LD Systems U305.1 R2 Manuale del proprietario

USER´S MANUAL

BEDIENUNGSANLEITUNG

MANUEL D´UTILISATION

MANUAL DE USUARIO

INSTRUKCJA OBSŁUGI

MANUALE D´USO

U300

®

SERIES

DIVERSITY WIRELESS SYSTEMS

CONTENTS / INHALTSVERZEICHNIS / CONTENU / CONTENIDO / TREŚĆ / CONTENUTO

ENGLISH

PREVENTIVE MEASURES 3

INTRODUCTION 5

CONNECTIONS, OPERATING AND DISPLAY ELEMENTS 6

PIN ALLOCATION FOR MINI XLR CONNECTOR

(POCKET TRANSMITTER) 10

TROUBLESHOOTING 11

OPTIONAL ACCESSORIES 11

TECHNICAL DATA 13

MANUFACTURER’S DECLARATIONS 17

DEUTSCH

SICHERHEITSHINWEISE 18

EINFÜHRUNG 19

ANSCHLÜSSE, BEDIEN- UND ANZEIGEELEMENTE 20

BELEGUNG MINI-XLR-ANSCHLUSS (TASCHENSENDER) 25

FEHLERSUCHE 26

OPTIONALES ZUBEHÖR 26

TECHNISCHE DATEN 28

HERSTELLERERKLÄRUNGEN 32

FRANCAIS

MESURES PRÉVENTIVES 33

INTRODUCTION 34

RACCORDEMENTS, ÉLÉMENTS DE COMMANDE ET

D’AFFICHAGE 35

AFFECTATION DU CONNECTEUR MINI-XLR

(ÉMETTEUR DE POCHE) 40

DIAGNOSTIC DES PANNES 41

ACCESSOIRES DISPONIBLES EN OPTION 41

CARACTÉRISTIQUES TECHNIQUES 43

DÉCLARATIONS DU FABRICANT 47

ESPAÑOL

MEDIDAS DE SEGURIDAD 48

INTRODUCCIÓN 49

CONEXIONES, ELEMENTOS DE MANEJO Y ELEMENTOS

DE VISUALIZACIÓN 50

ASIGNACIÓN DE PINES PARA CONEXIÓN MINI XLR

(TRANSMISOR DE PETACA) 55

BÚSQUEDA DE ERRORES 56

ACCESORIOS OPCIONALES 56

DATOS TÉCNICOS 58

DECLARACIONES DEL FABRICANTE 62

POLSKI

ŚRODKI OSTROŻNOŚCI 63

WPROWADZENIE 64

PRZYŁĄCZA, ELEMENTY OBSŁUGI I WSKAŹNIKI 65

SCHEMAT ZŁĄCZA MINI XLR (NADAJNIK KIESZONKOWY) 70

ZNAJDOWANIE BŁĘDU 71

AKCESORIA OPCJONALNE 71

DANE TECHNICZNE 73

OŚWIADCZENIA PRODUCENTA 78

ITALIANO

MISURE PRECAUZIONALI 79

INTRODUZIONE 80

CONNETTORI, ELEMENTI DI COMANDO E DI VISUALIZZAZIONE 81

CONFIGURAZIONE DEL COLLEGAMENTO MINI XLR

(TRASMETTITORE TASCABILE) 86

RICERCA ERRORI 87

ACCESSORI OPZIONALI 87

DATI TECNICI 89

DICHIARAZIONI DEL PRODUTTORE 94

3

DEUTSCHFRANCAIS

ESPAÑOL

ENGLISH

ITALIANO POLSKI

ENGLISH

YOU‘VE MADE THE RIGHT CHOICE!

We have designed this product to operate reliably over many years. LD Systems stands for this with its name and many years of experience as a

manufacturer of high-quality audio products. Please read this User‘s Manual carefully, so that you can begin making optimum use of your LD

Systems product quickly. You can nd more information about LD-SYSTEMS at our Internet site WWW.LD-SYSTEMS.COM

PREVENTIVE MEASURES

1. Please read these instructions carefully.

2. Keep all information and instructions in a safe place.

3. Follow the instructions.

4. Observe all safety warnings. Never remove safety warnings or other information from the equipment.

5. Use the equipment only in the intended manner and for the intended purpose.

6. Use only sufciently stable and compatible stands and/or mounts (for xed installations). Make certain that wall mounts are properly installed and

secured. Make certain that the equipment is installed securely and cannot fall down.

7. During installation, observ e the applicable safety regulations for your country.

8. Never install and operate the equipment near radiators, heat registers, ovens or other sources of heat. Make certain that the equipment is always installed

so that is cooled sufciently and cannot overheat.

9. Never place sources of ignition, e.g., burning candles, on the equipment.

10. Ventilation slits must not be blocked.

11. Keep a minimum distance of 20 cm around and above the device.

12. Do not use this equipment in the immediate vicinity of water (does not apply to special outdoor equipment - in this case, observe the special

instructions noted below. Do not expose this equipment to ammable materials, uids or gases. Avoid direct sunlight!

13. Make certain that dripping or splashed water cannot enter the equipment. Do not place containers lled with liquids, such as vases or drinking

vessels, on the equipment.

14. Make certain that objects cannot fall into the device.

15. Use this equipment only with the accessories recommended and intended by the manufacturer.

16. Do not open or modify this equipment.

17. After connecting the equipment, check all cables in order to prevent damage or accidents, e.g., due to tripping hazards.

18. During transport, make certain that the equipment cannot fall down and possibly cause property damage and personal injuries.

19. If your equipment is no longer functioning properly, if uids or objects have gotten inside the equipment or if it has been damaged in anot her way,

switch it off immediately and unplug it from the mains outlet (if it is a powered device). This equipment may only be repaired by authorized, qualied

personnel.

20. Clean the equipment using a dry cloth.

21. Comply with all applicable disposal laws in your country. During disposal of packaging, please separate plastic and paper/cardboard.

22. Plastic bags must be kept out of reach of children.

23. Please note that changes or modications not expressly approved by the party responsible for compliance could void the user´s authority to

operate the equipment.

FOR EQUIPMENT THAT CONNECTS TO THE POWER MAINS

24. CAUTION: If the power cord of the device is equipped with an earthing contact, then it must be connected to an outlet with a protective ground.

Never deactivate the protective ground of a power cord.

25. If the equipment has been exposed to strong uctuations in temperature (for example, after transport), do not switch it on immediately. Mois-

ture and condensation could damage the equipment. Do not switch on the equipment until it has reached room temperature.

26. Before connecting the equipment to the power outlet, rst verify that the mains voltage and frequency match the values specied on the equip-

ment. If the equipment has a voltage selection switch, connect the equipment to the power outlet only if the equipment values and the mains

power values match. If the included power cord or power adapter does not t in your wall outlet, contact your electrician.

27. Do not step on the power cord. Make certain that the power cable does not become kinked, especially at the mains outlet and/or power adapter

and the equipment connector.

28. When connecting the equipment, make certain that the power cord or power adapter is always freely accessible. Always disconnect the equip-

ment from the power supply if the equipment is not in use or if you want to clean the equipment. Always unplug the power cord and power adapter

from the power outlet at the plug or adapter and not by pulling on the cord. Never touch the power cord and power adapter with wet hands.

29. Whenever possible, avoid switching the equipment on and off in quick succession because otherwise this can shorten the useful life of the

equipment.

30. IMPORTANT INFORMATION: Replace fuses only with fuses of the same type and rating. If a fuse blows repeatedly, please contact an authorised

service centre.

31. To disconnect the equipment from the power mains completely, unplug the power cord or power adapter from the power outlet.

32. If your device is equipped with a Volex power connector, the mating Volex equipment connector must be unlocked before it can be removed. Howe-

ver, this also means that the equipment can slide and fall down if the power cable is pulled, which can lead to personal injuries and/or other damage.

For this reason, always be careful when laying cables.

33. Unplug the power cord and power adapter from the power outlet if there is a risk of a lightning strike or before extended periods of disuse.

4

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCHENGLISH

CAUTION:

To reduce the risk of electric shock, do not remove cover (or back). There are no user serviceable parts inside.

Maintenance and repairs should be exclusively carried out by qualied service personnel.

The warning triangle with lightning symbol indicates dangerous uninsulated voltage inside the unit, which may cause an electrical

shock.

The warning triangle with exclamation mark indicates important operating and maintenance instructions.

Warning! This symbol indicates a hot surface. Certain parts of the housing can become hot during operation. After use, wait for a

cool-down period of at least 10 minutes before handling or transporting the device.

Warning! This device is designed for use below 2000 metres in altitude.

Warning! This product is not intended for use in tropical climates.

CAUTION! HIGH VOLUMES IN AUDIO PRODUCTS!

This device is meant for professional use. Therefore, commercial use of this equipment is subject to the respectively applicable national accident

prevention rules and regulations. As a manufacturer, Adam Hall is obligated to notify you formally about the existence of potential health risks.

Hearing damage due to high volume and prolonged exposure: When in use, this product is capable of producing high sound-pressure levels (SPL)

that can lead to irreversible hearing damage in performers, employees, and audience members. For this reason, avoid prolonged exposure to

volumes in excess of 90 dB.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

5

DEUTSCHFRANCAIS

ESPAÑOL

ENGLISH

ITALIANO POLSKI

INTRODUCTION

Developed in Germany, the UHF Diversity wireless systems from the U300® series deliver excellent audio performance. They achieve a range of 100

meters in ideal conditions and are available in 5 frequency bands. Up to six U300® systems can be used simultaneously for each frequency band.

Convenient one-touch synchronisation of transmitter and receiver via infrared facilitates fast, trouble-free wireless connection and the squelch function

with pilot tone ensures fail-safe operation.

• Available with hand or pocket transmitter

• ASC infrared frequency synchronisation

• Fail-safe operation provided by pilot tone

• 12 channels

• Up to 6 systems can be used simultaneously (up to 3 twin receivers)

• Belt-pack transmitter with gain control and status LED

• Dynamic hand-held microphone with status LED

• U500® microphone heads also suitable for U300® hand-held transmitter

• Long battery life

• Available in the following frequencies:

470 - 490 MHz (LDU3047)

514 - 542 MHz (LDU3051)

584 - 608 MHz (LDU305)

655 - 679 MHz (LDU306)

823 - 832 MHz and 863–865 MHz (LDU308)

Please note: The use of the wireless microphone system may require a license, depending on the country of use. For detailed information please

contact the relevant authority in your country.

Pilot tone

The pilot tone function protects a wireless microphone system against interference, for example, unwanted signals from other radio transmission

systems. The transmitter adds a second, inaudible signal (the pilot tone) to the actual signal which is to be transmitted. The receiver identies it as

the matching pilot tone and frees the associated signal. Signals without a matching pilot tone remain muted.

Included

LDU30xHHD: Receiver plus hand-held transmitter with dynamic capsule (cardioid), power supply, 2 x AA batteries, audio cable, manual

LDU30xBPH: Receiver plus pocket transmitter and headset (black), power supply, 2 x AA batteries, audio cable, manual

LDU30xBPG: Receiver plus pocket transmitter and guitar cable, power supply, 2 x AA batteries, audio cable, manual

LDU30xBPL: Receiver plus pocket transmitter and Lavalier microphone, power supply, 2 x AA batteries, audio cable, manual

LDU30xBPW: Receiver plus pocket transmitter and clip-on microphone for wind instruments, power supply, 2 x AA batteries, audio cable, manual

LDU30xHHD2: Twin receiver plus 2 x hand-held transmitters with dynamic capsules (cardioid), power supply, 4 x AA batteries, 2 x audio cables, rack kit, manual

LDU30xBPH2: Twin receiver plus 2 x pocket transmitters and 2 x headsets (black), power supply, 4 x AA batteries, 2 x audio cables, rack kit, manual

6

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCHENGLISH

9

1

22

33 77

55

66

44

9

88

9

1 2

3 7 5

6

4

9

8

1

POWER

On/off switch. Press and hold the button for approximately 1 seconds to turn the device on or off.

2

CHANNEL DISPLAY

Illuminated LC display to show the radio channel.

3

CHANNEL + / -

Push buttons to select the radio channel 01 to 12. To establish a wireless connection between the transmitter and the receiver, the radio frequency

on both receivers must match (synchronisation process as described under point 6. ASC).

Note: Both receivers cannot be set to the same radio channel on the twin receiver.

4

VOL

Rotary knob to adjust the output volume.

5

IR INTERFACE

Infrared interface for synchronising the receiver’s radio channel with the transmitter.

6

ASC

To synchronise the transmitter with the radio channel set in the receiver, position the infra-red port of the transmitter directly in line with the infra-red

interface of the receiver and switch on the transmitter and receiver (distance about 10 cm, IR interface of the hand transmitter is below the status LED,

IR interface of the pocket transmitter on the front side). Now press the ASC button to start the synchronisation process. A red LED indicator will light up

in the window of the IR interface during the process. After a few seconds, the process is completed and one of the LED indicators ANTENNA A and B will

light up (= wireless connection exists).

7

LEVEL INDICATOR

5-segment LED chain to display the audio signal level.

CONNECTIONS, OPERATING AND DISPLAY ELEMENTS

RECEIVER

7

DEUTSCHFRANCAIS

ESPAÑOL

ENGLISH

ITALIANO POLSKI

11

10

12 15 1217

1613 13

14 14

11

10

12

13

14

8

ANTENNA A - B

Indicator LEDs for the antenna systems A and B. The antenna system with the stronger radio signal is activated and the corresponding indicator LED

lights up.

9

RECEPTION ANTENNAS A - B

For optimum reception, please position the antennas in an upward-facing V-position.

10

DC SOCKET

Low-voltage socket for the power supply to the device. Please use only the supplied mains adapter.

11

CABLE STRAIN-RELIEF

Cable strain relief for power adapter cable.

12

UNBALANCED OUTPUT

Unbalanced audio output via 6.3mm jack socket.

13

INSTRUMENT/LINE (UNBALANCED OUTPUT)

Switch for level and impedance-matching to instruments or line inputs of an amplier or mixer. Using a suitable tool (e.g. a ballpoint pen), push the

switch into the depressed INSTRUMENT position for connection to the input of an instrument amplier (guitar or bass amp) and for connection to

the line-input of a mixer or amplier, select the non-depressed position LINE.

14

BALANCED OUTPUT

Balanced audio output via 3-pin XLR jack.

15

UNBALANCED OUTPUT MIX OUT

Unbalanced audio output via 6.3mm jack socket (twin receiver only, mix of signals from channels 1 and 2).

16

INSTRUMENT/LINE MIX OUT (UNBALANCED OUTPUT)

Switch for adjusting the level and impedance of the jack output to the instrument or line inputs of an amplier or mixer. Using a suitable tool (e.g. a

ballpoint pen), push the switch into the depressed INSTRUMENT position for connecting the receiver to the input of an instrument amplier (guitar

or bass amp). To connect to the line-input of a mixer or amplier, select the non-depressed position LINE.

8

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCHENGLISH

23

22

19

20

21

18

MICROPHONE HEAD

The microphone head is interchangeable, the hand-held transmitter is compatible with the microphone heads from the LD U500® series, available

separately.

19

ON / OFF

On/off switch. Move the switch to the ON position to turn on the hand-held transmitter, and to the OFF position to turn it off.

20

STATUS LED

If the charge status of the batteries is sufcient, the LED lights up green when the hand transmitter is switched on. If the LED lights up red, the charge

status is weak. In this case, replace the batteries (2 x AA/LR6 type, alkaline). During the synchronisation process, the LED ashes green and amber.

21

IR INTERFACE

Infra-red interface for synchronising the radio channel from receiver and transmitter.

22

BATTERY COMPARTMENT COVER

To replace the batteries, open the hand transmitter battery compartment by rotating it anti-clockwise and pulling it from the housing. Remove the used

batteries and replace with new batteries (AA), following the diagram in the battery compartment. Replace the battery compartment cover and rotate it

clockwise to close the battery compartment. If the transmitter is not used for a long period, remove the batteries to avoid damage to the transmitter from

leaking batteries.

23

BATTERY COMPARTMENT

Battery compartment for two AA batteries. Please use only leak-proof brand products.

HAND-HELD TRANSMITTER

17

BALANCED OUTPUT MIX OUT

Balanced audio output via 3-pole XLR socket (twin receiver only, mix of signals from channels 1 and 2).

9

DEUTSCHFRANCAIS

ESPAÑOL

ENGLISH

ITALIANO POLSKI

25

24

29

27

26

28

30

POCKET TRANSMITTER

24

ANTENNA

Pocket transmitter antenna. For optimum reception, do not cover or kink.

25

IR INTERFACE

Infra-red interface for synchronising the radio channel from receiver and transmitter.

26

INPUT

3-pin mini XLR socket to connect a headset, Lavalier or instrument microphone and guitar cable.

27

ON / STANDBY / OFF

Switch to activate or deactivate the pocket transmitter (ON = transmitter is switched on, OFF = transmitter is switched off). In the STANDBY position,

the transmitter is in operation but the audio signal is muted.

28

STATUS LED

If the charge status of the batteries is sufcient, the LED lights up green when the pocket transmitter is switched on. If the LED lights up red, the charge

status is weak. In this case, replace the batteries (2 x AA/LR6 type, alkaline). During the synchronisation process, the LED ashes green and amber.

29

MIC / 0dB / -10dB

For setting the input sensitivity. Adjust the sensitivity so that an active signal (speech, vocals, guitar...) causes the amber-coloured level-LED on the

receiver to light up. If the red PEAK LED lights up or ashes, reduce the sensitivity on the 3-position switch MIC/0dB/-10dB to the next lower value to

prevent otherwise unwanted distortion. (Examples: Headset = MIC, guitar with passive pickups = 0dB, guitar with active pickups = -10dB).

30

BATTERY COMPARTMENT

To replace the batteries, open the battery compartment of the pocket transmitter by simultaneously pressing both markers on the sides of the battery

cover and opening it forwards. Remove the used batteries and replace with new batteries (AA/LR6, alkaline), following the diagram in the battery

compartment. Replace the battery compartment cover on the housing and click it into place. If the transmitter is not used for a long period, remove the

batteries to avoid damage to the transmitter from leaking batteries.

10

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCHENGLISH

ATTACHING THE POCKET TRANSMITTER

Attach the transmitter to a belt or strap as shown.

1

2

3

MINI-XLR

sleeve tip

6,3 mm jack

1

2

3

MINI-XLR

1

2

3

MINI-XLR

R

2,2k

PIN ALLOCATION FOR MINI XLR CONNECTOR (POCKET TRANSMITTER)

Guitar, bass and other high-impedance signal sources.

Condenser microphone with internal pull-up resistor.

Condenser microphone without internal pull-up resistor.

11

DEUTSCHFRANCAIS

ESPAÑOL

ENGLISH

ITALIANO POLSKI

TROUBLESHOOTING

PROBLEM SYMPTOM SOLUTION

No audio signal or level

too low

Receiver: No reception displayed on either antenna

A or B.

Check if the transmitter is turned on.

Check the batteries in the transmitter.

Receiver: Display lighting is switched off Check the power supply for the receiver and whether

the receiver is switched on.

Receiver: No reception displayed on either antenna

A or B.

Transmitter: Device is switched on. Charge status of the

batteries is ok.

Check whether radio frequency of the transmitter and

the receiver are matching.

Reduce the distance between transmitter and receiver.

Ensure that there is a direct line of sight between the

transmitter and the receiver.

Ensure that the antennas on the receiver are posi-

tioned in an upward V-shape.

Receiver: Reception on antenna A or B is displayed. Increase the signal level or increase the input sensitivi-

ty on the pocket transmitter.

Distortion and interference Receiver: Radio signal is displayed Remove possible sources of interference (digital

devices, other radio systems).

Distorted sound Transmitter: Status LED is lit up red.

Receiver: Peak LED on the receiver is lit.

Replace the batteries in the transmitter.

Reduce the signal level or reduce the input sensitivity

on the pocket transmitter.

OPTIONAL ACCESSORIES

LDU500CH – microphone head with condenser capsule and hypercardioid pickup pattern (for hand-held transmitters, matt black)

LDU500DH – microphone head with dynamic capsule and hypercardioid pickup pattern (for hand-held transmitters, matt black)

LDU500CC – microphone head with condenser capsule and cardioid pickup pattern (for hand-held transmitters, matt silver)

LDU500DC – microphone head with dynamic capsule and cardioid pickup pattern (for hand-held transmitters, matt silver)

LDWS100MH3 – beige-coloured headset with condenser microphone (for pocket transmitters)

LDWS100MH1 – black headset with condenser microphone (for pocket transmitters)

LDWS1000MW – clip microphone for wind instruments (for pocket transmitters)

LDWS100ML – Lavalier microphone (for pocket transmitters)

LDWS100GC – guitar cable (for pocket transmitters)

LDU300RK – 19" rack mounting kit for the installation of a single receiver (2 rack-mount brackets, 2 caps and 1 set of screws included).

12

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCHENGLISH

1 2 3

LDU500RK2 – 19" rack mounting kit for the installation of two single receivers (2 rack-mount brackets, 2 connectors and 1 set of screws included).

Installation

1. Attach connectors (receiver A on the right-hand side, receiver B on the left-hand side).

2. Screw both receivers together.

3. Attach brackets (receiver A on the left-hand side, receiver B on the right-hand side).

LDU300RK2 – 19” rack mounting kit for the installation of a dual receiver (includes blanking plugs and mounting screws).

13

DEUTSCHFRANCAIS

ESPAÑOL

ENGLISH

ITALIANO POLSKI

RECEIVER

Itemnumber: LDU3047R LDU3051R LDU305R LDU306R LDU308R

Receiver type: UHF diversity UHF diversity UHF diversity UHF diversity UHF diversity

Modulation: FM FM FM FM FM

Frequency range: 470 - 490 MHz 514 - 542 MHz 584–608 MHz 655–679 MHz 823–832 MHz &

863–865 MHz

Channels: 12 12 12 12 12

Antenna connectors: 2 x xed antennas 2 x xed antennas 2 x xed antennas 2 x xed antennas 2 x xed antennas

Frequency response: 25–16000 Hz 25–16000 Hz 25–16000 Hz 25–16000 Hz 25–16000 Hz

Noise reduction: Squelch, xed level Squelch, xed level Squelch, xed level Squelch, xed level Squelch, xed level

THD (system): <0.3% <0.3% <0.3% <0.3% <0.3%

Signal-to-noise ratio

(system):

>104dB >104dB >104dB >104dB >104dB

Balanced output: XLR XLR XLR XLR XLR

Unbalanced output: 6.3 mm jack 6.3 mm jack 6.3 mm jack 6.3 mm jack 6.3 mm jack

Audio output level

(balanced):

+10dBu +10dBu +10dBu +10dBu +10dBu

Audio output level

(unbalanced):

+7dBV/+2.5dBV

(switchable line/

instrument)

+7dBV/+2.5dBV

(switchable line/

instrument)

+7dBV/+2.5dBV

(switchable line/

instrument)

+7dBV/+2.5dBV

(switchable line/

instrument)

+7dBV/+2.5dBV

(switchable line/

instrument)

Controls: POWER, + / - channel

select, ASC, VOL vol-

ume control, switch

INSTRUMENT/LINE

POWER, + / - channel

select, ASC, VOL vol-

ume control, switch

INSTRUMENT/LINE

POWER, + / - channel

select, ASC, VOL vol-

ume control, switch

INSTRUMENT/LINE

POWER, + / - channel

select, ASC, VOL vol-

ume control, switch

INSTRUMENT/LINE

POWER, + / - channel

select, ASC, VOL vol-

ume control, switch

INSTRUMENT/LINE

Indicators: 2 digit LC display,

5-segment LED level

meter, antenna A/B

LEDs

2 digit LC display,

5-segment LED level

meter, antenna A/B

LEDs

2 digit LC display,

5-segment LED level

meter, antenna A/B

LEDs

2 digit LC display,

5-segment LED level

meter, antenna A/B

LEDs

2 digit LC display,

5-segment LED level

meter, antenna A/B

LEDs

Operating voltage: 12V DC, 500 mA 12V DC, 500 mA 12V DC, 500 mA 12V DC, 500 mA 12V DC, 500 mA

Ambient temperature

(in operation):

5°C to 40°C 5°C to 40°C 5°C to 40°C 5°C to 40°C 5°C to 40°C

Relative humidity: 20% to 80%

(non-condensing)

20% to 80%

(non-condensing)

20% to 80%

(non-condensing)

20% to 80%

(non-condensing)

20% to 80%

(non-condensing)

Dimensions

(W x H x D):

211 x 43 x 120 mm 211 x 43 x 120 mm 211 x 43 x 120 mm 211 x 43 x 120 mm 211 x 43 x 120 mm

Weight: 0.7 kg 0.7 kg 0.7 kg 0.7 kg 0.7 kg

Accessories included: power adapter power adapter power adapter power adapter power adapter

Features: infra-red frequency

synchronisation,

pilot tone

infra-red frequency

synchronisation,

pilot tone

infra-red frequency

synchronisation,

pilot tone

infra-red frequency

synchronisation,

pilot tone

infra-red frequency

synchronisation,

pilot tone

TECHNICAL DATA

14

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCHENGLISH

DUAL RECEIVER

Itemnumber: LDU3047R2 LDU3051R2 LDU305R2 LDU306R2 LDU308R2

Receiver type: UHF diversity UHF diversity UHF diversity UHF diversity UHF diversity

Modulation: FM FM FM FM FM

Frequency range: 470 - 490 MHz 514 - 542 MHz 584–608 MHz 655–679 MHz 823–832 MHz &

863–865 MHz

Channels: 12 12 12 12 12

Antenna connectors: 2 x xed antennas 2 x xed antennas 2 x xed antennas 2 x xed antennas 2 x xed antennas

Frequency response: 25–16000 Hz 25–16000 Hz 25–16000 Hz 25–16000 Hz 25–16000 Hz

Noise reduction: Squelch, xed level Squelch, xed level Squelch, xed level Squelch, xed level Squelch, xed level

THD (system): <0.3% <0.3% <0.3% <0.3% <0.3%

Signal-to-noise ratio

(system):

>104dB >104dB >104dB >104dB >104dB

Balanced output: 2x XLR 2x XLR 2x XLR 2x XLR 2x XLR

Unbalanced output: 2x 6.3 mm jack 2x 6.3 mm jack 2x 6.3 mm jack 2x 6.3 mm jack 2x 6.3 mm jack

Balanced output

MIX OUT:

XLR XLR XLR XLR XLR

Unbalanced output

MIX OUT:

6.3 mm jack 6.3 mm jack 6.3 mm jack 6.3 mm jack 6.3 mm jack

Audio output level

(balanced):

+10dBu +10dBu +10dBu +10dBu +10dBu

Audio output level

(unbalanced):

+7dBV/+2.5dBV

(switchable line/

instrument)

+7dBV/+2.5dBV

(switchable line/

instrument)

+7dBV/+2.5dBV

(switchable line/

instrument)

+7dBV/+2.5dBV

(switchable line/

instrument)

+7dBV/+2.5dBV

(switchable line/

instrument)

Controls: POWER, 2x + / -

channel select, 2x

ASC, 2x VOL Volume

control, 2x switch

INSTRUMENT/LINE

POWER, 2x + / -

channel select, 2x

ASC, 2x VOL Volume

control, 2x switch

INSTRUMENT/LINE

POWER, 2x + / -

channel select, 2x

ASC, 2x VOL Volume

control, 2x switch

INSTRUMENT/LINE

POWER, 2x + / -

channel select, 2x

ASC, 2x VOL Volume

control, 2x switch

INSTRUMENT/LINE

POWER, 2x + / -

channel select, 2x

ASC, 2x VOL Volume

control, 2x switch

INSTRUMENT/LINE

Indicators: 2x 2 digit LC display,

2x 5-segment LED

level meter, 2x

antenna A / B LEDs

2x 2 digit LC display,

2x 5-segment LED

level meter, 2x

antenna A / B LEDs

2x 2 digit LC display,

2x 5-segment LED

level meter, 2x

antenna A / B LEDs

2x 2 digit LC display,

2x 5-segment LED

level meter, 2x

antenna A / B LEDs

2x 2 digit LC display,

2x 5-segment LED

level meter, 2x

antenna A / B LEDs

Operating voltage: 12V DC, 500 mA 12V DC, 500 mA 12V DC, 500 mA 12V DC, 500 mA 12V DC, 500 mA

Ambient temperature

(in operation):

5°C to 40°C 5°C to 40°C 5°C to 40°C 5°C to 40°C 5°C to 40°C

Relative humidity: 20% to 80%

(non-condensing)

20% to 80%

(non-condensing)

20% to 80%

(non-condensing)

20% to 80%

(non-condensing)

20% to 80%

(non-condensing)

Dimensions

(W x H x D):

410 x 43 x 120mm 410 x 43 x 120mm 410 x 43 x 120mm 410 x 43 x 120mm 410 x 43 x 120mm

Weight: 1.3 kg 1.3 kg 1.3 kg 1.3 kg 1.3 kg

15

DEUTSCHFRANCAIS

ESPAÑOL

ENGLISH

ITALIANO POLSKI

HAND-HELD TRANSMITTER

Item number: LDU3047MD LDU3051MD LDU305MD LDU306MD LDU308MD

Modulation: FM FM FM FM FM

Frequency range: 470 - 490 MHz 514 - 542 MHz 584–608 MHz 655–679 MHz 823–832 MHz &

863–865 MHz

Channels: 12 12 12 12 12

Microphone type: Dynamic Dynamic Dynamic Dynamic Dynamic

Polar pattern: Cardioid Cardioid Cardioid Cardioid Cardioid

Frequency response: 55–16000 Hz 55–16000 Hz 55–16000 Hz 55–16000 Hz 55–16000 Hz

RF output power: 10 mW PEP 10 mW PEP 10 mW PEP 10 mW PEP 10 mW PEP

Antenna gain: 0.5 dBi 0.5 dBi 0.5 dBi 0.5 dBi 0.5 dBi

Controls: Power on/off Power on/off Power on/off Power on/off Power on/off

Indicators: Status LED Status LED Status LED Status LED Status LED

Power supply: 2 x AA batteries 2 x AA batteries 2 x AA batteries 2 x AA batteries 2 x AA batteries

Operating time: up to 10 h

(depending on

batteries)

up to 10 h

(depending on

batteries)

up to 10 h

(depending on

batteries)

up to 10 h

(depending on

batteries)

up to 10 h

(depending on

batteries)

Ambient temperature

(in operation):

5°C to 40°C 5°C to 40°C 5°C to 40°C 5°C to 40°C 5°C to 40°C

Relative humidity: 20% to 80%

(non-condensing)

20% to 80%

(non-condensing)

20% to 80%

(non-condensing)

20% to 80%

(non-condensing)

20% to 80%

(non-condensing)

Dimensions (L x Ø): 257 x 50 mm 257 x 50 mm 257 x 50 mm 257 x 50 mm 257 x 50 mm

Weight

(without batteries):

0.235 kg 0.235 kg 0.235 kg 0.235 kg 0.235 kg

Accessories included: 2 x AA batteries 2 x AA batteries 2 x AA batteries 2 x AA batteries 2 x AA batteries

Features: infra-red frequency

synchronisation,

pilot tone,

microphone head

interchangeable

infra-red frequency

synchronisation,

pilot tone,

microphone head

interchangeable

infra-red frequency

synchronisation,

pilot tone,

microphone head

interchangeable

infra-red frequency

synchronisation,

pilot tone,

microphone head

interchangeable

infra-red frequency

synchronisation,

pilot tone,

microphone head

interchangeable

BODY PACK TRANSMITTER

Item number: LDU3047BP LDU3051BP LDU305BP LDU306BP LDU308BP

Modulation: FM FM FM FM FM

Frequency range: 470 - 490 MHz 514 - 542 MHz 584–608 MHz 655–679 MHz 823–832 MHz &

863–865 MHz

Accessories included: Power adapter,

audio cable, rack kit

Power adapter,

audio cable, rack kit

Power adapter,

audio cable, rack kit

Power adapter,

audio cable, rack kit

Power adapter,

audio cable, rack kit

Features: Infrared frequency

synchronisation,

pilot tone

Infrared frequency

synchronisation,

pilot tone

Infrared frequency

synchronisation,

pilot tone

Infrared frequency

synchronisation,

pilot tone

Infrared frequency

synchronisation,

pilot tone

16

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCHENGLISH

MICROPHONES FOR BODY PACK TRANSMITTER

Item number: LDWS100MH1 LDWS100ML LDWS1000MW

Microphone type: Headset Lavalier

microphone

Wind instrument

microphone

Capsule: Back-electret

condenser

Back-electret

condenser

Back-electret

condenser

Polar pattern: Cardioid Cardioid Cardioid

Frequency response: 20–20000 Hz 20–20000 Hz 20–18000 Hz

Connector: 3-pin mini-XLR 3-pin mini-XLR 3-pin mini-XLR

Accessories included: Foam windscreen Foam windscreen Foam windscreen

Channels: 12 12 12 12 12

Input: 3-pin mini-XLR

(low-Z + phantom

power/high-Z)

3-pin mini-XLR

(low-Z + phantom

power/high-Z)

3-pin mini-XLR

(low-Z + phantom

power/high-Z)

3-pin mini-XLR

(low-Z + phantom

power/high-Z)

3-pin mini-XLR

(low-Z + phantom

power/high-Z)

Frequency response: 25–16,000 Hz 25–16,000 Hz 25–16,000 Hz 25–16,000 Hz 25–16,000 Hz

RF output power: 10 mW PEP 10 mW PEP 10 mW PEP 10 mW PEP 10 mW PEP

Antenna gain: 0.5 dBi 0.5 dBi 0.5 dBi 0.5 dBi 0.5 dBi

Controls: ON/STANDBY/OFF,

MIC/0/-10

ON/STANDBY/OFF,

MIC/0/-10

ON/STANDBY/OFF,

MIC/0/-10

ON/STANDBY/OFF,

MIC/0/-10

ON/STANDBY/OFF,

MIC/0/-10

Indicators: Status LED Status LED Status LED Status LED Status LED

Power supply: 2 x AA batteries 2 x AA batteries 2 x AA batteries 2 x AA batteries 2 x AA batteries

Operating time: Up to 10 h

(depending on

batteries)

Up to 10 h

(depending on

batteries)

Up to 10 h

(depending on

batteries)

Up to 10 h

(depending on

batteries)

Up to 10 h

(depending on

batteries)

Ambient temperature

(in operation):

5°C to 40°C 5°C to 40°C 5°C to 40°C 5°C to 40°C 5°C to 40°C

Relative humidity: 20% to 80%

(non-condensing)

20% to 80%

(non-condensing)

20% to 80%

(non-condensing)

20% to 80%

(non-condensing)

20% to 80%

(non-condensing)

Dimensions

(W x H x D):

65 x 91 x 25 mm 65 x 91 x 25 mm 65 x 91 x 25 mm 65 x 91 x 25 mm 65 x 91 x 25 mm

Weight

(without batteries):

0.085 kg 0.085 kg 0.085 kg 0.085 kg 0.085 kg

Accessories included: 2 x AA batteries 2 x AA batteries 2 x AA batteries 2 x AA batteries 2 x AA batteries

Features: infra-red frequency

synchronisation,

pilot tone

infra-red frequency

synchronisation,

pilot tone

infra-red frequency

synchronisation,

pilot tone

infra-red frequency

synchronisation,

pilot tone

infra-red frequency

synchronisation,

pilot tone

17

DEUTSCHFRANCAIS

ESPAÑOL

ENGLISH

ITALIANO POLSKI

GUITAR CABLE FOR BODY PACK TRANSMITTER

Item number: LDWS100GC

Connector 1: 3-pin mini-XLR

Connector 2: 6.3 mm jack

Cable length: 1.5 m

MANUFACTURER´S DECLARATIONS

MANUFACTURER‘S WARRANTY & LIMITATIONS OF LIABILITY

You can nd our current warranty conditions and limitations of liability at: https://cdn-shop.adamhall.com/media/pdf/MANUFACTURERS-DECLARA-

TIONS_LD_SYSTEMS.pdf To request warranty service for a product, please contact Adam Hall GmbH, Adam-Hall-Str. 1,

61267 Neu Anspach / Email: [email protected] / +49 (0)6081 / 9419-0.

CORRECT DISPOSAL OF THIS PRODUCT

(valid in the European Union and other European countries with a differentiated waste collection system)

This symbol on the product, or on its documents indicates that the device may not be treated as household waste. This is to avoid environ-

mental damage or personal injury due to uncontrolled waste disposal. Please dispose of this product separately from other waste and have it

recycled to promote sustainable economic activity. Household users should contact either the retailer where they purchased this product, or their

local government ofce, for details on where and how they can recycle this item in an environmentally friendly manner. Business users should

contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial waste

for disposal.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation

CE Compliance

Adam Hall GmbH states that this product meets the following guidelines (where applicable):

R&TTE (1999/5/EC) or RED (2014/53/EU) from June 2017

Low voltage directive (2014/35/EU)

EMV directive (2014/30/EU)

RoHS (2011/65/EU)

The complete declaration of conformity can be found at www.adamhall.com.

Furthermore, you may also direct your enquiry to [email protected].

EU DECLARATION OF CONFORMITY

Hereby, Adam Hall GmbH declares that this radio equipment type is in compliance with Directive 2014/53/EU.

The full text of the EU declaration of conformity is available at the following

internet address: www.adamhall.com/compliance/

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

18

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCHENGLISH

DEUTSCH

SIE HABEN DIE RICHTIGE WAHL GETROFFEN!

Dieses Gerät wurde unter hohen Qualitätsanforderungen entwickelt und gefertigt, um viele Jahre einen reibungslosen Betrieb zu gewährleisten. Dafür

steht LD Systems mit seinem Namen und der langjährigen Erfahrung als Hersteller hochwertiger Audioprodukte. Bitte lesen Sie diese Bedienungsanlei-

tung sorgfältig, damit Sie Ihr neues Produkt von LD Systems schnell optimal einsetzen können.

Mehr Informationen zu LD SYSTEMS nden Sie auf unserer Internetseite WWW.LD-SYSTEMS.COM

SICHERHEITSHINWEISE

1. Lesen Sie diese Anleitung bitte sorgfältig durch.

2. Bewahren Sie alle Informationen und Anleitungen an einem sicheren Ort auf.

3. Befolgen Sie die Anweisungen.

4. Beachten Sie alle Warnhinweise. Entfernen Sie keine Sicherheitshinweise oder andere Informationen vom Gerät.

5. Verwenden Sie das Gerät nur in der vorgesehenen Art und Weise.

6. Verwenden Sie ausschließlich stabile und passende Stative bzw. Befestigungen (bei Festinstallationen). Stellen Sie sicher, dass Wandhalterungen

ordnungsgemäß installiert und gesichert sind. Stellen Sie sicher, dass das Gerät sicher installiert ist und nicht herunterfallen kann.

7. Beachten Sie bei der Installation die für Ihr Land geltenden Sicherheitsvorschriften.

8. Installieren und betreiben Sie das Gerät nicht in der Nähe von Heizkörpern, Wärmespeichern, Öfen oder sonstigen Wärmequellen. Sorgen Sie dafür,

dass das Gerät immer so installiert ist, dass es ausreichend gekühlt wird und nicht überhitzen kann.

9. Platzieren Sie keine Zündquellen wie z.B. brennende Kerzen auf dem Gerät.

10. Lüftungsschlitze dürfen nicht blockiert werden.

11. Halten Sie einen Mindestabstand von 20 cm seitlich und oberhalb des Geräts ein.

12. Betreiben Sie das Gerät nicht in unmittelbarer Nähe von Wasser. Bringen Sie das Gerät nicht mit brennbaren Materialien, Flüssigkeiten oder

Gasen in Berührung. Direkte Sonneneinstrahlung vermeiden!

13. Sorgen Sie dafür, dass kein Tropf- oder Spritzwasser in das Gerät eindringen kann. Stellen Sie keine mit Flüssigkeit gefüllten Behältnisse wie

Vasen oder Trinkgefäße auf das Gerät.

14. Sorgen Sie dafür, dass keine Gegenstände in das Gerät fallen können.

15. Betreiben Sie das Gerät nur mit dem vom Hersteller empfohlenen und vorgesehenen Zubehör.

16. Öffnen Sie das Gerät nicht und verändern Sie es nicht.

17. Überprüfen Sie nach dem Anschluss des Geräts alle Kabelwege, um Schäden oder Unfälle, z. B. durch Stolperfallen zu vermeiden.

18. Achten Sie beim Transport darauf, dass das Gerät nicht herunterfallen und dabei möglicherweise Sach- und Personenschäden verursachen kann.

19. Wenn Ihr Gerät nicht mehr ordnungsgemäß funktioniert, Flüssigkeiten oder Gegenstände in das Geräteinnere gelangt sind, oder das Gerät an-

derweitig beschädigt wurde, schalten Sie es sofort aus und trennen es von der Netzsteckdose (sofern es sich um ein aktives Gerät handelt). Dieses

Gerät darf nur von autorisiertem Fachpersonal repariert werden.

20. Verwenden Sie zur Reinigung des Geräts ein trockenes Tuch.

21. Beachten Sie alle in Ihrem Land geltenden Entsorgungsgesetze. Trennen Sie bei der Entsorgung der Verpackung bitte Kunststoff und Papier bzw.

Kartonagen voneinander.

22. Kunststoffbeutel müssen außer Reichweite von Kindern aufbewahrt werden.

23. Sämtliche vom Benutzer vorgenommenen Änderungen und Modikationen, denen die für die Einhaltung der Richtlinien verantwortliche Partei

nicht ausdrücklich zugestimmt hat, können zum Entzug der Betriebserlaubnis für das Gerät führen.

BEI GERÄTEN MIT NETZANSCHLUSS

24. ACHTUNG: Wenn das Netzkabel des Geräts mit einem Schutzkontakt ausgestattet ist, muss es an einer Steckdose mit Schutzleiter angeschlossen

werden. Deaktivieren Sie niemals den Schutzleiter eines Netzkabels.

25. Schalten Sie das Gerät nicht sofort ein, wenn es starken Temperaturschwankungen ausgesetzt war (beispielsweise nach dem Transport). Feuch-

tigkeit und Kondensat könnten das Gerät beschädigen. Schalten Sie das Gerät erst ein, wenn es Zimmertemperatur erreicht hat.

26. Bevor Sie das Gerät an die Steckdose anschließen, prüfen Sie zuerst, ob die Spannung und die Frequenz des Stromnetzes mit den auf dem Gerät

angegebenen Werten übereinstimmen. Verfügt das Gerät über einen Spannungswahlschalter, schließen Sie das Gerät nur an die Steckdose an,

wenn die Gerätewerte mit den Werten des Stromnetzes übereinstimmen. Wenn das mitgelieferte Netzkabel bzw. der mitgelieferte Netzadapter

nicht in Ihre Netzsteckdose passt, wenden Sie sich an Ihren Elektriker.

27. Treten Sie nicht auf das Netzkabel. Sorgen Sie dafür, dass spannungsführende Kabel speziell an der Netzbuchse bzw. am Netzadapter und der

Gerätebuchse nicht geknickt werden.

28. Achten Sie bei der Verkabelung des Geräts immer darauf, dass das Netzkabel bzw. der Netzadapter stets frei zugänglich ist. Trennen Sie das Gerät

stets von der Stromzuführung, wenn das Gerät nicht benutzt wird, oder Sie das Gerät reinigen möchten. Ziehen Sie Netzkabel und Netzadapter immer am

Stecker bzw. am Adapter und nicht am Kabel aus der Steckdose. Berühren Sie Netzkabel und Netzadapter niemals mit nassen Händen.

29. Schalten Sie das Gerät möglichst nicht schnell hintereinander ein und aus, da sonst die Lebensdauer des Geräts beeinträchtigt werden könnte.

30. WICHTIGER HINWEIS: Ersetzen Sie Sicherungen ausschließlich durch Sicherungen des gleichen Typs und Wertes. Sollte eine Sicherung wiederholt

auslösen, wenden Sie sich bitte an ein autorisiertes Servicezentrum.

31. Um das Gerät vollständig vom Stromnetz zu trennen, entfernen Sie das Netzkabel bzw. den Netzadapter aus der Steckdose.

32. Wenn Ihr Gerät mit einem verriegelbaren Netzanschluss bestückt ist, muss der passende Gerätestecker entsperrt werden, bevor er entfernt werden

kann. Das bedeutet aber auch, dass das Gerät durch ein Ziehen am Netzkabel verrutschen und herunterfallen kann, wodurch Personen verletzt werden

und/oder andere Schäden auftreten können. Verlegen Sie Ihre Kabel daher immer sorgfältig.

33. Entfernen Sie Netzkabel und Netzadapter aus der Steckdose bei Gefahr eines Blitzschlags oder wenn Sie das Gerät länger nicht verwenden.

19

DEUTSCHFRANCAIS

ESPAÑOL

ENGLISH

ITALIANO POLSKI

ACHTUNG

Entfernen Sie niemals die Abdeckung, da sonst das Risiko eines elektrischen Schlages besteht. Im Inneren

des Geräts benden sich keine Teile, die vom Bediener repariert oder gewartet werden können. Lassen Sie

Wartung und Reparaturen ausschließlich von qualiziertem Servicepersonal durchführen.

Das gleichseitige Dreieck mit Blitzsymbol warnt vor nichtisolierten, gefährlichen Spannungen im Geräteinneren, die einen elektrischen

Schlag verursachen können.

Das gleichseitige Dreieck mit Ausrufungszeichen kennzeichnet wichtige Bedienungs- und Wartungshinweise.

Warnung! Dieses Symbol kennzeichnet heiße Oberächen. Während des Betriebs können bestimmte Teile des Gehäuses heiß werden.

Berühren oder transportieren Sie das Gerät nach einem Einsatz erst nach einer Abkühlzeit von mindestens 10 Minuten.

Warnung! Dieses Gerät ist für eine Nutzung bis zu einer Höhe von maximal 2000 Metern über dem Meeresspiegel bestimmt.

Warnung! Dieses Gerät ist nicht für den Einsatz in tropischen Klimazonen bestimmt.

ACHTUNG HOHE LAUTSTÄRKEN BEI AUDIOPRODUKTEN!

Dieses Gerät ist für den professionellen Einsatz vorgesehen. Der kommerzielle Betrieb dieses Geräts unterliegt den jeweils gültigen nationalen

Vorschriften und Richtlinien zur Unfallverhütung. Als Hersteller ist Adam Hall gesetzlich verpichtet, Sie ausdrücklich auf mögliche Gesundheitsrisik-

en hinzuweisen. Gehörschäden durch hohe Lautstärken und Dauerbelastung: Bei der Verwendung dieses Produkts können hohe Schalldruckpegel

(SPL) erzeugt werden, die bei Künstlern, Mitarbeitern und Zuschauern zu irreparablen Gehörschäden führen können. Vermeiden Sie länger anhalten-

de Belastung durch hohe Lautstärken über 90 dB.

EINFÜHRUNG

In Deutschland entwickelt, bieten die UHF-Diversity-Funksysteme der U300®-Serie eine überzeugende Audio-Performance. Sie erzielen eine Reichweite

von 100 m bei idealen Bedingungen und sind zum Betrieb in 5 Frequenzbändern erhältlich. Dabei lassen sich jeweils bis zu sechs U300®-Systeme gleich-

zeitig einsetzen. Zur schnellen, problemlosen Funkverbindung dient eine bequeme One-Touch-Synchronisation von Sender und Empfänger über Infrarot,

und die Rauschsperre mit Pilotton gewährleistet eine störungssichere Funktion.

• Lieferbar mit Hand- oder Taschensender

• Infrarot Frequenzsynchronisierung

• Störungsfreier Betrieb durch Pilotton

• 12 Kanäle

• Bis 6 Systeme simultan einsetzbar (bis zu 3 Doppelempfänger)

• Beltpack Sender mit Gain-Schalter und Status-LED

• Dynamisches Handmikrofon mit Status-LED

• U500®-Mikrofonköpfe auch für U300®-Handsender geeignet

• Lange Batterielaufzeit

• Lieferbar in den Frequenzen

470 - 490 MHz (LDU3047)

514 - 542 MHz (LDU3051)

584 - 608 MHz (LDU305)

655 - 679 MHz (LDU306)

823 - 832 MHz and 863–865 MHz (LDU308)

20

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCHENGLISH

Hinweis: Der Einsatz des Funkmikrofon-Systems kann je nach Verwendungsland eine Lizenz erfordern. Für ausführliche Informationen wenden Sie

sich bitte an die zuständige Behörde Ihres Landes.

Pilotton

Die Pilotton-Einrichtung schützt eine drahtlose Mikrofonanlage vor Einstreuungen unerwünschter Signale, beispielsweise die von anderen Funkanla-

gen. Der Sender fügt dem eigentlich zu übertragenden Signal ein zweites, unhörbares Signal, den Pilotton, hinzu. Der Empfänger identiziert diesen

als den übereinstimmenden Pilotton und gibt das dazugehörige Signal frei. Signale ohne übereinstimmenden Pilotton bleiben stumm geschaltet.

Lieferumfang

LDU30xHHD: Empfänger plus Handsender mit dynamischer Kapsel (cardioid), Netzteil, 2x AA Batterien, Audiokabel, Anleitung

LDU30xBPH: Empfänger plus Taschensender und Headset (schwarz), Netzteil, 2x AA Batterien, Audiokabel, Anleitung

LDU30xBPG: Empfänger plus Taschensender und Gitarrenkabel, Netzteil, 2x AA Batterien, Audiokabel, Anleitung

LDU30xBPL: Empfänger plus Taschensender und Lavalier-Mikrofon, Netzteil, 2x AA Batterien, Audiokabel, Anleitung

LDU30xBPW: Empfänger plus Taschensender und Clip-Mikrofon für Blasinstrumente, Netzteil, 2x AA Batterien, Audiokabel, Anleitung

LDU30xHHD2: Doppelempfänger plus 2 Handsender mit dynamischer Kapsel (cardioid), Netzteil, 4x AA Batterien, 2x Audiokabel, Rack-Kit, Anleitung

LDU30xBPH2: Doppelempfänger plus 2 Taschensender und 2 Headsets (schwarz), Netzteil, 4x AA Batterien, 2x Audiokabel, Rack-Kit, Anleitung

ANSCHLÜSSE, BEDIEN- UND ANZEIGEELEMENTE

EMPFÄNGER

9

1

22

33 77

55

66

44

9

88

9

1 2

3 7 5

6

4

9

8

La pagina si sta caricando...

LD Systems U305.1 R2 Manuale del proprietario

Questo manuale è adatto anche per

LD Systems U305.1 R2 Manuale del proprietario

in altre lingue

Documenti correlati

Altri documenti