StarTech SV221HUC4K Port 60Hz HDMI KVM Switch USB-C Host Port Guida utente

Categoria
Switch KVM
Tipo
Guida utente
Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: May 31, 2022 2:55 PM
Product ID
SV221HUC4K
Front
Rear
2 Port 4K 60Hz HDMI KVM Switch with one USB-C Host Port
Component Function
1Port Selection Button Press the Port Selection Button to switch
between PC 1 or PC 2
2Console USB HID Ports
Connect a Human Interface Device (HID) (e.g.
Keyboard, Mouse, Trackpad, Number Keypad, or
Drawing Tablet)
Front (x2)
USB 2.0 (480Mbps)
3PC 1 USB-C Host Port
Connect to a Computer with a USB-C Port
For full functionality Host Computer USB-C Port
must support DP-Alt Mode
4PC 1 Selection Indicator Solid Blue: PC 1 is selected
5PC 2 USB Micro-B Host
Port Connect to a USB 2.0 or higher port on PC 2
6PC 2 Selection Indicator Solid Blue: PC 2 is selected
7PC 2 HDMI Input Port Connect to an HDMI Port on PC 2
8Console HDMI Output
Port Connect to an HDMI Input on a Display
Product Information
For the latest manuals, product information, technical specications, and declarations of
conformance, please visit: www.StarTech.com/SV221HUC4K
Package Contents
KVM Switch x 1
USB-C Cable (1 m) x 1
USB-A to Micro USB-B Cable (1 m) x 1
HDMI Cable (1 m) x 1
Quick-Start Guide x 1
35 7
2
1
8
4 6
Regulatory Compliance
FCC - Part 15
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could
void the user’s authority to operate the equipment.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
CAN ICES-3 (B)/NMB-3(B)
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two
conditions:
(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may
cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation
est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
Warranty Information
This product is backed by a two-year warranty.
For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)
for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss
of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the
product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the
limitations or exclusions contained in this statement may not apply to you.
Safety Measures
If product has an exposed circuit board, do not touch the product under power.
Mesures de sécurité
Si l’un des circuits imprimés du produit est visible, ne pas touchez le produit lorsqu’il est sous tension.
安全対策
製品に露出した状態の回路基盤が含まれる場合、電源が入っている状態で製品に触らないでください。
Misure di sicurezza
Se il prodotto ha un circuito stampato visibile, non toccare il prodotto quando è acceso.
Säkerhetsåtgärder
Rör aldrig vid enheter med oskyddade kretskort när strömmen är påslagen.
FR: startech.com/fr
DE: startech.com/de
ES: startech.com/es
NL: startech.com/nl
IT: startech.com/it
JP: startech.com/jp
StarTech.com
Ltd.
45 Artisans Cres
London, Ontario
N5V 5E9
Canada
StarTech.com Ltd.
Unit B, Pinnacle 15
Gowerton Rd,
Brackmills
Northampton
NN4 7BW
United Kingdom
StarTech.com LLP
4490 South Hamilton
Road
Groveport, Ohio
43125
U.S.A.
StarTech.com Ltd.
Siriusdreef 17-27
2132 WT Hoofddorp
The Netherlands
Requirements
Source PCs
USB-C DisplayPort Alt-mode enabled Computer x 1
USB-A and HDMI enabled Computer x 1
Console
HDMI Display x 1
HDMI Cable x 1
USB Mouse x 1
USB Keyboard x 1
Installation
Connect the Console
Note: Power o all Computers, Displays, and Peripherals before completing the
following steps.
1. Connect an HDMI Display to the Console HDMI Output Port, located on the rear of the KVM
Switch, using an HDMI Cable (sold separately).
2. Connect a USB Mouse and a USB Keyboard to the Console USB HID Ports, located on the
front of the KVM Switch.
Connect the PCs
1. Connect the included USB-C Cable from the PC 1 USB-C Host Port, located on the front of the
KVM Switch, to an available USB-C Port on PC 1.
Note: For full functionality the Host Computer USB-C Port must support DP-Alt Mode
2. Connect the included USB Micro-B Cable from the PC 2 USB Micro-B Host Port, located on
the front of the KVM Switch, to an available USB port on PC 2.
3. Connect the included HDMI Cable from the PC 2 HDMI Input Port, located on the front of the
KVM Switch, to an available HDMI Output Port on PC 2.
  • Page 1 1
  • Page 2 2

StarTech SV221HUC4K Port 60Hz HDMI KVM Switch USB-C Host Port Guida utente

Categoria
Switch KVM
Tipo
Guida utente