Datalogic Dragon D131 Quick Reference Manual

Marca: Datalogic

Modello: Dragon D131

Categoria: Lettori di codici a barre

Tipo: Quick Reference Manual

Datalogic Scanning, Inc.

959 Terry Street

Eugene, Oregon 97402

Telephone: (541) 683-5700

Fax: (541) 345-7140

procedures described therein may be reproduced or transmitted in any form or by any means without

prior written per-mission of Datalogic Scanning, Inc. or its subsidiaries or affiliates ("Datalogic" o

“Datalogic Scanning”). Owners of Datalogic products are hereby granted a non-exclusive, revocable

license to reproduce and transmit this documentation for the purchaser's own internal business purposes.

Purchaser shall not remove or alter any proprietary notices, including copyright notices, contained in this

documentation and shall ensure that all notices appear on any reproductions of the documentation.

Should future revisions of this manual be published, you can acquire printed versions by contacting you

Datalogic representative. Electronic versions may either be downloadable from the Datalogic website

(www.scanning.datalogic.com) or provided on appropriate media. If you visit our website and would like to

make comments or suggestions about this or other Datalogic publications, please let us know via the

"Contact Datalogic" page.

DISCLAIMER

Datalogic has taken reasonable measures to provide information in this manual that is complete and

accurate, however, Datalogic reserves the right to change any specification at any time without prio

notice. Datalogic is a registered trademark of Datalogic S.p.A. in many countries and the Datalogic logo is

a trademark of Datalogic S.p.A. all licensed to Datalogic Scanning, Inc. All other trademarks and trade

names referred to herein are property of their respective owners.

SERVICES AND SUPPORT

Datalogic provides several services as well as technical support through its website. Log on to

www.scanning.datalogic.com and click on the

links indicated for further information including:

• PRODUCTS

Search through the links to arrive at your product page where you can download specific

Manuals

and Software & Utilities including:

- Datalogic Aladdin™ a multi-platform utility program, which allows device configuration using

a PC. It provides RS232/USB-COM interface configuration as well as configuration barcode

printing.

• SERVICES & SUPPORT

Datalogic Services - Warranty Extensions and Maintenance Agreements

Authorised Repair Centres

• CONTACT US

E-mail form and listing of Datalogic Subsidiaries

WARRANTY

Datalogic warranties this product against defects in workmanship and materials, for a period of 3 years

from the date of shipment, provided that the product is operated under normal and proper conditions.

Datalogic has the faculty to repair or replace the product; these provisions do not prolong the original

warranty term.

The warranty does not apply to any product that has been subject to misuse, accidental damage,

unauthorized repair or tampering.

Datalogic Scanning, Inc.

959 Terry Street

Eugene, OR 97402

dichiara che

declares that the

déclare que le

bescheinigt, daß das Gerät

declare que el

DRAGON Dxxx

e tutti i suoi modelli

and all its models

et tous ses modèles

und seine Modelle

y todos sus modelos

sono conformi alle Direttive del Consiglio Europeo sottoelencate:

are in conformity with the requirements of the European Council Directives listed below:

sont conformes aux spécifications des Directives de l'Union Européenne ci-dessous:

den nachstehenden angeführten Direktiven des Europäischen Rats:

cumple con los requisitos de las Directivas del Consejo Europeo, según la lista siguiente:

89/336/EEC EMC Directive

92/31/EEC, 93/68/EEC

emendamenti successivi

and

further amendments

ses successifs amendements

und

späteren Abänderungen

succesivas enmiendas

Basate sulle legislazioni degli Stati membri in relazione alla compatibilità elettromagnetica ed alla sicurezza dei

prodotti.

On the approximation of the laws of Member States relating to electromagnetic compatibility and product safety.

Basée sur la législation des Etats membres relative à la compatibilité électromagnétique et à la sécurité des

produits.

Über die Annäherung der Gesetze der Mitgliedsstaaten in bezug auf elektromagnetische Verträglichkeit und

Produktsicherheit entsprechen.

Basado en la aproximación de las leyes de los Países Miembros respecto a la compatibilidad electromagnética y

las Medidas de seguridad relativas al producto.

Questa dichiarazione è basata sulla conformità dei prodotti alle norme seguenti:

This declaration is based upon compliance of the products to the following standards:

Cette déclaration repose sur la conformité des produits aux normes suivantes:

Diese Erklärung basiert darauf, daß das Produkt den folgenden Normen entspricht:

Esta declaración se basa en el cumplimiento de los productos con las siguientes normas:

EN 55022 (C

LASS A ITE), August 1994:

MENDMENT A1 (CLASS A ITE), October 2000:

IMITS AND METHODS OF MEASUREMENTS OF RADIO

DISTURBANCE CHARACTERISTICS OF INFORMATION

TECHNOLOGY EQUIPMENT

EN 61000-6-2, October 2001:

LECTROMAGNETIC COMPATIBILITY (EMC).

PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL

ENVIRONMENTS

March 1st, 2007

Dragon™ D131

READERS

QUICK REFERENCE GUIDE

820001772eng (Rev. B) 9/07

UPDATES AND LANGUAGE AVAILABILITY

UK/US

The latest drivers and documentation updates for this product are available on

Internet.

Log on to: www.scanning.datalogic.com

Su Internet sono disponibili le versioni aggiornate di driver e documentazione di

questo prodotto. Questo manuale è disponibile anche nella versione italiana.

Collegarsi a: www.scanning.datalogic.com

Les versions mises à jour de drivers et documentation de ce produit sont

disponibles sur Internet. Ce manuel est aussi disponible en version française.

Cliquez sur : www.scanning.datalogic.com

Im Internet finden Sie die aktuellsten Versionen der Treiber und Dokumentation für

dieses Produkt. Die deutschsprachige Version dieses Handbuches ist auch

verfügbar.

Adresse : www.scanning.datalogic.com

En Internet están disponibles las versiones actualizadas de los drivers y

documentación de este producto. También está disponible la versión en español

de este manual.

Dirección Internet : www.scanning.datalogic.com

CONNECTIONS

CONNECTING THE CABLE

A. Rubber boot

B. Rubber boot clip

C. Cover

D. Strain relief

E. Screw

c Slip the cover over the

cable.

d Push the rubber boot

completely over the

connector. Take care that

the rubber boot mark is

aligned to the connector

clip.

e Pull the rubber boot

towards the connector until

it covers and is flush with

the connector moulding.

f Lock the rubber boot clip

around the rubber boot

aligning them as shown in

the figure.

g Insert the assembly

(connector + rubber boot

locked through clip) into

the reader connector.

Push the cover along the

cable towards the reader

handle and make it hook

over the yellow tooth

therefore closing the

handle.

h Insert the strain relief into

the cover.

i Insert the screw into the

strain relief and tighten to

fix the whole assembly to

the reader handle.

COMPLIANCE

LASER SAFETY COMPLIANCE

The laser scanner conforms to the applicable requirements of both CDRH 21 CFR 1040 and

EN60825-1 at the date of manufacture.

The laser light is visible to the human eye and is emitted

from the output window c.

Laser warning and classification label d.

CAUTION:

Use of controls or adjustments or performance o

procedures other than those specified herein may result in

exposure to hazardous visible laser light.

The laser scanner utilizes a low-power laser diode. Although staring directly at the laser beam

momentarily causes no known biological damage, avoid staring at the beam as one would with

any very strong light source, such as the sun. Avoid that the laser beam hits the eye of an

observer, even through reflective surfaces such as mirrors, etc.

The following information is shown on the laser scanner device class label:

LASER LIGHT - DO NOT STARE INTO BEAM

CLASS 2 LASER PRODUCT

MAX. OUTPUT RADIATION 1.4 mW

EMITTED WAVELENGTH 630~680 nm

EN60825-1: 2001

CAUTION - CLASS 2 LASER

LIGHT WHEN OPEN

AVOID EXPOSURE – LASER LIGHT

IS EMITTED FROM THIS APERTURE

DO NOT STARE INTO BEAM

This product complies with

21 CFR Subchapter J

ITALIANO LUCE LASER

NON FISSARE IL RAGGIO

APPARECCHIO LASER DI CLASSE 2

FRANÇAIS RAYON LASER

EVITER DE REGARDER LE RAYON

APPAREIL LASER DE CLASSE 2

DEUTSCH LASERSTRAHLUNG

NICHT IN DEN STRAHL BLICKEN

PRODUKT DER LASERKLASSE 2

ESPAÑOL RAYO LÁSER

NO MIRAR FIJO EL RAYO

APARATO LÁSERDE CLASE 2

LED CLASS

Class 1 LED product.

This product conforms to EN60825-1:2001.

USB

WEDGE

RS232

PEN

CE COMPLIANCE

Warning:

This is a Class A product. In a domestic environment this product may cause radio interference

in which case the user may be required to take adequate measures.

FCC COMPLIANCE

Modifications or changes to this equipment without the expressed written approval of Datalogic

could void the authority to use the equipment.

This device complies with PART 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must accep

any interference received, including interference which may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, i

not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference in which case the user will be required to correct the interference

at his own expense.

POWER SUPPLY

This device is intended to be connected to a UL Listed/CSA Certified computer which supplies

power directly to the reader or else be supplied by a UL Listed/CSA Certified Power Unit marked

“Class 2” or LPS power source rated 4 - 30 V, minimum 420 mA, which supplies power directly to

the reader via the power connector of the cable.

WEEE COMPLIANCE

PATENTS

This product is covered by one or more of the following patents:

U.S. patents 5,992,740; 6,305,606 B1; 6,442,180 B1; 6,808,114 B1; and 6,997,385 B2

European patents 789,315 B1; 895,175 B1; and 1,128,315 B1

Additional Patents and Design Patents pending.

Align

DEFAULT VALUES

USB-KBD DEFAULT SETTINGS

USA keyboard, FIFO enabled, inter-character and inter-code delays disabled,

USB keyboard speed normal.

DATA FORMAT: code identifier disabled, no field adjustment, code length not

transmitted, no header, terminator = ENTER, character replacement disabled.

RS232 Standard DEFAULT SETTINGS

9600 baud, no parity, 8 data bits, 1 stop bit, no handshaking, delay disabled, rx

timeout 5 sec., ack/nack disabled, FIFO enabled, inter-character delay disabled,

serial trigger lock disabled.

DATA FORMAT: code identifier disabled, no field adjustment, code length not

transmitted, no header, terminator = CR-LF, character replacement disabled.

WEDGE DEFAULT SETTINGS

USA keyboard, caps lock off, caps lock auto-recognition enabled, num lock

unchanged, inter-character and inter-code delays disabled, control character

emulation = ctrl+shift+key.

DATA FORMAT: code identifier disabled, no field adjustment, code length not

transmitted, no header, terminator = ENTER, character replacement disable.

PEN DEFAULT SETTINGS

interpret operating mode, conversion to code 39 disabled, output level normal,

idle level normal, minimum output pulse 600 µs, overflow medium, inter-block

delay disabled.

CODE SELECTION

Enabled codes

• EAN 8/EAN 13 / UPC A/UPC E without ADD ON

check digit transmitted, no conversions

• Interleaved 2/5

check digit control and transmission, variable length code; 4-99 characters

• Standard Code 39

no check digit control, variable length code; 1-99 characters

• Code 128

variable length code; 1-99 characters

Disabled codes

EAN 128, ISBT128, Code 93, Codabar, pharmaceutical codes, MSI,

Code 11, Code 16K, Code 49, RSS Codes

TECHNICAL FEATURES

Dragon™ D131/D131 LR

Electrical Features

Power Supply 4 to 30 Vdc

Max. Consumption:

@ 4V

@ 5V

@ 30V

Sleep mode

420 mA

310 mA

62 mA

4 mA

Scan Rate 35 ± 5 scans/sec

Reading Indicators

Good Read LED (green)

Good Read Spot (green), Beeper

Optical Features Dragon™ D131 Dragon™ D131 LR

Reading Field

110 cm (43.3 in)

@ 55 mils

225 cm (88.6 in)

@ 55 mils

Max. Resolution 0.076 mm (3 mils) 0.25 mm (10 mils)

PCS (Datalogic Test Chart) 15% 40%

Laser Features

Power (max) 0.9 mW 1.4 mW

Scan Angle 42° 23°

Laser Safety Class Class 2 EN 60825-1/CDRH

Environmental Features

Working Temperature

-30 °C to + 50 °C / -22° to +122 °F

Storage Temperature

-30 °C to + 70 °C / -22° to +158 °F

Humidity 90% non condensing

Drop Resistance IEC 68-2-32 Test ED 2 m

Protection Class IP64

Mechanical Features

Weight (without cable) about 295 g (10.4 oz)

Cable Length 2 m (6 ft 6 in)

RESTORE DEFAULT

Ì$+$*oÎ

To change the defaults refer to the Dragon™ D131/M131 Reference Manual, part

number 90ACC1929, or to the Datalogic Aladdin™ Configuration program, both

downloadable from the website.

INTERFACE SELECTION

Select one of the interface codes according to your application.

USB INTERFACE SELECTION

USB-KBD

Ì$+UA03$-:Î

USB-KBD-ALT-MODE

Ì$+UA04$-@Î

USB-COM*

Ì$+UA02$-4Î

USB-IBM-Hand Held

Ì$+UA01$-.Î

* When configuring USB-COM, the relevant files and drivers must be installed

from the USB Device Installation software, which can be downloaded from the

web site http://www.scanning.datalogic.com.

PEN EMULATION INTERFACE SELECTION

PEN

Ì$+CP6$-BÎ

RS232 INTERFACE SELECTION

RS232 Standard

Ì$+CP0$-$Î

Nixdorf Mode A

Ì$+CM2EC0$->Î

Fujitsu

Ì$+CM1$-ÈÎ

ICL Mode

Ì$+CM0$-ÃÎ

WEDGE INTERFACE SELECTION

Wedge IBM AT or PS/2 PCs

Ì$+CP500$-aÎ

PC Notebook

Ì$+CP505$-ÈÎ

PC Notebook - ALT mode

Ì$+CP508$-2Î

IBM AT - ALT mode

Ì$+CP507$-+Î

Many other interfaces are supported and can be selected from the

Dragon™ D131/M131 Reference Manual available online at

http://www.scanning.datalogic.com. Other supported interfaces:

USB: USB-IBM-Table Top; USB-KBD-APPLE

WEDGE: IBM XT; IBM SURE1; IBM Terminal 3153; IBM Terminals 31xx, 32xx,

34xx, 37xx; Wyse Terminals ANSI – PC –ASCII – VT220 style Keyboards; Digital

Terminal VT2xx/VT3xx/VT4xx; APPLE ADB Bus

KEYBOARD NATIONALITY

USB-KBD and Wedge users should select one of the following wedge keyboard

nationality codes according to the keyboard.

Belge

Ì$+FJ7$-8Î

Deutsch

Ì$+FJ3$-$Î

English

Ì$+FJ4$-)Î

Español

Ì$+FJ6$-3Î

Français

Ì$+FJ2$-ÊÎ

Italiano

Ì$+FJ1$-ÅÎ

Svenskt

Ì$+FJ5$-.Î

USA (Default)

Ì$+FJ0$-|Î

The following Keyboard Nationality selections are only valid for IBM AT compatible

PCs:

Japanese

Ì$+FJ8$-=Î

Russian (Latin)

Ì$+FJ9$-BÎ

Russian (Cyrillic)

Ì$+FJA$-jÎ

Hungarian

Ì$+FJB$-oÎ

Slovenian, Croatian, Serbian (Latin)

Ì$+FJC$-tÎ

Romanian

Ì$+FJD$-yÎ

Czech Republic

Ì$+FJE$-~Î

USING DRAGON™ D131/D131 LR READERS

Dragon™ D131 readers automatically scan barcodes at a distance. Simply aim

and pull the trigger. Code scanning is performed along the scan line emitted from

the reading window. This line must cross the entire code. The best reading angles

are indicated in the figure below.

AIMING SYSTEM

Dragon™ D131 and Dragon™ D131 LR provides an aiming system. If enabled, a

partial trigger press produces a red spot, which should be aimed over the code

center to get the best reading performance (see figure above, c). By completely

pressing the trigger the scan line appears to start code scanning d.

After setting up the reader, you can enable or disable the aiming system by

reading the codes below:

Disable Aiming System (Default)

Ì$+Bj0$-"Î

Enable Aiming System

Ì$+Bj1$-'Î

DATA FORMAT TERMINATORS

For your convenience, some common Terminators are given below. For other

Header/Terminator selections, Data Format and Advanced Data Format

parameters, see the Dragon™ D131/M131 Reference Manual.

CR-LF

Ì$+EA120D0A$-ÃÎ

Enter

Ì$+EA1183$-0Î

Tab

Ì$+EA1184$-8Î

None

Ì$+EA10$-dÎ

OPERATING TEST

Read the TEST code below.

Code 128

test

Datalogic Dragon D131 Quick Reference Manual

Marca: Datalogic

Modello: Dragon D131

Categoria: Lettori di codici a barre

Tipo: Quick Reference Manual

Scarica il pdf

rapporto

in altre lingue

English: Datalogic Dragon D131

Documenti correlati

Altri documenti

Datalogic Scanning D101 LR Manuale utente