ProLights AIR5FAN Manuale utente

MANUALE UTENTE

USER MANUAL

AIR5FAN

MOVING HEAD

IT - EN

AIR5FAN

2

reproduced in any form or by any means for any commercial use.

In order to improve the quality of products, Music&Lights S.r.l. reserves the right to modify the

characteristics stated in this instruction manual at any time and without prior notice.

All revisions and updates are available in the ‘manuals’ section on site www.musiclights.it

REV.002-02/18

1

AIR5FAN

Packing content

• AIR5FAN

• User manual

TABLE OF CONTENTS

Safety

General instructions

Warnings and installation precautions

1 Introduction

1. 1 Description

1. 2 Technical specications

1. 3 Operating elements and connections

2 Installation

2. 1 Mounting

3 Functions and settings

3. 1 Operation

3. 2 Basic

3. 3 Menu structure

3. 4 Linking

3. 5 DMX mode

3. 6 DMX conguration

3. 7 DMX addressing

3. 8 Wireless control settings

3. 9 DMX control

3. 10 Display settings

3. 11 Special functions

3. 12 Fixture settings

3. 13 Lamp settings

3. 14 Fixture information

3. 15 Operation in automatic mode

3. 16 Slave Receive mode

3. 17 Scenes Record mode

3. 18 Music mode

3. 19 Sensitivity microphone

3. 20 Connection of the DMX line

3. 21 Construction of the DMX termination

4 Maintenance

4. 1 Maintenance and cleaning the unit

4. 2 Fuse replacement

4. 3 Trouble shooting

2

3

5

6

7

8

10

11

12

15

16

17

18

19

20

21

22

23

AIR5FAN

2

WARNING! Before carrying out any operations with the unit, carefully read this instruction

manual and keep it with cure for future reference. It contains important information about

the installation, usage and maintenance of the unit.

SAFETY

General instruction

• The products referred to in this manual conform to the European Community Directives and are there-

fore marked with .

• The unit is supplied with hazardous network voltage (230V~). Leave servicing to skilled personnel only.

Never make any modications on the unit not described in this instruction manual, otherwise you will

risk an electric shock.

• Connection must be made to a power supply system tted with ecient earthing (Class I appliance ac-

cording to standard EN 60598-1). It is, moreover, recommended to protect the supply lines of the units

from indirect contact and/or shorting to earth by using appropriately sized residual current devices.

• The connection to the main network of electric distribution must be carried out by a qualied electrical

installer. Check that the main frequency and voltage correspond to those for which the unit is designed

as given on the electrical data label.

• This unit is not for home use, only professional applications.

• Never use the xture under the following conditions:

- in places wet;

- in places subject to vibrations or bumps;

- in places with an ambient temperature of over 45°C.

• Make certain that no inammable liquids, water or metal objects enter the xture.

• Do not dismantle or modify the xture.

• All work must always be carried out by qualied technical personnel. Contact the nearest sales point for

an inspection or contact the manufacturer directly.

• If the unit is to be put out of operation denitively, take it to a local recycling

plant for a disposal which is not harmful to the environment.

Warnings and installation precautions

• If this device will be operated in any way dierent to the one described in this manual, it may suer

damage and the guarantee becomes void. Furthermore, any other operation may lead to dangers like

short circuit, burns, electric shock, etc.

• Before starting any maintenance work or cleaning the projector, cut o power from the main supply.

• Always additionally secure the projector with the safety rope. When carrying out any work, always com-

ply scrupulously with all the regulations (particularly regarding safety) currently in force in the country

in which the xture’s being used.

• For inside use only. Not designed for outside use.

• The minimum distance between the xture and surrounding walls must be more than 50 cm and the

air vents at the housing must not be covered in any case.

• Install the xture in a well ventilated place.

• Keep any inammable material at a safe distance from the xture.

• The maximum temperature that can be reached on the external surface of the tting, in a thermally

steady state, is high. After power o, please cool down over 15 minutes.

• Shields, lenses or ultraviolet screens shall be changed if they have become damaged to such an extent

that their eectiveness is impaired.

• The lamp (LED) shall be changed if it has become damaged or thermally deformed.

• Never look directly at the light beam. Please note that fast changes in lighting, e. g. ashing light, may

trigger epileptic seizures in photosensitive persons or persons with epilepsy.

3

AIR5FAN

- 1 - INTRODUCTION

1.1 DESCRIPTION

AIR5FAN is a pixel-FX moving head able to control the spread of its pixels through motorized lens system,

passing from a sharp linear beam eect to a MultiRay. It empowers 5x40W RGBW/FC LED, with 2° beam

each, delivering stunning brightness for big setups and featuring innite rotation over Pan and Tilt. Last

but not least, AIR5FAN allows to mount a mirror on its housing, featuring an added eect as moving pro-

jecting surface bouncing beams of other light sources.

1.2 TECHNICAL SPECIFICATIONS

LIGHT SOURCE

• Source: 5x40W RGBW Osram Ostar LED

• Lux: 27211lux @3m

• Source Life Expectancy: >50.000 h

OPTICS

• Beam Angle: 2°

• Lens Diameter: 68mm

• Lens Type: HQ glass lens optics

COLOR SYSTEM

• Color Mixing: RGBW/FC

• CTC: CTC control through independent DMX channel

• White Presets: 2700-10000K

• Color Wheel: Virtual color wheel with presets

DYNAMIC EFFECTS

• Pixel Patterns: Preprogrammed dynamic and static patterns

• FX Generator: Adjustable foreground/background color, index, speed, direction

• Special Features: Head pivot control, mirror reecting beams

BODY

• Hardware On-board: Mountable mirror through quick-lock screws

• Pan Angle: 540/630° with 360° continuous rotation

• Tilt Angle: 360° with 360° continuous rotation

• Pan/Tilt Resolution: 16bit

• Feedback: Automatic repositioning after accidental movement

• Body: Aluminium structure with hi-resistance polycarbonate cover

• Body Color: Black

• Other: Pivot angle: 0-28°

CONTROL

• Protocols: DMX512, RDM, Art-Net

• DMX Channels: 17/27/43ch

• Pixel Control: Pixel2Pixel control

• W-DMX: Optional, Wireless Solution receiver

• RDM: RDM ready for xture remote monitor and settings

• Display: LCD high resolution color display with autoip

• Firmware Upgrade: Yes, via USB-DMX interface (UPBOX2) not included

AIR5FAN

4

• Hibernation: Power Safe Mode when lost DMX

• Master/Slave: for synchronized operation of more units linked in a chain

ELECTRONICS

• Dimmer: Linear 0~100% electronic dimmer

• Strobe/Shutter: 1-30 Hz, electronic

• Battery Backup: Battery backup for user operation without connecting to the main power

• Operating Temperature: -10° ~ +45°

• Flicker: Flicker free operation

ELECTRICAL

• Power Supply: 100-240V – 50/60Hz

• Power Consumption (at 230V): 208W

• Power Consumption (at 120V): 218W

PHYSICAL

• Cooling: Aluminium heat sink cooling system and low noise fan

• Suspension And Fixing: Any position with “quick-lock” omega brackets

• Pan/Tilt Lock: Pivot lock for trasportation and maintenance

• Signal Connection: DMX 5p IN/OUT Amphenol, ARTNET IN/OUT

• Power Connection: PowerCON TRUE1 in

• IP: 20

• Dimensions (WxHxD): 577.5x473.8x242 mm

• Weight: 16kg

577.5mm

227,36 in

473.8mm

186,53 in

412.7mm

162,48in

242mm

9,53 in

Technical drawing

Fig.1

5

AIR5FAN

1.3 OPERATING ELEMENTS AND CONNECTIONS

Fig.3

1. LED BAR

2. ROTARY ARM

3. HANDLE

4. LED INDICATOR "WDMX"

5. MICROPHONE

6. CONTROL PANEL with LCD display and 5

button used to access the control panel

functions and manage them.

7. EtherCON connector Signal IN/OUT

8. EtherCON connector Signal IN/OUT

9. DMX IN (5-pole XLR): 1 = ground, 2 = DMX-, 3

= DMX+, 4 N/C, 5 N/C

10. DMX OUT (XLR a 5 poli): 1= massa, 2 = DMX -,

3 = DMX +, 4 N/C, 5 N/C

11. POWER IN (PowerCON IN): for connection to a

socket (100-240V~/50-60Hz) via the supplied

12. MAIN FUSE HOLDER: replace a burnt-out fuse

by one of the same type onlymains cable.

1

2

A

B

3

5

64

12

9

10 117 8

View B

View A

AIR5FAN

6

2.1 MOUNTING

The may be set up on a solid and even surface. By means of the xing facilities of the baseplate, the

unit can also be mounted upside down to a cross arm. The base plate is shown in g.3. For xing, stable

mounting clips are required. According to the gure, the bolts of the brackets are placed into the openings

provided in the base plate and turned clockwise until they lock (to the stop). Always ensure that the unit

is rmly xed to avoid vibration and slipping while operating. The mounting place must be of sucient

stability and be able to support a weight of 10 times of the unit’s weight. When carrying out any installa-

tion, always comply scrupulously with all the regulations (particularly regarding safety) currently in force

in the country in which the xture’s being used. Always additionally secure the projector with the safety

rope from falling down. For this purpose, fasten the safety rope at a suitable position so that the maximum

fall of the projector will be 20 cm.

Fig.3

ALISCAFF

CLAMP

SAFETY

CABLE

OMEGA

BRACKETS

- 2 - INSTALLATION

7

AIR5FAN

- 3 - FUNCTIONS AND SETTINGS

3.1 OPERATION

Connect the supplied main cable to a socket (100-240V~/50-60Hz). The unit will run built-in program to

reset all motors to their home position. Shortly after that the AIR5FAN is ready for operation. To switch o,

disconnect the mains plug from the socket. For a more convenient operation it is recommended to con-

nect the unit to a socket which can be switched on and o via light switch.

3.2 BASIC

The AIR5FAN has a LCD display and 5 button used to access the control panel functions and manage them

(g.4).

Fig.4 - Functions of the buttons and display icons

LEFT RIGHT UP DOWN ENTER BATTERY

Return to the top

level

Commute from

units, tens, hundred

in the menu

Increases the value

displayed or passes

to the previous item

in a menu

Decreases the value

displayed or passes

to the next item in

the menu

Conrms the

displayed value,

or activates the

displayed function,

or enters the

successive menu

Used to activate the

backup battery. It

allows to switching

display interface

without main power

CONNECT

LIGHT

INFORMATION

SET

PROGRAM

AIR5FAN

8

3.3 MENU STRUCTURE

MENU

1 CONNECT

ð

Address

ð

DMX

ð

Value (1-512)

W-DMX

ð

Value (1-512)

Artnet

ð

Value (1-512)

DMX Mode

ð

Mode

ð

WASH / FX / PIXFX/User

Edit User

ð

Max Channel/Control// Fine/Tilt/...

Wireless

ð

DMX Out

ð

ON/OFF

Reset Connect

ð

YES/NO

Ethernet

ð

DMX Out

ð

ON/OFF

IP Address

IP Mask

Universe

RDM ID

ð

Name

ð

Fixture ID Name

Mode

ð

Mode1/Mode2

Password

PID Code

2 SET UP

ð

Temperature

ð

Temperature C/F

ð

Celsius/Fahrenheit

Max Temperature

ð

Value (80~139°/176~282° (90°))

Movement

ð

Pan Reverse

ð

YES/NO

Tilt Reverse

ð

YES/NO

Pan degree

ð

630/540

Feedbacks

ð

YES/NO

Pan/Tilt Mode

ð

Standard/Smooth

Continuos

Screen

ð

Backlight

ð

Always On/Min (01-99)

Flip Display

ð

YES/NO/AUTO

Display Bright

ð

Value (00-31)

Key Lock

ð

ON/OFF

Language

ð

EN/FR/SP...

Fixture

ð

Fans Mode

ð

Auto Speed/High Speed

No Signal

ð

Close/Hold/Auto/Music

Hibernation

ð

Disable/Min (01-99)

Theater Mode

ð

YES/NO

Frequency 600Hz…… (1200Hz)

Adjust

ð

Pan, Tilt, [...]

ð

Value (000-255) for each function

3 ADVANCED

ð

Reset

ð

All

Pan&Tilt

Others

9

AIR5FAN

3

Calibration

ð

Password

Pan

Tilt

1LED RED

1LED GREEN

1LED BLUE

....

51LED RED

5LED GREEN

5LED BLUE

Others

Reload Default

ð

Basic Reload

ð

ON/OFF

Program Reload

ð

ON/OFF

Password

ð

050 (unlocks the following settings)

Private Reload

ð

ON/OFF

All Reload

ð

ON/OFF

4 INFORMATION

ð

Time I nfo.

Current (XXXX(Hours))

Fixture Life (XXXX(Hours))

Temperature

Near Lamp Temp (depends on

xture)

Fans Speed

Near Lamp Fan (depends on

xture)

Channel Value Pan……

Error Message Pan,Tilt……

Fixture Model xxxxx

Software Ver. 1U01 V1.0.00……………..

5 STAND ALONE

ð

Play

ð

DMX Receive

Slave Receive

ð

Part 1-2-3 Receive

Static

ð

1-250 Scene

Sequence

ð

Alone/Master

Music

ð

Alone/Master

Mic Sens.

ð

Value (00-99%)

Select Chase

ð

Chase Part 1

ð

Chase 1 - Chase 8

Chase Part 2 Chase 1 - Chase 8

Chase Part 3

ð

Chase 1 - Chase 8

Edit Chase

ð

Chase 1

ð

Chase Test

Chase 2

ð

Step 1 - 64

....

Chase 8

ð

Step 1 - 64

Edit Scenes

ð

Edit Scenes 001

Edit Scenes ...

Edit Scenes 250

Scenes Record

ð

Sc XX - Sc XX

AIR5FAN

10

3.4 LINKING

Several units may be interconnected in order to control all further slave units to the same eect of the

master unit.

1. Connect the DMX OUT of the master unit via 5-pole XLR cable to the DMX IN of the rst slave unit.

2. Connect the DMX OUT of the rst slave unit to the DMX IN of the second slave unit, etc. until all units

are connected in a chain.

3.5 DMX MODE

To enter the DMX mode, follow these steps:

• Press the ENTER button to access the main menu.

• Press the UP/DOWN button to scroll the menu, select the Connect icon, then press the ENTER button to

enter the next menu.

• Press the UP/DOWN button to scroll through the menu, select the DMX Address and press the ENTER key.

• Press the arrow keys to select the desired value (001-512).

• Press the ENTER key to conrm the setting.

• Press the LEFT button repeatedly to exit the menu and save changes.

3.6 DMX CONFIGURATION

The AIR5FAN has 3 DMX channel congurations which can be accessed from the control panel.

• Press the ENTER button to access the main menu.

• Press the UP/DOWN button to scroll the menu, select the Set icon, then press the ENTER button to enter

the next menu.

• Press the UP/DOWN button to scroll through the menu, select Users and press the ENTER button to

enter the next menu.

• Press the UP/DOWN button to scroll through the menu, select User Mode and press ENTER to conrm

your choice.

• Use the UP/DOWN button to select the desired DMX channel conguration (Wash, FX, PIXFX), then press

the ENTER button to conrm your choice.

• Press the LEFT button repeatedly to exit the menu and save changes.

The tables on page 12 show the mode of operation and their values DMX.

The unit is equipped with 5-pole XLR connections.

Edit User

The Edit User, in the same menu, allows you to create a prole of personalized functions. You can change

the parameters of the various functions (Control, Tilt, etc.). Once you’ve created your custom prole, you

can use it by selecting the USER mode as described above.

3.7 DMX ADDRESSING

For operation via light control unit with DMX512 protocol, is sucient connect the controller to AIR5FAN.

To able to operate the AIR5FAN with a light controller, adjust the DMX start address for the rst a DMX

channel. If e. g. address 33 on the controller is provided for controlling the function of the rst DMX chan-

nel, adjust the start address 33 on the AIR5FAN. The other functions of the light eect panel are then

automatically assigned to the following addresses.

An example with the start address 33 is shown below:

Numero

canali DMX

Indirizzo di

start (esempio)

Indirizzo DMX

occupati

Prossimo indirizzo di start

possibile per unità n°1

Prossimo indirizzo di start

possibile per unità n°2

Prossimo indirizzo di start

possibile per unità n°3

17 33 33-50 51 70 89

43 33 33-75 76 118 161

11

AIR5FAN

Fig.5 - Example 17 DMX channels conguration

DMX Address: 89DMX Address: 51DMX Address: 33 DMX Address: 70

. . . . . . . . . . . .

DMX512 Controller

3.8 WIRELESS CONTROL SETTINGS

To enable wireless control mode, proceed as follows:

• Press the ENTER button to access the main menu.

• Press the UP/DOWN button to scroll the menu, select the Connect icon, then press the ENTER button to

enter the next menu.

• Press the UP/DOWN button to scroll through the menu, select Wireless DMX and press ENTER.

• Press the UP/DOWN and LEFT/RIGHT buttons to select the desired value (001-512).

• Press the ENTER key to conrm the setting.

To change the settings of wireless control, proceed as follows:

• Press the ENTER button to access the main menu.

• Press the UP/DOWN button to scroll the menu, select the Set icon, then press the ENTER button to enter

the next menu.

• Press the UP/DOWN button to scroll through the menu, select Wireless Set, and press the ENTER button

to enter the next menu.

• Press the UP/DOWN button to select the option proposed and press the ENTER button to conrm your

choice.

- DMX On Cable - Disable/enable the DMX signal cable. Select OFF to deactivate or ON to activate the

function.

- Reset Connect - Reset the wireless connection of the unit. Select OFF to deactivate or ON to activate

the function.

• Press the ENTER button to conrm your choice.

• Press the LEFT button repeatedly to exit the menu and save changes.

AIR5FAN

12

3.9 DMX CONTROL

AIR5FAN

WASH FX PIX-FX

AIR5FAN

FUNCTION

DMX

Value

17CH 27CH 43CH

1 1 1

PAN

Pan coarse

000 - 255

2 2 2

PAN FINE

Pan ne

000 - 255

3 3 3

TILT

Tilt coarse

000 - 255

4 4 4

TILT FINE

Tilt ne

000 - 255

5 5 5

MOVMENT SPEED

Fastest to slowest

Movement with Blackout

000 - 250

251 - 255

6 6 6

PAN CONTINUOUS

No function

Forwards Pan rotation from fast to slow

No rotation

Backwards Pan rotation from slow to fast

000 - 003

004 - 127

128 - 131

132 - 255

7 7 7

TILT CONTINUOUS

No function

Forwards Pan rotation from fast to slow

No rotation

Backwards Pan rotation from slow to fast

000 - 003

004 - 127

128 - 131

132 - 255

8 8 8

SHUTTER

Shutter closed

Strobe eect slow to fast

No function (shutter open)

Pulse-eect in sequences

Random strobe eect slow to fast

No function (shutter open)

000 - 010

011 - 082

083 - 093

094 - 163

164 - 174

175 - 244

245 - 255

9 9 9

DIMMER

Dimmer 0% ~ 100%

000 - 255

10 10

DIMMER FADE

0% to 100%

000 - 255

10 11 11

VIRTUAL COLOR FUNCTION

Normal Function

White presets

Forward Spin

Reverse Spin

Continuous

TBD

000 - 015

016 - 031

032 - 047

048 - 063

064 - 079

080 - 255

11 12 12

VIRTUAL COLOR 1

White Presets

White 2000K ~ 2700K

White 2700K ~ 3200K

White 3200K ~ 4200K

White 4200K ~ 5600K

White 5600K ~ 8000K

White 8000K ~ 10000K

Forward Spin

Rainbow Eect (Slow to Fast)

Reverse Spin

Rainbow Eect (Slow to Fast)

000 - 055

056 - 095

096 - 135

136 - 175

176 - 215

216 - 255

000 - 255

13

AIR5FAN

WASH FX PIX-FX

AIR5FAN

FUNCTION

DMX

Value

17CH 27CH 43CH

11 12 12

Continuous & Color Bounce

Black

Red

Green

Blue

White

Pastel Red

Pastel Green

Pastel BLue

Cyan

Magenta

Yellow

Light Yellow

Light BLue

Light Magenta

Full White

Full White ~ White 3200K

White 3200K ~ White 4200K

White 4200K ~ White 5600K

000 - 000

001 - 013

014 - 027

028 - 041

042 - 055

056 - 069

070 - 083

084 - 097

098 - 111

112 - 125

126 - 139

140 - 153

154 - 167

168 - 181

182 - 195

196 - 225

226 - 235

236 - 255

12 13

RED

0~100%

000 - 255

13 14

GREEN

0~100%

000 - 255

14 15

BLUE

0~100%

000 - 255

15 16

WHITE

0~100%

000 - 255

16 17 13

ZOOM

Big to Small

000 - 255

18 14

PATTERN

On Pattern

Pattern control

Pattern Eect 1~22

Random Pattern Eect 1~22

000 - 015

016 - 031

032 - 229

230 - 255

19 15

PATTERN SPEED

Pattern control

Picture Eect 1-250

Pattern Eect

Static indexing

Forward Slow to fastest

Stop

Reverse Slow to fastest

003 - 252

000 - 037

038 - 144

145 - 148

149 - 255

20 16

Dimmer Transition

Dimmer 0% ~ 100%

000 - 255

21 17

FOREGROUND

NO Function

Foreground color (same as CONTINUOUS PRESETS )

000 - 015

016 - 255

22 18

FOREGROUND DIMMER

Dimmer 0% ~ 100%



000 - 255

AIR5FAN

14

WASH FX PIX-FX

AIR5FAN

FUNCTION

DMX

Value

17CH 27CH 43CH

23 19

FOREGROUND Shutter

Shutter closed

Strobe eect slow to fast

No function (shutter open)

Random strobe eect slow to fast

No function (shutter open)

000 - 010

011 - 163

164 - 174

175 - 244

245 - 255

24 20

BACKGROUND

No Function

Background color (same as CONTINUOUS PRESETS)

000 - 015

016 - 255

25 21

BACKGROUND DIMMER

Dimmer 0% ~ 100% 000 - 255

26 22

BACKGROUND Shutter

Shutter closed

Strobe eect slow to fast

No function (shutter open)

Random strobe eect slow to fast

No function (shutter open)

000 - 010

011 - 163

164 - 174

175 - 244

245 - 255

17 27 23

CONTROL

Normal

Reset All

Pan&Tilt Reset

TBD

Other Reset

Display O

Display On

TBD

Hibernation

TBD

000 - 007

008 - 015

016 - 023

024 - 047

048 - 055

056 - 063

064 - 071

072 - 079

080 - 087

088 -095

096 - 255

24 RED 1 0~100% 000 - 255

25 GREEN 1 0~100% 000 - 255

26 BLUE 1 0~100% 000 - 255

27 WHITE 1 0~100% 000 - 255

. . . . . .

40 RED 5 0~100% 000 - 255

41 GREEN 5 0~100% 000 - 255

42 BLUE 5 0~100% 000 - 255

43 WHITE 5 0~100% 000 - 255

15

AIR5FAN

3.10 DISPLAY SETTINGS

You can change the following parameters related to the display, following the same procedure:

• Press the ENTER button to access the main menu.

• Press the UP / DOWN keys to scroll the menu, select the Setup icon, then press the ENTER button to

enter the next menu.

• Press UP / DOWN to scroll through the menu, then select UI Set, and press the ENTER button to enter

the next menu.

• Press UP / DOWN to scroll through the menu, and then select one of the following settings for the dis-

play and press the ENTER key to display it.

- Back Light - Backlight display Auto O. This feature allows you to automatically turn o the backlight

after a specied time that you can set using the arrow buttons. To have the display always on select

Always On or set a value of 01-99 min to turn o the display after the amount of time you choose.

- Flip Display - Orientation of the display. This function allows you to rotate the display 180° to get a

better view of the display when the unit is hanging upside down. Select ON to activate or OFF to

disable this function.

- Bright Display - Backlight Brightness. Use the arrow buttons to select a value from 0-31.

- Key Lock - Lock keys. With this function, you can lock the buttons on the control panel. If this function

is activated, the keys are automatically locked. To disable or temporarily disable the key lock func-

tion, press the buttons in the following order to regain access to menu commands: UP, DOWN, LEFT,

RIGHT, ENTER. Select ON to activate or OFF to disable.

- Language - Select the display language. This function allows you to select the preferred menu lan-

guage.

• Press the ENTER button to conrm your choice.

• Press the LEFT button repeatedly to exit the menu and save changes.

3.11 SPECIAL FUNCTIONS

For the AIR5FAN you can access the following special functions:

• Press the ENTER button to access the main menu.

• Press the UP/DOWN button to scroll the menu, select the icon Set Up, then press the ENTER button to

enter the next menu.

• Press the UP/DOWN button to scroll through the Fixture menu, then select one of the following informa-

tion and press the ENTER button to display it.

- Theater Mode - Activate this function to set a lower light output with a lower heat and fans operation.

- Fans Mode - Select this function to set the fans operation mode. Use the arrow buttons to select Auto

Speed /High Speed. Press the ENTER button to conrm your choice.

- No Signal - Select this feature to set the preferred mode of operation to be activated in case the drive

is not present no DMX signal input. Press the UP/DOWN button to select the preferred mode of

operation: Close/Hold/Auto/Music. Press the ENTER button to conrm your choice.

- Hibernation - Select this function to activate the standby mode. This function will be activated auto-

matically after a period of inactivity, which is dened by the user. In standby mode, the lamp and

all engines will not be fed if no signal is sent. The unit will automatically reset and will return to

operation as soon as the DMX signal is sent. Select the desired time Min (01-99) through the arrow

keys or select Disable to disable this function, then press the ENTER button to conrm your choice.

• Press the ENTER button to conrm your choice.

• Press the LEFT button repeatedly to exit the menu and save changes.next menu.

• Press the UP/DOWN button to scroll through the menu, select Temperature C/F and press ENTER to con-

rm.

• Press the UP/DOWN button to select the unit of measure Celsius/Fahrenheit and press the ENTER button

to conrm your choice.

AIR5FAN

16

• Press the LEFT button repeatedly to exit the menu and save changes.

3.12 FIXTURE SETTINGS

You can change the parameters for the device by following these steps:

• Press the ENTER button to access the main menu.

• Press the UP/DOWN button to scroll the menu, select the Set icon, then press the ENTER button to enter

the next menu.

• Press the UP/DOWN button to scroll through the menu, then select Movement and press the ENTER but-

ton to enter the next menu.

• Use the UP/DOWN button to select the option proposed and press the ENTER button to conrm the

setting.

- Pan Reverse - Pan rotation in the opposite direction. Select OFF to deactivate the function (normal

setting); ON to activate the function (Pan Reverse).

- Tilt Reverse - Used for reversing tilt movement. Select OFF to deactivate the function (normal setting);

ON to activate the function (Tilt Reverse).

- Pan Degree - Angle of Pan. Select 540° or 630° to set the maximum angle of rotation of the moving

head.

- Feedbacks - Reorganization Pan/Tilt position after rolling away. Select OFF to deactivate or ON to

activate the function.

- Pan/Tilt Mode - Type of movement of the moving head. Select Standard to obtain a fast and uid

movement of Pan/Tilt, Smooth for a slower and softer movement of Pan/Tilt.

• Press the ENTER button to conrm your choice.

• Press the LEFT button repeatedly to exit the menu and save changes.

3.13 LAMP SETTINGS

Reset Functions

You can start a preset program to restore the selected function:

• Press the ENTER button to access the main menu.

• Press the UP/DOWN button to scroll the menu, select the Advanced icon, then press the ENTER button

to enter the next menu.

• Press the UP/DOWN button to scroll through the menu, select Reset and press the ENTER button to

enter the next menu.

• Press the UP/DOWN button to scroll through the menu, then select the function you wish to reset

between All, Pan&Tilt.

• Press the ENTER button to conrm your choice and wait for the recovery of the selected function.

Calibration

Calibration the lamp. This function allows you to modify the parameters of the lamp.

Press the ENTER button to access the main menu.

• Press the UP/DOWN button to scroll the menu, select the Advanced icon, then press the ENTER button

to enter the next menu.

• Press the UP/DOWN button to scroll through the menu, select Calibration and press the ENTER button

to enter the next menu.

• Press the UP/DOWN button to select one of the parameters (Password,Pan, Tilt, 1red,1green,1blue,2red,2

green,2 blue,....) and press ENTER to edit the value (000-255) through the UP/DOWN button (Using the

arrow keys enter the password 050 if asked) and press the ENTER key to conrm.).

• Press the ENTER button to conrm your choice and then press the LEFT button repeatedly to exit the

menu and save changes.

17

AIR5FAN

Reload DEFAULT

Select this function to reset the unit to factory settings:

• Press the ENTER button to access the main menu.

• Press the UP/DOWN button to scroll the menu, select the Advanced icon, then press the ENTER button

to enter the next menu.

• Press the UP/DOWN button to scroll through the menu, select Factory Reload and press the ENTER button

to enter the next menu.

• Press the UP/DOWN button to select YES or NO, then press the ENTER button to conrm.

3.14 FIXTURE INFORMATION

To view all the information on the device, proceed as follows:

• Press the ENTER button to access the main menu.

• Press the UP/DOWN button to scroll the menu, select the icon Information, then press the ENTER but-

ton to enter the next menu.

• Press the UP/DOWN button to scroll through the menu, then select one of the following information

and press the ENTER button to display it.

- Time Information - Through the Time Information function you can display the operating time of the

projector.

- Temperature - Through the Temperature function can be displayed the temperature inside the x-

ture, near the lamp. The temperature can be displayed in degrees Celsius or Fahrenheit.

- Fans Speed - Through the Fans Speed function you can show on display the fan speed present near

the lamp. Velocity is expressed in RPM (revolutions per minute).

- Channel Value - Channel Value function can be used to display the values of the channels by which

the unit will operate when switched on.

- Error Message - Through the Error Message function can be displayed any errors channels.

- Fixture Model - Through the Fixture Model function can be displayed the model number and manu-

facturer.

- Software Version - Through Software Version function you can display the currently installed software

version.

• Press the LEFT button repeatedly to exit the menu.

3.15 OPERATIONS IN AUTOMATIC MODE

The unit independently runs through its show. Before you send an automatic program you need to set the

drive as Master/Alone:

• Press the ENTER button to access the main menu.

• Press the UP/DOWN button to scroll the menu, select the Stand Alone icon, then press the ENTER button

to enter the next menu.

• Press the UP/DOWN button to scroll through the menu, select Play and press the ENTER button to enter

the next menu.

• Press the UP/DOWN button to scroll through the menu, select Sequence and press ENTER to conrm

your choice.

• Press the UP/DOWN button to select the mode of operation:

- Master, if the unit is connected in series with other units and it acts as the Master;

- Alone, if the unit is not connected to other units.

• Press the ENTER button to conrm your choice.

• Press the LEFT button repeatedly to exit the menu and save changes.

The unit will go into automatic mode by executing the program automatically.

AIR5FAN

18

Select Chase

The function Select Chase lets you choose the automatic program to actually run.

• Press the ENTER button to access the main menu.

• Press the UP/DOWN button to scroll the menu, select the Stand Alone icon, then press the ENTER button

to enter the next menu.

• Press the UP/DOWN button to scroll through the menu, select Select Chase and press the ENTER button

to enter the next menu.

• Press the UP/DOWN button to scroll through the menu, then select Chase Part 1/Chase Part 2/Chase Part 3

and press ENTER to conrm.

• Press the UP/DOWN button to select Chase1-Chase8, and press the ENTER button to conrm.

• Press the LEFT button repeatedly to exit the menu and save changes.

Edit Chases

The function Edit Chases allows you to create automatic pre-programmed show.

The automatic programs Chase Part1/2/3 are each divided into Chase1-Chase8. Each Chase can be composed

of 1-64 step that can be congured through the following procedure:

• Press the ENTER button to access the main menu.

• Press the UP/DOWN button to scroll the menu, select the Stand Alone icon, then press the ENTER button

to enter the next menu.

• Press the UP/DOWN button to scroll through the menu, select Edit Chases and press the ENTER button

to enter the next menu.

• Press the UP/DOWN button to scroll through the menu, select Edit Chase 1 - Edit Chase 8, then press the

ENTER button to conrm.

• Press the UP/DOWN button to select the Step 01 - Step 64, and press ENTER to conrm.

• Press the UP/DOWN button to select the Scene you want to set for the Step chosen, and then press

ENTER to conrm.

• Press the LEFT button repeatedly to exit the menu and save changes.

Edit Scenes

The function Edit Scenes allows you to create individual scenes to be included in the Chase Step.

• Press the ENTER button to access the main menu.

• Press the UP/DOWN button to scroll the menu, select the Stand Alone icon, then press the ENTER button

to enter the next menu.

• Press the UP/DOWN button to scroll through the menu, select Edit Scenes and press the ENTER button

to enter the next menu.

• Press the UP/DOWN button to scroll through the menu, select Edit Scene 001 - Edit Scene 250, then press the

ENTER button to conrm.

• Press the UP/DOWN button to select the desired function you want to edit (Control, Tilt, etc..), Then

press the ENTER button to conrm.

• Press the UP/DOWN button to change the value of the function, then press the ENTER button to

conrm.

• Press the LEFT button repeatedly to exit the menu and save changes.

3.16 SLAVE RECEIVE MODE

This mode will allow you to link up the units together without a controller. Choose a unit to function as the

Master. The unit must be the rst unit in line; other units will work as slave with the same eect.

A Master unit can send up to 3 dierent data groups to the Slave units, i.e. a Master unit can start 3 dier-

ent Slave units, which run 3 dierent programs. The Master unit sends the 3 program parts in a continuous

loop.

La pagina sta caricando ...

ProLights AIR5FAN Manuale utente

ProLights AIR5FAN Manuale utente

in altre lingue

Documenti correlati

Altri documenti