JVC Camcorder Manuale utente

Marca: JVC

Modello: Camcorder

Tipo: Manuale utente

Questo manuale è adatto anche per

2 EN

Dear Customer,

Thank you for purchasing the JVC Compact VHS camcorder. Before use, please read the safety informa-

tion and precautions contained in the following pages to ensure safe use of your new camcorder.

Warning on lithium battery

The battery used in this device may present a

fire or chemical burn hazard if mistreated. Do

not recharge, disassemble, heat above 100°C or

incinerate.

Replace the battery with Maxell, Panasonic

(Matsushita Electric), Sanyo or Sony CR2025;

use of another battery may present a risk of fire

or explosion.

n Dispose of used battery promptly.

n Keep away from children.

n Do not disassemble and do not dispose of in

fire.

PAL

n Camcorder is designed exclusively for the VHS-C video cassette. Only cassettes marked VHS-C can be

used with this unit.

n HQ VHS is compatible with existing VHS equipment.

SAFETY PRECAUTIONS

Using This Instruction Manual

•All major sections and subsections are listed in the Table Of Contents (Z pg. 3).

•Notes appear after most subsections. Be sure to read these as well.

•Basic and advanced features/operation are separated for easier reference.

It is recommended that you . . .

.... refer to the Index (Z pg. 40 – 42) and familiarize yourself with button locations, etc. before use.

.... read thoroughly the Safety Precautions that follow and cautions (Z pg. 43, 44). They contain extremely

important information regarding the safe use of your new camcorder.

CAUTIONS:

n To prevent shock, do not open the cabinet.

No user serviceable parts inside. Refer

servicing to qualified personnel.

n When you are not using the AC Power

Adapter/Battery charger for a long period of

time, it is recommended that you disconnect

the power cord from AC outlet.

WARNING:

TO PREVENT FIRE OR SHOCK

HAZARD, DO NOT EXPOSE

THIS UNIT TO RAIN OR

MOISTURE.

This camcorder is designed to be used with

PAL-type colour television signals. It cannot be

used for playback with a television of a different

standard. However, live recording and

viewfinder playback are possible anywhere.

Use the BN-V12U/V22U/V25U battery packs

and, to recharge them, the provided multi-

voltage AC Power Adapter/Charger. (An

appropriate conversion adapter may be

necessary to accommodate different designs of

AC outlets in different countries.)

NOTES:

●

The rating plate (serial number plate) and

safety caution are on the bottom and/or the

back of the main unit.

●

The rating plate (serial number plate) of the

AC Power Adapter/Charger is on its bottom.

This unit is produced to comply with Standard

IEC Publ. 65.

EN 3

Program Manager

(

pg. 18 – 31)

n Programme AE with Special Effects

(Z pg. 18, 19)

•Auto Mode Lock •Auto Mode Release

•Electronic Fog Filter •ND Effect

•Sepia •Twilight •Sports

•1/1000 sec. High Speed Shutter

•1/2000 sec. High Speed Shutter

n 5Sec.-Rec (5 sec. Recording)

(Z pg. 15)

22x Optical Hyper Zoom (

pg. 14)

n Intergrated Auto Light (Z pg. 16)

CONTENTS

EN 3

GETTING STARTED

Power .............................................. 4

Clock (Lithium) Battery Insertion/Removal..... 6

Date/Time Setting ................................ 7

Tape Length Setting ............................... 8

Recording Mode Setting .......................... 8

Loading/Unloading A Cassette .................. 9

Grip Adjustment ................................. 10

Viewfinder Adjustment ......................... 10

Shoulder Strap Attachment .................... 11

Tripod Mounting ................................. 11

RECORDING

Basic Recording ................................. 12

Basic Features .................................. 14

Advanced Features ............................. 18

PLAYBACK

Basic Playback .................................. 32

Features ......................................... 33

Using The Cassette Adapter .................. 35

Basic Connections .............................. 36

TAPE DUBBING

TROUBLESHOOTING

INDEX

Controls ......................................... 40

Connectors ...................................... 40

Indicators ........................................ 40

Other Parts ..................................... 40

Viewfinder Indications ........................ 42

CAUTIONS

SPECIFICATIONS

MAJOR FEATURES

PROVIDED ACCESSORIES

•AC Power Adapter/

Charger AA-V15EG

•Cassette Adapter

C-P7U

•Battery Pack

BN-V12U

•Lithium Battery

CR2025 x 1

(clock operation)

•Shoulder Strap

•AUDIO/VIDEO

(A/V) Cable

•DC Cord

The Logical Choice

The only compact video cassettes that can be used with

your VHS VCR*

*With Cassette Adapter

4 EN

GETTING STARTED

Power

This camcorder’s 3-way power supply system lets you

choose the most appropriate source of power.

NOTES:

●

No function is available without power supply.

●

Use only specified power supply.

●

Do not use provided power supply units with other

equipment.

CHARGING THE BATTERY PACK

SUPPLY POWER

Connect the charger’s AC power cord to a wall

outlet.

ATTACH BATTERY PACK

Align the marks and slide the battery pack in the

direction of the arrow until it locks in place.

•The CHG. indicator begins blinking to indicate

charging has started.

DETACH BATTERY PACK

When the CHG. indicator stops blinking but stays lit,

charging is finished. Slide the battery pack opposite

the direction of the arrow.

REFRESH

The AC power adapter features a REFRESH

function that allows you to fully discharge

the battery pack before recharging.

Perform the REFRESH function after no less

than 5 chargings.

To discharge the battery . . .

..... attach the battery pack to the adapter

as shown in the above illustration.

Then push REFRESH. The REFRESH

indicator lights when discharging

starts, and goes out when discharging

is complete.

CHG. (charge)

indicator

Marks

To AC outlet

REFRESH indicator

REFRESH switch

BATT. PACK

CHARGE DISCHARGE

BN-V12U approx. 1 hr. 10 min. approx. 3 hrs. 30 min.

BN-V22U approx. 2 hrs. 10 min. approx. 7 hrs.

BN-V25U approx. 2 hrs. 40 min. approx. 10 hrs.

Push in.

Hook on.

BATT. RELEASE

ATTENTION:

Before detaching the power source,

make sure that the camcorder’s power

is turned off. Failure to do so can result

in a camcorder malfunction.

USING THE BATTERY PACK

ATTACH BATTERY PACK

Hook its top end to the camcorder and push the

battery pack in until it locks in place.

DETACH BATTERY PACK

Slide BATT. RELEASE and pull out the battery pack.

BATT. PACK Approximate recording time (unit: min.)

BN-V12U 75 (40)

BN-V22U 155 (95)

BN-V25U 200 (120)

( ) : when the video light is on.

EN 5

CHARGE MARKER

A charge marker is provided on the battery pack to

help you remember whether it has been charged or

not. Two colours are provided (red and black)—you

choose which one means charged and which

means discharged.

NOTES:

●

The recording time per charge is affected by such factors as the time spent in Record-Standby mode and

the frequency of zooming. It is safer to have spare battery packs.

●

Charging times noted on page 4 are for fully discharged battery pack, and discharging times are for fully

charged battery pack.

●

Charging and discharging times vary according to the ambient temperature and the status of the battery pack.

●

Remember to set the charge marker after charging a battery pack or after detaching a discharged one from

your camcorder.

●

Perform the REFRESH function after no less than 5 chargings.

●

While the AC Power Adapter/Charger’s power cord is disconnected from the AC outlet, it is possible to

discharge the battery by pressing the REFRESH switch. During that time, the AC Power Adapter/Charger

does not charge the battery. When disharging is complete, detach the battery from the AC Power Adapter/

Charger to store it.

●

High temperatures can damage the battery pack, so use only where good ventilation is available. Don’t

allow it to discharge in container, such as a bag.

●

If you stop recharging or discharging part way through, make sure to remove the battery pack before

unplugging the adapter’s AC cord.

●

Remove the battery pack from the adapter immediately after discharging.

●

To avoid interference with reception, do not use the AC Power Adapter/Charger near a radio.

●

Make sure you unplug the DC cord before charging or discharging the battery pack.

●

The CHG. indicator may not light properly with a brand new battery pack, or with one that’s been stored

for an extended period. In this case, remove and reattach the battery pack and recharge it. The CHG.

indicator should blink during recharging. If not, contact your nearest JVC dealer.

To DC IN jack

DC cord

DC OUT

terminal

To car’s

cigarette

lighter socket

AC Power

Adapter/Charger

AA-V15EG

Car Battery Charger/Adapter

BH-V3E (optional)

To AC outlet

USING A CAR BATTERY

Use the optional Car Battery Charger/Adapter

(connect as shown in the illustration above).

NOTES:

●

When using the car battery, leave the engine idling.

●

The optional Car Battery Charger (BH-V3E) can

also be used to charge the battery pack.

●

When using the optional Car Battery Charger,

refer to the respective instruction booklet.

USING AC POWER

Use the AC Power Adapter (connect as shown in

the illustration above).

NOTE:

The supplied AC Power Adapter/Charger features

automatic voltage selection in the AC range from

110 V to 240 V.

Charge marker

6 EN

GETTING STARTED

(cont.)

Clock (Lithium) Battery Insertion/Removal

This battery is necessary for clock operation and to

perform date/time settings.

SWITCH OFF POWER

Switch off the unit’s power and remove the power

supply unit.

OPEN COVER

Open the clock battery compartment cover while

pressing the release tab.

REMOVE BATTERY (when replacing)

Insert a pointed, non-metallic object between the

battery and the compartment (

) and pull the

battery out.

INSERT BATTERY

Ensure that the plus (+) side is up and insert a

CR2025 lithium battery and push it in.

CLOSE COVER

Close the compartment cover until it clicks in place.

NOTE:

See “SAFETY PRECAUTIONS” (

pg. 2) for information

on safe handling of lithium batteries.

EN 7

Date/Time Setting

ACCESS MENU SCREEN

First set the Power Switch to “CAMERA”. Turn the

Select Dial to any position except AUTO LOCK,

then press the MENU Jog Dial.

SELECT FUNCTION

Rotate the MENU Jog Dial to move the highlight bar

to “DATE/TIME”, then press it. The DATE/TIME

Setting Menu appears.

•If you decide you want to return the date and time

to the previous settings, rotate the MENU Jog Dial

to move highlight bar to “EXIT” and press it, then

go to step 6.

•If you want to set only the time without changing

the date, go to step 4.

SET DATE

Rotate the MENU Jog Dial to move the highlight bar

to the item you want to set and then press it. When

the setting begins blinking, rotate the MENU Jog

Dial until the correct setting appears and then press

it. The setting stops blinking.

•Repeat this procedure until you’re satisfied with

the Date settings (“YEAR”, “MONTH” and “DAY”).

SET TIME

Rotate the MENU Jog Dial to move the highlight bar

to “TIME” and then press it. When the hour setting

begins blinking, rotate the MENU Jog Dial until the

correct setting appears and then press it. When the

hour setting stops blinking and the minute setting

begins blinking, rotate the MENU Jog Dial until the

correct setting appears and then press it. The minute

setting stops blinking.

START CLOCK OPERATION

When none of these settings (YEAR, MONTH, DAY,

TIME) blinks, rotate the MENU Jog Dial to move the

highlight bar to “EXIT”, and press it. The Menu

Screen appears and “MENU END” is highlighted.

CLOSE MENU

Press the MENU Jog Dial.

NOTE:

To display the date and time in the viewfinder and on a

connected TV, see “Date/Time/Character Insert”

(

pg. 17).

DATE TIME

YEAR

MONTH

DAY

TIME

EXIT

1998

22:50

MENU END

FOCUS

EXPOSURE

DATE TIME

TELE MACRO

TAPE LENGTH

M. W. B.

ZOOM SPEED

AUTO

25. 12. 98

OFF

T30

AUTO

FAST

MENU END

FOCUS

EXPOSURE

DATE TIME

TELE MACRO

TAPE LENGTH

M. W. B.

ZOOM SPEED

AUTO

1. 1. 98

OFF

T30

AUTO

FAST

Select Dial

Jog Dial

Viewfinder

24-hour

indication

Menu Screen

DATE/TIME Setting Menu

8 EN

GETTING STARTED

(cont.)

Tape Length Setting

Set the tape length according to the length of the tape

used.

ACCESS MENU SCREEN

First set the Power Switch to “CAMERA”. Turn the

Select Dial to any position except AUTO LOCK,

then press the MENU Jog Dial.

SELECT FUNCTION

Rotate the MENU Jog Dial to move the highlight bar

to “TAPE LENGTH”, then press it. The TAPE

LENGTH Setting Menu appears.

SET TAPE LENGTH

Rotate the MENU Jog Dial to move the highlight bar

to the correct setting. T30=30 minutes of recording

time, T45=45 minutes, and T60=60 minutes (in SP).

•If you decide you want to return the tape length to

the previous setting, rotate the MENU Jog Dial to

move the highlight bar to “EXIT”.

CLOSE MENU

Press the MENU Jog Dial. The Menu Screen

reappears and the highlight bar is on “MENU END”.

Then press the MENU Jog Dial again to close the

Menu Screen.

NOTES:

●

The tape remaining time (

pg. 13) is correct only if

the correct tape length has been selected.

●

Once you have set the tape length, it remains un-

changed even if the Select Dial is returned to AUTO

LOCK.

Recording Mode Setting

Set depending on your preference.

SET RECORDING MODE

First set the Power Switch to “CAMERA”. Press SP/LP

Button for more than 1 second. “SP” (Standard Play)

provides higher picture and sound quality and is

better for dubbing, while “LP” (Long Play) is more

economical, providing two times the recording time.

NOTE:

If the recording mode is switched during recording, the

playback picture will be blurred at the switching point.

MENU END

FOCUS

EXPOSURE

DATE TIME

TELE MACRO

TAPE LENGTH

M. W. B.

ZOOM SPEED

AUTO

25. 12. 98

OFF

T60

AUTO

FAST

MENU END

FOCUS

EXPOSURE

DATE TIME

TELE MACRO

TAPE LENGTH

M. W. B.

ZOOM SPEED

AUTO

25. 12. 98

OFF

T30

AUTO

FAST

T30

T45

T60

EXIT

TAPE LENGTH

T30

Menu Screen

TAPE LENGTH Setting Menu

Viewfinder

MENU Jog Dial

Tape length

indicator

Recording

mode

indicator

SP/LP Recording

Mode Button

Select Dial

EN 9

Erase Protection

Gear

Turn to take

up slack.

Loading/Unloading A Cassette

OPEN CASSETTE HOLDER

Slide EJECT until the holder opens. Do not use force

to open.

INSERT/REMOVE CASSETTE

Make sure the label is facing outward.

CLOSE CASSETTE HOLDER

Press PUSH and make sure the holder is closed and

locked.

NOTES:

●

A cassette holder can’t be opened unless a power

supply is attached.

●

Make sure that the tape is not slack when loading the

cassette. If there is any slack, turn the gear on the

cassette in the direction of the arrow to take up the

slack.

●

Make sure the Erase Protection tab is in the position

that allows recording. If not, slide the tab. Some

cassettes have removable tabs. If the tab has been

removed, cover the hole with adhesive tape.

●

The cassette holder can’t be opened while the

camcorder is in the record mode.

10 EN

GETTING STARTED

(cont.)

Grip Adjustment

EXPAND LOOP

Separate the Velcro strip.

INSERT HAND

Pass your right hand through the loop and grasp the

grip.

ADJUST STRAP LENGTH

Adjust so your thumb and fingers can easily operate

the Recording Start/Stop Button and Power Zoom

Button. Refasten the Velcro strip.

Viewfinder Adjustment

POSITION VIEWFINDER

Adjust the viewfinder manually for best viewability

(see illustration to the left).

SELECT MODE

Set the Power Switch to CAMERA.

ADJUST DIOPTRE

Turn the Dioptre Adjustment Control until the

indications in the viewfinder are clearly focused.

Recording Start/Stop Button

Power Zoom Button

Set POWER to “CAMERA”.

EN 11

CAUTION:

When using a tripod, be sure to open and extend

its legs fully to stabilize the camcorder. To

prevent damage to the unit caused by falling

over, do not use a small-sized tripod.

Tripod Mounting

ALIGN AND TIGHTEN

Align the screw and camera direction stud on the

tripod with the camera’s mounting socket and stud

hole. Then tighten the screw.

Shoulder Strap Attachment

ATTACH STRAP

Following the illustration at left, thread the strap

through the top of the eyelet 1, then fold it back

and thread it through the keeper 2, and then

through the buckle 3. Repeat the procedure to

attach the other end of the strap to the other eyelet

4, making sure the strap isn’t twisted.

ADJUST LENGTH

Adjust as shown in the illustration at left 1, then

slide both keepers snug against the eyelets to

prevent slipping 2.

12 EN

RECORDING

Basic Recording

NOTE:

You should already have performed the procedures listed

below. If not, do so before continuing.

●

Power (

pg. 4)

●

Tape Length Setting (

pg. 8)

●

Recording Mode Setting (

pg. 8)

●

Grip Adjustment (

pg. 10)

LOAD A CASSETTE

Slide EJECT to open the cassette holder, then insert

the cassette with the label facing out. Press PUSH to

ensure the holder is closed and locked.

ENTER RECORD-STANDBY MODE

Slide the LENS COVER Open/Close Switch to open

the lens cover, then set the Power Switch to

CAMERA.

•The power indicator lights and the camcorder

enters the Record-Standby mode.

•The scene you’re aimed at appears on the

viewfinder screen, with the word “PAUSE”

superimposed upon it.

START SHOOTING

Press the Recording Start/Stop Button.

•“

REC

” appears in the viewfinder while recording is

in progress.

Power

indicator

Tally lamp

(lights while recording is in progress)

Power Switch

Start/Stop Button

LENS COVER Switch

EN 13

STOP RECORDING

Press the Recording Start/Stop Button again to stop

recording.

•The camcorder re-enters the Record-Standby

mode.

NOTES:

●

A cassette holder can’t be opened unless a power

supply is attached.

●

There may be a delay after you slide EJECT until the

holder opens. Do not use force.

●

The displayed remaining time is approximate.

●

The time required to calculate the remaining tape

length, and the accuracy of the calculation, may vary

according to the type of tape used.

●

The tape remaining time indicator is correct only if the

correct tape length has been selected (

pg. 8).

●

“TAPE END” appears when the tape reaches its end,

and the power goes off automatically if left in this

condition for 5 minutes. “TAPE END” also appears

when a cassette whose tape is already at its end is

loaded.

●

If the Record-Standby mode continues for 5 minutes

without performing Zoom or any other operations, the

camcorder’s power shuts off automatically. Set the

Power Switch to “POWER OFF”, and then back to

“CAMERA” to turn the camcorder on again.

●

If the Recording Start/Stop Button is pressed after the

Record-Standby mode has continued for over

5 minutes, recording may not start immediately.

●

If you’re recording on a cassette from the middle (such

as when a tape is removed and re-inserted during

recording), use the Retake function (

pg. 15) to find

the end of the last recording so you don’t erase any of

it.

●

The LENS COVER warning blinks for about 5 seconds

when the camcorder is turned on when the cover is

closed.

25MIN

120MIN

119MIN

3MIN

2MIN

1MIN

0MIN

MIN

Tape remaining time indicator

(Blinking)

Start/Stop Button

(Now calculating)

14 EN

RECORDING

Basic Features

FEATURE: Zooming

PURPOSE: To produce the zoom in/out effect, or

an instantaneous change in image

magnification.

OPERATION:

Zoom In

Press the “T” of the Power Zoom

Button.

Zoom Out

Press “W” of the Power Zoom

Button.

n Zooming speed is available. A total

of 4 zoom speeds are available. 2

speeds can be selected depending

on how hard the Power Zoom

Button is pressed (press the button

fully for regular-speed, press it

lightly for slow-speed), while 2

speed levels (FAST/SLOW) can be

selected in the ZOOM SPEED

Menu depending on the overall

speed you prefer.

The combinations of zoom speeds

are shown in the chart below.

Changing the ZOOM SPEED in the

1) Set the Select Dial to any position

except AUTO LOCK and press the

MENU Jog Dial. The Menu Screen

appears.

2) Rotate the MENU Jog Dial to move

the highlight bar to “ZOOM

SPEED”, then press it. The ZOOM

SPEED Setting Menu appears.

3) Rotate the MENU Jog Dial to move

the highlight bar to the desired

speed and press it twice. The

Menu Screen disappears and

setting is completed.

NOTE:

Focusing may become unstable

during Zooming. In this case, set the

zoom while in Record-Standby, lock

the focus by using the manual focus

(

pg. 27), then zoom in or out in

Record mode.

MENU END

FOCUS

EXPOSURE

DATE TIME

TELE MACRO

TAPE LENGTH

M. W. B.

ZOOM SPEED

AUTO

25. 12. 98

OFF

T30

AUTO

FAST

ZOOM SPEED

FAST

SLOW

EXIT

Zoom-out

Zoom-in

Menu Screen

Zoom indicator bar

: when the Select Dial is set to AUTO LOCK.

Zooming Speed ( 1 – 4 in order of speed)

“ZOOM SPEED”

in the Menu

Screen

Pressing the

Power Zoom Button

fully lightly

FAST 1 (fastest) 3

SLOW 2 4 (slowest)

ZOOM SPEED Setting Menu

Select Dial

Power Zoom button

MENU Jog Dial

Viewfinder

EN 15

FEATURE: Quick Review

PURPOSE: To check the end of the last

recording.

OPERATION: 1) Press “ ” and release quickly

during the Record-Standby mode.

n Tape is rewound for about 2

seconds and played back

automatically, then pauses in

Record-Standby mode for the

next shot.

NOTE:

Distortion may occur at start of

playback. This is normal.

FEATURE: Retake

PURPOSE: To re-record certain segments.

OPERATION: 1) Make sure the camcorder is in the

Record-Standby mode.

2) Press either RETAKE button to

reach the start point for new

recording. Pressing “F” forwards

the tape and pressing “R” reverses

it.

3) Press Recording Start/Stop Button

to start recording.

NOTE:

Noise may appear during Retake.

This is normal.

FEATURE: 5Sec. Rec (5-sec. Recording)

PURPOSE: To record a scene for 5 seconds,

providing quick scene transitions like

those seen in TV programmes.

OPERATION: 1) During Record-Standby, press

5SEC. REC. “

5S” appears and

5Sec. Rec is reserved.

2) Press Recording Start/Stop Button.

Recording starts, and after

5-second recording is finished, the

camcorder reenters the Record-

Standby mode automatically.

n To cancel the 5Sec. Rec.

function, press 5SEC. REC again

so that “ 5S” disappears.

NOTE:

The Fader (

pg. 20) cannot be

activated by pressing 5SEC. REC.

PAUSE

5SEC. REC

RETAKE (R/F)

Viewfinder

5Sec. Rec mode indicator

16 EN

RECORDING

Basic Features (cont.)

FEATURE: Video Light

PURPOSE: To brighten the scene when natural

lighting is too dim.

OPERATION: 1) Set the LIGHT OFF/AUTO/ON

Switch as required:

ON : Always keeps the light on

as long as the camcorder

is turned on.

AUTO : Automatically turns on

the light when the

camcorder senses

insufficient lighting on the

subject.

OFF : Turns off the light.

n The video light can only be used

with the camcorder’s power on.

n It is recommended to set the

white balance (Z pg. 29) to

HALOGEN mode ( ) when you

use the video light.

n When not using the video light,

turn it off to save battery power.

NOTES: ●

Even if the battery indicator ( )

does not blink if the battery pack’s

charge is low, the camcorder may

turn off automatically when you

turn on the video light, or when

you start recording with the video

light turned on.

●

When the LIGHT OFF/AUTO/ON

Switch is set to “AUTO”:

•

Depending on the lighting

conditions, the video light may

keep turning on and off. In this

case, manually switch the light

on or off using the LIGHT OFF/

AUTO/ON switch.

•

While the Sports or High-Speed

Shutter mode (

pg. 19) is

engaged, the light is likely to stay

on.

•

While the Twilight mode

(

pg. 19) is engaged, the light

will not activate.

DANGER

n The video light can become extremely

hot. Do not touch it either while in

operation or soon after turning it off,

otherwise serious injury may result.

n Do not place the camcorder into the

carrying case immediately after using

the video light, since it remains

extremely hot for some time.

n When operating, keep a distance of

about 30 cm. between the video light

and people or objects.

n Do not use near flammable or explosive

materials.

n It is recommended that you consult your

nearest JVC dealer for replacing the

video light.

LIGHT OFF/AUTO/ON

EN 17

FEATURE: Date/Time/Character Insert

PURPOSE: To display the date and time in the

viewfinder or on a connected colour

monitor, as well as to record them

manually or automatically.

OPERATION: 1) Turn the Select Dial to any

position except AUTO LOCK.

2) Choose a display mode by

pressing DATE/TIME repeatedly

while in Record-Standby to cycle

through the modes as shown in the

illustration to the left.

n You should have already

performed the Date/Time Setting

procedure (Z pg. 7). If you

haven’t, do so first.

NOTES:

DISPLAY

●

The selected display can be

recorded.

●

If you don’t want to record the

display, select the Date-off mode

before shooting.

●

If you want to delete the display

during shooting, press DATE/TIME.

●

To recall the display, engage the

Record-Standby mode and press

DATE/TIME repeatedly until the

desired display appears.

AUTO DATE RECORD

●

Your camcorder automatically

records the date for about 5

seconds after recording is initiated

in the following situations:

•

After changing the date.

•

After loading a cassette.

•

After Auto Date Record mode is

selected by pressing DATE/TIME.

In this mode, the date is replaced

after 5 seconds with “AUTO DATE”

but this is not recorded.

●

Setting the Select Dial to AUTO

LOCK always engages the Auto

Date Record mode, and disables

all other modes.

Auto Date

Record mode

Date-off mode

(No display)

Date display

Time display

Date/Time display

The characters you have set using

Character Generator (

Z pg. 22)

22:50:00

Date display

Time display

Date/Time display

25.12.98

22:50:00

Auto date record mode

Auto date record

executed

25.12.98

AUTO DATE

Auto Date Record mode

DATE/TIME

Select Dial

Display

18 EN

SEPIA

WIDE TITLE

EFFECT

SUPER

LOLUX

Programme AE With Special Effects

All you have to do to access any of the variety of

shooting effects is to turn the Select Dial.

SELECT MODE

Turn the Select Dial until the symbol of the function

you want is aligned with the mark.

•The selected mode’s name and its indication are

displayed for approx. 1 second. Then the name

disappears, and only the indication remains. The

mode is activated.

•When Auto Mode Lock or Auto Mode Release

mode is selected, only the mode’s name is

displayed. Then the name disappears and the

mode is activated.

NOTES:

●

Only one effect can be engaged at a time.

●

The screen becomes slightly reddish when the Fader

(

pg. 20) is used in the Sepia mode.

●

The screen becomes slightly dark in the High Speed

Shutter mode. Use in well-lit situations.

●

In the High Speed Shutter or Sports modes, picture

colour may be adversely affected if subject is lit by

alternating discharge-type light sources such as

flourescent or mercury-vapour lights.

RECORDING

Advanced Features

1 second later, the mode is activated.

Viewfinder

After 1 sec.

Mark

Select Dial

EN 19

Dial Viewfinder

Mode

symbol indication

Auto Mode Lock

LOCK AUTO LOCK

Auto Mode Lock

Locks the camcorder in Full Auto mode, preventing

incorrect operation due to accidental button

pressing during shooting.

•In this mode the following controls are disabled;

DATE/TIME display select, and the Menu Jog Dial.

Auto Mode Release

RELEASE AUTO RELEASE

Auto Mode Release

Re-enables the controls that were disabled by Auto

Mode Lock.

Electronic

Fog Filter

FG FG : FOG

Electronic Fog Filter

Makes the picture look misty white, as when an

external fog filter is attached to the lens. Softens the

image and gives it a “fantasy” look.

ND Effect

ND ND:ND EFFECT

ND Effect

A black mist darkens the picture, as when an ND

filter is used. Helps to counter the effects of glare on

the subject.

Sepia

SEPIA

Sepia

The scene being shot is recorded in sepia-tinted

(reddish-brown) monochrome, giving the effect of

an older movie. Use together with Wide (Z pg. 20)

for the authentic look of a classic Hollywood

movie.

Dial Viewfinder

Mode

symbol indication

Twilight

TWILIGHT

Twilight

Dusk, twilight scenery, fireworks, etc., look more

natural and dramatic. The following happens when

Twilight mode is selected:

•Auto gain control is turned off.

•White Balance is set to “ ” (FINE day mode), but

can also be manually changed to another mode

(Z pg. 29).

•Auto Focus becomes available only in the range of

10 m to infinity. To focus when the subject-to-

camera distance is less than 10 m, use manual

focusing (Z pg. 27).

Sports

SPORTS

Sports

High shutter speed clearly captures fast-moving

action.

1/1000 sec.

High Speed Shutter

1/1000 S 1/1000

1/2000 sec.

High Speed Shutter

1/2000 S 1/2000

High-Speed Shutter (1/1000s., 1/2000s.)

Captures faster action than Sports mode.

20 EN

RECORDING

Advanced Features (cont.)

Fader

This feature allows smooth fade-in and fade-out to black

blank screen. Fade-in works at recording start, and fade-

out works at recording end or when you enter Record-

Standby mode.

ENGAGE FADE-STANDBY MODE

Press EFFECT to engage the Fade-Standby mode.

•“

FADER” is displayed for approx. 2 seconds.

Then “FADER” disappears, and only “

” remains.

START OR END RECORDING

Press Recording Start/Stop Button to activate fade-in

or fade-out.

TO CANCEL FADE-STANDBY

MODE

While

“

”

is displayed, press EFFECT.

•“OFF” is displayed for approx. 2 seconds and the

fade-standby mode is cancelled.

NOTES:

●

Pressing and holding the Recording Start/Stop Button

allows you to record a black blank screen.

●

The screen becomes slightly reddish when the Fader is

used with Sepia (

pg. 19).

●

With the Electronic fog filter mode (

pg. 19) engaged,

the image fades in/out to a white screen.

Wide mode

Viewfinder

Wide

This feature allows you to record black bars at the top

and bottom of the screen to produce a cinema-like

“wide-screen” effect.

ENGAGE WIDE MODE

Press WIDE.

•To restore normal screen, press WIDE again.

NOTE (for Fader, Wide, Super LoLux, and Instant Titles) :

When the Select Dial is turned to AUTO LOCK, the above functions will be set to the Factory settings

(Fade-standby : “OFF”, Wide mode : off, Super LoLux : “MAX”, Instant Titles : off). Then when the Select

Dial is returned to any position except AUTO LOCK, the above functions return to the settings you

selected before turning it to AUTO LOCK. However, if the function is switched during AUTO LOCK, the

selected mode will be set and will remain unchanged even when the Select Dial is turned to any

position except AUTO LOCK.

FADER

EFFECT

Fade-in

Fade-out

After 2 sec.

Viewfinder

Recording

Start/Stop

Button

EFFECT

WIDE

EN 21

Super LoLux(Gain Up)

Bright, natural recordings can be taken even in areas with

low or poor lighting.

SELECT SUPER LOLUX MODE

Press SUPER LOLUX repeatedly to cycle through the

modes as shown to the left. Once the desired mode

appears, it is engaged.

•The mode’s name is displayed for approx. 2

seconds, then disappears.

MAX : To record a subject in a dark lit environ-

ment. When it is more convenient to

shoot the subject with a brighter image

even if the picture becomes slightly

coarse.

NORM : To record a subject in a dimly lit environ-

ment. When it is more convenient to

shoot with a less coarse picture although

the subject becomes slightly dark.

OFF : Allows you to shoot dark scenes with no

picture brightness adjustment.

MOVIE STAR

HAPPY BIRTHDAY No display

HAPPY HOLIDAYS

OUR FAMILY

PARTY TIME

MERRY CHRISTMAS

WEDDING DAY

CONGRATULATIONS

The characters you have set using

Character Generator (Z pg. 22)

S.LX

MAX

NORM

OFF

Viewfinder

After 2 sec.

SUPER LOLUX

TITLE

Viewfinder

Title display

Instant Titles

The camcorder has eight preset titles in memory. You can

superimpose one of them above a previously stored title

as shown in the illustration to the left.

SELECT PRESET TITLE

Press TITLE repeatedly to cycle through the preset

titles until the desired title is displayed.

La pagina sta caricando ...

JVC Camcorder Manuale utente

Marca: JVC

Modello: Camcorder

Tipo: Manuale utente

Questo manuale è adatto anche per

Scarica il pdf

rapporto

in altre lingue

English: JVC Camcorder User manual

JVC Camcorder Manuale utente

Questo manuale è adatto anche per

JVC Camcorder Manuale utente

in altre lingue

Documenti correlati

Altri documenti