Invacare Aquatec Ocean E-VIP Manuale utente

Tipo
Manuale utente
Aquatec® Ocean E-VIP
en Shower and Toilet Commode
User Manual
de Dusch- und Toilettenrollstuhl
Gebrauchsanweisung
fr Fauteuil/chaise pour douche/toilettes
Mode d’emploi
it Carrozzina da doccia e WC
Istruzioni per l‘uso
es Silla de ducha y WC
Manual de instrucciones
nl Douche- en toiletrolstoel
Gebruiksaanwijzing
This manual must be given to the user of the product.
Before using the product, read this manual and safe it
for future reference!
©Aquatec Operations GmbH
Every effort has been made to ensure that the contents of this publication are fully up-to-date at the time of going to print.
As part of its ongoing improvement of products, Aquatec Operations GmbH reserves the right to modify existing models at any time.
Aquatec dealers will be notified of any such modifications. Any use of this publication, or of parts thereof, as well as any reproduction
of images, must have the written consent of Aquatec Operations GmbH.
Contents
english
1 General 4
1.1 General information 4
1.2 Symbols in this user manual 4
1.3 Warranty 4
1.4 Standards and regulations 4
1.5 Intended use 4
1.6 Product service life 5
2 Safety 5
2.1 Safety information 5
2.2 Safety information on electromagnetic compatibility 5
3 Description 5
3.1 Components 5
3.2 Identification label 6
4 Assembly and installation 6
4.1 Safety information 6
4.2 Assembling the seat frame 6
4.3 Fitting the headrest 7
4.4 Fitting the chest belt 8
4.5 Fitting the seat plate 9
4.6 Adjusting the backrest cover 9
4.7 Setting the armrest height 10
4.8 Fitting the footrests 11
4.9 Fitting the electronics cover 11
4.10 Removing the battery pack 12
4.11 Charging the battery 13
5 Operation 14
5.1 Safety information 14
5.2 Turning the armrests 14
5.3 Turning the footrests 15
5.4 Control 15
5.5 Engaging the directional locking device 16
6 Transport 16
6.1 Safety information 16
7 Maintenance 16
7.1 Maintenance and servicing 16
7.2 Cleaning and disinfection 17
7.3 Maintaining the performance of the battery pack 18
7.4 Changing the wheels 18
7.5 Changing the drives 18
8 After use 18
8.1 Storage 18
8.2 Re-use 18
8.3 Disposal 18
9 Troubleshooting 19
9.1 Identifying and repairing faults 19
10 Technical data 20
10.1 Dimensions and weight 21
10.2 Electronic data 21
10.3 Materials 21
Shower and Toilet Commode Ocean E-VIP General
4
1 General
1.1 General information
This user manual contains information and notes on the proper and
safe use of the shower and toilet commode.
Please read this user manual carefully before using the product.
Please observe all the notes, particularly the safety information,
and act accordingly.
The position specifications (A, B, C, etc.) in the handling instructions
always refer to the preceding figure.
1.2 Symbols in this user manual
In this user manual, warnings are marked with symbols. The title next
to the warning symbol indicates the level of danger.
WARNING
Indicates a dangerous situation which could lead to death or
serious injury if not avoided.
CAUTION
Indicates a dangerous situation which could lead to minor
injuries if not avoided.
IMPORTANT
Indicates a dangerous situation which could lead to damage if
not avoided.
i
Useful tips, recommendations and information to ensure effici-
ent and smooth operation.
Complies with Directive 93/42/EEC concerning medical
devices. The market launch date for this product is indicated
in the EU declaration of conformity.
Manufacturer
1.3 Warranty
We provide a manufacturer’s warranty for the product in accordance
with our General Terms and Conditions of Business in the respective
countries. Warranty claims can only be made through the provider
from whom the appliance was obtained.
1.4 Standards and regulations
Quality is of the utmost importance for our company; all processes are
based on the ISO 9001 and ISO 13485 standards.
This product features the CE mark, in compliance with the Medical
Device Directive 93/42/EEC Class 1.
The product meets the requirements of the standards,
DIN EN 12182 (Assistive products for persons with disability) and
DIN EN 60601-1 (Electrical safety) and
DIN EN 60601-1-2 (Electromagnetic compatibility).
Invacare® is continuously working towards ensuring that the
company’s impact on the environment, locally and globally, is reduced
to a minimum. We comply with the current environmental legislation
(e.g. WEEE and RoHS directives). We only use REACH compliant
materials and components.
Should you require further information, please contact the relevant
Invacare® subsidiary in your country (contact addresses are provided
on the back of this user manual).
1.5 Intended use
The shower and toilet commode is intended solely as an aid when
showering, using the toilet or transferring patients in an indoor envi-
ronment. The product should not be used for any other purpose.
WARNING Risk of injury
Never stand on the product to get into or out of the bath-
tub, do not use it for climbing or descending, as a support,
or for any similar purpose.
Not suitable for outdoor use.
You can use the product as a toilet commode by placing it over a stan-
dard toilet or by combining it with a commode pan (optional).
Operating temperature: 5 - 40 °C
Shower and Toilet Commode Ocean E-VIPSafety
5
1.6 Product service life
If the product is used as intended and in accordance with the safety
regulations, the expected product life is 5 years. The effective service
life can vary, however, depending on the frequency and intensity of use.
2 Safety
2.1 Safety information
WARNING Risk of injury
Do not use a faulty product.
In the event of a malfunction, contact a dealer immediately.
Do not make any unauthorized changes or alterations to
the product.
Only use accessories intended for this product.
2.2 Safety information on
electromagnetic compatibility
This product was successfully tested to international standards for its
electromagnetic compatibility. However, electromagnetic fields such as
those generated by radio and television transmitters, radio equipment
and mobile telephones, can influence the operation of products with
electrical drives. The electronics used in this product can also cause
weak electro-magnetic interference but this lies below the statutory
limits. You should therefore observe the following instructions:
CAUTION Electromagnetic interference
Electromagnetic interference could cause the Ocean E-VIP to
malfunction or interfere with other devices.
Switch off the external device and/or the Ocean E-VIP if you
notice such behavior.
If other electrically operated medical products cause
interference or are themselves disrupted, switch off
the Ocean E-VIP and contact your dealer.
You will find further information about the product‘s electromagnetic
properties in Section 10.4 Guidelines and manufacturer‘s declaration.
3 Description
3.1 Components
The following components are included within the scope of delivery:
D
(3x)
(2x)
(4x)
(2x)
B
A
Headrest
B
User manual
C
Chest belt
D
Seat plate
E
Bolt (4 x), safety clips (4 x), clips for footrests (2 x),
cable tie (1 x) packed in a bag
F
Footrests with heel strap (2 x)
G
Chassis with hand control and control box with battery pack
+ drives
H
Seat frame with backrest cover and armrests
I
Charger
J
Tilt drive
K
Electronics cover
Shower and Toilet Commode Ocean E-VIP Assembly and installation
6
3.2 Identification label
The identification label contains important information:
A
B
C
D
E
F
G
H
I
J
K
L
A
Conformity mark
B
Duty cycle (max. 10%, max. 2 min/18 min)
C
Note (disposal)
D
Type of protection
E
Serial device number
F
Note (observe accompanying documents)
G
Production timeframe
H
Load capacity
I
Nominal voltage/rated power
J
Type B applied part
K
Device designation
L
Note (only suitable for use on flat surfaces)
i
The identification label is applied to the rear left side tube.
4 Assembly and installation
4.1 Safety information
IMPORTANT
Check the parts for transport damage before
commissioning and contact the dealer if required.
Ensure during assembly that the parts are positioned
correctly with respect to one another.
This section explains how to assemble the product.
The product is dismantled in the reverse order.
4.2 Assembling the seat frame
WARNING
Risk of bolts slipping out.
Make sure that the safety clips engage and
are correctly fitted (see diagram below).
1. Secure all the wheels with the red foot levers. To do this, press
down on the red foot lever on the wheels.
2. Remove the drive for the seat tilt A from the chassis.
To do this, cut through the cable tie.
3. Push the fork B at the lower end of the drive A onto lip D at the
back edge of the chassis and align the holes.
4. Insert bolt E (35 mm) into the holes from the outside and push it
in fully.
Shower and Toilet Commode Ocean E-VIPAssembly and installation
7
5. Attach a safety clip C on the inside.
6. Insert cable B of drive D as far as possible into chassis A.
7. Use cable tie C provided to secure the cable of the drive in this
position.
IMPORTANT
The armrests face forward when folded down.
8. Insert both sides of seat frame F into receivers H on chassis J.
9. Insert the two 35 mm bolts G into receivers H from the outside,
push in fully and attach safety clips I on the inside.
10. Tilt the seat frame until the holes in bracket E on the seat frame
and in fork A on seat tilt drive D are aligned.
11. Insert the 23 mm bolt B into the holes from the outside and attach
safety clip C on the inside.
4.3 Fitting the headrest
IMPORTANT
Retaining bar C can be fitted with the curve to the front or
back, depending on the user's requirements.
The headrest cushion J can be removed and replaced with
other cushion shapes (optional).
To remove the cushion, undo mounting screws I.
1. Twist the screw with hand knob F a little way into brace G.
2. Attach the brace with the screw to the handle of backrest E from
the back in such a way that the screw enters the hole in the handle
of the backrest.
3. Insert plate D into the brace from the front in such a way that the
two lips of the plate face upwards and downwards and the curved
side of the plate meets the handle of the backrest.
IMPORTANT
When inserting the support, the curve of the plate must be
fully flush with the backrest handle.
4. Insert retaining bar C into the recesses of the brace from above.
5. Tighten the screw with hand knob F until the retaining bar is
secure.
6. Insert cushion J together with cushion support B into bracket H
on the retaining bar.
7. Tighten the upper screw with hand knob A until the cushion sup-
port is secure.
Shower and Toilet Commode Ocean E-VIP Assembly and installation
8
4.4 Fitting the chest belt
D
A
B
E
C
IMPORTANT
Install both mounting brackets at the same height.
Installation of the left and right mounting brackets is late-
rally inverted.
1. Open the belt buckle on the backrest cover at the height where the
chest belt is to be fitted.
2. Pass this belt on the inside of the backrest frame and
close it again.
3. Place inner section D of the mounting bracket (without bolt with
internal thread) around the backrest frame so that the hole faces
backwards.
4. Place the outer section B of the mounting bracket with the bolt
with internal thread into the hole of the inner section.
5. Attach the two parts of the mounting bracket in the required posi-
tion with screw C on the backrest frame.
6. Attach chest belt E with the screw with hand knob A to the
mounting brackets.
Adjusting the chest belt position
IMPORTANT
Adjust the position of the chest belt to suit the user.
Adjust the position of the two mounting brackets equally on
both sides.
The position of the right and left mounting brackets is
adjusted in the same way.
1. Open the belt buckle on the backrest cover which is passed on the
inside of the backrest frame at the height where the chest belt is
secured.
2. Open the belt buckle on the backrest cover at the height where the
chest belt is to be fitted.
3. Pass this belt on the inside of the backrest frame and close it again.
4. Undo the screw with hand knob A.
5. Remove chest belt E.
6. Remove the two parts of the mounting bracket B and D and move
them to the required position.
7. Place the inner part of mounting bracket D around the backrest
frame.
8. Place the outer section of mounting bracket B on the bolt with
internal thread C of the inner section.
9. Use the screw with the hand knob to screw the chest belt onto the
mounting bracket.
10. Pass the open belt of the backrest cover on the outside of the back-
rest frame and close it again.
11. Tighten all belts.
Adjusting the chest belt length
IMPORTANT
Adjust the length of the chest belt to suit the user.
The length of the chest belt is adjusted via the belt buckle on the chest
belt. If the belt buckle adjustment range is insufficient, adjust the length
at the mounting brackets as follows:
Shower and Toilet Commode Ocean E-VIPAssembly and installation
9
1. Undo the screw with hand knob A.
2. Select the length of chest belt E.
3. Use the screw with the hand knob to screw the chest belt onto the
mounting bracket.
4.5 Fitting the seat plate
Attachment:
CAUTION Danger of pinching fingers
Do not insert fingers between the seat surface and seat
frame when pressing down the seat plate.
1. Place seat plate A on seat frame B with the cut out facing to the
front.
2. Slide the seat plate back as far as it will go.
3. Using the flat of your hand, press down on the sides and then the
front and back of the seat plate until the seat plate clicks into the
seat frame.
Removal:
1. Pull up the seat plate on both sides.
4.6 Adjusting the backrest cover
IMPORTANT
To attach accessories or the chest belt, open the second
belt buckle from above and pass the backrest cover on the
inside of the backrest frame C at this point.
At least three belts must always go around the outside of
the backrest frame and their buckles must be closed.
The tension of the backrest can be adjusted as desired.
Tightening
1. Tighten belts A on the backrest cover.
Loosening
1. Open belt buckles B by squeezing the retaining lugs together
(arrows).
2. Push the belts back a little through the buckle.
3. Close the buckles.
4. Tighten the belts slightly.
Shower and Toilet Commode Ocean E-VIP Assembly and installation
10
WARNING Risk of injury due to damaged backrest
buckles!
Check for secure fastening of the backrest buckles each time
the product is maintained or reconditioned.
Check all buckle clips for secure fastening by closing the
buckles and pulling on both ends.
Replace the backrest/backrest buckles if a buckle opens
under the applied force.
4.7 Setting the armrest height
A
B
B
C
D
IMPORTANT
Adjust the height of the armrests to suit the user.
Adjust the height of the armrests equally on both sides.
The height of the right and left armrest is adjusted in the
same way.
1. Open the belt buckle on the backrest cover which is passed on the
inside of the backrest frame.
2. Open the belt buckle of belt C on the backrest cover, which is
above the armrest.
3. Pass this belt on the inside of the backrest frame and close it again.
i
The nuts are inserted loosely into the retaining clamp and may
drop out.
4. Undo screws B of armrest bracket A using the Allen key supplied.
5. Remove retaining clamp D with the nuts from the inside of the
backrest frame.
6. Remove armrest bracket A together with the armrest and move it
upwards.
i
The smaller hole is provided to secure the retaining clamp.
7. Insert the screws into the armrest bracket and guide them through
the holes in the backrest frame.
8. If necessary reinsert the nuts into the retaining clamp.
9. Place the retaining clamp on the backrest frame in such a way that
the fixing on the retaining clamp engages in the smaller hole.
10. Turn the screws in the nuts and tighten them.
11. Pass the open belt of the backrest cover on the outside of the
backrest frame, close and tighten all the belts.
IMPORTANT
The armrests are adjusted to the lower position in the same
way.
When adjusting to the lower position, the belt beneath
the armrest must be opened and passed on the inside the
backrest frame.
Shower and Toilet Commode Ocean E-VIPAssembly and installation
11
4.8 Fitting the footrests
IMPORTANT
The right and left footrest are each installed in the same
way.
1. Slide footrest A with footplate B inwards into the guide G on seat
frame F until groove E engages in the pin of clip H. The footrest
should no longer turn to the sides.
Setting the footrest height
1. Pull footrest A up a little.
2. Pull out clip H and reinsert it in the desired position. You may need
to pull the footrest out a little further to do this.
3. Press down the footrest until groove E engages in the pin of the
clip.
4. Adjust the second footrest to the desired height as described.
Removing/attaching the heel straps
1. Open the Velcro® fastener on heel strap D.
2. Remove screw C from the underside of the footplate.
3. Remove the screw and flexible pin with the heel strap.
The heel strap is attached in the reverse order.
IMPORTANT
When installing a footrest, make sure that the Velcro®
fastener of the heel strap faces backwards.
Adjusting the heel strap
IMPORTANT
Make sure that the Velcro® fastener of the heel strap faces
backwards.
1. Open the Velcro® fastener on heel strap D.
2. Set the heel strap to the desired length.
3. Close the Velcro® fastener again.
4.9 Fitting the electronics cover
1. Turn both footrests outwards or remove them.
2. Use the hand control to move the shower and toilet commode to
the highest position; see Section 5.4 Controlling, lifting.
3. Remove terminal strip A.
Shower and Toilet Commode Ocean E-VIP Assembly and installation
12
4. Fold safety bar B forward.
5. Remove the long connector cable C (180 mm) between the battery
pack and electronics box.
6. Attach short connector cable D (110 mm).
7. Fold the safety bar back again.
8. Reattach the terminal strip.
9. Swap blue plug E of the charging socket with the plug with the
hole F.
10. Insert connector G on the electronics cover into charger socket H
of the battery pack.
IMPORTANT
Make sure that the connector is positioned correctly.
11. Attach the front section A to the electronic cover and secure it on
the tube with safety clips B.
12. Attach the rear part of the electronics cover C from above.
Removal:
The electronics cover is removed in the reverse order to installation.
4.10 Removing the battery pack
1. Remove the electronics cover, see 4.9 Fitting the electronics cover,
Removal.
IMPORTANT
Make sure that the connector between
the electronics cover and the battery pack is disconnected.
2. Draw the footrests upwards out of the guides and place them to
one side.
3. Fold safety bar B forward and remove connector C from battery
pack A.
Shower and Toilet Commode Ocean E-VIPAssembly and installation
13
A
4. Insert the connector cable in cable holder A.
5. Use one hand to push back unlocking tab B on the top of battery
pack C .
6. With your other hand, lift the battery pack approx. 5 mm and
draw it out approx. 10 mm.
7. Remove the battery pack from control box A with twist and tilt
movement.
4.11 Charging the battery
The product cannot be used while the battery is charging.
The battery can be charged with the electronics cover attached or
detached and when the battery pack is removed.
WARNING
Never throw the battery pack into the fire or store it near
naked flames.
Never open the battery pack. Opening the battery pack will
void the warranty.
Only connect the charger to the mains when the battery
pack is connected to the charger.
CAUTION Risk of electric shock!
Only recharge the battery in dry rooms and never in the
bathroom.
With the electronics cover removed after charging, close off
the socket on the battery pack with the dust cap.
IMPORTANT
Only use the charger supplied (Aquatec®Ocean E-VIP) to
charge the battery in the battery pack.
Make sure that the voltage specifications shown on the
charger correspond to those of the mains supply.
Follow the instructions in Section 7.3 on how to maintain
the service life of the battery when not in use for a lengthy
period.
G
Shower and Toilet Commode Ocean E-VIP Operation
14
1. Detach cap C from socket B on battery pack A.
IMPORTANT
When the electronics cover is fitted, the charging socket is to
the front (not to the side).
2. Fully insert connector D of charger E into socket B on the battery
pack.
3. Insert mains plug F of the charger into an approved power socket.
Charging takes approx. 5 hours. Yellow indicator lamp G on the hand
control lights up during this time. A trickle charge (pulsed charging) is
applied for approx. 3 hours after this time. Green indicator lamp on
the hand control lights up during this time. The charger controller ter-
minates the charging process after about 8 hours. The indicator lamp
on the hand control goes out. This prevents the battery from being
„overcharged“.
4. Disconnect the charger from the power socket.
5. Disconnect the charger connector from the socket on the battery
pack.
6. Close off the socket with the dust cap.
5 Operation
5.1 Safety information
WARNING
Only use the shower and toilet commode on a flat surface
and indoors.
Observe the specifications on the identification label.
Do not place excessive weight on the shower and toilet
commode.
Always perform a visual inspection of the product for exter-
nal damage before each use.
Do not use a faulty product.
Recharge the battery fully before each use.
Always use the chest belt when transporting a person.
WARNING Risk of slipping and rolling
Before use, make sure that the seat is securely fastened to
the seat frame.
Lock all four wheels using the red foot levers before sitting
into the commode or standing up from it, as well as in the
parking position.
WARNING Risk of tipping
Swivel the footrests to the side before sitting down or
standing up or fold the footplates up.
Before sitting down or standing up, turn the front wheels so
that the brake is to the front.
Never stand on the footrests.
Never remove the spindle drives.
IMPORTANT Risk of breaking the headrest
Only steer or push the shower and toilet commode using
the handle on the backrest, never with the headrest.
5.2 Turning the armrests
CAUTION Danger of getting fingers caught in the folding
mechanism
Do not insert fingers in the articulated joint when folding
the armrests up or down.
Make sure that no parts get caught.
Do not insert fingers between the armrest and the backrest
when folding back the armrests.
Shower and Toilet Commode Ocean E-VIPOperation
15
5.3 Turning the footrests
Mounting position/dismounting position:
1. Draw footrest A in guide B upwards slightly, until the groove is no
longer engaged in the pin of clip C.
2. Turn the footrest to the side.
Driving position:
CAUTION Risk of accident due to loose footrest
Secure the footrests in the driving position.
1. Turn footrest A inwards.
2. Press down the footrest until the groove engages in the pin of
clip C.
5.4 Control
The product is controlled via the hand control.
The device will stop immediately in its current position as soon as the
relevant buttons are released.
For safety reasons, the drives have certain blocked ranges:
Seat height Seat tilt
500 to 600 mm up to 5° forwards
up to 35° backwards
Seat height Seat tilt
over 600 mm no forward movement
up to 35° backwards
IMPORTANT
If the battery in the battery pack is not sufficiently charged,
yellow indicator lamp D on hand control A lights up and an
acoustic signal is heard while moving. After the indicator lamp
lights up, just five more movement cycles can be carried out.
After this, the lifting function of the device is disabled. You
can, however, still lower the device.
Recharge the battery immediately after lowering the device.
CAUTION Danger of pinching fingers
Do not place your fingers between the seat fame and the
front tubular frame of the chassis when tilting or lowering
the seat.
IMPORTANT
If the seat frame is tilted forward, the seat height can be
adjusted to a maximum of 600 mm.
If the seat height is set to more than 600 mm, the seat fame
can no longer be tilted forward.
Shower and Toilet Commode Ocean E-VIP Transport
16
Tilting the seat frame and backrest
The seat frame can be tilted backwards approx. 35° and forwards
approx. 5°.
1. Press reverse button G or forward button C on the hand control.
The seat frame can be tilted backwards or forwards I.
Lifting
1. Press Up button H on the hand control.
The seat frame moves upwards (J).
Lowering
1. Press Down button B on the hand control.
The seat frame moves downwards (J).
Emergency shutdown
IMPORTANT
Only press the red STOP button E on the hand control if the
device does not stop immediately when a button is released
(e.g. if a button jams). The device will stop moving immedia-
tely.
Emergency lowering mechanism
If it is no longer possible to lower the seat frame any further using
the hand control, the seat frame can be lowered using the emergency
lowering mechanism.
1. Press button A on the right side of chassis B.
IMPORTANT
If the seat frame has been lowered using the emergency
lowering mechanism, have the shower and toilet commode
checked by an authorized dealer.
5.5 Engaging the directional locking device
IMPORTANT
Lock the directional locking device on the wheel with the
blue foot lever. The wheel is locked and will only move in
a straight line. The directional locking device only engages
once the wheel is in the straight position.
6 Transport
6.1 Safety information
i
The product can be dismantled into the component parts
listed in the scope of delivery (Section 3.1 Components) for
transport purposes.
For information on how to dismantle the product, see Sec-
tion 4 "Assembly and installation".
IMPORTANT Risk of damage
Transport the product in a dry area at a temperature of
between 0 °C and 40 °C, atmospheric pressure of 795 -
1060 hPa and a humidity of 30 - 75%.
Do not expose the product to direct sunlight.
7 Maintenance
7.1 Maintenance and servicing
If the cleaning and safety notices are observed, the product will be
maintenance free.
The product requires regular safety checks.
Shower and Toilet Commode Ocean E-VIPMaintenance
17
WARNING
Never carry out unauthorized repairs or other work on the
spindles or electric components. If a spindle is damaged or
faulty, contact the dealer immediately.
1. Check the product regularly for damage and to ensure that it is
securely assembled.
2. In the event of damage and/or necessary repairs, contact the dealer
immediately.
3. The product must be checked by an authorized dealer before
every re-use or after 24 months at the latest (see Manufacturer‘s
recommendation for rehab products of the SPECTARIS industrial
association).
7.2 Cleaning and disinfection
The product can be cleaned and disinfected using commercially availa-
ble agents.
IMPORTANT
Hygiene is particularly important in a sensitive area like the
toilet.
Keep the product clean and wash it regularly.
1. Disinfect the product by wiping down all generally accessible sur-
faces with disinfectant (after disassembling the product, if possible).
IMPORTANT
All cleaning agents and disinfectants used must be effective,
compatible with one another and must protect the materials
they are used to clean.
For further information on decontamination in Healthcare
Environments, please refer to ‘The National Institute for
Clinical Excellence’ guidelines on Infection Control www.
nice.org.uk/CG139 and your local infection control policy.
Clean the product by hand.
Do not use abrasive cleaning agents.
Cleaning the seat frame and chassis
CAUTION Risk from electric current
Before cleaning, close off all caps and secure all connectors.
IMPORTANT Risk of damage
Do not remove the accessory holders.
1. Close off all caps and secure all connectors.
2. Remove any attached accessories.
3. Pull the footrests out of the guides.
4. Remove the seat plate and backrest cover.
5. Wash down the individual parts using commercially available
cleaning agents (e.g. all-purpose cleaner) and a cloth or brush.
6. Rinse the parts with warm water.
7. Dry the parts with a cloth.
8. Reassemble the shower and toilet commode.
CAUTION Risk of burning
Allow the shower and toilet commode to cool down after
cleaning.
Cleaning in a clinical environment
CAUTION Risk of burning
Allow the product to cool down after autoclaving.
1. In addition to cleaning as described above, the product should
also be cleaned at regular intervals at 85 °C for 3 minutes in the
autoclave.
Cleaning the backrest cover
1. Remove the backrest cover.
Shower and Toilet Commode Ocean E-VIP After use
18
2. Wash the cover in a washing machine at max. 60°C using a mild
detergent.
IMPORTANT Risk of damage
Washing at high temperatures can cause shrinkage.
Do not dry covers in the tumble dryer.
IMPORTANT
Excessive cleaning can damage textile.
We recommend to change the backrest cover every two
years.
Cleaning the charger and battery pack
CAUTION Risk from electric current
Always disconnect the plug from the power socket before
cleaning the charger.
Never insert objects made of conductive material (e.g.
knitting needles, metal pins) into the sockets of the battery
pack.
Only ever clean the charger with a dry cloth.
1. Wipe down the charger with a dry cloth.
2. Wipe the battery pack with a damp cloth and dry it with a dry cloth.
7.3 Maintaining the performance of the battery
pack
If the device is to be left unused for a lengthy period of time, fully char-
ge the battery in the battery pack (approx. 5 - 6 hours charging time)
and then raise and lower the unoccupied seat frame 3 times. Repeat
this process at least every 6 months. This helps to maintain the service
life of the battery for longer.
7.4 Changing the wheels
WARNING There is a risk of injury if the wheels are not
correctly fitted.
The wheels have to be replaced by a specialist dealer.
7.5 Changing the drives
WARNING There is a risk of injury if the drives are not
correctly fitted.
The drives have to be replaced by a specialist dealer.
8 After use
8.1 Storage
IMPORTANT Risk of damage
Store the product in a dry area at a temperature of
between 0 °C and 40 °C, atmospheric pressure of
795 - 1060 hPa and a humidity of 30 - 75%.
Do not store the product near heat sources.
Do not expose the product to direct sunlight.
8.2 Re-use
The product is suitable for re-use. The number of re-uses depends on
the frequency of use and the manner in which the product was used.
Before re-use, the product should be cleaned and disinfected and be
checked to ensure it is in proper and safe working order. Repair if
necessary.
8.3 Disposal
The disposal and recycling of used products and packaging must be
conducted in accordance with the applicable statutory regulations.
The manufacturer can handle the correct and complete disposal
of the device.
This product contains a rechargeable lead battery.
Old batteries may contain hazardous substances which could be a
danger to the environment and public health. Please take these back
to the dealer or bring them to the local recycling depot.
Batteries can be returned free-of-charge as required by law.
Shower and Toilet Commode Ocean E-VIPTroubleshooting
19
9 Troubleshooting
9.1 Identifying and repairing faults
i
The following table provides information on malfunctions and
their possible causes.
If you cannot correct the malfunction using the remedies
named, please contact your dealer directly.
Fault Possible cause(s) Remedy
An acoustic signal sounds and indi-
cator lamp D on hand control A
lights up while the device is moving
Battery almost exhausted Charge the battery (see Section 4.11)
The "SERVICE" indicator lamp F
on the hand control lights up
Hand control faulty Implement reset (see below)
Software error
Emergency lowering mechanism button faulty
Power failure while moving
Drive faulty
Controller faulty
Emergency lowering mechanism
not working
Battery flat Charge the battery (see Section 4.11) or use a replace-
ment battery
Cable not fully inserted Insert the cable fully
Connector strip not connected Connector strip connected (engaged)
Faulty button Implement reset (see below)
Tilted position of the seat frame The motors were raised to different heights
Hold the Down button B on the hand control until the
drives are fully lowered and you hear the limit switch
click into place
Shower and Toilet Commode Ocean E-VIP Technical data
20
Fault Possible cause(s) Remedy
The seat frame will not move
upwards
or
The seat frame will not move
downwards
or
The seat frame will not tilt
Weight limit exceeded Max. load 150 kg
Cable not correctly inserted Insert the cable correctly
Connector strip not connected Connector strip connected (engaged)
Cable incorrectly attached to controller Motor for tilting always on channel 7
Connector cable broken Replace the cable
Connector cable not fully inserted Insert the cable fully and close the safety bar.
Controller faulty Implement reset (see below)
Battery flat Charge the battery (see Section 4.11) or use a replace-
ment battery
Hand control cable is not inserted correctly Insert the cable fully
Hand control faulty Implement reset (see below)
or
Replace the hand control
Battery will not charge Faulty battery Replace the battery
Connector not correctly inserted Check that all the connectors are positioned correctly
Implementing a reset
1. Hold down the following three buttons simultaneously for about
three seconds on the hand control: Red STOP button E, Forward
button C and Up button H.
An acoustic signal will be heard while the three buttons are held down.
2. When „SERVICE“ indicator lamp F goes out, release the
buttons. The device is ready to use again.
3. Then move the drives for adjusting the height to the lowest positi-
on until you hear the drives switch off.
4. Move the tilt drive to the rear end position until you hear the drive
switch off. (The red LED flashes and an acoustic signal is heard).
IMPORTANT
If the fault recurs after the reset, replace the device or the
faulty parts and send them to us.
10 Technical data
AB
C
D
E
F
G
H
I
J
K
L
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128

Invacare Aquatec Ocean E-VIP Manuale utente

Tipo
Manuale utente