fully.
2. To Install Wheel
a. Depress quick-release button (A) fully. This will release tension on ball bearings at other end.
b. Insert axle through hub of rear wheel (B).
c. Keep pressure on button (A) as you slide axle (C) into axle sleeve (D).
d. Release button to lock axle in sleeve. Adjust axle if it does not lock.
e. Repeat steps on other side.
3. To Remove Wheel
a. Depress quick-release button (A) fully.
b. Remove wheel by sliding axle (C) out of axle sleeve (D).
c. Repeat steps on other side.
G. CUSHION INSTALLATION
a. Place cushion on seat pan with hook material side down. The beveled edge of the cushion should be in
front, press it firmly into place.
H. WHEEL LOCKS
WARNING
Wheel locks are installed at Sunrise and should be adjusted by your qualified service person. Inspect wheel locks
weekly per the maintenance chart. Do not use your chair UNLESS you are sure both wheel-locks can fully engage. A
wheel-lock that is not correctly adjusted may allow your chair to roll, or turn unexpectedly. Wheel-locks must be
adjusted after making sure the tires have the correct air pressure. When fully engaged, the arm should be imbedded
into the tire at least 1/8 to be effective. If you find the wheel locks have slipped or are not working correctly contact
your service provider for proper adjustment.
I. ANTI-TIP TUBES- REAR
Anti-tip tubes are recommended for all wheelchairs. Do not attempt to overcome Obstacles on your own.
1. Inserting Anti-Tip Tubes Into Receivers
a. Press in the rear anti-tip button(E) on the anti-tip so that both buttons are drawn inside.
b. Insert the anti-tip tube into the receiver (F).
c. Turn the anti-tip tube down until front release button pops through the receiver mounting hole.
d. Insert second anti-tip tube the same way.
2. Turning Anti-Tip Tubes Up
Turn the anti-tip tubes up when being pushed by attendant, and overcoming obstacles or climbing curbs.
a. Press in the rear anti-tip tube release button (E).
b. Hold button (E) in and turn anti-tip tube up (G).
c. Release the button.
d. Repeat with second anti-tip tube.
e. Remind attendant to return anti-tips to the down position after completing the maneuver.
3. Adjusting Anti-Tip Tube Wheel
The anti-tip tube wheels may have to be raised or lowered to achieve proper ground clearance (1-1/2" to 2").
a. Press the anti-tip wheel release button (H) so that the release pin is drawn inside.
b. Raise or lower to one of the three or six pre-drilled holes.
c. Release the button (H).
d. Adjust the second anti-tip tube wheel the same way. Both wheels should be at exactly the same height.
11
1413
12
VIII. USE AND MAINTENANCE
13
A
B
C
D
1
1
12
14
E
F
G
H
118611 Rev. D
15
SR45
J. DUAL-POST ARMRESTS
1. Installation or Removal
a. The assembly is held securely in place when the securing lever (A) is facing outside.
b. Pull front securing lever (A) forward to release.
c. Insert or remove armrest.
d. Return securing lever to locked position.
2. Height-Adjustment (optional)
a. Release the upper securing lever (C).
b. Set armrest at desired height.
c. Return securing lever to locked position.
d. Move armrest up or down to allow armrest to snap into place.
3. Flip Back (optional)
a. Release the front securing lever only (A).
b. Flip the armrest back, it remains attached to the rear receiver.
c. To detach armrest completely pull rear securing lever (B) up.
d. Move armrest down into place.
e. Return securing lever to locked position.
K. HEIGHT-ADJUSTABLE ARMRESTS (optional)
1. Installation
a. Slide the outer armpost (1) into the receiver(7) mounted to the wheelchair frame.
b. The armrest will automatically lock into place.
2. Height Adjustment
a. Rotate release lever (2) to second stop.
b. Slide armrest pad (4) up or down to desired height.
c. Return lever (2) to locked position against armpost.
d. Push arm pad down until upper armpost locks firmly into place.
3. Removing Armrest
a. Grip release lever (3) and pull up to remove the armrest.
1615
17
VIII. USE AND MAINTENANCE
Flip-Back Height adjustable armrest
with transfer bar
Height adjustable single post
15
16
17
A
B
C
1
2
3
4
5
6
7
8
1. Outer armpost
2. Release Lever Height
3. Release lever
4. Armrest pad
5. Transfer bar
6. Side panel
7. Receiver
8. Clamp
Flip-Back Height adjustable armrest
without transfer bar
A
B
C
118611 Rev. D
16
SR45
L. SWING-AWAY HANGERS/FOOTRESTS
Swing-in-Swing-out Hangers and Footrests (70º, 80°)
1. Installation
a. Place swing-in/swing-out pivot saddle into the receiver (A) on front frame tube with the footrest
facing inward or outward from the frame.
b. Rotate the footrest inward until it locks into place on locking plate.
2. Removal
a. To remove footrest, release latch (B) by pulling lever upward or pushing lever downward.
b. Rotate footrest inward or outward and lift.
M. ARTICULATING LEGREST (optional)
1. Installation or Removal
To install or remove Articulating Legrest (ALR) see instructions for Swing-away Footrest installation.
2. Elevation Adjustment
a. To raise legrest, lift to desired position. Legrest will automatically lock in place.
b. To lower legrest, while seated in chair, press release lever (C) down and lower Legrest to desired posi-
tion. Legrest will automatically lock in place.
N. ELEVATING LEGREST (optional)
1. Installation or Removal
To install or remove Elevating Legrest (ELR) see instructions for Swing-away Footrest
installation.
2. Elevation Adjustment
a. To raise legrest, lift to desired position. Legrest will automatically lock in place.
b. To lower legrest, while seated in chair, press release lever (D) down and lower legrest to desired position.
Legrest will automatically lock in place.
18
19
20
VIII. USE AND MAINTENANCE
18
20
D
A
B
Articulating
Legrest
1
9
C
Elevating
Legrest
118611 Rev. D
17
SR45
O. TILT-IN-SPACE MECHANISM
The tilt-in-space mechanism is installed by Sunrise. Two cable/trigger mechanisms positively lock the chair in
place from 0º to 45º depending on the set-up.
1. Trigger Tilt Operation
a. Depressing both triggers (A) at the same time disengages the locking mechanism and allows the seat and
back to rotate in space. Releasing the triggers positively locks the rockers in place.
b. The approximate degree of tilt the seat is at can be seen on the tilt indicator (C).
c. To lock out the tilting function, and prevent accidental tilt, be sure to insert the locking pins (B) into the
trigger holders when you are done adjusting the tilt.
2. Foot Release
a. Depressing foot pedal (D) disengages the locking mechanism and allows the seat and back to rotate in
space. Releasing the foot pedal positively locks the rockers in place.
b. The approximate degree of tilt the seat is at can be seen on the tilt indicator (C).
P. STROLLER HANDLE EXTENSION (option)
Installation
a. Press button (E) on the stroller handle so that release pins are drawn inside the tube.
b. Insert the tube into the back tube receiver (F) until the release pin protrudes through the receiver
mounting hole.
Q. RECLINING BACK
The dual trigger reclining mechanism is installed by Sunrise.
To Recline or Raise Backrest
a. Depress both triggers (G) at the same time. Releasing the triggers positively locks the backrest in place
within its 45° range.
b. To lock out the adjustment system, insert the locking pin (H) into the trigger holder.
NOTE– ALWAYS
lock the dual trigger reclining mechanism securely in place after positioning the backrest.
R. CHECK-OUT
Once the wheelchair is assembled and adjusted, it should roll smoothly and easily. All accessories should also
perform smoothly. If you have any problems, follow these procedures:
1. Review assembly and adjustment sections to make sure the chair was properly prepared.
2. Review the troubleshooting guide.
3. If your problem persists, contact your authorized supplier. If you still have a problem after contacting
your authorized supplier, contact Sunrise customer service. See the introduction page located in the
front of this User’s Manual for details on how to contact your authorized supplier, or Sunrise customer
service.
22
23 24
21
VIII. USE AND MAINTENANCE
21
22
23
24
A
B
C
D
E
F
G
H
118611 Rev. D
18
SR45
WARNING
The owner of this chair is responsible for makiing sure that it has been setup and adjusted by a trained service
professional under the advice of a healthcare advisor. Service or adjustments should only be done with the
advice of a healthcare professional. Always use parts and accessories that have been recommended and
approved by Sunrise Medical when servicing this chair.
A. DEALER SERVICE INTRODUCTION
1. At least once per year, this chair should have a complete inspection, safety check, and regular service
made by an authorized dealer.
2. If you have discovered a worn, bent, or damaged part, repair or replace them with recommended parts
before returning this chair to service.
.
3. All major maintenance and repair work should be done by the authorized dealer.
B. CRITICAL MAINTENANCE TIPS
1. Torque settings:
A torque setting is the optimum tightening which should be made on a particular fastener. It is important to use
proper torque settings where specified. When not specified, torque settings should be 60 in-lbs
2. Dealer Service and Adjustment Reference materials:
Go to www.sunrisemedical.com for parts manuals, instruction sheets, and instructional videos that will aid in the
repair of the Quickie/Zippie Family of wheelchairs.
C. CLEANING
1. Paint Finish
a. Clean the painted surfaces with mild soap or detergent.
b. Protect the paint with a coat of non-abrasive auto wax.
2. Axles and Moving Parts
a. Clean around axles and moving parts with a slightly damp (not wet) cloth.
b. Wipe off or blow away any fluff, dust or dirt on axles or moving parts.
c. DO NOT USE 3 in 1 oil, or WD-40 ® for lubrication. Only use Teflon based Lubricant when working on
this wheelchair.
D. REAR AXLE
1. Rear Wheel Axle Adjustment
Tight axle sleeves should be maintained for proper performance of the wheelchair.
a. To adjust the axle (A) you will need a 3/4" wrench (B) to turn the outside axle nuts (C).
b. You will also need a 1/2" wrench to hold the the opposite end of the axle (D), and prevent the axle from
turning, while you are adjusting the nut.
c. Turn the outside axle nut clockwise to tighten.
d. There should only be zero to ten thousandths of an inch (.010") of play.
2. Moving the Rear Axle for Weight Distribution
Weight distribution between the front and rear wheels is primarily adjusted by moving the rear axles forward or
rearward on the frame. Moving the axles REARWARD provides better forward and rearward tipping stability.
Moving the axles FORWARD shifts more of the rider’s weight onto the REAR wheels, providing the following
benefits: the front end of the wheelchair becomes lighter, thus reducing the turning effort, and with a shorter
wheelbase the turning radius is reduced.
CAUTION
- Moving the Rear axles can effect the stability of the device ALWAYS check stability with the rider
before putting the chair into service
IMPORTANT NOTE–
The axle adjustment on each side of the chair should be equal.
NOTE–
Use a torque setting of 120 in.-lbs. When setting-up the axle plate.
NOTE–
The frame must be kept horizontal when height adjustments are made. Refer to matrix in the ordering
guide for proper setting.
3. Axle Position Adjustment
a. Remove both wheels from the chair.
b. Remove the bolts (E) from the axle plate (F) on both sides of the chair.
c. Reposition the axle plate in desired position.
d. Insert and tighten bolts (E).
25
26
IX. DEALER SERVICE & ADJUSTMENT.
TOOLS YOU WILL NEED
1. Imperial Hex key set
2. Metric Hex key set
3. Imperial Open-end Wrench set
4. Metric Open-end Wrench set
5. Torque wrench
6. Imperial Hex bit Socket set
7. Metric Hex bit Socket set
8. Phillips and Flat screwdrivers
25
A
B
C
D
26
E
F
118611 Rev. D
19
SR45
a. Loosen and remove bolts (E).
b. Set axle at desired height using pre-set holes in the axle plate (B) on both sides.
4. Axle Height Adjustment
c. Replace and tighten bolts.
E. WHEEL LOCKS
Adjustment
a. Evenly loosen both screws (A). Do not attempt to remove one screw at a time.
b. Slide assembly toward rear wheel until clamp embeds into tire to prevent wheel movement, when in
locked position.
c. Tighten screws (A).
F. SINGLE -POST ARMREST RECEIVER
1. Adjusting Armrest Receiver Fit
To tighten or loosen the fit of the outer armpost in the receiver:
a. Loosen the bolts on the sides of the receiver (D).
b. With the armrest in the receiver, squeeze the receiver to achieve the desired fit.
c. Tighten the four bolts (D).
2. Moving the Receiver location
a. Loosen the 3 bolts (C) holding the clamp halves(B) together (do not remove them)
b. Slide the clamp so that armrest is at the correct position.
c. Tighten the 3 bolts (C).
G. SWING-AWAY HEIGHT ADJUSTMENT
Height Adjustment
NOTE–
It is recommended that you maintain a minimum of 2.0 inches between the lowest point on the
footrest and the floor.
a. Loosen set screw (E) using a 3/16 inch hex key.
b. Slide footrest extension (F) up or down inside frame tube to desired height.
c. Tighten set screw (E). Use a torque setting of 144 in-lbs (16.27 Nm).
27
28
26
29
IX. DEALER SERVICE & ADJUSTMENT
27
28
A
C
B
D
29
E
F
118611 Rev. D
20
SR45
H. FOOTPLATE ADAPTER BRACKET
The footplate adapter bracket(A) can be installed by the dealer. The main purpose of this part is to allow for
height adjustment while using front mount footplates on a quick release hanger. The plate can be reversed which
adds to it’s range of adjustment.
1. Footplate Height Adjustment
a. Remove the hardware (B, C) and remove the footplate(D) and adapter plate assembly.
b. Move the footplate(D) and assembly up or down to the desired position, using the “Front mount hanger
setup” table, and (figure 32) as reference.
c. Re-insert and tighten the hardware (B, C) to a torque of (96in-lbs)
d. Repeat the process for the other hanger and footplate.
NOTE–
In most cases you will want to make sure the footplates are adjusted so that the height is the same on
both sides
323130
IX. DEALER SERVICE & ADJUSTMENT
30
33
G
31
32
I. ELEVATING / ARTICULATING LEGREST
1. Height Adjustment of the Calf Pad
a. Loosen the retaining nut (G) located at the back of the calf pad bracket assembly.
b. Slide the calf pad bracket assembly up or down.
c. Tighten the retaining nut (G once the pad is in the desired position.
Height Adjustment with Extension Tube
a. (See “Swing-away Height Adjustment” Section G)
33
A
B
C
D
A
A
4” EXTENSION
2” EXTENSION
ADAPTER
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28

Quickie EIZ9 Manuale del proprietario

Categoria
Passeggini
Tipo
Manuale del proprietario
Questo manuale è adatto anche per

in altre lingue