ESAB Mig 5000i Manuale utente

Categoria
Sistema di saldatura
Tipo
Manuale utente

Questo manuale è adatto anche per

Valid for serial no. 640--xxx--xxxx0459 290 227 070920
Mig 5000i
Aristot
400 V version
Instruction manual Èíñòðóêöèÿ ïî ýêñïëóàòàöèè
-- 2 --
Rights reserved to alter specifications without notice.
Îñòàâëÿåì çà ñîáîé ïðàâî èçìåíÿòü ñïåöèôèêàöèþ áåç ïðåäóïðåæäåíèÿ.
Ðóññêèé 3...............................................
ENGLISH 16..............................................
Ðóññêèé
TOCr
-- 3 --
1 ÒÅÕÍÈÊÀ ÁÅÇÎÏÀÑÍÎÑÒÈ 4........................................
2 ÂÂÅÄÅÍÈÅ 5.......................................................
2.1 Îáîðóäîâàíèå 5...........................................................
3 ÒÅÕÍÈ×ÅÑÊÈÅ ÕÀÐÀÊÒÅÐÈÑÒÈÊÈ 6................................
ÑÒÀÍÎÂÊÀ 7.......................................................
4.1 Èíñòðóêöèè ïî ïîäúåìó 8..................................................
4.2 Ðàçìåùåíèå 8.............................................................
4.3 Ñåòü ýëåêòðîïèòàíèÿ 8.....................................................
4.4 Íàãðóçî÷íûé ðåçèñòîð 9...................................................
4.5 Ïîäêëþ÷åíèå íåñêîëüêèõ áëîêîâ ïîäà÷è ïðîâîëîêè 9.......................
5 ÏÎÐßÄÎÊ ÐÀÁÎÒÛ 11...............................................
5.1 Ñîåäèíåíèÿ è óñòðîéñòâà óïðàâëåíèÿ 11.....................................
5.2 Âêëþ÷åíèå èñòî÷íèêà ïèòàíèÿ 12............................................
5.3 Óïðàâëåíèå âåíòèëÿòîðàìè 12...............................................
5.4 Çàùèòà îò ïåðåãðåâà 12.....................................................
5.5 Áëîê îõëàæäåíèÿ 12........................................................
5.6 Ïóëüò äèñòàíöèîííîãî óïðàâëåíèÿ 13........................................
6 ÒÅÕÍÈ×ÅÑÊÎÅ ÎÁÑËÓÆÈÂÀÍÈÅ 13.................................
6.1 Åæåäíåâíî 13..............................................................
6.2 Ïðè íåîáõîäèìîñòè 14......................................................
6.3 Åæåãîäíî 14................................................................
7 ÂÛßÂËÅÍÈÅ ÍÅÈÑÏÐÀÂÍÎÑÒÅÉ 15.................................
8 ÈÍÔÎÐÌÀÖÈß ÄËß ÇÀÊÀÇÀ ÇÀÏÀÑÍÛÕ ×ÀÑÒÅÉ 15.................
ÑÕÅÌÀ 30..............................................................
ÍÎÌÅÐ ÇÀÊÀÇÀ 33.....................................................
ÑÏÈÑÎÊ ÇÀÏÀÑÍÛÕ ×ÀÑÒÅÉ 34........................................
ÄÎÏÎËÍÈÒÅËÜÍÛÅ ÏÐÈÍÀÄËÅÆÍÎÑÒÈ 35...........................
ba37d1ra -- 4 --
1 ÒÅÕÍÈÊÀ ÁÅÇÎÏÀÑÍÎÑÒÈ
Ïîëüçîâàòåëè ñâàðî÷íîãî îáîðóäîâàíèÿ ESAB îòâå÷àþò çà âûïîëíåíèå ïðàâèë òåõíèê è
áåçîïàñíîñòè ëèöàìè, ðàáîòàþùèìè íà îáîðóäîâàíèè è ðÿäîì ñ íèì. Ïðàâèëà òåõíèêè
áåçîïàñíîñòè äîëæíû îòâå÷àòü òðåáîâàíèÿì ê áåçîïàñíîé ýêñïëóàòàöèè ñâàðî÷íîãî
îáîðóäîâàíèÿ ýòîãî òèïà. Ïîìèìî ñòàíäàðòíûõ ïðàâèë òåõíèêè áåçîïàñíîñòè è îõðàíû
òðóäà íà ðàá î÷åì ìåñòå ðåêîìåíäóåòñÿ ñëåäóþùåå.
Âñå ðàáîòû äîëæíû âûïîëíÿòüñÿ ïîäãîòîâëåííûìè ëèöàìè, çíàêîìûìè ñ ýêñïëóàòàöèåé
ñâàðî÷íîãî îáîðóäîâàíèÿ. Íåïðàâèëüíàÿ ýêñïëóàòàöèÿ îáîðóäîâàíèÿ ìîæåò âûçâàòü
îïàñíûì ñèòóàöèè, ïðèâîäÿùèå ê òðàâìèðîâàíèþ ïåðñîíàëà è ïîâðåæäåíèþ
îáîðóäîâàíèÿ.
1. Bñå ëèöà, èñïîëüçóþùèå ñâàðî÷íîå îáîðóäîâàíèå, äîëæíû çíàòü:
S èíñòðóêöèè ïî ýêñïëóàòàöèè
S ðàñïîëîæåíèå îðãàíîâ àâàðèéíîãî îñòàíîâà
S íàçíà÷åíèå îáîðóäîâàíèÿ
S ïðàâèëà òåõíèêè áåçîïàñíîñòè
S òåõíîëîãèþ ñâàðêè
2. Îïåðàòîð îáåñïå÷èâàåò:
S óäà ëåíèå ïîñòîðîííèõ ëèö èç ðàá î÷åé çîíû îáîðóäîâàíèÿ ïðè åãî çàïóñêå
S çàùèòó âñåõ ëèö îò â îçäåéñòâèÿ ñâàðî÷íîé äóãè
3. Ðàáî÷åå ìåñòî äîëæíî:
S îòâå÷àòü óñëîâèÿì ýêñïëóàòàöèè
S íå èìåòü ñêâîçíÿêîâ
4. Ñðåäñòâà çàùèòû ïåðñîíàëà
S Âî âñåõ ñëó÷àÿõ ðåêîìåíäóåòñÿ èñïîëüçîâàòü èíäèâèäóàëüíûå ñðåäñòâà çàùèòû,
íàïðèìåð, çàùèòíûå î÷êè, îãíåñòîéêóþ ñïåöîäåæäó è çàùèòíûå ðóêàâèöû.
S Ïðè ñâàðêå çàïðåùàåòñÿ íîñèòü ñâîáîäíóþ îäåæäó, óêðàøåíèÿ è ò.ä., íàïðèìåð,
øàðôû, áðàñëåòû, êîëüöà, êîòîðûå ìîãóò ïîïàñòü â ñâàðî÷íîå îáîðóäîâàíèå èëè
âûçâàò ü îæîãè.
5. Îáùèå ìåðû ïðåäîñòîðîæíîñòè
S Ïðîâåðüòå íàäåæíîñòü ïîäêëþ÷åíèÿ îáðàòíîãî êàáåëÿ.
S Ðàáîòû íà îáîðóäîâàíèè ñ âûñîêèì íàïðÿæåíèåì äîëæíû ïðîèçâîäèòüñÿ
òîëüêî êâàëèôèöèðîâàííûì ýëåêòðèêîì.
S Â ïðåäåëàõ äîñòóïà äîëæíû íàõîäèòüñÿ ñîîòâåòñòâóþùèå ñðåäñòâà
ïîæàðîòóøåíèÿ, èìåþùèå ÿñíóþ ìàðêèðîâêó.
S Çàïðåù àåòñÿ ïðîâîäèòü ñìàçêó è òåõíè÷åñêîå îáñëóæèâàíèå îáîðóäîâàíèå âî
âðåìÿ ýêñïëóàòàöèè.
Êîìïàíèÿ ESAB ãîòîâà ïðåäîñòàâèòü âàì âñå çàùèòíîå ñíàðÿæåíèå è
ïðèíàäëåæíîñòè, íå îáõîäèìûå äëÿ âûïîëíåíèÿ ñâàðî÷íûõ ð àáîò.
ÂÍÈÌÀÍÈÅ!
Ïåðåä íà÷àëîì ìîíòàæà è ýêñïëóàòàöèè âíèìàòåëüíî
èçó÷èòå ñîîòâåòñòâóþùèå èíñòðóêöèè.
Çàïðåùàåòñÿ èñïîëüçîâàòü èñòî÷íèê ïèòàíèÿ äëÿ îòòàèâàíèÿ ò ðóá.
ÂÍÈÌÀÍÈÅ!
Äàííîå èçäåëèå ïðåäíàçíà÷åíî òîëüêî äëÿ äóãîâîé ñâàðêè.
RU
ba37d1ra -- 5 --
Ïåðåä íà÷àëîì ìîíòàæà è ýêñïëóàòàöèè âíèìàòåëüíî èçó÷èòå ñîîòâåòñòâóþùèå èíñòðóêöèè.
ÇÀÙÈÒÈÒÅ ÑÅÁß È ÄÐÓÃÈÕ!
ÎÑ ÒÎÐÎÆÍÎ!
ÄÓÃÎÂÀß ÑÂÀÐÊÀ È ÐÅÇÊÀ ÎÏÀÑÍÛ ÊÀÊ ÄËß ÈÑÏÎËÍÈÒÅËß ÐÀÁÎÒ, ÒÀÊ È ÄËß
ÏÎÑÒ ÎÐÎÍÍÈÕ ËÈÖ. ÒÐÅÁÓÉÒÅ ÑÎÁËÞÄÅÍÈÅ
ÂÑÅÕ ÏÐÀÂÈË ÁÅÇÎÏÀÑÍÎÑÒÈ,
ÄÅÉÑÒ
ÂÓÞÙÈÕ ÍÀ ÎÁÚÅÊÒÅ, ÊÎÒÎÐÛÅ ÄÎËÆÍÛ Ó×ÈÒÛÂÀÒÜ ÑÂÅÄÅÍÈß ÎÁ ÎÏÀÑÍÎÑÒßÕ,
ÏÐÅÄÑÒÀ
ÂËÅÍÍÛÅ ÈÇÃÎÒÎÂÈÒÅËÅÌ ÑÂÀÐÎ×ÍÎÃÎ ÎÁÎÐÓÄ ÎÂÀÍÈß.
ÎÏÀÑÍÎÑÒÜ ÑÌÅÐÒÅËÜÍÎÃÎ ÏÎÐÀÆÅÍÈß ÝËÅÊÒÐÈ×ÅÑÊÈÌ ÒÎÊÎÌ.
S Ñâàðî÷íûé àãðåãàò óñòàíàâëèâàåòñÿ è çàçåìëÿåòñÿ â ñîîòâåòñòâèè ñ äåéñòâóþùèìè íîðìàìè è
ïðàâèëàìè.
S Íå äîïóñêàéòå ê îíò àêòà íàõîäÿùèõñ ÿ ïîä íàïðÿæåíèåì äåòàëåé è ýëåêòðîäîâ ñ íåçàùèùåííûìè
÷àñòÿìèòåëàîêðûìèðóêàâèöàìèèìîêðîéîäåæäîé.
S Îáåñïå÷üòå ýëåêòðè÷åñêóþ èçîëÿöèþ îò çåìëè è ñâàðèâàåìûõ äåòàëåé.
S Îáåñïå÷üòå ñîáëþäåíèå áåçîïàñíûõ ðàáî÷èõ ðàññò îÿíèé.
ÄÛÌÛ È ÃÀÇÛ ìîãóò áûòü îïàñíû äëÿ ÷åëîâåêà
S Èñêëþ÷èòå âîçìî æíîñòü âîçäåéñòâèÿ äûìîâ.
S Äëÿ èñêëþ÷åíèÿ âäûõàíèÿ äûìîâ âî âðåìÿ ñâàðêè îðãàíèçóåòñÿ îáùàÿ âåíòèëÿöèÿ ïîìåùåíèÿ, à
òàêæåâûòÿæíàÿâåíòèëÿöèÿèççîíûñâàðêè.
ÈÇËÓ×ÅÍÈÅ ÄÓÃÈ âûçûâàåò ïîðàæ åíèå ãëàç è îæîãè êîæè.
S Çàùèòèòå ãëàçà è êîæó. Äëÿ ýòîãî èñïîëüçóéòå çàùèòíûå ùèòêè, öâåòíûå ëèíçû è çàùèòíóþ
ñïåöîäåæäó.
S Äëÿ çàùèòû ïîñò îðîííèõ ëèö ïðèìåíÿþòñÿ çàùèòíûå ýêðàíû èëè çàíàâåñè.
ÏÎÆÀÐÎÎÏÀÑÍÎÑÒÜ
S Èñêðû (áðûçãè ìåòàëëà) ìîãóò âûçâàòü ïîæàð. Óáåäèòåñü â îòñóòñòâèè ãîðþ÷èõ ìàòåðèàëîâ
ïîáëèçîñòè îò ìåñòà ñâàðêè.
ØÓÌ - ×ðåçìåðíûé øóì ìîæåò ïðèâåñòè ê ïîâðåæäåíèþ îðãàíîâ ñëóõà
S Ïðèìèòå ìåðû äëÿ çàùèòû ñëóõà. Èñïîëüçóéòå çàòû÷êè äëÿ óøåé èëè äðóãèå ñðåäñòâà çàùèòû
ñëóõà.
S Ïðåäóïðåäèòå ïîñòîðîííèõ ëèö îá îïàñíîñòè.
ÍÅÈÑÏÐÀÂÍÎÑÒÈ -- Ïðè íåèñïðàâíîñòè îáðàòèòåñü ê ñïåöèàëèñòàì ïî ñâàðî÷íîìó
îáîðóäîâàíèþ
2 ÂÂÅÄÅÍÈÅ
Áëîê Mig 5000i ïðåäñòàâëÿåò ñîáîé èñòî÷íèê ïèòàíèÿ äëÿ ýëåêòðîäóãîâîé
ñâàðêè â ñðåäå çàùèòíîãî ãàçà îáû÷íîé ñâàðî÷íîé ïðîâîëîêîé (MIG), ëèáî
áåç ãàçà ñ èñïîëüçîâàíèåì ïðîâîëîêè ñ ôëþñîì (MAG), íî ìîæåò áûòü òàêæå
èñïîëüçîâàí äëÿ ñâàðêè ïîêðûòûì ýëåêòðîäîì (MMA).
Ïîñòàâëÿþòñÿ äâà âàðèàíòà ýòîãî èñòî÷íèêà ïèòàíèÿ:
S Mig 5000i áåç áëîêà îõëàæäåíèÿ
S Mig 5000i ñ áëîê îì îõëàæäåíèÿ
Ïðèìå÷àíèå:  äàííîì Ðóêîâîäñòâå îïèñûâàåòñÿ Mig 5000i ñ áëîêîì
îõëàæäåíèÿ.
Èñòî÷íèê ïèòàíèÿ ïðåäíàçíà÷åí äëÿ èñïîëüçîâàíèÿ ñ áëîêàìè ïîäà÷è
ïðîâîëîêè Feed 3004 èëè Feed 4804.
Âñå óñòàâêè çàäàþòñÿ â áëîêå ïîäà÷è ïðîâîëîêè èëè â áëîêå óïðàâëåíèÿ U8.
Àêñåññóàð² îò ä ëÿ èçäåëÿ ìîæíî íàéòè íà ñòðíèöå 35.
2.1 Îáîðóäîâàíèå
Èñòî÷íèê ïèòàíèÿ ïîñòàâëÿåòñÿ â êîìïëåêòå ñ íàãðóçî÷íûì ðåçèñòîðîì, 5m
îáðàòíîãî êàáåëÿ è Ðóêîâîäñòâîì ïî ýêñïëóàòàöèè.
RU
ba37d1ra -- 6 --
3 ÒÅÕÍÈ×ÅÑÊÈÅ ÕÀÐÀÊÒÅÐÈÑÒÈÊÈ
Mig 5000i
Íàïðÿæåíèå ñåòè ïèòàíèÿ 400 A, ±10%, 3 50/60 Ãö
Ïåðâè÷íûé òîê
I
ìàêñ.
MIG/MAG
I
max
MMA
39 À
40 À
Ïîòðåáëÿåìàÿ ìîùíîñòü õîëîñòîãî õîäà â ðåæèìå
ýíåðãîñáåðåæåíèÿ, 6,5 ìèí ï îñëå ñâ àðêè
50 Âò
Äèàïàçîí íàïðÿæåíèÿ/òîêà
MIG/MAG
MIG/MAG, Ïàíåëü óïðàâëåíèÿ M2)
MMA
8-60 Â / 16-500 À
8-42 V
16-500 À
Äîïóñòèìàÿ íàãðóçêà ïðè MIG/MAG
êîýôôèöèåíò íàãðóçêè ðàáî÷åãî öèêëà 60 %
êîýôôèöèåíò íàãðóçêè ðàáî÷åãî öèêëà 100%
500 À / 39 Â
400 À / 34 Â
Äîïóñòèìàÿ íàãðóçêà ïðè äóãîâîé ñâàðêå ïîêðûòûì
ýëåêòðîäîì MMA
êîýôôèöèåíò íàãðóçêè ðàáî÷åãî öèêëà 60 %
êîýôôèöèåíò íàãðóçêè ðàáî÷åãî öèêëà 100%
500 À / 40 Â
400 À / 36 Â
Êîýôôèöèåíò ìîùíîñòè ïðè ìàêñèìàëüíîì òîêå 0.85
Êïä ïðè ìàêñèìàëüíîì òîêå 86 %
Íàïðÿæåíèå õîëîñòîãî õîäà
MIG/MAG
MMA
72 -88 Â
68 -80 Â
Ðàáî÷àÿ òåìïåðàòóðà îò -10 äî +40˚C
Òåìïåðàòóðà ïðè òðàíñïîðòèðîâêå îò -25 äî +55˚C
Ãàáàðèòíûå ðàçìåðû, ÄxØ
ñ á ëîêîì îõëàæäåíèÿ
625 x 394 x 496 ìì
625 x 394 x 776 ìì
Íåïðåðûâíî äåéñòâóþùåå ñðåäíåâçâåøåííîå
çâóêîâîå äàâëåíèå
<70 äÁ (A)
Ìàññà
ñ á ëîêîì îõëàæäåíèÿ
66 êã
86 êã
Ê ëàññ èçîëÿöèè ò ðàíñôîðìàòîðà H
Ê ëàññ çàùèòû êîðïóñà IP 23
Êëàññ ïðèìåíåíèÿ
RU
ba37d1ra -- 7 --
Áëîê îõëàæäåíèÿ
Ìîùíîñòü îõëàæäåíèÿ 2,0 kW ïðè ðàçíèöå òåìïåðàòóð 40˚
ðàñõîäå 1,0 ë/ìèí
Îõëàæäàþùàÿ æèäêîñòü 50% âîäà / 50% ìîíîýòèëåíãëèêîëÿ
Êîëè÷åñòâî îõëàæäàþùåé æèäêîñòè 5,5 ë
Ìàêñèìàëüíûé ðàñõîä âîäû 2,0 ë/ìèí
Ìàêñèìàëüíîå êîëè÷åñòâî ñâàðî÷íûõ
ïèñòîëåòîâ / ãîðåëîê ñ âîäÿíûì
îõëàæäåíèåì, êîòîðîå ìîæåò áûòü
ïîäñîåäèíåíî
äâà ñâàðî÷íûõ ïèñòîëåòà MIG óãîâàÿ
ñâàðêà ïëàâÿùèìñÿ ìåòà ëëè÷åñêèì
ýëåêòðîäîì â ñðåäå èíåðòíîãî ãàçà) èëè
îäíà ñâàðî÷íàÿ ãîðåëêà TIG (äóãîâàÿ ñâàðêà
âîëüôðàìîâûì ýëåêòðîäîì â ñðåäå
èíåðòíîãî ãàçà) è îäèí ñâàðî÷íûé ïèñòîëåò
MIG
Ðàáî÷èé öèêë
Ðàáî÷èé öèêë ïðåäñòàâëÿåò ñîáîé äîëþ %%) äåñÿòèìèíóòíîãî èíòåðâàëà, â òå÷åíèå
êîòîðîé ìîæíî ïðîèçâîäèòü ñâàðêó ïðè îïðåäåëåííîé íàãðóçêå áåç ïåðåãðóçêè.
Êëàññ êîæóõà
Íîðìû IP óêàçûâàþò êëàññ êîæóõà, ò.å., ñòåïåíü çàùèòû îò ïðîíèêíîâåíèÿ òâåðäûõ
îáúåêòîâ è âîäû. Îáîðóäîâàíèå ñ ìàðêèðîâêîé IP 23 ïðåäíàçíà÷åíî äëÿ íàðóæíîé è
âíóòðåííåé óñòàíîâêè.
Ê ëàññ çîíû óñòàíîâêè
Ýòîò ñèìâîë îçíà÷àåò, ÷òî èñòî÷íèê ïèòàíèÿ ïðåäíàçíà÷åí äëÿ èñïîëüçîâàíèÿ â çîíàõ
ñ ïîâûøåííîé îïàñíîñòüþ ïîðàæåíèÿ ýëåêòðî òîê îì.
ÑÒÀÍÎÂÊÀ
Ââîä â ýêñïëóàòàöèþ äîëæåí ïðîèçâîäèòüñÿ êâàëèôèöèðîâàííûì
ñïåöèàëèñòîì.
ÂÍÈÌÀÍÈÅ!
Íàñòîÿùåå èçäåëèå ïðåäíàçíà÷åíî äëÿ ïðîìûøëåííîãî èñïîëüçîâàíèÿ. Ïðè
èñïîëüçîâàíèè â áûòîâûõ óñëîâèÿõ îíî ìîæåò ñîçäàâàòü ðàäèî÷àñòîòíûå ïîìåõè.
Ïîëüçîâàòåëü îòâå÷àåò çà ïðèíÿòèå ñîîòâåòñòâóþùèõ ìåð ïðåäîñòîðîæíîñòè.
Âíèìàíèå!
Ïðèñîåäèíèòü èñòî÷íèê ïèòàíèÿ ê ýëåêòðè÷åñêîé ñåòè ñ ïîëíûì ñîïðîòèâëåíèåì 0.190 Îì
èëè íèæå. Åñëè ïîëíîå ñîïðîòèâëåíèå ñåòè âûøå, âîçíèêàåò ðèñê ìèãàíèÿ îñâåòèòåëüíûõ
ïðèáîðîâ.
RU
ba37d1ra -- 8 --
4.1 Èíñòðóêöèè ïî ïîäúåìó
Ñ èñòî÷íèêîì ïèòàíèÿ Ñ òåëåæêîé è èñòî÷íèêîì
ïèòàíèÿ
Ñòåëåæêîé2èèñòî÷íèêîì
ïèòàíèÿ
4.2 Ðàçìåùåíèå
Ðàçìåñòèòå ñâàðî÷íûé èñòî÷íèê ïèòàíèÿ òàêèì îáðàçîì, ÷òîáû åãî
âîçäóõîçàáîðíûå è âûïóñêíûå îòâåðñòèÿ íå áûëè çàãðàæäåíû.
4.3 Ñåòü ýëåêòðîïèòàíèÿ
Óáåäèòåñü â òîì, ÷òî áëîê ïîäêëþ÷åí ê ñåòè ýëåêòðîïèòàíèÿ ñ
òðåáóåìûì íàïðÿæåíèåì è çàùèùåí ïðåäîõðàíèòåëÿìè
òðåáóåìîãî íîìèíà ëà. Íåîáõîäèìî îáåñïå÷èòü çàùèòíîå
çàçåìëåíèå â ñîîòâåòñòâèè ñ äåéñòâóþùèìè íîðìàìè.
Ïàñïîðòíàÿ òàáëè÷êà ñ ïàðàìåòðàìè ñåòè ýëåêòðîïèòàíèÿ.
Ðåêîìåíäóåìûå íîìèíàëû ïðåäîõðàíèòåëåé è ìèíèìàëüíàÿ ïëîùàäü ïîïåðå÷íîãî
ñå÷åíèÿ êàáåëåé
Mig 5000i 400 Â 3μ 50 Ãö
Íàïðÿæåíèå ñåòè ïèòàíèÿ 400 Â
Ïëîùà äü ïîïåðå÷íîãî ñå÷åíèÿ ñèëîâîãî êàáåëÿ
ïèòàíèÿ, ìì
2
4G6
Ôàçíûé òîê, I ñðåäíåêâàäðàòè÷íîå äåéñòâóþùåå
çíà÷åíèå
31 À
Ïðåäîõðàíèòåëü
Óñòîé÷èâûé ê ïåðåíàïðÿæåíèÿì
Òèï C, ìèíèàòþðíûé âûêëþ÷àòåëü
35 À
40 À
Ïðèìå÷àíèå:
Ïðèâåäåííûå âûøå çíà÷åíèÿ ïëîùàäè ïîïåðå÷íîãî ñå÷åíèÿ ñèëîâûõ êàáåëåé è íîìèíàëû
ïðåäîõðàíèòåëåé ñîîòâåòñòâóþò øâåäñêèì íîðìàì. Îíè ìîãóò îêàçàòüñÿ íåïðèìåíèìû â
äðóãèõ ñòðàíàõ: óáåäèòåñü â òîì, ÷òî ïëîùàäü ïîïåðå÷íîãî ñå÷åíèÿ êàáåëåé è íîìèíàëû
ïðåäîõðàíèòåëåé ñîîòâåòñòâóþò ñîîòâåòñòâóþùèì íàöèîíàëüíûì íîðìàì.
RU
ba37d1ra -- 9 --
4.4 Íàãðóçî÷íûé ðåçèñòîð
×òîáû èçáåæàòü âîçíèêíîâåíèÿ ïîìåõ, êîíöû
øèíû öåïè óïðàâëåíèÿ (CAN) äîëæíû áûòü
ñíàáæåíû íàãðóçî÷íûìè ðåçèñòîðàìè.
Îäèí êîíåö øèíû CAN ïîäêëþ÷åí ê ïàíåëè
óïðàâëåíèÿ, êîòîðàÿ ñíàáæå íà îáÿçàòåëüíûì
íàãðóçî÷íûì ðåçèñòîðîì. Äðóãîé êîíåö
ïîäê ëþ÷åí ê èñòî÷íèêó ïèòàíèÿ è äîëæåí áûòü
ñíàáæ åí íàãðóçî÷íûì ðåçèñòîðîì, êàê ïîêàçàíî íà ðèñóíêå
ñïðàâà.
4.5 Ïîäêëþ÷åíèå íåñêîëüêèõ áëîêîâ ïîäà÷è ïðîâîëîêè
ÏðèïîìîùèáëîêàóïðàâëåíèÿU8èáëîêîâïîäà÷èïðîâîëîêèáåçïàíåëè
óïðàâëåíèÿ ìîæíî óïðàâëÿòü îò îäíîãî èñòî÷íèêà ýëåêòðîïèòàíèÿ áëîêàìè
ïîäà÷è ïðîâîëîêè äî 4 øòóê.
Ìîæíî âûáðàòü ëþáîé âàðèàíò èç ñëåäóþùèõ ñîåäèíåíèé:
S 1 ñâàðî÷íàÿ ãîðåëêà TIG è 1 ñâàðî÷íûé ïèñòîëåò M IG (òðåáóåòñÿ
óíèâåðñà ëüíûé èñòî÷íèê ýëåêòðîïèòàíèÿ)
S 2 ñâàðî÷íûõ ïèñòîëåòà MIG
S 1 ñâàðî÷íàÿ ãîðåëêà TIG è 3 ñâàðî÷íûõ ïèñòîëåòà MIG (òðåáóåòñÿ
óíèâåðñà ëüíûé èñòî÷íèê ýëåêòðîïèòàíèÿ)
S 4 ñâàðî÷íûõ ïèñòîëåòà MIG
Ïðè âûïîëíåíèè ñâàðêè ïðè ïîìîùè ñâàðî÷íûõ ïèñòîëåòîâ MIG ñ âîäÿíûì
îõëàæäåíèåì íà âñåõ òðåõ áëîêàõ ï îäà÷è ï ðîâîëîêè, äëÿ 2 äîïîëíèòåëüíûõ
ñâàðî÷íûõ ïèñòîëåòîâ ðåêîìåíäóåòñÿ ïîäñîåäèíèòü îòäåëüíûé óçåë
îõëàæäåíèÿ.
Ìû ðåêîìåíäóåì ïîäñîåäèíÿòü ñâàðî÷íûå ïèñòîëåòû ïàðàëëåëüíî.
RU
ba37d1ra -- 1 0 --
Äâà áëîêà ïîäà÷è ïðîâîëîêè
Ïðè ñîåäèíåíèè äâóõ áëîêîâ ïîäà÷è ïðîâîëîêè íåîáõîäèìî èìåòü
ñîåäèíèòåëüíûé êîìïëåêò, ñì. âñïîìîãàòåëüíîå îáîðóäîâàíèå íà ñòð. 35.
×åòûðå áëîêà ïîäà÷è ïðîâîëîêè
Ïðè ñîåäèíåíèè ÷åòûðåõ áëîêîâ ïîäà÷è ïðîâîëîêè íåîáõîäèìî èìåòü
ñîåäèíèòåëüíûé êîìïëåêò íà òðè áëîêà è äîïîëíèòåëüíûé óçåë îõëàæäåíèÿ,
ñì. âñïîìîãàòåëüíîå îáîðóäîâàíèå íà ñòð. 35.
RU
ba37d1ra -- 1 1 --
5 ÏÎÐßÄÎÊ ÐÀÁÎÒÛ
Îáùèå ïðàâèëà òåõíèêè áåçîïàñíîñòè ïðè ðàáîòå ñ îáîðóäîâàíèåì
ïðèâîäÿòñÿ íà ñòð. 4. Ïðî÷òèòå èõ äî èñïîëüçîâàíèÿ îáîðóäîâàíèÿ!
5.1 Ñîåäèíåíèÿ è óñòðîéñòâà óïðàâëåíèÿ
1 Ñîåäèíèòåëü äëÿ ïîäà÷è
îõëàæäàþùåé âîäû. Â äàííîé
ìîäåëè íå èñïîëüçóåòñÿ.
8 Áåëàÿ èíäèêàòîðíàÿ ëàìïà - Èñòî÷íèê
ïèòàíèÿ ÂÊË. (ON)
2 Ñîåäèíèòåëü äëÿ ïîäà÷è
îõëàæäàþùåé âîäû. Â äàííîé
ìîäåëè íå èñïîëüçóåòñÿ.
9 Îðàíæåâàÿ èíäèêàòîðíàÿ ëàìïà -
Ïåðåãðåâ
3 Çàëèâíîå î òâåðñòèå äëÿ îõëàæäàþùåé
âîäû
10 Ñîåäèíèòåëü äëÿ êà áåëÿ óïðàâëåíèÿ ê
áëîêó ïîäà÷è ïðîâîëîêè èëè
íàãðóçî÷íîìó ðåçèñòîðó
4 Ñîåäèíèòåëü äëÿ ê àáåëÿ ñâàðî÷íîãî
òîêà (+) (ñâàðêà MMA)
11 Ñîåäèíèòåëü äëÿ êàáåëÿ ñâàðî÷íîãî
òîêà ê áëîêó ïîäà÷è ïðîâîëîêè
5 Ñîåäèíèòåëü ïóëüòà äèñòàíöèîííîãî
óïðàâëåíèÿ
12 Ïîäêëþ÷åíèå îõëàæäàþùåé âîäû ê
áëîêó ïîäà÷è ïðîâîëîêè - ÃÎËÓÁÎÉ
6 Ñîåäèíèòåëü îáðàòíîãî êàá åëÿ (-) 13 Ñîåäèíèòåëü äëÿ ïîäà÷è
î õëàæäàþùåé âîäû îò áëîêà ïîäà÷è
ïðîâîëîêè - ÊÐÀÑÍÛÉ
7 Ñåòåâîé âûêëþ÷àòåëü, 0 / 1 / ÏÓÑÊ
RU
ba37d1ra -- 1 2 --
5.2 Âêëþ÷åíèå èñòî÷íèêà ïèòàíèÿ
Âêëþ÷èòå ïèòàíèå, ïîâåðíóâ âûêëþ÷àòåëü (7) â ïîëîæåíèå START (ÏÓÑÊ).
Îòïóñòèòå âûê ëþ÷àòåëü, è îí âåðíåòñÿ â ïîëîæåíèå «1».
Åñëè òðåáóåòñÿ âðåìåííî îòêëþ÷èòü ïèòàíèå â ïðîöåññå ñâàðêè, à çàòåì
âíîâü âêëþ÷èòü åãî, òî èñòî÷íèê ïèòàíèÿ áóäåò îñòàâàòüñÿ îáåñòî÷åííûì äî
òåõ ïîð, ïîêà âûêëþ÷àòåëü ñíîâà íå áóäåò âðó÷íóþ ïîâåðíóò â ïîëîæåíèå
ST ART (ÏÓ ÑÊ).
×òîáû âûê ëþ÷èòü èñòî÷íèê ïèòàíèÿ, ïîâåðíèòå âûêëþ÷àòåëü â ïîëîæåíèå «0».
Åñëè èñòî÷íèê ïèòàíèÿ îòêëþ÷èòñÿ â ðåçóëüòàòå ñáîÿ ïî ïèòàíèþ èëè
îáû÷íîãî âûêëþ÷åíèÿ âðó÷íóþ, òî ïàðàìåòðû ñâàðêè áóäóò ñîõðàíåíû, òàê
÷òî èõ ìîæíî áóäåò èñïîëüçîâàòü ïðè ñëåäóþùåì âêëþ÷åíèè óñòðîéñòâà.
5.3 Óïðàâëåíèå âåíòèëÿòîðàìè
Âåíòèëÿòîðû èñòî÷íèêà ïèòàíèÿ ïðîäîëæàþò ðàáîòàòü â òå÷åíèå 6,5 ìèí
ïîñëå ïðåêðàùåíèÿ ñâàðêè, è áëîê ïåðåêëþ÷àåòñÿ â ðåæèì
ýíåðãîñáåðåæåíèÿ. Ïðè âîçîáíîâëåíèè ñâàðêè âåíòèëÿòîðû âíîâü íà÷íóò
ðàáîòàòü.
Âåíòèëÿòîðû ðàáîòàþò íà ïîíèæåííûõ îáîðîòàõ ïðè ñâàðî÷íûõ òîêàõ äî 180 A
èíàïîëíûõîáîðîòàõïðèáîëüøèõòîêàõ.
5.4 Çàùèòà îò ïåðåãðåâà
Èñòî÷íèê ïèòàíèÿ èìååò òðè öåïè çàùèòû îò òåïëîâîé ïåðåãðóçêè, êîòîðûå
ñðàáàòûâàþò ïðè íåäîïóñòèìîì âîçðàñòàíèè âíóòðåííåé òåìïåðàòóðû. Ïðè
ýòîì ïðåêðàùàåòñÿ ïîäà÷à ñâàðî÷íîãî òîêà è çàãîðàåòñÿ îðàíæ åâàÿ
èíäèêàòîðíàÿ ëàìïà íà ëèöåâîé ïàíåëè óñòðîéñòâà. Êîãäà òåìïåðàò óðà
ñíèçèò ñÿ, ðåëå âíîâü àâòîìàòè÷åñêè âêëþ÷àòñÿ.
5.5 Áëîê îõëàæäåíèÿ
Ïîðÿäîê ðàáîòû ïðè ñâàðêå
×òîáû íà÷àòü ñâàðêó, ñâàðùèê íàæèìàåò ïóñêîâîé âûêëþ÷àòåëü ñâàðî÷íîãî
ïèñòîëåòà. Èñòî÷íèê ïèòàíèÿ âêëþ÷àåò áëîê ïîäà÷è ïðîâîëîêè è í àñîñ
ïîäà÷è îõëàæäàþùåé âîäû.
×òîáû îñòàíîâèòü ïðîöåññ ñâàðêè, ñâàðùèê îòïóñêàåò ïóñêîâîé âûêëþ÷àòåëü
ñâàðî÷íîãî ïèñòîëåòà. Ïîäà÷à ñâàðî÷íîãî òîêà ïðåêðàùàåòñÿ, îäíàêî íàñîñ
ïîäà÷è îõëàæäàþùåé âîäû ïðîäîëæàåò ðàáîò àòü â òå÷åíèå 6,5 ìèí, ïîñëå
÷åãî áëîê ïåðåêëþ÷àå òñÿ â ðåæèì ýíåðãîñáåðåæåíèÿ.
Çàùèòíîå óñòðîéñòâî ñ äàò÷èêîì ðàñõîäà âîäû
Çàùèòíîå óñòðîéñòâî ñ äàò÷èêîì ðàñõîäà âîäû îòêëþ÷àåò ñâàðî÷íûé òîê ïðè
îò ñóòñòâèè îõëàæäàþùåé æèäêîñòè è âûâîäèò ñîîáùåíèå îá îøèáêå íà
ïàíåëü óïðàâëåíèÿ. Ýòî çàùèòíîå óñòðîéñòâî ïîñòàâëÿåòñÿ êàê
äîïîëíèòåëüíàÿ ïðèíàäëåæíîñòü.
RU
ba37d1ra -- 1 3 --
5.6 Ïóëüò äèñòàíöèîííîãî óïðàâëåíèÿ
Âåðñèÿ ïðîãðàììû â U8 äîëæíà áûòü 1.20 èëè âûøå. Äëÿ íàäëåæàùåãî
ôóíêöèîíèðîâàíèÿ äèñòàíöèîííîãî óïðàâëåíèÿ íà ìàøèíàõ ñî âñòðîåííûìè
ïàíåëÿìè óïðàâëåíèÿ äîëæíà áûòü óñòàíîâëåíà âåðñèÿ ïðîãðàììíîãî
îáåñïå÷åíèÿ 1.21 èëè âûøå.
Åñëè ïóëüò äèñòàíöèîííîãî óïðàâëåíèÿ ïîäê ëþ÷åí, èñòî÷íèê ïèòàíèÿ è áëîê
ïîäà÷è ïðîâîëîêè íàõîäÿòñÿ â ðåæèìå äèñòàíöèîííîãî óïðàâëåíèÿ; êíîïêè è
ðó÷êè áëîêèðóþòñÿ. Ðåãóëèðîâêó âñåõ ôóíêöèé ìîæíî âûïîëíèòü òîëüêî ïðè
ïîìîùè ïóëüòà äèñòàíöèîííîãî óïðàâëåíèÿ.
Åñëè ïóëüò äèñòàíöèîííîãî óïðàâëåíèÿ íå èñïîëüçóåòñÿ, åãî âìåñòå ñ
à äàïòåðîì ñëåäóåò îòñîåäèíèòü îò èñòî÷íèêà ïèòàíèÿ è áëîêà ïîäà÷è
ïðîâîëîêè, êîòîðûå â ïðîòèâíîì ñëó÷àå áóäóò ïðîäîëæàòü ðàáîòàòü â ðåæèìå
äèñòàíöèîííîãî óïðàâëåíèÿ.
Ïîäðîáíûå ñâåäåíèÿ î ðàáîòå ïóëüòà äèñòàíöèîííîãî óïðàâëåíèÿ ïðèâåäåíû
â èíñòðóêöèÿõ ïî ýêñïëóàòàöèè ïàíåëè óïðàâëåíèÿ.
6 ÒÅÕÍÈ×ÅÑÊÎÅ ÎÁÑËÓÆÈÂÀÍÈÅ
Ðåãóëÿðíîå òåõíè÷åñêîå îáñëóæèâàíèå èìååò âàæíîå çíà÷åíèå äëÿ
áåçîïàñíîé è íàä åæíîé ðàáîòû îáîðóäîâàíèÿ.
Òîëüêî ëèöà, èìåþùèå íàäëåæàùèå íàâûêè ðàáîòû ñ ýëåêòðè÷åñêèì
îáîðóäîâàíèåì (ýëåêòðèêè), ìîãóò ñíèìàòü çàùèòíûå ïëàñòèíû
Ïðèìå÷àíèå:
à àðàíòìèéíûå îáÿçàòåëüñòâà ïîñòàâùèêà òåðÿþò ñèëó, åñëè ïîêóïàòåëú
ñàìîñòîÿòåëúíî ïûòàåòñÿ ïð îèçâåñòè êàêèå-ëèáî ðàáîòû ïî óñòðàíåíèþ
íåèñïðàâíîñòåé èçäåëèÿ â òå÷åíèå ãàðàíòèéíîãî ñðîêà.
6.1 Åæåäíåâíî
Åæåäíåâíîå òåõíè÷åñêîå îáñëóæèâàíèå.
S Óáåäèòåñü, ÷òî âñå êàáåëè è ñîåäèíåíèÿ èñïðàâíû. Çàìåíèòå äåôåêòíûå
äåòàëè è çàòÿíèòå êðåïëåíèÿ ïðè íåîáõîäèìîñòè.
S Ïðîâåðüòå óðîâåíü îõëàæäàþùåé æèäêîñòè è åå ðàñõîä. Äîëåéòå
îõëàæäàþùóþ æèäêîñòü ïðè íåîáõîäèìîñòè.
RU
ba37d1ra -- 1 4 --
6.2 Ïðè íåîáõîäèìîñòè
S Ðåã óëÿðíî ñëåäèòå çà òåì, ÷òîáû èñòî÷íèê ïèòàíèÿ íå áûë çàáèò ãðÿçüþ.
Çàñîðåííûå èëè çàêóïîðåííûå îòâåðñòèÿ äëÿ ïîäâîäà è îòâîäà âîçäóõà
ìîãóò ñòàòü ïðè÷èíîé ïåðåãðåâà óñòðîéñòâà.
S Î÷èñòêà ïðîòèâîïûëüíîãî ôèëüòðà
S Óñòàíîâèòå íà ìåñòî çàùèòíóþ
ðåøåòêó âåíòèëÿòîðà ñ
ïðîòèâîïûëåâûì ôèëüòðîì (1).
S Îòêèíüòå çàùèòíóþ ðåøåòêó (2).
S Èçâëåêèòå ïðîòèâîïûëåâîé ôèëüòð
(3).
S Ïðîäóéòå ôèëüòð íà÷èñòî ñæàòûì
âîçäóõîì (ïîíèæåííîãî äàâëåíèÿ).
S Çàìåíèòå ýòîò ôèëüòð íà ôèëüòð
áîëåå òîíêîé î÷èñòêè íà ñòîðîíå
ðåøåòêè (2) (ñíàðóæè îò èñòî÷íèêà
ïèòàíèÿ).
S Óñòàíîâèòå íà ìåñòî çàùèòíóþ ðåøåòêó
âåíòèëÿòîðà ñ ïðîòèâîïûëåâûì ôèëüòðîì.
S Äîëåéòå îõëàæäàþùóþ æèäêîñòü
Ðåêîìåíäóåòñÿ ïðèìåíÿòü ãîòîâûé ê ïðèìåíåíèþ
õëàäàãåíò ïðîèçâîäñòâà ESAB. Ñì.
ïðèíàäëåæíîñòè íà ñòð. 35.
S Äîëåéòå îõëàæäàþùóþ æèäêîñòü äî ñåðåäèíû óðîâíÿ çàëèâíîãî
îòâåðñòèÿ.
ÑÎÁËÞÄÀÉÒÅ ÌÀÊÑÈÌÀËÜÍÓÞ ÎÑÒÎÐÎÆÍÎÑÒÜ!
Ñ îõëàæäàþùåé æèäêîñòüþ ñëåäóåò îáðàùàòüñÿ êàê ñ õèìè÷åñêèìè îòõîäàìè.
6.3 Åæåãîäíî
Ïðîâîäèòå ñëåäóþùåå òåõíè÷åñêîå îáñëóæèâàíèå ïî êðàéíåé ìåðå îäèí ðàç
âãîä.
S Î÷èñòèòå îò ïûëè è ãðÿçè. Ïðîäóéòå èñòî÷íèê ïèòàíèÿ íà÷èñòî ñóõèì
ñæàòûì âîçäóõîì (ïîíèæåííîãî äàâëåíèÿ).
S Çàìåíèòå îõëàæäàþùóþ æèäêîñòü è ïðîìîéòå øëàíãè è ðåçåðâóàð ÷èñòîé
âîäîé.
S Ïðîâåðüòå ïðîêëà äêè, êàáåëè è ñîåäèíåíèÿ. Çàìåíèòå äåôåêòíûå äåòàëè
è çàòÿíèòå êðåïëåíèÿ ïðè íåîáõîäèìîñòè.
RU
ba37d1ra -- 1 5 --
7 ÂÛßÂËÅÍÈÅ ÍÅÈÑÏÐÀÂÍÎÑÒÅÉ
Ïðåæäå ÷åì âûçûâàòü àòòåñòîâàííîãî ñïåöèàëèñòà ïî îáñëóæèâàíèþ,
ïîïðîáóéòå ñàìîñòîÿòåëüíî âûïîëíèòü ðåêîìåíäóåìûå íèæå ïðîâåðêè.
Òèï íåèñïðàâíîñòè Äåéñòâèÿ:
Îòñóòñòâèå äóãè S Ïðîâåðüòå, âêëþ÷åí ëè âûêëþ÷àòåëü ïèòàíèÿ.
S Ïðîâåðüòå ïðàâèëüíîñòü ïîäñîåäèíåíèÿ êàáåëåé
ïîäà÷è ñâàðî÷íîãî òîêà è îáðàòíûõ êàáåëåé.
S Ïðîâåðüòå, ïðàâèëüíî ëè çàäàíà âåëè÷èíà òîêà.
Ïðåðûâàíèå ñâàðî÷íîãî òîêà
âî âðåìÿ ñâàðêè
S Ïðîâåðüòå, íå ñðàáîòàëè ëè ðåëå çàùèòû îò òåïëîâîé
ïåðåãðóçêè (ñðàáàòûâàíèå ðåëå îïðåäåëÿåòñÿ ïî
çàãîðàíèþ îðàíæåâîé ëàìïû íà ëèöåâîé ïàíåëè).
S Ïðîâåðüòå ñåòåâûå ïðåäîõðàíèòåëè.
×àñòî ñðàá àòûâàþò ðåëå
çàùèòû îò òåïëîâîé
ïåðåãðóçêè.
S Ïðîâåðüòå, íå çàñîðåíû ëè âîçäóøíûå ôèëüòðû.
S Óáåäèòåñü â òîì, ÷òî íå ïðåâûøåíû íîìèíàëüíûå
çíà÷åíèÿ ïàðàìåòðîâ èñòî÷íèêà ïèòàíèÿ (ò. å. ÷òî
óñòðîéñòâî ðàáîòàåò áåç ïåðåãðóçêè).
Íèçêàÿ ýôôåêòèâíîñòü
ñâàðêè.
S Ïðîâåðüòå ïðàâèëüíîñòü ïîäñîåäèíåíèÿ êàáåëåé
ïîäà÷è ñâàðî÷íîãî òîêà è îáðàòíûõ êàáåëåé.
S Ïðîâåðüòå, ïðàâèëüíî ëè çàäàíà âåëè÷èíà òîêà.
S Óáåäèòåñü â òîì, ÷òî èñïîëüçóåòñÿ ïðîâîä òðåáóåìîãî
òèïà.
S Ïðîâåðüòå ñåòåâûå ïðåäîõðàíèòåëè.
8 ÈÍÔÎÐÌÀÖÈß ÄËß ÇÀÊÀÇÀ ÇÀÏÀÑÍÛÕ ×ÀÑÒÅÉ
Ðàáîòû ïî ðåìîíòó è ýëåêòðè÷åñêîìó ìîíòàæó äîëæíû âûïîëíÿòüñÿ
êâàëèôèöèðîâàííûì ñïåöèàëèñòîì ESAB .
Íåîáõîäèìî èñïîëüçîâàòü òîëüêî çàïàñíûå ÷àñòè, âûïóùåííûå ôèðìîé
ESAB.
Çàïàñíûå ÷àñòè ìîæíî çàêàçòú ó áëèæàéøåãî ê Âàì ESAB, (ñì. ïåðå÷åíú íà
ïîñëåäíåé ñòðàíèöå äàííîé áðîøþðû).
RU
ENGLISH
-- 1 6 --
TOCe
1 DIRECTIVE 17........................................................
2SAFETY 17...........................................................
3 INTRODUCTION 19...................................................
3.1 Equipment 19................................................................
4 TECHNICAL DATA 20.................................................
5 INSTALLATION 21....................................................
5.1 Lifting instructions 21.........................................................
5.2 Placing 21...................................................................
5.3 Mains power supply 22........................................................
5.4 Terminating resistor 22........................................................
5.5 Connection of multiple wire feed units 22........................................
6 OPERATION 24.......................................................
6.1 Connections and control devices 24............................................
6.2 Turning on the power source 24................................................
6.3 Fan control 25...............................................................
6.4 Overheating protection 25.....................................................
6.5 Cooling unit 25...............................................................
6.6 Remote control unit 25........................................................
7 MAINTENANCE 26....................................................
7.1 Daily 26.....................................................................
7.2 If necessary 26..............................................................
7.3 Every year 27................................................................
8 FAULT TRACING 28...................................................
9 ORDERING OF SPARE PARTS 28......................................
DIAGRAM 30............................................................
ORDERING NUMBER 33.................................................
SPARE PARTS LIST 34...................................................
ACCESSORIES 35.......................................................
-- 1 7 --
ba37d1ea
1DIRECTIVE
DECLARATION OF CONFORMITY
ESAB AB, Welding Equipment, SE--695 81 Laxå, Sweden, gives its unreserved guarantee that weld-
ing power source Mig 5000i, Mig 5000iw from serial number 620 (2006 w.20) are constructed and tes-
ted in compliance with the standard EN 60974--1/--2 and EN 60974--10 in accordance with the require-
ments of directive (2006/95/EC) and (2004/108/EEC).
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------
Kent Eimbrodt
Global Director
Equipment and Automation
Laxå 2007--03--14
2SAFETY
Users of ESAB welding equipment have the ultimate responsibility for ensuring that anyone who
works on or near the equipment observes all the relevant safety precautions. Safety precautions
must meet the requirements that apply to this type of welding equipment. The following recommen-
dations should be observed in addition to the standard regulations that apply to the workplace.
All work must be carried out by trained personnel well--acquainted with the operation of the welding
equipment. Incorrect operation of the equipment may lead to hazardous situations which can result
in injury to the operator and damage to the equipment.
1. Anyone who uses the welding equipment must be familiar with:
S its operation
S location of emergency stops
S its function
S relevant safety precautions
S welding
2. The operator must ensure that:
S no unauthorized person is stationed within the working area of the equipment when it is
started up.
S no--one is unprotected when the arc is struck
3. The workplace must:
S be suitable for the purpose
S be free from drafts
4. Personal safety equipment
S Always wear recommended personal safety equipment, such as safety glasses, flame--proof
clothing, safety gloves.
S Do not wear loose--fitting items, such as scarves, bracelets, rings, etc., which could become
trapped or cause burns.
5. General precautions
S Make sure the return cable is connected securely.
S Work on high voltage equipment may only be carried out by a qualified electrician.
S Appropriate fire extinquishing equipment must be clearly marked and close at hand.
S Lubrication and maintenance must not be carried out on the equipment during operation.
GB
-- 1 8 --
ba37d1ea
WARNING
READ AND UNDERSTAND THE INSTRUCTION MANUAL BEFORE INSTALLING OR OPERATING.
ARC WELDING AND CUTTING CAN BE INJURIOUS TO YOURSELF AND OTHERS. TAKE PRECAU-
TIONS WHEN WELDING. ASK FOR YOUR EMPLOYER’S SAFETY PRACTICES WHICH SHOULD BE
BASED ON MANUFACTURERS’ HAZARD DATA.
ELECTRIC SHOCK -- Can kill
S Install and earth the welding unit in accordance with applicable standards.
S Do not touch live electrical parts or electrodes with bare skin, wet gloves or wet clothing.
S Insulate yourself from earth and the workpiece.
S Ensure your working stance is s afe.
FUMES AND GASES -- Can b e dangerous to health
S Keep your head out of the fumes.
S Use ventilation, extraction at the arc, or both, to take fumes and gases away from your breathing zone
and the general area.
ARC RAYS -- Can injure eyes and burn skin.
S Protect y our eyes and body. Use the correct welding screen and filter lens and wear protective
clothing.
S Protect bystanders with suitable screens or curtains.
FIRE HAZARD
S Sparks (spatter) can cause fire. Make sure therefore that there are no inflammable materials nearby.
NOISE -- Excessive noise can damage hearing
S Protect y our ears. Use earmuffs or other hearing protection.
S Warn bystanders of the risk.
MALFUNCTION -- Call for expert assistance in the event of malfunction.
PROTECT YOURSELF AND OTHERS!
ESAB can provide you with all necessary welding p rotectio n and accessories.
WARNING!
Read and understand the instruction manual before installing
or operating.
Do not use the power source for thawing frozen pipes.
WARNING!
This product is solely intended for arc welding.
Do not dispose of electrical equipment together with normal waste!
In observance of European Directive 2002/96/EC on Waste Electrical and Electronic
Equipment and its implementation in accordance with national law, electrical equipment
that has reached the end of its life must be collected separately and returned to an
environmentally compatible recycling facility. As the owner of the equipment, you should
get information on approved collection systems from our local representative.
By applying this European Directive you will improve the environment and human health!
GB
-- 1 9 --
ba37d1ea
3 INTRODUCTION
The Mig 5000i is a MIG/MAG welding power source, which can also be used for
MMA welding.
There are two variants of the power source:
S Mig 5000i without cooling unit
S Mig 5000i with cooling unit.
NB: These instructions describe an Mig 5000i with a cooling unit.
The power source is intended for use with the Feed 3004 or Feed 4804 wire feed
units.
All the settings are made from the wire feed unit or control box U8.
ESAB’s accessories for the product can be found on page 35.
3.1 Equipment
The power source is supplied complete with terminating resistor, 5 m return cable
and instruction m anual.
GB
-- 2 0 --
ba37d1ea
4 TECHNICAL DATA
Mig 5000i
Mains voltage 400V, ±10%, 3 50/60 Hz
Primary current
I
max
MIG/MAG
I
max
MMA
39 A
40 A
No--load power demand when in the energy--saving mode,
6.5 min. after welding
50 W
Voltage/current range
MIG/MAG
MIG/MAG, control panel M2
MMA
8--60 V / 16-- 500 A
8-- 42 V
16-- 500 A
Permissible load at MIG/MAG
60 % duty cycle
100% duty cycle
500 A / 39 V
400 A / 34 V
Permissible load at MMA
60 % duty cycle
100% duty cycle
500 A / 40 V
400 A / 36 V
Power factor at maximum current 0.85
Efficiency at maximum current 86 %
Open -- circuit voltage
(MIG/MAG)
(MMA)
72 -- 88 V
68 -- 80 V
Operating temperature -- 1 0 t o + 4 0 ˚C
T ransportation temperature -- 2 5 t o + 5 5 ˚C
Dimensions, lxwxh
with cooling unit
625 x 394 x 496 mm
625 x 394 x 776 mm
Continual sound pressure at no--load <70db(A)
Weight
with cooling unit
66 kg
86 kg
Insulation class transformer H
Enclosure class IP 23
Application class
Cooling unit
Cooling power 2.0 kW at 40˚C temp. difference and
flow1.0 l/min
Coolant 50 % water / 50% mono--ethylen glycol
Coolant quantity 5.5 l
Maximum water flow 2.0 l/min
Maximum number of water--cooled welding
guns/torches that may be connected
two MIG welding guns or
one TIG torch and one MIG welding gun
GB
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38

ESAB Mig 5000i Manuale utente

Categoria
Sistema di saldatura
Tipo
Manuale utente
Questo manuale è adatto anche per

in altre lingue