Ubiquiti UAP-Outdoor Guida Rapida

Outdoor WiFi System

Models:

UAP-Outdoor/UAP-Outdoor 5G

1

Introduction

Thank you for purchasing a UniFi AP-Outdoor series product.

This Quick Start Guide is for use with the following models:

Model Operating Frequency*

UAP-Outdoor 2.4 GHz

UAP-Outdoor 5G 5 GHz

* For detailed specifications, refer to the User Guide on the CD.

Package Contents

Outdoor WiFi System

Models:

UAP-Outdoor/UAP-Outdoor 5G

UniFi

AP-Outdoor

Wall Mount

Bracket

Metal Strap Quick Start

Guide

UniFi Controller

CD with User Guide

Antennas

24V PoE

Adapter

Power Cord Screws

(Qty. 3)

Anchors

2

UniFi

™

AP-Outdoor

System Requirements

• Microsoft Windows XP, Windows Vista, Windows 7, or Mac OS X

• Java Runtime Environment 1.6 (or above)

• Web Browser: Mozilla Firefox, Google Chrome, or Microsoft

Internet Explorer 8 (or above)

Installation Requirements

• Drill and 6 mm drill bit (for wall-mounting)

• Flathead screwdriver (for pole-mounting)

• Shielded Category 5 (or above) cabling should be used for all

wired Ethernet connections and should be grounded through

the AC ground of the PoE.

We recommend that you protect your networks from the

most brutal environments and devastating ESD attacks

with industrial-grade shielded Ethernet cable from Ubiquiti

Networks. For more details, visit www.ubnt.com/toughcable

3

Network Topology Requirements

• A DHCP-enabled network (for the AP to obtain an IP address as

well as for the wireless clients after deployment)

• A management station computer running the UniFi Controller

software, located either onsite and connected to the same

Layer-2 network, or off-site in a cloud or NOC

or

Router

O-Site

Cloud/NOC

2

On-Site

Management Station

Wired

UAP-Outdoor

Wireless

Uplinked

1

UAP-Outdoor

Wired

UAP-Outdoor 5G

Wired

UAP-Outdoor 5G

Wired

UAP-Outdoor

Sample Network Diagram

¹ Please refer to the UniFi Outdoor WiFi System | UAP-Outdoor

User Guide on the CD for setting up wireless-linked APs.

² All UniFi APs support off-site management controllers. See the

User Guide for setup details.

4

UniFi

™

AP-Outdoor

Hardware Overview

Connects to

Antennas

Removable Cover

Secondary

Ethernet Port

Main

Ethernet Port

Note: The Secondary Ethernet Port can be used as as an

uplink for other devices once they have been adopted.

5

Hardware Overview

LED

LED Color Status

Flashing Amber Initializing.

Steady Amber Factory default, waiting to be integrated.

Alternating

Amber/Green

Device is busy; do not touch or unplug it.

This usually indicates that a process such as a

firmware upgrade is taking place.

Quickly Flashing

Green

This is used to locate an AP.

When you click Locate in the UniFi Controller

software, the AP will flash. It will also display

the location of the AP on the map.

Steady Green Indicates the device has been successfully

integrated into a network and is working

properly.

Steady Green

with occasional

flashing

Indicates the device is in an isolated state (all

WLANs are brought down until an uplink is

found).

6

UniFi

™

AP-Outdoor

Hardware Installation

The AP is powered by the included PoE (Power over Ethernet)

Adapter. To install the AP:

1. Connect an Ethernet cable to the Main Ethernet Port on the AP.

Connect the other end of the Ethernet cable to the Ethernet

port labeled POE on the PoE Adapter.

2. Connect an Ethernet cable from your LAN to the Ethernet port

labeled LAN on the PoE Adapter.

7

Hardware Installation

3. Connect the power cord to the power port on the PoE Adapter.

Connect the other end of the power cord to a power outlet.

Below is an overview of the Power over Ethernet connections.

Power Connection Diagram

Note: The AP supports Passive PoE, which works with the

included PoE adapter. If you want to power the AP from

an 802.3af compliant switch, Ubiquiti Networks offers the

optional Instant 802.3af Adapter to instantly transform

any PoE device into a fully 48V 802.3af compliant product.

Product details are available on our website at

http://ubnt.com/8023af

8

UniFi

™

AP-Outdoor

Mounting the UniFi AP-Outdoor

The AP can be mounted on a wall or pole.

Wall Mount

To mount the AP on a wall, use the included Wall Mount Bracket,

screws, and anchors.

1. Align the Wall Mount Bracket to the desired position on a wall.

2. Use a pencil to mark the holes on the wall.

3. Use a drill and 6 mm drill bit to drill the holes in the wall.

4. Insert the 3 screw anchors into the wall.

5. Secure the Wall Mount Bracket to the wall by inserting the

self-tapping screws into the anchors.

9

Hardware Installation

6. Align the notches on the AP with the notches on the Wall

Mount Bracket, and slide the AP down until it locks into place.

Pole Mount

To mount the AP on a pole, use the included Metal Strap:

1. Open the Metal Strap by turning the locking mechanism

counter-clockwise. You can loosen it by hand or use a flathead

screwdriver.

10

UniFi

™

AP-Outdoor

2. Straighten out the end of the Metal Strap and slide it through

the back of the AP.

3. Wrap the Metal Strap around the pole and use a flathead

screwdriver to tighten the locking mechanism by turning it

clockwise.

11

Antenna Installation

Connect each antenna to an antenna connector by rotating it

clockwise.

12

UniFi

™

AP-Outdoor

Software Installation

Insert the UniFi Controller software CD into your CD-ROM drive

and follow the instructions for your specific computer type.

Mac Users

1. Click the Install icon.

2. Click Continue and follow the on-screen instructions to install

the software.

13

Software Installation

3. Go to Go > Applications and double-click the UniFi icon.

Proceed to Configuring the UniFi Controller Software on page 15.

PC Users

1. Launch UniFi-installer.exe.

2. Click Install.

3. If your computer doesn't have Java 1.6 or above installed, you

will be prompted to install it. Click Install to continue.

14

UniFi

™

AP-Outdoor

4. Click Next.

5. Ensure that the Start UniFi Controller after installation option is

checked and click Finish.

Note: The UniFi Controller software can also be launched

from Start > All Programs.

15

Software Installation

Configuring the UniFi Controller Software

1. The UniFi Controller software startup will begin. When the

option becomes available, click Launch a Browser to Manage

Wireless Network.

2. Select your language and country. Click Next.

Note: U.S. product versions are locked to the U.S. Country

Code to ensure compliance with FCC regulations.

3. Select the devices that you want to configure and click Next.

16

UniFi

™

AP-Outdoor

4. The UniFi Installation Wizard will create a secure, primary

wireless network for your devices. Perform the following steps:

a. Enter the wireless network name (SSID) in the Secure SSID

field.

b. Enter a passphrase to be used for your primary network.

c. To enable guest access, select Enable Guest Access and

enter a guest network name in the Guest SSID field.

d. Click Next.

5. Enter an admin name and password to use when accessing the

management interface. Confirm your password in the Confirm

field. Click Next.

17

Software Installation

6. Review your settings. Click Back to make changes or Finish to

save your settings. When finished, you will be redirected to the

management interface via your Web browser.

Congratulations, your wireless network is now configured.

A login screen will appear for the UniFi Controller management

interface. Enter the admin name and password that you created

and click Login.

You can manage your wireless network and view network statistics

using the UniFi Controller management interface. For information

on configuring and using the UniFi Controller software, refer to the

User Guide located on the CD.

18

UniFi

™

AP-Outdoor

Installer Compliance Responsibility

Devices must be professionally installed and it is the professional

installer's responsibility to make sure the device is operated within

local country regulatory requirements.

Safety Notices

1. Read, follow, and keep these instructions.

2. Heed all warnings.

3. Only use attachments/accessories specified by the manufacturer.

WARNING: Do not use this product in location that can be

submerged by water.

WARNING: Avoid using this product during an electrical

storm. There may be a remote risk of electric shock from

lightning.

Electrical Safety Information

1. Compliance is required with respect to voltage, frequency, and current

requirements indicated on the manufacturer’s label. Connection to a

different power source than those specified may result in improper

operation, damage to the equipment or pose a fire hazard if the

limitations are not followed.

2. There are no operator serviceable parts inside this equipment. Service

should be provided only by a qualified service technician.

3. This equipment is provided with a detachable power cord which has

an integral safety ground wire intended for connection to a grounded

safety outlet.

a. Do not substitute the power cord with one that is not the provided

approved type. Never use an adapter plug to connect to a 2-wire

outlet as this will defeat the continuity of the grounding wire.

b. The equipment requires the use of the ground wire as a part of the

safety certification, modification or misuse can provide a shock

hazard that can result in serious injury or death.

c. Contact a qualified electrician or the manufacturer if there are

questions about the installation prior to connecting the equipment.

d. Protective earthing is provided by Listed AC adapter. Building

installation shall provide appropriate short-circuit backup

protection.

e. Protective bonding must be installed in accordance with local

national wiring rules and regulations.

La pagina si sta caricando...

Ubiquiti UAP-Outdoor Guida Rapida

Questo manuale è adatto anche per

Ubiquiti UAP-Outdoor Guida Rapida

in altre lingue

Documenti correlati

Altri documenti