Sony MEX-N4000BT Manuale del proprietario

Marca: Sony

Modello: MEX-N4000BT

Categoria: Ricevitori multimediali per auto

Tipo: Manuale del proprietario

MEX-N4000BT

4-480-655-12(1)

Bluetooth®

Audio System

Operating Instructions

Bedienungsanleitung

Mode d’emploi

Istruzioni per l’uso

Gebruiksaanwijzing

To cancel the demonstration (DEMO) display, see page 16.

Zum Deaktivieren der Demo-Anzeige (DEMO) schlagen Sie bitte

auf Seite 17 nach.

Pour annuler la démonstration (DEMO), reportez-vous à la

page 17.

Per annullare la dimostrazione (DEMO), vedere pagina 17.

Om de demonstratie (DEMO) te annuleren, zie pagina 17.

2GB

Made in Thailand

Laser Diode Properties

 Emission Duration: Continuous

 Laser Output: Less than 53.3 W

(This output is the value measurement at a distance

of 200 mm from the objective lens surface on the

Optical Pick-up Block with 7 mm aperture.)

The nameplate indicating operating voltage, etc., is

located on the bottom of the chassis.

Hereby, Sony Corp., declares that this MEX-

N4000BT is in compliance with the essential

requirements and other relevant provisions of

Directive 1999/5/EC.

For details, please access the following URL:

http://www.compliance.sony.de/

Notice for customers: the following

information is only applicable to equipment

sold in countries applying EU Directives

Manufacturer: Sony Corporation, 1-7-1 Konan

Minato-ku Tokyo, 108-0075 Japan

For EU product compliance: Sony Deutschland

GmbH, Hedelfinger Strasse 61, 70327 Stuttgart,

Germany

Be sure to install this unit in the dashboard of the

car for safety.

For installation and connections, see the

supplied installation/connections manual.

Warning if your car’s ignition has no ACC

position

Be sure to set the AUTO OFF function (page 16).

The unit will shut off completely and

automatically in the set time after the unit is

turned off, which prevents battery drain. If you

do not set the AUTO OFF function, press and hold

OFF until the display disappears each time you

turn the ignition off.

3GB

Caution

IN NO EVENT SHALL SONY BE LIABLE FOR ANY

INCIDENTAL, INDIRECT OR CONSEQUENTIAL

DAMAGES OR OTHER DAMAGES INCLUDING,

WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF

REVENUE, LOSS OF DATA, LOSS OF USE OF THE

PRODUCT OR ANY ASSOCIATED EQUIPMENT,

DOWNTIME, AND PURCHASER’S TIME RELATED TO

OR ARISING OUT OF THE USE OF THIS PRODUCT, ITS

HARDWARE AND/OR ITS SOFTWARE.

IMPORTANT NOTICE!

Safe and efficient use

Changes or modifications to this unit not expressly

approved by Sony may void the user’s authority to

operate the equipment.

Please check for exceptions, due to national

requirement or limitations, in usage of BLUETOOTH

equipment before using this product.

Driving

Check the laws and regulations on the use of

cellular phones and handsfree equipment in the

areas where you drive.

Always give full attention to driving and pull off the

road and park before making or answering a call if

driving conditions so require.

Connecting to other devices

When connecting to any other device, please read

its user guide for detailed safety instructions.

Radio frequency exposure

RF signals may affect improperly installed or

inadequately shielded electronic systems in cars,

such as electronic fuel injection systems, electronic

antiskid (antilock) braking systems, electronic

speed control systems or air bag systems. For

installation or service of this device, please consult

with the manufacturer or its representative of your

car. Faulty installation or service may be dangerous

and may invalidate any warranty that may apply to

this device.

Consult with the manufacturer of your car to ensure

that the use of your cellular phone in the car will not

affect its electronic system.

Check regularly that all wireless device equipment

in your car is mounted and operating properly.

Emergency calls

This BLUETOOTH car handsfree and the electronic

device connected to the handsfree operate using

radio signals, cellular, and landline networks as well

as user-programmed function, which cannot

guarantee connection under all conditions.

Therefore do not rely solely upon any electronic

device for essential communications (such as

medical emergencies).

Remember, in order to make or receive calls, the

handsfree and the electronic device connected to

the handsfree must be switched on in a service area

with adequate cellular signal strength.

Emergency calls may not be possible on all cellular

phone networks or when certain network services

and/or phone features are in use.

Check with your local service provider.

Notes on BLUETOOTH function

4GB

Table of Contents

Guide to Parts and Controls . . . . . . . . . . . . . . . . . . . 5

Getting Started

Detaching the Front Panel . . . . . . . . . . . . . . . . . . . . 6

Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Preparing a BLUETOOTH Device. . . . . . . . . . . . . . . . 7

Connecting an iPod/USB Device . . . . . . . . . . . . . . . 8

Connecting Other Portable Audio Device . . . . . . . . 9

Listening to the Radio

Listening to the Radio. . . . . . . . . . . . . . . . . . . . . . . . 9

Using Radio Data System (RDS) . . . . . . . . . . . . . . . 10

Playback

Playing a Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Playing an iPod/USB Device. . . . . . . . . . . . . . . . . . 11

Playing a BLUETOOTH Device. . . . . . . . . . . . . . . . . 11

Searching and Playing Tracks. . . . . . . . . . . . . . . . . 12

Handsfree Calling

Receiving a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Making a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Available Operations during Call . . . . . . . . . . . . . . 14

Useful Functions

App Remote with iPhone/Android Phone . . . . . . 14

Settings

Canceling the DEMO Mode . . . . . . . . . . . . . . . . . . 16

Basic Setting Operation . . . . . . . . . . . . . . . . . . . . . 16

GENERAL Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

SOUND Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

EQ10 PRESET . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

EQ10 SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . 16

POSITION (listening position). . . . . . . . . . . . . . 17

RB ENH (rear bass enhancer) . . . . . . . . . . . . . . 17

SW DIREC (subwoofer direct connection) . . . . 17

DISPLAY Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

BT (BLUETOOTH) Setup. . . . . . . . . . . . . . . . . . . . . . 18

BT INIT (BLUETOOTH initialize) . . . . . . . . . . . . . 18

APP REM (App Remote) Setup . . . . . . . . . . . . . . . . 18

Additional Information

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

5GB

Guide to Parts and Controls

The number 3/ (repeat) button has a tactile dot.

 (browse) (page 12)

Enter the browse mode during playback.

 Front panel release button

 SEEK +/–

Tune in radio stations automatically. Press and

hold to tune manually.

/ (prev/next)

/ (fast-reverse/fast-forward)

 Control dial

Rotate to adjust the volume.

ENTER

Enter the selected item.

Press SRC, rotate then press to change the

source.

VOICE (page 14)

Activate voice dial.

When the App Remote function is on, the voice

recognition is activated (Android™ phone only).

-APP

Press and hold for more than 2 seconds to

establish App Remote function (connection).

N-Mark

Touch the control dial with Android phone to

make BLUETOOTH connection.

 Receptor for the remote commander

 Disc slot

 Display window

 (disc eject)

 SRC (source)

Turn on the power.

Change the source.

-OFF

Press and hold for 1 second to turn off the

power.

Press and hold for more than 2 seconds to turn

off the power and the display.

 (back)

Return to the previous display.

MODE (page 9, 11, 14)

 CALL

Enter the call menu. Receive/end a call.

Press and hold more than 2 seconds to switch

the BLUETOOTH signal.

 MENU

Open the setup menu.

-DSPL (display)

Press and hold, then press to change display

items.

 Number buttons (1 to 6)

Receive stored radio stations. Press and hold to

store stations.

Call a stored phone number. Press and hold to

store a phone number.

ALBUM /

Skip an album for audio device. Press and hold

to skip albums continuously.

(repeat)

(shuffle)

MIC (page 14)

PAUSE

Main unit

6GB

 AF (alternative frequencies)/TA (traffic

announcement)

Set AF and TA.

-PTY (program type)

Press and hold to select PTY in RDS.

 AUX input jack

 USB port

 Microphone (on inner panel)

In order for the handsfree function to work

properly, do not cover the microphone with

tape, etc.

Detaching the Front Panel

You can detach the front panel of this unit to

prevent theft.

1 Press and hold OFF .

The unit is turned off.

2 Press the front panel release button ,

then remove the panel by pulling it

towards you.

Caution alarm

If you turn the ignition switch to the OFF position

without detaching the front panel, the caution

alarm will sound for a few seconds. The alarm will

only sound if the built-in amplifier is used.

Serial numbers

Make sure the serial numbers on the bottom of the

unit and the back of the front panel are matched

correctly. Otherwise you cannot make BLUETOOTH

pairing, connection and disconnection by NFC.

Setting the Clock

1 Press MENU, rotate the control dial to

select [GENERAL], then press it.

2 Rotate the control dial to select [CLOCK-

ADJ], then press it.

The hour indication flashes.

Getting Started

Attaching the front panel

7GB

3 Rotate the control dial to set the hour

and minute.

To move the digital indication, press SEEK +/–.

4 After setting the minute, press MENU.

The setup is complete and the clock starts.

To display the clock, press DSPL.

Preparing a BLUETOOTH Device

You can enjoy music, or perform handsfree calling,

by connecting a suitable BLUETOOTH device. For

details on connecting, refer to the operating

instructions supplied with the device.

Before connecting the device, turn down the

volume of this unit; otherwise, loud sound may

result.

When connecting a BLUETOOTH device (cellular

phone, audio device, etc.) for the first time, mutual

registration (called “pairing”) is required. Pairing

enables this unit and other devices to recognize

each other.

1 Place the BLUETOOTH device within 1 m

(3 ft) of this unit.

2 Press CALL, rotate the control dial to

select [PAIRING], then press it.

flashes.

The unit enters pairing standby mode.

3 Perform pairing on the BLUETOOTH

device so it detects this unit.

4 Select [Sony Car Audio] shown in the

display of the BLUETOOTH device.

If [Sony Car Audio] does not appear, repeat from

step 2.

5 If passkey* input is required on the

BLUETOOTH device, input [0000].

* Passkey may be called “Passcode,” “PIN code,”

“PIN number” or “Password,” etc., depending on

the device.

When pairing is made, stays lit.

6 Select this unit on the BLUETOOTH device

to establish the BLUETOOTH connection.

or lights up when the connection is

made.

Note

While connecting to a BLUETOOTH device, this unit

cannot be detected from another device. To enable

detection, enter the pairing mode and search for this

unit from another device.

To cancel pairing

Perform step 2 to cancel the pairing mode after this

unit and the BLUETOOTH device are paired.

To use a paired device, connection with this unit is

required. Some paired devices will connect

automatically.

1 Press CALL, rotate the control dial to

select [BT SIGNL], then press it.

Make sure that lights up.

2 Activate the BLUETOOTH function on the

BLUETOOTH device.

3 Operate the BLUETOOTH device to

connect to this unit.

or lights up.

Icons in the display:

Pairing and connecting with a

BLUETOOTH device

Connecting with a paired BLUETOOTH

device

Lights up when a cellular phone is

connected to the unit.

Lights up when an audio device is

connected to the unit.

Indicates the signal strength status of

connected cellular phone.

[0000]

Input passkey

8GB

To connect the last-connected device from

this unit

Activate the BLUETOOTH function on the

BLUETOOTH device.

Press SRC.

Select [BT PHONE] or [BT AUDIO].

Press ENTER to connect with the cellular phone, or

PAUSE to connect with the audio device.

Note

While streaming BLUETOOTH audio, you cannot

connect from this unit to the cellular phone. Connect

from the cellular phone to this unit instead.

Tip

With BLUETOOTH signal on: when the ignition is turned

to on, this unit reconnects automatically to the last-

connected cellular phone.

To install the microphone

Installing the microphone (not supplied) will

improve audio quality while talking through this

unit. For details on how to connect the microphone,

refer to the operating instructions supplied with the

microphone.

By touching the control dial on the unit with an

NFC* compatible smartphone, the unit is paired and

connected with the smartphone automatically.

* NFC (Near Field Communication) is a technology

enabling short-range wireless communication

between various devices, such as mobile phones and

IC tags. Thanks to the NFC function, data

communication can be achieved easily just by

touching the relevant symbol or designated location

on NFC compatible devices.

For a smartphone with Android OS 4.0 or lower

installed, downloading the app “NFC Easy Connect”

available at Google Play™ is required. The app may

not be downloadable in some countries/regions.

1 Activate the NFC function on the

smartphone.

For details, refer to the operating instructions

supplied with the smartphone.

2 Touch the N-Mark part of the unit with

the N-Mark part of the smartphone.

Make sure that lights up on the display of the

unit.

To disconnect by One touch

Touch the N-Mark part of the unit with the N-Mark

part of the smartphone again.

Notes

 When making the connection, handle the

smartphone carefully to prevent scratches.

 One touch connection is not possible when the unit is

already connected to another NFC compatible device.

In this case, disconnect the other device, and make

connection with the smartphone again.

When an iPhone/iPod with iOS5 or later installed is

connected to the USB port, the unit is paired and

connected with the iPhone/iPod automatically.

To enable BLUETOOTH Auto Pairing, make sure

[AUTO PAIRING] in BT setup is set to [ON] (page 18).

1 Activate the BLUETOOTH function on the

iPhone/iPod.

2 Connect an iPhone/iPod to the USB port.

Make sure that lights up on the display of the

unit.

Note

BLUETOOTH Auto Pairing is not possible if the unit is

already connected to another BLUETOOTH device. In

this case, disconnect the other device, then connect the

iPhone/iPod again.

Connecting an iPod/USB Device

1 Turn down the volume on the unit.

2 Connect the iPod/USB device to the unit.

To connect an iPod/iPhone, use the USB

connection cable for iPod (not supplied).

Connecting with a Smartphone by One

touch (NFC)

Connecting with an iPhone/iPod

(BLUETOOTH Auto Pairing)

When connecting iPhone 5

9GB

Connecting Other Portable

Audio Device

1 Turn off the portable audio device.

2 Turn down the volume on the unit.

3 Connect the portable audio device to the

AUX input jack (stereo mini jack) on the

unit with a connecting cord (not

supplied)*.

* Be sure to use a straight type plug.

4 Press SRC to select [AUX].

To match the volume level of the connected

device to other sources

Start playback of the portable audio device at a

moderate volume, and set your usual listening

volume on the unit.

Press MENU and rotate the control dial.

Select [SOUND]  [AUX VOL] (page 18).

Listening to the Radio

To listen to the radio, press SRC to select [TUNER].

1 Press MODE to change the band (FM1,

FM2, FM3, MW or LW).

2 Press MENU, rotate the control dial to

select [GENERAL], then press it.

3 Rotate the control dial to select [BTM],

then press it.

The unit stores stations in order of frequency on

the number buttons.

1 Press MODE to change the band (FM1,

FM2, FM3, MW or LW).

2 Perform tuning.

To tune manually

Press and hold SEEK +/– to locate the

approximate frequency, then press SEEK +/–

repeatedly to fine adjust to the desired

frequency.

To tune automatically

Press SEEK +/–.

Scanning stops when the unit receives a station.

Repeat this procedure until the desired station

is received.

1 While receiving the station that you want

to store, press and hold a number button

(1 to 6) until [MEM] appears.

1 Select the band, then press a number

button (1 to 6).

Listening to the Radio

Storing automatically (BTM)

Tuning

Storing manually

Receiving the stored stations

10GB

Using Radio Data System (RDS)

AF continuously retunes the station to the strongest

signal in a network, and TA provides current traffic

information or traffic programs (TP) if received.

1 Press AF/TA to select [AF-ON], [TA-ON],

[AF/TA-ON] or [AF/TA-OFF].

To store RDS stations with the AF and TA

setting

You can preset RDS stations along with an AF/TA

setting. Set AF/TA, then store the station with BTM

or manually. If you preset manually, you can also

preset non-RDS stations.

To receive emergency announcements

With AF or TA on, emergency announcements will

automatically interrupt the currently selected

source.

To adjust the volume level during a traffic

announcement

Level will be stored into memory for subsequent

traffic announcements, independently from the

regular volume level.

To stay with one regional program

(REGIONAL)

When the AF and REGIONAL functions are on, you

will not be switched to another regional station

with a stronger frequency. If you leave this regional

program’s reception area, set [REG-OFF] in

GENERAL setup during FM reception (page 16).

This function does not work in the UK and some

other areas.

Local Link function (UK only)

This function enables you to select other local

stations in the area, even if they are not stored on

your number buttons.

During FM reception, press a number button (1 to 6)

on which a local station is stored. Within 5 seconds,

press again a number button of the local station.

Repeat this procedure until the local station is

received.

Use PTY to display or search for a desired program

type.

1 Press and hold PTY during FM reception.

2 Rotate the control dial until the desired

program type appears, then press it.

The unit starts to search for a station

broadcasting the selected program type.

Type of programs

The CT data from the RDS transmission sets the

clock.

1 Set [CT-ON] in GENERAL setup (page 16).

Setting alternative frequencies (AF) and

traffic announcement (TA)

Selecting program types (PTY)

NEWS (News), AFFAIRS (Current Affairs), INFO

(Information), SPORT (Sports), EDUCATE

(Education), DRAMA (Drama), CULTURE (Culture),

SCIENCE (Science), VARIED (Varied), POP M (Pop

Music), ROCK M (Rock Music), EASY M (M.O.R.

Music), LIGHT M (Light classical), CLASSICS (Serious

classical), OTHER M (Other Music), WEATHER

(Weather), FINANCE (Finance), CHILDREN

(Children’s program), SOCIAL A (Social Affairs),

RELIGION (Religion), PHONE IN (Phone In), TRAVEL

(Travel), LEISURE (Leisure), JAZZ (Jazz Music),

COUNTRY (Country Music), NATION M (National

Music), OLDIES (Oldies Music), FOLK M (Folk Music),

DOCUMENT (Documentary)

Setting clock time (CT)

11GB

Playing a Disc

1 Insert the disc (label side up).

Playback starts automatically.

Playing an iPod/USB Device

In these Operating Instructions, “iPod” is used as a

general reference for the iPod functions on an iPod

and iPhone, unless otherwise specified by the text

or illustrations.

For details on the compatibility of your iPod, see

“About iPod” (page 19) or visit the support site on

the back cover.

MSC (Mass Storage Class)-type USB devices (such as

a USB flash drive, digital media player, Android

phone) compliant with the USB standard can be

used.

Depending on the digital media player or Android

phone, setting the USB connection mode to MSC is

required.

Notes

 For details on the compatibility of your USB device,

visit the support site on the back cover.

 Playback of the following MP3/WMA/WAV files is not

supported.

 lossless compression files

 copyright-protected files

 DRM (Digital Rights Management) files

 Multi-channel audio files

1 Connect an iPod/USB device to the USB

port (page 8).

Playback starts.

If a device is already connected, to start

playback, press SRC to select [USB] ([IPD]

appears in the display when the iPod is

recognized).

2 Adjust the volume on this unit.

To stop playback

Press and hold OFF for 1 second.

To remove the device

Stop playback, then remove the device.

Caution for iPhone

When you connect an iPhone via USB, phone call

volume is controlled by the iPhone, not the unit. Do

not inadvertently increase the volume on the unit

during a call, as sudden loud sound may result

when the call ends.

Press and hold MODE during playback until [MODE

IPOD] appears to enable operation by the iPod

directly.

Note that the volume can be adjusted only by the

unit.

To exit passenger control

Press and hold MODE until [MODE AUDIO] appears.

Playing a BLUETOOTH Device

You can play contents on a connected device that

supports BLUETOOTH A2DP (Advanced Audio

Distribution Profile).

1 Make BLUETOOTH connection with the

audio device (page 7).

2 Press SRC to select [BT AUDIO].

3 Operate the audio device to start

playback.

Adjust the volume on this unit.

Notes

 Depending on the audio device, information such as

title, track number/time and playback status may not

be displayed on this unit.

 Even if the source is changed on this unit, playback of

the audio device does not stop.

 [BT AUDIO] does not appear in the display while

running the “App Remote” application via the

BLUETOOTH function.

To match the volume level of the BLUETOOTH

device to other sources

Start playback of the BLUETOOTH audio device at a

moderate volume, and set your usual listening

volume on the unit.

Press MENU and rotate the control dial.

Select [SOUND]  [BTA VOL] (page 18).

Playback

Operating an iPod directly (Passenger

control)

12GB

Searching and Playing Tracks

1 During playback, press (repeat) for

Repeat play, or (shuffle) for Shuffle

play.

2 Press (repeat) or (shuffle)

repeatedly to select the desired play

mode.

Playback in selected play mode may take time

to start.

Available play modes differ depending on the

selected sound source.

1 During CD, USB or BT audio device*

playback, press (browse)*

to display

the list of search categories.

When the track list appears, press (back)

repeatedly to display the desired search

category.

*1 Available only for audio devices supporting

AVRCP (Audio Video Remote Control Profile) 1.4

or above.

*2 During USB playback, press (browse) for

more than 2 seconds to directly return to the

beginning of the category list.

2 Rotate the control dial to select the

desired search category, then press it to

confirm.

3 Repeat step 2 to search the desired track.

Playback starts.

To exit the Quick-BrowZer mode

Press (browse).

1 Press (browse).

2 Press SEEK +.

3 Rotate the control dial to select the item.

The list is jumped in steps of 10% of the total

number of items.

4 Press ENTER to return to the Quick-

BrowZer mode.

The selected item appears.

5 Rotate the control dial to select the

desired item, then press it.

Playback starts.

Repeat play and shuffle play

Searching a track by name (Quick-

BrowZer™)

Searching by skipping items

(Jump mode)

13GB

To use a cellular phone, connect it with this unit. For

details, see “Preparing a BLUETOOTH Device”

(page 7).

Receiving a Call

1 Press CALL when a call is received with a

ringtone.

The phone call starts.

Note

The ringtone and talker’s voice are output only from the

front speakers.

To reject the call

Press and hold OFF for 1 second.

To end the call

Press CALL again.

Making a Call

You can make a call from the phonebook or call

history when a cellular phone supporting PBAP

(Phone Book Access Profile) is connected.

1 Press CALL, rotate the control dial to

select [PHONEBOOK], then press it.

2 Rotate the control dial to select an initial

from the initial list, then press it.

3 Rotate the control dial to select a name

from the name list, then press it.

4 Rotate the control dial to select a

number from the number list, then press

it.

The phone call starts.

1 Press CALL, rotate the control dial to

select [RECENT CALL], then press it.

A list of the call history appears.

2 Rotate the control dial to select a name

or phone number from the call history,

then press it.

The phone call starts.

1 Press CALL, rotate the control dial to

select [DIAL NUMBER], then press it.

2 Rotate the control dial to enter the

phone number, and lastly select [ ]

(space), then press ENTER*.

The phone call starts.

* To move the digital indication, press SEEK +/–.

Note

[_] appears instead of [#] on the display.

1 Press CALL, rotate the control dial to

select [REDIAL], then press it.

The phone call starts.

You can store up to 6 contacts in the preset dial.

1 Select a phone number that you want to

store in the preset dial, from the

phonebook, call history or by inputting

the phone number directly.

The phone number appears in the display of

this unit.

2 Press and hold a number button (1 to 6)

until [MEM] appears.

The contact is stored in the selected preset

number.

1 Press SRC, rotate the control dial to select

[BT PHONE], then press it.

2 Press a number button (1 to 6) to select

the contact you want to call.

3 Press ENTER.

The phone call starts.

Handsfree Calling

Calling from the phonebook

Calling from the call history

Calling by phone number input

Calling by redial

Presetting phone numbers

Calling by preset number

14GB

You can make a call by saying the voice tag stored

in a connected cellular phone that has a voice

dialing function.

1 Press CALL, rotate the control dial to

select [VOICE DIAL], then press it.

Alternatively, press ENTER while the App

Remote function is off.

2 Say the voice tag stored on the cellular

phone.

Your voice is recognized, and the call is made.

To cancel voice dialing

Press ENTER.

Available Operations during

Call

To preset the volume of the ringtone and

talker’s voice

You can preset the volume level of the ringtone and

talker’s voice.

Adjusting the ringtone volume:

Rotate the control dial while receiving a call.

Adjusting the talker’s voice volume:

Rotate the control dial during a call.

To adjust the volume for the other party (Mic

gain adjustment)

Press MIC.

Adjustable volume levels: [MIC-LOW], [MIC-MID],

[MIC-HI].

To reduce echo and noise (Echo Canceler/

Noise Canceler Mode)

Press and hold MIC.

Settable mode: [EC/NC-1], [EC/NC-2].

To transfer a call

In order to activate/deactivate the appropriate

device (this unit/cellular phone), press MODE or use

your cellular phone.

Note

Depending on the cellular phone, handsfree connection

may be cut off when call transfer is attempted.

To check the status of SMS/email*

flashes when a new SMS/email is received, and

stays lit when there are unread messages.

* Available only for a cellular phone supporting MAP

(Message Access Profile).

App Remote with iPhone/

Android Phone

Downloading the “App Remote”

application is required from the

App Store for iPhone or from

Google Play for Android phone.

Using the “App Remote”

application, the following

features are available:

 Operate the unit to launch and control

compatible applications on iPhone/Android

phone.

 Operate iPhone/Android phone with simple

finger gestures to control the source of the unit.

 Launch an application/audio source or search

the keyword on the application by saying a word

or phrase into the microphone (Android phone

only).

 Read out incoming text messages, SMS, email,

Twitter, Facebook, Calendar, etc., automatically,

and the text messages, SMS and email can be

replied (Android phone only).

 Adjust the sound settings (EQ10, Balance/Fader,

Listening Position) of the unit via iPhone/

Android phone.

Notes

 For your safety, follow your local traffic laws and

regulations, and do not operate the application while

driving.

 Available operations differ depending on the

applications. For details on available applications,

visit the support site on the back cover.

 App Remote ver. 2.0 via USB is compatible with iOS 5/

iOS 6 installed iPhones.

 App Remote ver. 2.0 via BLUETOOTH is compatible

with Android devices with Android 2.2, 2.3, 3.*, 4.0, 4.1

or 4.2 installed.

 Voice recognition function does not work depending

on your smartphone. In that case, go to [Settings] –

select [Voice Recognition].

 SMS/E-mail/Notification reading is available for

Android devices with TTS engine installed.

 The “Smart Connect” application, provided by Sony

Mobile Communications, is necessary for Twitter/

Facebook/Calendar, etc., notification read out.

1 Connect iPhone to the USB port or

Android phone with the BLUETOOTH

function.

2 Launch the “App Remote” application.

Calling by voice tags

Useful Functions

Establishing the App Remote

connection

15GB

3 Press and hold APP on the unit for more

than 2 seconds.

Connection to iPhone/Android phone starts.

For details on the operations on iPhone/

Android phone, see the help of the application.

If the device number appears

Make sure that the same numbers are displayed

(e.g., 123456) in this unit and the mobile device,

then press ENTER on this unit and select [Yes] on

the mobile device.

To terminate connection

Press and hold APP.

Selecting the source or application

You can operate the unit to select the desired

source or application on your smartphone.

1 Rotate the control dial to select the desired source

or application, then press it.

To select another source or application, press SRC

then rotate the control dial to select the desired

source or application.

Announcement of various information by

voice guide (Android phone only)

When SMS/E-mail, Twitter/Facebook/Calendar

notifications, etc., are received, they are

automatically announced through the car speakers.

For details on settings, refer to the help of the

application.

Activating voice recognition (Android

phone only)

By registering applications, you can control an

application by voice command. For details, refer to

the help of the application.

To activate voice recognition

1 Press ENTER to activate voice recognition.

2 Say the desired voice command into the

microphone when [Say Source or App] appears on

the Android phone.

Notes

 Voice recognition may not be available in some cases.

 Voice recognition may not work properly depending

on the performance of the connected Android phone.

 Operate under conditions where noise such as engine

sound is minimized during voice recognition.

 Using an external microphone (not supplied) will

improve voice recognition.

When a music or video application is

selected*

Press 1 or 2 to enter HID mode, and press SEEK +/–

to select a playback item, then press ENTER to start

playback.

* Available only for an Android phone supporting HID

(Human Interface Device Profile).

Making sound settings

You can adjust the settings for EQ, BAL/FAD/SW

Level and Position via your smartphone.

For details on settings, refer to the help of the

application.

16GB

Canceling the DEMO Mode

You can cancel the demonstration display which

appears while this unit is turned off.

1 Press MENU, rotate the control dial to

select [DISPLAY], then press it.

2 Rotate the control dial to select [DEMO],

then press it.

3 Rotate the control dial to select [DEMO-

OFF], then press it.

The setting is complete.

4 Press (back) twice.

The display returns to normal reception/play

mode.

Basic Setting Operation

You can set items in the menu to the following

procedure.

The following items can be set depending on the

source and setting.

1 Press MENU.

2 Rotate the control dial to select the setup

category, then press it.

Setup categories are follows:

 GENERAL setup (page 16)

 SOUND setup (page 16)

 DISPLAY setup (page 18)

 BT (BLUETOOTH) setup (page 18)

 APP REM (App Remote) setup (page 18)

3 Rotate the control dial to select the

options, then press it.

To return to the previous display

Press (back).

GENERAL Setup

CLOCK-ADJ (clock adjust) (page 6)

CAUT ALM (caution alarm) (page 6)

Activates the caution alarm: [ON], [OFF].

(Available only when the unit is turned off.)

BEEP

Activates the beep sound: [ON], [OFF].

AUTO OFF

Shuts off automatically after a desired time

when the unit is turned off: [NO], [30S] (30

seconds), [30M] (30 minutes), [60M] (60

minutes).

AUX-A (AUX audio)

Activates the AUX source display: [ON], [OFF].

(Available only when the unit is turned off.)

REAR/SUB

Switches the audio output: [SUB-OUT]

(subwoofer), [REAR-OUT](power amplifier).

(Available only when the unit is turned off.)

CT (clock time) (page 10)

Activates the CT function: [ON], [OFF].

REGIONAL

Restricts reception to a specific region: [ON],

[OFF]. (Available only when FM is received.)

BTM (page 9)

SOUND Setup

C.AUDIO+ (clear audio+)

Reproduces sound by optimizing the digital

signal with the Sony recommended sound

settings: [ON], [OFF]. (Automatically sets to [OFF]

when [EQ10 PRESET] is changed).

EQ10 PRESET

Selects an equalizer curve from 10 equalizer

curves or off: [R AND B], [ROCK], [POP], [DANCE],

[HIP-HOP], [ELECTRONICA], [JAZZ], [SOUL],

[COUNTRY], [CUSTOM], [OFF].

The equalizer curve setting can be memorized

for each source.

EQ10 SETTING

Sets [CUSTOM] of EQ10.

BASE

Selects a preset equalizer curve as a basis for

further customizing: [BAND1] 32 Hz, [BAND2] 63

Hz, [BAND3] 125 Hz, [BAND4] 250 Hz, [BAND5]

500 Hz, [BAND6] 1 kHz, [BAND7] 2 kHz, [BAND8]

4 kHz, [BAND9] 8 kHz, [BAND10] 16 kHz.

The volume level is adjustable in 1 dB steps,

from -6 dB to +6 dB.

Settings

17GB

POSITION (listening position)

SET F/R POS (set front/rear position)

Simulates a natural sound field by delaying the

sound output from front/rear speaker to suit

your position.

FRONT L (): Front left

FRONT R (): Front right

FRONT (): Center front

ALL (): In the center of your car

CUSTOM: Position set by App Remote

OFF: No position set

ADJ POSITION* (adjust position)

Fine-tunes the listening position setting.

Adjustable range: [+3] – [CENTER] – [-3].

SET SW POS* (set subwoofer position)

NEAR (): Near

NORMAL (): Normal

FAR (): Far

BALANCE

Adjusts the sound balance: [RIGHT-15] –

[CENTER] – [LEFT-15].

FADER

Adjusts the relative level: [FRONT-15] – [CENTER]

– [REAR-15].

DSEE (digital sound enhancement engine)

Improves digitally compressed sound by

restoring high frequencies lost in the

compression process.

This setting can be memorized for each source

other than the tuner.

Selects the DSEE mode: [ON], [OFF].

LOUDNESS

Reinforces bass and treble for clear sound at low

volume levels: [ON], [OFF].

AAV (advanced auto volume)

Adjust the playback volume level of all playback

sources to the optimum level: [ON], [OFF].

RB ENH (rear bass enhancer)

Rear Bass Enhancer enhances the bass sound by

applying a low pass filter setting to the rear

speakers. This function allows the rear speakers

to work as a subwoofer if one is not connected.

(Available only when [SW DIREC] is set to [OFF].)

RBE MODE (rear bass enhancer mode)

Selects the rear bass enhancer mode: [1], [2], [3],

[OFF].

LPF FREQ (low pass filter frequency)

Selects the subwoofer cut-off frequency: [50Hz],

[60Hz], [80Hz], [100Hz], [120Hz].

LPF SLOP (low pass filter slope)

Selects the LPF slope: [1], [2], [3].

SW DIREC (subwoofer direct connection)

You can use the subwoofer without a power

amplifier when it is connected to the rear

speaker cord. (Available only when [RBE MODE]

is set to [OFF].)

Be sure to connect a 4 - 8 ohm subwoofer to

either of the rear speaker cords. Do not connect

a speaker to the other rear speaker cord.

SW MODE (subwoofer mode)

Selects the subwoofer mode: [1], [2], [3], [OFF].

SW PHASE (subwoofer phase)

Selects the subwoofer phase: [NORM], [REV].

SW POS* (subwoofer position)

Selects the subwoofer position: [NEAR],

[NORMAL], [FAR].

LPF FREQ (low pass filter frequency)

Selects the subwoofer cut-off frequency: [50Hz],

[60Hz], [80Hz], [100Hz], [120Hz].

LPF SLOP (low pass filter slope)

Selects the LPF slope: [1], [2], [3].

S.WOOFER (subwoofer)

SW LEVEL (subwoofer level)

Adjusts the subwoofer volume level:

[+10 dB] – [0 dB] – [-10 dB].

([ATT] is displayed at the lowest setting.)

SW PHASE (subwoofer phase)

Selects the subwoofer phase: [NORM], [REV].

SW POS* (subwoofer position)

Selects the subwoofer position: [NEAR],

[NORMAL], [FAR].

LPF FREQ (low pass filter frequency)

Selects the subwoofer cut-off frequency: [50Hz],

[60Hz], [80Hz], [100Hz], [120Hz].

LPF SLOP (low pass filter slope)

Selects the LPF slope: [1], [2], [3].

HPF (high pass filter)

HPF FREQ (high pass filter frequency)

Selects the front/rear speaker cut-off frequency:

[OFF], [50Hz], [60Hz], [80Hz], [100Hz], [120Hz].

HPF SLOP (high pass filter slope)

Selects the HPF slope (effective only when [HPF

FREQ] is set to other than [OFF]): [1], [2], [3].

18GB

AUX VOL (AUX volume level)

Adjusts the volume level for each connected

auxiliary device: [+18 dB] – [0 dB] – [-8 dB].

This setting negates the need to adjust the

volume level between sources.

BTA VOL (BLUETOOTH audio volume level)

Adjusts the volume level for each connected

BLUETOOTH device: [+6 dB] – [0 dB] – [-6 dB].

This setting negates the need to adjust the

volume level between sources.

* Does not appear when [SET F/R POS] is set to [OFF].

DISPLAY Setup

DEMO (demonstration)

Activates the demonstration: [ON], [OFF].

DIMMER

Changes the display brightness: [ON], [OFF].

ILLUM (Illumination)

Changes the illumination color: [1], [2].

AUTO SCR (auto scroll)

Scrolls long items automatically: [ON], [OFF].

BT (BLUETOOTH) Setup

This setup menu can be also opened by pressing

CALL.

PAIRING (page 7)

PHONEBOOK (page 13)

REDIAL (page 13)

RECENT CALL (page 13)

VOICE DIAL (page 14)

DIAL NUMBER (page 13)

RINGTONE

Selects whether this unit or the connected

cellular phone outputs the ringtone: [1] (this

unit), [2] (cellular phone).

AUTO ANS (auto answer)

Sets this unit to answer an incoming call

automatically: [OFF], [1] (about 3 seconds), [2]

(about 10 seconds).

AUTO PAIRING

Start BLUETOOTH pairing automatically when

iOS device version 5.0 or later is connected via

USB: [ON], [OFF].

BT SIGNL (BLUETOOTH signal) (page 7)

Activates the BLUETOOTH function: [ON], [OFF].

BT INIT (BLUETOOTH initialize)

Initializes all the BLUETOOTH related settings

(pairing information, preset number, device

information, etc.).

When disposing the unit, initialize all the

settings.

APP REM (App Remote) Setup

Establish and terminate App Remote function

(connection).

19GB

Precautions

 Cool off the unit beforehand if your car has been

parked in direct sunlight.

 Do not leave the front panel or audio devices

brought in inside the car, or it may cause

malfunction due to high temperature in direct

sunlight.

 Power antenna (aerial) extends automatically.

Moisture condensation

Should moisture condensation occur inside the

unit, remove the disc and wait for about an hour for

it to dry out; otherwise the unit will not operate

properly.

To maintain high sound quality

Do not splash liquid onto the unit or discs.

 Do not expose discs to direct sunlight or heat

sources such as hot air ducts, nor leave it in a car

parked in direct sunlight.

 Before playing, wipe the discs

with a cleaning cloth from the

center out. Do not use

solvents such as benzine,

thinner, commercially

available cleaners.

 This unit is designed to play

back discs that conform to the

Compact Disc (CD) standard.

DualDiscs and some of the music discs encoded

with copyright protection technologies do not

conform to the Compact Disc (CD) standard,

therefore, these discs may not be playable by this

unit.

 Discs that this unit CANNOT play

 Discs with labels, stickers, or sticky tape or

paper attached. Doing so may cause a

malfunction, or may ruin the disc.

 Discs with non-standard shapes (e.g., heart,

square, star). Attempting to do so may damage

the unit.

 8 cm (3

/4 in) discs.

Notes on CD-R/CD-RW discs

 The maximum number of: (CD-R/CD-RW only)

 folders (albums): 150 (including root folder)

 files (tracks) and folders: 300 (may less than

300 if folder/file names contain many

characters)

 displayable characters for a folder/file name: 32

(Joliet)/64 (Romeo)

 If the multi-session disc begins with a CD-DA

session, it is recognized as a CD-DA disc, and

other sessions are not played back.

 Discs that this unit CANNOT play

 CD-R/CD-RW of poor recording quality.

 CD-R/CD-RW recorded with an incompatible

recording device.

 CD-R/CD-RW which is finalized incorrectly.

 CD-R/CD-RW other than those recorded in

music CD format or MP3 format conforming to

ISO9660 Level 1/Level 2, Joliet/Romeo or multi-

session.

 You can connect to the following iPod models.

Update your iPod devices to the latest software

before use.

Compatible iPhone/iPod models

Additional Information

Notes on discs

Playback order of MP3/WMA files

About iPod

Compatible Model USB

iPhone 5 

iPhone 4S 

iPhone 4 

iPhone 3GS 

iPhone 3G 

iPod touch (5th generation) 

iPod touch (4th generation) 

iPod touch (3rd generation) 

iPod touch (2nd generation) 

iPod classic 

iPod nano (7th generation) 

iPod nano (6th generation) 

iPod nano (5th generation) 

iPod nano (4th generation) 

iPod nano (3rd generation) 

MP3/WMA

Folder (album)

MP3/WMA file (track)

20GB

 “Made for iPod” and “Made for iPhone” mean that

an electronic accessory has been designed to

connect specifically to iPod or iPhone,

respectively, and has been certified by the

developer to meet Apple performance standards.

Apple is not responsible for the operation of this

device or its compliance with safety and

regulatory standards. Please note that the use of

this accessory with iPod or iPhone may affect

wireless performance.

What is BLUETOOTH technology?

 BLUETOOTH wireless technology is a short-range

wireless technology that enables wireless data

communication between digital devices, such as

a cellular phone and a headset. BLUETOOTH

wireless technology operates within a range of

about 10 m (33 ft). Connecting two devices is

common, but some devices can be connected to

multiple devices at the same time.

 You do not need to use a cable for connection

since BLUETOOTH technology is a wireless

technology, neither is it necessary for the devices

to face one another, such is the case with infrared

technology. For example, you can use such a

device in a bag or pocket.

 BLUETOOTH technology is an international

standard supported by millions of companies all

over the world, and employed by various

companies worldwide.

On BLUETOOTH communication

 BLUETOOTH wireless technology operates within

a range of about 10 m (33 ft).

Maximum communication range may vary

depending on obstacles (person, metal, wall, etc.)

or electromagnetic environment.

 The following conditions may affect the sensitivity

of BLUETOOTH communication.

 There is an obstacle such as a person, metal, or

wall between this unit and BLUETOOTH device.

 A device using 2.4 GHz frequency, such as a

wireless LAN device, cordless telephone, or

microwave oven, is in use near this unit.

 Because BLUETOOTH devices and wireless LAN

(IEEE802.11b/g) use the same frequency,

microwave interference may occur and result in

communication speed deterioration, noise, or

invalid connection if this unit is used near a

wireless LAN device. In such as case, perform the

following.

 Use this unit at least 10 m (33 ft) away from the

wireless LAN device.

 If this unit is used within 10 m (33 ft) of a

wireless LAN device, turn off the wireless LAN

device.

 Install this unit and BLUETOOTH device as near

to each other as possible.

 Microwaves emitting from a BLUETOOTH device

may affect the operation of electronic medical

devices. Turn off this unit and other BLUETOOTH

devices in the following locations, as it may cause

an accident.

 where inflammable gas is present, in a hospital,

train, airplane, or petrol station

 near automatic doors or a fire alarm

 This unit supports security capabilities that

comply with the BLUETOOTH standard to provide

a secure connection when the BLUETOOTH

wireless technology is used, but security may not

be enough depending on the setting. Be careful

when communicating using BLUETOOTH wireless

technology.

 We do not take any responsibility for the leakage

of information during BLUETOOTH

communication.

 Connection with all BLUETOOTH devices cannot

be guaranteed.

 A device featuring BLUETOOTH function is

required to conform to the BLUETOOTH

standard specified by BLUETOOTH SIG, and be

authenticated.

 Even if the connected device conforms to the

above mentioned BLUETOOTH standard, some

devices may not be connected or work

correctly, depending on the features or

specifications of the device.

 While talking on the phone hands free, noise

may occur, depending on the device or

communication environment.

 Depending on the device to be connected, it may

require some time to start communication.

Others

 Using the BLUETOOTH device may not function on

cellular phones, depending on radio wave

conditions and location where the equipment is

being used.

 If you experience discomfort after using the

BLUETOOTH device, stop using the BLUETOOTH

device immediately. Should any problem persist,

consult your nearest Sony dealer.

If you have any questions or problems concerning

your unit that are not covered in this manual,

consult your nearest Sony dealer.

About BLUETOOTH function

La pagina sta caricando ...

Sony MEX-N4000BT Manuale del proprietario

Marca: Sony

Modello: MEX-N4000BT

Categoria: Ricevitori multimediali per auto

Tipo: Manuale del proprietario

Scarica il pdf

rapporto

in altre lingue

English: Sony MEX-N4000BT Owner's manual
français: Sony MEX-N4000BT Le manuel du propriétaire
Deutsch: Sony MEX-N4000BT Bedienungsanleitung
Nederlands: Sony MEX-N4000BT de handleiding

Sony MEX-N4000BT Manuale del proprietario

Sony MEX-N4000BT Manuale del proprietario

in altre lingue

Documenti correlati