![](//vs1.manuzoid.it/store/data-gzf/c986f03f152d1946531248f11e9439bc/2/000117993.htmlex.zip/bg14.jpg)
Reference Manual
Basic Structure
20
Basic Structure
Functional Blocks
Tone Generator
A/D Input
Arpeggio
Sequencer
Audio Record/Play
Controller
Effect
Internal Memory
Reference
Voice
Performance
Multi
SEQ Play
Master
Remote
File
Audio Rec/Play
Utility
Appendix
About MIDI
Display Messages
Troubleshooting
Effect parameters making up the affect of the Effect Type are listed here in alphabetical order.
NOTE
Each name of the parameters listed below is indicated with its full or complete spelling, although it is
indicated with the abbreviated spelling on the LCD. The discrepancy in the name may make it difficult to find
the desired parameter. In such a case, confirm the parameters belonging to the Effect Type you want to edit
by referring to the Effect Parameter List in the Data List (separate PDF documentation).
NOTE Some parameters below may appear in different effect types with the same name, but actually have different
functions depending on the particular effect type. For these parameters, two or three types of explanations
are given. The Effect type corresponding to each explanation is described at the top of the sentences.
Effect parameters
Parameter name Descriptions
AEG Phase
Offsets the phase of the AEG.
AM Depth
Determines the depth of the amplitude modulation.
AM Inverse R
Determines the phase of the amplitude modulation for the R channel.
AM Speed
Determines the amplitude modulation speed.
AM Wave
Selects the wave for modulating the amplitude.
AMP Type
Selects the amplifier type to be simulated.
Analog Feel
Adds the characteristics of an analog flanger to the sound.
Attack
Determines the amount of time that elapses between the playing of a key and the start of the
compressor effect.
Attack Offset
Determines the amount of time that elapses between the playing of a key and the start of the wah effect.
Attack Time
Determines the attack time of the envelope follower.
Bit Assign
Determines how the Word Length is applied to the sound.
Bottom
*1
Determines the minimum value of the wah filter.
Click Density
Determines the frequency at which the click sounds.
Click Level
Determines the click level.
Color
*2
Determines the fixed phase modulation.
Common Release
This is a parameter of “Multi Band Comp.” This parameter determines the amount of time that elapses
between the releasing of a note and the end of the effect.
Compress
Determines the minimum input level at which the compressor effect is applied.
Control Type
This is a parameter of “Control Delay.” When set to “Normal,” the delay effect is always applied to the
sound. When set to “Scratch,” the delay effect is not applied if both the Delay Time and Delay Time
Offset are set to “0.”
Damper Control
When the half-damper compatible FC3 footswitch is connected to the SUSTAIN jack, the Damper
Control parameter is controlled by the FC3 over a range of 0 – 127, allowing for partial damper effects,
such as is available on an actual grand piano.
Decay
Controls how the reverb sound decays.
Delay Level C
Determines the level of the delayed sound for the center channel.
Delay Mix
Determines the level of the delayed mixed sound when multiple effects are applied.
Delay Offset
Determines the offset value of the delay modulation.
Delay Time
Determines the delay of the sound in note value or absolute time.
Delay Time C, L, R
Determines the delay time for each channel: center, left and right.
Delay Time L>R
Determines the amount of time between the moment the sound is input from the L channel and the
moment the sound is output to the R channel.
Delay Time Ofst R
Determines the delay time for the R channel as offset.
Delay Time R>L
Determines the amount of time between the moment the sound is input from the R channel and the
moment the sound is output to the L channel.
Delay Transition Rate
Determines the speed (rate) at which the delay time is changed from the current value to the specified
new value.
Density
Determines the density of the reverberations or reflections.
Depth
When “Space Simulator” is selected, this parameter determines the depth of the simulated room.
When “VCM Flanger” is selected, this parameter determines the amplitude of the LFO wave which
controls the cyclic change of the delay modulation.
When “Phaser Type” is selected, this parameter determines the amplitude of the LFO wave which
controls the cyclic change of the phase modulation.
Detune
Determines the amount of pitch to be detuned.
Device
Selects the device for changing how to distort the sound.
Diffusion
Determines the spread of the selected effect.
Direction
Determines the direction of the modulation controlled by the envelope follower.
Divide Freq High
Determines the high frequency for dividing the entire sound into three bands.
Divide Freq Low
Determines the low frequency for dividing the entire sound into three bands.
Divide Min Level
Determines the minimum level of the portions extracted via the slice effect.
Divide Type
Determines how the sound (wave) is sliced by the note length.
Drive
When one of the distortion, noisy and slice effects is selected, this parameter determines the extent to
which the sound is distorted.
When one of the misc effects is selected, this parameter determines the extent to which the enhancer is
applied.
Drive Horn
Determines the depth of the modulation generated via the rotation of the horn.