Motorola TLKR T8 Manuale del proprietario

CH

OK

MENU

GRP

Manuel de l’utilisateur TLKR T8

TLKR T8 Benutzerhandbuch

Manual del usuario de TLKR T8

TLKR T8 – Manuale per l’utente

Manual do Propriátrio TLKR T8

TLKR T8 Gebruikershandleiding

TLKR T8 Owner’s Manual

Instrukcja obsugi radiotelefonu TLKR T8

TLKR T8 Kullanc Klavuzu

TLKR T8  

Ägarhandbok TLKR T8

Brukerhåndbok TLKR T8

Käyttöohje TLKR T8

Brugervejledning TLKR T8

1

English

CONTENTS

Product Safety and RF Exposure . . . . . . . . . . . . . . . . . . . . . 2

Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Control and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Install the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Battery Level and Low Battery Alert. . . . . . . . . . . . . . . . . . . . 5

Charging the Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Direct Charge. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Using the Charging Cradle. . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Charging the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Using the Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Turning On the Radio and Volume Adjust . . . . . . . . . . . . . . 6

Talking on your Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Navigating through the Menu . . . . . . . . . . . . . . . . . . . . . . . . 6

Select Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Choosing a Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Choosing a Sub-code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Dual Watch Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Stopwatch Activation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Mode Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Clock Feature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Channel Scan Feature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Monitor Mode Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Voice Operated Transmission . . . . . . . . . . . . . . . . . . . . . . . 10

Transmitting a Ring Tone . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Vibe (Vibration) Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Slnt (Silent) Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Key Tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

PTT (Roger Tone) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Automatic Power Save Feature . . . . . . . . . . . . . . . . . . . . . .12

Auto Power Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Room Monitor Feature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Group Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Clock Feature in Group Mode . . . . . . . . . . . . . . . . . . . . . . . .13

Set ID Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Set ID Number. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Set Monitor in Group Mode . . . . . . . . . . . . . . . . . . . . . . . . . .14

Set Ring Tone in Group Mode. . . . . . . . . . . . . . . . . . . . . . . .15

Set Key Tone in Group Mode . . . . . . . . . . . . . . . . . . . . . . . .15

Set PTT in Group Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Set Auto Power Off in Group Mode . . . . . . . . . . . . . . . . . . . .15

Group Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Auto Channel Change Setting . . . . . . . . . . . . . . . . . . . . . . . .16

Manual Channel Change Setting. . . . . . . . . . . . . . . . . . . . . .16

Set All/Direct Call. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Set All Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Set Direct Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Key Lock Activation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Battery Low Alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

LCD Backlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Frequency Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

CTCSS Chart (Hz). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

DCS Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Warranty Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

What Is Not Covered by the Warranty. . . . . . . . . . . . . . . . . .20

Copyright Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

2

English

Product Safety and

RF Exposure for Portable

Two-Way Radios

ATTENTION!

Before using this product, read the RF energy awareness

information and operating instructions in the Product Safety

and RF Exposure booklet to ensure compliance with RF

energy exposure limits.

Features

8 PMR Channels

121 Sub-Codes (38 CTCSS Codes & 83 DCS)

Up to 10 km Range*

LED Torch

Internal VOX Circuitry

10 Selectable Ring Tone Alert

Backlight LCD Display

Headset Jack for Optional Headset

PTT Roger Beep

Clock timer

Room Monitor

Channel Scan

Dual Watch

Keypad Lock

Battery Save Power

Silent Mode

Battery Low Alert

Group Call

Direct Call (Caller ID Call)

All Call

Auto Channel Change

* Range may vary depending on environmental and/or topographical

conditions.

Before using this product, read

the operating instructions for safe

usage contained in the Product

Safety and RF Exposure booklet

enclosed with your radio.

!

Caution

3

English

Control and Functions

LED Torch button

Antenna

PTT (Push-To-Talk) Key

MENU/GRP Key

Speaker

Microphone

DC IN 9V Jack

Volume Knob with

Power switch

/ (Call/Lock) Key

(Vol/Channel

Up) Key

(Vol/Channel

Down)

Ch/Stopwatch Key

OK

4

English

Display

1. Time/Menu/Group selection indicator

2. Scan indicator

3. Key tone indicator

4. Keypad lock indicator

5. Silent (Ringer Off) indicator

6. Battery charge indicator

7. Battery level meter

8. Monitor indicator

9. Vibrator indicator

10. Room monitor indicator

11. VOX indicator

12. Transmit indicator

13. Receive indicator

14. Up/Down (Channel/Menu mode selection) indicator

15. Pause (Stopwatch) indicator

16. Code (Sub-code number) indicator

17. Up/Down (sub-code/group selection number) indicator

18. 2CH (Dual channel) indicator

19. Sub-code number/Group selection indicator

20. GRP (Group mode) indicator

21. CH (Main Channel indicator)

22. Colon (display in Clock/Stopwatch) indicator

5

English

Congratulations on your purchase of the TLKR T8 radio.

This product is a lightweight, durable radio. Use it at

sporting events to stay in contact with family and friends,

hiking, skiing, outdoors, for vital communication. This

compact, state-of-the-art device is equipped with many

features.

Package Contents

Your package contains two TLKR T8 radios, two belt clips,

one charging cradle, AC adapter, two battery support

brackets, two rechargeable NiMH battery packs and this

reference guide. You may operate the unit with 4 AAA

alkaline batteries (not included).

Install the Battery

Your TLKR T8 radio uses the NiMH battery pack or 4 AAA

alkaline batteries (not included). If alkaline batteries are

used, we recommend using high quality alkaline batteries.

To install the NiMH battery pack:

1. Make sure your radio is OFF.

2. Remove the battery compartment door by pressing the

tab at the bottom of the compartment door, allowing the

door to be removed.

3. Install the NiMH battery pack into the battery compart-

ment. Be certain to follow the + and – symbols in the

compartment. Installing the battery pack incorrectly will

prevent the unit from operating.

4. Replace the battery compartment door.

Battery Level and Low Battery Alert

This unit has a battery level meter on the display to indicate

the status of the batteries. When the battery in the unit is

low, the battery level meter icon will flash.

Recharge the NiMH rechargeable batteries immediately.

Charging the Radio

If you use the rechargeable NiMH battery, two TLKR T8

radios can be charged directly or by using the supplied

charging cradle.

Make sure the radio is turned OFF before placing the

radio in the charging cradle. Otherwise the battery level

meter icon will not indicate properly.

Direct Charge

1. Connect the DC adapter’s plug to the radio’s DC IN 9V

jack and plug the other end to a vehicle's accessory

power outlet.

2. Charge the battery pack for 16 hours.

Using the Charging Cradle

1. Connect the AC adapter to DC IN 9V and to a standard

electrical outlet.

2. Set the charging cradle on the desk or tabletop, and

place the radio in the charging cradle with the keypad

facing forward.

3. Make sure that the LED illuminates. Charge the battery

pack for 16 hours and remove the radio from the

charging cradle after charge.

Note:The charge indicator LEDs will remain on as long

as the radios are left in the charger.

6

English

Charging the battery

You can charge the NiMH battery pack itself using the

included battery support bracket.

1. Place the battery support bracket into the charging

cradle.

2. Install the NiMH battery pack applying its charging

contacts to those of the charging cradle. Installing the

batteries incorrectly will prevent the unit from charging.

3. Make sure that the LED illuminates. Charge the battery

pack for 16 hours.

Note:The charge indicator LEDs will remain on as long

as the battery is left in the charger.

Using the Radio

In order to get the most out of your new radio, read this

reference guide completely before attempting to operate

the unit.

Turning the Radio On and Adjusting the Volume

1. Turn the rotary knob clockwise to turn the radio ON, and

increase the volume by turning the rotary knob.

To decrease the volume, turn the rotary knob counter

clockwise.

2. Turn the rotary knob fully counterclockwise to turn the

radio OFF.

Talking on Your Radio

To talk to others using the radio:

1. Press and hold the PTT key and speak in a clear, normal

voice about 5-8 cm away from the microphone. While

you are transmitting, the icon will appear on the

display. To avoid cutting off the first part of your

transmission, pause slightly after pressing the PTT

button before you start talking.

2. When you have finished speaking, release the PTT key.

You can now receive incoming calls. While receiving, the

icon will appear on the display.

Note:When you continue to transmit for 60 seconds,

the radio emits TX Time Out tone and the icon

flashes. The radio will stop transmitting.

Navigating through the Menu

To access the advanced features of the TLKR T8, your

radio has two Menu functions.

1. To enter the Menu, press the MENU/GRP key.

2. Additional presses of the MENU/GRP key will advance

you through the Menu until exiting to "Normal" operating

mode.

7

English

Select Menu

Your radio navigates through Select Menu as follows:

Choosing a Channel

Your radio has 8 channels and 121 Sub-codes you can use

to talk to others. In order to speak to someone, each of you

must set to the same channel and Sub-code.

To choose a channel:

1. Enter the CH/ Channel "CH" display.

2. Press OK to go to channel settings.

3. Press the or key to increase or decrease the

channel number displayed. If you press and hold the

or key, the channel number increase or decrease

continuously.

4. Press OK to confirm the setting.

Choosing a Sub-code

Allocating a Sub-code to your radio will help to reduce

interference but remember that the radios that have

different Sub-codes set will not be able to communicate

with each other. Each of the channels 1-8 may have any

one of the codes from 0 to 121.

1. Enter the CH/ . Advance through the Select Menu

until the "CODE" display.

2. Press OK to go to sub-code settings.

3. Press the or key to increase or decrease the Sub-

code number displayed. If you press and hold the or

key the channel number increase or decrease

continuously.

4. Press OK to confirm the setting.

CH/

Channel

Stopwatch

CH

(Channel number)

CODE

(Code number)

2 CH

(Dual watch)

dual watch

on

Channel

number (1-8)

Sub-code

number (0-121)

On/Off

8

English

Dual Watch Mode

Your radio can scan the current channel and another

channel alternately. You need to set a channel number and

its Sub-code for another channel.

To set another channel and start Dual Watch:

1. Enter the CH/ . Advance through the select menu until

"2CH" display.

2. Press OK then press the or key to set the dual

channel to ON monitoring. Press OK again to set the

dual watch channel number.

3. Press the key to set the second channel number,

press OK then press the or key to select second

channel. Press OK again to confirm.

4. Press the key to set the second sub-code, Press OK

then press the or key to select second sub-code

number. Press OK again to confirm.

Note: If you set the same channel number and Sub-code

as the current channel, Dual Watch doesn’t work.

To turn the Dual Watch mode OFF:

Enter the CH/ . Advance through the select Menu until

"2CH" display. Press OK then press the or key to set

to OFF mode.

Press OK to confirm the setting.

Stopwatch Activation

You can use this radio as a Stopwatch timer. It can time up

to 60 minutes and 59 seconds.

Note: You can receive incoming signals during this mode.

To use the Stopwatch Timer

1. Press and hold the CH/ key until Stopwatch timer

displays.

2. Press the key to start Stopwatch timer.

Pressing the key again will Pause the timer.

3. Press the key to reset the Stopwatch timer.

4. Press and hold the CH/ key to exit the Stopwatch

timer function.

9

English

Mode Menu

Your radio navigates through Select Menu as

follows:

Clock Feature

You can use your TLKR T8 radio’s clock function as a time

display on your radio. When you set the time feature, the

time clock in 24 hour format will display on standby mode.

To set the Time clock ON or OFF:

1. Enter the MENU/GRP. Advance through the Menu until

the "CLOCK" display. Press OK to set the time clock

feature.

2. Press the or key to set the hour time.

3. Press OK and move on to minutes setting.

4. Press the or key to set the minute time.

5. Press OK to confirm the time setting.

Normal

CLCK

(Clock)

SCAN

MON

(Monitor)

VOX

RING

Hour

Min

On/Off On/Off

On/Off

VIBE

(Vibration)

SLNT

(Silent)

KEYS

(Key Tone)

PTT

PWR

(Power)

10

English

Channel Scan Feature

Your TLKR T8 radio has a channel scan feature that allows

you to easily scan all 8 channels. When an active channel

is detected, the radio will pause on that channel until the

channel is clear. Then after a 2 second pause, the radio will

continue scanning. Pressing the PTT key while the scan is

paused on a channel will allow you to transmit on that

channel and after releasing the PTT in 5 seconds it will

continue scanning.

To set the channel scan ON:

1. Enter the MENU/GRP. Advance through the Menu until

"SCAN" display. Press OK then press the or key to

set the Scan On.

2. Press OK to start channel scanning.

To set the channel Scan OFF:

1. Enter the MENU/GRP. Advance through the Menu until

"SCAN" display. Press OK then press the or key to

set the Scan to OFF.

2. Press OK to confirm the setting.

Monitor Mode Feature

Your TLKR T8 radio allows you to listen for weak

signals on the current channel at the press of a key.

To set the Monitor to ON:

1. Enter the MENU/GRP. Advance through the Menu until

the "MON" display. Press OK then press the or

key to set the Monitor ON.

2. Channel monitoring will start immediately.

To set the Monitor to OFF:

1. Enter the MENU/GRP. Advance through the Menu until

"MON" display. Press OK then press the or key to

set the monitoring to OFF mode.

2. Press OK to confirm the setting.

Voice Operated Transmission

Your TLKR T8 radio is equipped with a user selectable

Voice Operated Transmitter (VOX) that can be used for

automatic voice transmission. The VOX feature is designed

for hands-free purpose. Transmission is initiated by

speaking into the microphone of the radio or headset

(headset is not included) instead of pushing the PTT key.

To select the VOX level:

1. Enter the MENU/GRP. Advance through the Menu until

the "VOX" display. Press OK to select VOX level settings

to (L1..L5/Off). Setting Off disables VOX, while level 1-5

set the sensitivity of the VOX circuit.

2. Press the or key to select the desired VOX

sensitivity level. Use Level 1 in quiet environments, and

use level 5 in very noisy environments. You can find the

appropriate sensitivity level by speaking into the

microphone. If the icon flashes, your voice is

accepted.

3. Press OK to confirm the setting.

Note:When you continue to transmit using VOX

function for 60 seconds, the radio emits TX Time

Out tone and the icon flashes for 5 seconds.

Transmitting a Ring Tone

Your TLKR T8 radio is equipped with 10 selectable call

tones that will be transmitted, when the / key is

pressed.

11

English

To select a Call tone:

1. Enter the MENU/GRP. Advance through the Menu until

the “RING” display. Press OK to select the ring tone from

(1-10).

2. Press the or key to select the desired ring tones.

Each tone will be heard every time you press the

selected ring tone number.

3. Press OK to confirm the setting.

To transmit the selected ring tone, press the / key. The

selected tone will automatically be transmitted for a fixed

length of time. Ring tone will be cancelled when the PTT

key is pressed.

Vibe (Vibration) mode

Your TLKR T8 is equipped with a Vibration selection that

will alert the user when there is incoming transmission or

call tone.

Vibrator mode is disabled for 30 seconds when you

transmit, receive or press any other button.

To turn the Vibrator mode ON:

1. Enter the MENU/GRP. Advance through the Menu until

the "VIBE" display. Press OK then press the or key

to set the Vibration to ON mode.

2. Press OK to confirm the setting.

To turn the Vibrator mode OFF:

1. Enter the MENU/GRP. Advance through the Menu until

"VIBE" display. Press OK then press the or key to

set the Vibration OFF.

2. Press OK to confirm the setting.

Slnt (Silent) Mode

When you turn On the silent mode, all incoming calls are

muted; the radio blinks the backlight to alert you to an

incoming call. If you do not respond to the call, the backlight

turns Off, and the CALL icon will blink until there is no

signal.

Silent mode is disabled for 30 seconds when you transmit,

receive, or press any other button.

To turn the Silent ON:

1. Enter the MENU/GRP. Advance through the Menu until

the "SLNT" display. Press OK then press the or

key to set the Silent to ON mode.

2. Press OK to confirm the setting.

To turn the Silent OFF:

1. Enter the MENU/GRP. Advance through the Menu until

"SLNT" display. Press OK then press the or key to

set the Silent to OFF.

2. Press OK to confirm the setting.

Key Tone

Your radio emits a tone each time one of the keys (except

for the PTT key) is pressed.

To turn the Key tone ON:

1. Enter the MENU/GRP. Advance through the Menu until

the "KEYS" display. Press OK then press the or

key to set the Key Beep tone ON mode.

2. Press OK to confirm the setting.

To turn the Key tone OFF:

1. Enter the MENU/GRP. Advance through the Menu until

"KEYS" display. Press OK then press the or key to

12

English

set the Key tone to OFF.

2. Press OK to confirm the setting.

PTT (Roger tone)

Roger Beep is a BEEP that is sent to notify the end of

transmission (PTT and VOX transmission). Roger can be

heard through the speaker when Key Beep is On. It is

transmitted even if Key beep is turned Off. However, Roger

Beep will not be heard from the speaker.

To turn the PTT beep ON:

1. Enter the MENU/GRP. Advance through the Menu until

the "PTT" display. Press OK then press the or key

to set the PTT Beep tone to ON mode.

2. Press OK to confirm the setting.

To turn the PTT beep OFF:

1. Enter the MENU/GRP. Advance through the Menu until

"PTT" display. Press OK then press the or key to

set the PTT tone to OFF.

2. Press OK to confirm the setting.

Automatic Power Save Feature

Your radio has a unique circuit designed to dramatically

extended the life of the batteries. If there is no transmission

or an incoming call within 3 seconds, your radio switches to

the Power Save Mode. The radio is still able to receive

transmissions in this mode.

Auto Power Off

Auto Power Off feature allows you to set the time that the

radio turns off automatically.

1. Enter the MENU/GRP. Advance through the Menu until

the"PWR"display. Press OK then press the or key

to select the Auto power off mode. Selection mode can

be set to On, 1hr, 2hr or 3 hr.

2. Press OK to confirm the setting.

Room Monitor Feature

You can use one of your TLKR T8 radios as a room monitor

and use the other radio to listen to and keep a check on the

voice in another room. When you set the room monitor

feature, the monitoring radio will detect voice/noises

(according to the sensitivity level you set) and transmit back

to the listening radio without pushing the PTT key. The

monitoring radio is not able to receive any transmissions in

this mode.

To turn the Room Monitor ON:

1. Enter the MENU/GRP. Advance through the Menu until

the "ROOM" display. Press OK then press the or

key to select the Room monitor to Off or level L1, L2, L3,

L4, L5.

2. Channel monitoring will start immediately.

To set the Room Monitor OFF:

1. Enter the MENU/GRP. Advance through the Menu until

the "ROOM" display. Press OK then press the or

key to set the Room monitor to Off.

2. Press OK to confirm the setting.

Note:

- Pressing the PTT key in Room Monitor mode is invalid and

the radio emits PTT Error tone.

- When the voice/noise in another room continues more

than 60 seconds, the monitoring radio stops monitoring for

5 seconds, and then resumes.

13

English

Group Menu

Press and hold the MENU/GRP key to get into Group

Menu.

Clock Feature in Group Mode

You can use your TLKR T8 radio’s clock function as a time

display on your radio. When you set the time feature, the

time clock in 24 hour format will display on standby mode.

To set the Time clock ON:

1. Enter the MENU/GRP. Advance through the Menu until

the "CLCK" display. Press OK to set the Time clock

feature.

2. Press the or key to set the hour time.

3. Press OK to move on to minute setting.

4. Press the or key to set the minute time.

5. Press OK to confirm the time setting.

14

English

Set ID Name

ID name appears on other units’ displays when you make

an All Call or Direct Call. This is also the name that appears

on other radio displays when someone wants to make a

Direct Call to you. When no ID name is set, the unit number

appears.

To set the ID Name:

1. Enter the MENU/GRP. Advance through the Menu until

"NAME" is displayed. Press OK to enter the Name on the

blinking sub-code segments.

2. Press the or key to input the character on the

blinking sub code segments. Press OK to move to the

next character until completed the desired characters.

The name characters can be selected up to 4 characters.

3. Press OK to confirm the setting.

Note:Whenever the user presses MENU/GRP key, the

unit cancels input ID number and entered ID

name then it exits from Group menu.

Set ID number

Each radio in your group needs to be set to an ID number

from 1 to 16.

The ID number is required to distinguish units of the same

Group.

To set the ID number:

1. Enter the MENU/GRP. Advance through the Menu until

"ID" is displayed. Press OK then press the or key

to set the ID number.

2. Press OK to confirm the setting.

Note:The user selects ID number that is displayed on

channel segments by pressing the or key.

When the registered ID of All Call is selected by

pressing or the LCD indicates "USED" at

sub-code segments, and if non registered ID is

selected it indicates nothing at sub-code

segments.

Set Monitor in Group mode

To set the Monitor mode ON:

1. Enter the MENU/GRP. Advance through the Menu until

the "MON" display. Press OK then press the or

key to set the Monitor to ON mode.

2. Channel monitoring will start immediately.

To set the Monitor to OFF:

1. Enter the MENU/GRP. Advance through the Menu until

"MON" display. Press OK then press the or key to

set the Monitor to OFF.

2. Press OK to confirm the setting.

15

English

Set Ring Tone in Group mode

To select a Ring tone:

1. Enter the MENU/GRP. Advance through the Menu until

"RING" displays. Press OK to select the ring tone from

(1-10).

2. Press the or key to select the desired ring tone.

Each tone will be heard every time you press the

selected ring tone number.

To transmit the selected ring tone, press the corresponding

key. The selected tone will automatically be transmitted for

a fixed length of time. Ring tone will be cancelled when the

PTT key is pressed.

Set Key Tone in Group mode

To set the Key tone ON:

1. Enter the MENU/GRP. Advance through the Menu until

the "KEYS" display. Press OK then press the or

key to set the Key Beep tone to ON.

2. Press OK to confirm the setting.

To set the Key tone OFF:

1. Enter the MENU/GRP. Advance through the Menu until

"KEYS" display. Press OK then press the or key to

set the Key tone to OFF.

2. Press OK to confirm the setting.

Set PTT in Group mode

To set the PTT beep ON:

1. Enter the MENU/GRP. Advance through the Menu until

the "PTT" display. Press OK then press the or key

to select the PTT Beep tone to ON mode.

2. Press OK to confirm the setting.

To set the PTT beep OFF:

1. Enter the MENU/GRP. Advance through the Menu until

"PTT" display. Press OK then press the or key to

set the PTT tone to OFF.

2. Press OK to confirm the setting.

Set Auto power off in Group mode

Auto Power Off feature allows you to set the time that the

radio turns off automatically.

1. Enter the MENU/GRP. Advance through the Menu until

the "PWR" display. Press OK then press the or

key to select the Auto power off mode. Selection mode

can be set to On, 1hr, 2hr or 3 hr.

2. Press OK to confirm the setting.

Group Mode

Press the CH/ key to get into Group Mode.

Press the or key to proceed to each menu.

16

English

Press the CH/ key to enter the channel setting. Press

OK then press the or key to select the Auto Channel

Change settings or Manual Channel Change settings.

The Display shows the following:

Press the CH/ key to enter each setting.

Note:Pressing the CH/ key will go back to idle

status.

Auto Channel Change setting

Press the CH/ key to enter Group Mode.

Press OK to set the Auto Channel change and the display

will show the current group number. Press OK then press

the or key to select the group channel number press

again the or key to select the group mode in "ALL".

Press OK to confirm and transmit Auto Channel change

command.

Note:Pressing CH/ key will go back to idle status.

Manual Channel setting

Press the CH/ key to enter Group Mode. Press OK to

set the Manual Channel setting and the display will show

"MY".

Press OK then press the or key to select the

channel.

Then, Manual channel setting is available.

Note:Pressing the CH/ key will go back to idle

status.

Set All/Direct Call

Press the / key in Group mode to enter All/Direct call

setting. At first the user selects a type of call from All Call

transmission or Direct Call setting.

To select the setting, press the or key to select the

type of a call.

Set All Call

When All Call Transmission " ZYNC" is selected press the

/ key to transmit All Call immediately. Then it sounds

All Call tone to the receiver unit. The display shows TX icon

and Call icon while transmitting.

Note:Pressing the CH/ key will go back to idle status.

Auto Channel

Change

Manual Channel

Change

All Call

Transmission

Direct Call

Transmission

17

English

Set Direct Call

The display shows ID number on Channel segments and ID

name blinks on sub-code segments.

Press the or key to select the ID number. Press OK

to transmit Direct Call command. The Direct Call command

will only transmit to the selected ID number.

The display shows the TX icon and Call icon while

transmitting.

The unit sounds will transmit the selected Call tone when

transmitting Direct Call command.

Note:Pressing the CH/ key will go back to All/Direct

Call setting.

Key Lock Activation

To Lock the keypad:

Press and hold the / key. The icon appears.

In sub-code segments shows "LOCK" for 2 seconds then it

returns to previous screen.

To Unlock the keypad:

Press and hold the / key again. The icon

disappears. In sub-code segments shows "UNLK" for 2

seconds then it returns to previous screen.

Note:If any key (except PTT) is pressed while LOCK

icon still displayed every press of keys will

sound with error tone.

Battery Low Alert

Battery Low alerts when the battery level becomes empty.

The alert starts 30 seconds after the Battery Low icon starts

blinking. The sub-code segment indicates "BATT" and the

Battery Low icon blinks.The alert tone sounds every

5 seconds for 30 seconds then the radio will automatically

power off.

LCD Backlight

The LCD backlight will automatically turn ON when any key

(except for PTT) is pressed. The LCD display will illuminate

for 10 seconds after the last key pressed.

ID number for Direct Call

ID name

18

English

Specifications Frequency Chart (MHz)

Approved Accessories List

Please contact your dealer or retailer to purchase these

accessories.

Channels 8 PMR

Sub-Codes 121 (38 CTCSS and

83 DCS Codes)

Operating

Frequency

446.00625 - 446.09375 MHz

Power Source AAA Ni-MH battery Pack

4 AAA Alkaline Batteries

(not included)

Range Up to 10 km

Battery Life 16 Hours typical

Alkaline Batteries

14 Hours typical

NiMH Battery pack

Ch. Freq.

1 446.00625

2 446.01875

3 446.03125

4 446.04375

5 446.05625

6 446.06875

7 446.08125

8 446.09375

La pagina sta caricando ...

Motorola TLKR T8 Manuale del proprietario

Motorola TLKR T8 Manuale del proprietario

in altre lingue

Documenti correlati

Altri documenti