ION Audio Audacity Manuale del proprietario

AUDACITY

SOFTWARE GUIDE

1

TABLE OF CONTENTS

GENERAL SOFTWARE NOTES...................................................................................... 2

AUDACITY SOFTWARE INSTALLATION....................................................................... 3

CONFIGURING WINDOWS VISTA TO WORK WITH THE USB TURNTABLE............. 4

CONFIGURING WINDOWS XP TO WORK WITH THE USB TURNTABLE................... 6

AUDACITY CONFIGURATION ON PC ............................................................................ 8

CONFIGURING AUDACITY FOR MAC OS 10.4 AND ABOVE ....................................10

RECORDING INTO THE COMPUTER...........................................................................14

ADJUSTING YOUR AUDIO LEVEL (optional)..............................................................15

CLEANING YOUR AUDIO (optional) ............................................................................16

HIGH-SPEED RECORDING OF YOUR VINYL (optional) ............................................ 19

DIVIDING YOUR ALBUM INTO TRACKS ..................................................................... 20

EXPORTING TRACKS TO SEPARATE FILES .............................................................23

LISTENING AND EXPORTING TO WAV/MP3 ..............................................................24

RECORDING 78RPM RECORDS ..................................................................................24

TROUBLESHOOTING .................................................................................................... 25

2

GENERAL SOFTWARE NOTES

Your USB turntable is compatible with any recording software that

supports USB Audio devices. We have included Audacity, however you

may prefer to use one of a variety of the 3

rd party software packages

that are also available.

Audacity is free software, distributed under the General Public License

(GPL). More information, as well as open source code, can be found on

the included CD or on the web at http://audacity.sourceforge.net.

Audacity works on both Windows (98 and greater) as well as Mac OS (X

and 9.2+). Software for Linux can be found on the Audacity website.

Go to http://audacity.sourceforge.net/help/tutorials for additional

tutorials.

The website also has information for separate add-ons to Audacity to

enhance performance and features.

3

AUDACITY SOFTWARE INSTALLATION

Before Starting the Software

Make sure that your USB turntable is plugged into the computer with the supplied USB cable,

and both the computer and the turntable are plugged in and on. Refer to the included USB

turntable quick start instruction manual before proceeding with software installation.

REMOVE THE CLEAR PLASTIC CARTRIDGE (NEEDLE) COVER

For your first recording, we recommend that you test your settings on

short section (a minute or less) of recorded audio so you can become familiar with the the

process before recording a full LP.

To Install Software (PC)

1. Plug your turntable into an AC power outlet and use the included USB cable to

connect the USB port on your turntable to the USB port on your computer.

2. Turn your computer on if it is not on already. Allow it to boot fully.

3. Turn on the turntable by pressing the power button near the base of the

tonearm.

4. Your computer might display a message saying that it has detected a new device,

and that it is available to use. Depending on your system, this message may or

may not appear. This is normal.

5. Insert the CD that came with your USB turntable into your computer’s CD drive.

6. A window will pop up automatically. Click on the [INSTALL] icon next to

“Audacity”.

To Install Software (MAC)

1. Plug your turntable into an AC power outlet and use the included USB cable to

connect the USB port on your turntable to the USB port on your computer.

2. Turn your computer on if it is not on already. Allow it to boot fully.

3. Insert the included CD into your computer’s CD drive.

4. Open the CD icon on the desktop.

5. Drag the installation folder for Audacity to your hard drive. We recommend that

you move the folder to your Applications folder.

6. A window will come up which shows the files copying.

7. Once the files are done copying, EJECT the CD.

SELECTING YOUR LANGUAGE

Before you begin using the software, note

that Audacity’s controls and menus can be

displayed in a variety of different languages.

Go to Edit | Preferences and click on the

Interface tab. Under the Language pull-

down tab, you can select your preferred

language.

4

CONFIGURING MICROSOFT WINDOWS VISTA TO

WORK WITH THE USB TURNTABLE

1. Close all programs that

are open on your

computer.

2. On the bottom left of

your screen, select the

Start menu.

3. Select Settings then

Control Panel.

4. In the window that

opens, find and double-

click the Sound control

panel. (If you don’t see

a choice called “Sound”,

choose the Switch to

Classic View option in

the panel on the left of

the window, and the

Sound Control Panel

should become available

on the right.)

5. Select the Recording

tab at the top of the

Sound Control Panel.

6. Under the Recording

tab, choose

Microphone - USB

Audio Codec as the

default device. The USB

Audio Codec represents

your Turntable.

7. Click on the Set Default

button to confirm your

choice.

5

8. Now select the Playback tab at the top of the Sound control

panel.

9. Under the Playback

tab, choose the

device that you

would like your

computer’s audio to

come out of.

Your computer’s

audio outputs may

appear as:

Speakers – High

Definition Audio

Device

or

Headphones –

High Definition

Audio Device

or both, depending

on the hardware

installed in your

computer.

Click on the device that best matches your desired audio setup

and click Set Default to confirm your selection.

Note: Do NOT choose “Speakers - USB Audio Codec” as your

playback device. USB Audio Codec represents your turntable,

and can only be used as recording input, not a playback output.

10. Click Set Default to confirm your choice.

11. Click Apply if possible, then click OK to close the Control Panel.

12. Click Apply (if possible), then click OK.

13. Make sure that your computer’s speakers (if not built-in) are

plugged into your computer’s audio output and turned on so you

can hear your recording. If your computer has a headphone

output, you can use headphones in-place of speakers.

6

CONFIGURING MICROSOFT WINDOWS XP

TO WORK WITH THE USB TURNTABLE

1. Close all programs that are

open on your computer.

2. On the bottom left of your

screen, select the Start

menu.

3. Select Settings then

Control Panel.

4. In the window that opens,

find and double-click the

Sounds and Audio

Devices control panel. (If

you don’t see a choice

called Sounds and Audio

Devices, choose the Switch

to Classic View option in the

panel on the left of the

window, and the Sounds

and Audio Devices should

become available on the

right.

5. Select the Voice tab at the

top of the Sounds and Audio

Devices control panel.

6. Under Voice Playback,

choose your internal sound

card as the default device.

This varies by computer but

should not be set to “USB

Audio Codec, Modem, or

Microsoft Sound Mapper.”

7. Under Voice Recording,

select USB Audio Codec for

your default device – this is

the USB truntable.

7

8. Select the Audio tab at the

top of the Sounds and Audio

Devices control panel.

9. Under Sound Playback,

choose your internal sound

card as the default device.

This varies by computer but

should not be set to “USB

Audio Codec, Modem, or

Microsoft Sound Mapper.”

10. Under Sound Recording,

select USB Audio Codec

for your default device –

this is the USB turntable.

11. Check the box titled Use

only default devices.

12. Click Apply (if possible), then click OK.

13. Make sure that your computer’s speakers (if not built-in) are

plugged into your computer’s audio output and turned on so you

can hear your recording. If your computer has a headphone

output, you can use headphones in-place of speakers.

8

AUDACITY CONFIGURATION ON PC

1. Launch Audacity: Click on the Start menu on the bottom left of

your screen. Select All Programs, then Audacity.

2. In Audacity, click on the Edit menu at the top of the screen.

3. Select Preferences from the Edit menu.

Figure 1: Select Preferences

The Audacity Preferences window will come up (Figure 2).

Choose the Audio I/O tab from the top of the Preferences

screen.

4. Set your Playback Device to your internal sound card. Since

different computers have different internal sound cards, your

selection may be different from the image below (Figure 2). The

correct selection, however, will NOT be USB Audio Codec,

Microsoft Sound Mapper or Modem.

5. Set your Recording Device to USB Audio Codec. This

represents your turntable.

Note: The USB turntable may show up with a different name in

the Preferences window. This may depend on your computer

model and operating system. 99% of the time it will contain

“USB” in the Name.

6. Set Channels to 2 (Stereo).

7. Check the box labeled Software Playthrough.

9

Figure 2: Select USB Audio Device from Preferences

8. Under the Quality tab, set the Default Sample Format to 16-

bit.

9. Select OK to save your settings and close the Preferences

window.

10. At the top of the main Audacity window, to the right of the play

control buttons, you will see the input and output level meters

(labeled L and R). Under the output level meter, is an icon that

looks like a microphone. Next to the microphone is a black

arrow that points down. Click this arrow and select Monitor

Input. (If you don't see the input and output level meters, open

your Preferences again as described above, select the Interface

tab, and make sure that Enable Mixer Toolbar is checked.)

You should be all ready to record.

These settings will be saved when you exit. However, you will need to

select Monitor Input from the input meter’s drop-down menu each

time you launch Audacity.

10

CONFIGURING AUDACITY FOR MAC OS

10.4 AND ABOVE

1. With the Audacity program open, click on the Audacity menu at

the top of the screen.

2. Select Preferences from the Audacity menu.

3. Under the Audio I/O tab, set your Playback Device to Built-

In Audio.

4. Under the Audio I/O tab, set your Recording Device to USB

Audio Codec.

5. Under the Audio I/O tab, set your Channels to 2 (Stereo).

6. Check the box labeled Software Playthrough.

7. Under the Quality Tab, set the Default Sample Format to 16-

bit.

11

8. Select OK to save your settings and close the Preferences

window.

9. At the top of the main Audacity window, to the right of the play

control buttons, you will see the input and output level meters

(labeled L and R). Under the output level meter, is an icon that

looks like a microphone. Next to the microphone is a black

arrow that points down. Click this arrow and select Monitor

Input. (If you don't see the input and output level meters, open

your Preferences again as described above, select the Interface

tab and make sure that Enable Mixer Toolbar is checked.)

These settings will be saved when you exit. However, you will need to

select Monitor Input from the input meter’s drop-down menu each

time you launch Audacity.

12

Other Important Macintosh Settings:

We have set up Audacity’s separate playback and record preferences,

but your Mac also has its own audio playback and record settings. When

you first connect the turntable, the Macintosh will often select the “USB

Audio Codec” as the audio input and output for your entire system.

Since your turntable does not have speakers, audio will not be heard

from your other programs until you tell your Mac not to use the

turntable as an output device.

Here’s how to change these settings so that your internal sound card will

always be used for playback, whether or not your turntable is connected

via USB:

The Audio Midi Setup Utility:

1. Open your Finder.

2. Open your Applications folder.

3. In the Applications folder, open the Utilities folder.

4. In the Utilities folder, open the Audio MIDI Setup.

5. In the Audio MIDI Setup under Audio Devices, set:

The Default Input to USB Audio Codec

The Default Output to Built-in Audio or Built-in Output

The System Output to Built-in Audio or Built-in Output

13

Now, programs other than Audacity will only use your internal sound

card for audio output.

14

RECORDING INTO THE COMPUTER

Note: We recommend that the first time you use the

software you test with a small (1min or less) section of

audio while recording. Once you feel comfortable with

recording, then record a full song or LP.

1. Press the Record Button

2. Start playback on the USB Turntable. You will see the waveform of

the audio on the screen as it is recording. You will hear the audio

coming from the output of your computer’s soundcard.

No Audio? - go back to the preference menu (Figure 2) and make

sure you have “Software Playthrough” selected and the speaker

volume up on your computer. See troubleshooting at the end of this

manual for more help.

3. Play through the entire track/album you desire to record.

4. Press Stop

5. SAVE YOUR FILE NOW

by clicking on File -> Save Project.

Select the destination and file name for the project and click Save.

6. You have completed the recording process. The file you just saved

to your computer is an Audacity Project file. This file can only be

opened by Audaity. The following sections will guide you through

some optional editing that may be performed, as well as how to

divide this Audacity Project into separate Wav files which may be

burned to CD or played in music programs such as iTunes and

Windows Media Player.

Figure 3: Recording Sample

15

ADJUSTING YOUR AUDIO LEVEL (optional)

1. Select your entire recording by selecting Edit, then Select…, then

click All. You can also use Ctrl+A on a PC or APPLE+A on a

Macintosh to quickly select all.

Figure 4: Select All

2. Select the Effect menu and choose the desired effect.

a. There are various types of effects which are described

further in the software’s help section as well as on the web

(See Figure 5).

b. Normalize should be used to have the correct volume on

the recording. (See Figure 6)

Please note:

It is a good idea to place the needle on the record, while it is

stopped, before you begin the recording and press ‘Play’ on

the turntable after you begin recording. If you place the

needle down while the record is spinning and after you have

began recording, there might be audible clicks and pops.

These clicks on pops might not allow the Normalize effect to

bring the volume of the recording to the level that it should

be.

16

Figure 5: Effect Drop Down List

Figure 6: Normalize

CLEANING YOUR AUDIO (optional)

1. Drag the cursor over a portion of the audio track which contains

noise. We recommend using the beginning or the end of a track

where there is no music and only vinyl noise. (See Figure 7)

2. Select Noise Removal from the Effect drop down menu to bring up

the Noise Removal window. (See Figure 8)

3. Click Get Noise Profile. The Noise Removal window will now close

automatically.

4. Select the entire track of audio you wish to remove noise from. If

you wish to clean up the entire recording use Select All under the

Edit Menu. (See Figure 4)

5. Repeat Step 2 to bring up the Noise Removal Window.

6. Adjust the amount of audio that you would like to filter by moving

the slider in the Noise Removal window. We recommend using the

minimum noise removal for optimum sound.

Note: you can preview the audio before removing the noise by

clicking on Previe’.

7. Click on Remove Noise.

17

Figure 7: Selecting Noise in Track

Figure 8: Noise Removal Window

18

Additional Editing Notes:

 Audio levels may vary based on the cartridge (needle), tone arm

counter weight, vinyl, and computer set up. We recommend always

normalizing your audio.

 Similar to word processing, you may delete unwanted audio by

dragging over the section, which will highlight, then pressing

Delete. This may include excessive hiss, silence before/after songs,

or skips/scratches.

 You must select the noise profile before you can remove the noise

from a track. If you select actual audio for the noise profile, the

computer may remove all of your audio. See Step 1.

 Once the Noise Profile is set, it will save the profile until you restart

the application. In other words, the software must learn what the

noise profile is only when you first start the software. You do not

need to get the noise profile for every recording once it is set up.

19

HIGH-SPEED RECORDING OF YOUR VINYL

(optional)

Using the USB turntable with Audacity software, you are able to quickly

record your 33 1/3 speed vinyl into the computer and use the software

to adjust the faster speed back to normal playback. This feature is

useful for recording multiple records. For example, you can record 10

minutes of audio in as little as 7 minutes when recording at 45RPM.

Saving three minutes isn’t a large saving for one record, but if you are

recording multiple LPs, you can record 4 hours of music in under 3

hours.

Instructions:

1. Record your 33 1/3 RPM vinyl at 45RPM by pressing the 45RPM of

the turntable.

2. You will hear the audio recording at an unusual pitch due to its high

speed.

3. When you finish recording stop the recording.

4. Go to Edit and Select All (See Figure 4).

5. Go to Effect and then the Change Speed Menu.

Select from 45 to 33 1/3 and your vinyl will be adjusted to the

correct speed as shown in Figure 9.

Figure 9: Change Speed

La pagina si sta caricando...

ION Audio Audacity Manuale del proprietario

ION Audio Audacity Manuale del proprietario

in altre lingue

Altri documenti